Showing 1017 items
matching installing
-
Melbourne Tram Museum
Photograph - Overhead Track lighting Nicholson St Coburg, Melbourne & Metropolitan Tramways Board (MMTB), 1960
Photo shows extensive track lights on the left side of the single-track Nicholson St East Coburg tram line with W2 class tram 473? inbound on route 1 just to the north of Grant St. This section of track was considered dangerous and to alleviate the problem of inbound or southbound tramcars not being visible well in advance to northbound motorists, the MMTB installed the track lights. The Chief Engineer at the 24/3/1960 meeting of the Board advised of the scheme that the track lights would be progressively switched on in advance of a southbound tram. The line was eventually duplicated in Dec. 1966.Yields information about a track lighting system to improve safety on a single line of tramway in East Coburg.Black and white photo, plain backnicholson st, single line, track lights, east coburg -
Eltham District Historical Society Inc
Photograph, N. J. Tillings Timber Factory, 15 June, 1975, 15/06/1975
N. J. Tillings Timber Factory was part of the Brougham Street, Light industrial area, Eltham. This is one of 7 B/W 8x10 inch photos with notes on obverse by Dick Crichton. Accompanying letter from Florence Chrichton 2013 : "Originally sent to Shire of Eltham Engineer, Mr. McDonald. [These photographs were part of their campaign to the Shire of Eltham in 1975] claiming that the zoning regulations were being breached by the occupants of various factories in the nearby light industrial zone [Brougham Street, Eltham] - to the detriment of those living in adjoining residential zones, and that, despite .. earlier objections and complaints, nothing was done about it." Wire gate and fencing in foreground of photo displays signs relating to timber products and Dulux Paints. "The Tilling Group was established in November 1963 and began as a small factory in Eltham Victoria. The company now has large, modern offices and warehouses in most major cities across Australia" - http://www.tilling.com.au/about-us1 black and white photograph printed with white borderInscribed on back: "Front entrance to N,J. Tillings timber yard showing part of extractor fan system installed to facilitate milling operations. Sound intensified due to position of mill in valley. Valley acts as a natural sound bowl. Eltham Council were warned of this some years ago." Includes diagram of residences in relation to mill and statement that tooter blast at least ten times per day. "#Note Residences in close proximity to sound source. Pen marks on front of photograph indicating points of interest.industrial estate, brougham street, eltham, 1975, bolton street, dick crichton, n.j. tillings, timber factory, shire of eltham, milling, fan -
Federation University Historical Collection
Object, Synchronome Co. Ltd, Synchronome Frequency Checking Master Clock No. 2191, c1930
Information from Norman F. Dalton: Ballarat had a reticulated DC supply in the early part of last century and in 1905 had sufficient generating capacity to enable the trams to be changed from horse drawn to DC electricity. The use of electricity increased with the main power station located on Wendouree Parade, near Webster Street, under the ownership of The Electric Supply Company of Victoria. AC generating plant was installed in 1925 and conversion to AC proceeded. In 1934 the company was taken over by the State Electricity Commission Victoria (SECV) and more AC generation was installed and the changeover of customers was accelerated. This is around the time that the Synchronome Frequency Checking Mast Clock was installed at the Wendouree Parade Power Station. The SECV Annual Report of 1921 states: ::Section 11 of the act directed the COmmission to enquire into the question of securing the adoption of such standards of plant and equipment of a system, frequency and pressure for the generation and distribution of electricity as will admit of the efficient interconnection of undertakings throughout the State. In 1934 when the SECV took over the Ballarat operations the question of linking with the State grid had been a planned operation for some years but due to financial considerations had hindered it and in fact would continue to do so for a further 10 years. So while the need for close frequency control for interconnection was hardly an issue, the need to keep electric clocks correct was important, particularly as this item was a frequent sales point to cover the inconvenience and sometimes expense of converting from DC to AC. The clock is a very accurate pendulum clock with provision for varying effective length during operation for precise time regulation. There are two normal time dials and one is controlled by the pendulum and the other is operated by the system frequency. When the clock was in use it was installed by the MEter and Tests Laboratory and the time was checked daily by radio time signals. The two dials were repeated in the operators control panel in the Power Station. A maximum deviation between the two dials was