Manufactured badge or employee pass - brass with nickel plate finish with a single hole in one side, engraved with the Metropolitan Transit Authority logo and the organisation name. A number has been stamped on the rear. Donor advised that these passes were issued to MTA Traffic Officers (see related documents). Pass numbers held: 47, 81, 98 and 182. No. 47 has a small metal key ring through badge as shown in the photograph. See also Reg Item 396 for another example.trams, tramways, tickets, mta, the met, badges, officers, passes

Badge or cap badge, nickel-plated brass? for MMTB caps - letters TB combined together. Has two metal lugs soldered onto the rear to enable it to be fixed to a cap. In the middle on the rear the manufacturer's name "STOKES" is stamped into the badge. 2nd copy added 1/12/2019 from donation of Wendy Medley 3rd copy added 5/9/2021 ex Ron Scholton. - Name of manufacturer - Stokes has been cast into badge rather than being stamped.trams, tramways, badges, cap badge, mmtb, uniforms, crews

Set of two tram crew number badges, used by MMTB drivers and conductors or other uniformed employees. .1 - "08" - made from two cast numbers fixed to a bar top and bottom - may have been part of a larger item, given to the left hand side of the item. Made by Stokes and Sons Melbourne. .2 - "3" - made from brass, gold plated? Has two small clips on the rear and fitted with two clips for fitting to a uniform.trams, tramways, mmtb, badges, crews, drivers, conductors, personnel

Manufactured coin dispenser for 1, 2, 5, 10, 20 and 50 cent coins, made from black, white plastic with metal springs under each white coin support plate. Held in position by three metal screws. Manufactured by BIPA Australia. Fitted with two openings at the rear so a leather or belt strap could be passed through. There are a number of 1, 2, 5, 10, 20, 3d, half penny and penny coins in the unit - for display purposes only, not collected.trams, tramways, fares, cash handling, tickets

Use to identify a tramway employee, involved in track repairs for the Prahran and Malvern Tramways Trust - PMTT. Made by Stokes and SonsDemonstrates the method of identifying PMTT Employees involved in track maintenance.Round pressed brass badge with the words "TRACKMAN" pressed into the centre of the badge, around the bottom portion of the badge, the number "10", with the P&MTT initials on the top part of the badge. Has a nickel-plated finish with the letters have been infilled with a red enamel paint. On the rear of the badge, two metal lugs have been soldered onto the badge to enable it to be worn on a uniform. Two copies held - second one No. "34" fitted with a leather button hole strap.badges, controllers, pmtt, track maintenance

John Holley No 1311 enlisted on 11.3.16 in D Coy 39th Batt AIF aged 24 years. Embarked for England 27.5.16. Transferred to the 8th Batt 15.9.16. Hospital with PUO 14.12.16. Hospital on 20.4.17 with sore feet. KIA France 16.4.18. PUO (Pyrexia unknown origin) Refer 2132.2P. .2) One star on a ribbon represented one son/husband lost in the War. John Holley had a younger brother Arthur who enlisted in WW11. Refer 2134..1) Medals, court mounted, set of (2) re J Holley. 1. War Medal 1914-19. 2. Victory Medal. .2) Mothers and Widows Ribbon, black length of ribbon with Rising Sun centre, under is "For Australia", at the top is a polished metal piece with a floral emblem, at the bottom is same metal piece with one brass 7 pronged star. Rear of the top plate is engraved with a number. .3) Small brownish coloured box that housed .2). ..1) "1311 Pte J Holley 8 BN A.I.F" .2) "32962"medals, military, history

Sgt Jack Grinton No 1043, 38th Batt AIF. Part of the Grinton collection which included hundreds of negatives and developed photos that he took during the War. Refer Cat No 1280 for service details. Refer 1317P, 1320P. .1) RSL membership badge, two figures in centre, crown at top with membership clip "75" denoting membership paid 1975. Brass plate, pin backing for clothing. .2) Badge, polished gold colour. Small map of Australia over oval shape with soldier in centre. Surrounding are scrolls and leaf arrangement. Engraved on rear. Attached to black silk material with 2 metal shields. .3) Black silk material ribbon with one metal shield as in .2..1) "V64223" .2) "Presented to Sgt JW Grinton from Tragowel friends for duty bravely done. Great War 1914-1918"numismatics - badges, societies-rsl, metalcraft-brass/copperware

