Showing 899 items
matching blacksmith,
-
St Kilda Historical Society
Photograph, Harry Hawker plaque, St Kilda home - images collection
Harry George Hawker was born on 22 January 1889 at South Brighton, Melbourne. He was the son of George Hawker, blacksmith, and Mary Ann Hawker, née Anderson, both Victorian-born. He attended schools at Moorabbin, East Malvern, St Kilda and Prahran. In 1901, he left school at the age of 12 and became a trainee mechanic at the Melbourne branch of Hall & Warden bicycle depot. In 1905 he joined the Tarrant Motor and Engineering Co. as a qualified mechanic and, in about 1907 he set up his own workshop at Caramut, western Victoria. In 1911 he left for England with the intention of becoming an aviator. In June 1912, he was employed by Sopwith Aviation Co. Ltd and worked on the Sopwith-Wright biplane. He enrolled in a flying school where he was personally taught by Sir Thomas Sopwith, and obtained his licence a few months later. He went on to become a test pilot, a renowned aviator who won many competitions, and a designer who improved aircraft safety and performance. He was killed while flying a French Goshawk on a trial run near Hendon, England, on 12 July 1921. Colour photograph unmountedOn the plaque: Harry Hawker 1889-1921 Aviator & Aircraft Designer lived here 1900-1911. Plaque unveiled for City of St Kilda by Weston Bate 12 February 1989st kilda, plaques, harry hawker, hg hawker, gourlay street -
Merbein District Historical Society
Certificate - Proficiency Certificate
Proficiency certificate A4 certificate No 107909Front education department Victoria logo in oval with coat of arms and crown Proficiency certificate NO 107909 This is to certify that Penelope Treadwell has successfully completed the first three years of a course prescribed for post primary schools at a school approved for the purpose director of education Back the candidate has completed a course of study in the following subjects with results as indicated English pass, algebra pass, geometry pass, geography pass, general science pass agricultural science, French credit pass , German, Latin, history pass, social studies , musical appreciation, art credit pass, shorthand, home management including cookery, needle work credit pass, crafts, woodwork, metalwork, blacksmithing, mechanical drawing, physical education pass. education, penelope treadwell, proficiency certificate -
Bendigo Historical Society Inc.
Document - NORTH DEBORAH GOLD MINING CO N. L. - MINERS' WAGES AT THE DEBORAH MINES, 1953
Carbon copy notes, which have been cut in half, listing Miners' Wages at the Deborah Mines, 1953. Wages are for a 5 day, 40 hour week and in present day currency. Miners received $27.20 or $35.25 if a Leader in a wet shaft. Braceman $25.80, Platman $25.80 or $27.05 if he worked in a wet shaft. A Mining Blacksmith $28.55, a Fireman, from $26.10 to $26.60, Winding Engine Driver $30.05 a week. Batteryman $25.10, battery Feeder $24.80. Engine Driver's wages varied from $27.10 to $28.90 if in charge of a dynamo and plant. The Basic Wage was then $23.20 a week. In 1895, employees worked a 6 day, 48 hour week and most men received less than $5 per week. The price of gold in 1949 was $30.98 compared with an average of $8.00 an ounce in 1895. When the Deborah group of mines closed in 1954 the price of gold was $31.25 an ounce. Signed by A Richardson 20/8/1971. Written in the margin: Copy, Compiled for Jim Sullivan 20/8/1971.document, gold, north deborah gold mining co n. l., north deborah gold mining co n. l., miners' wages at the deborah mines 1953, miners' wages, price of gold, jim sullivan -
Bendigo Historical Society Inc.
Document - COSTERFIELD: A HISTORY FROM 1853 TO 1978
''COSTERFIELD: A HISTORY FROM 1853 TO 1978'' - PAPER BY JOHN BRADLEY A Paper for History Dip II (where?). 22 handwritten pages with additional pages of photographs. Includes mining history of North Costerfield and South Costerfield Mines; information on Coster family and Field family; coach services to Costerfield; Post Office services; schools in Costerfield; churches at Costerfield; (Indian) hawkers; shops and hotels; boarding houses; blacksmiths; Police in Costerfield; Scheelite mine; Sport; Costerfield Band; Public halls; Cemetery; farmers of the area. Page of acknowledgements; Bibliography; Reproduction (poor) of photographs of early photograph of Costerfield (1890); miners at 'Big Antimony Mine , 1912'; Bombay Mine; various buildings; football club membership 'tickets'; auction advertisement - mining plant, 1902; sale of mining equipment 1941; engine room at the Costerfield Mine 1939; race between motorbike and horse and jinker; school photo - various years 1910-1914; football teams; sketches of public hall and Brown's Mine Tavern (and Billiard Rooms).John Bradleygold, goldfields, costerfield, costerfield mines, coster family, field family, post office, cemetery, football, boarding houses, blacksmith, hotels and shops. brown's mine tavern, big antimony mine. -
Southern Sherbrooke Historical Society Inc.