set in the operating instructions (eg 5 seconds) and the operator would correct this when necessary by remote manual alteration of the turbine governor set point. The clock was used to drive and regulate a system of "slave" clocks which were used to display the time in various locations around the power station. A slave clock is a simple clock which is driven by a small electric motor, its accuracy is regulated by the master clock every 30 seconds to ensure that it and all the other slave clocks in the station are on exactly the right time; slave clocks were placed in various locations, from common rooms to workshops. A master clock could potentially run thousands of slave clocks at one plant. The clock also contains a rectifier. A rectifier is a device that is used to convert AC power to more stable DC current.Two clocks in a timber case. Both are electric, one is powered by the main pendulum mechanism, the other is a self contained electric clock. The main mechanism is of the gravity arm and roller type, which sends an impulse to the slave clocks every 30 seconds. The This Synchronome Frequency Checking Master Clock was used at the Ballarat Power Station. Below the main section of the case is a smaller cabinet containing a rectifier to provide consistent DC power for the clock. The rectifier was made by the Victorian company Hilco, which was located in Burwood. There is a high chance this is not the original rectifier from this clock as there appears to be brackets to hold a larger device in the space the rectifier occupies.Front below main clock face on front of case: "Patented Sychronome Brisbane" Lower left-hand clock face: "Frequency time" Lower right-hand clock face: "Standard Seconds" Synchronous electric clock mechanism on door (Frequency time clock): >200/250 V. 50~ >"Synchronomains" Made in England >Direction indicator for clock starting switch >"To start move lever in direction of arrow and release" >"Patent applied for" Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for main clock face: >"English Made" >"Patented" >Serial number "8751" >0 above right-hand pillar on front-plate Inside case, back panel, top enamel plate: >Seconds Battery + Pos. > Battery Common or - Neg. >1/2 min dials Inside case, back panel, bottom enamel plate: external seconds dial Inside case, right hand side, electrical knobs: two switches, both "A.C. mains" Pendulum rod, below suspension spring: Serial number (?) 0000005 Rectifier in bottom cabinet: >"Hilco Rectifier" >"A.C. Volts 230/240" >"Model 1060/S" >"A.C. Amperes" >"Serial No. 1060/S >"Phases 1" >"D.C. Volts 6" >"C.P.S. 50" >"D.C. Amperes 1" >"Made in Australia by Hilco Transformers McIntyre St., Burwood, Victoria." Bakelite electrical plug: makers mark Lower cabinet, RH side panel, pressed tin plate: "AC" (upside down) Brass speed adjustment, outer right RH side: "S" and "F" Ivory and wood pendulum beat ruler: >Ruler, with 0 in centre and numbers 1-5 in ascending order from centre on left and right. > "Synchronome Patent." Steel plate, back panel, inside case, right hand side: >N R A" (descending) >"2191" serial number/part number Face of main clock: "Synchronome Electric" synchronome frequency checking master clock, electricity, state electricity commission, wendouree parade power station, secv, clock, time, pendulum, electric supply company of victoria, norman f. dalton, ballarat power station, rectifier, slave clock -
Kiewa Valley Historical Society
Frame Photograph, circa early 1900s
This photograph frame with its decorative dragon and bamboo shoots was typical of the early 1900's when photography was in the hands of the professional artist. It was in a period before the "instant" photo and required a dark room and processing liquids for development. It was therefor in a time when photographs were "shot" only at important events, be they family or public occasions. Good quality picture frames such as this item were a part of the "reverence" of photographs per se.This photograph frame holds and protects, part of a very significant occasion, the 90th birthday photograph of the matriarch of one of the founding families within the Kiewa Valley. The frame therefore has historical significance.This silver painted aluminium photograph frame has a glass front pane within a formed inlay and a formed inlay at the back. The anchor points, at the back, for securing toggles are in place but not the toggles. These toggles were installed to allow the photograph to be securely positioned within the correct alignment of the the frame.The metal front plate has seven rivets holding the cloth covered cardboard back frame to the metal front cover. The front part of the frame has sculptured dragon and wild bamboo shoots and is boarded with a plain border pattern. The back panel to secure the photo and hold the stabiliser flap is missing. See also KVHS 0092 for a more complete frame.photograph frame early 1900's, the roper family -
Kew Historical Society Inc
Archive (Sub-series) - Subject File, Kew Historical Society, Horse Trough & Hitching Post [Kew], 1966
