These two photographs were taken circa 1970s at the Army Survey Regiment, Fortuna, Bendigo. Photo .1P was taken in 1971 when the then Justice John Kerr (later Sir John Kerr AK, GCMG, GCVO, QC) visited the Regiment. At that time, he was the Chairman of the Committee of Enquiry into Service Pay and Conditions. Personnel from Lithographic Squadron had submitted a grievance regarding salaries to the Committee, who during this visit reviewed their technical skills and conducted interviews. This ultimately led to the personnel achieving salary parity with other technical trades in RASvy. Photo .2P was taken after a formal medal presentation at the Army Survey Regiment in c1976. The Defence Force Service Medal was presented to personnel in recognition of 15 years of efficient remunerated service, or the Clasp for 5 years of additional service.This is a set of photographs of Lithographic Squadron Personnel, Justice John Kerr and other RASvy personnel at the Army Survey Regiment, Bendigo c1970s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, 1971, L to R: Jim Mulqueen, Sir John Kerr AK, GCMG, GCVO, QC, LTCOL Bill Howarth .2) - Photo, black & white, c1976, L to R: WO1 Joe Farrington, John Rankine, CPL Ian ‘Lofty’ Turner, SGT Peter Saunders, LTCOL George Ricketts, SGT Ross Hyde, WO1 Ian ‘Ike’ Lever, WO1 Aub Harvey, SGT Jim Mulqueen.1P to .2P – personnel annotated royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, printing

This is a set of four photographs of surveyors and support staff in the field undertaking duties in Dogera, Milne Bay Province and Kerema, Gulf Province of PNG in 1962. The surveyors were employed in the establishment of mapping and geodetic control. In this era surveyors used theodolites to observe horizontal and vertical angles and tellurometers to measure base line distances between survey stations. From 1957 helicopter transport of survey parties revolutionised transport in remote areas.This is a set of four photographs of surveyors and support staff in the field undertaking duties in PNG in 1962. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, colour, 1962. Unloading survey operation stores from a Landing Ship Medium (LSM) at Dogera, Milne Bay Province, PNG. .2) & .3) - Photo, colour, 1962. Hired civilian helicopter Bell 47G-2 helicopters operating at at Dogera, Milne Bay Province, PNG. .4) - Photo, colour, 1962. Survey party at survey station located near Kerema, Gulf Province southern PNG. L to R: Dave Owens, Keith Broadbent, with local villagers in background..1P to .4P annotated on back – personnel names, the year and the location. royal australian survey corps, rasvy, army survey regiment, asr, army svy regt, fortuna, surveying

"It has been decided by the managing body of St. John's Church of England to erect a war memorial to commemorate the thirty brave men of the congregation who have given their lives at the front, and the 98 men whom they expect to welcome home again. The memorial will cost from £250 to £300 to complete in its entirety, and active steps have been taken to raise the amount amongst the members and adherents of the church. ... The sanctuary panels will be placed on each side of the altar, and will become the permanent Honor Roll by having the names of the soldiers and nurses who enlisted from the congregation inscribed thereon.The whole scheme when completed will be a noble monument to the loyalty, response to duty, and self-sacrifice of the members of the church who enlisted, and will in years to come remind the worshippers of the response of the young members of the congregation to the call of our Empire in her great need. (Camperdown Chronicle, 20 March 1919) LocationPhotograph of a timber World War One Honour Board at St John's Anglican Church, Colac. Plaster 'Station of the Cross' on either side of the honour board are by Mattei brothers. st john's colac, colac, world war one, world war one honour board, mattei brothers

