This bottle came from the Warrnambool aerated waters factory of Reg Reeves. This factory in Koroit Street, Warrnambool was established in the 1860s as the Union Cordial Factory by John Davis and then bought by John Fletcher in 1885. Fletcher’s business continued until 1930 when it was bought by Ralph Reeves. Coming to Warrnambool about 1900, Ralph Reeves managed a Banyan Street cordial factory which had been established by John Rowley. Ralph Reeves bought a cordial business at Hamilton in 1916 and sold it in 1929 to concentrate on his Warrnambool cordial factory. Reeves was joined by his son Reg in Warrnambool and Reg operated the business from 1946 to 1972. The trade name of Reeves was still used after Reg Reeves died and continued on for some years. This bottle is of interest as an example of the soft drinks made at the Warrnambool aerated waters factory of Reg Reeves. Reg and his father Ralph operated a cordial business in Warrnambool for 40 years. Cordial manufacturing was an important industry in Warrnambool for over 100 years.This is a glass bottle with a long rounded body, a round base and a short rounded neck. The top of the bottle has a moulded glass open top and there is a cork stopper with a brown top to enable the bottle to be opened by turning. The stopper has the name of the manufacturer of the soft drink on it and there is a multi-coloured label pasted on to the side of the bottle. The name of the soft drinks manufacturer is also impressed into the glass on the side of the bottle. There are two small chips near the base of the bottle. Stopper: R.V.Reeves R.V.R. Bottle: Reeves Imitation Cordial Pineapple Artificially coloured &flavoured This food contains not more than 2 grains of sulphur dioxide to the pint R.J. Reeves Warrnambool ralph reeves, warrnambool, reg reeves, warrnambool, cordial manufacturers in warrnambool, history of warrnambool

After WWII demand for wheelchairs increased. The original wheelchairs were driven by the patient's hands pushing the wheels. Later a motor was added. Then the motor and battery were built into the chair under the seat. This was followed by developments in ergonomics (comfort), controls, comfort and performance.See KVHS 1796, KVHS 1797Used by Wilma Davies, a Kiewa Valley resident, who suffered from polio from the early 1950s.2 large wheels - The outer wheel is steel and the inner is rubber with metal spokes attached. The foot plates are of ribbed steel. The ribbed seat is blue made of thick canvas as is the back of the chair. Some plastic has been glued on the back. The arm rests are also covered with old torn plastic. There is a metal stick on the side used to brake the chair by being pulled enabling it to touch the wheel and slow it down or stop it from turning."Sibbing / Melbourne" on the foot platespolio, wheelchair, pandemic

Stick mercury barometer, named after Admiral Robert Fitzroy of the Royal Navy (1805 - 1865) for his detailed instructions on interpreting the weather that are included with the instrument. Fitzroy was the captain of the Beagle, a weather forecaster to Charles Darwin and the second Governor of New Zealand. He developed many different types of barometers and was the first person to introduce the science of weather forecasting to the British Isles. A local manufacturer of scientific instruments, Thomas Gaunt, produced the barometer and it was adapted for the southern hemisphere by Robert Ellery, the State Astronomer based at the Melbourne Observatory. Described as "Gaunt's Fitzroy Barometers" in the original sale catalogue, it was priced from 25/- to ₤9.9s. [See Miller, M., Gaunt’s Time, 2014]. Thomas Gaunt's business was originally located at 14 Bourke Street East from 1858. In 1869-1870 he moved to new premises in the Royal Arcade, Collins Street. Gaunt's business became an institution in Victorian Melbourne and Gaunt its leading clock maker. PROVENANCE According to official minutes the barometer was purchased by the Melbourne Athenaeum in 1874. In particular, at the March meeting of the General Committee the House Subcommittee was instructed to "obtain a Fitzroy or other reliable barometer" to be "fixed in the Reading Room". The 1874 Annual Report records the purchase at ₤3.10.0. The barometer is historically significant as an example of the work of Melbourne’s leading scientific instrument maker, Thomas Gaunt. The barometer has social significance as an example of the type of accoutrements provided by the committee of the Melbourne Athenaeum for the comfort of its members. Further social significance lies in the fact that Robert Ellery, the Government Astronomer, who designed the local version of the barometer, has a direct connection with the Athenaeum being a subscription member and committee member of the Athenaeum during the 1870s. There are also records of a T Gaunt as a subscription member of the Athenaeum during the 1870s and 1880s which may be Thomas Gaunt, however, this is yet to be verified. Stick mercury barometer known as the Admiral Fitzroy Barometer. It comprises an oblong wooden case with glass front panel, ornate pediment, barometer with bulb cistern (empty of fluid),printed instructions for interpreting information given by the gauge affixed to left and right face of instrument. Includes a thermometer. The barometer appears to be intact except for the turning knobs which are missing and the mercury in the tube which is not present. Whether the instrument could be restored to working order is unknown. Front right panel, metal plaque: "Thos Gaunt, Barometer Maker, Royal Arcade, Melbourne"melbourne athenaeum, barometer, thermometer, admiral fitzroy, thomas gaunt of melbourne, robert ellery

