This specimen was recovered from Moonambel, Donkey Hill, Victoria. Established in the early 1860's, Moonambel is a small town in the Pyrenees region of the Australian state of Victoria. In the 1850s the location of Moonambel was part of the ‘Mountain Creek’ pastoral run, but in 1860 reports began to appear of a gold-rush at McKinnon’s ‘Mountain Creek’ station. By 1861, a township had developed on the diggings site, and on 21 October 1861 the “municipal district of Moonambel, on Mountain Creek” was proclaimed. The name 'Moonambel' is believed to be an aboriginal word meaning 'hollow in the hills'. Slate is a stone with a fine grain that is noted for its persistent strength and ability to naturally split into slabs. It forms under low temperatures and is most often created from clay. Pyrite is a crystallising compound that occurs naturally in grey and blue-black slate that is colloquially referred to as slate-rust as it resembles regular rust. This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.Pyrite is iron sulphide (also known as “fool's gold”) which is commonly found in slates.Existing label: 53 /moonambel, slate, pyrite, burke museum, beechworth, indigo shire, beechworth museum, geological, geological specimen, mineralogy, victoria

This item was used as a seal (stamp) on official Shire Council documents. The coat of arms of the Shire of Orbost was designed in the form of a cross in which five stars are depicted on a shield. A small crown above the cross indicates the loyalty of the president,councillors and ratepayers to the reigning monarch. The inner section of the shield contains 4 figures, a sheaf of wheat, a factory, a co and a ship - all representing the activities of agriculture, fishing,industry and dairying undertaken in the shire. Originally part of the Bairnsdale district, Orbost split away as part of the Tambo Shire in 1882, and became a shire in its own right as the Shire of Croajingolong on 30th May,1892. The name was changed to the Shire of Orbost on 17th February, 1893. The Orbost Shire Council was abolished on 2nd December, 1994 as part of a state-wide program of local government reform to become part of the newly constituted East Gippsland Shire council.Local governments play an important role in the lives of citizens in Australia. Local government authorities exist to provide services and amenities to local communities, and are also responsible for regulating and providing services for land and property in their district. This item is representative of a time when Orbost had its own Shire Council.The former Orbost Shire Council Seal (stamp) depicting the coat of arms. The circular seal is brass and has a wooden handle with a bulb shaped top.President, Councillors and Ratepayers of the Shire of Orbost-1892orbost orbost-shire-council government history seal

This booklet was compiled for the anniversary celebrations of the Orbost Municipal Band on November 8, 1975. It was compiled by Peter Fagg who worked as a scientist with the Department of Sustainability and Environment (now DELWP) to study dieback in eucalypts. He specialised in the silviculture of the eucalypt forest types of South-East Australia for most of his 40-year career, which started with the Forests Commission Victoria. He was in Orbost from 1968 - 1973. The first Orbost Brass Band was formed in 1889. Around 1908 the town band split and the Orbost Workers' Band was formed. Eventually the two bands merged in 1913 to reform as the Orbost Municipal Band under conductorship of Charles Spink. The band continued for many years but was later disbanded and again reformed. This was to happen a number of times, the last time being in 1961 and continuing through to the late 1970's. Further info and Ref: In Times Gone By - Deborah HallThe various Orbost bands over the years played a major role in community activities providing entertainment and musical experiences for the many members.A 12 pp stapled booklet compiled for the anniversary celebration of the Orbost Municipal Band. It has been typed in black ink on foolscap sized white paper.orbost-municipal-band music-orbost fagg-peter

Mr E. Knight was the president of the Orbost Municipal Band from 1972 - 1978. The photographer, Peter Fagg, worked as a scientist with the Department of Sustainability and Environment (now DELWP) to study dieback in eucalypts. He specialised in the silviculture of the eucalypt forest types of South-East Australia for most of his 40-year career, which started with the Forests Commission Victoria. He was in Orbost from 1968 - 1973. The first Orbost Brass Band was formed in 1889. Around 1908 the town band split and the Orbost Workers' Band was formed. Eventually the two bands merged in 1913 to reform as the Orbost Municipal Band under conductorship of Charles Spink. The band continued for many years but was later disbanded and again reformed. This was to happen a number of times, the last time being in 1961 and continuing through to the late 1970's. Further info and Ref: In Times Gone By - Deborah Hall The various Orbost bands over the years played a major role in community activities providing entertainment and musical experiences for the many members.A coloured photograph of a man in a band uniform holding a brass instrument ( a french horn?). It is under glass framed in a white and gold wooden frame.on back - ".....E. Knight.......Dec 1978"music recreation orbost-municipal-band knight-g.

