1099.1 - photocopy of an article in The Courier, Ballarat Tuesday Feb. 9 1988, page 17 of the house that contained Ballarat ESCo tram No. 12 in the Tuesday Heritage Column of the newspaper. Contains a photograph of the house containing the tramcar. Newspaper Clipping details the former occupiers, the Rayner family, the construction of the extensions around the tramcar, family use, family history and some details of the family members and other local history. The copy of the newspaper Clipping has numerous pin holes in the corner and the rust marks due to use on a display on Tram No. 12 in a display board in the depot from about 1991 to 1998. From a copy made from the newspaper Clipping collection held by Alan Bradley. 1099.2 - copy made March 1999 of the same Clipping for record purposes and to have a good copy. (2 copies held). Also has a review by John Hindle of the "Storming St. Kilda by Tram", presented by TheatreWorks aboard a special tram for St. Kilda, from the Herald Newspaper dated 15/3/1988. Collected by Alan Bradley.trams, tramways, nerrina, rayner family, theatre, esco

Set of 9 mixed SEC tickets ex Bendigo, donated by Peter. W. Watt. Tickets do not appear to have been used in traffic - no punch marks. Tickets have not been individually numbered with the Registration Number, but can be identified by their ticket number and denomination. All on off white paper unless otherwise noted with a tartan style back unless noted. 3d - 1 -000001- orange paper, plain back, green ink price, black printing and number. 3d - City Section - A 167759 - light orange printing, over stamped in black ink. 2d - City Section - A 181409 - red print, over stamped in black ink. 4d - Z207011 - light brown printing, black number. 5d - B886009 - light green printing, black number. 6d - B652006 - teal printing, black number. 8d - C668537 - red ink, black number. 10d - A747801 - black ink, black number. 1/- - A592805 - purple printing, black ink. See Alan Bradley prepared scheduled of fares on SEC Systems. trams, tramways, tickets, secv, bendigo

Bendigo North Primary School Children's Ball held at the White Hills Technical School on Thursday 18th August 1983. Front page has drawings of clouds,ants, bees, mushrooms, butterflies and caterpillars. On the inside is the names of 16 dances and a representation of subjects. The back page has acknowledgements to people who assisted the ball. They include: Heather and Noel Ridge, Lloyd George, David Tunley, Greg Taska, Di Milich, Merilyn Tatt, Brian and Roger Hillman, Mark Walters, Jim McDonald, Lexie Ottery, Peter Ellis, John Ottery, Jenni Hillman, Fay McCaig, Elaine Price, Ruth Sloan, Lesley Campbell, Joan McColl, Connie Kairns, Janet Holland, Val Lee, Sandra Kaska, Evelyn Bruhn, Marg Gilbee, Ken Miles, Joy Miles, Helen Penna, Ken Gilbee, Marg Gilbee, Jane Pattinson, Jenny Mollison, Coral McClure, Maureen Warren, Robyn Murphy, Olga Chafer, Deanne McNeil, Carol Canfield, Sandra Kaska, Lesley Revert and Neil Ross.entertainment, dance, ball, peter ellis collection, bendigo north primary school children's ball, white hills technical school, peter ellis, bendigo north primary school, heather and noel ridge, lloyd george, david tunley, greg taska, di milich, merilyn tatt, brian and roger hillman, mark walters, jim mcdonald, lexie ottery, john ottery, jenni hillman, fy mccaig, elaine price, ruth sloan, lesley campbell, joan mccoll, connie kairns, janet holland, val lee, sandra kaska, evelyn bruhn, marg gilbee, ken miles, joy miles, helen penna, ken gilbee, marg gilbee, jane pattinson, jenny mollison, coral mcclure, maureen warren, robyn murphy, olga chafer, deanne mcneil, carol canfield, sandra kaska, lesley revert, neil ross

Bendigo Operatic Society ''Oliver'' Capital Theater, view Street Bendigo. Souvenir Programme ot the Society's Twentieth year of Production. For an Eight Night Season Commencing Wednsday, 13th june, 1973. Producer: Max Collis - Musical Director: Gwen Grose - Pianist: Dianna Cohn - Assistant Producer, Wardrobe and Ballet Mistress: Madge Welch - Stage Manager: Malcom Cannon. Cast: Michael Frayne, Mark Edebone as Oliver - Douglas Sayle as Mr. Bumble - Patricia Lyon as Widow Corney (The Matron) - Valerie Griffiths as Old Sally (A Pauper) - Pauline Speedy as A Pauper Woman - Bary Burns as Mr. Soweberry (The Undertaker) - Ann Ball as Mrs. Soweberry (His Wife) - Annette Beckwith as Charlotte (Their Daughter) - Graeme Daws as Noah Claypole (Their Apprentice) - Fred Trewarne as Fagin - Shane Brennan,Bruce Ashman as The Artful Dodger - Kathie Farn as Nancy - Marion Wright as Bet - David Daenke as Bill Sikes - Ray Edebone as Mr. Brownlow - John Beaumont as Dr. Grimwig - Jill James as Mrs. Bedwyn.program, theatre, bendigo operatic society

.A clear glass bottle with eight one centimetre wide vertical groves in most of its length. Painted on the bottle in white is, C.J.GLOVER ,TRADE MARK PROGRESS REGISTERED, which has a coat of arms over it, BENDIGO, BRITISH SYPHON CO, LTD LONDON, REGNO 762. The bottle is 10.5 centimetres diameter at its base and tapers to eight and a half diameter, in the next 20 centimetres, the next eight centimetres tapers to three and a half centimetres the last eight centimetres to two and a half centimetres, the next three centimetres it rounds off to three centimetres. There is a red metal cap on top which is three centimetres diameter for two centimetres then tapers for two centimetres to one and a half centimetres which continues for two and a half centimetres with a slight flair at the top There is a small wooden cap on the top and a four by one centimetre curved wooden handle is attached near the top. On the tapered part of the cap there is metal tube protruding down at a 45-degree angle and is four centimetres long and one centimetre diameter. The bottle has a small amount of liquid in it.bottle, c.j.glover, soda bottle