Norma Tullo began her dressmaking business in 1956. At the age of 20, she rented a small shop in the Metropole Arcade, initiating a career that included manufacturing, designing and retailing. In 1965, she became the first Australian to be selected by Butterick Company Inclusive to join their pattern making company. The stylish Tullo ‘look’ in the first half of the 1960s was young, colourful, feminine and most importantly had a strong American appeal. The patterns were distributed worldwide except to Russia and Germany. At this time, she had a collection of 300 garments. In the second half of the 1960s, she developed a new design range, influenced by the American 'hippie' style, featuring floor length dresses with long narrow sleeves, high round collars, and ruffles on the hems and at the cuffs. Patterns and colours became brighter to match prevailing tastes. This blouse is one of a number of items donated to the Fashion Collection by Dione McIntyre.The McIntyre Collection of clothing and clothing accessories forms one of the largest single donations to our Fashion & Design collection. It includes clothing and clothing accessories worn by four women in the Cohen and McIntyre families across three generations. The items worn by Melbourne architect, and Kew resident, Dione McIntyre date from the 1960s and 1970s, and include evening wear, day wear, hats and shoes. As Dione McIntyre often accompanied her husband, fellow architect Peter McIntyre, to formal events, there are a number of pieces of evening wear among the items. The McIntyre Collection also includes items worn by women of an earlier generation: by Lilian Cohen, Dione McIntyre's mother, and by her mother-in-law, the wife of the architect Robert McIntyre. At the other end of the chronological spectrum are a number of outfits belonging to, worn and donated by Annie McIntyre. These include outfits created by notable late 20th century Australian and/or international fashion designers. The McIntyre Collection is significant historically and artistically as it includes examples of design that demonstrate changing tastes in fashion over an 80-year period. The collection is also significant in that it includes the work of a large number of Melbourne designers from the 1960s to the 1990s. Pale aqua coloured long sleeved silk blouse with an attached scarf of the same fabric and colour at the neckLabel: TULLO (removed)norma tullo, women's clothing, australian fashion - 1960s, blouses

Norma Tullo began her dressmaking business in 1956. At the age of 20, she rented a small shop in the Metropole Arcade, initiating a career that included manufacturing, designing and retailing. In 1965, she became the first Australian to be selected by Butterick Company Inclusive to join their pattern making company. The stylish Tullo ‘look’ in the first half of the 1960s was young, colourful, feminine and most importantly had a strong American appeal. The patterns were distributed worldwide except to Russia and Germany. At this time, she had a collection of 300 garments. In the second half of the 1960s, she developed a new design range, influenced by the American 'hippie' style, featuring floor length dresses with long narrow sleeves, high round collars, and ruffles on the hems and at the cuffs. Patterns and colours became brighter to match prevailing tastes.The dress was owned, worn and donated to the collection by Dione McIntyre.The McIntyre Collection of clothing and clothing accessories forms one of the largest single donations to our Fashion & Design collection. It includes clothing and clothing accessories worn by four women in the Cohen and McIntyre families across three generations. The items worn by Melbourne architect, and Kew resident, Dione McIntyre date from the 1960s and 1970s, and include evening wear, day wear, hats and shoes. As Dione McIntyre often accompanied her husband, fellow architect Peter McIntyre, to formal events, there are a number of pieces of evening wear among the items. The McIntyre Collection also includes items worn by women of an earlier generation: by Lilian Cohen, Dione McIntyre's mother, and by her mother-in-law, the wife of the architect Robert McIntyre. At the other end of the chronological spectrum are a number of outfits belonging to, worn and donated by Annie McIntyre. These include outfits created by notable late 20th century Australian and/or international fashion designers. The McIntyre Collection is significant historically and artistically as it includes examples of design that demonstrate changing tastes in fashion over an 80-year period. The collection is also significant in that it includes the work of a large number of Melbourne designers from the 1960s to the 1990s. Long sleeved black cotton dress the fabric of which includes a pattern of small beige and cream polka dots. The ends of the sleeves and the base of the dress include ruffled trims of the same fabric. Label: TULLOnorma tullo, australian fashion - 1960s, women's clothing, day wear, mcintyre collection

An album of newspaper clippings and photos compiled to thank Legatee Philip E Potts when he was leaving Melbourne in 1928. L/ Potts was president of Legacy in 1927-28. The album was compiled by Legatee Frank Doolan. The articles included the first annual demonstration being held on 28 March 1928 with 300 junior legatees performing. Legatee Aaron Beattie was in charge with help from Mrs Gillies and Jim Tierney. Also articles about the proposed building of the Shrine of Remembrance and the appeal for funds. One page shows pictures of a social event held on the Burns Philp ship 'Marella'. Another photo of Marella is in the collection. Legatee Potts was manager of the old-established shipping firm Burns, Philip and Co Ltd. He also was president of the Melbourne 'Highland Pipe Band, a councillor of the Melbourne Scots and English Speaking Union, and a member of the Rotary Club. A record of a tribute to a past president and outlines significant events in 1928.Brown cardboard album x 13 pages of newspaper clippings and photos from 1928 held together by brown string.shrine of remembrance, philip e potts, past presidents

