Showing 8445 items
matching wood
-
Upper Yarra Museum
Mallet, Wooden
A wooden Mallet could be found in most homes, and nearly all tradesmans tool box or bag, its most common use was working with wooden handled wood Chisels, because they did not damage the end of the chisel like a steel headed hammer,also they were used to fit joints of wood together as they would not damage the timber like steel hammers......Wooden mallets were also used by stone masons back to the time of the pyramids, but they were usually shaped differentlyWooden Mallet A handmade wooden mallet with a handle with a rectangular head. Carved ET on sidewood, mallet, tradesman, carpenter, cabinet maker -
Tatura Irrigation & Wartime Camps Museum
Chair - folding, 1940's
Made in Camp 3, Tatura by internee and used there as an item of furnitureHandmade slatted wood folding chair with metal screws, studschair, wood, bissinger g, camp 3, tatura, ww2, furniture, domestic, handcrafts, woodwork -
Marysville & District Historical Society
Photograph (item) - Colour tinted photograph, Valentine Publishing Co. Pty. Ltd, The Road to Cumberland Valley, Marysville. No. 1, 1923-1963
An early colour tinted photograph of the intersection of the Buxton Marysville Road and the Marysville-Wood's Point Road.An early photograph of the Buxton Marysville Road and the Marysville-Wood's Point Road intersection. The Marysville-Buxton Road joins the Maroondah Highway which leads to Alexandra. The Marysville-Woods Point Road was originally part of the Yarra Track, constructed in the early 1860s to provide access between Healesville and the Woods Point Goldfields. Despite the steep terrain and engineering difficulties, the Yarra Track soon became a busy route used by pack horses, horse-drawn drays, and wagons. Today this sealed mountain road is a popular scenic drive between Marysville and Warburton. On the right of the photograph can be seen 'The Crossways Hotel' which is circa 1920 and one of the oldest buildings still standing in Marysville. 'The Crossways Hotel' survived the 2009 Black Saturday bushfires, through the efforts of the owner using buckets of water from the nearby Steavenson River. In the background can be seen the Poontawan Guest House which later became the Marysville Chalet Guest House which was on the site of the original Steavenson's Hotel. That guest house no longer exists and the Christ Church stands on the land where the guest house once stood. This photograph was published by the Valentine Publishing Co Pty. Ltd as a souvenir of Marysville.marysville, victoria, marysville chalet guest house, crossways hotel, christ church marysville, poontawan guest house, steavenson's hotel, valentine publishing co, souvenir, yarra track, wood's point road, mining, buxton-marysville road, marysville-wood's point road, maroondah highway, alexandra -
Mont De Lancey
Tool - Saw, Crosscut Saw, Unknown
Used by Edgar R Sebire.A Peg tooth forged steel crosscut saw with two wooden handles bolted on. It was used to saw rough wood or cross cut wood against the grain. It was used in the late 19th Century by Edgar R Sebire.hand tools, woodworking tools, carpentry tools, wood, steel, hand saws, saws, cutting tools, crosscut saws -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, S.S. Casino
Ship model of coastal trader SS Casino in glass fronted case with stained wood frame. Ship has both steam and sail. Background of lighthouse on cliff, sea and sky. Ship painted green, 3 flags flying. Details (incorrect) of ship painted in white across top frame of case. The S.S. Casino was a passenger and freight steamer built in Dundee, Scotland, in 1882 for the Newcastle and Hunter River Steam Navigation Company of N.S.W. She weighed 425 tons gross with a length of 160.4 feet, beam of 24.1 feet and depth of 10.2 feet. She had saloon accommodation for 35 people, forecabin for 25 more people, and she carried 300 tons of cargo. While on her delivery journey on May 30th 1882 the S.S. Casino called in at the Port of Warrnambool for coal ., narrowly escaping going ashore in gale force winds due to the quick action of the pilot. At that time, still at anchor, she impressed the directors of the Belfast and Koroit Steam Navigation Company so much that they bought her immediately; she was ideal for trade in along the West Coast of Victoria. (Belfast is the original name for Port Fairy, South West Victoria. The Belfast and Koroit Steam Navigation Company was first managed by Messers. Saltau and Osburne and after the passing of Mr. Osburne, by produce merchants Messers H. Sautau and Sons, whose had a hay and corn store and shipping agency was on the corner of Liebig and Koroit Streets in Warrnambool. ) The S.S. Casino became “the most famous steamer to operate in Victorian waters along the West Coast” by author Jack Loney. Captain Boyd was her first Master, followed by Captain