Boxed Eau de Cologne Bottle - Potter & Moore's 'Blue Ribbon' brand, with screw and shaped 'gold' cap. Folded paper insert in box - 4 page catalog of Potter & Moore gifts (Mitcham Lavender and 'Christmas Gift Specials'). Australian Distributors - W J Bush & Co. Ltd. Pencil inscription on catalog 6/6 Patterned silver covering to box.. Item has a pin (hat?) pin and hair pin included (no relevance to P & M).personal effects, containers, perfume

Vietnam eraM1 steel helmet used by the United States military from WWII to 1985. Painted textured finish light olive green. The rim edge has a crimped metal band running around it, with a rear seam. Mounted on each side of the helmet there are D shaped swiveled metal loops for a chinstrap. The adjustable chinstrap is made of olive drap coloured nylon webbing with blackened metal clips. A two pice clip system metal fastener is used to connect the two pieces of the chinstrap.On the inside of the helmet is written in black textra the name MORCOM, No 37019, and 1966-67.helmet, headgear

Wooden based Presentation plaque with a RTBU Logo mounted onto the shaped brown finished colour wood block. The presentation label states "Ron Scholten / In appreciation for your loyal membership of 30 years." Presented to Ron following his retirement from Yarra Trams by the Rail Transport and Bus Union. Mad by VF Trainor of 289 Flinders Lane Melbourne. Has the manufacturers label on rear - see image 2. See reg item 931 for an associated certificate.trams, tramways, unions, anniversary, retirements, presentations, rtbu

NoneSeveral plate print. Background images are embossed, showing clouds and abstract water patterns. At centre left is an embossed women's head in profile. Central image is a man in what appears to be a monkey skin. He has a cap on his head and is spinning a barrel-shaped object with the fingers of his right hand. Below him is a light brown etching of grass. Below the grass is a blue etching of water ripples. Mounted in cream matt with blue edging. Wooden frame with glass.Front: "Clouds" 26/65 (centre left) D. Higgins '75 (centre right) (pencil) Back: (no inscriptions)

High waisted bodice, with centre front seam, back opening fastened with metal press-studs, and finished on the right side, with ball-shaped pearl buttons sewn in pairs - six groups of two. A placket extends into the skirt at back, and is fastened with metal press-studs. Bodice is gathered onto skirt at waistline, and defined with a 1.5cm wide tape. An 8.5cm wide cotton lace frill is gathered around the high neckline. The wrist-length sleeves are an extension of the bodice and have a 4cm band, and 4cm wide gathered frill at the wrist. The sleeves are shaped from the high waistline, and also at the cuff edge. The skirt has an overlay of fine lace, made up of six X 17cm wide bands of lace, with a scalloped edge. No shoulder seams. Back opening and centre front seam indicate the cutting out layout of fabric. A one cm wide ribbon finishes the neckline, and the lace frill is hand stitched to the ribbon. Some seams are hand neatened. A 2.5cm wide flat bow finishes the back neckline.costume, female, cream satin and lace wedding dress

Although it is not known where these specimens were collected, Victoria and other regions of Australia were surveyed for sites of potential mineral wealth throughout the 19th Century. The identification of sites containing valuable commodities such as gold, iron ore and gemstones in a locality had the potential to shape the development and history of communities and industries in the area. The discovery of gold in Victoria, for instance, had a significant influence on the development of the area now known as 'the goldfields', including Beechworth; the city of Melbourne and Victoria as a whole. Agate occurs when amygdales (gas pockets) form in the upper levels of basaltic lava flows. If these pockets or bubbles are iniltrated by water bearing silica in solution, the fluid dries and hardens in layers, forming round or egg shaped nodules or geodes within the rocky matrix. Agate is formed of a silica mineral chalcedony similar to quartz. The term carnelian primarily refers to the reddish shading of the stone; whether the stone is termed an agate or chalcedony type is often influenced by the degree of colour banding the specimen shows. The specimens are significant as examples of surveying activity undertaken to assess and direct the development of the mineral resource industries in Victoria and Australia, as well as the movement to expand human knowledge of earth sciences such as mineralogy and geology in the nineteenth century.Three small geological specimens that appear visually consistent with images of rough or unpolished Carnelian Agate or Chalcedony. geological specimen, geology, geology collection, burke museum, beechworth, indigo shire, north-east victoria, gemstones, agate, carnelian

