Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Aerial view, probably of Northern Territory, when visiting Alice SpringsMade in Australia / 31 / DEC 66M4 / Encircled 1 (Handwritten)northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Streetscene, Alice Springs, Northern Territory, Australia.Made in Australia / 30 / DEC 66M4 / Encircled 37 (Handwritten)northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Rock detail, when visiting Alice Springs, Northern Territory, Australia.Made in Australia / 16 / DEC 66M4 / Encircled 2 (Handwritten)northern territory, slide

Made in 2016 for the Australian Sheep and Wool Show. It was entered into the needle felting section and won. Emu and Kangaroo made from Ultra fine Merino from a sheep called Ninja with a micron count between 14-15 from Casalana fine wool.Woolen Coat of Arms on round metal frame. Kangaroo and Emu made of Ultra fine Merino and real Emu feathers. Coat of Arms felted together by hand. Winning sash, judges scorecard, wool sample and Certificate Included.

Bricks for toilet block construction were made at Kimmells farm by Clyde Worseldine, Tambo Shire employee after WW2Colour photograph of the toilet block situated on the eastern wharf precinct, showing a public toilet block constructed of concrete bricks made locally, entrances faced with local stone. Lakes Entrance Victoriajetties, public facilities

Model of Victorian Railways Broad Gauge - Dalhouse Station The Models were hand made including electric motors and cast metal by Desmond Henry Ramsay over 40 years - from the age of 15 ( 1930 ) until his death in 1970. The locomotives and carriages are all replicas of Victorian Railways Broad Gauge. The Dalhouse Station and station yard were inspired by victorian railways design. This Model of Victorian Railways Broad Gauge was kindly donated to the Puffing Billy Railway Museum by the family of Desmond Henry Ramsay - Elwyn Stankiewicz - Vanessa Bourke - Roger Ward. (plaque afixed on case)Historic - Hand made Model of Victorian Railways Broad Gauge by Desmond Henry RamsayModels of Victorian Railways Broad Gauge rolling stock - Hand Made - plastic and cast metal puffing billy, victorian railways, model railway, o scale, desmond henry ramsay

Photograph made in 1990 by A.P. Winzenried for, "Green Grows Our Garden," p41.3 copies colour photograph. Copy of sepia photograph on an album page made in 1990 by A.P. Winzenried. Edna Walling standing in the Ornamental Gardens holding a tool over her shoulder. A male student walking in the background.On reverse, "Edna Walling as a student at Burnley, 1917 Courtesy of Noelle Kendall." ( Vaughan.)a.p. winzenried, green grows our garden, edna walling, female students, noelle kendall (née vaughan)

This printers block was made for the Warrnambool and District Historical Society and used to print letterheads, envelopes and cards. The impression on the block is of the sketch map drawn by Thomas Price of Port Fairy of the Warrnambool Harbour site when he wrote to Superintendent Charles LaTrobe in 1844 regarding the suitability of the site for a new town. The letter is regarded as an important impetus for La Trobe to consider establishing the town of Warrnambool and so the sketch was used by the Historical Society as its logo on letterheads etc for many years. It was also used as the heading for the Society newsletters from the late 1980s to late 2007.This block of the Thomas Price sketch was used by the Historical Society for many years for its printed material and the sketch was used as its logo for about 20 years so it is an important part of the Society’s history and the block is kept as a reminder of this.This is a printing block with an impression made of metal and attached to a wooden block. The wood is in layers of dark and light coloured wood and has a piece cut out at the top left hand corner. The impression is a representation of the sketch map of Warrnambool Harbour made by Thomas Price in 1844.Sketch map of Warrnambool Harbour 1844warrnambool & district historical society, thomas price sketch

The first electrical hearing aids were carbon and were made possible by the invention of the carbon microphone and were made between 1900 and 1939. Carbon, which can be made to amplify electrical current, was used to provide some amplification prior to the invention of vacuum tubes. Later models often came with mechanical (carbon) amplifiers to try to boost the amount of amplification. The carbon microphone was originally invented for use in the telephone and had the properties of being able to modulate current. It is this property that made it useful in the early electrical hearing aids. An example of a carbon hearing aid. This has an imitation tortoise shell casing. Round dark red and black imitation tortoise shell carbon hearing aid with clip for attaching to clothing, and a slide for adjusting the sound (?) a cord split between a plug and a speaker (?)."SONOTONE/REG U.S.P.A./292392/MADE IN U.S.A./ELMSFORD, N.Y." on bottom of unit. "SONOTONE" on plug. "PAT RE 21030" on speaker? deaf children australia, hearing aid, sonotone

