Inside helmet inscribed with Pearce and manufacturers label "Staggs Australia" .Goggles inscribed with Jenkins 36936

This item is part of the Di Reidie collection. Diane Reidie was a much loved volunteer and President of Brighton Historical Society from 1999 until 2016. Originally from New Zealand, Di and her family lived in Male Street, Brighton for many years. A vibrant and energetic person with a zest for life and a gift for bringing people together, Di was a friend to many in the Bayside community and active in local community organisations. Her tireless work as President of BHS saw her named Bayside Citizen of the Year in 2008. As a seller and collector of vintage clothing, she was passionate about fashion history; one of her many enduring contributions to BHS was her extensive work in preserving, developing and promoting the Society's costume collection. In 2018-19, Di donated more than one hundred items from her personal vintage clothing collection to the Society. The collection, which includes clothing, hats, handbags and shoes from local and international designers, is representative of Di's wide-ranging interests, colourful personality, creativity, humour and love of fashion and travel. Of all the items Di donated to the Society, this four-piece Easton Pearson outfit was her favourite. When she bought it around 1997-98, it was the first time she had spent a large amount of money on clothing, and she thought it only fitting to throw a suitably elegant party at which to wear it. James Cameron's hit movie 'Titanic' had just been released, and upon discovering the recipe book 'Last Dinner On the Titanic: Menus and Recipes from the Great Liner', Di was inspired to host a Titanic-themed party for her friends. Held at her home in Brighton in 1998, the event included a string quartet, an eleven-course meal prepared entirely by Di, and a life boat in the backyard swimming pool.A four piece outfit consisting of a blouse/cardigan, camisole, skirt and wrap. Double-layered silk wrap with an outer layer of silk chiffon. Both ends feature and embroidered band of brown and black cotton, copper wire, and copper glass beads. Camisole of black and copper shot polyester rayon with wide shoulder straps and small shoulder pads. Blouse of brown silk chiffon, with a v-neck and eleven silk-covered buttons and loops at centre front. Patch pockets over front hip and full length sleeves. The neckline and sleeve edges are trimmed with copper-coloured glass beads. Full-length double-layered straight skirt with black and copper shot polyester rayon lining and silk chiffon overskirt. The skirt secures centre back with a nylon zip and botton closure. The skirt features a centre front embroidered panel of brown and black cotton leaf and flower motifs, with copper wire and copper glass beads. manufacturer's label: "Oh! Easton Pearson", "Pure Silk", "Polyester Rayon", Care label, "M"costume party, titanic, easton pearson, pamela easton, lydia pearson, australian fashion, di reidie, 1990s

A slide image of the old Legacy House in Market Street from 1957. It shows children and people gathered to go on an outing to the sea known for many years as Operation Float. Legacy rented the Market St premises for many years. A small 'Legacy House' sign can just be seen between the bus and the sign post. It was part of the Western Market complex that was demolished and redeveloped in the early 1960s. Legacy held meeting and the girls classes on the second floor of the building but it was barely fit for purpose. In the 1940s a generous donation by an anonymous donor meant Legacy could purchase a building at 342 Swanston St, but due to several factors were never able to inhabit it. Finally it was sold in 1954 and Junior Legacy Melbourne purchased 289-299 Swanston Street Melbourne (previously called Red Cross House) in 1956 from the Commonwealth Government. As part of the conditions of the donation it was named in memory of David H Dureau. Renovations were needed to the 289-299 Swanston St building so this slide shows that Legacy were still in the Market St building in 1957 while they occurred. A record of the Market Street building that Legacy occupied for many years until 1956-7.Colour slide of Legacy House in Market Street from 1957.Slides has 'Que for Operation Float looking up Market St'. It is numbered '14' by the manufacturer.properties, market st, streetscape

