Showing 80 items
matching electric lamp
-
City of Ballarat Libraries
Glass Slide, Ballarat Town Hall
Town Hall completed 1872. Thomas Moore statue erected 1889. No evidence of electric trams indicates the photograph is pre-1905.Previously unknown image of Ballarat. The set and its subjects indicate these images were produced to promote Ballarat and were perhaps aimed at tourists.Ballarat Town Hall, se corner Sturt and Armstrong Streets, image not dated. gas lamps, statue -
Ballarat Tramway Museum
Document - Photocopies, Public Records Office of Victoria, "The Electric Supply Company of Victoria Limited - Directors' Report" - ESCo Annual Reports - 1920 - 1934, 1994
Photocopies of the annual or Directors' reports for the Electric Supply Co. of Victoria Limited (ESCo) for the period 1920 to 1934. All dated 31 March 19xx. Gives details of the electricity and tramways departments such as the lamps connected and Balance Sheets. Some reports have a statutory declaration on the rear. Photocopies arranged by Alan Bradley c 1994 from files of Company Records held in the Public Records Office of Victoria. Item Year 1244.1 - 1920 1244.2 - 1921 1244.3 - 1922 1244.4 - 1923 1244.5 - 1924 1244.6 - 1925* 1244.7 - 1926* 1244.8 - 1927 1244.9 - 1928 1244.10 - 1929* 1244.11 - 1930* 1244.12 - 1931 1244.13 - 1932 1244.14 - 1933 1244.15 - 1934 * 4 pages, all others three. The fourth page gives the Statutory declaration of the agent of the Company lodging the copy of the English balance sheet in Victoria. Declaration by George Cole of Bendigo, or Percival John Pringle in Ballarat. Reports cover activities in both Ballarat and Bendigotrams, tramways, annual reports, esco, john pringle -
Ballarat Tramway Museum
Postcard, Valentine & Sons Publishing Co, "City Hall and Shoppers Square Ballarat", 1905
Printed colour postcard titled "City Hall and Shoppers Square Ballarat". Has an inbound tram showing the Grenville St sign on the rear, and one of the crossbench cars loading passengers outside the Town Hall. Shows Snows building, people in the median strip - busy holiday or a Sunday. Images of the front and back of the card and a close-up of the two trams in the bottom left-hand corner. Note the lamp or coloured destination sign on the roof of the inbound tram. On the rear, the postcard has been divided into two with the words "Post Card" and "Printed in Great Britain" on the top, a "Valentine Series" on the side. Addressed to Miss J Johnstone, 30 Weighbridge St, Flemington, and with the words "Dear Jeannie, / How do you like this one. / Maggie". Has a 1d Victorian stamp, cancelled in Melbourne "5" with the date "25-1-05" This is an incorrect date - electric trams did not open until August 1905. 2nd copy unused.Yields information about the intersection of Sturt and Armstrong StreetsPostcard, coloured, divided back - used.trams, tramways, sturt st, esco, town hall, cross bench tram, snows, armstrong st -
Ballarat Tramway Museum
Document - Photocopies, Alan Bradley, "The Electric Supply Company of Victoria Limited - Annual Reports", c1995
Set of A4 photocopies of 15 years of annual reports of The Electric Supply Company of Victoria Limited from 1920 to 1934. Most of the reports comprise three sheets - Directors Report, left hand side of the Balance Sheet, Trading Account and Profit and Loss Account on the right hand side. Some reports have a statutory declaration by the Manager and Secretary that the reports submitted are a true copy of the report. Items .1 to .12 detail the number of lamps connected, passengers carried and trading account for the last three years. This practice stopped when ESCo sold the company to the SEC but continued to manage it for a further four years. The Directors report from 9/1900 note the forthcoming sale of the company to the British Insulated Wire Company Limited and the problems of finalising the sale. Photocopies from the Public Records Office of Victoria, Company Reports, obtained by Alan Bradley c1995. All three sheets, unless noted otherwise. .1 - 1919 - 1920 .2 - 1920 - 1921 .3 - 1921 - 1922 .4 - 1922 - 1923 .5 - 1923 - 1924 .6 - 1924 - 1925 .7 - 1925 - 1926 - four sheets .8 - 1926 - 1927 .9 - 1927 - 1928 - four sheets .10 - 1928 - 1929 .11 - 1929 - 1930 .12 - 1930 - 1931 - four sheets .13 - 1931 - 1932 - four sheets .14 - 1932 - 1933 .15 - 1933 - 1934 Items separated by yellow coloured A4 sheets.trams, tramways, esco, british insulated wire company, annual reports, directors reports -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s, 11/07/1950 12:00:00 AM
Black and White print contained within the Wal Jack Bendigo and Geelong Album, see Reg Item 5003 for more details. Photo of an illuminated street sign, lamp, near Geelong Railway Station, at Mercer St corner, 11-7-1950. Photographer not known. Photo is glued into album. Sign has the words "Geelong Electric Tramways / Board tram at Curve" with a hand and finger pointing the direction to walk in.trams, tramways, geelong, signs, railway station -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s, c1950