Agfachrome Professional plastic mount (blue base, white cover) reproduction slide of a black and white photo of Geelong No. 35, at Pakington and Aberdeen St turning towards Chilwell. Photo taken early 1950's. Photographer unknown. Tram has the destination of Chilwell. Tramcar number can just be seen in the image - appears to be No. 35 - which fits the tram type. See also Reg item 4212 for the same photo - of Wal Jack. "G 20" and "1 -20" in pencil.tramways, trams, geelong, chilwell, pakington st, tram 35

Black and White Photograph of a major tram delay at the intersection of Gertrude and Nicholson St with many cable trams backed up in Nicholson St with a cable tram pit cover lifted, two workmen. Photo appears to have been taken soon after when trams were recommencing. In the view is a workman with a trolley and possibly the pit cover. Turning is a Barnet Glass Rubber Co. Ltd. truck with a soft roof. L. Perrin Photo.On rear in ink bottom left hand corner "L.Perrin"trams, tramways, cable trams, nicholson st, gertrude st, accidents, tram 528

Black and white negative, by Wal Jack, of SW6 854 turning from Church St into Swan St. Note the other curves for the opposite direction at the intersection. In the background is M Ball & Co. building, drapers, men and ladies clothing advertising war savings certificates and 5/- National Savings Stamp. Also an advert for Persil soap? Photo dated 23-7-1944 in the Wal Jack album along with details of the location and the tramcar.trams, tramways, church st, swan st, sw6 class, richmond, world war 2, tram 854

Black and white negative by Wal Jack of W5 800 (City Route 15) in Victoria St, after turning from Swanston St. Has another W2 in the background. In the background are the City Baths, a service station with adverts for Plume, Atlantic petrol and the building next door advertising Apex, and Nickel Chrome work. On the wall above the service station is a large advert for Used Cars at 501 Swanston St. Photo undated, c1940.trams, tramways, victoria st, swanston st, w5 class, route 15, tram 800

A coopers turning or bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw with a thin toothed blade that is held in tension by a frame with two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the center of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher.An age old tool used for cutting timber for hundreds of years before the modern cross cut saws were invented. This design of saw was part of a Coopers tool kit and used in the production of making barrels. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bow saw wooden handle with metal blade missingNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw, turning saw, coopers tools, cutting wood, sawing timber, coopering

The Diamond Valley Community Hospital was established in 1942 in Grimshaw Street Greensborough. This album records the redevelopment/building program in 1990-1991, and includes functions such as 'Turning the Sod' and many photos of buildings under construction. Due to financial circumstances, the hospital closed in 2000. This collection of photo albums is from the 1990s and was collected by staff. Photographs include staff, patients, buildings and functions held for the hospital. Photographs are not named. Albums may be accessed at the GHS Resource Centre. This volume is numbered 6. As the Diamond Valley Community Hospital is now closed, this collection of albums records some of the people involved. Many of the old hospital buildings in Grimshaw Street are still in use as medical rooms and it is interesting to see them being built in 1990.Photo album with dark blue cover. 56 pages, 253 photographs of varying sizes. Title handwritten and pasted on front cover.diamond valley community hospital, greensborough, dvch

Used before the invention of electronic calculators, mechanical adding machines were most often used for long calculations. This calculator was used in the Ballarat School of Mines Physics Department. Addition and subtraction were perfomed by turning the larger side mounted crank forward or backward. the smaller crank lever zeros the two registers. Two buttons are provided to set the machine either to clear the number entry with each revolution of the crank or to repeat the entry. The largest button resets the keybord to all 0s.A calculator with shiftable carriage and digit separator rods between each row of keys.ballarat school of mines, calculator