The purchases and services recorded indicate that the user was an ironmonger. Origin of ledger unknown. Early business in Sandhurst in 1860s.An account ledger used to record the purchases and services made for a business. Records date from 1860. The ledger is covered with brown leather with decorative edges. There are alphabetical tabs at the front of the book with lists of names. Individual customers are allocated a double page entry. Pages are ruled and numbered. The book is in very poor condition having obvious signs of water and insect damage. The writing in the first quarter of the book is barely legible, remaining pages can be read. Some names - Durant, Watson, Mollison, Harris, Neale, Cahley, Bannerman, Larritt, Cranshaw, Gripe, McLachlan, Burrell, O'Loughlin, Cameron Rogers, McLevey, Nicholas Eliad?, Crago, Hopsell, Grant, Bird, Cahill, Harker, Parker S McKinlay, Fletcher, Birch, Cruikshank, Municipal Council, Heffernan and Crawley, Buckley Bros, John Harney, Bywater and Brother, Goulding, Casey, Reynolds, English, McKenzie, Knight, David Mackay."LEDGER" on the spine. Label inside "Sands and Kenny. Account Book Manufacturers. Stationers and Printers Melbourne"bendigo businesses, ironmonger

This puzzle was used by the Parker family. You probably had a set similar to these; I know I did as a kid. While these haven't completely vanished from the toy landscape, there are still a few sets of "Puzzle Blocks" being made today. Basically, these were six puzzles in one, made up of wooden cubes, each with 1/20 of the image glued to them. Usually they came in a tray or carrying case, allowing the owner to have a place to assemble the pictures. A 20 piece Walt Disney's All Wood Blocks puzzle with 6 coloured forms or pictures on all four sides of the blocks in a yellow cardboard carry case with a 6 in 1 Puzzle. The case has a plastic see through frame on the top to see the puzzle and a white plastic closing clip and handle on one side. The puzzle can be made in the box. On the back of the box are pictures of the six puzzles of Mickey Mouse and friends to be made.Details of the manufacturer are printed on the sides of the box as swell as explanations about what the carry box contains.toys, games, leisure games, children's toys, box puzzles

Name on drycleaning ticket - "SHARPE".RAN Winter ceremonial uniform Officers. 1. Jacket, black colour wool/polyester fabric. Double breasted with six buttons, collar, two inset lower pockets with flap. Shoulder patches/flashes at top - black fabric, gold lettering "AUSTRALIA". in middle of sleeve black fabric with gold thread embroidered Queen's Crown, with real inserts and crossed anchors. Attached below are three gold stripe chevrons on black fabric. indicates Petty Officer with years of service. Buttons - gold colour metal buttons with shank with raised lettering and emblem - Queen's Crown, Anchor and "AUSTRALIA" (one missing). Lining - black colour polyester/ cotton fabric. Two concealed pockets. Sleeves - two gold buttons. Right sleeve - shoulder patch - black colour fabric with gold embroidery "S" in six pointed star surmounted by Queens crown with red inserts. Petty Officer - Steward. 2. Trousers - black colour wool/polyester fabric with fob pocket, two inset side pockets, one inset back pocket. Black and white colour buttons for waist adjustment and braces. cream colour cotton fabric lining waistband and pockets. Black colour ribbon stripe down outside seam. Metal zipper fly. Manufacturers information - gold embroidery. 1. "C.G.C.F.", on back of metal buttons "STOKES & SONS/ MELB".ran, uniform, steward