Black and White print contained within the Wal Jack Bendigo and Geelong Album, see Reg Item 5003 for more details. Photo of an illuminated street sign, lamp, at the North Geelong terminus. Photographer not known, c 1950. Sign has the words "Geelong Electric Tramways / Destination? / No. 3 Terminus"On the rear in ink "Illuminated terminal sign"trams, tramways, geelong, signs, north -
Sunbury Family History and Heritage Society Inc.
Photograph, St. Mary's Anglican Church, Pre1910
This is an early photograph of St. Mary's Anglican Church in Sunbury. On 13th October 1863, the Government granted one acre of land on the corner of Stawell and O'Shanassy Streets for the building of a church. he first service was held on 24th November 1867. After that date subsequent additions were made. The gas lamp outside the church indicates that the photograph was taken before electric power was installed in Sunbury. St. Mary's Anglican Church is one of the earliest places of worship to be built in Sunbury.A non-digital sepia post card photograph of a small bluestone church with a slate roof with a wooden picket fence and two gates across the front. A gas lamp is on the pathway. Peter Collett's signature is on the back as well as a sticker with number 7 written on itst. mary's church of england., o'shanassy street, stawell street -
Wodonga & District Historical Society Inc
Domestic object - Electric Toaster, Hecla Electrics Pty Ltd, c1940s
Hecla produced a wide range of appliances for domestic use, beginning with heaters and later branching out to a wider range of kitchen appliances Hecla was established by Clarence William Marriott, a young Melbourne metal worker. He began manufacturing Australia's first carbon filament electric radiators in 1899. He originally worked for his father James Marriott who commenced business in Melbourne as an art metal worker in 1872 and was, in 1907, appointed as the official art metal worker to the Victorian Government producing items including the ornate iron gates and gas lamp standards outside Melbourne's Parliament House. With the invention of nickel chromium wire after 1900, C.W. Marriott began making more efficient heating elements using this new material in 1916. After being influenced by the eruption of Mount Hekla in Iceland, on 19 December 1918, Clarence registered the brand name "HECLA" with an erupting volcano as its logo. The company Hecla Electrics Pty Ltd was officially registered in 1922. In 1928 the company adopted the advertising slogan, 'By Hecla, it's Good'. The Hecla range rapidly expanded to include electric heaters and radiators, electric foot warmers, electric kettles, ceramic & metal electric jugs, immersion hot water elements, electric fans, electric coffee percolators, electric toasters, electric grillers and stoves, electric irons and electric frypans, clocks and curling wands. Electric blankets were introduced shortly after WWII.In 1930, a controlling interest in Hecla Electrics Pty Ltd was acquired by General Electric Corporation. Clarence William Marriott died in June 1967 in Melbourne, Victoria.This item is representative of a common domestic appliance used throughout Australia. It was manufactured by a pioneering Australian company.A small chrome steel toaster manufactured by Hecla Australia. It has a door on either side which flips down to insert or remove a slice of bread on each side, Each door has two black Bakelite knobs. The electric element is placed down the centre of the cavity. A detachable electric cord is included.240 Volts, 600 Watts. Cat. No. T4 Submitted to Electrical Approval Board Ref Application A1/AD01 SECV 240 Volt 600 Watt MANFED. IN AUSTRALIA SOLID BRASSelectrical appliances, hecla corporation australia, clarence william marriott, domestic appliances -
Wodonga & District Historical Society Inc
Book - Chandeliers and Billy Tea: : a catalogue of Australian life 1880-1940, Peter Cuffley
... lamps to electric lights, from horse drawn vehicles to cars ...Manufactured goods available in Australia over the period 1880 to 1940 underwent massive change. Australia moved from long skirts to shorter styles, from kerosene lamps to electric lights, from horse drawn vehicles to cars and aeroplanes. This collection reflects these changes in many aspects of people's life styles.This book documents the development of manufactured goods available in Australia over the period 1880 to 1940. This was the period between the end of the gold rushes and the Second World War. It consists of 224 pages including explanatory text, illustrations and a bibliography.Manufactured goods available in Australia over the period 1880 to 1940 underwent massive change. Australia moved from long skirts to shorter styles, from kerosene lamps to electric lights, from horse drawn vehicles to cars and aeroplanes. This collection reflects these changes in many aspects of people's life styles.manufactured goods australia 1880 - 1940, social life and customs, australian shopping directories -
Bendigo Historical Society Inc.
