Bought by Valda Arrowsmith during 1980sBeaded handbag. Background beading is in small grey beads. There are four square sections on each side with coloured beads forming geometric patterns in red, green, pink and white beads. There are two handles which are beaded in small grey beads with grey silk lining. The bag is lined with grey silk. There is a zipped compartment inside and a metal clip to close it.costume accessories, female

Miner's Pick - Long metal shaft with two pointed ends and hole formed in middle for a handle.mining, prospecting

Metal pick with sharp edge and large hole formed for handle.mining, equipment

The Cross of Honour of the German Mother (German: Ehrenkreuz der Deutschen Mutter), referred to colloquially as the Mutterehrenkreuz (Mother's Cross of Honour) or simply Mutterkreuz (Mother's Cross), was a state decoration conferred by the government of the German Reich to honour a Reichsdeutsche German mother for exceptional merit to the German nation.Eligibility later extended to include Volksdeutsche (ethnic German) mothers from, for example, Austria and Sudetenland, that had earlier been incorporated into the German Reich. The decoration was conferred from 1939 until 1945[5] in three classes: bronze, silver, and gold, to Reichsdeutsche mothers who exhibited probity, exemplary motherhood, and who conceived and raised at least four or more children in the role of a parent. A similar practice, that continues to this present day, was already established in France since 1920, by conferring the Médaille de la Famille française (Medal of the French Family), a tribute to the French mother who raised several children in an appropriate way.The cross design is a slender elongated form of the Iron Cross or cross pattée and very similar in design to the Marian Cross of the Teutonic Knights Order (Marianerkreuz des Deutschen Ritterordens), enamelled translucent-blue with a slim opaque-white border. Resting on the centre radiant starburst rays is a metal roundel decorated with the words ”DER DEUTSCHEN MUTTER” (In English: TO THE GERMAN MOTHER) around an enamelled black straight centred “swastika” symbol, infilled white enamel. Der Deutchen Mutter on front 16 Dezember 1938 by H...… ??german medal, the cross of honour of the german mother, ehrenkreuz der deutschen mutter, mutterehrenkreuz, reich, third reich, german reich, mutterkreuz

The Returned Sailors and Soldiers Imperial League of Australia (RSSILA) was the forerunner of today's Returned and Services League (RSL). Formed after the First World War, the organisation was a veterans' association formed by returned servicemen to care for and advocate for the returned service community. The organisation later changed its name to the RSL. This badge is dated to the 1920's by the name of the organisation. It is significant because it has the capacity to represent an earlier incarnation of today's RSL.Small blue, white and red enamel and metal badge. Inset embossing of two soldiers advancing. Words enscribed on the front. A white shield shape with a crown mounted on the top.Returned Sailors & Soldiers Imperial League Australia.rsl, rssila, returned services

Cardboard & plastic school case with hinged lid. Metal handle. Metal latchesInside: Jennifer Wright Form IVeducation, school, school case

John Lundy-Clarke grew up in the Kalorama/Mt Dandenong area and later in life (1972-74) began to write a comprehensive history of the district working from an original settlement map in an effort to cover all areas. Edward John Price (Ted)(1899-1974) was the third child of Edward Joseph and Annie Price. He lived a very industrious life in the area. When the new CRB road cut through the family land Edward John established a Corn and Produce store on a level area adjoining the new road . Along with his brother Charlie, Ted took up road contracting and formed Grange Road in 1923. They also took up contracts to metal the CRB road between The Gap and Olinda. Edward John married Myra Wilson in 1930. They lived in the first brick home built in the district. They had two sons, Edward Joseph 2nd and Alan.Black and white photograph showing an old man dressed in a jacket holding the reins of a horse. Reverse of photograph has handwritten description by John Lundy-Clarke.Edward John Price 1973. Son of Edward Joseph & Annie Ada nee Ross. Born 1899 died 1974. Farmer, Carrier, Sawmiller, Contractor, Quarry Owner, Shop Proprietor (Kew Junction 1935). Father of Alan & Edward J.edward john price, myra wilson, edward joseph price, annie price, alan price, charles price, grange road, crb road