Various partiesReference, Research, InformationSecondary Values (KHS Imposed Order)Correspondence and published articles relating to the horse trough and hitching post outside the gates of the Boroondara General Cemetery. The earliest item of correspondence is a typed and signed letter from the historian Dorothy Rogers to Mrs West, Secretary of the Kew Historical Society, dated 13 Feb 1966. It relates to transport, including horse trams that travelled through Kew. Another letter from B F Bade in 1986 identifies the hitching post as having been once located outside the old Kew Town Hall in Walpole Street, and dating from 1907. The latter was acquired in 1987 and installed in 1988 during the Bicentennial. The horse trough was originally located on this site and restored in 1988.kew historical society - archives, kew - history, boroondara general (kew) cemetery, george bills, annis bills, horse transport - melbournekew historical society - archives, kew - history, boroondara general (kew) cemetery, george bills, annis bills, horse transport - melbourne -
Melbourne Tram Museum
Photograph - Digital Image, Kevin O'Reilly, St Kilda looking east over St Kilda Junction, late 1925
Image from CD (Compact Diskette for use in computers) - see Reg Item 135. Image titled "St Kilda" on CD, of looking east over St Kilda Junction from. Has St Kilda tramway Jtn (St Kilda Road, Fitzroy St, Barkly St, Brighton Road, Wellington St and Punt Road in the photograph, and the "Junction Oval". Mid to late 1925 as workmen are converting the cable track in Fitzroy St and Wellington St looks or appears converted with a crossover installed near the junction. Two cable car sets visible in St Kilda Road, on in Brighton Road and a bus? Also a bus? in Fitzroy St.trams, tramways, st kilda junction, st kilda railway station, fitzroy st, brighton rd, cable trams -
Glen Eira Historical Society
Letter - St. Mary’s Church, Caulfield
St. Mary’s Anglican Church, photocopied document of the history of the music. Includes details of various organs the church has had from 1867 to 1982. List of organists and details of the choices of music played and types of choirs. Dated August 1985, compiled by C.G.T. Weickhardt. Original printed leaflet on the new organ to be installed in St. Mary’s in 1933. Letter of notification to Vicar B. Green, St. Mary’s Anglican Church from Ian Wight, Conservation Manager of the National Trust of Australia, Victoria, dated 21/05/1996, that their pipe organ has been classified and included in the register.woodward mrs., weickhardt c.g.t., glasson w.s., taylor h. mrs., hardiman j.j., stephen miss, hart mr., kaye s., dixon miss, dumergue charles, rooksby h.a., wright j.d., dixon f., fethers mr., knight mr., hardy lance, hardy daniel henry, dickson h.s., spiers mr., smithers welsford mr., tuckwell c., nutting foster -
Kiewa Valley Historical Society
Journal - Reference, Mountain Work and Walks 1945-48,The Joy of Being Alive, circa 1950s
This journal detailing the author and friends walks and observations together with black and white photographs of the Kiewa Valley and the Bogong high plains regions during various "walks during the years 1945 to 1948. These walks were undertaken during the various Hydro - electricity generating plants and infra structures were being installed. It relays how the walker and adventurer enjoyed the pristine Alpine regions of Victoria. The wilderness and higher sense of adventure encountered by the author and his "walking party" is now no longer that intense. The isolation of the region was, at that time, still a barrier for the casual adventurer and required a dedication of the "pioneer" mountain walker.The significance of this journal is that both the photographs and accounts of those intrepid adventurers walking throughout the Victorian Alps and the Bogong High Plains details the countryside in one of the remaining years of relative pristine and minimal "tourist" developed regions of rural Victorian. The necessity of greater electrical power supply to the rapidly growing demand from cities and larger towns, post World War II immigration, had resulted in drastic changes to the infrastructure of the Victorian Alpine regions and particularly the Kiewa Valley. The photographs and the written accounts of the "adventurers" in this journal presents the last phases of the " Australian rough outback environment" and also the typical "bush wise" city/town dweller that although lived in towns and cities still had the adventurers heart of their fore fathers.This item has been photocopied by the author of his journal, consisting 27 pages of A4 size paper. A covering letter by the author is at the front of this loose leafed journal. The journal is bound in a yellow plastic cover with spirals. At the back is a 2 page biography of Myrtle Emily (Grigg) Deamer 1922-2006, then a photo of Meg with baby Bryn and son Tony followed by a letter from David BottomleyThe author's correspondence and covering letter has his signature "D Bottomley"alpine country, bush walking, bogong mountain, alpine adventures -
Warrnambool and District Historical Society Inc.