Information folder - DeCoite family
Information folder containing items pertaining to the DeCoite family. Contents:- A3 photocopy of calendar with historical photos of DeCoites' blacksmith & iron works, Ferntree Gully. Order of service for John DeCoite's funeral service, Boyd Chapel, The Necropolis, Springvale, 26th April 2005. Card, from DeCoite family to Peter & Susan Downard, thanking them for their kindness re. John's death. Copy of speech delivered by Susan Heywood-Downard at the opening of the Society's launch of "Playing To Win" (Commonwealth Games exhibition), 2 Dec 2005 Photo, Betty de Coite, running Photo, John de Coite Jr, wedding Photos, various de Coite family photos. Photo, school group, inc. Betty de Coite. Telegram, dated 1947, congratulating Betty de Coite on a win, Article, "Farewell to an Anzac", Ferntree Gully Belgrave Mail, 29th April 2008. Order of service, funeral of Betty de Coite, 2015 (water damaged).decoites blacksmiths, jack decoite, bob decoite, john decoite, sir george knox, gus powell, moss trooper -
Bendigo Historical Society Inc.
Booklet - Albert Richardson Collection: Fortuna Hustler's Mine Wages Book August 1906 - January 1907
Albert Richardson's father was G. Richardson, the Engine Driver at the Fortuna Hustler's Mine. Maroon hard cover booklet. On front cover on affixed paper: 'Wages earned at Fortuna Hustler's Mine, Aug 1906 - Jan 1907'. Inside front cover: George A.G. Richardson, off Revere St.' and 'started to work at Fortuna Hustlers Feb 25th 1899 sh 1907'. Child's pencil drawing of a man on front page. Long Gully Bendigo written in pencil across front page. Royal Historical Society of Victoria, Bendigo Branch, stamp. Example: first entries in Time Book for 9/06 (August 1906) is L. Phillips, Manager, no hourly rate given; G. Richardson, Engine Driver, 8/4d per day; T. Coates Engine Driver, 8/4d; H. (?) Kelly, Engine Driver 8/4d; T. Berryman, blacksmith 10/-. Names of miners, occupation, days worked, total number of days worked, rate per day and total amount paid are listed in the Time Book. George A. Richardson, off Revere St.fortuna hustler's mine, gold mining, bendigo goldfield, a. richardson, engine driver, wages book, wage rates, 1906, 1907 -
Flagstaff Hill Maritime Museum and Village
Domestic object - Flat Iron, circa 1900
Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top. An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Iron; small flat domestic iron.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, iron, flat iron, domestic iron, laundery, ironing equipment, sad iron -
Eltham District Historical Society Inc
Document, Conveyance of Lot 20 Henry Street, Little Eltham North to Trustees of Wesleyan Chapel, 1856
Originally purchased in 1856 from Thomas Roberts, Yeoman of Little Eltham, for £10 for use by the Wesleyan Chapel, represented by indentured Trustees, Rev. Barnabas Shaw Walker, Minister of the Pentridge Circuit, Francis Thomas, Farmer of Keelbundora, William Harriman, Blacksmith of Nillumbik, Nicholas Rodda, Farmer of Nillumbik, Aaron Grimshaw, Farmer of Greensborough, Joseph Cooper, Gardener of Keelbundora, Peter Dredge, Scholmaster of Jika Jika and Samuel Jeffrey, Farmer of Jika Jika. Lot 20 of Subdivision of Portion 13, Section 4 of the Parish of Nillumbik in the County of Evelyn was located on the southern side of Henry street in Little Eltham North, where the current Our Lady Help of Christians Catholic Church is situated. It became the location of the Eltham Rechabite Hall. In 1893 a new hall was built and further enlarged in 1919. At the commencement of 1922, the property was purchased from the Independent Order of Rechabites with publicly subscribed funds and a new hall built at a cost of £750 and improved road access constructed to reduce the grade, running from Dudley Street to Henry Street. This hall was eventually replaced with the new Shire Offices and Hall built on the corner of Arthur Street and Main Road, which was opened in 1941. Traces the earliest history of the Eltham Public Hall in Henry Street and the various names, occupations and abodes of the Trustees associated with the propertyaaron grimshaw, blacksmith, edmond perry, eltham public hall, eltham rechabite hall, eltham wesleyan chapel, francis thomas, george smith, henry street, i.w. lucas, james blanch, james chapman, james william brown, john jenkins peacock, john jones, john neale, john van mangerhoussen weiss, joseph cooper, joseph morris holloway, josiah atwool, keelbundora, lancelot iredale, little eltham, lizar elliott, mark blanchard, methodist church, nicholas rodda, p. mather, peter dredge, rev barnabas shaw walker, samuel jeffrey, samuel moor munce, thomas roberts, thomas wheaten bowden, william harriman, william hebblewhite, william john munce, william matthews, william rose -
Flagstaff Hill Maritime Museum and Village
Domestic object - Clothes Iron, last quarter of the 19th century
Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object -
Flagstaff Hill Maritime Museum and Village
Domestic object - Clothes Iron, last quarter of the 19th century
Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object -
Flagstaff Hill Maritime Museum and Village
Domestic object - Clothes Iron, last quarter of the 19th century
Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object -
Flagstaff Hill Maritime Museum and Village
Domestic object - Flat Iron, 1890-1935
Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Flat iron cast iron with traces of original black finish on handle. Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry, clothes ironing, sad iron, tailors goose -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Domestic object - Kitchen Equipment, sad iron with Mrs Potts handle, c1900
Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. Mrs Florence Potts invented in 1871 a detachable handle made from walnut wood with a metal latch to release the handle. These wooden handles prevented burned hands and were sold to grateful women all over the world. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.Mrs Florence Potts invented this type of detachable walnut wood handle with a meta release latch for sad irons in 1871 and it sold widely throughout the world to grateful women including those in Moorabbin Shire. The family of Ms May Curtis were early settlers in Moorabbin ShireA) A sad iron, made of cast iron , has a special handle invented in 1871 by Mrs Florence Potts of Iowa, USA. B) The detachable handle made of walnut wood to prevent burned hands, was attached to the iron by a metal latch.A) UNITED/ N0 / 50 / AUSTRALIApotts florence, iowa usa, melbourne, moorabbin, sad irons, kitchen equipmentn fireplaces, walnut wood, sewing, laundry, table ware, linen, pioneers, early settlers, washing days, craftwork -
Flagstaff Hill Maritime Museum and Village
Domestic object - Flat Iron, 1890-1935
Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Flat iron cast iron with stand None item too badly corrodedflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry, clothes ironing, sad iron, tailors goose -
Orbost & District Historical Society
black and white photograph, 1930 - 1940
This photograph shows three generations of the Russell family in Orbost. On the left is John Russell with his son Bill Russell and his wife Ede and their son Ian. John Russell Senior was a blacksmith, wheelwright, farmer and chairman of the Orbost Butter Factory, makers of Sunny South Butter (today part of Murray Goulburn Co Ltd). Bill was born at Orbost in 1893, the youngest son of John and Elizabeth Maud (nee Clarke). Upon his father’s retirement he took over the homestead part of the holding, 1,000 acres of river flats and hill land. He was involved in dairying and was also a successful beef cattle breeder and maize grower. He was elected to the Orbost Shire Council in 1929 and shortly afterwards was President for 18 months (from May 1930 to August 1931). He served a further term as President in 1934-35. He represented the South riding. He was chairman of the Bean Board and a well-known horse and show judge and a member of the Royal Agricultural Society. He was an elocutionist of some note and a member of the committee of management of the Orbost Hospital. He was also a prominent member and Past Master of the Masonic Lodge and a Justice of the Peace. He served as president of the Orbost Golf Club and assisted with the preparation and layout of the present Orbost Golf course. This item is associated with the Russell family, early settlers in the Orbost district.A black / white photograph of a family. A lady is in the middle with a man on each side and a young boy in front. They are standing outside a house in the garden.on back - "3 generations, Johnny Russell, Ede & Bill Russell & Ian Russell"russell-family-orbost -
Hume City Civic Collection
Photograph, c 1907
This came as part of a large collection of photos from Eric Boardman. Originally catalogued by R Waters on 12.02.1988. There are 3 copies of the original in black & white 20.5 cm x 25.5 cm format. According to information in the supplementary file from Bob Cahill who is the grandson of JF Cahill and son of Malachi Cahill, the identification of the photo is as follows: L to R (standing): James, John Francis (father), John, Malachi; L to R (seated): Mary / Margaret nee Ryan (mother), Polly (Mary), Michael (Mick) and ? (not specified) Margaret. NB/ Nora (Annie) who ran the Ball Court Hotel is missing from the photo. Other details: John Francis Cahill was a blacksmith & bootmaker and thought to be English; he married Mary or Margaret Ryan prior to coming to Sunbury. He built the Ball Court Hotel in 1854. (See 'Bulla Bulla'.) Nora (Annie) married a McGrath; Margaret married a Breen; James did not marry; Mary (Polly) married Justin Ford, Shire President in 1917. Malachi (born in 1878) married Mary Jane English. She was aged forty at the time of marriage & was originally from Ballarat. She worked at 'The Hill'. Malachi was a railway worker & died travelling on a train. There is also information about the Bulla Cahill family in the supplementary file.Mounted black & white photograph of the family of John Francis Cahill. It portrays 5 males and 3 females seated formally in front of a building. The photo is in sepia tonings mounted on a grey mount."Cahill Family" written in blue biro on the centre front of the mount below the photo; "Eric Boardman" handwritten in red pencil on the back of the mount.pioneers, cahill family, cahill, john francis, mary, ryan, john, malachi, polly, michael, ball court hotel, boardman, eric, ford, justin, matson & frazer, george evans collection -