This is a set of 14 photographs of an All-Staff meeting held by the lake at the Army Survey Regiment, Fortuna, Bendigo on the 24th of April 1994. At this meeting CO LTCOL Duncan Burns announced that under Defence’s Commercial Support Program (CSP), the In-House bid submitted in 1993 by a team led by then CO LTCOL Bob McHenry was successful. The In-House bid proposed the establishment of an organisation based at Fortuna to carry out non-core production with 150 of the 373 Survey Corps positions converted to Defence civilian positions. 110 of the Defence civilian positions would be filled voluntarily by military personnel under Section 81B of the Public Service Act 1992 with the remaining 40 positions filled by Public Service recruitment. Other options offered to Survey Corps personnel were postings to 1st Topographic Survey Squadron in Enoggera, QLD, transfer to another Corps in the Australian Army or discharge from the ADF. The In-House bid also proposed 143 Survey Corps military positions to remain at Fortuna to perform ‘core strategic non-sovereign tasks.’ However, Army subsequently decided to abolish the 143 positions, disband 4th Field Survey Squadron, Adelaide, SA and lastly, the demise of the Royal Australian Survey Corp in June 1996. This period of the Army Survey Regiment’s history is covered in more detail in pages 160 to 162 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4.This is a set of 14 photograph of an All-Staff Meeting held at the Army Survey Regiment, Fortuna, Bendigo on the 24th of April 1994, to announce the success of Army’s Defence’s Commercial Support Program (CSP) In-house Bid. The Black and white photos are on photographic paper and scanned at 300 dpi. They are part of the Army Survey Regiment’s Collection. .1) to .3) - Photo, black & white, 1994. CO LTCOL Duncan Burns briefing Army Survey Regiment personnel and civilians. .4) to .5P - Photo, black & white, 1994. D-SVY COL Simon Lemon briefing Army Survey Regiment personnel and civilians. .6) - Photo, black & white, 1994. L to R: D-SVY COL Simon Lemon, unidentified civilian. .7) - Photo, black & 1994. L to R: SCMA WO1 Alan Hancox, unidentified civilian. .8) - Photo, black & 1994. RSM WO1 Phil Meagher. .9) - Photo, black & 1994. WO2 Rob Bogumil. .10) - Photo, black & 1994. Left Row: all unidentified. Centre Row L to R: unidentified (x2), SGT Jim Ash, CPL Steve Linane, CPL Andrew Quin, SGT Craig Kellet, unidentified. Back row L to R: unidentified (x2), SGT Barry Miller, SSGT Steve Winner, SPR Shane Campbell, SPR Karen McQuaigue, CPL Geoff Webb. .11) - Photo, black & 1994. L to R: CPL Warren ‘Waldo’ Shirley, COL COMDT COL Don Swiney MBE. .12) - Photo, black & 1994. L to R: LT Scott Seefeld, CAPT Bin Fashar Sutiman (Indonesian Army), LT Darren Radford, CAPT Gary Warnest, unidentified US exchange officer. .13) - Photo, black & 1994. L to R: unidentified, SGT Mark Host, LT Anthony Chamberlayne, unidentified (x2), Mr Tony Spurling. .14) - Photo, black & 1994. L to R: unidentified US exchange officer, CAPT Bill Griggs, CAPT Matt Jackson CSM, LT Darren Radford, unidentified, LT Scott Seefeld, SGT Mark Host, LT Gordon Muir, CAPT Gary Warnest, LT Anthony Chamberlayne, unidentified (x2), LT Colin Davidson.No personnel are identified. Annotated with date on folder sleeve.royal australian survey corps, rasvy, army svy regt, army survey regiment, fortuna, asr

Duirs and Warrell (62-64 Liebig Street) was prominent in Warrnambool for many years. The business had the name of Duirs and Warrell for nearly 90 years but the store was first established by William Jamieson in 1857. It was then acquired by J.C.A. Kruger before being taken over by James Duirs in partnership with Warrell. The liquor licence of Duirs an Warrell passed to Dickins Supermarket and the shop closed in 1971.These are important labels as the firm Duirs and Warrell was prominent in Warrnambool for many years .1 White label with three straight sides and a curved top. It has gold and green shadow printed text, a drawing of an Irish harp, two star like decorations and a green border. It is stained in part. The label is adhered to a piece of pink card. .2 Rectangular white label with dark blue text and a decorative border of gold coloured vine leaves. It is adhered to a piece of pink card. .3 Rectangular white label with gold coloured text and decorative border. .4 Rectangular white label with gold coloured text and border with curved corners. .5 Rectangular label with gold coloured text and border with curved corners. .6 (two copies) White label with three straight sides and curved top. The label has gold and dark blue text. There is a coat of arms with a lion and a unicorn and at the base a ribbon bow. It is adhered to a piece of pink card..1 FINE OLD IRISH WHISKY BOTTLED BY DUIRS & WARRELL, WARRNAMBOOL .2 FINEST OLD RUM BOTTLED BY DUIRS & WARRELL,WARRNAMBOOL .3 BOTTLED BY DUIRS & WARRELL, LIEBIG STREET, WARRNAMBOOL .4 Fine OLD PORT BOTTLED BY DUIRS & WARRELL, LIEBIG STREET, WARRNAMBOOL .5 FINEST AUSTRALIAN WINE Frontignac. Bottled by DUIRS & WARRELL Liebig Street, Warrnambool .6 TRADE MARK Finest Old BRANDY BOTTLED BY DUIRS & WARRELL WARRNAMBOOL HONI SOIT QUI MALI PENSE DIEU ET MON DROIT duirs & warrell, spirts and wines, warrnambool