Scene looking down Farringdon Road showing Jeeves horse drawn coach going along the CRB road (Mt Dandenong Tourist Road) in 1920. Detailed inscription on the back handwritten by John Lundy-Clarke in 1974.Jeeves Coach on CRB road at foot of Farringdon Road Kalorama (Mt Dandenong North) 1920. Road was formed most of the length from Montrose by contractors Bladin and Dick employing Robert Logan the younger, in 1919 and lay unmetalled till metalled by the contractors in 1922. Mountain ash trees in foreground were on Thomas Hand’s original 23 acre holding. Those beyond coach were on Isaac Jeeves original 160 acre holding Selection Crown Allotment 925(B). This was the area forming part of the inheritance lost by John William Richardson because of the expense of his wife’s illness. Hand enlarged his 23 acres to 305 in 1874. William and his family grew large crops of raspberries on his area, part of which is in the foreground. It had been cleared by his father’s employees before 1877. The section below the Main Road was cultivated by Fred hand, son of William and grandson of Thomas in the twenties before he moved to Redcliffes where he is today (1974). Comment by John Lundy-Clarke 10.5.1974 coach service, jeeves, crb road, farringdon road, kalorama, mt dandenong north, mt dandenong tourist road, john lundy-clarke, coach

The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Red fabric covered display board with 8/13 Victorian Mounted Rifles hat badge, two lapel badges and two metal shoulder titles. Item 2491 co-located is a similar object.badge, vmr, victorian

The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Framed fabric backed display board with 8/13 Victorian Mounted Rifles hat badge, metal epaulet titles and fabric shoulder title.vmr, badge, title

8th (Indi) Light Horse was an antecedent of the 8/13th Victorian Mounted Rifles. 8/13 VMR linked with 4/19 PWLH to form a new regiment of two squadrons one of which was VMR Squadron.Example of community support for citizen soldiersWooden shield with metal embellishments intended for section shooting competition. Used 1929-1930 by 8th (Indi) Light Horse; then 8th 13 Victorian Mounted Rifles 1975-1976 and lastly VMR Squadron 4/19 Prince of Wales's Light Horse 1991-1994.Presented by Lieut Col A J Staughton for best section shooting 1929.staughton a j, vmr squadron

This uniform was worn by members of 8/13 Victorian Mounted Rifles from its formation in 1948 until replaced by battle dress and braided yellow lanyard. The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Khaki World War Two style service dress jacket with two-colour platted lanyard, metal buttons, rising sun collar badges, metal 'Australia' titles on epaulettes. Teamed with khaki webbing belt. Mounted on half mannequin.uniform, citizen military forces, cmf, armour, vmr

A tilt-top real tennis racquet, with solid convex throat, and extra long fine-grooved handle/shaft. Protruding end wrap formed from long piece of leather strip. Materials: Wood, Lacquer, Glue, Metal, Gut, Leathertennis

Cricket award in the form of a rectangular block of wood with a small metal badge with engraved text nailed into the side. Presented to MURRAY HILL 5 wkts-20 runs Inc Hat Trick W.T.S. v B.H.S 24.3.66

Formed in 1885, Victorian Mounted Rifles companies were recruited in rural centres, including Wangaratta. Members of country rifle clubs formed a significant component. They were semi-professional: only a small allowance was paid to members. Mounted Riflemen were required to provide their own mount. Not to be confused with similarly named contingents to the Boer War. Part of the Victorian Colonial Military Forces - the umbrella term for organized Victorian (non-British) pre-colonial military activity. Red stained and lacquered wood shield with a silver metal Victoria mounted rifles symbol in the centre.VICTORIA MOUNTED RIFLES

Block of 50 tickets - black ink on dark grey card, SEC Provincial tramways, Staff (employee) ticket, lettered Aa 002900 to Aa 002949, headed State Electricity Commission of Victoria, Electricity Supply Department, Provincial Tramways. The 50 tickets have been stapled within red card covers with a heavy metal staple and perforated 21mm from left hand edge. The ticket number is in black ink. The ticket could only be used by SEC employees on Commission business, was not transferable and only good for a single trip. Has form number "TYE 2-19". Ticket when detached is 32H x 62W.trams, tramways, secv, tickets, staff tickets, passes