Wodonga & District Historical Society Inc
Badge - Membership Albury Commercial Club, Perfection Badges, 1980
The Commercial Club, located on Dean Street is in the heart of Albury’s business and shopping district. It began on 7th May 1902, when 11 men met in the rooms of the Border City Club to form a new club. Auctioneer John Chenery chaired the meeting and in June was elected foundation president. Membership fees were set at one guinea ($2.10). The name Commercial Club was adopted, and the Club was founded as a professional and business gentlemen’s only club. A pub called the Salutation Inn and the blacksmith’s forge of Johnny McEachern once stood on the Club’s Dean Street frontage. The Club secured the site in 1935 and built the Wool Exchange on the frontage and the club behind.Peak business came during regular wool sales in the Wool Exchange, which remained part of the Club premises until 1978. The Club survived crises, including in 1916 when the whole committee was replaced. Commercial Club membership was not opened to anyone under 21 until 1997, though the voting age in Australia had been lowered to 18 in 1973. A special disco tavern for 18–21-year-olds operated briefly in 1986. By 1972 there were 800 male members. It now has almost 30,000 members both male and female and employs almost 300 staff.This badge is representative of the role played by licensed clubs in the local community.A blue and silver enamelled membership badge issued by the Commercial Club Albury, NSW for the year 1980-81Around the centre of the badge: "COMMERCIAL CLUB ALBURY" On small disc added to badge:"80/81"commercial club albury, licensed clubs albury -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Functional object - Kitchen Equipment, billy holder, c1880
A billycan, is a lightweight cooking pot which is used on a campfire or a camping stove, particularly associated with Australian usage, but is also used in the UK and Ireland. It is widely accepted that the term "billycan" is derived from the large cans used for transporting bouilli or bully beef on Australia-bound ships or during exploration of the outback, which after use were modified for boiling water over a fire. However there is a suggestion that the word may be associated with the Aboriginal billa (meaning water; cf. Billabong In Australia. The billy has come to symbolise the spirit of exploration of the outback. To boil the billy most often means to make tea. "Billy Tea" is the name of a popular brand of tea long sold in Australian grocers and supermarkets. Billies feature in many of Henry Lawson's stories and poems. Banjo Paterson's most famous of many references to the billy is surely in the first verse and chorus of Waltzing Matilda: "And he sang as he looked at the old billy boiling", which was later changed by the Billy Tea Company to "And he sang as he watched and waited 'til his billy boiled”. Early settlers , market gardeners and blacksmiths would use this portable iron stake to hold their Billies at meal times when out working their fields, travelling for work or pleasure.c1880 A molded, iron tripod stake that would hold a 'Billy can' of water over a camp or kitchen fireearly settlers, pioneers, market gardeners, moorabbin, bentleigh, brighton, cheltenham, tools, blacksmiths -
Bendigo Historical Society Inc.
Book - JOAN O'SHEA COLLECTION: CENTRAL DEBORAH UNDERGOUND PROJECT, 20th June, 1986
Joan O'Shea Collection. Central Deborah Gold Mine Bendigo Violet Street (off High Street) Bendigo Pamphlet. Buff and Sepia double-sided A4. The Bendigo Trust in conjunction with the City Family Hotel present the opening of the Central Deborah Gold Mine Underground Project, by Premier John Cain, 20th June, 1986 featuring the City Club Dancers. Includes a brief chronological history of the mine and photographs courtesy of Phillip Beer on recto side. The verso side contains a map of the site of the Central Deborah Gold Mine and also various photographs with further detail of areas of interest including: poppet legs and shaft, the change rooms, caretakers or rag pickers room where clothing was searched, the drying room, the first aid room, carbide light room, underground tours, carpenters shed, ore bins and loading bays, stamper battery, wilfley table, berdan plans, laboratory, display room, boiler, stoke hold, winding engine, boiler feed pump, electric driven compressor, steam driven compressor and the blacksmith's shop.Central Deborah Gold Mine Bendigobendigo, gold mining, central deborah gold mine -
Bendigo Historical Society Inc.