The Epstein, Macintosh, Oxford vaporizer (EMO) was designed in 1952 by Dr H. G. Epstein and Sir Robert Macintosh of the Nuffield Department of Anaesthetics at the University of Oxford, with the aid of their technician, Mr Richard Salt. It was essentially a refinement of their earlier Oxford vaporizer and designed specifically to deliver ether in known concentrations, irrespective of the temperature of the ether. Robert Macintosh was born at Timaru New Zealand in 1897. In December 1915 he travelled to Britain and was commissioned in the Royal Scots Fusiliers, soon transferring to the Royal Flying Corps. He was shot down behind enemy lines on 26 May 1917 and taken prisoner, escaping several times. When the war ended he returned to medical school and qualified in 1924 as MRCS LRCP. Macintosh's initial intention was to be a surgeon, but soon after qualifying he developed an interest in the field of anaesthesia. Macintosh became the first professor of anaesthetics at Oxford although the university was at first against the appointment. He recruited the scientists Dr Kurt Mendelssohn and Dr H G Epstein and together they designed and built the Oxford vaporiser, a simple, portable, and accurate means of delivering varying concentrations of ether which was to see service in the second world war. He was knighted in 1955 and died at Oxford in 1989.The apparatus is a round, barrel style object with three small rubber feet and a moulded handle over the top. It consists of a vaporising chamber, wick, ether level indicator, temperature compensating value, air bypass chamber and mixing chamber. Manufacturer's label on reverse: EMO, Longworth Scientific Inst. Co. Ltd. England. Serial No. 5878macintosh, epstein, oxford, vaporiser, nuffield, ether

This instruction book was donated with our collection's Wertheim sewing machine accessory box. The box contains 12 accessories, the instruction book and the receipt for the purchase of a Wertheim sewing machine. The receipt was written on July 23rd 1891 by the Wertheim distributor in Melbourne, Hugo Wertheim. His business was the Wertheim Sewing Machine and Hapsburg Piano Depot, trading at 173 Williams Street, Melbourne. The purchaser was Mrs Burrowes from Burrumbeet, Victoria, a district northwest of Ballarat. She paid £6-6 (six pounds and six shillings) in cash. The receipt was signed by H. Wertheim and the other signatory looks like John A. Cherry. Hugo Wertheim (1854-1919) was an agent for his father’s cousin Joseph Wertheim, a well-established sewing machine manufacturer in Germany. He was born in Lispenhausen, Germany, and migrated to Melbourne in October 1875, where he opened a merchandising business at 39 Flinders Lane East. He returned to Germany in 1885 to marry Joseph Wertheim's daughter Sophie Emilie. The couple came back to Melbourne, and Hugo quickly established a substantial business selling sewing machines, bicycles, pianos and other mechanical devices, under brands such as Wertheim, Electra, Planet, Griffin and Hapsburg. He exhibited at agricultural shows and in 1901 at the Pan American Exposition, Buffalo, United States of America. One of his staff was O. C. Beale, who later set up his own piano business in New South Wales. Hugo continued to own 25 per cent of one of Beale's companies, which became Wertheim's Queensland business. In 1908 Hugo Wertheim opened a piano factory in Richmond, Melbourne, aiming to produce 2000 pianos and player pianos a year, predominantly using Australian materials. In laying the foundation stone, Prime Minister Alfred Deakin observed that “few men with such opportunities for a life of ease would have embarked on such an enterprise” Hugo died of chronic hepatitis in 1919 at his home in South Yarra. His eldest son, Herbert Joseph (1886-1972), continued the business. The piano factory closed in 1935, becoming a Heinz food processing plant and in 1955, GTV Channel 9 studios and offices. The Wertheim Sewing Machine Company – Joseph Wertheim (1804–1899) founded the company in 1868 in Frankfurt, Germany. At this time Joseph was the Frankfurt city delegate for the Democratic Party. At its height, the Wertheim factory employed approximately 650 workers. The company used a trademark of a dwarf holding a hammer which is known to have been used until at least 1925, however in 1909 a Star of David was also registered. In 1870 a Wertheim subsidiary was formed in Barcelona, Spain. The business imported and sold complete machines, including the English Jones machine. Locals began calling the sewing machines “las rapidas”, and the business became known as “las casa de las rapidas”. In 1915 production began of a totally manufactured Spanish Wertheim machine. Wertheim in Germany continued manufacturing machines until 1932 when the Wertheim family fled to Spain. Despite converting to Christianity from Judaism, they feared the political unrest in Germany during that time. Wertheim Spain became Rapida SA and was then the sole manufacturer of the Wertheim machines. The factory was managed by Karl Wertheim under the alias Carlos Vallin. The item is part of a donation that connected to domestic life in 1891 during the Victorian era. It is significant for connecting the Melbourne distributor of Wertheim sewing machines, Hugo Wertheim, to Victoria’s northwest district where the purchaser lived. It is also significant for connecting the Melbourne distributor to the importing of goods from the well-known German manufacturer of early domestic sewing machines, Joseph Wertheim.Book with pale blue cover and 19 double-sided printed pages stapled together. The book is an instruction manual for using and managing the Wertheim High Arm Sewing Machine and other similar models. It was published in Frankfurt, Germany, by Joseph Wertheim, the machines' manufacturer. The Australian distributor of the machines was Hugo Wertheim, 173 William Street, Melbourne. Circa 1891.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, wertheim, sewing machine, victorian era, sewing machine accessories, sewing machine instructions, wertheim instruction book, wertheim sewing machine and hapsburg piano depot, 23-7-1891, £6 6/-, mrs burrowes, burrumbeet, h. wertheim, wertheim sewing machines, domestic machines, dressmaking, home industry, fashion