Compiled by Gus Weir of the Wellington Tramway Museum, former Wellington tram driver. Comprises some 33 double-sided album sheets for photographs of Melbourne A1 & A2 class trams. Scanned into 3 parts as pdf files. Many photos taken in the City area, Kew Junction, Port Junction, Port Melbourne, Hawthorn Bridge, Mont Albert, Docklands Photos by Gus himself during Melbourne visits. Part 1 - cover - A1 231, 232, 233, 236, 237, 238, 239, 240, 243, 246 Part 2 - A1 246, 248, 255, 256, 257, 258, A2 259. 260, 261, 262, 263, 264, 268, 269, 275, 278, 280, 282, 283, 284, 286 and 287 Part 3 - A2 288, 291, 292, 293, 294, 295, 296, 298, & 300 Yields detailed information about Melbourne trams from 1991 to 2012Set of 33 album sheets generally with four photos within a bound album, with many blanks to allow for further photos. Each photo has a label on the rear, with details of the photograph's location, photographer, and date. An insert label on each page gives the tram number, location, and date.tramways, tramcars, albums, melbourne, yarra trams, m>tram, kew, docklands, cbd, kew junction, port melbourne, port junction, a1 class, a2 class

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping.Brown plastic rectangular hand frame with holes evenly spaced on either long side. Hinged Braille metal guide with space for 2 rows of Braille, each 35 cells long. braille equipment, rnib

This is a set of nine photographs of cartographic typesetting equipment and personnel in Cartographic Squadron at the Army Survey Regiment, Fortuna, Bendigo circa 1968 to 1979. The rooms on the top floor of Fortuna Villa where the photos were taken were formally the nursery and boys bedrooms during the Lansell family’s occupation of the building. The Fotosetter type setting machine replaced the letterpress method of type production in 1956. Its operator entered the text using a type order provided by cartographic draughtsmen/ draughtswomen. The type was output on a film positive, which was contacted onto strip film. The text was cut out by cartographic draughtsmen/ draughtswomen and affixed onto type sheets using bees wax. Cartographic Squadron’s CPL Arty Lane specialised in the operation of the Fotosetter type setting machine for many years, as shown in photos .3P and .4P. For more information on the Fotosetter, see page 71 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. The computer based Editwriter Model 7500 typesetting system was introduced in 1975 as a replacement to the aging Fotosetter. It was operated by a specialised technician, who generated a large variety of map type styles and sizes quickly and reliably, as well as text panels. Output on Copy proof adhesive backed stripping type film replaced messy wax and spray adhesives in 1978. The Editwriter capability supported all RASvy units and its contractor type setting requirements. SGT Jim McDonald operated the Editwriter for a couple of years in the late 1970’s. He is seen in photos .7P and .8P. reading off a type order and entering text into the computer. See item 6181.23P, photo .1P for a reduced scale photo of SGT Jim McDonald undertaking this task. Also see item 6123.12P photos .1P and .2P featuring CPL Paul Richards, who was another technician that operated the Editwriter for several years in the 1980s. The Editwriter was also operated by SSGT Pat Lumsden, as featured in photo .9P taken in 1979. The Monotype Photolettering Machine seen in photos .5P and .6P is understood to be in service for a shorter period, as it was not as productive compared to the Fotosetter and Editwriter. This is a set of nine photographs of cartographic typesetting equipment at the Army Survey Regiment, Fortuna, Bendigo, c1968 to c1979. Black and white photos are on photographic paper and scanned at 300 dpi. .1) - Photo, black & white, c1960s, Fotosetter type setting machine, unidentified technician. .2) - Photo, black & white, c1960s, Fotosetter type setting machine. .3) to .4) - Photo, black & white, c1968, Fotosetter type setting machine, CPL Arty Lane. .5) to .6) - Photo, black & white, c1970s, Monotype Photolettering Machine, unidentified technician. .7) to .8) - Photo, black & white, c1979, Typesetting machine, ‘Editwriter’ Model 7500, SGT Jim McDonald. .9) - Photo, black & white, 1979, Typesetting machine, ‘Editwriter’ Model 7500, SSGT Pat Lumsden.Personnel and equipment are identified in photos .1P to .3P. on a card. A description is provided: ‘Fotosetter: This model was used from 1956 to 1974. Where photograph was taken: Army Survey Regiment. Person in Photograph: Arty Lane. Approx date photograph taken: 1968. Any Misc Information: All type on maps was set on this machine. The operator of the machine (Ex SGT Lane) joined the Army in 1956 and was discharged in 1977. Also with Survey from 1942 to 1946. Information given by: Arty Lane’. Photo .9P is dated 1979 on the back.’royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, carto

