In 1851 Moses Thomas purchased 400 acres, including a half mile frontage to the Plenty River, at Mernda (then known as Morang) where he operated a farm, inn and other business. In 1865 Moses Thomas was appointed Engineer, Clerk and Collector for the Morang District Road Board. In this role he would have been responsible for overseeing the collection of local property rates and the maintenance and construction of local roads and drains. Road District Boards were one of the earliest forms of local government in Victoria. The Morang or Upper Plenty Road District was established in 1862. It covered part of what is today Mernda, Doreen, South Morang, Mill Park and Bundoora. In 1875, the area merged with the Whittlesea Road District to form the Shire of Whittlesea. Moses Thomas briefly served as a Councillor with the Shire of Whittlesea until his death in 1878. Correspondence. Letter, paper, handwritten text with seal. Letter from James Ryan, Shire Secretary, Shire of Whittlesea to Mrs Moses Thomas on the death of Moses 18 May 1878.

Annual report of the Association for the Advancement of the Blind outlined activities and events over the year, including membership of 299, 1000 visits were paid during the year, the Public Works department erected a set of steps from the top of the cliff to the sands so that Home residents may be able to access the beach, Railway Permits will now also be honoured on the Prahran-Malvern Electric Tramway and Bay Excursion Steamers, a concert party toured to Egerton, Ballan, Bacchus Marsh, Myrniong and Toolern Vale for the dual purpose of raising awareness and funds for the Association, Mr A Solomon has been appointed as a second Collector to visit Country Towns and with the support of the wife of the Minister for Public Works, Miss Aston and Miss Munce waited on the Lady Mayoress of Melbourne, gave her full support to organise a fund to purchase the land and buildings in Mair Street for the Association.1 volume of printed material with some illustrationsassociation for the advancement of the blind, annual reports

Three Cohn brothers, Jacob, Julius and Moritz came to Bendigo from Denmark in 1852. They were followed by their brother Solomon (Henry) in 1858. Jacob (1830-1911) married Rosa Levy in 1858 during a return trip to Denmark. Moritz (1822-1878) married Roschen Ballin in Germany in 1861. Julius (1828-1877) married Rosetta Spyer in Victoria in 1866. Henry (1826-1874) was married to Leah Fonseca.. Jacob, Moritz and Julius began the Victoria Brewery in Bridge Street in 1858, whilst Henry was described as a traveller and collector for Cohn Bros. in 1859. The brothers soon expanded into the making of cordials (soft drinks). In 1866 Henry took up a hotel in Sandridge (Port Melbourne). Moritz moved to Talbot and set up his own brewery before returning to Bendigo after Julius' death.Tablets of Memory - the Bendigo Cohns and their Descendants 1853-1989. By Alan A. Cohn, Jack M. Cohn, Lawrence J. Cohn.

Three Cohn brothers, Jacob, Julius and Moritz came to Bendigo from Denmark in 1852. They were followed by their brother Solomon (Henry) in 1858. Jacob (1830-1911) married Rosa Levy in 1858 during a return trip to Denmark. Moritz (1822-1878) married Roschen Ballin in Germany in 1861. Julius (1828-1877) married Rosetta Spyer in Victoria in 1866. Henry (1826-1874) was married to Leah Fonseca.. Jacob, Moritz and Julius began the Victoria Brewery in Bridge Street in 1858, whilst Henry was described as a traveller and collector for Cohn Bros. in 1859. The brothers soon expanded into the making of cordials (soft drinks). In 1866 Henry took up a hotel in Sandridge (Port Melbourne). Moritz moved to Talbot and set up his own brewery before returning to Bendigo after Julius' death.Clear small glass bottle. Drinks Cohns Cold, Quick to quench Cohns since 1857 on one side of the bottle on the other: bottle is not sold but remains the property of Cohn Bros. Limited. Net content 26 fl ozs. Preservative added, artificially coloured.bendigo, business, cohn bros