Chauncey Jerome (1793–1868) was an American clock maker in the early to mid 19th century. He made a fortune selling his clocks, and his business grew quickly. Jerome was born in Canaan USA in 1793 son of a blacksmith and nail-maker. He began his career in Plymouth, making dials for long-case clocks where he learned all he could about clocks, particularly clock cases, and then went to New Jersey to make seven-foot cases for clocks mechanisms. In 1816 he went to work for Eli Terry making "Patent Shelf Clocks," learning how to make previously handmade cases using machinery. Deciding to go into business for himself, Jerome began to make cases, trading them to Terry for wooden movements. In 1822 Jerome moved his business to Bristol New Haven, opening a small shop with his brother Noble and began to produce a 30-hour and eight-day wooden clocks. By 1837 Jerome's company was selling more clocks than any of his competitors. A one-day wood-cased clock, which sold for six dollars had helped put the company on the map. A year later his company was selling that same clock for four dollars. The company also sold one line of clocks at a wholesale price of 75 cents and by 1841 the company was showing an annual profit of a whopping $35,000, primarily from the sale of its brass movements. In 1842 Jerome moved his clock-case manufacturing operation to St. John Street in New Haven. Three years later, following a fire that destroyed the Bristol plant, Jerome relocated the entire operation to Elm City factory. Enlarging the plant, the company soon became the largest industrial employer in the city, producing 150,000 clocks annually. In 1850 Jerome formed the Jerome Manufacturing Co. as a joint-stock company with Benedict & Burnham, brass manufacturers of Waterbury. In 1853 the company then became known as the New Haven Clock Co, producing 444,000 clocks and timepieces annually, then the largest clock maker in the world. Jerome's future should have been secure but in 1855 he bought out a failed Bridgeport clock company controlled by P.T. Barnum, which wiped him out financially, leaving the Jerome Manufacturing Co. bankrupt. Jerome never recovered from the loss. By his admission, he was a better inventor than a businessman. When Jerome went bankrupt in 1856 the New Haven Clock Company purchased the company. One of the primary benefits of Jerome purchasing New Haven in the first place was the good reputation of the Jerome brand and the network of companies that remained interested in selling its clocks. In England, Jerome & Co. Ltd. sold Jerome clocks for the New Haven company until 1904, when New Haven purchased the English firm outright. After his involvement with the New Haven Company in 1856, Jerome traveled from town to town, taking jobs where he could, often working for clock companies that had learned the business of clock making using Jerome's inventions. On returning to New Haven near the end of his life, he died, penniless, in 1868 at the age of 74. The company struggled on after Jerome's bankruptcy until after World War II, when the company endeavored to continue through disruptions caused by a takeover along with poor sales, finally having to fold its operations in 1960 a little more than 100 years after it had been founded. The item is significant as it is associated with Chauncey Jerome who had made a historic contribution to the clock making industry during the 19th century when he began to substitute brass mechanisms for wooden mechanisms in his clocks. This was said to be the greatest and most far-reaching contribution to the clock industry. Because of his discovery of stamping out clockwork gears rather than using castings, Jerome was producing the lowest-priced clocks in the world. That can only add to his significance as the major clock manufacture of the 19th century. Jerome may have made and lost, a fortune selling his clocks but was perhaps the most influential and creative person associated with the American clock business during the mid-19th century. Also, he had served his community as a legislator in 1834, a Presidential elector in 1852 and mayor of New Haven, Connecticut from 1854 to 1855.Clock, marine, in octagonal rosewood veneer case. Roman numerals to dial, has a seconds dial. 2 key-winding holes slow-to-Fast adjustment pin through dial. Small lever in lower edge of case activates a chime. "8 day, 8 inch, Lever Striking escarpment " Paper label on the back of the clock "Jerome & Co, New Haven, Conn" "Manufacturers of every variety of Office and Home Clocks and Time Pieces".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, clock, jerome & co, new haven, clock maker, chauncey jerome