Vehicle - CARBIDE VEHICLE LAMP: PANTHER BIRMINGHAM
The Panther lamp was made by Powell and Hanmer of Birmingham. (see Item 7354) This model appears to be dated from the 1920's. Early models of the automobile, motorbike and bicycles used carbide lamps as headlamps. Acetylene gas, derived from carbide, enabled early automobiles to drive safely at night. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. These type of lights were used until reliable batteries and dynamos became available, and manufacturers switched to electric lights.Carbide Vehicle Lamp.-Silvered Metal, Lens Assembly . Small Green lens on both sides of the assembly, with a clear lens in front. 'Panther B'Ham' is stamped on the lower part of the assembly. In addition a Logo is Stamped with 'P H' and 'Ltd' under those letters. Carbide Gas section missing.Panther B'Ham -
Melbourne Tram Museum
Document - Photocopy, The Commonwealth Engineer, "Electric Lighting of Melbourne Cable Cars", "Electric Lighting for Melbourne Trams", 1917
Photocopy of an article from The Commonwealth Engineer, dated 1/8/1917, titled "Electric Lighting of Melbourne Cable Cars". Describes the battery system, the number of cars, the use of a motor generator at each depot, the lamps and the system on each car. Also has a start of a short item on the Kalgoorlie Electric Tramways Annual report. Short report in the same journal, 1/11/1917 titled Electric Lighting for Melbourne Trams", about a contract issued by the Tramway Board to the General Electric company for approximately 40,000 pounds. Also has an item about King River hydro electric power and the standardisation of the electrical industry.trams, tramways, cable trams, tramcars, lights, depots, general electric -
Melbourne Tram Museum
Document - Instructions, Tramway Board, "Rules and Instructions for Gripmen and Conductors re Electric Lighting of cars and dummies", "Edison Car lighting system - rules for the guidance of employees", 1/03/1919 12:00:00 AM
... and dummies", notes care for lamps, battery leads, failure, electric...", notes care for lamps, battery leads, failure, electric shock (7 ...Set of two instructions, duplicated foolscap sheets. Both signed by H. A Wilcox, General Manager. .1 - "Rules and Instructions for Gripmen and Conductors re Electric Lighting of cars and dummies", notes care for lamps, battery leads, failure, electric shock (7 volts) and cautions. Two sheets, Two copies held. Dated 1/3/19. .2 - "Edison Car lighting system - rules for the guidance of employees" - 4 sheets with brass pin in top left hand corner, giving details of connecting the batteries for charging, charging, battery car, methodology of using the rheostat, cleaning, jumper cables, reports, faults and contact electrical foreman Mr. T Dawe. Not dated.trams, tramways, lights, cable trams, batterymen, equipment -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s, Peter Duckett, late 1890's?