This is a set of seven photographs of Army Survey Regiment personnel undertaking live fire SLR rifle qualification training at Wellsford Rifle Range, Bendigo 1985. This was the last of six regimental training objectives outlined in the administrative instruction – Exercise “City Soldier” accompanying these photos. The other objectives were SLR rifle and M30 grenade handling revision, and first aid at Fortuna; and navigation and RATEL at Wellsford Forest. Personnel from Air Survey, Cartographic, Lithographic and Headquarters Squadrons were reallocated to four training platoons for one week from 7th to 11th October 1985. Rifle shooting at Wellsford Rifle Range occurred for two days at the end of the week.This is a set of seven photographs of the Army Survey Regiment undertaking live fire rifle qualification training at Wellsford Rifle Range, Bendigo, 1985. Black & white photos .1P to .5P are printed on photographic paper and scanned at 300 dpi. Photos .6P to .7P are on 35mm negative film and scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, black & white, 1985, unidentified personnel. .2) - Photo, black & white, 1985, unidentified personnel. .3) - Photo, black & white, 1985, unidentified personnel. .4) - Photo, black & white, 1985, MAJ Terry Edward. .5) - Photo, black & white, 1985, unidentified US Army Exchange officer. .6) & .7) - Photo, black & white, 1985, unidentified rifle range safety officer..1P to .7P – No personnel are identifiedroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr

This is a set of four photographs of Bell 47G-2 helicopters used in Royal Australian Survey Corps Field Operations. c1965. From 1957, helicopter transport of survey parties revolutionised transport in remote areas. The most common helicopter used by the Royal Australian Survey Corps at this time was the civilian Bell 47G-2 and the Sioux, the Australian Army’s’s equivalent. equivalent. From 1964 an Aerodist MRC2 airborne Electronic Distance Measuring (EDM) system was extensively used for topographic surveys over long distances by trilateration to replace traverse requiring survey station intervisibility. In 1965 the command field survey unit personnel attached to the Army Survey Regiment’s Topographic Squadron were used mainly in support roles such as station clearing, tower operations, station monumenting, Aerodist computations, forward base operations, geodetic observations on the north-south traverse and logistic support for Remote teams. .1P is a photo of a civilian Bell 47G-2 helicopter Registration / Serial VH-UTB owned by Helicopter Utilities from Mascot, NSW c1965. In the background of this photograph is three personnel and vehicles at a field survey camp. The left-hand vehicle is a Willys Jeep with trailer and on the right is probably a Truck, 2 1/2 ton, 6x6, General Service GMC. The Bell 47G-2: VH-UTB was destroyed, and its pilot killed in tragic circumstances during a civilian survey operation on Cape York Peninsula in June 1966. .2P is a photo of a a civilian Bell 47G-2 helicopter Registration / Serial VH-IHB taken in Wyndham, WA. As the letters ‘TAA’ appear on the fuselage, the helicopter was charted from Trans Australian Airways. .3P is a photo of a Bell 47G-2: VH-UTC with survey camp in background. .4P is a photo of a Bell 47G-2 equipped with floats and unidentified personnel loading stores, possibly in Darwin. Acknowledgement: Royal Australian Survey Corps – Aerodist Years 1964-1975 Version 2021.0 Authored by Peter Jensen.This is a set of four photographs of civilian Bell 47G-2 helicopters used in Royal Australian Survey Corps Field Operations. c1965. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1965, Bell 47G-2 helicopter: VH-UTB with survey camp in background. .2) - Photo, black & white, c1965, Bell 47G-2 helicopter: VH-IHB with survey station in foreground. .3) - Photo, black & white, c1965, Bell 47G-2 helicopter: VH-UTC with survey camp in background. .4) - Photo, black & white, c1965, Bell 47G-2 helicopter: Unidentified personnel loading stores possibly in Darwin..2P – annotated on bottom of photo ‘Wyndham Area – Helicopter drops observing party’ The other photographs are not annotated.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying

This is a set of five photographs of vehicles used by field survey parties. c1950s. The first two photos show unidentified surveyors and field survey vehicles departing the Army Survey Regiment’s transport compound. The third photo of LTCOL Lindsay Lockwood and CAPT Jim Stedman was taken at a field survey camp at Camooweal, QLD. LTCOL Lindsay Lockwood was the CO of the Army Survey Regiment from 1951 to 1962. As the longest serving commanding officer of the unit, there was many changes implemented. LTCOL Lindsay Lockwood’s period as CO is covered in more detail in pages 48-49 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. CAPT Jim Stedman later reached the rank of Colonel, was Director of Military Survey from 1975 to 1978 and was appointed as Colonel Commandant (honorary appointment, Retd) of the Royal Australian Survey Corps from 1978 to 1983. The truck and semi-trailer loaded on a flatbed Photo .4P was probably towing RA Svy’s field deployable printing press, the MANN Double Crown. See pages 44 -45 of Valerie Lovejoy’s book for more information on how this trailer mounted printing press was used in a recruitment drive in 1948.This is a set of five photographs of vehicles used by field survey parties. c1950s – 1960s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1950s, unidentified surveyors in a field survey vehicle departing the Army Survey Regiment’s transport compound. .2) - Photo, black & white, c1950s, unidentified surveyors in a Humber 1 ton survey vehicle departing the Army Survey Regiment’s transport compound. .3) - Photo, black & white, 1958, L to R: LTCOL Lindsay Lockwood and CAPT Jim Stedman at Camooweal, QLD., .4) - Photo, black & white, c1950s, unidentified surveyor, field survey truck and trailer. .5) – Photo black & white, c1950s. Unidentified surveyor undertaking vehicle recovery..3P on back – Lindsay Lockwood (LT COL) Jim Stedman (Capt) 1958 Camooweal .4P on back – Early vehicles for field trips. .5P with card strip annotation’ Survey field parties often strike difficult terrain when driving’.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying

These six photographs of Printer Technicians using a heavy-duty guillotine to trim bulk printed map stock were probably taken circa 1960s to 1980s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. Personnel are not identified on Photos .3P and .4P, however names are annotated on photos .1P, .2P, .4P and .5P. Cartographers normally provided trim marks to specified map dimensions as guidance to the printer. The trimming stage, like all the other printing processes required high levels of accuracy. These guillotines were extremely powerful to cut through bulk quantities of printed maps, as evident in photos .1P .3P, .4P and .6P.This is a set of photographs of Printer Technicians using a heavy-duty guillotine to trim bulk printed map stock c1960s to 1980s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1960s, L to R: ‘Wanger’ Payne, unidentified, Lithographic Squadron .2) - Photo, black & white, c1980s, CPL Ken Cavanagh, Lithographic Squadron .3) - Photo, black & white, c1970s, unidentified, Lithographic Squadron .4) - Photo, colour, c1970s, Peter Saunders, Lithographic Squadron .5) - Photo, black & white, c1980s, L to R: unidentified, WO1 Noel ‘Nesty’ Coulthard, Lithographic Squadron .6) - Photo, black & white, c1980s, unidentified, Lithographic Squadron.1P, .2P, .4P and .5P. personnel annotation on back. * unidentified on .1P due to poor writing. .3P and .6P – no annotationroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho, printing

This is a set of eight photographs of Army Survey Regiment personnel undertaking regimental training in the Wellsford Forest, Bendigo, c1986. The aim of the training was to provide personnel a practical knowledge of infantry and minor tactics at the section level, navigation and map reading, RATEL and Survival in the Field. According to administrative instructions accompanying these photos, Air Survey, Cartographic, Lithographic and Headquarters Squadrons trained separately for one week from April to June 1986. Annotations on the back of photos .1P to .8P indicate Headquarters Squadron’s 4 Section in the ‘Axedale’ Forest. *Note - The forest was incorrectly named – It was most likely the training was in the Wellsford Forest. Sections were established for the period of regimental training only. This is a set of eight photographs of the Army Survey Regiment undertaking regimental training in the Wellsford Forest, Bendigo. c1986. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1986, SGT Bruce Wetzig. .2) - Photo, black & white, c1986, PTE Tony Seely. .3) - Photo, black & white, c1986, SGT Bill Claydon. .4) - Photo, black & white, c1986, SGT Bill Claydon. .5) - Photo, black & white, c1986, SGT Gregory Smith. .6) - Photo, black & white, c1986, unidentified personnel. .7) - Photo, black & white, c1986, unidentified personnel. .8) - Photo, black & white, c1986, Mack water tanker..1P to .5P – Personnel are identified .6 to .8P – No personnel are identified Annotated ‘4 Section, Headquarters Squadron Axedale Forest’royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr

Pittock collection: three wood spokeshaves, metal construction * one straight spokeshave, marked 64, 230 mm L x 40 mm W * one rounded spokeshave, marked B, 250 mm L x 60 mm W * one specialised marking/shaping tool, wide guide, marked Stanley No. 66 Pat'd Feb 9.86, 300 mm L x 50 mm W x 55 mm D * variety of shaping tool blades for Stanley tool, 60 mm x 15 mm blades. Stored in Havelock Flake Cut Pure Virginia Tobacco tin, 80 mm L x 55 mm W x 15 mm D Items stored in Pittock coach builder's box, reference 13000.1.