This bottle came from the Warrnambool aerated waters factory of Reg Reeves. This factory in Koroit Street, Warrnambool was established in the 1860s as the Union Cordial Factory by John Davis and then bought by John Fletcher in 1885. Fletcher’s business continued until 1930 when it was bought by Ralph Reeves. Coming to Warrnambool about 1900, Ralph Reeves managed a Banyan Street cordial factory which had been established by John Rowley. Ralph Reeves bought a cordial business at Hamilton in 1916 and sold it in 1929 to concentrate on his Warrnambool cordial factory. Reeves was joined by his son Reg in Warrnambool and Reg operated the business from 1946 to 1972. The trade name of Reeves was still used after Reg Reeves died and continued on for some years. This bottle is of interest as an example of the soft drinks made at the Warrnambool aerated waters factory of Reg Reeves. Reg and his father Ralph operated a cordial business in Warrnambool for 40 years. Cordial manufacturing was an important industry in Warrnambool for over 100 years.This is a glass bottle with a long rounded body, a round base and a short rounded neck. The top of the bottle has a moulded glass open top and there is a cork stopper with a brown top to enable the bottle to be opened by turning. The stopper has the name of the manufacturer of the soft drink on it and there is a multi-coloured label pasted on to the side of the bottle. The name of the soft drinks manufacturer is also impressed into the glass on the side of the bottle. There are two small chips near the base of the bottle. Stopper: R.V.Reeves R.V.R. Bottle: Reeves Imitation Cordial Pineapple Artificially coloured &flavoured This food contains not more than 2 grains of sulphur dioxide to the pint R.J. Reeves Warrnambool ralph reeves, warrnambool, reg reeves, warrnambool, cordial manufacturers in warrnambool, history of warrnambool

Demi John previous catalogue number 83. The upper section is tan in colour and has the words ''PIERCE & PERRY WINE & SPIRIT MERCHANTS, BENDIGO'' stamped into the surface. A Bendigo Pottery manufacturer's stamp also appears on the side near the neck. It contains the words ''Bendigo Pottery Co. Epsom.'' The manufacturers' stamp also contains indistinguishable writing that may be the Potter's name? The base daimeter is approximately 15 cm and the height is approximately 25 cm.''PIERCE & PERRY, WINE & SPIRIT MERCHANTS, BENDIGO'' ''Bendigo Pottery Co. Epsom.''food technology, bottling, demi john

Glass perfume bottle in original (shaped) box. Main label has brand of perfume (''Azurea'') and name of manufacturer (L T Piver, Paris); label on neck has manufacturer's name; label of reverse (back) is the 'Marque de Fabrique' (L T Piver). . Glass stopper. Box is lined/padded (original??) and has printed paper covering on sides and top (flower motif). Bottle and box inscribed with a catalog number U26672 in ink.personal effects, containers, perfume

Book - 44 A5 pages + yellow card cover, centre stapled, titled "The Evolution of the British Electric Tramcar Trucks", by A, M Goodwyn. Published by the Tramway and Light Railway Society 1976 as part of the Walter Gratwicke Memorial Lecture. Has illustrations, discussed the history of the tramcar truck (or wheel sets or bogies), manufacturers and associated equipment. Has a list of acknowledgements, and a list of manufacturers (including overseas), type, date and UK locations where used. trams, tramways, trucks, bogies, manufacturing

