This ACME portable clothes wringer could be attached to a wash trough or hand washing machine to remove excess water from the washing. It was much less cumbersome that the earlier Mangles used for this purposeMost homes of 20th C in City of Moorabbin would have had one of these ACME wringers . It greatly eased the washday burden of the women. The Exchange Hotel Nepean Highway Cheltenham was a well established meeting place for Moorabbin Shire settlers by 1915A metal clothes wringer with side hand crank and 2 rollers that could be attached by screw clamps to a wash trough or washing machine for removing excess water from washing. The pressure of 2 rollers was controlled by a screw on the top of machine that could be loosened or tightened according to the material being passed through.ACME 14 INCH / on hand crank is list of patents for Great Britain, USA, Aust. NZ, Germany, Belgium, Sweden moorabbin, bentleigh, cheltenham, laundry equipment, washing, washing mangles, washing machines

Horse driven Mining Whim used to raise and lower cages containing men and dirt up and down the shaft. The rope winds around the drum and is attached to a pulley over the shaft then goes down the shaft.Wooden Barrel of whim over round track with horse at front. Whim raises and lowers kibbles of dirt or cages of men up and down shaft. Four men standing in picture looking at camera. Shaft is on right of photo.stawell

Kralcopic Pty Ltd, was a subsidiary of Bendigo-based company GBM Gold and had previously held mining licences around Bendigo, which incorporated sites including Kangaroo Flat, New Moon, Eaglehawk and the associated Woodvale Evaporation Ponds Complex. In August 2019, the Earth Resources Regulator decided not to renew Kralcopic’s three mining licences, due to the company’s inability to provide surety that it could finance its mining activities and site rehabilitation obligations. In October 2020, the company filed legal proceedings in the Supreme Court challenging the decision not to renew these licences. The Supreme Court later upheld the regulator’s decision not to renew the licences. On 23 April 2021, the Federal Court of Australia appointed KPMG as Kralcopic’s liquidators. On 14 May 2021, the liquidator lodged papers with the Australian Securities and Investment Commission (ASIC) to disclaim Kralcopic’s freehold land at Woodvale and parcels of land around the company’s former Bendigo sites, with the land to subsequently become Crown land. The Earth Resources Regulator has put a statutory exemption in place to preclude new mining licence applications on the sites while we undertake rehabilitation. The exemption also provides an opportunity for government to consider future uses of the sites in consultation with the City of Greater Bendigo and the local community. The Earth Resources Regulator holds rehabilitation bonds totalling $5.9 million, which it will use to rehabilitate the former sites.Colour photocopy of original photo. Image shows Catherine Reef South shaft with rectangular concrete capping. Ventilation pipe in concrete capping. On back in pencil: Catherine Reef South shaft with cap - Kralcopicwestern mining corporation, goldmining, capping, shaft, mining regulations, williams united shaft, kralcopic

Vintage wooden shaft, metal undercarriage race sulky. Used by the Conway family from Hopetoun.A good example of wooden shafted sulkies used in trotting races before being banned for safety reasons.Royal Speed, hickory shafted race sulky in yellow and purple. Chromed metal undercarriage, hickory shafts, metal fittings.Wire spoked wheels with rubber inflatable tyres.Royal Speed, D Conway.trotting, sulky, royal speed, brown brothers adelaide, danny conway, ross conway, copper satin

Circa late 1800's to early 1900s. A horse-drawn furrow plough was the most common type of agricultural implement used by the pioneer market gardeners, in Moorabbin Shire, of the 1800s and continued on into the 1940s when motorised tractors came into use. This plough is an example of a single-mullboard plough which would have been pulled by horse. The long handle was used to lower the silver plate, (mullboard), to the chosen depth of soil. Following 'Dendy's Special Survey' of 1841 and the Crown Land Sale in 1852, land allotments were bought by pioneer settlers who established or rented allotments for market gardens in the area and they supplied produce to the markets in St Kilda and Melbourne. During the gold-rush of the 1850s the rapidly increasing population of Melbourne saw a huge demand and a rise in prices for all foodstuffs, including the vegetables and fruit grown in the Shire of Moorabbin. An "Oliver" single mull-board plough in good condition with faded manufactures markings on shaftsPainted on shaft "MANF'D BY/OLIVER CHILLED PLOW WORKS/Southend Ind. USA/" Engraved on blade " 13 OLIVER"brighton, moorabbin, plough, dendy henry, east bentleigh, market gardens, horse drawn plough, plow, mullboard

Interior view of showing machinery at Foster Valley Mill. Shows a wall mounted drive shaft which runs the machinery.Drive shaft for textile machinery within the Valley Mill.T. Lockwood Lockwood / GEELONGtextile mills - operation, valley worsted mill