All tramway platform crew were issued with a cap and were expected to wear it at all times. The number being the principal identification number for the public and Inspectors.Demonstrates uniform cap manufacture.Drivers/Conductors cap - navy blue cloth exterior, black cotton interior lining, with a plastic band at the front half of the cap terminating in two small MMTB metal buttons on either side, and black (green underside) plastic beak. Fitted with a MMTB badge and number 2975 - both nickel plated. Has two safety pins on the inside holding the number into position. Size 7 and 1/8. On inside clear plastic is a sheet of paper "To Ring Radio Centre". tramways, tram crews, mmtb, caps, hats

Harold Bakes obtained this item from the Hawthorn Line Depot of the P.M.G, at 385 Burwood Road Hawthorn,following up information provided by Stan Boreham..Hand operated petrol pump or bowserThis pump with tank and fittings and equipment is the property of VACUUM OIL CO PTY LTD V2946. on metal plate.on an alloy plate---Self measuring pump|G+B model 1-2179 14* 117704|manufactured by Gilbert + Barker Mfg Co Springfield Mass U.S.A.|important - Keep all Stuffing Boxes tight.transport, motor vehicles, machinery, pumps

The history of metal packaging began in Bohemia in the 1200s. Metal has been produced for a very long time. But the first metal used for packaging was tin. In particular, it was the process of tin plating that was invented in Bohemia. Before this no other metal was economically able to be used for packaging. Later, in 1667 Andrew Yarranton, and English engineer, and Ambrose Crowley brought the method to England. Here it was improved by ironmasters including Philip Foley. Then by 1697, John Hanbury had a rolling mill at Pontypool in South Wales. The method they developed involved rolling iron plates using cylinders. This process enabled more uniform blank plates to be produced than was possible by just hammering the tin. https://www.shilohplastics.com.au/history-of-metal-packaging/ Fuller's Earth is any clay material that has the capability to bleach or dissolve oil or other liquids without the use of harsh chemical treatment. Modern uses of Fuller's Earth include as absorbents for oil, grease, and animal waste (cat litter) and as a carrier for pesticides and fertilisers. Minor uses include filtering, clarifying, and decolorising; active and inactive ingredient in beauty products; and as a filler in paint, plaster, adhesives, and pharmaceuticals. Fulling is an important step in the production of woollen garments, and can be traced back to ancient times. Cuneiform texts from Mesopotamia mention a raw material, which was delivered to fullers for the finishing of cloth. https://en.wikipedia.org/wiki/Fuller%27s_earth The use of tin to protect and store items, revolutionised the world. Fuller's Earth is a widely used product.Container of cylindrical sheet metal with perforated lid, used by Duerdin and Sainsbury Ltd, Sellers of Franbert's Fuller's Earth. Colour printed paper deteriorating. ‘Nett Contents 3½ oz.’ Ingredients still inside.Tin very rusty.'Franbert's Fuller's Earth. For the Toilet and Nursery. Protects the skin & Improves the Complexion. Nett Contents 3½ oz.'flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tin, tin plating, containers