Original jewellery design for 'Britannia' pendant by Ernest Leviny, designed when he was living in London c1851, before travelling to the Australian goldfields of Castlemaine in late 1852. Leviny and his partner, Frederick Boocke, supplied jewellery designs to Watherston and Brogden in London. This design was made into a pendant by another London company, S.H. & D. Gass and was awarded a prize medal at the Great Exhibition of 1851 at the Crystal Palace in London. Leviny brought many of his original jewellery designs with him when he came out to Australia from Britain. See Schofield, Anne & Fahy, Kevin (1991), 'Australian jewellery: 19th and early 20th century'; Woodbridge, Suffolk, Antique Collectors Club, p. 39; Gere, Charalotte & Rudoe, Judy (2010), 'Jewellery in the Age of Queen Victoria', Pub.The British Museum p.340.This original jewellery design for the 'Britannia' pendant by noted colonial silversmith and jewellery, Ernest Leviny, is significant due to its link with the 'Britannia Pendant' awarded a prize medal at Great Exhibition of 1851, held at the Crystal Palace in London.Original jewellery design for a pendant featuring a standing woman (Britannia) holding a trident in her left hand and possible oar in her right hand, with Gothic style ornate pillars on each side and an archway overhead. Beneath the figure are three pearl drops. Drawn in pencil on grey card with gold ink highlights and red watercolour tinting.ernest leviny, jewellery, design, illustration, brittania, 1851, great exhibition of 1851

Yields information about a social welfare or friendly society part of the Ballarat Tramways - group who looked after their fellow workers through contributions. Gives the rules of the 'The Ballarat Tramways and SEC Benefit Fund'Sixteen page with light brown light weight card covers, centre stapled book titled "The Objects, Rules and Regulations of 'The Ballarat Tramways and SEC Benefit Fund." Details the committee, that it was approved by the Department of Social Services, name, objects, constitution, trustees, executive, collectors, meeting of members, members qualifications, benefits (in pounds), claims, unfinancial members, payment of claims, the Secretary, alteration to constitution and Order of business. Note the membership allowed for any SEC employee in the district. President J. Tucker Secretary and Treasurer - W. Cross Vice President L.Hoare and H. Gilbert Committee - R. Parrot, P.Egan, V.McCartin, B. Browne, S. Stevenson, T. Tonkin, J.Megee. Later version of Reg Item 3658, benefits similar, but contribution 1/6 - instead of 1/- per week. Noted on page 1 as being revised on 29/6/1963. Additional copy added 6/8/2016 from donation of T. Jeffreys. See also Reg Item 7134 for another version. Full scan of document added as a pdf file 5/6/2019.On front cover in ink "H.Knight", copy 2 - On top right hand corner of cover "A. Jeffreys" in blue ink.trams, tramways, social welfare, sickness, sec, ballarat

Ticket - light brown paper, "Combined Fare Ticket" - MMTB, over printed with a red 5d, and Ticket Number A B 425191. with conditions of travel on the front. On the rear is printed in red ink is an advert for B. Matthews Pty Ltd, with head office at 102-110 Toorak Road, South Yarra, advertising a Motor Funeral Service. Dean Filgate advised 24-12-2020: Unfortunately an un-used example, from the same block that most collectors obtained one for their collection ! There are genuine used examples of similar 6d (purple overprint) tickets, however I cannot find my "files" about these: there were at least two places this type of ticket was used in the early to mid-1930s. One was a "Combined Fare Ticket to and from the City via The Coburg Electric and Brunswick Cable Cars", the other was used on the Glen Huntly lines to enable passengers to pay only once for their journey to the City, as until 1934 trams from Glen Huntly Depot did not run direct to the City - you had to transfer trams at Elsternwick or Ripponlea.trams, tramways, melbourne, tickets, mmtb, advertisements