Block of about 170 tickets - black ink on grey 60 gsm paper, denomination 1d (printed in red), numbered Ab975017 to Ab975199, headed State Electricity Commission of Victoria, Electricity Supply Department, Provincial Tramways. Originally a block of 200 tickets been stapled onto a heavy cardboard back with a heavy metal staple and a small cardboard retaining strip at the top of the ticket. The ticket number is in black ink while the "Ab" prefix is in red. On each side various codes when clipped denoted the destination or section the ticket was validated for. Tickets 975003, 4 and 5 are loose. Tickets Nos - 975026 to 037 have been torn out prior to collection. Each ticket in block has been punched to form a round hole or part to cancel the ticket. Thought to be used prior to 1950's around the second world war. See Reg. Item 230, 3d ticket in top left hand corner of page 27, has a note "wartime" written under it.trams, tramways, secv, tickets, parcels

67 page document on the results of surveys done on Ballarat passenger services in late 1977 and early 1978, dated 2/78. Has survey forms, procedures, questionnaire, results etc. Table of contents, appendices. Printed onto duplicating paper. Single metal paper fastener in top left hand corner.trams, tramways, ballarat, bus services, surveys

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Collins Australian Diary, No. 324 printed by Collins Bros, dark blue card covers, sewn sections with ruled sheets providing a diary for 1971, one week per double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc. Names of gang often mentioned in the diary undertaking specific jobs and when on leave. Last day work recorded - 24/9/1072. Loose contents Inside front cover Workshop requisition to fill pot holes and note re rail requirements for Daylesford and Hamilton. Clip to page with metal paper clip. 29/8/1971 - note re account numbers and on rear of a pink requisition form - work list for gang. 12/9/1971 - Workshop Requisition form - green dated 6/5/1971 Inside rear cover Circular for a Male Cleaner in Traralgon Workshop Requisition for work at the Zone substation - Ballarat South Circular to authorised drivers re used of defective vehicles. Has W. Vermeend name typed in top left hand corner. SEC Long Service Regulations circular - has name D.Wiseman handwritten in top right hand corner. 5 sheets of blue carbon paper.tram, trams, sec, ballarat, depot, trackwork

One Hundred & Eight (108) page book sewn with end papers on a grey colour Rexene heavy card covers. Titled "Melbourne and Metropolitan Tramways Board / Electric Tramways and Motor Omnibuses. / Sections and Fares / (Conductors) , / August 1966". Issued 14/8/1966, all decimal currency. Signed by R.C. Drummond, Traffic Manager. Details the sections and fares for each tram and bus route on the MMTB System in a tabular form. Page 5 has an index of routes, includes concession fares. General Instructions re fares, such as children, city concession, prepaid tickets, round trip excursion, Scholars concession, excess luggage, newspapers, children carriages, dental centre scholars, swimming class, state schools, Post Office, Police Concession, special hospital tickets, visiting nurses, scouts, Sunday morning, family excursions. all night services and Free Tramway Passes. Gives images of the type of pass, details of issued to, booklet passes, employees pass, blind persons, traffic officers, disabled soldiers, fare concession certificates, Special Metal "T" passes, seeing eye dogs. special prepaid tickets. Has some pasted in amendments.Some of the tables, first ones in the book have been marked with the stop numbers. trams, tramways, rules, instructions, mmtb, fares, conductors

Demonstrates, yields information and has a strong association with the individual conductors on the day that the revenue journals were compiled. Shows the total revenue and passengers and how the passengers were counted. Demonstrates the system used to compile revenue returns and passenger numbers.Set of 34 completed "Revenue Journals", for recording the value of tickets sold by Conductors. Compiled for the 11/3/1971, "D" tin. Shows how the forms were completed and who was on duty that day. Have been signed by each conductor. Numbers of checks issued varies from 6 to 499. Outfit 41D has notes regarding a school passenger. Gives the totals, cash returned and overs/under amounts. Has a metal folding pin near the top left hand corner of the sheet, with the cover giving details of the outfit and date. Each sheet provides the opening and close numbers, See Reg Item 3063 for the blank form and form details.trams, tramways, tickets, accounting, revenue journal, conductors, sec

Yields information about the process of preparing lists of ex MMTB tramcars that were used in Ballarat and demonstrates the record keeping of the SEC in relation to time worked by employees.List of Ballarat Tramcar numbers against their original MMTB numbers which have then been ticked off. Written on the back of an SEC Daily Time Sheet for the Afternoon Shift - form No. FTK 2-1-2 - printed in red on off white paper. Item was contained within Reg Item 5507 - Foolscap binder with green covers, black binding edge and metal clips - see btm5507-list.pdf for actual location. trams, tramways, sec, wages, tramcars, mmtb