McColl Rankin & Stanistreet, North Virginia Gold Mining Co NL, State Accident Insurance Office, Mines Policy. a/ Mines Policy No. M. 41883. Estimated amount of wages 265 pounds, Premium, 10 pounds 9 pence. Mining at Fry Street Sailor's Gully, Eaglehawk. Dated 1/11/1939. b/ Mines Policy No. M. 42487. Estimated amount of wages 468 pounds, Premium, 18 pounds 4 shillings. Gold Mining at Eaglehawk. Dated 21/2/1940. c/ Mines Policy No. M. 51808. Estimated amount of wages 300 pounds, Premium, 15 pounds 2 shillings 6 pence. Gold Mining at Fry Street, Eaglehawk. Dated 18/3/1947. Inscriptions/Markings: McColl Rankin & Stanistreet Stamporganization, business, gold mine, mccoll rankin & stanistreet, north virginia gold mining co nl, state accident insurance office, mines policy mining at fry street sailor's gully, eaglehawk

This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.DEPARTMENT OF PUBLIC WORKS, N.S.W. RIVER MURRAY WATERS SCHEME. HUME RESERVOIR. 28. Concrete Pillar for Tail Tower. This shows the back and upstream side of the tower. The groove at the back is left for the reception of the concrete core wall of the earth embankment. The groove is being used at present as a hoist well, up and down which men and materials are conveyed in connection with the re-erection of the Tail Tower of the cableway. The pillar is 108 feet from the ground and is within 4 feet of its ultimate height. The foundation of this part at its deepest is 90 feet below the natural surface so that when the 80 feet tower and jury mast are in place the total height from foundation to top of mast will be about 300 feet. New South Wales, August 1927.hume reservoir australia, river murray waters scheme, hume reservoir construction

Legal document within a light brown manila document - titled "Coburg Tramway Employees Band / Re Loan to the Band of sum of L300" 300 Pounds, Contains: 1 - Memo dated 20/6/1919 listing the instruments and that they were in good order along with the serial numbers. Signed by the Stores Clerk - F. Wraith. 2 - List of instruments purchased with the loan, Serial numbers and Manufacturer. Signed by F. Wraith as Treasurer, F. Keane? as Secretary and W. F. Allen as Bandmaster. 3. Agreement typed, dated 6/7/1918 between the MBCTT and the Coburg Electric Tramways Band, to be repaid at 50 pounds per annum. Signed and sealed by each of the 20 members. Folder has file number "14" written on the outside.trams, tramways, mbctt, bands, music

These five photographs were taken at a formal Army Survey Regiment medal presentation at the lakeside of Fortuna on the 11th of December 1992. The CO of the Army Survey Regiment – LTCOL Bob McHenry presented the Defence Force Service Medal to five RA Svy personnel in recognition of 15 years of efficient remunerated service. They were SSGT Greg Byers, SGT Peter Hardy, SGT Garry Kerr, SGT Laurie Justin and WO2 Rhys De Laine. LTCOL Bob McHenry was the CO of the Army Survey Regiment from 1992 to 1993.These five black & white photographs were taken at a Defence Force Service Medal Presentation on the 11th of December 1992 at the Army Survey Regiment, Bendigo. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) Photo, black & white, L to R: SSGT Greg Byers and LTCOL Bob McHenry. .2) Photo, black & white, L to R: SGT Peter Hardy and LTCOL Bob McHenry. .3) Photo, black & white, L to R: SGT Garry Kerr and LTCOL Bob McHenry. .4) Photo, black & white, L to R: SGT Laurie Justin and LTCOL Bob McHenry. .5) Photo, black & white, L to R: WO2 Rhys De Laine and LTCOL Bob McHenry..1 to. 5P – annotations identifying personnel and the date provided on paper.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr

This is a photograph of Army’s Inter-Service Softball Team that competed in the 3rd Military District, Victoria against Navy and Air Force taken on the 26th of February 1981. The competition was held from the 23rd to the 27th of February 1981. A note on the back of the photo indicated Army’s team came second. It is not known who the winning team was and where the competition was held.This is a photograph of Army’s Team that competed in the 3rd Military District Inter-Service Softball competition against Navy and Air Force, taken in an unknown location in Victoria on the 26th of February 1981. The black and white photo is on photographic paper and was scanned at 300 dpi. It is part of the Army Survey Regiment’s Collection. .1) - Photo, black and white, 1981. Back row L to R: PTE Karen Ball – DSU Broadmeadows, CPL Kay Melton – DSU Puckapunyal, SPR Scheryl Delforce – Army Survey Regiment Bendigo, WO2 Dizzy Dowsett – CARO, LT Jan McFarlane. Front row L to R: SPR Sharon Jones – Army Survey Regiment Bendigo, CPL Donna Sheldrick, CPL Di Chalmers – Army Survey Regiment Bendigo, PTE Karen ???, PTE Jackie Hubbard.Personnel and dates are identified on the back of the photo as well as on paper. royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr

The Adlake Non Sweating Lamp "THE ADLAKE NON SWEATING LAMP CHICAGO" Adlake is a shortened name of the "Adams and Westlake" company. They began doing business in 1857 in Chicago. They manufactured railroad supplies and hardware in Chicago. In 1927, they moved to Elkhart, Indiana, where they remain in business today. The difference between "lamp" and "lantern" is that the lamp is meant to be hung on a post or a hook during use and the lantern is hand-held and only used when a person is directing traffic. It has four lenses- two amber and two blue. Adams & Westlake, also known as A&W or Adlake, became a dominant maker of short-globe lanterns and their #200, #250, and plain “Kero” (sometimes known as #300 or #400) models were sold by the thousands to the entire range of railroads. Short-globe lanterns came about because manufacturers figured out how to get a lantern to burn properly with a shorter combustion chamber, which allowed lanterns to be shorter and cheaper. Adams & Westlake began selling #200 Kero lanterns around 1921 and they sold well, the #250 Kero lantern was released in the mid 1920’s as an improvement over the #200 version, with a new burner design. FInally, around 1930 Adams & Westlake released models marked simply “Kero” but are sometimes known as the #300 or #400 models, which are further refinements. The #200, #250, and “Kero” models all look very similar in design and in fact they are all pretty much the same frame design with a couple of minor differences on the later “Kero” models. Short globe lanterns are still very easy to find because they were produced well into the mid 1900s. Adams & Westlake short globe lanterns can usually be dated by looking for a two-part date code on the bottom of the lantern. The first digit will be 1,2,3, or 4 followed by a dash and then a two digit number. Sample code: 2-39 would mean that the lantern was produced in the 2nd quarter (Apr-Jun) of 193Historic - Railways - Adlake Non Sweating LampAdlake Non Sweating Lamp made of metal and glass Metal with handle, painted black, oil Bullseye lens, 13 cm diameter, green Circular lens on opposite site, 5 cm diameter, clear Sliding panel provides access to burner Rain shield embossed 'THE ADLAKE NON SWEATING LAMP' 'LAMP MFG 7 RLY SUPPLIES LONDON''THE ADLAKE NON SWEATING LAMP' 'LAMP MFG 7 RLY SUPPLIES LONDON'puffing billy, adlake non sweating lamp

This map was printed in 1925 and contains the Warrnambool Harbour alterations proposed by the Warrnambool Harbour Committee incorporating the original designs of Captain Menzies, the Warrnambool Harbour Master and the City Engineer, Mr A. Lavercombe. The main features of the proposal were the extension of the Eastern Wall to almost enclose the harbour and a basin in Lake Pertobe. The design was to be placed before the Victorian Royal Commission on the Outer Ports which was established partly to examine the allegations of unsatisfactory work carried out in Warrnambool when the Breakwater was extended 300 feet in 1914 and also to make recommendations regarding all regional ports. The Warrnambool Breakwater was completed in 1890 but failed to provide the shipping conditions needed to continue Warrnambool as a viable port. Many plans and proposals for port improvement such as this one were produced in the late 19th century and the first half of the 20th century with the port officially closed in the 1940s. Still today the Breakwater and Warrnambool Harbour conditions remain a source of contention.This map is significant as it shows a 1925 design for Warrnambool Harbour hitherto little-known. It also has markings showing land sites of the time (BayView Hotel, Woollen Mill etc.)This is a map made of thick yellow paper pasted onto a cloth backing. It has two cloth tags at the top for tying up the map when folded. It appears to be a hand-drawn map copied with printed material added. The map is shaded green and red in some areas. Attached by nails to the map are wooden frames, rounded at the bottom and partly curved at the top. The map is torn and partly detached at the top. The top frame has a cord attached for hanging the map.warrnambool harbour, captain menzies, a.lavercombe city engineer, warrnambool breakwater, royal commission on outer ports