This ledger contains summaries of trading finances for Swintons Pty Ltd and Swintons Supermarket for the years 1969 to 1978. William and Ann Swinton migrated to Australia in 1854 and for a decade William Swinton worked as a builder and carpenter in the Warrnambool district erecting many buildings including the Wangoom Presbyterian Church. In 1865 he opened a store in Timor Street selling groceries, china, glass and hardware. By 1888 the business was known as William Swinton and Sons. Branch stores were opened in Cudgee, Nullawarre, Wangoom, West Warrnambool and South Warrnambool. When William Swinton died his son Robert became the first managing director of Swintons Pty Ltd. In 1934 the business split, with George Swinton and Sons selling furnishings, clothing and glassware and Swintons Pty Ltd selling seeds, hardware and produce. Today the Swinton family still operates a furniture and bedding business in Timor Street. This ledger is of great interest as it contains summaries of the financial records of the Swintons Supermarket and Swintons Pty Ltd from 1969 to 1978. It will be very useful to researchers. The current Swinton business in Timor Street is the oldest family business in Warrnambool and, with the Swinton name associated with businesses in Timor Street for 152 years, it is one of the oldest family businesses in Australia. This is a hard cover book with a green cover. There is black printing on the spine and on the front cover. The pages are white with printed ruled blue lines and printed red and blue columns. The entries are handwritten in blue ink. There are two pages at the back with printed graph patterns.‘Collins Analysis Book 61 Series’swintons family, warrnambool, history of warrnambool

Over 1500 pottery firms have operated in Stoke-on-Trent since the early 1700's Some lasted only a few years and some for well over 200 years. Some potters built and owned their own works. Many others were tenants in works built by others and a succession of potters occupied the same works. It was also a common practice for a works to be split between two different pottery companies or for a larger manufacturer to let out a smaller section of his works to a potter who would make wares which were not of interest to the pot works owner. Some potters purchased 'blanks' from other manufacturers and put their own decoration on them some items have two back stamps some have no marks at all. This adds to the confusion and frustration of trying to trace details of a particular manufacturer such as the subject item.Item at this time appears to be an early example of British ironstone earthenware that could possibly be a Staffordshire piece but cannot be associated with an historical event, person or manufacturer, provenance is therefore unknown, as a result the subject item assessed as a collection asset given it was produced before 1950.Cheese dome round white ironstone, with flat base and a bell lid with ornate handle white Decorative relief floral design date letter "A" impressed in baseflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, ceramic dish, dish, kitchen ware, covered dish, ironstone cheese dome

Over 1500 pottery firms have operated in Stoke-on-Trent since the early 1700's - Some lasted only a few years and some for well over 200 years. Some potters built and owned their own works. Many others were tenants in works built by others and a succession of potters occupied the same works. It was also a common practice for a works to be split between two different pottery companies or for a larger manufacturer to let out a smaller section of his works to a potter who would make wares which were not of interest to the pot works owner. Some potters purchased 'blanks' from other manufacturers and put their own decoration on them some items have two back stamps some have no marks at all. This adds to the confusion and frustration of trying to trace details of a particular manufacturer such as the subject item.A mid to late 19th century ironstone jug with no makers markings only a date letter therefore at this time cannot be associated with an historical event, person or place, provenance regards maker is unknown, item assessed as a collection asset given it was produced before 1950.Jug, white Earthenware with leaf decoration around the base, handle and lip.Letter "E" date mark for 1881flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, ceramic jug, drink ware, kitchen ware, table ware, ceramic, pottery, milk jug, cream jug, ironstone jug

Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University AustraliaThis woven band of dark blue has two narrow bands of gold on either side. It has a 4cm turn back at the end, which is held by a folded and stitched piece of the same band placed at ninety degrees around the band. school of mines ballarat, hat band, uniform, costume, textiles

Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University AustraliaThese circular cuff links are the Coat of Arms of the School of Mines Ballarat and are made of sterling silver and white, yellow, green and blue enamel attached by three links to a small bar with dumb bells. On face - Ingenio Effodere Opesschool of mines ballarat, school crest, cuff links

Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University AustraliaThese Coat of Arms of the School of Mines Ballarat are circular lapel badges and are made of sterling silver and enamel. The circular disc is attached to a long pin. 1). The enamel is yellow, green and blue 2). The enamel is white, yellow, green and blueOn face - Ingenio Effodere Opesschool of mines ballarat, school crest, lapel pins

Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University Australia. Gold coloured School of Mines Ballarat brass badges with blue and green enameling. Box of 72 (8 are loose in the box but 64 are in individual packets).On face - Ballarat School of Mines, Ingenio Effodere Opes Stamped into back - Stokes Melbballarat school of mines, badge, stokes and sons, numismatics

Springmount Pottery is located in Creswick, Victoria, and produces and sells works designed by its owner, Tina Banitska, who also owns the Convent Gallery in Daylesford. Banitska came to Australia with her family from Greece in 1956. She trained at RMIT and Franklin State College, before taking over Doug Alexander's Springmount Pottery when he moved to Tharwa in 1976. Retaining the pottery name, she developed it as a workshop, employing throwers and decorators to make works to her design, and initially selling these through the Springmount Pottery Gallery on Main Street, Ballarat. The pottery now operates with its own gallery onsite. Banitska's initial interest in ash glazes is continued in the Pottery's ashware line and there has also been a wide range of other Springmount designs. Works are signed with a painted 'Springmount' often split over two lines.A hand thrown, glazed and decorated plate with attached bowl for dip.ceramics, springmount pottery, tina banitska, australian studio ceramics

An early attempt to catalogue Legacy memorabilia which refers to 33 boxes of items split into subject matter such as 'History of Legacy', 'Finance Committee', 'Junior Legacy', 'Shrine', Group and Branch histories, and photograph albums. No indication of when it was compiled or by whom though it is presumed to be the Archive committee that was established by Frank Doolan who collected a lot of the items in the archive cabinets. Uses a rudimentary system of cataloguing e.g. 'H1. Inauguration of Remembrance Club. Box 1', where 'H' refers to History. 'S' refers to Shrine. Includes three loose typed and handwritten sheets listing films and tapes. A high number of History documents (H1 - H63) are filed in Box 25 - 01475 onwards. Believed to be from the archive project in the early 1970s by L/ Frank Doolan and L/ Brian Armstrong. This item appears to have catalogued at 00507 as well. TBC.A valuable snapshot of records held before the 1990s when a building refurbishment led to the destruction of a considerable amount of material.Invicta Series 80 Account Book, feint lined, 167 numbered pages. Cover red plastic, gold embossed. Handwritten black on white label bottom righthand side of front cover. Pages pale blue with blue lines. Entries in blue or black ink, pencil."Legacy Archives Index" on front cover and first page.history, frank doolan

Springmount Pottery is located in Creswick, Victoria, and produces and sells works designed by its owner, Tina Banitska, who also owns the Convent Gallery in Daylesford. Banitska came to Australia with her family from Greece in 1956. She trained at RMIT and Franklin State College, before taking over Doug Alexander's Springmount Pottery when he moved to Tharwa in 1976. Retaining the pottery name, she developed it as a workshop, employing throwers and decorators to make works to her design, and initially selling these through the Springmount Pottery Gallery on Main Street, Ballarat. The pottery now operates with its own gallery onsite. Banitska's initial interest in ash glazes is continued in the Pottery's ashware line and there has also been a wide range of other Springmount designs. Works are signed with a painted 'Springmount' often split over two lines.A hand thrown, glazed and decorated vase.ceramics, springmount pottery, tina banitska, australian studio ceramics, australian studio pottery

3701.1 – English Electric Co. Ltd – “Specification for DK 29, 30, 31 and 32 Ventilated Traction Motors”, publication No. 288 – 4 pages. Includes motor performance chart for the DK 30B motor and 2 images of Ventilated traction motors, one box frame and one split frame type. Publication No. 223 and 224 respectively. 3701.2 – English Electric Co. Ltd – “Specification for ventilated traction motor DK34 – box frame for 24” or 27” car wheels”. Publication No. 263, March 1921 – 4 pages. Includes Two photographic images for this motor, showing complete motor and significant parts – publication numbers 283 and 284 respectively. Traction Motor curves for DK34A motor, publication No. 295..1 - has "40HP motor" in pencil in top right hand corner. .2 - ditto for "30HP motor"trams, tramways, english electric, specification, maintenance, motors

