This Minton floor tile is from the wreck of the LOCH ARD. Other examples of this manufacture have been recovered from the wreck site and form part of the collection at Flagstaff Hill. The iron-hulled clipper ship from the Loch Line was heading for Port Phillip from London when it ran into the cliffs of Mutton Bird Island near Port Campbell and was wrecked on the early morning of June 1, 1878. The LOCH ARD was laden with high-value cargo including luxury goods intended for display at the Melbourne International Exhibition in 1880. One notable survivor from the ship’s freight manifest was the well-packed Minton porcelain peacock, a two-metre-high ceramic masterpiece of vivid glazed colours. The almost total loss of life and property from the LOCH ARD registered as a shocking tragedy for the Colony of Victoria, at a time when social confidence and economic optimism were otherwise high. The wealth generated from gold and wool was increasingly being spent on magnificent private residences and imposing public buildings. The demand for quality furnishings and fittings was therefore strong. Among the products consigned to burgeoning colonial markets by the Milton Pottery at Stoke upon Trent were their new range of colourfully patterned but very durable floor tiles – ideal for the high-traffic spaces in the large civic buildings then being constructed in Australia and America. These new floor tiles were “encaustic”, meaning that their designs and colours were encased within the depth of the tile. Rather than their decorative patterns being glazed onto the surface of the tile, their inlaid designs were created during the manufacturing process, as “coloured slips” (or liquid clay) that were poured into a deep pre-moulded casting. When fired, the resulting tile was colour-fast and design-fast.The Minton encaustic floor tile is significant for its method of manufacture which makes it durable as well as decorative. The shipwreck of the LOCH ARD is of State significance. Victorian Heritage Register S417. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best-known shipwrecks in Victoria’s history.A square Minton floor tile with a black and beige pattern against a white base. This encaustic floor tile was recovered from the shipwreck of the LOCH ARD. On the back, or base, of the tile is inscribed the number “46” and the letters “Minton & Co Patent Stoke upon Trent”.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, mutton bird island, loch ard gorge, minton floor tile, encaustic tile, melbourne international exhibition, floor tile

Stoneware is a rather broad term for pottery or other ceramics that is fired at a relatively high temperature.  A modern technical definition is a vitreous or semi-vitreous ceramic made primarily from stoneware clay or non-refractory fire clay. Whether vitrified or not, it is non-porous, it may or may not be glazed. Historically, across the world, it has been developed after earthenware and before porcelain and has often been used for high-quality as well as utilitarian wares. As a rough guide, modern earthen wares are normally fired in a kiln at temperatures in the range of about 1,000°C (1,830 °F) to 1,200 °C (2,190 °F); stoneware's at between about 1,100 °C (2,010 °F) to 1,300 °C (2,370 °F); and porcelains at between about 1,200 °C (2,190 °F) to 1,400 °C (2,550 °F). Historically, reaching high temperatures was a long-lasting challenge, and temperatures somewhat below these were used for a long time. Earthenware can be fired effectively as low as 600°C, achievable in primitive pit firing, but 800 °C was more typical. Stoneware also needs certain types of clays, more specific than those able to make earthenware, but can be made from a much wider range than porcelain. A domestic item used to store food products as glazing makes the container non-porous, often used for pickling. Or larger containers for kitchen flour. Items age is difficult to determine given the same techniques for making stoneware are in use today. Stoneware containers were made by many potteries in Australia and England. They were in common domestic use before plastics were invented around 1940 to store goods so this subject item is probably from around 1900 to the 1940s. Item's significance is difficult to determine given it is not associated with a place, person, historic event, or manufacturer. Its significance lies with its use as a domestic object giving today a view into our social past.Stoneware circular container with wide opening, brown top and off white base. Handholds moulded on each side glazed finish, cracks in base.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, container, stoneware container, kitchen storage, kitchen ware

A tea strainer is a type of strainer that is placed over or in a teacup to catch tea leaves. When tea is brewed in the traditional manner in a teapot, the tea leaves are not contained in teabags, but rather are freely suspended in the water. As the leaves themselves may be distasteful, it is usual to filter them out with a tea strainer. Strainers usually fit into the top of the cup to catch the leaves as the tea is poured. Some deeper tea strainers can also be used to brew single cups of tea, much as teabags or brewing baskets are used - the strainer full of leaves is set in a cup to brew the tea, and then removed, along with the spent tea leaves, when the tea is ready to drink. By using a tea strainer in this way, the same leaves can be used to brew multiple cups. Tea strainer use declined in the 20th century with mass production of the tea bag, but is still preferred among connoisseurs who claim that keeping the leaves packed in a bag, rather than freely circulating, inhibits diffusion. Many assert that inferior ingredients, namely dust quality tea, are often used in tea bags. Tea strainers are usually either sterling silver, stainless steel, or china. Strainers often come in a set, with the strainer part and a small saucer for it to sit in between cups. Tea strainers in themselves have often been turned into artistic masterpieces of the silver- and goldsmith's craft, as well as rarer specimens of fine porcelain. Brewing baskets (or infusing baskets) resemble tea strainers, but are more typically put in the top of a teapot to contain the tea leaves during brewing. There is no definitive boundary between a brewing basket and a tea strainer, and the same tool might be used for both purposes. Tea strainers are also used by patients trying to pass a kidney stone. The patient urinates through the strainer, thereby ensuring that, if a stone is passed, it will be caught for evaluation and diagnosis. Source: www.wikipedia.net This item has historical significance in the evolution of Tea drinking.The Strainer being needed if a cup of tea was to be poured without tea leaves being present in the tea liquid.As Tea bags have been introduced into everyday life tea strainers are an item of the past. This particular tea strainer was an item for everyday useage.White enamel tea strainer, round in shape with flange edges, 7 small circle areas of perforations in the concave area of the utensil, a small perforated handle (same material) at one outer area of the item.domestic, kitchen, food, preparation, white, enamel, tea, strainer, beverage, perforated, utensil, round, flanges, leaves