Chapman, who stayed with her 1890 until 1924. Captain W. Robertson followed for a short term, then Captain Middleton then took command 1925 - 1932. The S.S. Casino had several mishaps during her life. One was on 3rd January 1898 when she collided with the S.S. Flinders in Apollo Bay with minor damage. Another was on 24th October 1924 when she grounded on a reef at Point Hawdon near Grey River and most of her cargo (of Christmas goods) had to be dumped into the sea. Then in February 1929 she was ‘holed’ when she struck a submerged object as she entered Lady Bay, Warrnambool. On the morning of 10th July 1932, after attempting to berth at Apollo Bay jetty in heavy seas, Captain Middleton decided to take her out into the bay and wait until the seas abated. It was not realised that the anchor used to steady her as she manoeuvred to her berth had pierced her hull. She put about and headed for the beach but sank. Captain Middleton and nine others lost their lives; nine people were rescued including the two female passengers . Captain Middleton had been in charge of the S.S. Casino for seven years. He was the first ship’s Master to lose his life through shipwreck in the West Coast trade. In the years following the turn of the century the S.S. Casino remained the only regular trader with normal passenger accommodation along the West Coast. From 1882 she had made at least 2,500 voyages on the one run. Flagstaff Hill’s collection has a photograph of a portrait of Captain Chapman, , a ship model of the S.S. Casino that shows both forms of power under which she sailed, steam and sail. The ship is painted green and flies three flags. The inscription across the case of the ship model, incorrectly dated, tells the sad story of the wreck of the ship and the loss of lives on July 10th 1932 at Apollo Bay. A print in the Collection show S.S. Casino underway in heavy sea off Point Lonsdale, another two photographs show her at the Port of Warrnambool, leaving from the Breakwater in Lady Bay and another identifies the S.S. Casino as a ship from the Belfast and Koroit Steam Navigation Company. (Belfast is the original name for the township of Port Fairy). This ship model is significant because of its association with the coastal trader S.S. Casino 1882-1932 and its significance to trade along Victoria's West Coast in the late 19th and early 20th century. The wreck of the S.S. Casino is considered an important part of Victorian and Australian cultural heritage and as such has been declared and protected as an Historic Shipwreck under State and Commonwealth Law in the Commonwealth Historic Shipwrecks Act (1976). Ship model SS Casino in glass fronted case with stained wood frame. Ship has both steam and sail. Background of lighthouse on cliff, sea and sky. Ship painted green, 3 flags flying. Details of ship painted in white across top frame of case. NOTE: Correct details for shipwreck is 10 July 1932, at Apollo BayPainted in white on wood across top of case "SS CASINO WRECKED AT APOLL BAY JUNE 10 10 LIVES LOST".flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, newcastle and hunter river steam navigation company, belfast and koroit steam navigation company, h. sautau and sons, s.s. casino, west coast trader s.s. casino, victorian coastal trader, captain boyd, captain w. robertson, captain chapman, captain middleton, apollo bay shipwreck, s.s. casino at lady bay warrnambool, ship model s.s. casino, saltau and osburne -
Tatura Irrigation & Wartime Camps Museum
Bowl, 1940's
Made by internee in Camp 3, TaturaHand turned wooden bowl. Varying shapes of wood grains incorporating a small circular base.bowl, frank b, wood, camp 3, tatura, ww2 camp 3, hancrafts, woodwork -
Mont De Lancey
Tool - Cooper's Shave, Unknown
Used in the late 19th century.A steel curved bladed woodworking tool with two wooden handles used to scrape logs or circular pieces of of wood. It was used in the late 19th Century.woodcarving tools, shaves, handtools, steel, wood, woodworking tools -
Queenscliffe Maritime Museum
Drawing - Robert 'Curley' Wood, Pencil drawing, Dr Mike Birrell, 1996
Robert 'Curley' Wood was born in Yarram in 1949 and fished from 1962 to 1990 on a 23 foot huon pine boat 'Whykickamoocow'Framed pencil drawing of prominent Queenscliff fisherman Robert 'Curley' Wood. One of a series of 10 drawings entitled 'The Old Salts''whykickamoocow', robert 'curley wood', queenscliff, couta fishing -
Marysville & District Historical Society
Photograph (Item) - Black and white photograph, Official Opening of MARYSVILLE to WOODSPOINT RD 5th Feb, 1923, 05-02-1924