Book - LONG GULLY HISTORY GROUP COLLECTION:HERITAGE TRADE & SERVICES DIRECTORY
Copy of a Heritage Trade & Services Directory Edition 1, dated April 2001. Compiled by City of Greater Bendigo Heritage Advisory Committee. Front cover has an oval picture of part of a building with scaffolding in front of it. Listed are: Architectural Hardware; Architects; Blacksmiths; Brickwork - General; Builders; Castings - Iron and Non Ferrous Metals; Cement Decoration and Rendering; Chimney Pots; Chimney Restoration; Chimney Sweeps; Colour Consultant; Concrete - Pre-cast; Damp Control; Drafting Service; Fabric; Fencing; Fire Mantels and Inserts; Floor Coverings; Furniture Restoration and French Polishing; Garden Renovations; Glass - Etching; Glass - Leadlighting; Guttering, Galvanised Iron and Sheet Metal Work; Interior Decorating; Joinery and Carpentry; Light Fittings; Masonry Cleaning; Paint; Painters and Decorators; Paint Stripping; Plasters and Associated Products; Resurfacing - Enameling; Resurfacing - Powder Coating; Restumping and Underpinning; Roof Restoration - Iron; Roof Restoration - Slate; Roof Restoration - Terracotta; Second Hand Materials; Stone - Quarries and Cutting; Stonemasons; Tile Layers; Tiles; Turning and Verandah Roofing.bendigo, history, long gully history group, the long gully history group - heritage trade & services directory, heritage advisory committee, city of greater bendigo -
Ballarat Tramway Museum
Document - Report, Dave Macartney, "Horse Tram No. 1 Photo", c1985
Yields information about the people around the photograph of the Horse Tram at the depot with the Duncan and Fraser name board in front and has a strong association with the people named in the document.Piece of torn paper headed "Horse Tram No. 1 Photo" listing details of the men around the photograph of Horse Tram No. 1 at the depot with the Duncan and Fraser name board in the front. Handwritten by Dave Macartney c1985 as advised by Norman Fraser (a relation to Farser of the Duncan and Fraser family) See Reg Item 765. "Man in doorway with arms folded is George Fraser Snr, father of Norman Fraser. The manager Peter Hodgetts, seated on top of tram, lived at 1163 Gregory St. Company had 13 cottages for employees building along south side of Gregory St. The Frasers lived next door to the sheds. Norman Fraser remembers a horse named Nobby which could not be shod unless its legs were tied. Big George Barnett did the job. He is pictured standing in from of Mr Fraser Senior along with blacksmiths Moyce and Lang. The drivers were Nicholls, Gaston, Buckley, big George Armstrong (lying on the ground) and John Cameron. Si Barker and W. Skewes were the carpenters." trams, tramways, horse trams, duncan fraser, depot -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Domestic object - Kitchen equipment, spirit-fuelled sad iron, c1920
Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer. Late in the 19thC designers experimented with heat retaining fillings for these irons. William Coleman began selling Kerosene lanterns in 1900 in Kingfisher, Oklahoma, USA. He moved to Wichita, Kansas in 1902 and the company became world wide. The company also produced a range of cooking stoves and domestic irons. This spirit- fuelled flat iron was very popular in 1920s - 30s These sad irons remind us of the difficult circumstances experienced in their daily routines by the pioneers and early settlers of Moorabbin Shire The family of Miss M Curtis were early settlers in Moorabbin ShireA) spirit- fuelled, sad iron with chrome plated sole c1920, and metal trivet The iron is blue enamel with a white speckled body, with a hemispherical tank for the Coleman 'Lighting Petrol' that provided the heat for smoothing the material B) Coleman Fuel measuring can and funnellMetal Trivet/stand " COLEMAN" ; Petrol can " COLEMAN" / MEASURING CAN / for INSTANT LIGHTING IRON/ with printed instructionssad iron, kitchen equipment, coleman william, kansas, oklahoma, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh, fireplaces, stoves, petrol fuelled irons, spirit flat irons, coleman lamp stove co. ltd. -
Bendigo Historical Society Inc.
Document - LONG GULLY HISTORY GROUP COLLECTION: HERCULES MINE LONG GULLY
Hand written names of some of the men who worked at Hercules Mine, Long Gully. Written at the top is Driver Bill Tonkin. Before 1942 when Mine closed. The names are: Back Row - 1. Harry Harward, 2. Bonnie Bentley, 6. Archy Dumble, 7. Tom Kitt, 8. Charlie Ellis, 9. Dick Fraser, 12. Billy Goat Johns, 13. Jack Waterson, 14. Tom Bennetts - Blacksmith. 2nd Row - 4. New Williams, 5. Patsy Palmer, 6. Dave Hughes, 8. Tom Henderson, 9. Charlie Davey - Driver. 3rd Row - 1. Fred Batten, 2. Mick Meager, 7. Tom Hicks, 8. Tonkin. 4th Row - 1. Roy Rosewarne, 2. Gordon Ennor, 3. Taff Hawkins, 4. jack Trevena, 5. John Ennor - Manager, 6. Charlie Clapton, 8. Harry Pinder - Underground Manager. Written underneath is: Some Names of Men who worked at Hercules Mine, Long Gully. Paper is mounted on bright green paper which is mounted on orange card and laminated.bendigo, history, long gully history group, the long gully history group - some names of men who worked at hercules mine long gully, bill tonkin, harry harwood, bonnie bentley, archy dumble, tom kitt, charlie ellis, dick fraser, billy goat johns, jack waterson, tom bennetts - blacksmith, ned williams, patsy palmer, dave hughes, tom henderson, charlie davey - driver, fred batten, mick meager, tom hicks, tonkin, roy rosewarne, gordon ennor, taff hawkins, jack travena, john ennor - manager, charlie clapton, harry pinder - underground manager, hercules mine -
Bendigo Historical Society Inc.
Book - COHN BROTHERS COLLECTION: INVENTORY OF PLANT BOOK
Red cover note book dated 30/4/(19)15 with pencilled handwritten heading, Inventory of Plant , Brewery, W & S, [Wine & Spirits] Cordials, Malt House . Inside page is headed 'Top Room' and lists in handwriting numerous items which equipped a brewing operation. Three following pages are headed 'Wine & Spirit Store' and lists various related items. Two following pages are headed 'Brewery Cellar' and list various related items. A page and a half headed 'O W Ice Works' also lists various related items. A page headed 'Changing Room' lists various items. 'Beer Cooler & Store' page has a list of items as well as does five pages headed 'Factory'. Two pages headed 'Cooper Shed', single page headed 'Carpenter Shed', two pages 'Malt House' two pages 'New Chilling Plant, two pages 'Stable' single page 'Blacksmith', Fire Brigade Hose & Connection' ,and finally under 'Motor Cars' heading a Clement Bayard and a Talbot are named with a value respectively of 150 pounds and 500 pounds each.bendigo, industry, cohn bros brewery -
Bendigo Historical Society Inc.