Private Edward Connor (Service No: 2597) embarked 27/10/1915 from ??? He threw the bottle overboard (containing the message) from the Transport ship HMAT A38 enroute to ??? The bottle was found at ??? and returned to his mother, Mrs Martha Connor, Bromfield Street, Colac. Message reads ................?significant historical itemGlass bottle with metal screw top. This item forms part of the Connor Family Collection Schweppes brand bottle. Green in colourww1 service man sent a message to his mother in a glass bottle

Switches from HMAS Canberra taken prior to scuttling in October 2009Ex HMAS Canberra was the first ex naval vessel to be scuttled off Barwon Heads to form an artificial reef and to facilitate recreational diving.3 Marine Alarm Switches on metal frame; General, Unknown usage, Collision AlarmContact Type S-2JRM3A-2switches, navy ships, hmas canberra

The badge belonged to John Arnold Seitz who attended Scotch from 1914 until ?. The badge and hat band would have been attached to a staw boater worn by students to the Head of the River Boat Races. Oval shaped badge of gold coloured metal and enamel with crossed oars coming up from the a banner at the bottom of the badge. The oval is formed by a buckled belt of dark blue within this on dark red background is a seated scholar. A pin is on the back to Inscription on badge "DEO PATRIAE LITTERIS/ HEAD OF RIVER RACES". Verso STOKES & SONS MELB 811/?? (numbers are difficult to decipher)clothing, gold, 1914, badge, accesory, headware, scotchcollege, seitz john arnold, maroon, blue boat races, head of the river, crossed oars, hatband

Containers like these were used to hold water for miners working underground. In mines the word "crib" refers to a meal break time. A crib tin would have accompanied the crib bottle. The word "crib" is probably of Cornish origin.A metal container 38 centimetres high and 16 centimetres wide made in three sections with a half centimetre thick metal handle that extends ten centimetres above the container. the bottom section is an oval shape 16 centimetres by 12 centimetres and is 18 centimetres high it is reinforced with two two centimetre wide straps crossing the bottom and extends six centimetres up the sides and is secured with rivets. The next section is a conical shape that extends for eight centimetres and finishes forming a four centimetre circle. A four centimetre tube extends for 12 centimetres.The handle is a 27 centimetres high loop of half centimetre round metal and is attached to the conical section of the container. metal container, crib bottle, miner's water container

Ore bearing rock brought out of the mine was crushed at the battery by heavy metal stampers and the fine material passed over copper pates coated with mercury. Gold particles would combine with the mercury forming an amalgam which was then scrapped off the copper plates and put into the amalgam bucket ready for retorting too extract the gold. The amalgam of mercury and gold was placed into the retort which was heated to evaporate the mercury. The mercury cooled as it ran down the pipe which was recovered to be reused leaving the gold behind. The gold would later be put into a crucible and heated to burn of impurities and the molten pure gold poured into an ingot.A heavy cast iron bucket 20 centimetres high, 16 centimetres in diameter at its base and 22 centimetres diameter at the top. It has a spout five centimetres wide protruding two centimetres. There is a handle which is a semi- circular shape 19 centimetre wide extending 14 centimetres above the bucket The inside of the bucket has an enamel coating. amalgam bucket, bendigo gold, gold retort

This kettle was made in the 1880s.Cast iron kettle 16 centimetres diameter at its base and 18 centimeters diameter at its widest point 11 centimeters above the base, it then curves up another three centimetres where there is a ten centimetre diameter hole. A non-matching metal lid with a one and a half centimetre knob covers the hole. Three centimetres from the base of the kettle there is a two and a half centimetre diameter spout which tappers to one and a half centimetres, it's 14 centimetres long and has two bends. A handle is attached to the top of the kettle, it is two centimetres wide, it extends two centimetres straight up at both ends that are 12 centimetres apart then forms an open oval 20 centimetres wide and nine centimetres high, it's one and a half centimetres thick for 11 centimetres at the top and has groves for fingers on the under edge.K23.1kettle, cast iron