An early black and white photograph which was taken after the ceremonial re-opening of the Marysville-Wood's Point Road in 1924. The date of 1923 on the photograph is incorrect.An early black and white photograph which was taken after the ceremonial re-opening of the Marysville-Wood's Point Road in 1924. The date of 1923 on the photograph is incorrect. The Marysville-Woods Point Road was originally part of the Yarra Track, constructed in the early 1860s to provide access between Healesville and the Woods Point Goldfields. Despite the steep terrain and engineering difficulties, the Yarra Track soon became a busy route used by pack horses, horse-drawn drays, and wagons. Today this sealed mountain road is a popular scenic drive between Marysville and Warburton.Official Opening of/ MARYSVILLE to WOODSPOINT RD/ 5th Feb, 1923marysville-wood's point road, marysville, wood's point goldfields, healesville, yarra track, warburton, the argus -
Kiewa Valley Historical Society
Blacksmith's Bellows
In the Middle Ages double-acting bellows was introduced. It had 2 parts, one operated by hand or foot, the other took air from it and was weighted so it forced air out while the part was filling. Blacksmithing is the shaping of hot iron and steel, usually by hammering. Very hot fires were produced by 1.a hot air blast. 2. burning charcoal (not wood). Bellows were used to make tools, fix equipment including machinery, drays, carriages, harnesses etc. Farmers in the Kiewa Valley often had their blacksmith forge. They made their own tools, were able to mend equipment, drays etc., gates, and most items that were made of iron and steel.Large Double Acting bellow with wooden top and bottom, shaped like a 'water drop' - narrow at one end and broad at the other. The wood is held by strips of wood and leather bound and placed around the perimeter. The wood on the top side has inscriptions (illegible). The wood on the bottom side has a rectangular hole. The narrow end feeds into a pipe to enable the fire to receive a hot blast of air. When the bellow is squeezed it allows both pieces of wood to be pushed together.Illegibleblackmiths, bellows, double acting bellow -
Upper Yarra Museum
Gaming Accessory, Untitled, 1890 (estimated)
This Dice holder from the Woods Point goldfields would have been used to while away the time in the evenings, and the odd moments of time off during the day, children may have had use of it also, but would have had to be very careful not to lose the dice , because they would have been in big, big trouble. if the dice was lost !This item is of some significance because of its rareity and oral history passed on with the Item.Leather Dice Holder and Dice mounted on wooden base, leather dice holder is original. dice and wooden base is a mock up.(there is a small hole in the leather pouch 1.5cm from the bottom 2.5cm from the base, the hole is .2cm in size )W F Pickersgill Warburton 1960, Woods Point Gold Field circa 1890 app. Donated by Susan Issacs.recreation, leather, dice, dice holder, game, woods point, w f, pickersgill, mrs isaacs, mrs susan isaacs, yarra junction, gold field, game accessory gambling -
Kew Historical Society Inc
Equipment, Wash Board, 20th Century
A washboard is a tool designed for hand washing clothing. The traditional washboard was usually constructed with a rectangular wooden frame in which are mounted a series of ridges or corrugations for the clothing to be rubbed upon. In the 19th-century, the ridges were often of wood; by the 20th-century, ridges of metal were more common. Later examples substituted corrugated glass of plastic for the metal.A domestic glass and wood wash board designed for use with a wash tub. laundry equipment, wash boards -
Kew Historical Society Inc
Equipment, Wash Board, 20th Century
A washboard is a tool designed for hand washing clothing. The traditional washboard was usually constructed with a rectangular wooden frame in which are mounted a series of ridges or corrugations for the clothing to be rubbed upon. In the 19th-century, the ridges were often of wood; by the 20th-century, ridges of metal were more common. Later examples substituted corrugated glass of plastic for the metal.A domestic glass and wood wash board designed for use with a wash tub. laundry equipment, wash boards -
Kiewa Valley Historical Society
Woodworking Tool - Marking Guage
Very old. Made of wood possibly beech wood.Used by carpenters and/or cabinet makers living in the Kiewa Valley.Wooden scribe - marking tool. A marking gauge is a measuring tool used in woodworking projects. It is ideal for marking out lines or scribing on various surfaces before sawing, chiseling, or cutting. Most models have a radius bottom edge ideal for sliding along the wood being marked, making it an easy tool to use.woodworkers tool, marking guage, wooden scribe -
Tatura Irrigation & Wartime Camps Museum
Wood Plane, 1940's
Made by internee at Camp 3 and used there as a carpentry handtoolSolid wood plane with metal cutting plate. Center piece secured by a nailplane, wood, haering, m, messerle t, camp 3, tatura, ww2 camp 3, trades, carpentry -
Mt Dandenong & District Historical Society Inc.