Benzedrine was used medically to enlarge nasal and bronchial passages until it was discontinued and replaced with compounds with weaker psychoactive properties (e.g., ephedrine, levomethamphetamine, and propylhexedrine). An empty, clear glass bottle, with a plastic screw top, that contained 'Benzedrine' tablets . Original box.Bottle Front is damaged : 'BENZEDRINE' / BRAND / TABLETS / 5mg ............... Back : POISON.........under / medical supervision. Box Front & Back : MJ / 50 Tablets / 'BENZEDRINE' BRAND / TABLETS / Each tablet contains / 5mg. (0.077gr.) ............./ Distributed by / MENLEY & JAMES (Col) Ltd. / NORTH SYDNEY N.S.W./For Smith, Kine & French / Laboratories, owners of the / registered Trade Mark. 'Benzedrine' Left Side: POISON / It is dangerous / to take this preparation / except under / medical / supervision. Right Side: IMPORTANT / 'Benzedrine ' Brand / Tablets should not / be confused with / 'Benzedrine' Brand Inhaler. ............pharmacy, medicines, asthma, respiratory disease, benzedrine, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, manufactured glass, bottles, menley & james col. ltd., smith, kine & french laboratories

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons) and produced. In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co. Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" This particular one has "7/14".This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one Imperial pint capacity and is made from "clear" glass. There are other milk bottles that have a "green" tint in them. Around the bottom side of the bottle and blown into the glass "ONE IMPERIAL PINT". Below these markings and stenciled is "KIEWA" (in freehand style and underlined) underneath is "PASTEURISED FULL CREAM MILK" underneath this ,in freehand stiyle is "USE" next to this in block style "KIEWA BUTTER, CREAM, AND ICE CREAM MIX" to the left of this ,and barely readable is stenciled "THIS BOTTLE ALWAYS REMAINS/ THE PROPERTY OF/ NORTH EASTERN DAIRY Co. Ltd". On the base of the bottle is molded a big "2". with a smaller "m". An identification mark of "7" over "14" is within a circled boundary. Below this is moulded "RM - 15". glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

N. J. Tillings Timber Factory was part of the Brougham Street, Light industrial area, Eltham. Brick bulidings includes signage: Wakefield Pr... (printer?) No 17 Building C. This is one of 7 B/W 8x10 inch photos with notes on obverse by Dick Crichton. Accompanying letter from Florence Chrichton 2013 : "Originally sent to Shire of Eltham Engineer, Mr. McDonald. [These photographs were part of their campaign to the Shire of Eltham in 1975] claiming that the zoning regulations were being breached by the occupants of various factories in the nearby light industrial zone [Brougham Street, Eltham] - to the detriment of those living in adjoining residential zones, and that, despite .. earlier objections and complaints, nothing was done about it."1 black and white photograph printed with white borderInscribed on back: "Weekend photograph of factories in Brougham Street surrounded by by residential zone. On weekdays cars surround premises - these have been built approx. two years - where is the landscaping? * Undeveloped light industrial land. Careful planning needed for future. Being on high elevations backs of future buildings will be seen from Main Road Eltham and future Art Centre complex. Also Bolton Street becoming heavily used arterial road. Off street parking facilities most important." . The front of the photo has pen marks indicating points of interest.industrial estate, brougham street, eltham

Cordial came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of Brookes Lemos ltd.Historical: Change of Bottles - shape, glass, stopper, embossing. Bottle collectors. Aesthetic: Display showing embossing and shape Clear glass bottle curved on 1 side with criss cross pattern two thirds of the way up surrounding a clear oval shape with narrower ends top and bottom. The other side is made up of 3 flat 'pieces' each with print in capital letters, heavily embossed. On 1 of these flat sides below the writing is the 'outline picture' of a 'boy' holding a similar bottle. Above these sides the bottle becomes round and tapers with vertical embossing to a double lip, a neck and then another double lip with a screw for the top.Printed from top to bottom: 1 flat side: 'Regd Design No 9072 Australia No 8449 India / No 689933 Great Britain No / 1926 Union of South Africa / No 57737 U S America No 1921 New Zealand Regd 1925 Canada / Only Contents Sold'. Middle flat side: 'Brookes Lemos Limited / Manufacturers of / Lemos / Registered Trade Mark' Third flat side: 'This Bottle is the Property / Brookes Lemos Limited and / Cannot be Legally Used / By Others For Any Purpose.' Also outline picture of boy Base: 'F380'cordial, drink, bottle, brookes lemos ltd.

Colour photograph - Grade 6,1979."Attached to photograph" Back Row-L to R: Susan Green, Robyn Ison, Kim Lun, Sandra Dennis, Carolyn Ashton, Belinda Kempton, Julie Ignatidis, Grace Esposita, Nicole Gill, ?. Middle Row- L to R: Cheryl Atkins, Greg Berisniak, Garth Kellet, Mark Bomar, Terry Aravanis, Darren De Jersey, Gavin Thorpe, Jim Pumpa. Front Row- L to R: Milio Baltas, Michelle Gordon, Cathy Johnston, Paul Evans, Sandra Slowley, Julie Fawcett, Carl Handreck, Peter(?), Phillip Merisch.