This photograph shows Ina Warren with Jack warren, Linda Warren and Cora Lynn. The photographer was Warren, Helena (1871-1962) who was a self-taught photographer who became both the local press correspondent and a producer of humorous trompe l'oeil postcard images. Helena Warren was a thirty-two year old settler living on a small mixed farm with her husband, William, at Newmerella, near Orbost in Gippsland, Victoria, when she bought her first camera, an Austral Box quarter-plate. Her family says she was entirely self-taught, like many women photographers who started out with nothing but the instructions on the packets of film and chemicals. In over fifty years practice she graduated from the total novice, who opened all her first mail order plates in bright sunlight and ruined them, to a competent photographer who became both the local press correspondent and an inveterate producer of humorous trompe l’oeil postcard images. Helena Francis Warren (nee McKeown) was married to William John Warren and lived in Newmerella. She supplied the photos for the Back-To-Orbost celebration book in 1937 and also designed the Back-To-Orbost badge. She was known for her soft toy making. (by Ivy Rodwell in from Personalities and Stories of the Early Orbost District by Mary Gilbert). This photograph has significance in its association with Helen Frances Warren, a popular Orbost identity who was well known as an accomplished photographer and needleworker,A black / white photograph of a woman with three small children sitting in a pumpkin on water . There are small flags (Australian and British) at each end. On the pumpkin is "HMAS ORBOST".pumpkins-orbost warren-helena-photographer

This photograph shows Percy De Forest and his brother, Alfred of McLeod Street, Orbost. The photographer was Warren, Helena (1871-1962) who was a self-taught photographer who became both the local press correspondent and a producer of humorous trompe l'oeil postcard images. Helena Warren was a thirty-two year old settler living on a small mixed farm with her husband, William, at Newmerella, near Orbost in Gippsland, Victoria, when she bought her first camera, an Austral Box quarter-plate. Her family says she was entirely self-taught, like many women photographers who started out with nothing but the instructions on the packets of film and chemicals. In over fifty years practice she graduated from the total novice, who opened all her first mail order plates in bright sunlight and ruined them, to a competent photographer who became both the local press correspondent and an inveterate producer of humorous trompe l’oeil postcard images. Helena Francis Warren (nee McKeown) was married to William John Warren and lived in Newmerella. She supplied the photos for the Back-To-Orbost celebration book in 1937 and also designed the Back-To-Orbost badge. She was known for her soft toy making. (by Ivy Rodwell in from Personalities and Stories of the Early Orbost District by Mary Gilbert). This photograph has significance in its association with Helen Frances Warren, a popular Orbost identity who was well known as an accomplished photographer and needleworker,Two black / white photograohs of two small children sitting in a large pumpkin on water.on front - An Orbost Pumpkinpumpkins-orbost de-forest warren-helena-photography

The photograph shows Linda Warren, Enid Eaton, Jim Trewin and Jim Nixon. The photographer was Warren, Helena (1871-1962) who was a self-taught photographer who became both the local press correspondent and a producer of humorous trompe l'oeil postcard images. Helena Warren was a thirty-two year old settler living on a small mixed farm with her husband, William, at Newmerella, near Orbost in Gippsland, Victoria, when she bought her first camera, an Austral Box quarter-plate. Her family says she was entirely self-taught, like many women photographers who started out with nothing but the instructions on the packets of film and chemicals. In over fifty years practice she graduated from the total novice, who opened all her first mail order plates in bright sunlight and ruined them, to a competent photographer who became both the local press correspondent and an inveterate producer of humorous trompe l’oeil postcard images. Helena Francis Warren (nee McKeown) was married to William John Warren and lived in Newmerella. She supplied the photos for the Back-To-Orbost celebration book in 1937 and also designed the Back-To-Orbost badge. She was known for her soft toy making. (by Ivy Rodwell in from Personalities and Stories of the Early Orbost District by Mary Gilbert). This photograph has significance in its association with Helen Frances Warren, a popular Orbost identity who was well known as an accomplished photographer and needleworker,A black / white photograph of a young girl on a horse pulling a group of children in a large pumkin. On the side of the pumpkin is "HMAS ORBOST"pumpkins-orbost warren-helena nixon-jim trewin-jim warren-linda eaton-enid