Document - HAMILTON COLLECTION: THEATRE FLYER, Early 1900s
Document. Two page advertising flyer for the Comic Opera Company, Masonic Hall, Bendigo. On the back page, ''Printed at the Bendigo Independant Office, Williamson St., Bendigo''. Advertisers: W.Parkinson and Co - Copper Plate Cleaners and gold refiners. Walter E.Ellis - Tobacconist. W.Bartle - Jeweller and Watchmaker. Mrs Newman's - Coffee Palace. Jas. Burston - Watchmaker, Jeweller and Optician. Lazarus Telegraph Hotel. H.Lorenz - Tailor. Mrs A. Keast - Dining Rooms. P. Drescher - Watchmaker and Jeweller. W A Parker - Hairdresser and Tobacconist. O'Hagan's Sandhurst Hotel. Leslie's Blacksmith. Mrs Leonard - Tobacconist. J Dunne - Market Hotel. Bright's - Fish and Fruit. E J Delaney - Harp and Shamrock Hotel. Banfield and Co - Goldbrokers. Swift and Rothberg - Tailors and Drapery. Hans Irvine - Wine Sales. T Sayer - Undertaker. Terminus Hotel. Jack Francis Cafe. A Frigerio - Wire Worker. Barnett's Jewellers. B Sluyterman - Electrical Engineer. T R Jones - Chemist. Jack E Coates - Scenery for Hire. Krast and Co - Gold Brokers. Sydney P Ewing - Dentist. H Nickson - Furniture Hire. Geo Jackman - S P Bookmaker.performing arts, elocution, theatre flyer -
Bendigo Historical Society Inc.
Document - LONG GULLY HISTORY GROUP COLLECTION: OLD LONG GULLY FROM RAE'S HILL TO MCGOWAN ST
Titled Old Long Gully From Rae's Hill to McGowan St. LG. West Side - Jack Read Painter etc, Norris Bros Black Shop, Norris Bros Wood Yard & Chaff Mills, Iron Bark East Gold Mine, Sunday School, Tennis Courts Sunday School & Church, LG Fire Brigade, Creeth Street, Mine Managers Residence, Shop, Shop Mrs Hocking, Chinese Laundry, Allpress the Baker, Greenfell the Butcher, Hairdresser Beckinsall was the Fire Brigade Hotel, Dick White the Saddler, Store, Hotel Rose of Australia, Woodyard, Blacksmith Shop Wagon Repairer, Hotel Kocks (Pioneer Hotel), 2 China Shops owned by Chinese, Hotel Silver mines Hotel, Police Station, Grocers Shop (per? Reef Mine Hotel) E Bryant, Mine Windmill, Church Residence, Minister. East Side - Hopetoun Band R, Manchester Arms Hotel, Minister House, Church, IOR Hall, Shop Lollies Icecream, Boot Maker & Repairer, Back Smith Shop, Shop Childrens Wear, Butchers Shop, Creeth Street, Grocers Shop, Lolly Shop & Soft Drinks, Boot Maker & Repairer, Residence (Davey's), Lollie Shop (Fields), Dressmaker, LG Post Office (M Webb), Millars Bakers Shop, Butcher Shop, Mechanics Institute Books & Paper & Billiard Room, Connell the Baker, Dr SElby, Pentreath Organ Builder & Tuner, Blacksmith Shop, Hexagon Toilet, Kocks Machine Shop, Kocks Mine Office, Kocks Material Shop, Police Station, Dyson's Dam Warm waer, Air Station, Mine Battery stone crusher 80 head approx, Kocks Mine, Needle Mine. Some notes written at the end - Norm Shotples used to have Barber Shop - he has gone to Queensland, Violet Street started off as the German School, Wells Street used to run through Victorian Consol ? the other side, Comet Hill would like a visit. Contact Helen Gorlay at Violet Street would line to some video. Alan has good info on the Long Gully School. Betty has book. Views of Bendigo. Frank Cusack - Bendigo Trust. Bendigo School Hisking? School, Violet Street. Older levels lo?ing at Architecture.bendigo, history, long gully history group, the long gully history group - old long gully from rae's hill to mcgowan st, jack read, norris bros, iron bark east gold mine, long gully fire brigade, mrs hicking, allpress, greenfell, beckinsall, dick white, rose of australia, hopetoun band r, manchester arms hotel, ior hall, davey's, fields, m webb, millars, mechanics institute & billiard room, kocks pioneer hoel, silver mines hotel, e bryant, windmill mine, pere? reef mine hotel, connell, dr selby, pentreath, kocks machine shop, kocks mine office, kocks material shop, dyson's dam, kocks mine, needle mine, norm shotples, german school, victoria consols, helen gorlay, long gully school, frank cusack, bendigo trust -
Flagstaff Hill Maritime Museum and Village
Tool - Taps and Dies set, Wiley and Russell Mfg. Co, C. 1884
This set of taps and dies tools was owned by Frederick William McDowell (Fred) (1880 to 15-6-1967). He was a wheelwright by trade. He made and repaired vehicles such gigs, buggies, jinkers, sulkeys, spring carts and farm wagons. His workshop was on the corner of Cramer Street and Raglan Parade in Warrnambool., previously the site of Fotheringhams, and after McDowell's, and still in 2023, occupied by Reece Plumbing Fred's workplace prior to retiring was at Bryant & Waterson's in Kepler Street, opposite the Criterian Hotel, making rubber tyred horse-driven farm wagons. This Wiley and Russell hand operated, thread cutting Die and Stock, or Die and Tap, set’s patent carries the description “The taper-headed screws adjust the size; the four side screws hold the cutters firmly in the holder. Marketed as the Wiley & Russell LIGHTNING SCREW PLATE. The taper-headed screws are carried over from the J.J. Grant October 21, 1871 patent (no. 120,266). This patent was improved by Smart's Oct. 21, 1884 patent (no. 306,783).” Dies are used to cut external screw thread, stocks are the