Uniform issued to Warrant Officer 2nd Class. "R. HOSKING", "ROYAL AUSTRALIAN ARMY CORP OF TRANSPORT".1. Jacket, khaki colour wool/polyester fabric. Service dress style with belt. Gold colour plastic buttons with shank and split ring. Buttons have raised emblem and letters - "Royal Australian Army Corp of Transport". Collar, shoulder epaulettes, four front pockets, top two with buttons and two metal press studs on flap, lower button down flap. Two lapel badges - metal, for Royal Australian Corps of Transport. Two rank insignia on sleeves - crown - Warrant Officer 2nd Class. Green colour polyester fabric lining with white cotton manufacturers label inside right. 2. Belt, khaki colour wool/polyester fabric with plastic buckle and leather belt keepers. Green plastic buttons.Manufacturers information on label - black ink print. 1. KEITH COURTNEAY PTY LTD/ VICTORIA/ 1978 1979/ ^/ NAME/ SERVICE NO" "HOSKING R.D." - handwritten black ink pen. "W/02 THOMAS R.J. type written black ink. " 4362/ 42R" Size label - handwritten black ink.uniform, army, service dress r, r. hosking

The artillery piece of the cannon was cast at the Low Moor foundry in England in 1861. It is a 68 pound muzzle loading cannon, capable of firing a 68 pound weight projectile. The arrow on the top of the barrel is the symbol of government ownership. It is probably one of the artillery pieces purchased by the Victorian government in response to the 1863 report by Captain Scratchley, which recommended 19 such artillery pieces be bought for the defence of Hobsons Bay, (Williamstown, Melbourne) (Billets p.12). It was possibly brought to Warrnambool in the late 1860s or the 1870s, to be used for training purposes by volunteers and local militia. The wrought iron runners were probably added to the slides at a later date. This model of carriage had been manufactured since 1855, and the traversing slide since 1860. The traversing slide of the wooden carriage absorbs the recoil when the gun is then returns to the gun to its original position for loading and re-firing. The properties of the timber (regarded as being Burmese teak) have helped to preserve these carriages in Australia. This particular carriage and traversing slide would have been manufactured about the same time as the gun (in 1861) in the Royal Carriage Department of the Royal Gun Factory in Woolwich, England. The gun would then have been assembled on the traversing slide of the carriage, then despatched as a unit. The wooden slide compressor mechanism that belongs to the cannon was used to limit the recoil when the cannon was fired. It is now stored separately for purposes of preservation. It is extremely rare, as it is the only one surviving in this group of South Western Victorian cannons.This 68 pdr cannon, mounted with its original wooden carriage, is part of the South Western Victoria collection of surviving 19th Century artillery pieces, item number W/F/02. It is rated as EXTREMELY RARE on a State, National and World level. The 68 pound smooth bore cannon of this period are not particularly rare either in Australia or overseas; its significance lies in its Victorian provenance and as an element in a major collection of 19th century cannon. The number of surviving carriages with traversing slides in this group in South Western Victoria is unique in Australia and probably in the World. Out of 10 such platforms surviving in Australia, the South Western Victorian group has half. Several survive around the world but probably not in such a large group. The wooden sliding compressor mechanism belonging to this cannon is extremely rare, and the only one in this South Western Victorian group of Guns and Cannons. As a whole, this cannon has undergone very little restoration or modification, giving it a high level of integrity.Warrnambool Garrison Cannon. 68pdr smoothbore, muzzle-loading, cast-iron cannon. Manufactured in Low Moor, 1861, No. 10310. Mounted on the wooden carriage with wrought iron traversing slide and wrought iron runners and fittings. The cannon's Cascabel is cast with a loop. The wooden slide Compressor Mechanism, or Recoil Mechanism, is extremely rare. This mechanism comprises two equal-sized sections of wood, one on each side of the centre, joined by metal rods. In the centre of this wooden platform, with openings, top and bottom is a 15cm diameter metal cylinder with two cusps on the edge of the top (this wood has split over time). Two parallel sides each have two 1cm thick metal "L' plates attached 15cm long and 8.5cm wide. With the unit is ‘ L’ bracket, curved bracket and bolt head.Cannon trunnion "LOW MOOR / 10310 / 1861" Top of the barrel "7045, (symbol of an arrow pointing up), 95 – 3 – 14, 1861, 209" Cascabel "CV / N / C" The rear of left-hand slide " "OD” “JW” “No 33” Side chock – “JW” twice. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, muzzle loading cannon, 68 pound cannon, low moor foundry, royal gun factory, warrnambool militia, warrnambool garrison volunteers, warrnambool fortifications, wooden sliding compression mechanism, carriage and traversing slide, 19th century cannon, traversing platform, garrison sliding carriage, 68 pounder