This tin or trunk came from the old Kepler Street, Warrnambol Tait legal offices. The tin originally held legal documents connected to John Hyland (1830-1908). Irish-born John Hyland came to the Warrnambool district in 1850 working as a mounted trooper and a rate collector. He then farmed in the Mortlake district for some years before returning to Warrnambool and setting up as an auctioneer and stock and station agent. He was a Warrnambool Councillor (1880s and 90s) and Mayor (1891-2). His trunk of legal documents was first held by the lawyer, Henry Parrington, operating in Warrnambool from 1888 to 1917 (1888-1900 Higgins and Parrington, 1900 Parrington and Tait, 1901-1917 Parrington). Following Hyland's death in 1908 Henry Parrington has used the tin to house his probate documents and when John Sym Tait purchased the Parrington practice in 1917 he has obviously taken over the Hyland trunk. This tin is of some considerable interest as a memento of past Warrnambool identities - John Hyland and Henry ParringtonThis is a metal tin, rectangular in shape. It has a ridged top, two metal handles and a key mechanism.John Hyland Esq. Parrington Probates & Deeds (keep)henry parrington warrnambool lawyer, john hyland warrnambool, john sym tait warrnambool lawyer

The Cambridge Glass Company was chartered in 1873 by a group of Cambridge, Ohio businessmen. But it was not until 1899, when the site was purchased by the newly formed National Glass Company, that funds became available to start the construction of this new glass factory. n 1901, The Cambridge Glass Company was organized by the owners of the National Glass Company of Pennsylvania Arthur J. Bennett, a native of England, was hired to manage this new factory. Having experience in the china and glass trades. Many of the patterns were of Mr. Bennett's own design. Sometime around 1903-1904 the company's first trademark came into being, the words "Near Cut" pressed into the glass. Cambridge Glass soon became known worldwide for quality in both "crystal and colours, pressed and blown’. 1984. The National Cambridge Collectors purchased many of the moulds, all of the etching/decorating plates and other assets of Cambridge Glass from Imperial. The Cambridge Glass factory building was demolished in 1989A shallow factory made, frosted green glass vase. The central "frog" is a figurine in the shape of a draped lady, with ten holes at her base to hold flowers. The lady's shape is poorly moulded, indistinct and would have been cheaply made. No Makers Mark. Appears to be similar to vases made by Cambridge Glass Co, Ohio, America, (1901 - 1958), during the Depression. glassware, cambridge glass company, ohio, bennett arthur j., orme wilber l., national glass company, pennsylvania, imperial glass company, bellaire, pioneers, early settlers, herron john, bentleigh, market gardeners, moorabbin, cheltenham

leni (1960s- ) Born Melbourne Wotjobaluk "leni is both a long story and a short life. A Wotjobaluk woman, born in Melbourne in the sixties, adopted into a non-Aboriginal family and raised by true destiny on country in the Wimmera. leni was reunited with her mother and extended family in her late teens. Simple swift sentences with complex challenging undertones. Thus began an ever evolving and endlessly deep cultural and personal exploration which has passionately consumed, confused, enticed and enriched her since. leni’s creativity is inspired strongly by her cross cultural heritage, learnings and loves, failures and fears, passions and dreamings. This artwork has its own determination and authenticity. leni’s work constantly explores concepts of the past and present. leni has exhibited in the Koorie Heritage Trust, The Convent Gallery, Kirret Barreet Gallery, Gallery on Sturt, Tussock Gallery and others. Her work has been commissioned by various organisations, public and private collectors.A triptych commissioned for the Federation University Mt Helen A-Building Staircase.aboriginal, abstract

leni (1960s- ) Born Melbourne Wotjobaluk "leni is both a long story and a short life. A Wotjobaluk woman, born in Melbourne in the sixties, adopted into a non-Aboriginal family and raised by true destiny on country in the Wimmera. leni was reunited with her mother and extended family in her late teens. Simple swift sentences with complex challenging undertones. Thus began an ever evolving and endlessly deep cultural and personal exploration which has passionately consumed, confused, enticed and enriched her since. leni’s creativity is inspired strongly by her cross cultural heritage, learnings and loves, failures and fears, passions and dreamings. This artwork has its own determination and authenticity. leni’s work constantly explores concepts of the past and present. leni has exhibited in the Koorie Heritage Trust, The Convent Gallery, Kirret Barreet Gallery, Gallery on Sturt, Tussock Gallery and others. Her work has been commissioned by various organisations, public and private collectors.aboriginal, aboriignal education centre collection