Book, Telephone Directory Melbourne May 1933, 1933
This is a telephone directory of the telephone numbers and addresses of residents and businesses in Melbourne in 1933. There had been several early attempts in the second half of the 19th century to link places and homes in Victoria by locally-made telephone systems with a commercial telephone system in the same year successfully linking a business in Melbourne to a branch office in the same city. The first telephone exchange in Australia was established in Melbourne in 1880. This 1933 telephone directory shows the growing number of private residents and businesses to have the telephone installed but the installations were still confined mostly to the more affluent private residents and to businesses. This book is of considerable interest as a reference guide as it provides the names and addresses of those who had a telephone installed in Melbourne in 1933. This will be of great use to researchers, especially those compiling their family tree. This is a soft cover book of 364 pages. It has a buff-coloured cardboard cover with the title and other printed information on the front cover and four multi-colour advertisements for Melbourne businesses (Barnet Glass Tyres, Renown Dry Cleaners, C.O.R. Motor Spirit and Edward Dyason, Sharebrokers), also on the front cover. The back cover has a colour advertisement for Gilbey’s Gin. The pages listing the householders’ telephone numbers and addresses in alphabetical order are white with black printing and there are 20 pink pages at the back (business and professional listings). The book has been bound with glue. The cover is somewhat crumpled and the pages are dog-eared. melbourne history, telephone installation history in victoria, warrnambool, history -
City of Ballarat Libraries
35mm Slide, Ballarat Railway Station circa 1950s
Ballarat Railway Station photographed from Platform 2. The tower can be seen without the clock which was only installed after a fire in the 1980s. The B class diesels were the first mainline diesel locomotives built for the Victorian Railways, in 1952-3. They were unusual in having a streamlined drivers cab at each end. Mrs Bon Strange and her husband Bert were well known Ballarat residents. When Mrs Strange died some years ago, her extensive slide collection was sorted through and those relevant to Ballarat were gifted to the Ballarat Library. ballarat train station, victorian railways, diesel locomotive, clock tower, b class locomotive -
Ballarat Tramway Museum
Photograph - Geelong tram No. 2 at T&G Corner Geelong, c1938
The photo shows Geelong No. 2 in Moorabool St at the intersection with Ryrie St. The tram has the destination of North. The tram is in its modified form that provides for one-man operation. In the photo are Edments, Savoia Cafe, Commercial Bank of Australia, and the T&G building. The photo has been dated between 1935 when the tram was converted and 1939 when the bar neon traffic lights were installed at the intersection. The photograph was taken from a Victorian Railways glass negative held at the State Library of Victoria. See item 8360 for a digital copy of the SLV scan - http://handle.slv.vic.gov.au/10381/97173Yields information about Geelong No.2 and the intersection of Ryrie and Moorabool Streets Geelong.Black and white photograph with a number of rear.In pencil "2171" on rear.tramways, trams, geelong, ryrie st, moorabool st, temperance & general, tram 2 -
Sunbury Family History and Heritage Society Inc.