The golf tournament evolved from the P'boro Power Boat Race. The tournament is still a big event on the Peterborough Golf Club calendar. The Cup records the winners of the actual boat race, including the name of the winning boat and the skipper from 1949 to 1962. The winners were: 1949 Won by Albie Affleck Skipper HT Grimwade. 1950 Won by Lady Emma Skipper DC Moore, 1951 Aunt Spee Skipper A W Moore, 1952 JB Skipper J W Bartlam, 1953. Cynic Skipper HT Grimwade, 1954 Tom Thumb Skipper CR Chirnside, 1955 Nipper Skipper PW Coy, 1956 Typhoon Skipper LG Tabart 1957 Lady Nelson skipper DC Moore, 1958 - 1959 The Sea Moore Skipper F Moore, 1960 Cutty Sark Skipper RA Chirnside, 1961 Sweep Skipper S Joyce, 1962 scum skipper WM HolbeachThis honour board is significant because it records the winners over time of the event, but also because it is a link with the original boat race, which was a major fun event over summer in the town.A shield shaped wooden plaque with a metal scroll at the top and metal engraved shield shape in the centre of the board, surrounded by numerous smaller shield shapes, each engraved with the names of the winners and the date. Also a cup with shield shaped plaques around the base to record the winners.Central plaque inscribed thus: THE SCHOMBERG CUP THE OFFICERS OF THE PPBC 1949 Admiral Desmond C. Moore, Captain Wocca Moore Chief Engineer Andy Chirnside Boson John Wiber Chief Petty Officer (Later Mutinously & illegally self appointed Tinny Grimwade Lieutenant Commander) Ships Cat Tom Austin Master at Arms I Barty (Mr. Bartlam) II Brigadier Tinsley III Mark Howard Sub Lieutenant Gitchie Calvert Jnr Boson II Moyle Breton Chief Writer Jonnie Moore peterborough, golf tournament, the schomberg cup, peterborough golf club

This pocket knife is believed to have been used by an employee of the Bacchus family and possibly given to the employee by the Bacchus family. It is therefore an object with a probable linkage to one of the earliest European colonist families in the Bacchus Marsh area.A pocket knife with mother of pearl handle and a silver blade.On the handle on one side there is an engraved decorative design featuring a bird, leaves and flowers. Along the middle of the handle there is a blank cartouche of silver, intended for the name of the owner. On the other side there are two engraved starbursts. On the blade there are five hallmarks, a crown, a lion passant, head of Queen Victoria, letter G and the letters JM. The crown represents Sheffield. The lion passant indicates the knife was made in England, the image of Queen Victoria is a Duty Mark, the letter G indicates that the year of manufacture was 1850. JM indicates one of two manufacturers - JM or Mappin & Son.knives, bacchus family

Many towns/cities presented medallions to their citizens for service during WW1. These medallions were not necessarily presented for military service. The inscription says it was presented to D. Colquhuon for service in World War 1 by residents of of Nth Carrum. The link to Legacy is not known though presumably D Colquhuon was a Legatee.An example that medallions were a means of honouring local citizens for their work during WW1. Many civilians made a huge, unpaid contibution to the war effort. The medallion does not indicate whether or not that the recognition is for military or civil service.Medallion, circular, metal, front gold colour on outer circumference, blue colour on inner circumference, coat of arms inner circumference. Chain, link, gold colour.Front, Duty Nobly Done, Front, Coat of Arms, gold star top centre underlined. Shield outlined in light blue bordered by gold colour, red cross outlined in gold colour highlighted by 4 gold coloured stars. Shield is flanked by a kangaroo and an emu. Gold coloured banner underneath shield, kangaroo and emu.. Rear inscription, "Pres to D. Colquhuon for service in Great War 1914 18. by residents of of Nth Carrum". Three unidentified marks underneath the words "of Nth Carrum" which could be halmarks "?, 15, W".world war one, medallion

Shillinglaw family members that were part of the Salvation Army included Elizabeth who married John Docherty in 1894, Catherine who married Edward Henry Bottle in 1897 and Jane who married William James Sommerville in 1887. Photographer Mark Joseph Allan operated from 318 Smith Street Collingwood from 1887-1901 Edward Henry Bottle previously married Eleanor Unsworth in 1875. They had four children, Edward John (1876), William Embassy (1879), Henry Charles (1881) and Ethel May (1883), all born at Bacchus Marsh. Eleanor (Ellen/Helena) died 1883 at Bacchus Marsh. He married Catherine Shillinglaw in 1897. CABINET 1866-1905 The Cabinet photo was introduced in 1866 in answer to a demand for a larger format photograph which could be mounted for a cabinet or on the wall. They were 4.5 inches by 6.5 inches (11.5 x 16.5 cm), more than twice the size of the cdv. They cost about twice as much as a cdv but eventually displaced them. They were not extensively produced until 1880 and had ceased by 1905. Coloured mounts, especially maroon or green, indicate a date between 1880 and 1890. - Frost, Lenore; Dating Family Photos 1850-1920; Valiant Press Pty. Ltd., Berwick, Victoria 1991marg ball collection, shillinglaw family photo album 2, cabinet photo, 1890, m.j. allan photographers 318 smith st collingwood, 1887-1901, catherine bottle (nee shillinglaw), edward henry bottle, ethel may bottle, salvation army, unknown