This photograph is of Percy Nixon, son of James Nixon and Alice Roberts Percy Nixon married Evelyn Harding. The photographer was Warren, Helena (1871-1962) who was a self-taught photographer who became both the local press correspondent and a producer of humorous trompe l'oeil postcard images. Helena Warren was a thirty-two year old settler living on a small mixed farm with her husband, William, at Newmerella, near Orbost in Gippsland, Victoria, when she bought her first camera, an Austral Box quarter-plate. Her family says she was entirely self-taught, like many women photographers who started out with nothing but the instructions on the packets of film and chemicals. In over fifty years practice she graduated from the total novice, who opened all her first mail order plates in bright sunlight and ruined them, to a competent photographer who became both the local press correspondent and an inveterate producer of humorous trompe l’oeil postcard images. Helena Francis Warren (nee McKeown) was married to William John Warren and lived in Newmerella. She supplied the photos for the Back-To-Orbost celebration book in 1937 and also designed the Back-To-Orbost badge. She was known for her soft toy making. (by Ivy Rodwell in from Personalities and Stories of the Early Orbost District by Mary Gilbert). This item is associated with a prominent Orbost family. George Nixon was the son of James and Alice Nixon. The Nixon families were among the earliest settlers on the Snowy River. This photograph also has significance in its association with Helen Frances Warren, a popular Orbost identity who was well known as an accomplished photographer and needleworker.A black / white photograph of a young boy standing next to a very large pumpkin. His right arm is resting on the top.pumpkins-orbost warren-helena-photography nixon-percy

9NBH - Excursion Car NBH SECOND-CLASS EXCURSION CAR. The H was recognising their use for "Holiday" traffic. 15 of these cars were built in 1919 and numbered 1-15. Two more were built in 1981, and numbered 16 & 17. Two extended versions for wheelchair passengers were built in 1981 & 1983. These were numbered 51 & 52 - a separate number series due to the different type of vehicle. Six, numbered 18-23, were built in 1997-98. These had steel frames, padded seats, and a wide "window sill". At first glance they look the same as the previous NBHs. There are other minor construction differences due to the use of steel framing. 18NBH entered traffic 19/4/1997; 19NBH on 5/12/1997; 20NBH on 19/12/1997, the others added in 1998. VR Service History : 8/12/1919 NWS Built new VR Service History *NBH 9.VA - 8/12/1919 NWS Built new - / 6/1928 - Modified AC Malco BO circa 1955 - Condemned - Puffing Billy Service History or Notes 8 Dec 1919 - Nos 7 to 15 NBH (new) delivered to UPPER FERN TREE GULLY after this date. Aug 2016 - Tread plates replaced Sept 2016 - Tread plates replacedHistoric - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Excursion Car9 NBH - Passenger Carriage - Excursion Car made of wrought iron and timber9NBHpuffing billy railway, pbr, rolling stock , 9nbh, victorian railways narrow gauge - passenger rolling stock,, victorian railways, nbh - excursion car

This drum carder was purchase by Gill Stange at the Whittlesea Show in the late 1980s. The carder allowed Gill to spin fleece from her own Merino sheep. Merino is a difficult wool to spin when compared to other popular varieties, such as Corriedale or crossbred wool. The carder helped her to tease out the fleece, slightly separating the fibres before spinning. It also allowed for easier removal of foreign matters, such as seeds and mud. Little is known about the Kacoonda brand who produced the carder. They were Australian based and appear to have only operated throughout the 1980s.The carder has one large central roller with two smaller rollers on either side. The larger roller rotates in the inverse direction of the two smaller rollers. The carding cloth is a mint green in which closely spaced wire pins are embedded. The shape, length, diameter, and spacing of these wire pins is that of a standard carder. On one side of the carder a handle is found that is used to spin the three rollers. Additionally on this side is a sticker which reads “The Kacoonda Carder. Subject to Patent Action”. A Silver grip for the easy movement of the carder can also be found high on this side. On the opposite side of the carder, many nuts and plates can be found which hold the rollers in place. This is opposed to the other side of the carder, which has a brown plastic cover plate attached underneath the handle. The walls providing a path for the carded wool to follow when being carded, are made of wood. The carder comes complete with a teasing tool. This tool has the same mint green carding cloth as the carder’s rollers. It is attached to a simple wood handle for ease of use.Wording, green, printed. Sticker on side of carder. “The Kacoonda Carder / SUBJECT TO PATENT ACTION”whittlesea show, drum carder, textile production, carding wool, kacoonda