Photograph, C1916
Joseph Starkie was the Chairman of the Sunbury Waterworks Trust from 1905 to 1913. During that time he was instrumental in getting a permanent water supply installed for the town of Sunbury. After his death in April 1913, the townspeople erected a memorial which stood at the intersection of Brook and Stawell Street. It was unveiled on 26 January 1915 by Terence O'Brien. The original memorial included a drinking fountain and horse trough. As traffic increased within the town, the centre section of the fountain, without the horse trough, was resited in a reserve opposite the Memorial Hall. The photograph shows the monument on its original site. The installation of a reliable and permanent water supply for Sunbury was an important achievement for the town in the early years of the twentieth century.A sepia photograph in post card format of a water fountain and trough in a street in front of an avenue of trees.J. D. STARKIE MEMORIALstarkie, joseph daniel., water fountain, j.d.starkie memorial -
Parks Victoria - Wilsons Promontory Lightstation
Weights
The rectangular weight is rectangular in shape and made of concrete and metal. A closed metal hook is attached to the concrete block, which is encased in metal, and a section of rope is attached. It was used as a counter weight on a canopy that operated as part of a winch located at the [east] landing deck … Originally there were four weights that formed part of a fibreglass canopy which consisted of a staunch, pulley and a rope so when you lifted the canopy up, the weights on either side countered the weight so objects could be moved. The weights were installed in the 1970s and were dismantled along with the winch in the following decade.The weight has first level contributory significance for its provenance and historical value as a component of an earlier apparatus that was used for hoisting goods at the lightstation sea landing.2 x Rectangular shaped weight with with closed hook embedded in concrete surrounded by metal. A section of rope is attached to the hook. -
Mission to Seafarers Victoria
Artwork, other - Stained glass window, Brooks Robinson & Co et al, Thou of little Faith, 1917
This window along with the the second window in the reredos was donated by the Misses Forge in memory of their brother, James Leslie Forge, 33yo, who died on the 23 April 1917 while working on his orchard in Wingello, NSW. A Footscray local, he had donated the funds (100 pounds) for the reredos of the St Peter chapel. Follow Me and Thou of little Faith in the Sanctuary of the Chapel were probably installed at or around the time that the building was erected. The windows are attributed to Brooks, Robinson & Co. on stylistic grounds, probably designed by William Wheildon and drawn up into a full scale cartoon by George H. Dancey c1918.Arched stained glass windows with design and texts from St. Matthew’s Gospel reference water by showing the Sea of Galilee and Christ stilling the water. The ornamental borders have the anchor of hope in the point directly central above the scene.‘Thou of little Faith Wherefore dost thou doubt’ Matt. 4.31 / To the Glory of God, and in loving memory of / J. Leslie Forge / This window is given by his sister R.F.altar, st peter chapel, flinders street, mission to seafarers, seamen's mission, mission to seamen, st peter, sailors, seamen, anchor, stained glass windows, win, 1917, ww1, memorial chapel, reredos, footscray, james leslie forge, ruby forge, forge's store, gifts-1917 -
Mission to Seafarers Victoria
Artwork, other - Stained glass window, Brooks Robinson & Co, Follow Me, 1917
This window along with the the second window in the reredos was donated by the Misses Forge in memory of their brother, James Leslie Forge, 33yo, who died on the 23 April 1917 while working on his orchard in Wingello, NSW. A Footscray local, he had donated the funds (100 pounds) for the reredos of the St Peter chapel. Follow Me and Thou of little Faith in the Sanctuary of the Chapel were probably installed at or around the time that the building was erected. The windows are attributed to Brooks, Robinson & Co. on stylistic grounds, probably designed by William Wheildon and drawn up into a full scale cartoon by George H. Dancey c1918.Arched stained glass windows which design and texts from St. Matthew’s Gospel reference water by showing the Sea of Galilee and Christ stilling the water. The ornamental borders have the anchor of hope in the point directly central above the scene.‘Follow Me and I will make you fishers of men ‘ Matt. 4.19 / To the Glory of God, and in loving memory of J. Leslie Forge / This window is given by his sister E.F.altar, st peter chapel, flinders street, mission to seafarers, seamen's mission, mission to seamen, st peter, sailors, seamen, anchor, stained glass windows, win, 1917, ww1, memorial chapel, reredos, footscray, james leslie forge, edith forge, forge's store, gifts-1917 -