Stoneware is a rather broad term for pottery or other ceramics that is fired at a relatively high temperature.  A modern technical definition is a vitreous or semi-vitreous ceramic made primarily from stoneware clay or non-refractory fire clay. Whether vitrified or not, it is non-porous, it may or may not be glazed. Historically, across the world, it has been developed after earthenware and before porcelain and has often been used for high-quality as well as utilitarian wares. As a rough guide, modern earthen wares are normally fired in a kiln at temperatures in the range of about 1,000°C (1,830 °F) to 1,200 °C (2,190 °F); stoneware's at between about 1,100 °C (2,010 °F) to 1,300 °C (2,370 °F); and porcelains at between about 1,200 °C (2,190 °F) to 1,400 °C (2,550 °F). Historically, reaching high temperatures was a long-lasting challenge, and temperatures somewhat below these were used for a long time. Earthenware can be fired effectively as low as 600°C, achievable in primitive pit firing, but 800 °C was more typical. Stoneware also needs certain types of clays, more specific than those able to make earthenware, but can be made from a much wider range than porcelain. A domestic item used to store food products as glazing makes the container non-porous, often used for pickling. Or larger containers for kitchen flour. Items age is difficult to determine given the same techniques for making stoneware are in use today. Stoneware containers were made by many potteries in Australia and England. They were in common domestic use before plastics were invented around 1940 to store goods so this subject item is probably from around 1900 to the 1940s.Item's significance is difficult to determine given it is not associated with a place, person, historic event, or manufacturer. Its significance lies with its use as a domestic object giving today a view into our social past.Brown salt glaze stoneware bottle None (possibly made by Royal Doulton UK)flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, flagstaff hill maritime village, great ocean road, bottle, stoneware bottle, storage, kitchen ware, salt glazed, stoneware, shipwreck coast

Photograph,of two men, displaying a presentation box containing a satin edged blanket with the royal coat of arms, made at Godfrey Hirst Mills and a record. The blanket was made at Godfrey Hirst & Co Pty Ltd as a gift to Princess Elizabeth on the occasion of the birth of Princess Anne, 1950, and was accompanied by a recorded message.(ref w6036)Photograph, black and white, of two men, displaying a presentation box containing a satin edged blanket with the royal coat of arms on silk.Made at Godfrey Hirst's for/ Princess Anne Capt A C Dykes/Mr McDonald/ British Travel Assnweaving mills textile mills weaving textile mills - staff, godfrey hirst and co. pty ltd, weaving mills, textile mills, weaving, textile mills - staff

William Thomson described a new "Marine Azimuth Mirror" at the 1877 meeting of the British Association for the Advancement of Science, and patented the design in Britain and the U.S. This instrument is an example of the improved design, with a reflecting prism in place of the original mirror. Thomson introduced this form in the early 1880s. The signature indicates that it was made during the period 1900-1913. A child prodigy, William Thomson went to university at the age of eleven. At twenty-two he was appointed Professor of Natural Philosophy in Glasgow where he set up the first physics laboratory in Great Britain and proved an inspiring teacher. He primarily researched thermodynamics and electricity. On the practical side he was involved in the laying of the Atlantic telegraph cable. He was also the partner of a Glasgow firm that made measuring instruments from his own patents.An instrument of significant importance which made marine navigation easier and more accurate in the early twentieth century.An Azimuth mirror with wooden box.Kelvin & Hughs Ltd Serial No - illegible Made in Great Britainazimuth mirror, william thompson, lord kelvin, naviagtion, marine instruments