This pump is an Ajax Type L2 Series A model, made and sold by McPherson’s Pty Ltd of Melbourne circa 1930’s to 1940’s, is a mechanical, hand operated, constant flow pressure pump. It would have been used to pump fluids from one area to another, for example from a dam to a tank or used as a bilge pump on a small vessel, mounted on the vessel’s bulkhead, floor or deck. This type of hand pump is sometimes called a ‘Reciprocating Suction Pump’. It has a mechanical pumping action of the lever moves the piston inside the pump up and down. The water is lifted from below the pump through the inlet pipe and into the pump’s cylinder. This action causes the lower valve to close and the piston’s valve opens and the pressure within the pump forces the water out of the pump through the exit pipe. The limitation of this type of pump is that it can only raise the water a maximum of about 7 metres from beneath the ground and yields 24-26 Litres per minute. This type of pump could be used for many purposes such as pumping water or fuel. McPherson’s 1940’s advertisement proclaims “For all jobs on the land – irrigation, spraying, tank, plumbing, fire-fighting – there’s a suitable “Ajax” pump. Send us the details of you pumping problem. Our Expert’s advice will help you choose the right pump – the one that will give you most years of PROFITABLE PUMPING.” (The Australasian (Melbourne) Sat. 26th October 1940.) McPherson’s Pty Ltd, the manufacturer, advertised a similar pump to this one in The Australasian (Melbourne) in 1936, calling it the Ajax Double Acting Hand Pump. In 1942 another advertisement advised that a representative for a fire-fighting equipment supplier was visiting the western district of Victoria. The company could now supply double-action two-spray Ajax pumps at lower prices than similar pumps the district had recently purchased from Adelaide. McPHERSON’S FOUNDER and COMPANY TIMELINE 1860 – Thomas McPherson, a Scottish immigrant (c. 1853 ), founded McPherson’s in Melbourne, supplying pig iron (lead ingots imported as ballast in ships) to local manufacturers. 1882 – Thomas McPherson established a warehouse in Collins St Melbourne and included tools, steam fittings and machinery in his wares. The business expanded to include steam saw mills and became known as Thomas McPherson and Sons (William Murray and Edward). 1888 – Thomas passed away and his sons inherited the business. In 1896 William Murray became the sole proprietor after his brother Edward’s death. 1900 – The firm expanded, establishing Acme Bolt Company to manufacture nuts and bolts. 1912 – McPhersons Pty Ltd established a machinery warehouse and showroom in 554-556 Collins St Melbourne. McPherson’s went on to establish branches in Sydney (1911), Adelaide (1921) and Perth (1930) 1917 - McPherson’s supplied ‘dog spikes’ for the transcontinental railway, running from Eastern to Western Australia. 1918 – A tool works set up in Kensington, Melbourne, manufacturing Macson lathes and made machine tools that previously had to be imported. 1924 – The Bolt Works was transferred to a new building in Melbourne. McPhersons began making pumps. 1929 – McPherson retired. His son (Sir) William Edward McPherson (known as ‘WE’), was born in Hawthorne, Melbourne, in 1898. After his education he began work in his father’s Melbourne hardware and machinery business He took over as governing director when his father retired. 1929-1932 – McPherson’s supplied thousands of tons of rivets from its Richmond (Melbourne) Bolt Works for the construction of the Sydney Harbour Bridge. 1936 – McPherson’s Pty Ltd is advertising Ajax Pumps in newspapers 1934 – McPhersons purchased the property adjoining the warehouse in Collins Street, and during 1935-1936 built a new office and showrooms on the site of 546-445 Collins St. 1939 - McPherson’s acquired the Tool Equipment Co. Pty. Ltd and Associated Machine Tools Australia Pty Ltd was formed to separate McPherson’s machine-tool manufacturing and merchandising interests. 1939 – Ajax Pump Works, a foundry and pump manufacturing plant, was established in Tottenham, Melbourne, and the Ajax Bolt and Rivet Co Pty Ltd began manufacturing in New Zealand. 1944 - McPherson’s became a public company, McPherson’s Ltd. 1948 - The Ajax Pump Foundry opened at Kyneton, Victoria and in the post war years it grew to became a large manufacturer. 1980’s – Ajax Pumps brochure lists the address as 6 Buckhurst St, South Melbourne, Vic 3205 with the Telephone number 03 669 3588 1988 - Ajax Pumps acquired the Forrers Company, which was established in 1921. Manufacturing in Ipswich, Queensland, specialising in submersible sewage pumps. 1991 – KSB Ajax was formed, bringing together the companies KSB and Ajax Pumps 1993 – Manufacturing was moved to state-of-the-art premises in Tottenham, Victoria 2001 - The Forrers facility was moved to Tottenham. 2007 - Company name KSB Ajax Pumps was changed to KSB Australia Pty Ltd. 2009 - KSB Australia opened a branch in Townsville, Queensland. 2011 - KSB Australia moved to its dedicated Water and Waste Water Competence Centre in Bundamba, Queensland. DISPLAY OF THIS AJAX PUMP This pump was installed at Flagstaff Hill Maritime Village as part of a working display in the village by the Friends of Flagstaff Hill, in acknowledgement of the dedicated involvement of one of its long serving members, Bob Crossman. The display was officially opened 31st March 2018 and incorporates a restored Furphy Tank and Water Pipe Stand. The pump is used to draw water from the lake, through the water stand pipe and into the reconditioned Furphy Tank. This Ajax pump made by McPherson’s Pty Ltd is significant for its association with McPherson’s, a prominent manufacturer of hardware in Victoria. McPherson’s is famous for supplying ‘dog-spikes’ for the transcontinental railway (eastern to western Australia, 1917) and rivets for the Sydney Harbour Bridge (1929-1932). The Ajax pump is also of significance because of its association with McPherson’s Governing Director (Sir) William McPherson, former premier and treasurer in Victoria 1928-1929. The former McPherson’s Pty Ltd building in Collins Street Melbourne is now on the Victorian Heritage Register VHR H0942 This pump is representative of mechanical pumps popular in the early to mid-1900’s and still used today. Hand operated pressure pump, double acting. Cast metal case, painted red, with steel hose attachments and long metal lever. Pump is bolted to wooden plank. Model of pump is AJAX, Type L2, Series A pump. Embossed on lower section of pump "L2 - 10", "L2 - -1", "AJAX" “(?) –2-1” Embossed on lower handle “3-7” “L – 4” Embossed on attached plate “FOR SPARE PARTS / TYPE L2 / SERIES A / PUMP ASSEMBLED BY T R” Manufactured by McPherson’s Pty Ltd of Melbourne circa 1930’s - 1940’s.flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ajax pump works tottenham melbourne, ajax pump factory kyneton, william edward mcpherson, thomas mcpherson of melbourne, mcpherson’s pty ltd melbourne, acme bolt company, tool equipment co. pty. ltd, associated machine tools australia pty ltd, ajax bolt and rivet co. pty ltd new zealand, forrers company ipswich queensland, ksb ajax pumps, ksb australia pty ltd, macson lathes, tool manufacturer early to mid- 20th century, ajax double acting hand pump, ajax type l2 series a pump, qisjax pumps, water pump 1940’s, fuel pump 1940’s, hand operated constant flow pressure pump, reciprocating suction pump, agricultural hand pump, plumber’s hand pump, portable hand pump