A Yonex model T-7500 gold metal tennis racquet, with flattened double shaft, white plastic Yonex-branded shaft casing; and a handle wrapped in black leather. Manufacturer logo also appears on white plastic butt cap. Model label appears on shaft casing on reverse. Adhesive labels on base of head feature manufacturer name & logo. Materials: Metal, Plastic, Leather, Nylon, Adhesive tape, Adhesive labeltennis

A Wright & Ditson wood tennis racquet with solid convex throat. Rounded flat top head. Manufacturer name and country of origin printed across throat on obverse. Manufacturer's trademark/logo features across throat on reverse. Fine-grooved octagonal handle and leather end wrap. Indechipherable model name printed on crown on obverse. 'PATENT APPLIED FOR' inscribed on side of shaft. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Guttennis

A Spalding 'Nassau' model tennis racquet, featuring concave throat & fine-grooved octagonal wooden handle. String whipping and plastic reinforcement around shaft. Has a leather end wrap and leather butt cloth. Manufacturer and model name printed on throat on obverse, and manufacturer logo printed on throat on reverse. Logo also printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Vinyl, Ink, String, Leather, Plastictennis

A Spalding 'Galaxie' tennis racquet, with whipping around shoulders; leather handle grip; and, leather butt cap. Model name features on throat. Manufacturer's name features along base of head. Manufacturer's wreathed 'S' logo appears on lower shaft and and butt cap. Remains of original clear plastic packaging wrap still on handle. Materials: Wood, Glue, Metal, Lacquer, Nylon, Leather, Ink, Plastic, Adhesive tape, Fibretennis

Pale blue cardboard box with white (discoloured) and blue manufacturer's label adhered to front. Inside the box is a cardboard rest holding a glass syringe with metal point and hand grip. The plunger has a metal end, with a rubber or plastic plunge. The manufacturer's label records it as a Record type hypodermic syringe, an Everett Product, and distributed by the Amalgamated Dental Co Ltd of Melbourne and Sydney. Additional information on the label suggests it have been marketed as The Laminex.medicine, anaesthesia, hospital

Presumed to have been made by the family of Mrs. Jean Snow who donated this item. This is a classic example of the tradition of "making do" , of creating new uses for older items or bits of scrap. A pillow case made from four porridge bags which have been opened out and stitched together. The name of the porridge manufacturer is evident on the pillow case, Robert J Terry.Robert J Terry N D M B A N (Eng)pillow- case making-do depression-creativity

This washing machine is an early model hand machine which came from Allansford, near Warrnambool.This item is an interesting example of an early washing machine with its primitive and simple parts.This is a cylindrical galvanised metal tub mounted on a metal stand. It has a metal ring around the top of the tub and a wooden handle serving as the washing mechanism. The name of the manufacturer is stencilled on the side of the tub.QUEENS HEAD AUSTRALIAvintage household items, washing machine, mechanical washing machine, warrnambool history

This tie was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” which includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at the University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was a house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was a physician, surgeon and chemist. In 1926, he was appointed as the new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928. The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was a surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients in his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2-bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902. He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. This tie is significant for connecting Doctor Angus' surname with the Angus clan's tartan The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool.Tie; necktie, wool, "Angus" tartan of blue, black and red. It is made in Scotland from 100 per cent wool. The manufacturer's label is attached. The tie is part of the W.R. Angus Collection. "MADE IN SCOTLAND / 100 % NEW WOOL / SCOTLAND"w.r. angus, tie, necktie, menswear, men's accessories, tartan tie, scotish tie, flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, angus tartan, w.r. angus collection

Black wool felt beret with black nylon trim and tie tape. Royal Australian Corps of Signals cap badge. Black cloth lining with manufacturer's label and name / number label. Label "Beret Mnfrs Pty Ltd. Victoria. Australia. Size 6 3/4 " Name Tag "3162456 Dibben" hand writtenheadgear, beret