This grappling hook is constructed from two U-shaped lengths of steel pipe, each pinched together in the centre of its arm then the ends spread apart and formed into points. The two pieces are joined with a length of heavy chain, with the end links closed to make the chain into a circle. the hook is usually attached to a rope, chain or pole of suitable length for the job undertaken. Another name for a grappling hook is a grapnel hook. Grappling hooks come in many shapes and sizes and have numerous uses. Some are carried on board vessels and used for pulling things on board or out of the sea, rescuing people from the sea, pulling other vessels closer and moving cargo. They may be used for dredging the seabed for submerged objects. A grapnel anchor can be used to moor or stabilise a vessel. The hook can be thrown out to catch on something, such as a clifftop, and then used for climbing. A form of a grappling hook, a grapnel, can be used for military purposes and is fired from a purpose-built gun or launcher. This grappling hook is an example of equipment used onboard a vessel for safety and functional purposes. Grappling hooks have been used through the centuries and their design has remained basically the same. Grappling hook with four pointed arms. The hook comprises two double-pronged grappling hooks on a chain joined to form a circle. Hooks are made from strong steel.flagstaff hill, maritime village, maritime museum, great ocean road, shipwreck coast, grappling hook, grapple, grapple anchor, marine tool, marine equipment

The evolution of the stiff shirt collar occurred in the 1830s when the detachable collar was "invented." At this time, the detachable collars were simply normal shirt collars like you’d see today, but sold separately from the shirt itself and needed to be kept in a container to keep them clean and accessible. The detachable collars were a way to avoid the weekly laundry. Because collars and cuffs were both the most visible parts of shirts and the parts most likely to get dirty, separating them allowed people to do the shirt equivalent of only washing your armpits after you go to the gym. That meant that the main body of the shirt could remain soft while the collar and cuffs that were visible could be starched and shaped. The popularity of detachable collars and starched collars, in general, began to fade in the 1920s and 30s. As shirt styles began to change. The advent of central heating, lighter weight fabrics, and a more relaxed social attitude to fashion all contributed to making men’s clothes more comfortable and less formal.An item that was used to store detachable men’s shirt collars from the early 20th century at a time when men's fashion was more formal and how a person dressed especially for formal occasions dictated a person's social standing. The subject item comes from a time that gives a snapshot into the past at the social norms of the time.Collar box, leather, cylindrical, includes strap, buckle, stitching and cardboard lining and man's white collarCollar inside box marked "CF652 Rexbilt Size 16 1/2 x 1 3/4" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, collar box, men's collar box, men's collar, leather collar box

Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. Clover, to spare the patient the unpleasantness of induction with his "closed" inhaler (1877), suggested the "mitigated-ether" technique. The inhaler was fitted with a bypass tap for the reception of N2O. The bag was filled with the gas and anaesthesia was inducted a combination of N2O and asphyxiation. Ether was then admitted gradually by rotation of the bowl of the inhaler. When the patient had been duly "weaned over" to ether, the mask was lifted, the N2O allowed to escape, the bag refilled with exhaled air, and normal anaesthesia "a la Clover's inhaler" was continued.Metal domed chamber with a bulb attachment for rebreather bag, including a tap mechanism. Remnants of the paper rebreather bag are attached to the bulb. At the other end is a yellow facemask made of plastic (probably celluloid). The manufacturer's logo has been moulded into the dome of the chamber.Manufacturer's logo: THE HOLBORN / SURGICAL INSTRUMENT CO. LTD. / LONDON •Blue sticker with white writing: O.2.4.joseph clover, mitigated-ether, nitrous oxide, n2o, closed method