Photograph
The photograph is most likely taken on Child's Road in Kalorama in the early 1900s.Black and white photograph mounted on dark green cardboard showing a woman on a road with a cart loaded with gathered wood htiched to a white goat. A dog is sitting at the roadside.childs road, kalorama, goat, wood collection, wood, cart -
Kiewa Valley Historical Society
Cartridge Box - B.L.Martin-Henry Arm
A box used to store and carry cartridges safely. It is protcted from moisture entering. Labelled with caliber, quantity and manufacturing date or lot number. The Martini-Henry is a single shot ricle with a lever action used in WWI.Sturdy rectangular wooden box with steel straps. At the top is a sliding opening with yellowish wood and printed black label."680 / Cartridges / Ball / b. L. Martini-Henry Arm / Mark V / R. L. " is printed in black on uellowish wood at the top centre of the box. More printing on the top each side "C & H' and "C?? / 19,2,75?"ammunition box, cartridge box, dederang rifle club -
Tatura Irrigation & Wartime Camps Museum
Tool - Handle, 1940's
Made by internee in Camp 3, Tatura workshopWood turned handle, polished, with metal end piece/shaft. Opening for inserting blade/chiselhandle, wood, bissinger g, wied g, camp 3, tatura, ww2, handcrafts, woodwork -
Flagstaff Hill Maritime Museum and Village
Tool - Smoothing Wood Plane Coffin Pattern, 18th to Early 19th Centuries
Being smaller than other bench planes, the coffin shaped smoothing plane is better able to work on smaller work pieces and around obstructions. Since the 1700s wooden smoothing planes have predominantly been 'coffin shaped' wider in the middle and slightly rounded making them more manoeuvrable. A vintage tool made by an unknown 18th or early 19th century woodworking tool maker. This item would have been made for individuals or cabinet makers that worked in wood and needed a tool that could produce a flat smooth finish to timber. These tools were used before routers and spindle moulders came into use in the late 19th and early 20th centuries before this time to produce either a decorative moulding or a smooth finish to furniture timber, door trims etc had to be accomplished using hand planing tools and in particular one of these types of planes. Traditionally wood planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding or had a flat blade use for achieving a flat and smooth finish to timber. The blade, or iron was likewise formed to the intended moulding profile or for smoothing and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and flat bladed planes for a full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. These vintage planes are well sought after by collectors of antique tools due to their rarity. A significant tool from the 18th to early 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber furniture item. Wood smoothing plane known as a coffin plane due to it's shape, wood insert screwed on front of base. Stamped "MILLER". Inscribed "X" (probably the size)flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cabinet makers tools, woodworking tools, wood plane, smoothing plane, timber finishing, furniture manufacture -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Functional object - Travel Trunk ,wood, brass handles, hinges and lock c1860
A handmade wood travel trunk, with internal cupboard fastened by wing clips, side brass handles, brass hinges and a central brass lock with latch for padlock Early settlers used these handmade trunks to bring their worldly goods to the new Settlements in Australia c1850A typical travel trunk used by pioneer settlers as they traveled on sailing ships from Europe to Australia c 1852A Handmade wood Travel Trunk , with internal cupboard, brass handles, lock and hinges c 1860NILpioneers, moorabbin shire, dendy's special survey 1842 brighto, dendy henry, were j.b., moorabbin roads board, market gardeners, early settlers, bent thomas, sailing ships, emigration to melbourne 1850, methodist church, henry box, holloway josiah, box willian, poultry farmers, flower farms, orchards -
Marysville & District Historical Society
Postcard (item) - Black and white postcard, Valentine Publishing Co. Pty. Ltd, Entrance to Marysville V.11, 1923-1963
An early black and white photograph of the Marysville-Wood's Point Road at the corner with Murchison Street in Marysville in Victoria.An early black and white photograph of the Marysville-Wood's Point Road at the corner with Murchison Street in Marysville in Victoria. This postcard was published by the Valentine Publishing Co. Pty. Ltd. as a souvenir of Marysville.VALENTINE'S/ POST CARD/ A GENUINE PHOTOGRAPHmarysville, victoria, postcard, valentine publishing co, souvenir, murchison street, marysville-wood's point road -