Cdo Assoc Victoria presented it to Exmouth Heavy AA Assoc. This was because the Krait left Exmouth on the successful Opn Jaywick raid on Japanese occupied Singapore Harbour in 1943. Exmouth Heavy AAA has now disbanded and daughter of a foundation member donated it back to the (post-WW2) Vic Cdo Assoc in July 2012.The former Japanese fishing boat, as MV Krait left Exmouth on the successful Opn Jaywick raid on Japanese occupied Singapore harbour in 1943. The vessel was partly restored, and motored into Sydney harbour in 1964 with former Z Special members on board, including the Jaywick operatives Berryman, Carse, Jones and Young. Black wooden frame with gold-painted border. Photo has large white borders. Black and white photograph of the WW2 Krait of Operation Jaywick fame, on Sydney Harbour in 1964 with crew members and four former Jaywick operatives on board - Berryman, Carse, Jones and Young. Legend: October 1972 Presented to EXMOUTH HEAVY ANTI AIRCRAFT ASSOCIATION by the VICTORIAN COMMANDO ASSOCIATION. Four original crew members standing at forward well deck 1964. L to R Moss Berryman, Horrie Young, Ted Carse & Joe Jones. Brass plate on frame: "KRAIT." On back: "Barilyn Images 59 85 4666."japanese fishing boat mv krait exmouth operation jaywick singapore harbour z special berryman carse jones young.