Promotional pack created by University of Ballarat, Bachelor of Visual Arts (Graphic Design / Multimedia) third year, graduating students, 2004. "Products of Choice" is how the graduands "collectively believed represented who they are and what they are striving to be." Each of the 24 graduating students designed and produced a suite of 10 badges (240 unique 35mm badges in total), hand assembled on the faculty badge making machine. One of each student's badges was then hand packed into a foam mount within a plastic case. Ie. All 24 students are represented in each limited edition case. Their original corresponding order is outlined on the reverse of the pack. (Note, it is possible badges may have been reordered prior to entering the collection.) Recipients were encouraged to choose and wear the badges. Lecturing staff (third year): Helmut Stenzel, Leigh Whetter, Nic Wai. Students listed: Judd Madden, Bonnie Van De Ven, Andrew Jones, Ben Potter, Arindel Searby, Catherine Martin, Lou Bryan, Zara Costello, Emily French, Agnes Ostrozka, Clare Simons, Daniel Frawley, Angelika Gorna, Elizabeth Walcott, George Bush, Mark Bickerdike, Stacey Dekker, Petreen D'Costa, Nick Oeldrich, Matt Deutscher, Narelle Craven, Sonia James, Alistair Burn, Thomas Jolly.Three cases of a limited edition run of 240 packs, each containing 24 badges. Limited edition pack numbers 217, 221 and 104. Badges printed full colour laserprinted. Pack cover, printed red with edition number hand written in black marker. Back cover in printed black.university of ballarat, federation university, graphic design, multimedia, judd madden, bonnie van de ven, andrew jones, ben potter, arindel searby, catherine martin, lou bryan, zara costello, emily french, agnes ostrozka, clare simons, daniel frawley, angelika gorna, elizabeth walcott, george bush, mark bickerdike, stacey dekker, petreen d'costa, nick oeldrich, matt deutscher, narelle craven, sonia james, alistair burn, thomas jolly., helmut stenzel, leigh whetter, nic wai.

Old Ballarat Pottery was set up by John Gilbert as part of the Old Ballarat Village, opposite Sovereign Hill. Gilbert had lectured at Ballarat College of Advanced Education before establishing the Edinburgh Pottery at Sovereign Hill in 1972 to enable visitors to see traditional trades at work. The Old Ballarat Pottery was a much larger concern, producing wares for sale through department stores and on party plan via Faberware as well as through the village. Early works looked as though they might have been made in the 1850s, with unturned bases, crude marks and dark treacle-like glazes. Peter Pilven, one of Gilbert's students, worked there after graduating from the Ballarat College of Advanced Education, teaching throwing to students like the potter John Ferguson, who was there from 1978-79. Potters were initially employed by Gilbert's company Pontresina Pty Ltd, registered in 1973. (The Old Ballarat Pottery was registered as a company from 1984-1994.) Early works are marked with an impressed long-tailed 'B', or an 'OB' on either side of a mine tower. A printed stamp also features a mine tower surrounded by the text 'Old Ballarat Pottery Made in Australia'. Later work is impressed 'Stoneware Old Ballarat Pottery Australia' with a kangaroo.Hand thrown blue glazed jug.Stamped 'Stoneware Old Ballarat Pottery?old ballarat pottery, australian studio pottery, jug, pontresina, ceramics

Robert MAIR Robert (Bob) Mair (1943- ) Born New Zealand A potter who trained at the Sturt Pottery in Mittagong under Les Blakebrough and later set up a pottery at Clifton Pugh’s Dunmoochin estate at Cottles Bridge near Melbourne. He then worked with John Olsen for two years from 1969-1970, with Mair throwing and Olsen hand-decorating the pots. During the 1970s, Bob Mair worked in goldfield production pottery in Ballarat with Robert Pitman before moving to Clarendon in the Adelaide Hills in South Australia in 1982. In the late 1880s and 1990s Robert Mair is working at Sturt Pottery timeline again in the late 1980s/1990s as a visiting potter under Campbell Hegan. In the early 2000s, he and partner Janie Kerr set up a pottery at Braemar in the Southern Highlands of NSW. They then moved, first to Sutton Forest where they took up a residency at Hillview, the former summer residence of the governors of NSW, then to Wingham in the Mid North Coast region of NSW. Mair’s work may be marked with an impressed ‘RM’, an impressed tricuspid symbol or both. In Clarendon, he continued to use the tricuspud symbol with an impressed ‘Old Clarendon Pottery Adelaide’ stamp. A Ballarat mark has not been identified, but simse this lidded pot was found in Ballarat it could be a cross in a circle?Lidded ceramic container with blue bamboo like design on the outside.australian studio pottery, ceramics, bamboo

Old Ballarat Pottery was set up by John Gilbert as part of the Old Ballarat Village, opposite Sovereign Hill. Gilbert had lectured at Ballarat College of Advanced Education before establishing the Edinburgh Pottery at Sovereign Hill in 1972 to enable visitors to see traditional trades at work. The Old Ballarat Pottery was a much larger concern, producing wares for sale through department stores and on party plan via Faberware as well as through the village. Early works looked as though they might have been made in the 1850s, with unturned bases, crude marks and dark treacle-like glazes. Peter Pilven, one of Gilbert's students, worked there after graduating from the Ballarat College of Advanced Education, teaching throwing to students like the potter John Ferguson, who was there from 1978-79. Potters were initially employed by Gilbert's company Pontresina Pty Ltd, registered in 1973. (The Old Ballarat Pottery was registered as a company from 1984-1994.) Early works are marked with an impressed long-tailed 'B', or an 'OB' on either side of a mine tower. A printed stamp also features a mine tower surrounded by the text 'Old Ballarat Pottery Made in Australia'. Later work is impressed 'Stoneware Old Ballarat Pottery Australia' with a kangaroo.Hand thrown black glazed bottle with lip. Stamped 'Stoneware Old Ballarat Pottery' and impressed with a long tailed B.old ballarat pottery, australian studio pottery, pontresina, bottle