Yields information about the appearance of Bendigo Birney trams during the 1950's, possibly during enthusiast tour.Black and White Photograph of Bendigo steam tram motor No. 2 and bogie trailer No. 5, 1890's?, photographed with a building marked "Dining Rooms" in the background. Has the driver in the steam tram motor and the conductor standing alongside. Trailer marked "B.T.Co. Ltd", possibly around the turn of the century. Earlier photos have the full company name. Trailer has roof advertisement "Buy your Lamps at Faull's" - oil? or electric? Taken from a postcard or a magazine - has the caption "Street Railway Train in Bendigo, Victoria", possibly North American origin given the language. Peter Duckett Collection.On the front, top left hand corner of the print "26" in ink within a circle. On rear, stamped in black ink "Photo supplied from P.W. Duckett Collection, All Rights Reserved, 69 Howitt Rd. Nth Caulfield 3161." On rear in ink "Motor 6 and Trailer 5" and a "William F Scott" address label.trams, tramways, bendigo, steam tram motors, trailers, tram 6, tram 5 -
Ballarat Tramway Museum
Equipment - Edison Screw lamp holder, c1915
Item used to hold a light bulb inside a tram roof. Made in England, with a horse shoe makers mark and that it is "Vitreous" formed into the base of the item. Recovered from tram 14 during the project to rewire the trams. New light fittings are 24V rather than 125V DC.Demonstrates an item to hold a Edison Screw lamp inside a tram.White ceramic base fitted with a brass formed Edison Screw lamp holder fitted with screw terminals and brass parts. One of the securing brass screws remains in the holder.tram 14, tramcars, lights, electric lighting, tramcar maintenance -
Bendigo Historical Society Inc.
Vehicle - BICYCLE LIGHT
Francis Powell (1861-) and Francis Hanmer (1858-1925) founded Powell and Hanmer Ltd in the Summer of 1885 for the manufacturer of bike and carriage lamps. Their first advertisements began to appear in November of 1885. Early models of the automobile, motorbike and bicycles used carbide lamps as headlamps. Acetylene gas, derived from carbide, enabled early automobiles to drive safely at night. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. These type of lights were used until reliable batteries and dynamos became available, and manufacturers switched to electric lights.Acetylene bicycle light carbide. Green and red side lens. 200 cm High. Inscription Powell & Hanmer Birmingham. Previous Catalogue Number 112.lighting, accessories, bicycle light -
Bendigo Military Museum
Photograph - Personnel and Equipment, Army Survey Regiment, Fortuna, Bendigo. c1979, c1979
This is a set of 23 photographs of cartographic, aero-triangulation and lithographic equipment, and personnel at the Army Survey Regiment, Fortuna, Bendigo circa 1979. Photos .8P to .23P were taken in Lithographic Squadron’s printing, Camera, proofing rooms and external buildings. Cartographic Squadron’s SGT Jim McDonald operated the Editwriter type setting machine, as shown in photo .2P for a couple years in a room on the top floor of Fortuna Villa. This is a set of 23 photographs of cartographic, aero-triangulation and lithographic equipment, and personnel at the Army Survey Regiment, Fortuna, Bendigo, c1979. Black and white photos are on photographic paper and mounted on manilla card. They were scanned at 300 dpi. .1) - Photo, black & white, c1979, Typesetting machine, ‘Editwriter’ Model 7500, SGT Jim McDonald. .2) - Photo, black & white, c1979, Processor Model ACP101 & dual disk module (attached to Editwriter). .3) - Photo, black & white, c1979, Duplicating machine, stencil process electric ‘Gestetner’. .4) - Photo, black & white, c1979, Comparator photogrammetric stecometer, modified ‘Carl Zeiss’, CPL Jack Elverd. .5) - Photo, black & white, c1979, Point transfer device ‘Wild PUG IV. .6) - Photo, black & white, c1979, Zoom transfer scope, stereo ‘Bausch & Lomb’ .7) - Photo, black & white, c1979, Stereoplotter analytical automatic, ‘APC/3-1’. .8) - Photo, black & white, c1979, Prophylaxis unit, ‘Densply/Cavtron’ .9) - Photo, black & white, c1979, Machine punch register (made by Bendigo Ordnance Factory). .10) - Photo, black & white, c1979, Plan printer 122cm (48”) wide. ‘Admel Bruning’ Model - 5003A. .11) - Photo, black & white, c1979, Metal halide printing lamp. ‘Violight 5000 HV’ .12) - Photo, black & white, c1979, Densitometer transmission or reflection, ‘Macbeth’ Model – TR 524 MD. .13) - Photo, black & white, c1979, Machine whirling vertical type ‘Payne VLW’. .14) - Photo, black & white, c1979, Densitometer reflection, ‘Macbeth’ Model – RD917. .15) - Photo, black & white, c1979, Densitometer reflection, 240V ‘Cosar’ .16) - Photo, black & white, c1979, Printer contact ‘Hohlux’ Model RP-II, LCPL Martin Van der Maele. .17) - Photo, black & white, c1979, Frame printing vacuum vertical. .18) - Photo, black & white, c1979, Frame printing vacuum flip top 91cm x 117cm. .19) - Photo, black & white, c1979, Printer reduction stereo plotter diapositive ‘Wild’ Model – U3A modified and U4A modified to U4A plus. .20) - Photo, black & white, c1979, Printing press offset rotary lithographic 3 colour ‘Ultra-MAN-III’ .21) to. 23) - Photo, black & white, c1979, Camera cartographic consolidated super 100 32” x 32”The three personnel appearing in this set are identified. Most items have a full description, NSN, serial number, and the Repairer’s name, address and phone details and contact name. Just the full description is documented.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr -
Melbourne Tram Museum
Photograph - Black and White - VR Tram 37 - Elwood Depot, Victorian Railways (VR)
Photograph of tram 37 shows the Victorian Railways colour scheme, the oil lamp that was provided on VR trams on the St Kilda to Brighton, Electric Street Railway. Has 3 Robur Tea roof advertisements. The tram is shunting at the depot or waiting to run to St Kilda Railway Station, possibly after the closure of section south of the depot. Original Victorian Railways Photograph. Yields information about the location, the streetscape and the trams in use at the time. Black and white photograph of Victorian Railways tram 37 outside Elwood Depot in St Kilda St, possibly in the early 1950s. Original Victorian Railways Photograph.tramways, trams, vr trams, elwood tram depot, st kilda st, tram 37, victorian railways -
Melbourne Tram Museum
Photograph - Black and White - VR Tram 53 - Elwood Depot
Photograph of tram 53, shows the Victorian Railways colour scheme, the oil lamp that was provided on VR trams on the St Kilda to Brighton, Electric Street Railway. The tram is shunting at the depot or waiting to run to St Kilda Railway Station possibly after the closure of section south of the depot. Photographer not recorded. Yields information about the location, the streetscape and the trams in use at the time. Black and white photograph of Victorian Railways tram 53 outside Elwood Depot in St Kilda St, possibly in the late 1950s.tramways, trams, vr trams, elwood tram depot, st kilda st, victorian railways, tram 53 -
Melbourne Tram Museum
Photograph - Black and White - Victorian Railways Tram at Preston Workshops 1959
Photograph of one of the three Victorian Railways "Luxury" cars that were sold to the MMTB following the closure of the final section of the St Kilda - Brighton tramway on 28-2-1959. The tramcar has been placed on No. 15 trucks to enable movement around the workshops. Two of the trams, No. 52 and 53 were modified with longer running boards, full driver's bulkheads to replace the blackout blinds, route number boxes, removal of the red oil lamps above the headlight, conversion to from Broad gauge (5'3") to standard gauge, changes to destination boxes, seating and many other changes. Reference Destination City, Edition 5, page 103.Yields information about the former VR "Luxury" trams sold to the MMTB in 1959.Black and white photograph of one of the three Victorian Railways Trams sold to the MMTB at Preston Workshops.tramways, mmtb, trams, victorian railways, st kilda brighton electric tramway, preston workshops, vr class -
Melbourne Tram Museum
Photograph - Tramcar maintainer inspecting trams Elwood Depot, Victorian Railways (VR), 1930
Photo shows a tramcar maintainer or pitman inspecting the underside of a bogie tram at Elwood Depot using an electrical lead lamp.Yields information about the maintenance and inspection of tramcars.Photograph from the Victorian Railways Magazine June 1930 showing a Tramcar maintainer.In ink of rear of prints "Photo Victorian Railways"tramways, trams, st kilda brighton electric tramway, vr trams, victorian railways, tramcar maintenance staff, elwood tram depot, pitman