leni (1960s- ) Born Melbourne Wotjobaluk "leni is both a long story and a short life. A Wotjobaluk woman, born in Melbourne in the sixties, adopted into a non-Aboriginal family and raised by true destiny on country in the Wimmera. leni was reunited with her mother and extended family in her late teens. Simple swift sentences with complex challenging undertones. Thus began an ever evolving and endlessly deep cultural and personal exploration which has passionately consumed, confused, enticed and enriched her since. leni’s creativity is inspired strongly by her cross cultural heritage, learnings and loves, failures and fears, passions and dreamings. This artwork has its own determination and authenticity. leni’s work constantly explores concepts of the past and present. leni has exhibited in the Koorie Heritage Trust, The Convent Gallery, Kirret Barreet Gallery, Gallery on Sturt, Tussock Gallery and others. Her work has been commissioned by various organisations, public and private collectors.aboriginal, aboriginal education centre collection

leni (1960s- ) Born Melbourne Wotjobaluk "leni is both a long story and a short life. A Wotjobaluk woman, born in Melbourne in the sixties, adopted into a non-Aboriginal family and raised by true destiny on country in the Wimmera. leni was reunited with her mother and extended family in her late teens. Simple swift sentences with complex challenging undertones. Thus began an ever evolving and endlessly deep cultural and personal exploration which has passionately consumed, confused, enticed and enriched her since. leni’s creativity is inspired strongly by her cross cultural heritage, learnings and loves, failures and fears, passions and dreamings. This artwork has its own determination and authenticity. leni’s work constantly explores concepts of the past and present. leni has exhibited in the Koorie Heritage Trust, The Convent Gallery, Kirret Barreet Gallery, Gallery on Sturt, Tussock Gallery and others. Her work has been commissioned by various organisations, public and private collectors.aboriginal, aboriginal education centre collection

Yields information about a social welfare or friendly society part of the Ballarat Tramways - group who looked after their fellow workers through contributions. Gives the rules of the 'The Ballarat Tramways and SEC Benefit Fund'Sixteen page with light brown light weight card covers, centre stapled book titled "The Objects, Rules and Regulations of 'The Ballarat Tramways and SEC Benefit Fund." Details the committee, that it was approved by the Department of Social Services, name, objects, constitution, trustees, executive, collectors, meeting of members, members qualifications, benefits (in pounds), claims, unfinancial members, payment of claims, the Secretary, alteration to constitution and Order of business. Note the membership allowed for any SEC employee in the district. President J. Young Secretary and Treasurer - R. McLannan Vice President A. Johnston and H. Knight Committee - R McLannan, H. Gilbert, A. Johnson, G. Millar, P. Hubbard, D. McLeod, L.Hoare, W. Edwards, W. Lyons, J. Young, H. Knight, E. Cartledge, T. Duke, W. Waight, C. Foster. Has a Alteration to the Rules, pasted into the inside front cover. No date. Document has the date Jan 24, 1947. Few of the committee names appear in the Employee data base, could be the original 1947 document, revised with the alteration. See also Reg item 3658 and 3657 for other versions. trams, tramways, social welfare, sickness, sec, ballarat

Yields information about a social welfare or friendly society part of the Ballarat Tramways - group who looked after their fellow workers through contributions. Gives the rules of the Ballarat Tramways and SEC Benefit Fund.Sixteen page with light brown light weight card covers, centre stapled book titled "The Objects, Rules and Regulations of 'The Ballarat Tramways and SEC Benefit Fund." Details the committee, that it was approved by the Department of Social Services, name, objects, constitution, trustees, executive, collectors, meeting of members, members qualifications, benefits (in pounds), claims, unfinancial members, payment of claims, the Secretary, alteration to constitution and Order of business. Note the membership allowed for any SEC employee in the district. President H. Knight Secretary and Treasurer - W. Cross Vice President F. Spielvogel and J. Tucker Committee - C. Phillips, H.Gilbert, A.Johnson, G. Millar, P.Hubbard, D.McLeod, L. Hoare, W.Edwards, W.Lyons, W.Cross, J.Young, H.Knight, E.Cartledge, T.Duke, W.Waight, S.Todd, V.McCartin. Dated - 24/1/1947- earlier version of Reg Item 3657, benefits similar, but contribution lower 1/- instead of 1/6 per week. This may See also Reg item 7134 for a similar document but with different committee membes and an alteration to the Rules. Full scan of document added as a pdf file 5/6/2019. On front cover in ink "D.Kellett"trams, tramways, social welfare, sickness, sec, ballarat