Most of the civic and sporting ephemera assembled by Francis Rigg were patriotic buttons. The use of these buttons as a means of raising revenue through patriotic sentiment occurred soon after Australia pledged allegiance to Empire. Buttons reflected ‘public sentiment, courage, patriotism, generosity and several [un- named] virtues’ such as the martyred mother of a ‘fallen’ hero. Attention was paid to attractiveness of design, encoded symbolism and high quality of production. Expressing ‘loyalty’, they were tokens to be kept for perpetuity. Female labour was used to operate the die that compressed the tin backing, photographic print and celluloid cover together. The pin was applied by hand. Women, of all ages, entered into the spirit of voluntary sales. Often they were sold at the entry and exit points of major pedestrian thoroughfares. The women of Kew set up a kiosk in front of the Post Office and the Railway Station to solicit their round, oval and square shaped wares. Pride in salesmanship was affected by publishing the name of the woman and her fiscal achievement in the major newspapers of the day. The badges form part of a collection of ephemera originally purchased by Francis Horace Rigg (19/10/1882-05/03/1946) of 50 Belford Road, Kew (Vic.). Frances Rigg was a local business identity in Kew, ultimately managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street, Kew from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and badges was inherited by his son, Ken Rigg (14/11/1922-19/01/2014). The collection was subsequently donated to the Kew Historical Society in 2015 by his grandson Adrian Rigg during the Gallipoli and Beyond Commemoration.The collection covers a period of almost 40 years. The majority of the badges are patriotic buttons, issued and sold during and immediately after World War 1 to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.The use of common symbols for a range of purposes is sometimes a feature of wartime and post-war fundraising buttons. Like the ‘Hospital Day 1919’ badge, the ‘Come Back to God’ badge is within a seven pointed star on a dark blue ground with sprays of wattle; attempting to harness nationalism with religion.Come back to Godbutton

Most of the civic and sporting ephemera assembled by Francis Rigg were patriotic buttons. The use of these buttons as a means of raising revenue through patriotic sentiment occurred soon after Australia pledged allegiance to Empire. Buttons reflected ‘public sentiment, courage, patriotism, generosity and several [un- named] virtues’ such as the martyred mother of a ‘fallen’ hero. Attention was paid to attractiveness of design, encoded symbolism and high quality of production. Expressing ‘loyalty’, they were tokens to be kept for perpetuity. Female labour was used to operate the die that compressed the tin backing, photographic print and celluloid cover together. The pin was applied by hand. Women, of all ages, entered into the spirit of voluntary sales. Often they were sold at the entry and exit points of major pedestrian thoroughfares. The women of Kew set up a kiosk in front of the Post Office and the Railway Station to solicit their round, oval and square shaped wares. Pride in salesmanship was affected by publishing the name of the woman and her fiscal achievement in the major newspapers of the day. The button forms part of a collection of ephemera originally purchased by Francis Horace Rigg (19/10/1882-05/03/1946) of 50 Belford Road, Kew (Vic.). Frances Rigg was a local business identity in Kew, ultimately managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street, Kew from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and badges was inherited by his son, Ken Rigg (14/11/1922-19/01/2014). The collection was subsequently donated to the Kew Historical Society in 2015 by his grandson Adrian Rigg during the Gallipoli and Beyond Commemoration. The collection covers a period of almost 40 years. The majority of the badges are patriotic buttons, issued and sold during and immediately after World War 1 to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.Round metal button in red, white, blue and gold showing a sun setting over the sea with words printed in red around border and on lower outer rim.hospital day, patriotic buttons, first world war (1914-18)

This photograph was taken during one of a series of workshops that were hosted by the Wooragee Landcare Group in the year 2004. In line with the main goals and missions of the Wooragee Landcare Group, these workshops aimed to promote biodiversity and land protection in the local area. Many of these workshops focused on either the protection of the endangered tiger quoll (spotted-tailed quoll) or the handling of fox infestations. Though the specific date of this photograph is unknown, it can be confirmed that it was taken outside of Wooragee Hall. Pictured from left to right is: Andrew Murray, Jerry Alexander, Tony Prowse. In the photograph, Andrew Murray appears to be demonstrating a specific technique using two tube-shaped devices. Murray's status as one of Victoria's leading authorities in quolls suggests that this particular workshop was centred around tiger quolls (spotted-tailed quolls). The Tiger Quoll is the largest of the quoll species. Largely resembling a cross between a possum and a cat, the quoll is distinctive due to the white spots that are often found all over its brown fur.This photograph is significant as it provides evidence of a project undertaken by the Wooragee Landcare Group to educate members of the public on the tiger quoll in the early 2000s in an attempt to better understand and protect the species. The Wooragee Landcare Group has been instrumental in the co-ordination of programs relating to biodiversity protection in the local area, providing great assistance to landholders.Landscape coloured photograph printed on gloss paper.Reverse: WAN NAO1EONAON2. NNN+ 1 1981 /