The Gallipoli Star and its ribbon were designed in 1917 by R K Peacock, but official approval from King George V for the proposed campaign medal was withdrawn after the ribbon, but not the medal, had been manufactured, because it was to have been presented only to Australians and New Zealanders, but not British or other Empire soldiers involved in the campaign. Some Anzac veterans are known to have been issued with lengths of ribbon during the war in anticipation of the medal's production. In 1990, Mr Ross Smith, a former Australian Army Warrant Officer and Vietnam veteran, arranged, at his own expense, for dies from the original design to be manufactured, and for A J Parkes & Co Pty Ltd, of Brisbane, to strike 1000 examples of the medal. 200 of these stars were presented to surviving Australian and New Zealand Gallipoli veterans to mark the 75th anniversary of the campaign. The remainder were sold to the public. A further 1000 were later struck for sale to collectors. The design features an eight pointed star, representing the states and territories of Australia (seven points) and New Zealand. The colours of the ribbon are blue, representing the ocean, gold, representing Australian Wattle, silver grey, representing New Zealand fern, and red for the colour of Australian gum blossom and the New Zealand Rata flower.Gallipoli Star is a star shaped medal with raised crown at centre suspended on a coloured ribbon.medal, gallipoli, world war one, wwi

Caption indicates that the Surrey Hills Church of Christ football team was not only A Grade Premiers in 1938, but also Premiers B Grade in 1935 and Runners-up in C Grade in 1934. Identification per caption as follows: Back row L to R: I T Robertson, K Balding, R T Hayes, M Holmyard (Hon Treasurer) Centre row L to R: M Neilson, L Weeks, F Hayes, A C Sneddon (Hon Secretary), J Andrews, K Webster, J McNiesh. Front row L to R: J F H Peers (Vice-President), R Watkins, K Turnley, E Little (Captain), F Neilson (Vice-Captain), M Neilson, R Weeks, W Nankivell (President). The inauguration of the Association took place at a meeting held at Camberwell Methodist School Office on the 19 March 1923. The following churches were represented at this meeting: Auburn Presbyterian, Kew Presbyterian, Hawthorn Presbyterian, Camberwell Methodist, Canterbury Methodist and St Marks Church of England, Burke Road and Holy Trinity Church of England, Surrey Hills. From 1923 to 1992 there were at least 160 clubs / teams that competed through the various grades with many of these combining & /or changing names, as well as those that competed irregularly.Black and white studio photo of the 1938 Surrey Hills Church of Christ football team with the ESPCFA A Grade Premiers flag in the background. The team includes 17 players and 2 club officials, seated at each end of the front row. The premiership cup is on the floor in centre position.Black and white photo measuring L 20.6 cm x H 15.4 cm mounted on its original brown mount with darker brown borders; the original mount is not glued to the standard cream mount card.72.681 in biro in top RH corner; COURTESY: ALAN SNEDDON in biro beneath the printed identification of the team members. On rear of original mount card in Jocelyn hall's writing: "Have 5 extra copies of this ORIGINAL / in our separate (ORIGINAL) COLLECTION" - PARTIALLY UNDERLINED. On back of the loose cream mount card in Jocelyn Hall's writing: "This ORIGINAL at Centre as have / 5 more ORIGINALS (same) in separate / ORIGINAL collection" in black biro; also "Football / dark card (underlined) in pencil.churches, espcfa, surrey hills church of christ, football, football clubs, sporting clubs, i t robertson, k balding, r t hayes, m holmyard, m neilson, l weeks, f hayes, a c sneddon, j andrews, k webster, j mcniesh, j f h peers, r watkins, k turnley, e little, f neilson, r weeks, w nankivell, eastern suburbs protestant churches football association, alan sneddon

For many years Legacy had a "Back to Caulfield Race Day" for Legatees, widows and their families. In 1995 a Legacy 'Lone Pine' was planted. The article in the Answer says: “We were delighted with the many Legacy Widows, Legatees and friends of Legacy who participated in the Commemorative Race Day at Caulfield Sunday 25th August - marking the 75th anniversary of the RAAF. The VATC had a range of displays and activities including a breathtaking parachute demonstration by the Blue Eagles. It was touch and go for a while due to the weather conditions but once the Blue Eagles jumped they all reached their designated target in front of the winning post. Legacy even had a special race named after it: “The Legacy Widows Appeal Handicap”. Our thanks to the VATC for this courtesy. Hope we had a few winners! Vice President, Legatee Brian ‘Lucky’ Luscombe placed a wreath at the legacy ‘Lone Pine’ - a descendant of the Gallipoli ‘Lone Pine’ on behalf of the Legacy Family. The historic tree was presented to Caulfield last year as part of the events to mark the 1995 Australia Remembers year.” The photos show children playing mini golf as well as the Historical Re-enactment Society of Australia with old military equipment and wearing old military uniforms. The racecourse also had a vintage plane on display with military vehicles.Legacy retains a tie with Caulfield racecourse as it was once an army camp and staging post of young men going overseas to war and now it is the site of a lone pine. The annual gathering at Caulfield racecourse was an event that gets the Legacy family together.Colour photo x 18 of an event at Caulfield racecourse in 1996 and an article in The Answer.Printed on back events, wreath laying ceremony, answer