Unions Ballarat
'A bit of a rebel' : the life and work of George Arnold Wood, Crawford, RM, 1975
George Arnold Wood (1865-1928) was an historian who founded the Australian Anti-War League in 1902 with W.A. Holman and others. He also co-founded the Teachers' Guild of NSW. Biographical. Significant to the history of the Boer War, Teachers' Guild of NSW and Wood's research into Australian history.Paper; book. Front cover: orange background; black and white caricature of George Arnold Wood on the front; black text.Front cover: author's name and title.george arnold wood, historians, australian anti-war league, w.a. holman, teachers' guild of nsw, btlc, ballarat trades hall, ballarat trades and labour council, boer war, australian history, crawford, raymond maxwell, crawford, rm -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Buildings, Shingles Original Cottage c1850, c1850
The original small, pioneer cottage was built in the late 1840s to early1850s, by an unknown pioneer. It was located on part of a 30 Acre allotment that was originally part of Henry Dendy’s 'Special Survey Brighton' granted in 1841 (5120acres). There is a small display of external cladding shingles from the original pioneer cottage. Wooden shingles were usually thin (3⁄8 to 3⁄4 in or 10 to 19 mm), relatively narrow (3 to 8 in or 76 to 203 mm), of varying length (14 to 36 in or 360 to 910 mm), and almost always planed smooth. The traditional method for making wooden shingles was to rive - hand split - them from straight-grained knot-free sections of logs pre-cut to the desired length known as bolts. These bolts were quartered or split into wedges. A mallet and axe were used to split out thin pieces of wood. The wood species varied according to available local woods, but only the more durable inner section of the log was usually used. The softer sapwood generally was not used because it deteriorated quickly. Because hand-split shingles were somewhat irregular along the split surface, it was necessary to dress or plane the shingles to make them fit evenly on the roof. This reworking was necessary to provide a tight-fitting roof over typically open shingle lath or sheathing boards. These are the original shingles found on Box Cottage by L Lewis 1970 and used in the reconstruction in 19843 x wood Shingles used on roof of Box Cottage c 1850box cottage museum ormond, henry dendy special survey brighton 1841, brighton, moorabbin shire, parish of moorabbin, county of bourke,cottages, pioneers, ormond, colonial, mckinnon, dendy henry, box william, box elizabeth, reitman william, convicts, lewis timber co. ltd., deam h, museums, box alonzo, smith a, -
Wangaratta Historical Society
Wooden Fruit Bowl, Red Gum Bowl
This wood is made from Red River Gum tree wood, these trees live for between 500 to 1,000 years of age. The wood in this bowl has been carbon dated in the USA to be 4,500 years old.This bowl is significant because of the age of the wood it is made from. 000016 Wooden Fruit Bowl The timber this fruit bowl was made from was a red gum tree taken from the Ovens river at Tarrawingee (12 km from Wangaratta)where it had been submerged for years. It was made on a lathe by Ken Hill. The bowl warped and cracked shortly after being turned. A piece of the wood was taken to the USA by a visitor where it was carbon dated to be 4500 years old Measurements: Diameter: 22cm Height: 6cm Colour: Dark red brown Photographed beside a piece of natural red gum Tarrawingee is 12 Km North East of Wangaratta on the Great Alpine Road Significance: 4500 year old red gum wood is rare in this area. red river gum wooden bowl wangaratta historical society -
Tatura Irrigation & Wartime Camps Museum
Wood Plane, 1940's
Made by internee at Camp3, Tatura and used there as a carpentry handtoolHandmade dark brown solid wood, polished plane with metal cuting plate and studplane, wood, haering, m, messerle t, camp 3, tatura, ww2 camp 3, trades, carpentry -
Tatura Irrigation & Wartime Camps Museum
Functional object - Tray, c1940
made in Camp 3 by internees with wood from wood heapOrnate carved edged wooden rectangular tray.TATURA tray, camp 3, wood, tatura, o'toole, ivy, domestic, trays, food, drink, consumption, handcrafts, carving -
Tatura Irrigation & Wartime Camps Museum
Wooden Handle
Made & used by internees at camp 3, tatura material was selected from the fire wood.Turned wooden handle with metal rim & rink & hole( for inserting blade/metal tool) Handle is shaped near to the metal ring/rim, slightly darker wood section at bottomtatura, trades, tools -
Flagstaff Hill Maritime Museum and Village
Domestic object - Bread Board