A coopers turning or bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw with a thin toothed blade that is held in tension by a frame with two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the center of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher.An age old tool used for cutting timber for hundreds of years before the modern cross cut saws were invented. This design of saw was part of a Coopers tool kit and used in the production of making barrels. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bow saw wooden handle with metal bladeNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw, turning saw, coopers tools, cutting wood, sawing timber, coopering

A coopers turning or bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw with a thin toothed blade that is held in tension by a frame with two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the center of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher.An age old tool used for cutting timber for hundreds of years before the modern cross cut saws were invented. This design of saw was part of a Coopers tool kit and used in the production of making barrels. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bow saw wooden handle with metal blade & frame tightening rodNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw, turning saw, coopers tools, cutting wood, sawing timber, coopering

Set of two wide-angle views - both with the initials HJS and PS&Co in the bottom corners. 1 - Illustration titled - "Ballarat Looking East from Town Hall Tower" - with a horse tram turning from Sturt St into Lydiard St North and another running westbound on the north side of Sturt St. 2 - "Town Hall to Bridge St from GPO Tower" - There are no horse trams in the view. The National Mutual building is yet to be built - see reference.Yields information about Sturt St from Bridge St to Armstrong St.Illustration cut from a magazine or publicationballarat, illustrations, sturt st, lydiard st, town hall, national mutual, craigs hotel, horse trams

View of the intersection of Sturt St and Lydiard St Nth with the Ballarat Post Office being the primary feature. Has an ESCo tram turning from Sturt St into Lydiard St. Shows the trackwork at this location and has several horse-drawn vehicles in the photograph. Would appear that Lydiard St north has either been watered or is being repaired. On the rear is a message to friends of a lady keeping house on a farm (Coolaban) near Lubeck Vic. It is dated 29/10/1911.Demonstrates postcard printing c1910 and has a strong association with the sender.Postcard - coloured, divided back, published by J. Ewins of Ballarat and printed in England.See image 2 for the letter sent in 1911.tramways, trams, esco, post office, lydiard st nth, sturt st

Postcard featuring Y class tram 469 turning from William Street into La Trobe Street during the 1985 cable car celebrations. Tram showing destination of Football. Flagstaff station was under construction at the time. Photo by Earl Ewers. Postcard produced by Association of Railway Enthusiasts ARE No. 10/06. Has Railcard copyright and phone number of rear, ARE shop details and hours, space for small message, address and stamp. This tram is on display at the Museum's Hawthorn Depot - see reference.Yields information about Y class trams and the intersection of William and Latrobe Streets.Postcard - Tram Y 469 - La Trobe St 1985 - produced by the Association of Railway Enthusiasts.trams, tramcars, y class tram, tram 469, william street, la trobe street, are

Mt Beauty Primary School and use of teaching aids.Plywood circular base with 16 wooden pencil shaped rods inserted around the perimeter equally spaced. Inside are 5 plywood colored circles each cut into equal parts - Half, thirds, quarters, fifths. 2. Polished timber 'sticks' joined at one end by screw and butterfly nut to created a hinge so that 'sticks' can be opened to form one long stick. Used to draw circles by holding and turning one stick around.2. 'Prep' in texta near hingemt beauty primary school, teaching aids, mathematics

Black and white photograph of SEC Tram 17 bound for the city turning from Barkly St. into Main St., on the Mt Pleasant route. Photo taken from the tower on the Ballarat Fire Station. Tram painted in the Bridge St. Traders Association Christmas Livery. Shows the view out to Mt Pleasant along Barkly St and the houses along this route. Photo by Dave Macartney - 23/12/1967. Photocopy made 4/1999 for display purposes.trams, tramways, mt pleasant, barkly st., main st, bridge st traders, tram 17

Yields information about Ballarat 's 38 and a classic Ballarat image, at the corner of Sturt and Lydiard's Street.Black and white photograph of SEC 38 turning from Sturt St. into Lydiard Street with the National Mutual Building and Craigs Hotel in the background. Tram showing destination of "Lydiard St. North". Photo taken c1971. Colour photocopy, laminated, of this photograph on display 5/2000 at 02-02-06 1370.1 - digital image of the same photograph supplied by Peter Bruce - from Reg Item 4569. Peter's title of image "No. 38 turns into Lydiard St".trams, tramways, sturt st., lydiard st. north, national mutual, tram 38