Darebin Art Collection
Artwork, other, Megan Evans, Millie Yarran, Ian Johnson, Les Griggs, Elaine Trott and Ray Thomas, Koori Mural, 1983
The Koori Mural was designed by artist Megan Evans in consultation with a committee from the Aborigines Advancement League consisting of the late Lin Onus, the late Molly Dyer, the late Ron Johnson and the late Elizabeth Hoffman. It was painted by Evans and renowned Aboriginal artist Ray Thomas along with Ian Johnson, Millie Yarram, Les Griggs, Elaine Trott and a number of volunteers. The mural has considerable historical and cultural significance and refers to the experiences of the the Aboriginal and Torres Strait Islander communities, from early colonial history to the more recent struggle for social justice. In 2014 the mural was replicated onto a vinyl banner and installed at its current site. The Northcote Koori Mural was originally located on Council land in High Street, Northcote, opposite the Northcote Town Hall. A huge, free-standing wall was built specifically to accommodate the mural which was painted on site. The land on which the mural was housed was later sold, however, and the mural was relocated to the Aborigines Advancement League in St. Georges Road, Thornbury. Conservation work in 2014 and original panels decommissioned and vinyl banner hung in its place (with Total Outdoor Media). In 2015 solar lights were installed along with landscaping to the front of the mural and a plaque depicting the history on the mural. -
Federation University Historical Collection
Photograph - Colour, Phil Bryce, Removal of a fibre-glass chimney extension from a chimney from the former Ballarat Brewery, 2015, 13/11/2015
The chimney extension on what was the former Carlton and United Breweries boiler house at Ballarat installed in 1972 and it is constructed of a special formulation of fibreglass reinforced plastics designed to operate at elevated temperature (ie boiler flue gas). It is thought to be one of 26 or 28 fibreglass boiler chimneys designed and installed in Victoria in the 1970s, and is thought to be one of the last to be removed. In its day the fibreglass chimney extension was at the cutting edge of fibreglass technology and is therefore well worth retaining. Removal of the chimney extension to the brick chimney outside the brewery building was deemed necessary to prolong the life of the chimney, and also because the fibreglass extension had reached end of life and posing a possible threat. According an Engineering assessment, fibreglass structures have a life expectancy of between 20 years (when fatigue loaded) and up to 100 years (static loaded). We don’t know when it was added to the chimney but believe it was most likely in the early 1970s. Given that it is subject to wind load and often observed to be moving in the wind it is likely that it will be at the end of its life. The chimney will be made good and we have the necessary planning approvals in place to undertake the works. The chimney extension was removed on 13 November 2015 in accordance with a planning permit obtained by the University. The extension is believed to have been added in the 1970s and was predominantly made from fibre glass. The structure was removed for safety reasons and to preserve the integrity of the historic brick chimney which supported it. Coloured digital photographs associated with the removal of a fibreglass extension to a chimney which was part of the Former Ballarat Brewery/Carlton and United Breweries complex. Images also include the last day the chimney was in situ.chimney, fibreglass, former ballarat brewery, former carlton and united breweries, ballarat school of mines, brewery complex -
City of Ballarat
Artwork, other - Public Artwork, Andor Mészáros, Shakespeare by Andor Mészáros, 1960
The well known sculpture of English playwright William Shakespeare takes an elaborate bow before the Civic Hall, a performance and community center for Ballarat. The unique abstract and elongated mannerist style used in this cast bronze sculpture hints at the art deco style of the Hall behind. The sculptor, Andor Mészáros, was from Budapest but created much of his work in Melbourne. He also created works for Canterbury Cathedral in the UK and several carved stone sculptures for Sydney Hospital. The artwork was commissioned in 1959 through a widely publicised competition and installed in 1960. In addition to making sculptures, Mészáros was also renown as a creator of medallions. In 1951 he received 'the highest award' at the International Medallion Exhibition, Madrid and in 1964 he won the 'purchase prize' at the International Medallion Competition, Arezzo, Italy. From 1970 Mészáros worked with his younger son Michael, also a