Eduard Lehman, Zurich Switzerland patented a metal barrel shaped hand washing machine with a hand crank to operate a metal plunger in 1919. Such hand washing machines were used by settlers in Moorabbin Shire An 83 year old Visitor on site remembers using this type of washing machine. He had to push the agitator for 5 minutes. Prior to his mother buying the washer, all laundry was hand washed in troughs.Such hand washing machines greatly reduced the workload of the women of pioneer familes in Moorabbin ShireThis hand washing machine c1919 consists of a metal barrel, standing on 4 legs, and has a hand crank to operate a cone shaped metal agitator.THE / LEHMAN/ COMPRESSED AIR AND / VACUUM WASHING MACHINE / Pat. No. 50614/30lehman eduard, hand washing machines, laundry equipment, pioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham

This scale model of a mining plant was made by Donald Douglas Mather of Talbot. The engine shed houses the winches, which raise and lower the cages carrying the workmen. The winches also control the water-Baling tanks, which are lowered into the pump shaft to clean the water. The Pump Shaft is part of the main shaft partitioned off for keeping the water down. The old style plant (or cas commonly known poppet legs), were all of timber construction and, when erected, straddled the main shaft. This scale model allows for steel construction, and is set over the shaft to permit an unobstructed view of the operations. The Bad level is where the workmen enter and leave the shaft. The staging platform on the first level is where the trucks and mullock or other material are wheeled out on rails and then tipped to form the mine dump. The top level is to allow for maintenance of plant. Donald Douglas Mather of Talbot worked in mines in Ballarat, and made the model of the poppet head. The poppet head is a replica of those used at many mines in Ballarat. Back in the 1850s Ballarat was a god rush town and many mining claims were made and poppet heads built this is a replica of those poppet heads which are a part of Ballarat's Heritage and a full size poppet head is erected at Sovereign Hill Theme Park in Ballarat. Mining is a huge part of Ballarat's history.A timber poppet head and engine room model. "This scale model - the modern construction of a mining plant - was made by Mr Donald Douglas Mather* of Bonnie Doon, Talbot, Victoria. The engine shed houses the winches, which raise and lower the cages carrying the workmen. The winches also control the water-baling tanks, which are lowered into the pump shaft to clean the water. The pump shaft is part of the main shaft partitioned off for keeping the water down. The old style plant (or as commonly known poppet legs), were all of timber construction and, when erected, straddled the main shaft. this scale model allows for steel construction, ans is set over the shaft to permit an unobstructed view of the operations. The bad level is where the workmen enter and leave the shaft. The staging platform on the first level is where trucks ad mullock or other material are wheeled out on rails and then tipped to form the mine dump. The top level is to allow for maintenance of plant. * Mr Mater, previously of Ballarat, worked for many years as a miner and plant erector" (Old interpretive panel)mining, mather, mining plant, poppet head, engine house, model, donald douglas mather

Pen was probably last used in one of the schools in the Kiewa Valley. The plastic shaft suggests this pen was at the time when fountain pens started to emerge. The dip pen was becoming outdated and too slow for a faster pace of written communicationsHistorically and socially this form of written communication was becoming too slow for a faster pace of commerce and life. Circa 1950s onwards the level of the written word increased by the proportion of literacy among the populous in the Kiewa Valley Plastic shaft black coloured pen with metal nib (non drip). Nib is removable, fastened to shaft by strategically placed slotseducation, writing, literacy, ink well, school writing implements, pen, nib

Made and imported by Swedish company, Husqvarna, this machine was used to mince larger pieces of meat. The grinder was clamped securely to a table, and meat was then fed into the machine through the funnel at the top. The wooden crank handle was turned, moving the spiral grinding mechanism, and pushing the meat through the sieve-like fitting at the end. While hand mincers were ubiquitous in the late nineteenth and early twentieth-century kitchens, and was responsible for reducing food waste and promoting frugal ideals, the Husqvarna brand sold over 12 million worldwide.Hand operated mincing machine, larger than usual, with multi small holed attachment in place. Tin plating worn off top edge of bell. Plan wooden handle. Stamped with name, number, etc.HUSQVARNA 10 one side; also on attachment holder. RELIANCE/MADE IN SWEDEN + five pointed star on other side. "H" stamped on crank inside.husqvarna, mincer, hand, kitchen tool