These 10 photographs were most likely taken in the 1990s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. In photos .1P to .2P the technicians are applying a UV-sensitive pigmented dye emulating one of the print colours to a white opaque polyester sheet mounted on a rotating table in a whirler. The coated sheet was dried before placement in a vacuum light frame beneath a stud registered map negative. They were then exposed to a carbon arc lamp. For more photos and details on the process, see item 6059.5P. In photos .3P to .5P the technician is preparing a orthophotomap film positive. Photo .6P is the rear view of the tri-linear film punch. In photos .7P and .8P the technician is operating a heavy-duty guillotine to trim bulk printed map stock. Cartographers normally provided trim marks to specified map dimensions as guidance to the printer. The trimming stage, like all the other printing processes required high levels of accuracy. These guillotines were extremely powerful to cut through bulk quantities of printed maps. For more photos and details on this process, see item 6069.6P. In photo .9P the technician is operating a daylight film contacting frame. In photo .10P LT Ian Stoddart is taking a well-earned break.This is a set of 10 photographs of lithographic technicians undertaking tasks at the Army Survey Regiment, Bendigo c1990s. Photos .1P to .7P and .9P to .11P are on 35mm negative film and scanned at 96 dpi. Photo .8P is printed on photographic paper and scanned at 300 dpi. They are part of the Army Survey Regiment’s Collection. .1) and .2) - Photo, black & white, c1990s, unidentified printer technician and SPR Janet Murray using the map proof whirler. .3) to .5) - Colour, c1990s, Mick ‘Buddha’ Ellis preparing an orthophotomap film positive. .6) - Photo, Colour, c1990s, rear view of tri-linear film punch. .7) & .8) - Photo, Colour, c1990s, unidentified technician operating a heavy-duty guillotine. .9) - Photo, Colour, c1990s, printer technician SPR Shona Hastie operating a daylight film contacting frame. .10) - Photo, Colour, c1990s, LT Ian Stoddart taking a well-earned break. .1P to .10P– no annotationroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho

Jenna Lee dissects and reconstructs colonial 'Indigenous dictionaries' and embeds the works with new cultural meaning. Long obsessed with the duality of the destructive and healing properties that fire can yield, this element has been applied to the paper in the forms of burning and mark-making. In Without Us, Lee uses charcoal to conceal the text on the page, viewing this process as a ritualistic act of reclaiming and honouring Indigenous heritage while challenging the oppressive legacies of colonialism. Lee explains in Art Guide (2022), ‘These books in particular [used to create the proposed works] are Aboriginal language dictionaries—but there’s no such thing as “Aboriginal language”. There are hundreds of languages. The dictionary just presents words, with no reference to where they came from. It was specifically published by collating compendiums from the 1920s, 30s and 40s, with the purpose to give [non-Indigenous] people pleasant sounding Aboriginal words to name children, houses and boats. And yet the first things that were taken from us was our language, children, land and water. And the reason our words were so widely written down was because [white Australians] were trying to eradicate us. They thought we were going extinct. The deeper you get into it, the darker it gets. But the purpose of my work is to take those horrible things and cast them as something beautiful.’Framed artwork

Colour photos of an Anzac Day march with Legatee Ron Austin in a jeep. More photos from the march include Jeff Kennett, Bruce Ruxton, John Brumby, and Peter Costello who appear to be the distinguished guests. It is Anzac Day 1995. The article in The Answer in May 1993 says: The ever-smiling L/ Ron Austin is an inspiration for all. Ron has the distinction of being the youngest surviving Melbourne Legatee to have served in WW1. He joined over 300 Legatees to march as part of the Legacy contingent to mark Legacy's 70th anniversary, and he marched again for a few blocks as he joined members of his wireless unit to catch up with old friends. Ron was just 14 and a half when he joined the R.A.N. in 1917 as a Boy Seaman. He served for 10 years, resumed civilian life, then in 1931 joined the RAAF Telecommunications. WWII kept him busy! In 1949 he became Assistant Air Attache in Washington, D.C. Ron retired from the Service in 1955 as Wing Commander. It comes as no surprise that Ron was awarded an O.B.E. for his tireless devotion to duty and you might sense Ron has been a tireless member of Legacy too." Plus a note in the Answer in 1997 after Ron passed away aged 94.A record of Legatee Austin being one of the last surviving World War 1 veterans and him attending Anzac Day in the 1990s.Colour photo x 3 of an Anzac Day march with WW1 veteran Ron Austin in a jeep.ron austin, jeep, anzac day, march

An adze is an ancient and versatile cutting tool similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. Adzes are used for smoothing or carving wood in hand woodworking, and as a hoe for agriculture and horticulture. Two basic forms of an adze are the hand adze (short hoe) a short handled tool swung with one hand and the foot adze (hoe) a long handled tool capable of powerful swings using both hands, the cutting edge usually striking at foot or shin level. Mathieson & Sons Maker: In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker” In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764.  The firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide.Hand Adze or Cooper's adze No 4 A Mathieson & Sons Glasgowflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, adze mathieson & sons, cooperage tools, woodworking, barrel making, working timber, joiners tools, carpenters tools

An adze is an ancient and versatile cutting tool similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. Adzes are used for smoothing or carving wood in hand woodworking, and as a hoe for agriculture and horticulture. Two basic forms of an adze are the hand adze (short hoe) a short handled tool swung with one hand and the foot adze (hoe) a long handled tool capable of powerful swings using both hands, the cutting edge usually striking at foot or shin level. Mathieson & Sons Maker: In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker” In 1849 the firm of James & William Stewart at 65 Nicholson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicholson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tin men's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river Bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764. The firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide.Coopers Adze steel with wooden handle No 194 A Mathieson & Sons Glasgowflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road