Context: A brace is a hand tool used with a bit (drill bit or auger) to drill holes, usually in wood. The pressure is applied to the top and the tool is rotated with a U-shaped grip. Bits used to come in a variety of types but today the more commonly used Ridgeway and Irwin pattern bits also rely on a snail point (called the snail), which is a tapered screw point shaped the same as a wood screw thread, which helps to pull the bit into the wood as the user turns the brace handle and applies pressure. The designs used today come from an original idea and pattern invented by John S Fray. Company History: John S. Fray (1833 ) immigrated to Bridgeport Connecticut USA from England in the 1850s and established a working relationship with Nelson Spofford, who held an 1858 patent for a bit brace (the tool could be augured in a continuous circular motion by hand). He established the John S. Fray Co. around the same time and immediately began producing the Spofford bit brace. Fray himself held at least two patents: one awarded in 1869 for a boring brace attachment, and another awarded in 1883 for a tool handle. By 1889, the firm was located at the industrial complex that sits between the former International Silver Company and the former Bridgeport Chain Company on Crescent Avenue and is identified on the Sanborn Insurance Atlas as a manufacturer of Spofford bit braces, hollow handle awl, and toolsets. The company was in competition with Peck Stow and Wilcox Co. of Southington, and in 1898 was enjoined from making a ratchet bit brace for which the latter company held a patent. By the 1920s, the factory had been purchased by the Stanley Company of New Britain and leased to the American Tube and Stamping Company, a manufacturer of brass, copper, seamless, and bicycle tubing, which also ran a rolling mill to the south on Stafford Avenue (now demolished). The Stanley Company bought both mills in 1926, perhaps as a strategic move to be located along the Bridgeport Harbour, through which much of the raw material used in its operations throughout the state came. By the 1950s, the Crescent Avenue operations had been moved to other sites in Connecticut, and Stanley again leased the building to a company called Cornwall and Patterson, a manufacturer of piano hardware. Today the building appears to be vacant. An early carpenters tool made by a well known early manufacturer from America who instigated many innovations to the making of tools. His early pattern for the improvement of a tool that could be used for the boring of holes in wood was a significant step forward. His design for a boring brace attachment and later a specific handle is still in use today and his original brace and bit is now sought after by collectors of antique tools. Spofford Carpenter's Bit Brace metal has bit attached. Wing nut holds bit in place but nut missing. holds bit in place. 285mm long x 160mm Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This is an early model of a hand-held juice extractor. It is a household item that is probably over 100 years old.This juice extractor has no known local provenance but it is an interesting item and useful for display. This juice extractor has a brass ring with a handle. Sitting in the ring is a heavy glass container with a concave base and a ridge inner base moulded in a shape to fit a whole or a half of a lemon or orange or other fruit or vegetable. The rim of the glass has two pieces broken off. Attached to the brass base is a metal scoop-shaped dish with a handle. The handle pushes up and down into the glass container to put pressure on the object in the glass container to extract the juice. The scoop section has the maker’s name on the front. ‘Williams’ history of warrnambool, social history, hand held juicer

This item belonged to Dr Horace Iles Holmes (1877-1959). He was born and educated in Tasmania and completed a medical degree at Melbourne University. He commenced a medical practice in Warrnambool in 1906 and was the Honorary Medical Officer at the Warrnambool Hospital and Warrnambool’s Health Officer. His practice was at ‘Ierne’ at the corner of Spence and Kepler Streets. Dr Holmes was an early member of the Royal Australian College of Surgeons and was prominent in Warrnambool community affairs (foundation President of the Warrnambool Rotary Club, a member of the local Masonic Lodge for over 50 years, a Warrnambool Hospital Committee member, a long-term Trustee of the Warrnambool Methodist Church and President of the Lyndoch Hostel for the Aged Committee). Dr Holmes also had many recreational interests, including fishing, bowls and golf. This item is of considerable interest as one coming from the collection of Horace Iles Holmes, a doctor who was prominently associated with the professional and community life of Warrnambool for well over 50 years..1 This is a cylindrical-shaped brown leather case with white stitching along the sides and at the ends. The top end has a leather lid attached to the body of the case with a metal pin. The leather attachment here is broken away. On the side of the case is a leather handle. The case is much scuffed. .2 This is a metal tripod with three legs and pointed ends for embedding into the ground area. The three legs sit on a rounded metal top with a screw for attachment to a camera. The metal top has white printing. The top part of the tripod is slightly rusted. ‘Normal Marque Deposee’warrnambool, dr horace holmes, photographic accessories, history of warrnambool