A butter churn is a device used to convert cream into butter. This is done through a mechanical process, via a crank used to manually turn a rotating device inside the barrel shaped churn. The agitation of the cream, caused by the mechanical motion of the device, disrupts the milk fat. The membranes that surround the fats are broken down, subsequently forming clumps known as butter grains. These butter grains, during the process of churning, fuse with each other and form larger fat globules. Air bubbles are introduced into these fat globules via the continued mechanical action of the churn. The butter grains become more dense as fat globules attach to them while the air is forced out of the mixture. This process creates a liquid known as buttermilk. With constant churning, the fat globules eventually form solid butter and separate from the buttermilk. The buttermilk is then drained off and the butter is squeezed to eliminate excess liquid and to form it into a solid mass. Then rinsing could be done simply by washing in water, followed by draining, salting and working or "kneading" the butter with a pair of wooden butter pats, or with bare hands. This is a paddle churn, a barrel that contains a paddle, which is operated by a handle. The paddle churned the butter inside the container when the handle was turned. Early settlers had to be self sufficient, growing their own vegetables, making tools and clothing and usually had a house cow to produce their milk supplyThis domestic butter churn is an example of the skill of the pioneer craftsman, carpenters and tool makers c1900. As pioneers and early settlers had to be self sufficient they usually kept a dairy cow or 'house cow' to provide milk for drinking and for butter and cheese to made by the family.A small wooden, domestic butter churn with a lid and a crank that manually rotated the paddle inside. E. CHERRY / MAKER / GISBORNE / VICTORIA / Apioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham, dairy products. dairy farmers, milk, butter, dairies

In 1890 D. Babcock invented a test for measuring the amount of butter fat in milk, either on the farm or in the dairy or creamery. Samples of milk were put in the glass vial and then spun (by cranking the handle) causing the cream to separate from the non-fat milk thus determining the percentage of cream in the milk. The product was then priced accordingly.Dairy farming in the Kiewa Valley was the main industry with farmers keen to test the quality of their milk before selling it. This centrifuge enabled them to test the amount of milk and cream being produced by their herd. This '1903 Butter Fat Tester' made 100 turns per minute. Early hand crank centrifuge for measuring the butterfat content of milk in the farm dairy or creamery. It has 4 brass / copper removable canisters with glass vials and tubes that fit inside. The glass vials bulge at the bottom and are marked with measurements 1, 2 etc.Numbers on the glass vialsmilk and cream tester, dairy farming, centrifuge

Lakes Entrance Oil Shaft complex which was in production c 1943 to 1952 situated in low terrain north of the town between Myers Street and Palmers Road Lakes Entrance VictoriaBlack and white postcard of Lakes Entrance Oil Shaft complex Lakes Entrance Victoriaoil, exploration

Hand-cranked separating maching, made in Sweden for Melbourne Crown Separator Co. Pty Ltd. Machine is used for separating cream from milk, with the machine speed being 70 revs per minute.Separator machine. Hand-crank operated milk separator, small, painted red, Crown Separator Co Pty Ltd. Base and spinning mechanism only (mechanism spins very rettly). Stamped on handle "70 per minute", Stamped on body "S7071", Manufacturer plate "SYLVIA NO. 19/ MADE IN SWEDEN / CROWN SEPARATOR CO PTY LTD / 547 FLINDERS ST, MELBOURNE" Stamped on handle "70 per minute", Stamped on body "S7071", Manufacturer plate "SYLVIA NO. 19/ MADE IN SWEDEN / CROWN SEPARATOR CO PTY LTD / 547 FLINDERS ST, MELBOURNE" flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, milk separator, cream separator, dairy machinery, farming machinery, crown separator co pty ltd

Circa 1920s petrol driven cross saw. It was mainly used cross cutting felled logs The Land on which the Menzies Creek railway station and Museum are built on was once apart of James Hermon's & his son William Hermon's property on which this Drag Saw was used. reference : Jinkers and Whims: A Pictorial History of Timber-Getting By Jack BradshawHistoric - Industrial Timber working petrol driven cross saw - Drag SawLarge, mechanical saw mounted on a steel shaft connected to tin fuel and water containers. The machine has two large spoked wheels, a rotating Crankshaft and an extended arm/rod attached to a crank and flywheel.New Record puffing billy, drag saw, timber cutting, early mechanical equipment, james hermon & sons, menzies creek, 1920s

A 10cm round cylinder of wood on a 1.2cm round steel shaft, shaped into a 15 x 15cm crank handle. Both ends of the wood are banded with 2.5cm flat steel, fastened with bullet head nails

Item is a combination tool used for a M60 machine gun, standard Australian issue for Vietnam era (US made).Heavy metal tool, well used. Combination spanner- closed at one end and open at other, with additional tool attached. Has white painted patch probably done for purposes of user labelling object.On shaft: 279068m60, machine gun, spanner, combination tool, military equipment

8609.1 - Wooden crank telephone.- L. M. Ericsson & Co. - Stockholm.