The design of this small disc is from the Australian Colonial period. The cedar wood desk was made in Australian by Foy & Gibson in the 1880s, most probably in the business’s works in Collingwood, Victoria. The heavy brass locks fitted into the desk drawers were made by the famous Hobbs & Co of London, mid-late 19th century. In 1860 the business changed hands but the locks were still branded Hobbs & Co. The desk is branded with the symbol of Victoria’s Public Works Department. There is currently no information on when, where and by whom this desk was used. However, a very similar desk with Hobbs & Co. locks is on site at the Point Hicks Lightstation in Victoria and was formerly used by the Point Hicks head light keeper there. Other light stations also have similar desks from the P.W.D. (see also ‘Desk, Parks Victoria – Point Hicks Lightstation, Victorian Collections’.) HOBBS & CO., LONDON Alfred Charles Hobbs, 1812-1891, was American born. He became an executive salesman in 1840 for renowned lock manufacturer Day & Newell. His technique of exposing the weaknesses of people’s current locks was very successful in generating sales. He represented Day & Newell at London’s Great Exhibition of 1851, competing with other lock makers. Through the Exhibition he became famous for picking the best trusted Bramah and Chubb locks. Hobbs’ fame led him to found his own company in 1851 then register it in 1852 as Hobbs & Co., London. Hobbs was awarded the Telford Medal by the British Institution of Civil Engineers in 1854 for his paper 'On the Principles and Construction of Locks'. In 1855 the very successful company added partners and became Hobbs, Ashley and Co. In 1860, it traded under the name of Hobbs, Hart & Co. and was based in Cheapside London, where the business remained. Hobbs then returned to America, having sold the complete company to John Mathias Hart. He briefly returned to attend the 21st anniversary celebrations of the successful business in 1872. Hobbs kept himself busy in America, inventing and manufacturing firearm ammunition, for which he held several patents. He passed away there in 1891, a month after his 70th birthday. FOY & GIBSON Mark Foy wan an Irish draper who migrated to Bendigo, Victoria in 1858, attracted by the gold rush. He lived and worked in the area, establishing a drapery business. In the 1870s he moved to Melbourne where there were better prospects for expansion. He chose a place in Smith Street, Collingwood, a suburb of Melbourne, and started his business at the rear. In 1883 Foy retired, bringing in William Gibson as a partner, and then transferred his own share of the company to his son Francis Foy. Not long afterwards Francis sold his half share to Gibson, and the business continued under the name of Foy & Gibson. Francis Foy and he and his brother Mark Foy (junior) moved to Sydney. They established a business there in 1885, named after their father, Mark Foy. Gibson added to his business by starting his own manufacturing works from 1887, producing clothing, millinery, furniture, bedding and hardware for his stores. The factories, warehouses and stores complex became one of Victoria’s largest employers. He set up branches of his stores in Perth, Brisbane and Adelaide and two more branches in Melbourne. Foy & Gibson (usually referred to as Foys) became one of Australia’s largest retail department stores. In 1931 Foy’s little house in Collingwood was still part of the entrance to Foy & Gibson Emporium. In 1955 the company was bought out by Cox Brothers. Later on the stores were sold to various businesses such as David Jones, Woolworths and Harris Scarfe. In 1968 Cox Brothers went into receivership, ending almost 100 years of the business known as Foy’s. The former Foy & Gibson Complex is registered by Heritage Council Victoria. “Designed by William Pitt, this magnificent 19th and early 20th century complex of factories, warehouses and showrooms saw the production of a remarkable range of goods for Foy & Gibson, Melbourne’s earliest department store chain”. (Quoted from the Plaque erected by the Collingwood Historical Society 2007) P.W.D. – Public Works Department, Victoria The desk is stamped “P.W.D,” signifying that it is from the Public Works Department in Victoria, which operated from 1855-1987. The department was responsible for, among other things, the design and supply of office furniture and equipment for public buildings and organisations. This desk is significant historically as it originated from Foy & Gibson, a colonial Australian company that had a positive and strong impact on employment, manufacturing and retailing in Melbourne, Victoria and Australia. The significance of Foy & Gibson to Victoria’s and Australia’s history is marked by the Collingwood Complex being registered in both Heritage Victoria Register (H0755, H0897 and H0896) and National Trust Register (B2668). This locks on this desk are significant for their connection with their manufacturer, Hobbs & Co, who invented a lock that surpassed the security of any other locks produced in the mid-19th century. Desk; Australian Colonial cedar desk, honey coloured. Desktop has a wooden border with a rolled edge and a fitted timber centrepiece. The four tapered legs are tulip turned. Two half-width drawers fit side by side and extend the full depth of the desk. The drawers have dovetail joints. Each drawer has two round wooden knob handles, a keyhole and a fitted, heavy brass lever lock. Inscriptions are on the desktop, drawers, desk leg and lock. Made in Australia circa 1880 by Foy & Gibson, lock made by Hobbs & Co, London.Impressed into timber frame of one drawer “FOY & GIBSON” Impressed into lock “HOBBS & CO / LONDON”, “MACHINE MADE”, “LEVER” Impressed along the front edge of the desktop [indecipherable] text. Impressed into the timber of right front leg “P. W. D.” below a ‘crown’ symbol Handwritten in white chalk under a drawer “206” flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, desk, cedar desk, colonial desk, 1880s desk, australian colonial furniture, furniture, office furniture, office equipment, australian made furniture, colonial furniture, colonial hardware, foy & gibson, alfred charles hobbs, hobbs & co london, hobs & co lever lock, cabinetry lock, machine made lever lock, p.w.d., public works department victoria, day & newell, great exhibition of 1851, bramah lock, chubb lock, telford medal 1854, cheapside london, mark foy, mark foy – bendigo draper, smith street collingwood, william gibson, foy & gibson emporium, foy & gibson complex, cox brothers