This collar holder would have been used in the early to mid 20th century in the days when men's shirts often had detachable collars so that the collars could be changed each day and the shirt part would not have to be washed so frequently. The metal crest on the holder with a crown on top suggests that the wearer of the detachable collars could have held a Government office or been a member of one of the Defence Forces. This collar holder has no known local provenance but is kept as a memento of the days (80 to 100 years ago and more) when men wore shirts with detachable collars. This is a rectangular-shaped leather object which has been folded over once to form a wallet with an extra piece at the end to close over the wallet. The top piece closing device has two metal press studs. The insides of the wallet are lined with buff-coloured material hemmed with cotton stitching with two extra pieces folding over to hold the collars. The wallet contains one white collar with one collar stud. On the front of the wallet is gold-coloured printing and attached is a metal badge or crest. 'Soft Collars'men's vintage clothing, warrnambool, collar

This 20th century business machine was used by the firm of D.H.Wood Motors of 169 Koroit Street Warrnambool. This firm advertised that it sold mainly Peugeot and Studebaker cars and Hillman and Humber cars and commercial trucks. This machine has local provenance as it came from the 20th century business of D.H.Wood Motors. It also has some historical interest as an example of a business or office machine used in the early to mid 20th century before the general use of computers. This is a grey rectangular-shaped metal box with rounded edges. The box has four metal studs on the base to keep the box stable. The box has a hinged section for the insertion of the paper dockets and a turning mechanism for removing the dockets, one at a time from a slot at the top of the machine. The dockets have a white (customer's) copy and a pink duplicate copy for the business to file. Two of the dockets have been removed from the machine to show the contents. The number of dockets in the machine is unknown. The metal surface of the machine is rubbed and rusty and the paper is stained. 'Paragon' 'D.H.Wood Motors, 169 Koroit Street, Warrnambool' 'Lamson Paragon Limited Wiz Register' vintage business machines, warrnambool

The containers in this set would have held salt, pepper, and perhaps two types of vinegar. When bought some time in the 20th century it was a high quality item and would have been found in the home of a person of some means and perhaps used when visitors were being entertained. Today a simple salt and pepper set is more likely to be used during meals. This cruet set has no known local provenance but it is a very attractive item and is kept as a memento of the past. This cruet set has a metal base with four round metal knobs on the bottom. The base has a handle in a bowed shape with a circular top and midway across the handle are attached four rectangular metal shapes for holding the condiments. Four cut glass containers slot into the four holders. The containers are all rectangular-shaped, two with a narrower neck and a glass stoppers, one with a narrower neck and a metal top with a perforated lid and one with a metal top with a hinged lid. The metal base and handle are somewhat rusted.household items, history of warrnambool

This folder contains photographs, advertisements and a sample of a piece of blanket from the Warrnambool Woollen Mill. This mill was officially opened in South Warrnambool in 1910 following the establishment of a local public company. The first manager was John Bennett from Yorkshire, England. The operations of the mill expanded with new buildings enabling the business to double in size by 1915. In the 1940s the factory was employing 700 people. In 1968 the factory was sold to Dunlop Australia but was sold again in 1982 to Onkaparinga Woollen Company. In 1983 Mcquarie Worsteds took over the factory with the business then known as Warrnambool Textiles. In 2000 the mill closed and most of the buildings were later demolished for a housing estate. This item is an attractive and informative memento of one of Warrnambool’s most important businesses of the past. The Warrnambool Woollen Mill operated for 90 years and employed many local people. The photographs are of particular interest.This is a rectangular-shaped sheet of buff-coloured lightweight cardboard. It has been folded twice to create six pages in a folder. Three pages contain black and white photographs of the woollen mill operations and two pages contain advertising material with black and white images. One page has a cream blanket piece of material attached to the page by two staples and this has the brand name stitched onto the right hand corner This piece of blanket also has a paper guarantee card attached by staples. The Warrnambool Woollen Mill Co. Ltd. South Warrnambool The 100% Wool Warrnambool Super Blanket Made in Australia warrnambool woollen mill, history of warrnambool