In the high tech, fast paced society that we live in, it’s easy to take some things for granted. Case in point: the wood cutting board on which you’ll probably be preparing the evening’s dinner. Have you ever taken the time to think about the history of the cutting board? Where did it come from, and what did ancient civilizations use to cut their meats, fruits and vegetables? Wood throughout the ages Since the dawn of time, wood has been one of the most available materials used by mankind to build tools and lodgings, so it’s not really surprising to know that wood has been used in the preparation of food since the prehistoric ages. Of course, back then, cavemen probably used an unpolished slab of tree trunk to cut the kill of the day on and they probably didn’t think twice about saving it once the meal was over. Chances are they probably threw it in the fire with the rest of the wood needed to kindle it. Advances in technology Throughout the centuries, mankind evolved and started creating machines from steam, electricity and metal. When the circular saw was invented, nicer, cleaner slabs of wood were cut and used as cutting boards. Since soft wood was the most available type of wood at the time, it was the material of choice for to be used for cutting boards. Boards were made smaller since the slab of wood could now be cut to any desired size. Since they were made smaller, they were also used to eat off of and some people referred to them as trenchers. Trenchers were originally pieces of stale hard bread that were used as substitute plates. Wood trenchers quickly became the replacements of the eatable dinnerware. The butcher block: the cutting board’s larger cousin In the industrial ages, many industries rapidly developed, and the butchery industry followed this trend as well. Before the invention of the cutting board, butchers used tree rounds to carve their meat on. The rounds were often too soft and they rapidly became unsanitary. Hard maple wood butcher blocks were the preferred choice of the industry. They were made to be extremely thick and durable, so durable in fact, that a butcher could use the same block for almost his entire career. Cutting boards around the world As cutting boards began to be more and more used in kitchens around North America, the rest of the world crafted such boards from different materials. The East used thick bamboo as their material of choice. Despite its frail appearance, bamboo is quite strong and made durable cutting boards and butcher blocks. Europe used maple in the crafting of their cutting boards while Persia used flat pieces of polished wood in their kitchens. The world then saw cutting boards that were being made from other materials like plastic and they came in all shapes and sizes, but they always served the same purpose, to provide a household with a safe, clean surface on which to prepare meals for their friends and family members. https://www.woodcuttingboards.com/news/quick-history-of-the-cutting-board-47.aspxThe bread board is an example of kitchen equipment used during Victorian times and similar to those used today.Bread board. Wooden, octagonal, plain sanded light wood. Has decoration around edge and indented circular line to delineate round cutting board section.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bread board, cutting board, pastry board, kitchen utensil, kitchen equipment, baking equipment, food preparation -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tool - Tenon Saw 20thC, 20thC
This small fine-toothed saw with a strong back, used especially for cutting tenons on hard and soft woods, usually a Tenon saw will have between 10 and 14 teeth per 2.5cm (inch), this allows more control over the depth and direction of the cut. Among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This tenon saw is typical of the type used by early settlers in Moorabbin Shire 20th CA small fine-toothed steel saw with a strong back and wood handle, used esp for cutting tenons - fitted pieces of wood to insert into a cavity.saws, tenon saws, early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd, -
Whitehorse Historical Society Inc.
Document, 55 choice building blocks, 1935
Copy of advertisement for auction of land in Francis Street Blackburn and Whitehorse Road on Saturday 2 November 1935.Copy of advertisement for auction of land in Francis Street Blackburn and Whitehorse Road on Saturday 2 November 1935. F. G. Wood & Co, Auctioneer. Local Agent: G. C. KarnaghanCopy of advertisement for auction of land in Francis Street Blackburn and Whitehorse Road on Saturday 2 November 1935. whitehorse road, blackburn, francis street blackburn, g. c. karnaghan, f. g. woods & co.