A marlinspike is a tool used in marine rope work it is shaped in the form of a polished metal cone tapered to a rounded or flattened point, it is used in such tasks as unlaying rope for splicing or untying knots. For drawing a marline tight and using a marlinspike hitch as well as for joining toggle ropes under tension in a belaying pin splice. Most marlin spikes are 15–30 cm long, but may reach 61 cm and more for working heavy cables and ropes. They are usually made from iron or steel, whereas fids, similar in shape and function, are formed from wood or bone. The marlinspike may be a separate tool or as an item on a pocket knife. Sailors who become proficient at knot tying, splicing, and sewing using the marlinspike are said to have mastered marlinespike seamanship, earning them the right to be known as marlin spikes or marlinspike seamen.A tool still very much in use today wherever a rope or cable requires joining, splicing etc the marlin spike tool design has not changed since first invented centuries ago as a sailors tool to splice and make repairs to ropes and cables on board a ship. This item gives a snapshot into the life sailors have on board sailing vessels past and present. Marlin Spike made of solid steel. Handle is bulbous and spike end is rounded.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marlin spike

This fishing rod was donated to the Wodonga Historical Society by Mr. David Brown who is a retired Victorian Railways driver. It was made for him by Mr. Jack Bowden in 1962. Mr. Bowden was the driver of the Southern Aurora when it crashed with a freight train at Violet Town on 7 February 1969. The Sydney – Melbourne passenger train was bound for Melbourne. At about 7.05 a.m. the “Southern Aurora” collided head-on with the Melbourne-Albury goods train near Violet Town. 8 people lost their lives in the crash and 117 were injured. Driver John Bowden had died of cardiac arrest at some time before the collision. The driver of the goods train, Lawrence Rosevear, a good friend and workmate of Jack Bowden had tried to apply the brake when he realised the Aurora was not slowing down, but was unable to stop the impact. Lawrence also died in the crashThis was made by a local train driver who was died in the "Southern Aurora" train tragedy.A hand made fibre-glass fishing rod with wooden handle and agate runnersfishing, fishing equipment, recreational fishing, southern aurora

Timber pressure frame, made of pine, glass, with metal and brass hinges Made to

Fashion accessoryTape lace collar. Machine made tapes with needle made filling stitches.

Boots made in U.S.A//imported by store owner Antonio Mascorini/owned by Mrs Mascorini of Bright/donated by her great,great granddaughter Josie CassarottoThe significance of these boots ' they were owned by Mrs. Fanny Augusta Masciorini, wife of Antonio, owner of the Fashion store London House in Gavan Street Bright00054,1 : left boot; 00054.2 : right boot Caramel-brown ladies leather boots, mid-calf, lace-up front, 36 eyelets with laces. Stitching near toes and around heels. Worn left heel with nails heads showing. Foam inside boots.Under left heel "THE LASALLE & KOCH CO." $11.00 inside boots "MADE IN U.S.A"ladies apparel, boots, leather, masciorini, cassarotto, london house bright

Scalebuoy. Invented by Hartley Abbott and patented under the name of the Bendigo Electronic Company, made in various sizes & for different applications, such as to prevent scaling in the boilers at mines. Part of the Aileen and John Ellison collection.Made up of a sealed glass bulb containing mercury and gasses enclosed within a chromed wire cage and with a chromed handle. The one shown being a handheld shaker model. science, bendigo electronic, abbott

TANK MADE FOR THE CRESWICK NURSERY- 10,000 GALLONS - 14 FEET 3 INCHES WIDE X 10 FEET 6 INCHES MADE OF 22 GAUGE GALVANISED IRON.PHOTOGRAPH OF GROUP OF MEN AND CHILDREN [INCLUDES CARL AND FRITZ WEICKHARDT] WITH A LARGE TANK MADE AT WEICKHARDT'S TANK FACTORY IN FRASER STREET, CLUNES. .1 BLACK AND WHITE PHOTOGRAPH MOUNTED ON MATT BOARD .2 PHOTO PRINT OF BLACK AND WHITE PHOTOGRAPH .3 PRINT OF PHOTOGRAPHphotography, shops -weickhardt's tank factory., weickhardt, weickhardt tank, champion tankmaker

This is a coat hanger made in Germany for the Warrnambool firm of Cramond and Dickson. John Cramond and James Dickson opened a general store in Warrnambool in 1856, selling men’s and women’s clothing, drapery and manchester and it had its own tailoring and millinery business. This store became a prominent one in Warrnambool for over 100 years, closing in 1973. The business operated for most of this time at the corner of Timor and Liebig Streets. This coat hanger is of great interest as a memento of the business of Cramond and Dickson, one of the most important businesses in Warrnambool’s history.This is a wooden coat hanger with a metal hook inserted in the centre of the hanger. The wood has been smoothed and stained to a light brown colour. The wood is curved and the ends are slightly tapered. The hook has a round stud at the bottom to prevent the hook from coming out of the hole. The hook is somewhat rusted. The printing on the hanger is in black.‘Cramond & Dickson Tailors & Outfitters Warrnambool Made in Germany’.cramond and dickson,, warrnambool, history of warrnambool