Unit badge mounted on wooden plaqueBadge - Square on blue background surrounded by the words (left) National 51, (top) Servicemen's, (right) Association 72, (bottom) Navy Army Airforce. (Central) Over map of Australia are the crown, crossed swords, eagle, anchor. Plate below badge reads - Eastern and Yarra Valley/ Sub-Branch/ Chartered 29 November 1998

In a "LED HORSE" category, the horse is presented bridled and unsaddled. The handler leads the horse in clockwise direction on the circle. The horse is required to walk and trot and stand to be judged. The judge looks for correct conformation of the horse as well as ahorse that is neatly presented and in good condition. Straight movement, correctness and quality of paces and obedience of the horse are also taken into consideration. This trophy was sponsored by Manns of Wodonga. The Mann family operated a major business in Wodonga for 85 years, beginning with a produce store in February 1921. It expanded to become one of Australia’s largest regional shopping centres, with a Supermarket, Hardware Store, Steel Store, Plumbing and Industrial supplies store, at one stage employing well over 100 people. The Mann Family sold the business in 2006.This item has local significance as it records winners in equestrian events at the Wodonga Show. The award was also presented by a prominent citizen of Wodonga.A wooden shield with metal plaques engraved with names and year of competition winners for the Supreme Champion Led horse at the Wodonga Show.On gold toned banner at top: "Manns of Wodonga" On bottom plate: Supreme Champion/ Led Horse of / the Wodonga Show" On smaller shields: "1976/MISS M McINTYRE/ GREEN VALLEY/CALYPSO", "1977 /MISS M McINTYRE/BIRRAHLEE LONICERA" , "1978/J. VINGE/ HILLINVIEW/BLACK PANTHER" , "1979/MRS A. WILKINSON/SWEET SUE"equestrian events wodonga show, wodonga show, supreme champion led horse, mann wodonga

Illustrated hardcover book with red brown cover. Title and authors name embossed in gold on front cover and spinenon-fictionHistory of Alfred Hospital Melbournealfred hospital, ahnl, nursing history, melbourne, prahan

Mary Ann Willis is a member of The Orbost Nixon family and as a child spent time in Orbost. Mrs Marion Dwyer held office at Bairnsdale Golf Club and the East Gippsland Golf Associates Association for many years, being honoured with Life Membership from both. She was also a member of the YGLU (now Golf Victoria) council for 10 years. Mrs Dwyer won a number of titles including: Victorian Country Champion 9 times, Victorian Veteran Champion 3 times, Gippsland Champion 13 times, East Gippsland Champion 16 times, East Gippsland Foursomes' Champion 2 times, Bairnsdale Golf Club Ladies Champion 32 times, Bairnsdale Golf Club Foursomes' Champion 4 times & 106 single tournaments.A large book with a black cover. Book written by Mary Ann Willis. Contains poetry and articles including an oral history of Marion Dwyer. willis-maryann literature dwyer-marion nixon-family orbost