Originally this teaching model belonged to Prince Henry's hospital library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s.Teaching model- 3D Female Reproduction Organs on stand. Plastic. Demonstration model for the insertion of cervical diaphragm. Manufacturer: Ortho, New Jersey. Barcode label Monash Medical Centre Clayton.teaching model, anatomy, female reproduction organs

Metal badges - relief of a Melbourne X1 class, number 467 in a MMTB orange and cream with a orange roof, colour scheme. with an enamel gloss finish with a pin on the rear. No destination of manufacturer's details..trams, tramways, badges, x1 class, souvenirs

Used by students at BurnleyWooden handles direct a metal chassis with two tynes attached and two cast iron spoked wheels. Pulled by second person with rope attached. Stencil of manufacturer painted on wooden handles.MINTERN D.W.HOE burnley college of horticulture, hoe, pedestrian plough, hand plough

Small brass binoculars/opera glasses. Fixed width glasses with hand painted covers, which are worn with usage and difficult to discern the painted scene. Binoculars are not marked with manufacturers name, etc.

White cardboard box with white manufacturer's label with black and red printed text. Inside the box is a white plastic tray holding twelve (12) needles wrapped in white tissue paper.Stamped in black ink on underside of cardboard box: 85320Whypodermic, needle, syringe, dozen top, luer lock, top surgical, tokyo, japan

J. Mann and Sons was first established as a farm produce store in 1921. The range of products was extended in the 1930s and included groceries and hardware, as well as the first petrol bowser in Wodonga outside the store. After WWII, the premises were extended and the range of products continued to increase. In the 1960s the Mann Family opened a new supermarket in Wodonga, in addition to the hardware business, providing steel, plumbing and industrial supplies, and they employed over 100 people at one stage. With changes in the retail industry, the Mann Family sold the main hardware business to Bunnings and the steel and rural produce business to the Kelly brothers in 2006. Mercury Scales was founded in Thebarton, South Australia in 1946. The business experienced rapid growth, leading to its joining with A&D’s global organisation and evolving into A&D Mercury. IN 2023 A&D Weighing is an Australian leader in the supply of electronic weighing scales, balances, metal detectors, checkweighers and weighing systems. This model was approved on 13 February 1980. On 25 March 1988 approval to change the business name to A & D Mercury Pty Ltd was granted by the Australian National Standards Commission. A set of cast iron scales. The measurement on the balance arm is in kilograms. There are 2 trays suspended by chains. bas is fitted with a level indicator and four adjustable feet.On Manufacturer's plate: MERCURY SCALE CO. PTY. LTD. SCALE MANUFACTURERS THEBARTON, S. AUST. INSTRUMENT APPROVAL NUMBERS N.S.C 6/9A/109 M/C No. Q. 760253 CAP 101 kg MODEL No. 211 Cj. mann & sons, mercury scales, wodonga businesses

Ruston & Hornsby, later known as Ruston, was an industrial equipment manufacturer in Lincoln, England, the company's history going back to 1840. The company is best known as a manufacturer of narrow and standard gauge diesel locomotives and steam shovels. This photograph records early an early type of excavator used to construct drainage channels in rural Victoria.A black / white photograph / postcard of a man digging in a very large trench, probably a drainage channel, with an earth mover in the background. The machine has the name "RUSTON" on it.drainage-channel earth-moving-machinery

Ruston & Hornsby, later known as Ruston, was an industrial equipment manufacturer in Lincoln, England, the company's history going back to 1840. The company is best known as a manufacturer of narrow and standard gauge diesel locomotives and steam shovels. This photograph records early an early type of excavator used to construct drainage channels in rural Victoria.A black / white photograph / postcard of a man digging in a very large trench, probably a drainage channel, with an earth mover in the background. The machine has the name "RUSTON" on it. In the foreground is a man, dressed in a long dark coat, watching.agricultural-machinery drainage-channels ruston