Churchill Island has a significant photograph collection dating from the nineteenth century. Moonah trees can be seen growing in various spots around Churchill Island. They are a type of Melaleuca and can live for up to 300 to 400 years. Moonah trees were of special significance to the Bunurong people, the local aboriginal tribe, who called Churchill Island Moonar'mia. The Bunurong people also have a special legend which relates to the Moonah Tree. The legend is that there was a boy and girl who had fallen in love and wished to spend each moment in each other’s embrace, this resulted in them neglecting their family duties. The lovers still continued to disappear to be alone, so the tribal elders banished them from their village. The moonah tree trunks are the reminder of the lovers in their tightly entwined embrace twisting around each other. A statue representing this legend can be seen at the entrance to the Churchill Island Visitor Centre.Black and white photograph of group of moonah trees by the shoreline.Catalogue number written in pencil on reverse. On reverse in pencil 'FROM ALBUM 10, page 59'churchill island, moonah, tree, melaleuca

Since 1988 Legacy has held a public speaking contest called the Junior Plain English Speaking Award. Schools were eligible to send along representatives to compete. The following was taken from a programme in 1996: "The Award aim is to promote enhanced oral communication skills for 12-14 year old students and to help young people appreciate the ideals of Legacy - voluntary service, caring and comradeship - and the need for remembrance. It began in 1988 in the Melbourne area with the support of the Ministry of Education and The Plain English Foundation. Entries have grown from 24 in the 1988 competition to over 300 in schools across the State, plus greater numbers participating in the process of selecting four contestants from each school. In 1995, a successful Interstate Championship was held with contestants from Victoria, New South Wales and Queensland. On 11 November 1996 the first National final was held with contestants from six states."A record of a Junior Plain Speaking contest that was run by Legacy from 1988 to the present day.Re-recordable video tape. Black plastic outer case with paper insert.Handwritten lable on video tape ‘Youth Speak Out - Legacy Vic State Finals. Produced by Optus Vision Channel 55 Additional yellow post-in note ‘LJPSH Winners, where are they now? ( longer than 5 mins?)’speaking contest, legacy promotion

In November 1932, Frank Packer and Ted Theodore purchased the World, a struggling afternoon newspaper owned and operated by the Australian Workers' Union in Sydney, and re-branded it as the Star. Approached by Sir Hugh Denison, who enjoyed a monopoly over the Sydney newspaper market, they were offered 86,500 Pounds to close the paper if they agreed not to publish a morning, evening or Sunday newspaper within a 300-mile radius of the city for three years. Packer and Theodore accepted the offer, the the Weekly was a way of skirting the embargo, it would be a women's newspaper, and it would be self-sufficient. George Warnecke envisioned the Weekly as a publication with an Australian outlook, appealing to all sections of society, and offering an element of news in every article, whether it concern fashion, cookery, or parenting. When the first issue appeared in Sydney on June 10, 1933, it was printed in black-and-white newspaper format and priced at twopence per copy, "the biggest value in the world". It had sold out by lunchtime. 4 x Australian Women's Weekly magazines. Dated:- 1. December 4, 1943; 2. July 29, 1944; 3. August 5, 1944; and 4. September 2, 1944. All were priced at 4d.magazines

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. In this example, the Rules of Membership for the Victorian Braille Writers were attached to the board.1 wooden back board with metal hand frame and stylus156 carved into wooden framebraille equipment, victorian association of braille writers

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! Various metal hand frames accompanied by a metal stylus with wooden handle. Some include a wooden slate, which was used to make the system portable as a firm base was needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. Transcribing maths was an extremely complex task and a metal grid was utilised to reproduce graphs and diagrams.1 wooden hand frame with metal grid and metal and wooden stylus, 1 metal maths grid with metal pegs in metal container inside a brown suitcase and numerous sheets of Braille paperT.C. Coughlin 5 doz sausage rolls Wilmington Southend is written inside the lid of the suitcasebraille equipment, james murphy

Momument to commemorate the Centenary of the Stawell Water Supply as designed by Mr. John D'AltonTown of Stawell Erreceted to Commemorate the the Centenary of Stawell's Water Supply System. As Designed by John D'Alton, his sceme included the diversion of Water from Fyan's Creek in the Grampians to Stawell a distance of 35 km. And involved the costruction of Timber Fluming Mountain Tunnel 300 mm Pipeline 100 years later the principle of the scheme remains the same. Work Commenced Feburary 1875 and was completed December 1881. Unveiled by The Hon. F.J. Cranter M.L.C. Minister for Water Supply On Novemebr 15th 1975 Cr. M.K. Hallam J.P. Mayordoctor's hill, hospital