This garment has been hand made and presumably worn by Mrs McKeown (nee Ford)A long white night gown made of fine cotton. It has a small crochet trim around the "V" neck line and also a lace panel inserted around the bodice. The bottom of the skirt has a trim of broderie anglaise. costume-female underwear

This Bone Chisel was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928. Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community. They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine, administration, household equipment and clothing from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Bone Chisel - small, Made by Weiss & Sonflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, department of defence australia, australian army, army uniform, medical treatment, medical history, medical education, bone chisel, weiss & son

Clothing. Made from soft lambskin, the leather appears to be finely punched all over, giving the appearance of tiny pin holes over the outer surface, but not showing through to the inside. Finely bound at the top edge, and around a 3 cm long round split at the outer wrist. The inside of the leather has a brushed finish-soft and warm. Three rows of stitching on the back of the hand, and around the wrist give a decorative effect.Inside left glove 'LAMBSKINS. Made in Italy. Inside right glove 7.costume accessories, female, honey coloured leather gloves

This souvenir dish has been made by the German firm of Alka. The name comes from the surnames of the two proprietors, Alboth and Kaiser. This type of dish was made between 1938 and 1958. Tourism has been an important industry in the Warrnambool area for over 100 years and souvenir dishes of this kind were a popular buy by the visiting tourists. The dish features a scene from the Hopkins River, a fishing and recreational area in Warrnambool since the early days of European settlement. Souvenir dishes such as this one can be sometimes found in local second hand and opportunity shops. This dish is of interest as an example of the high-quality souvenirs bought by local tourists in the Warrnambool area in the mid 20th century.This is a china dish made in a rounded-edged triangular shape. The rim is gilt-edged. In the centre of the dish is a coloured sketch/photograph of the Hopkins River in Warrnambool (Clifton Banks region). ‘Warrnambool Hopkins River’ ‘Alka Bavaria Germany’ tourism in warrnambool, hopkins river, warrnambool, history of warrnambool

The two semaphore flags were used as a pair for visual signaling by hand. The semaphore system is an alphabet signaling system based on the waving of a pair of handheld flags in a particular pattern to compose words to be communicated to passing ships. The system was introduced by the Royal Navy in 1880 and was later adopted in Australia, with the first School of Signaling opening in Williamstown in 1890. The system was superseded in the 1970s by more sophisticated methods of communication. Information on the Cape Nelson flags indicates that they were made by Evan Evans P/L, Flag makers, 690 Elizabeth Street, Melbourne. Evan Evans (d.1927) started a tent‐making business in 1877 and by 1920 Evan Evans P/L maker of canvas goods, was located at 680 Elizabeth Street, Melbourne. In 1924 it acquired land at 632 Bourke Street and built a new factory. His son Ivor continued the business after 1927 and in 1938 opened a bulk store in Carlton.271 In 2016 the firm was located at 673 Spencer Street, Melbourne. Another pair of white semaphore flags made by Evan & Evans is held at Gabo Island, and Wilsons Promontory also has a pair. Cape Nelson’s white semaphore flags have second level contributory significance. They have historical importance as flags formerly used at the lightstation for visual signaling, a system that is now rarely used in navigation, and contribute to the importance of the lightstation’s large collection of flags.A pair of white flags made of white canvas/heavy cotton, the square flags are attached to dowel poles with staples.

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s. This recorder belonged to Alfred Haeusler (b.1922) and was played during his childhood in Wodonga in the 1920s-1930s. The recorder is one of several objects in the Haeusler Collection concerning early childhood that provides insight into family and home life in early twentieth century Wodonga. Recorders belong to the family of woodwind instruments and were first produced in the early eighteenth century. The instrument was popularly revived in 1919 by English instrument maker Arnold Dolmetsch. This item has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history, social history, and women’s history. Plated iron alloy recorder with visible rust, roughly 20cm long. "MADE IN JAPAN"/"SK"music, musical instrument, recorder, wind instrument, school, child, childrens, haeusler collection, music lesson, woodwind instrument