These two badges came from the estate of Dorothy and Agnes Ardlie of Warrnambool. Dorothy Ardlie (1910-1993) and Agnes Ardlie (1915-1993) were the daughters of Arthur and Ethel Ardlie of Warrnambool, the granddaughters of the prominent Warrnambool lawyer, William Ardlie and his wife Mary and the great granddaughters of John and Mary Ardlie, pioneer settlers in Warrnambool. The badges appear to have belonged to Agnes Ardlie who was known to have been a keen sportswoman. The Warrnambool Racing Club was founded in the 1870s and annually produced badges for members, both men and women. Female membership of the Warrnambool Golf Club was well established by 1890 and the course then was in Albert Park. These two badges are of interest as having local provenance, belonging to a member or members of a prominent family in Warrnambool in the mid 20th century..1 This is a metal badge in an elliptical shape with gold edging. The image on the badge shows a horse and jockey clearing a hurdle with wording around the image. The colours used are blue, red, gold and green. The badge has a metal clip at the top with a blue cord attached. The back of the badge has wording imprinted on it. .2 This is an oval-shaped metal badge with an image of two golf clubs in blue and gold and the word ‘Associates’ in gold and green. On the back is a metal clip and some hand writing scratched on. The maker’s name cannot be deciphered. .1 Warrnambool Racing Club Not Transferable Season 1965-66 9 Stokes .2 Warrnambool G.C. Associates Ardlie A.A. ardlie family, history of warrnambool

This camera is a Premo model made early in the 20th century by the Eastman Kodak company of U.S.A. Premo model cameras were produced in three sizes. Box cameras such as this were produced up to the mid 1920s and were popular with amateur photographers because of the simplicity of the mechanism. This camera has no known local provenance but is retained for display purposes.This is a rectangular-shaped wooden box covered with a black leather trim. On one side is a leather handle attached by two metal buttons. The lid was originally opened by two metal clips at one end and two metal hinges at the other but most of these attachments are now missing. Recessed into the lid are two compartments for storing the film plates. Inside the lid is a glass plate covering the storage area and a spring-loaded lens mechanism with a glass lens and a pleated cloth attached to this lens. The leather on the outside of the box is somewhat scuffed and torn.‘The Premo Camera Made in U.S.A.’ ‘Manufactured by Eastman Kodak Co. Successor to Rochester Optical Co. Rochester N.Y. U.S.A.’

Items in the collection re Ian McLeod RWAFF, refer Cat No 2262.2 for service details..1) Badge, pressed metal, gold colour, flame over coat of arms. .2) Badge, pressed metal, brass colour, 8 star shaped with cross in centre .3) Badge, metal, gold colour, sphinx over castle, "Eygpt The Essex Regt" .4) Badge, metal, gold colour, lion,m 3 plaques, letters E.M.E .5) Badge, metal, gold colour, lion over coast of arms .6) Badge, metal blackened, ship over scroll, "2nd Punjab Regt"badges, collection

Badges belonged to Thomas Henry ISER V24933 and VX102660 2nd AIF. Refer Cat No 383.2 for his service history..1,.2) Badge, "AUSTRALIA" shoulder, blackend brass with brass split pin. .3,.4) Crown shaped metal badge signifying rank of major with brass back plate holding maroon velvet, plush fabric, dark bronze with split pins. .5,.6 & 7) Badge, rank "pip" officer with brass split pins. central circle with three acorns surrounded by circle bearing motto, a third circle has a chain and this whole section is squared off with stylised leaves or feathers making a pointed edge"TRIA JUNGTA IN UNO" motto surrounding acorns in reliefnumismatics-badges-military, army uniform

Part of 'Woolcock Gallery Collection' Exhibited CEMA 1989.Drawings of a flowering plant stem with flower details. On left is a flowering stem, with a woody central stem, small heart-shaped leaves and yellow and orange pea flowers. To right are studies of leaves and flowers: (t-b) top view of flower (yellow); flower detail; side view of flower; top and underside views of leaves; side view of bud. Each view is labelled in pencil and in typed letters affixed to paper. Mounted in double matt (white on faun) in glazed wooden frame with gold detail.Front: Pultenaea scabra (lower left) (pencil) Back: 30 (upper left) (pen)collin woolcock, botanical, woolcock collection, cema