sculptor. In 2002, the City of Ballarat granted permission for Michael Mészáros to make a cast of the Ballarat Shakespeare artwork to create replica installed in Budapest. The Budapest installation commemorates Shakespeare's connection to the City and the achievements of Andor Mészáros. The artwork was unveiled by Mayor Arthur W. Nicholson. The statue was presented by L.F. North, general Manager of the Fidelity Trustee Company Limited, representing the late H.P. Stevens as one of the benefactors whose generosity enabled the Statue to be erected.The artwork is of aesthetic significance to the people of BallaratLarge bronze statue of William Shakespeare mounted on a stone plinthWilliam Shakespeare 1564-1616. Erected by benefactions from Harry Pearson Stevens who settled here 1855 and other Citizens unveiled by Arthur W. Nicholson J.P. Mayor.17.11.1960shakespeare, andor mészáros, civic hall, ballarat -
Eltham District Historical Society Inc
Photograph, Fay Bridge, Warrandyte cool store, 9 September 2019
Remains of the old Warrandyte Dairy — Originally constructed to store milk for delivery from Mapleoak Dairies, delivered by the Bellinger family, up until the early 1970s. The Warrandyte Dairy closed in 1987 before the land and building was purchased by Melbourne Water in 1988 to reduce flood risk to the community and preserve riverside land from development on the site which sits on the Yarra River flood plain. In 2017, through a partnership with Manningham City Council, Warrandyte Historical Society and the Warrandyte Community Association, Melbourne Water renovated the 73-year-old site and installed interpretive signs detailing its history for the community.2019-09-09, fay bridge collection, warrandyte cool store, warrandyte dairy -
St James Old Cathedral
Cathedral Building, St James Old Cathedral, 09/11/1839
St James Church, "Church of the Pioneers", was the first Church, first Anglican Church, and is the oldest building in Melbourne. The foundation stone was laid in 1839 by the Superintendent of the District of Bourke, Charles La Trobe, later Governor of the Colony of Victoria. The Church was opened in 1842 and the first Bishop Charles Perry was installed in the Cathedral in 1848 when its status changed to that of Cathedral. Its status changed back to that of a Parish church after 1891 when St Paul's Cathedral in Swanston Street was opened. St James is known as the "Church of the Pioneers" as it served as the place of worship, marriage, baptism and burial of many of the first families in the District of Bourke and the Colony of Victoria. St James Old Cathedral is of the most important historic value to the community of Victoria and to the Australian nation as the first Anglican Church founded within 4 years of the settlement of Melbourne. It represents and conserves the very earliest history of white settlement in Victoria and preserves the church associated history of the Pioneer families of Victoria in its collection of original records and artefacts. Late Neo-Georgian style stone church building with bluestone footings. Octagonal upper one storey bell tower housing eight bells supported by two storey square towers. Body of church has sloping roof and 4 stained glass ornamental windows on each of west and east sides with decorative sanctuary window to the north. Decorative Portico with columns on the north outside elevation. National Trust Commemorative plate on outside wall to right of east entry door. -
Ballarat Heritage Services
Photograph - Digital photographs, L.J. Gervasoni, stained glass window - St John of God, c2016
Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Stained Glass at the St John of God Hospital Chapel .ballarat, heritage, st john of god, hospital, stained glass -
Ballarat Heritage Services
Photograph - Photograph - Colour, Bruce Hutton (Almond Glass Works), Stained Glass at the St John of God Hospital Chapel by Bruce Hutton, 2017, 2017
Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Colour photograph of stained glass feature wall at the chapel in St John of God Hospital, Ballarat.stained glass, st john of god hospital, ballarat, bruce hutton, almond glass works -
Ballarat Heritage Services
Photograph - Photograph - Colour, Stained Glass at the St John of God Hospital Chapel [detail], 2017, 2017
Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. stained glass, st john of god hospital, ballarat -
Ballarat Heritage Services
Photograph - Photograph - Colour, Stained Glass at the St John of God Hospital Chapel [detail], 2017, 2017
Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. stained glass, st john of god hospital, ballarat, bishop, pectoral cross -
Ballarat Heritage Services
Photograph - Photograph - Colour, Stained Glass at the St John of God Hospital Chapel [detail], 2017, 2017
Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Stained glass panel of 'Weeping Bailey's' house, now part of St John Of God Hospitalstained glass, st john of god hospital, ballarat, bailey's mansion, weeping bailey, architecture -
City of Ballarat Libraries
35mm Slide, Morshead's Department Store, Bridge Street Ballarat, circa 1950s
Morshead's was a popular department store in the 1950s and 1960s. In this night exposure the famous window displays can be clearly seen. Also at the extreme right of the photograph the verandah over 'the bridge' can be seen - the creek is covered over making an arcade. Also the verandah posts which were all removed in the 1960s and cantilevered verandahs installed throughout Ballarat. Mrs Bon Strange and her husband Bert were well known Ballarat residents. When Mrs Strange died some years ago, her extensive slide collection was sorted through and those relevant to Ballarat were gifted to the Ballarat Library. bridge street, department store, trams, illuminations, shop windows, advertising -
Ballarat Tramway Museum
Magazine, State Electricity Commission of Victoria (SECV), SEC News, May June 1953
Published for the staff of the SEC, features the Kiewa Valley transmission line, North East towns and workers, industry, Bendigo Tram's Golden Jubilee, (AETA Visit, Mr George Laurens, Doug Dean, Tom Lynch and Basil Miller), electrical safety, meter reading in the country, sports, electric cooking, and sports section. In the retirements were Mr P Pithie, Senior Traffic Inspector Geelong, Mr V Pipps Depot Foreman Geelong and Mr S Watson, Geelong Senior depot clerk. On the inside cover are photos of the package power stations being installed at Geelong, Ballarat (Ballarat B) and Mildura.Demonstrates a SECV Staff magazine.Magazine, 36 pages, black and white production, centre stapled.Has RHSV stamp on the cover and "Case ViiiA" in inktramways, geelong, secv, retirements, ballarat b power station, power stations, bendigo -
Federation University Art Collection
Artwork - Marquette, Malcolm Fraser by Peter Nicholson
John Malcolm Fraser AC, CH, GCL (21 May 1930 – 20 March 2015) was the 22nd Prime Minister of Australia and the Leader of the Liberal Party from 1975 to 1983. Fraser's bust was originally created by Victor Greenhalgh. However, Greenhalgh and others were critical of the final casting. Following Greenhalgh's death in 1983, Peter Nicholson was asked to create a new bust for Fraser, which was completed after the bust of Fraser's successor Hawke had been installed. This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007. A plaster marquette of Prime Minister Malcolm Fraser produced for the bronze bust in the Ballarat Botanical Gardens' Prime Ministers Avenue.art, artwork, prime minister, prime minister's avenue, malcolm fraser -
Wodonga & District Historical Society Inc
Photograph - Wodonga West School No. 1058
Wodonga West School opened on 24 January 1870 and closed on 9 May 1950. It was located near the current intersection of McKoy Street and the Hume Freeway in West Wodonga on land donated by J.W. Klinge. The school replaced an older school, “Green Hills School, which was located north of the railway line. A public telephone was installed at the school and the mail service operated from the school three days each week. In 1935 a row of 15 ornamental trees was planted along the boundary fence, one for each of the pupils at the school. When this school closed the nine remaining students were transferred to Wodonga Primary School.This image is significant because it documents the early developments in the provision of education in Wodonga, Victoria A black and white photo of a group of children standing outside the Wodonga West School building.wodonga schools, wodonga west primary school, education wodonga -
City of Kingston
Photograph - Black and white, c. 1948
Located in the southeast Melbourne district of Ormond. The Ormond Theatre was opened in the late-1920’s with 720 seats in stalls and circle. There was no ceiling in the auditorium, which allowed for the steel roof trusses to be seen. In 1930 a Western Electric(WE) sound system was installed. In 1940 it was remodelled in a simple Art Deco style to the plans of architectural firm Marsh & Michaelson. It re-opened in 1941 with 995 seats. By 1946 it was operated by Albert Park Cinemas Property Ltd. The Plaza Theatre was closed on 30th November 1958. It was converted into a carpet showroom which was still operating in late-1984. The building has since been demolished.Black and white photograph depicting the art deco facade of the newly refurbished Plaza Theatre, Ormond. There are no buildings either side of the theatre which highlights its large size.Black printed text on white round sticker adhered to reverse: 187 Handwritten in red ink on reverse: 72%theatre, movies, entertainment, plaza, suburbs