Black and white photograph of SEC Nos 12 and 18 meeting at the corner of Drummond Street and Sturt St. Taken by Dave Macartney 4/8/1968. Both trams inbound. No. 12 turning from Drummond St. Nth, showing "Depot via Drummond Nth" and No. 18 ex Sebastopol line. Both trams have the blinds drawn. Printed on Agfa paper. See also Reg Item 1412 for another print of this scene, but differently framed. tramways, trams, hospital corner, sturt st, junction, tram 18, tram 12

Black and white photograph of two Geelong bogie trams at the intersection of Moorabool and Ryrie Streets and Pengelly tram No. 17 turning into Moorabool St. See Reg. Item 2798 for a photograph just taken prior to this one. Tram No. 33 in Moorabool St. has the destination of Belmont, while the adjacent tram has the destination of North. The third tram is eastbound in Ryrie St. Note Safety zone signs, the bar traffic lights. In the background is Kays bakery. tramways, trams, geelong, moorabool st, ryrie st, traffic lights, safety zone, tram 33, tram 17

Yields information about the Lydiard St and Sturt St intersection and some of the signs that were in place at the time.Digital image, black and white, two photos of No. 12 southbound in Lydiard St North, before turning into Sturt St. Note Craigs Royal Hotel street lamp, the fire alarm box, fire plug post and the warning sign behind the Stop sign Photo taken by Peter Bruce 1970's and 1971, prior to the closure of the Ballarat tramway system. Peter's Title of image: "No. 12 and gas lamp" and "No. 12 Lydiard St Sturt 1"trams, tramways, lydiard st nth, craig s hotel, signs, tram 12

Horse drawn buggy. Black leather upholstered chair with studded back. Four large timber spoked wheels the back wheels are larger than the front wheels, with steel trim on edges of wheels. Axels connects wheels and have turning mechanism. Two metal steps on each side of carriage. Small wooden seat on back of carriage facing the back. Steel barrier at front of the carriage. Wooden attachment with two wooden poles to attach to cart to horse.No visible markings.transport, animal, buggy, cart, horse, dairy, carriage, jessie.

Set of two Agfa colour slide, blue and white plastic mount, photo by Keith Caldwell Oct. 22/3/1969 of trams on the Royal Park - West Coburg line, route 55. .1 - W5 684 turning onto the West Coburg via William St line from Flemington Road. Has advertisements for CU Insurance and First? drinks. .2 - W2 486 inbound in Royal Park, with destination of Domain Road Route 56..2 has "22/3/1969" in black ink.trams, tramways, route 55, west coburg, the zoo, flemington rd, route 56, royal park, domain rd, tram 684, tram 486, w2 class, w5 class

View appears to be from near Coolabah Drive looking northwest across parts of Edendale Farm and to the oval near the present day Adventure Playground and Wattletree Road. Possibly run in conjunction with the Eltham Community Festival or the Hurstbridge Wattle Festival; the steam train would conduct trips between Eltham and Hurstbridge Railway stations. As there is no turning table at Hurstbridge, the locomotive would simply shunt from one end of the carriages to the other to reverse direction, hence the locomotive is running in reverse as it approaches Eltham Station.Digital TIFF file Scan of 35mm Ilford HP4 black and white transparencyd-639, edendale farm, eltham festival, eltham north, eltham north adventure playground, george coop collection, hurstbridge wattle festival, steam engine, vintage train excursion, wattletree road

Possibly run in conjunction with the Eltham Community Festival or the Hurstbridge Wattle Festival; the steam train would conduct trips between Eltham and Hurstbridge Railway stations. As there is no turning table at Hurstbridge, the locomotive would simply shunt from one end of the carriages to the other to reverse direction, hence the locomotive is running in reverse as it approaches Eltham Station. The first house in the background on Railway Parade, Number 97, remains as of 2019. The next house, Number 95 has been demolised since April 2018 and new construction in place.Digital TIFF file Scan of 35mm Ilford HP4 black and white transparencyd-639, eltham festival, george coop collection, hurstbridge wattle festival, level crossing, passenger carriage 19bc, railway parade, steam engine, vintage train excursion, wattletree road