tools that hold the dies in place with countersunk adjustable screws, and taps are the tools that make the internal threads. The tools would be used by farriers, blacksmiths, wheelwrights sailing and steam ship engineers for making new, or repairing old, threads in metal. WILEY AND RUSSELL Manufacturing Company The company Wiley and Russell was established in 1872 by Solon Wiley and Charles P Russell, whose uncle founded the J. Russell Cutlery Co. The company began with the purpose of manufacturing thread cutting tools in Green River U.S. This tap and die set is an example of tools used by blacksmiths, farriers, wheelwrights and engineers on sailing and steam ships. It is also an example of early U.S. made engineering tools.Tap, Die, Die Stock set of industrial tools, fitted inside original timber box with three instruction labels attached inside lid. The set is the “Wiley and Russell LIGHTNING SCREW PLATE Pat. Aug. 5, 1884”. The lid has three metal hinges and is secured by two metal hook and eye fittings. This set of Whitworth standard threads has metal die and stocks (seven), and taps (three - the case has provision for four more die). The manufacturer’s details and the sizes of the threads are impressed into the tools. The paper labels have instructions and a diagram for the use and care of the tools. Tools have a protective oil coating. Made by Wiley and Russell Manufacturing Co. of Greenfield, Massachusetts, U.S., c. 1884; the tools were patented in August 1884, U.S. Patent 303,060. “Wiley & Russell MFG.CO, Greenfield, Mass, Pat Aug 5 1884.” “WHIT. STD.”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, tap and die set, 1884 engineering tools, wiley and russell mfg co, lightning tap and die set, tap, die and stock set, screw thread cutting tools, taps and dies, stocks and dies, lightning screw plate, cutters, j.j. grant, patent no. 120266, solon wiley and charles p russell, wiley and russell, j. russell cutlery co, green river u.s, whitworth thread, fred mcdowell, frederick mcdowell, wheelwright, gig, buggy, jinker, sulkey, spring cart, farm wagon, 2-wheeled cart, horse cart, horse cart parts, jinker buggy, transport, vehicle, horse drawn, horse jinker, bryant & waterson -
Flagstaff Hill Maritime Museum and Village
Functional object - Cow Bell, Early 20th century
Research is still being carried out regarding the inscription on this bell. Perhaps it was used for horses during the war. It may have been a souvenir or perhaps just a political statement, similar to 'Buy Australian'. Cow bells were common to colonial agriculture and transport, used wherever animals were turned out to graze overnight and had to be rounded up again next morning. Bells were fastened around the necks of household milking cows, domestic goats, bullock teams, horse teams, and camel teams, to help find them in the pre-dawn light. Station shepherds and cattle drovers also used them to warn of any disturbances to their flocks and herds overnight. The bells were a necessary item in a largely unfenced continent. So important, that Anthony Mongon began making his pot-bells at Yackandandah from 1861, August Menneke produced the “Wagga Pot” from 1867, and Samuel Jones started manufacturing his distinctively shaped “Condamine Bell” in 1868. However, these deeply resonant Australian bells were made from iron — Mongon and Jones were blacksmiths who simply beat old pitsaw blades into shape. Few genuinely brass cow bells were made here, the vast majority being imported from Britain where the industry of brass founding was already well established. (Some bells were also imported from the United States, but these too were nearly all of iron).This bell is historically significant as typical of a cow bell used by farmers and herdsmen in Colonial Victoria. Cow bell, brass, topless pyramid shape, inverted "U" shaped pin attached. Pin and clapper are iron. Bell is embossed on sides. Embossed "ADVANCE / VICTORIA" and "WWI"flagstaff hill, warrnambool, shipwreck coast, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, great ocean road, cow bell, horse bell, bell smith, vintage bell, farmer, shepherd, drover, stock bell, brass bell, advance australia, wwi -
Flagstaff Hill Maritime Museum and Village
Functional object - Nail, circa 1840
This historic bronze nail dates back to 1840s when the ship Grange was built. Nails such as this one were used for boat building, as deck fasteners and many other uses. This nail was made at a time when the shanks of nails were usually machine cut but the heads were hand formed by blacksmiths. The nail was recovered from the shipwreck of the Grange in around 1968, 110 years after the Grange was wrecked (see below for further details on the Grange). It is part of the John Chance Collection. THE GRANGE, 1840-1858- The wooden barque ’Grange’ was a three-masted ship built in Scotland in 1840 for international and coastal trade. On March 22, 1858, the Grange set sail from Melbourne under Captain A. Alexander, carrying a cargo of ballast. The barque had left the Heads of Phillip Bay and was heading west along the Victorian coast towards Cape Otway. The ship struck Little Haley’s Reef at Apollo Bay due