brighton, council, mayor, councillors, officers, brighton town hall, t. vincent, park ranger, j.n. clark, overseer, f. blackham, press, r.j. lawrence, bank manager, a. vogt, assistant, j. clementson, inspector, l.w.p baker, assistant town clerk, g.w. woodward, hallkeeper, g. marsh, curator, a.f. magill c.e., city engineer, w. turner, cr. w.e. briggs, dr w.c. mcclelland, health officer, cr c.h.j. pickett, c.h. livesey, rate collector, cr j.a. grant, cr. j.w. satchwell, cr p.a. oakley, j. ritson, librarian, cr c.a. hack, cr j. richards, cr h.e. hall, cr t. wilson, j.h. taylor, town clerk, cr. w.p. francis, cr j.b. grout j.p., cr h.e. pullman, g.h. jefferson, solicitor, miss d.m. grout, typist, d. thomas, office boy, peace and city year

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. The subject planes blade is designed to cut a groove and it's blade maker (M Gilmour) is not listed by collectors of vintage planes as a known plane makers of the 19th or 20th century.A vintage tool made by an unknown maker, this item was made commercially for firms and individuals who worked in wood and needed a tool that could produce an ornamental finish to timber. These profiled planes came in various shapes and sizes to achieve the required decorative finish. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Grooving PlaneM Gilmour stamped on bladewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, moulding plane, groove plane, joiners tools, hand plane, carpenters tools

A smoothing plane is a wood plane used for making a smooth surface to wood surfaces traditionally, these planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape or size required. The blade, or iron was likewise formed to the intended flat or level profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and smoothing planes for the full range of work to be performed. Large crown mouldings or smoothing plane surfaces required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This plane is a coffin pattern smoothing plane and is unmarked so the maker is unknown however it's design and patina indicate it was probably made in the mid to late 19th century and would be regarded as a vintage or antique item sought after today by collectors of vintage tools. A vintage tool made by an unknown maker, that was made commercially for firms and individuals who worked in wood and needed a tool that could produce a flat or level finish to timber. These types of planes came in various shapes and sizes to achieve the required finish to timber surfaces used in cabinet making. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools only. Smoothing Plane Coffin type Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath

Alfred Felton (8 November 1831 – 8 January 1904) lived at the Esplanade Hotel, St Kilda, from 1892 and died there in 1904. He was born in England and came to Australia in 1853 intending to search for gold. In 1867, having worked as a commission agent and dealer in merchandise, an importer and general dealer and a wholesale druggist, he went into partnership with Frederick Sheppard Grimwade and founded Felton Grimwade and Company, "wholesale druggists and manufacturing chemists". He was a keen collector of books and art. He never married, had no direct descendants and gave away considerable amounts to charity. When Felton died, he left the bulk of his fortune to the creation of a charitable foundation known as the Felton Bequest to support culture and the community, with half the funding benefiting Victorian charities (particularly those that support women and children) and the other half used to acquire and donate art works to the National Gallery of Victoria. The Felton Bequest has been responsible for 15,000 artworks in the National Gallery of Victoria and they are the core of the collection. colour photograph unmountedCity of St Kilda. Alfred Felton (1831-1904) Philanthropist, Industrialist, lived here 1892 - 1904, sponsored by ACI International Ltdfelton, alfred felton, the esplanade, hotel esplanade, espy, st kilda, plaques