This cast iron kitchen appliance was made in England in the early 1900's and shipped to the "colony" Australia. This was before World War II and the "growing up" of a colony to an independent member of "the British Commonwealth". It was a period when most appliances (be they household) where manufactured in England and shipped to Australian ports. It was not until the late 1960's that the Asian manufacturing giant woke up and started to dominate the market palce.This domestic kitchen appliance is very significant to the Kiewa Valley because it highlights the "made at home" period when food processing was made "in house" due to inability to source food from specialised shops e.g. the butcher or slaughter houses. It was a period before mass food processing factories were established and roads constructed up to the standard for distribution to semi remote regions such as Kiewa Valley was in the beginning of the 1900's.This cast iron (malleable iron) mincer for meat products has a large "funnel" to direct "chunks" of meat to the grinding "wheels". These "star" shaped wheels with "teeth" of three different cutting surfaces (fine, medium and coarse) provide for texture types of the final meat product. The meat is placed into the "loading" funnel and push downwards(gravity feed) through the mincing chamber and out through the front side. There is a long "screw worm" which is rotated by turning the handle. The appliance is table mounted by a vice "G" screw on clamp (hand operated). "BEATRICE No. 3" and "MADE IN ENGLAND", "P 3181"household cast iron appliances, food processors

These badges are unused and were possibly available for those guides who took part in the various camps or became new members. they were designed to sew on to the guide uniforms or blankets. Nancye Wallace (nee Warren) was a Guide leader.Established in 1910, Girl Guiding is now one of the largest all female organisations in the world. It is designed for girls, young and not-so-young women to join and enjoy a program of informal learning, opportunities, fun, personal development and friendship. (ref. Girl Guides Victoria). These badges used by an Orbost local reflects the history of that organisation in Orbost.Twelve cloth badges. They are unused Girl Guide badges. two are round with a black background and inside a red circle is a wattle tree. One is round with a variegated fairy wren inside a red circle. One is rectangular with an eastern rosella inside a red circle. There are four smaller square shaped badges (cut from a strip) with gold, and red print on a blue background - " 1910 Girl Guides Jubilee 1960". One is a rectangular Camp Kindamindi badge and there are three rectangular strips, white with blue print "1st Orbost".badges-cloth girl-guides

The anchor is one of four that were carried by the FALLS OF HALLADALE when she was wrecked near Peterborough in 1908. This Rodger’s Anchor was raised from the wreck site by Flagstaff Hill divers (Peter Ronald, Colin Goodall and Gary Hayden) in 1974 and is on permanent outdoor display at the Maritime Village. The imposing 2-tonne artefact required a raft of fourteen 44-gallon drums to raise it from the seabed before it was towed by a crayfish boat to the wharf crane at Port Campbell for loading onto land transport. Following Lieutenant William Rodger’s patent in 1831, anchor design moved away from the separate attachment of straight arms and flat flutes to each side of a long shaft. Rodger’s innovation included the forging of both arms and their flutes as a single uniformly curved piece which was then attached to the crown of the shank by a thick horizontal bolt. The two-inch diameter hole for the securing through-bolt at the crown is clearly visible in this example, the bolt dislodged by corrosion and now missing. The FALLS OF HALLADALE was a four-masted, iron-hulled barque, built by Russell and Co at Greenock in 1866 for the Falls Line of Wright & Breakenridge, Glasgow. The ship was 275 feet long, 42 feet wide, with a 24 feet draft and weighed 2,085 tonnes. She was built to carry as much cargo as possible rather than for speed. Her unmistakably square bilge earned her the title of “warehouse-type” ship and her iron masts and wire rigging enabled her to maintain full sail even in gale conditions. In 1908, with new sails, 29 crew, and 2800 tons of cargo in her hold, the FALLS OF HALLADALE left New York, bound for Melbourne and Sydney via the Cape of Good Hope. 102 days later, at 3 am on the 14th of November, under full sail and in calm seas, with a six knots breeze behind and a misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a shelf of rock near Peterborough. There she stayed for nearly two months until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000-ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four-masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for the Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on the south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire.The shipwreck of the FALLS OF HALLADALE is of state significance – Victorian Heritage Register No. S255. She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).A large iron Rodger’s anchor recovered from the wreck of the FALLS OF HALLADALE. It has a rounded crown, curved arms and moulded flutes. Heavy duty iron stock with round eyes at either end, fitted over shank and fixed into position by a wedge-shaped metal locking pin. Shackle missing but severed securing bolt remaining in shank. The presence of an empty bolthole at the crown junction of shank and arms confirms Rodger’s type. Corroded from 66 years submersion in seawater but otherwise structure is sound.warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, falls of halladale, rodger’s anchor, peterborough reef, 1908 shipwreck, anchor, last days of sail, great clipper ships