to a navigational error and was stuck on the rocks. The crew left the ship carrying whatever they could onto the beach. Eventually, the remains of the hull, sails and fittings were salvaged before the wreck of the Grange broke up about a month later. About 110 years later, in 1968, the wreck of the Grange was found by divers from the Underwater Explorers Club of Victoria. They were amazed to find a unique, six to nine pound carronade (type of small cannon) and a cannonball on the site. There have been no other similar carronades recorded. In that same year the anchor of the Grange was recovered by diver John Chance and Mal Brown.The nail is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The nail is historically significant as an example of the work and trade of blacksmith. The nail also has significant as it was recovered by John Chance, a diver from the wreck of the Grange in the 1968. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The nail is historically significant for its association with the 1840s wooden barque, the Grange. The Grange is an historical example of a Scottish built vessel used for international and coastal trader of both cargo and passengers in the mid-19th century. The Grange is an example of an early ship, designed with a wooden hull. It is significant as a ship still available to divers along the south coast of Victoria, for research and education purposes. The Grange is an example of a mid-19th century vessel that carried a weapon of defence onboard.Nail, bronze, round head, four-sided shank, tip flattened to a rounded wedge shape. The surface is pitted and rough. There is orange and blue concretion on the shank. The nail is bent. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, west coast trader, apollo bay, mid-19th century shipwreck, the grange, scottish barque, little henty reef, captain a alexander, underwater explorers club of victoria, 1840s carronade, vhr 5297, coastal trader, wooden shipwreck, john chance, fastener, nail, square nail, machine cut mail, blacksmith, historic nail, bronze nail, carronade, mal brown -
Flagstaff Hill Maritime Museum and Village
Functional object - Nail, circa 1840
This historic bronze nail dates back to 1840s when the ship Grange was built. Nails such as this one were used for boat building, as deck fasteners and many other uses. This nail was made at a time when the shanks of nails were usually machine cut but the heads were hand formed by blacksmiths. The nail was recovered from the shipwreck of the Grange in around 1968, 110 years after the Grange was wrecked (see below for further details on the Grange). It is part of the John Chance Collection. THE GRANGE, 1840-1858- The wooden barque ’Grange’ was a three-masted ship built in Scotland in 1840 for international and coastal trade. On March 22, 1858, the Grange set sail from Melbourne under Captain A. Alexander, carrying a cargo of ballast. The barque had left the Heads of Phillip Bay and was heading west along the Victorian coast towards Cape Otway. The ship struck Little Haley’s Reef at Apollo Bay due to a navigational error and was stuck on the rocks. The crew left the ship carrying whatever they could onto the beach. Eventually, the remains of the hull, sails and fittings were salvaged before the wreck of the Grange broke up about a month later. About 110 years later, in 1968, the wreck of the Grange was found by divers from the Underwater Explorers Club of Victoria. They were amazed to find a unique, six to nine pound carronade (type of small cannon) and a cannonball on the site. There have been no other similar carronades recorded. In that same year the anchor of the Grange was recovered by diver John Chance and Mal Brown. The nail is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The nail is historically significant as an example of the work and trade of blacksmith. The nail also has significant as it was recovered by John Chance, a diver from the wreck of the Grange in the 1968. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The nail is historically significant for its association with the 1840s wooden barque, the Grange. The Grange is an historical example of a Scottish built vessel used for international and coastal trader of both cargo and passengers in the mid-19th century. The Grange is an example of an early ship, designed with a wooden hull. It is significant as a ship still available to divers along the south coast of Victoria, for research and education purposes. The Grange is an example of a mid-19th century vessel that carried a weapon of defence onboard.Nail, bronze, oval head, four-sided shank, tip flattened to a rounded wedge shape. The surface is pitted and rough. There is orange and blue concretion on the shank. The nail is bent. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, west coast trader, apollo bay, mid-19th century shipwreck, the grange, scottish barque, little henty reef, captain a alexander, underwater explorers club of victoria, 1840s carronade, vhr 5297, coastal trader, wooden shipwreck, john chance, fastener, nail, square nail, machine cut mail, blacksmith, historic nail, bronze nail, carronade, mal brown