Half page illustration from Punch p. 37. Two panel illustration by G.D. Armour titled 'Points of View' and subtitled 'The River as it Appears to the Winners of an Easy Race' showing starboard view of a straight four rowing erect and without obvious distress. Below 'As it Appears to the Losers of a Hard Race' showing closeup starboard stern quarter view of a straight four collapsed over their oars, with the surrounding scenery drawn in a wavy haze. Part of the Tom Weil Collection. Thomas E Weil is a very knowledgeable and respected collector of rowing memorabilia from all over the world. His extensive collection includes material from many years of the Oxford and Cambridge University Boat Race, and Henley Royal Regatta. He also lectures and writes on rowing history and is a Trustee of the River and Rowing Museum. River & Rowing Museum, Mill Meadows, Henley on Thames, Oxfordshire, RG9 1BF Telephone: 01491 415600 General enquiries: [email protected] of an Ink and watercolor painting of two rowing crews. Two panel copy of an illustration by G.D. Armour titled 'Points of View' and subtitled 'The River as it Appears to the Winners of an Easy Race' showing starboard view of a straight four rowing erect and without obvious distress. Below 'As it Appears to the Losers of a Hard Race' showing closeup starboard stern quarter view of a straight four collapsed over their oars, with the surrounding scenery drawn in a wavy haze.Points of view G.D. Armourcity of warrnambool rowing club, warrnambool rowing club, hopkins river warrnambool, hopkins river warrnambool, g.d. armou, 'points of view'

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland. (http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html)Black and white Bookplate made with the etching process featuring a nude woman in a spherical frame. The figure 08 appears on the sphere.Signed lower centre [illegible]keith wingrove memorial trust, bookplate, australian bookplate design awards, john gartner, printmaking - etching, nude, life drawing

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland.(http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html)Black and white print showing a domed gazebo with boat on a lake in the foreground and trees in the backgroundkeith wingrove memorial trust, bookplate, australian bookplate design awards, printmaking

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland.(http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html)Black and white print on buff paper showing nude woman sitting on a printing press with a globe of the world in the background .1) buff paper .2) buff paper (green)Pencil signature in the bottom right hand cornerkeith wingrove memorial trust, bookplate, australian bookplate design awards, printmaking

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland.(http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html) Book plate depicts a coin with profile of a woman's head. Foliage surrounds the bottom of the coin.43/100 with pencil signaturekeith wingrove memorial trust, bookplate, australian bookplate design awards, printmaking

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland.(http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html) Etching showing a bearded man with fur-lined hat and jacket. Includes one circle in each corner.Signaturekeith wingrove memorial trust, bookplate, australian bookplate design awards

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland.(http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html) Nude woman wearing sun glasses seated amongst foliage. One leg is raised and rests on the seat.Nonekeith wingrove memorial trust, bookplate, australian bookplate design awards, printmaking, nude

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland.(http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html) Robed, bearded figure holding tablet with Ex Libris engraved. Parchment with Latin print in background. Mirror image of J. Gartner printed beneath the parchment.J. Oliveira - 230 - 1990keith wingrove memorial trust, bookplate, australian bookplate design awards

John Gartner was a fine printer and publisher, an author, a noted philatelist, and also collector of Australian banknotes and coins. He was born on 16 July 1914 and was largely self-educated, leaving school at fourteen for work following the death of his father. Gartner developed a strong interest in the history of typography and printing and was apprenticed at the Advocate where his father had been a linotype operator. Aged 17, Gartner bought a hand press and some fonts of type, and in 1937 acquired a platen press from which he set and printed his private press books, published under the imprint of The Hawthorn Press. Gartner had a strong collection of Australian bookplates. He also looked at the work of artists overseas and commissioned personal plates. He subsequently built an international collection with preference for artists who printed from wood. His initial searches were in Belgium and Holland.(http://www3.slv.vic.gov.au/latrobejournal/issue/latrobe-84/t1-g-t7.html) Figure in robes, possibly an old man, reading and facing a cabinet with items including an hour glass on top. The cabinet is recessed within a brick-arched alcove. The scene has a black frame. J. Oliveira - 234 - 1990keith wingrove memorial trust, australian bookplate design awards, printmaking