Part of a collection of items donated by Mrs Robyn Adams. Mrs Adams' father, Victor Clyde, was a wool grower who owned and used all of the items donated.Light pale blue/green lined paper page. Top part of page has typed black ink describing instructions on how to fill in lined section below, beneath headings reading -GOLSBROUGH, MORT & COMPANY LTD, MELBOUNRE- and -OWNER'S OR CLASSER'S SPECIFICATION OF WOOL CLIP-. Lower two-thirds of page is bordered with pink lines and split into six coloumns under headings. Fields can be filled in with information about wool lip/size/wiehgt/quality/bale stencil number/etc. Reverse of page is the same. Page has one vertical fold line in the centre and three horizontal fold lines. There is a dark blue line on the front and matching larger stain on the back, most likely from a carbon copy paper.elder smith goldsbrough mort limited, waybill, wool sales, wool clip, mrs robyn adams

Black and white photograph of Jacqui Edwards and Bob Prentice looking at the roof of the Horse Tram No. 1 in the depot. Roof has been split from the tram and is sitting on trestles. Photo used in document to seek funds from sponsors. See Reg. Item No. 1159. Photo taken early 1986 by Richard Gilbert. Jan. 93 Fares Please! has part of the photograph, following the passing of Bob Prentice. Photo is dated 1987, but May 86 Fares Please! report on the submission being prepared and sent out. May 1986 issue of Fares Please! notes the positioning of a donation box to gather donations. This box is in the photograph. Has W4 671 in the background. On Kodak paper. High Res image added 20-8-2016. See May 1986 Fares Please!trams, tramways, horse trams, btps, depot, tram 1

This dress is believed to have been worn on the Goldfields of Victoria. The discovery of gold in Victoria ranged between 1851-1879. This dress is believed to have been worn on the Goldfields of Victoria. There are few remaining examples of clothing worn on the Victorian goldfields.A circa 1878 two piece dress consisting of bodice (.1) and skirt (.2). The eau de nil (green) corded silk dress features a high round neckline that secures with hook and eye fastenings and decorative buttons through the length of the princess line bodice to the band around the hem. A watch pocket sits just below the waistline on the left hip. The three-quarter sleeves are narrow with kilted pleat trim on the lower edge and decorative buttons. At the back of the dress is asymmetric in its cut. The dress splits along the right hand side and finishes shorter with pleating and has a decorative pocket. A bow sits at the top of the split. The underskirt fastens on the left hip and features kilted pleats along the base of the skirt and train. The train features additional fullness created by a section of gathering in the centre.victorian goldfields, asymetrical victorian dress, princess line, 1870s fashion

Pamphlet - printed onto an A4 sheet, titled "Sacked" about a MMTB Conductor, No. 3345, John Harrington, asking people who received this pamphlet to write to the Board to have him reinstated. Gives the details of his viewpoints and the action of the Disciplinary Panel. Dated 1-8-1979. The Union Industrial Officer Gordon Bell recommended that he resign. See note in the pdf file from donor - "Item 3 John Harrington - he printed 2000 of these pamphlets and distributed them on Kew Depot trams and Preston Depot trams. He split the union down the middle and resulted in Gordon Bell resigning and Jim Harper becoming Industrial Officer. John Harrington was reinstated as a cleaner at Malvern and later resigned over an issue sanding trams.trams, tramways, mmtb, unions, discipline

Model tram - B or B1, number 2002 made by The Met for their model tram at the Royal Show Melbourne c1985. Consists of: 1 - 2 x Fibreglass sections - one with a pantograph, painted in The Met colours with number 2002 with destination of "Special". Pantograph made from wire. 2 - small articulated section made from fibre glass and black vinyl, painted yellow and green. 3 - two sets of heavy duty electric motor, geared to two sets of four wheel bogies and one unmotorised bogie with a centre pins, washer and split pin that secured the articulated section of the tram. Each set number on side "MTA No. 7A and 9B" Made from brass, steel, plastic - purpose made. Placed with two sections of O gauge track - each 340mm long.trams, tramways, models, b class, the met, royal show

This item is believed to have been made in or around the Staffordshire area in the United Kingdom. Over 1500 pottery firms have operated in Stoke-on-Trent since the early 1700's - Some lasted only a few years and some for well over 200 years. Some potters built and owned their own works. Many others were tenants in works built by others and a succession of potters occupied the same works. It was also a common practice for a works to be split between two different pottery companies or for a larger manufacturer to let out a smaller section of his works to a potter who would make wares which were not of interest to the pot works owner. Some potters purchased 'blanks' from other manufacturers and put their own decoration on them some items have two back stamps some have no marks at all. This adds to the confusion and frustration of trying to trace details of a particular manufacturer such as the subject item.A mass produced utilitarian item made for domestic use, no history or manufacturing provenance currently available. At this time the item cannot be associated with an historical event, person or place, provenance is unknown.Serving dish white ironstone raised pattern of bows around the top.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village