Possibly run in conjunction with the Eltham Community Festival or the Hurstbridge Wattle Festival; the steam train would conduct trips between Eltham and Hurstbridge Railway stations. As there is no turning table at Hurstbridge, the locomotive would simply shunt from one end of the carriages to the other to reverse direction, hence the locomotive is running in reverse as it approaches Eltham Station. The first house in the background on Railway Parade, Number 97, remains as of 2019. The next house, Number 95 has been demolised since April 2018 and new construction in place.Digital TIFF file Scan of 35mm Ilford HP4 black and white transparencyd-639, eltham festival, george coop collection, hurstbridge wattle festival, level crossing, passenger carriage 19bc, railway parade, steam engine, vintage train excursion, wattletree road

A short distance upstream from the old wooden Warrandyte Bridge, the Yarra river was at one time dammed to give power to a large wooden waterwheel which drove a plant for crushing gold. Up until around 1908 the waters of the Yarra, pent up by a stone weir, forced their way past this old wheel turning it to crush the precious quartz. In 1925 the reamins of the State Battery were removed. The large water wheel (thanks to the forethought of a local resident, Mr. P. Mackie) was left in its position.This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as the 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital image 4 x 5 inch B&W Negshire of eltham pioneers photograph collection, warrandyte, water wheel, caledonia battery, state battery, warrandyte battery

Prelude to conflict -- Blitz in the West -- Britain alone -- Italy falters -- Hitler strikes South -- Enter Rommel -- Barbarossa -- The War against Japan -- The onslaught continues -- From Moscow to the Crimea -- Turning point in the desert -- Stalingrad to Kursk -- Victory in the desert -- The Convoy battles -- Hitting back against the Japanese -- The Italian armistice -- To the Gustav Line -- Approaches to the Philippines -- War over the Reich -- The invasion of France -- Destruction of the Army Group Centre -- The Seine to Arnhem -- The Empire's last throw -- Victory in Italy -- The end in Europe -- Victory over Japanhard cover non-fiction book maps and diagramsInscription on the first page "To Dad Happy Birthday, with love Jenny xxx 1987" Glued into the same front page is an article cut from the AFR Dec 22-27 2011.

William Grant Junior was President of the Shire of Bacchus Marsh in 1901 when the Australian Colonies federated to become a federal nation state. Grant was a member of a prominent local family and was active in public affairs throughout his life. The federation of the Australian Colonies was a turning point in Australian history and as such its achievement was celebrated in a range of ways. A major step towards achieving Federation was the referendum of July 1899 which saw five of the six Australian colonies vote in favor of Federation, with Western Australia later voting in favor in 1900.Printed poster sized document certifying that William Grant of Bacchus Marsh voted in a referendum of Victorian electors on 27th the July 1899 on the question of an Australian Federal Constitution. The body of the certificate text is surrounded on three sides by captioned photographic portraits of the Premiers of the six Australian Colonies. A British coat of arms is at the top of the certificate and at the bottom is an image of Parliament House in Melbourne, which includes a Dome, which was a projected feature of the building which was never actually added to the Victorian Parliament building.Across the top of the certificate: 'Australasian Federal Referendum July 1899'. In the centre: 'This is to certify that the question of an Australian Federal Constitution was submitted to the Electors of Victoria on the 27th day of July 1899 and that out of a Poll of 103,783 votes 152,653 were cast in favor of such Australasian Federal Constitution and further that William Grant, voted at the said election'. Signed, [George Turner], Premier. At bottom: 'Robt. S. Brian, Government Printer, Melbourne'.william grant 1850-1924, federation (1901), referendums, illuminated certificates

Journal of the Tramway Museum Society of Victoria. Ltd. Volume 5, No. 4. Feb - March 1969. 30 cents, sixteen pages. Front cover photo took by Malcolm Rowe. Bendigo Birney no. 28 seen in its guise as "Myer's santa special" turning out of Caledonia Street on the North Bendigo route on Saturday, 21st December 1968. The conductor's red uniform is rather non-standard, but it matched the color on the roof of the car. History of document: Part of 'Basil Miller Tramways Collection'.document