This bag belonged to Harry Perry and was donated by his son Trevor Perry. Harry Perry was the son of Jacob Perry, Shire Councillor, a farmer and Boer war veteran. Harry Perry's father, Jacob Perry, was a member of the inaugural Orbost Bowling Club. The Bowling Club was founded in 1929, by a group of farmers and businessmen. They set about providing a sporting icon for the town. Six rinks were constructed on the current site using horse drawn scoops and drags. The "Back to Orbost” 1937 book, describes the greens as "a bit rough for the first two seasons but now compare favourably with most country greens". Funds for the construction were raised by the issue of debentures at £5 each, and subscriptions were £1/1s/0d ($2.10). (info. Margaret Smith)Lawn bowling” is an outdoor game that has been popular for centuries. Bowling clubs play a significant role in community recreation needs. Members of the Perry family were inaugural members of the Orbost Bowling Club.A brown leather bowls bag. It has a zipper around the sides and metal studs on the bottom. There are carrying straps at the top.bag personal-effects bowling-bag recreation sport perry-harry

Newspaper article 'New Bialik Wing', published in unknown newspaper, 21 March 1969. " 'New Bialik Wing' Veteran Zionist leader Mr. Samuel Wynn will officially open the new, ultra modern block of classrooms and amenities at Bialik College, Hawthorn, this Sunday, March 23, at 11.00am. Daring in design by today's architectural standards for school buildings, the two storied unit contains four classrooms. Each room is constructed to receive the maximum of light from windows and special overhead skylights and is fully carpeted throughout to obviate noise.The classrooms are accommodating no more than thirty children in each room, to achieve the maximum individual attention for each child.The unit will open for inspection at 11.00 a.m. to be followed by the official opening and refreshments. There will be no appeal.donors, community, celebration, fundraising, buildings

The photograph shows Geelong No. 2, built by Duncan and Fraser of Adelaide in 1911 in its as-built configuration, c1920 at the Wharf terminus, known as the Moorabool Street Pier. The tram line was opened in 1912 and closed in 1940 when the track in Corio St was extended to the Beach terminus. There are a number of horse-drawn vehicles in the view with goods being loaded or unloaded on the ship moored on the right. The tramway was operated by the Melbourne Electric Supply Co. (MESCo). The photograph from the collection of Ken Magor was published in the Sydney Tramway Museum's magazine Trolley Wire in April 1981. The photo caption advises - "The steamship to the right is the Edina, a veteran Port Phillip steamer which was launched in 1854 and was not broken up until 1957." This tram is part of the collection at the Ballarat Tramway Museum.Yields information about Geelong No.2 and the Wharf terminus.Digital image of Geelong tram No. 2 at the Wharf terminus c1920. geelong, wharf, mesco, moorabool st pier, edina, tram 2

The Rockingham Red Cross Centre in Kew provided convalescence and rehabilitation for war veterans suffering nervous conditions resulting from the Second World War. The building had been given to the Australian Red Cross by the owner of the house, Mrs Syme in 1940. In the early days of the centre, patients performed plays for fellow patients and staff members. This small box of theatrical makeup, or greasepaint, would have been used at the Centre on one or more of these occasions. The donor, Rosemary Lade, worked at the Centre as an occupational therapist, 1971-2 and 1974-7. During these years, play readings were held, but performances were not staged. The Rockingham Red Cross Centre closed in 1977, and following its closure, the donor retrieved the box of greasepaints from the Occupational Therapy Department. A box of greasepaint from the Rockingham Red Cross Centre, Kew. Square wooden box, containing sticks of greasepaint used for theatrical makeup. The used sticks of greasepaint are wrapped in foiled paper, printed with information about the colour and the maker/retailer: L. Leichner (London) Ltd. Leichner House, 30/32 Acre Lane, / London, S.W.2. theatrical makeup, greasepaint, rockingham, rockingham red cross centre, syme family, rosemary lade, occupational therapy - theatre