Throughout the Nerrina district numerous areas of public land were set aside as school endowment plantations as part of various schools’ educational resources. The plantations were initially established to instil through community involvement a love of forests and an appreciation of their value, and in fact many of them are well suited for regular use as a teaching resource of this nature. It was expected that this use will increase as courses embracing various aspects of environmental science are developed. Many school plantations have been planted to radiata pine, and revenue from the sale of produce used to provide amenities required by the schools. In some cases, however, these plantations have not been very successful in providing revenue, as the sites are unsuitable for economic growth or the plantations are too small or the location too far from processing centres to allow economic harvesting. In some instances, radiata pine plantations have failed due to poor management. In 1982 the Land Conservation Council believed that all the existing plantations should be assessed in order to establish their value as a teaching resource. Those not needed or that are unsuitable for teaching purposes for some reason, such as their location, should be terminated. Those planted to radiata pine that have limited value as a teaching resource although satisfactory for wood production may continue to be used for such production, but should be reviewed when the pines are harvested. (http://www.veac.vic.gov.au/reports/354-Ballarat-Study-Area.pdf, acccessed 30/03/2017) The School Endowment Plantation Scheme was established in 1922 as a joint venture between the Education Department and the FCV. It was administered by the Education Department with technical supervision by the Commission. While some plantations were established on private land donated or leased for the purpose, most were established on Crown Lands or Reserved Forest made available, without cost, by the State. (https://www.victoriasforestryheritage.org.au/community/schools.html, accessed 26 September 2020)Covenant in the matter of the School Endowment Plantation of the School of Mines Ballarat School Community.nerrina pine plantation, ballarat school of mines endowment plantation, nerrina, pine plantation, nerrina, john r. lyall, richard w. richards, dick richards, edgar j. tippett, charles h. clamp, alfred k. mcbain, endowment plantation

The School Endowment Plantation Scheme was established in 1922 as a joint venture between the Education Department and the FCV. It was administered by the Education Department with technical supervision by the Commission. While some plantations were established on private land donated or leased for the purpose, most were established on Crown Lands or Reserved Forest made available, without cost, by the State. (https://www.victoriasforestryheritage.org.au/community/schools.html, accessed 26 September 2020) Throughout the Nerrina district numerous areas of public land were set aside as school endowment plantations as part of various schools’ educational resources. The plantations were initially established to instil through community involvement a love of forests and an appreciation of their value, and in fact many of them are well suited for regular use as a teaching resource of this nature. It was expected that this use will increase as courses embracing various aspects of environmental science are developed. Many school plantations have been planted to radiata pine, and revenue from the sale of produce used to provide amenities required by the schools. In some cases, however, these plantations have not been very successful in providing revenue, as the sites are unsuitable for economic growth or the plantations are too small or the location too far from processing centres to allow economic harvesting. In some instances, radiata pine plantations have failed due to poor management. In 1982 the Land Conservation Council believed that all the existing plantations should be assessed in order to establish their value as a teaching resource. Those not needed or that are unsuitable for teaching purposes for some reason, such as their location, should be terminated. Those planted to radiata pine that have limited value as a teaching resource although satisfactory for wood production may continue to be used for such production, but should be reviewed when the pines are harvested. (http://www.veac.vic.gov.au/reports/354-Ballarat-Study-Area.pdf, acccessed 30/03/2017)Covenant in the matter of the School Endowment Plantation of the Ballarat Junior Technical School Old Boys Association Endowment Plantation.pine plantation, alfred k. mcbain, g.w.e. pearson, i.c. garner, a.m. robinson, h.j. hassell, ballarat junior technical school old boys association endowment plantation, ballarat junior technical school, alumni

The School Endowment Plantation Scheme was established in 1922 as a joint venture between the Education Department and the FCV. It was administered by the Education Department with technical supervision by the Commission. While some plantations were established on private land donated or leased for the purpose, most were established on Crown Lands or Reserved Forest made available, without cost, by the State. (https://www.victoriasforestryheritage.org.au/community/schools.html, accessed 26 September 2020) Throughout the Nerrina district numerous areas of public land were set aside as school endowment plantations as part of various schools’ educational resources. The plantations were initially established to instil through community involvement a love of forests and an appreciation of their value, and in fact many of them are well suited for regular use as a teaching resource of this nature. It was expected that this use will increase as courses embracing various aspects of environmental science are developed. Many school plantations have been planted to radiata pine, and revenue from the sale of produce used to provide amenities required by the schools. In some cases, however, these plantations have not been very successful in providing revenue, as the sites are unsuitable for economic growth or the plantations are too small or the location too far from processing centres to allow economic harvesting. In some instances, radiata pine plantations have failed due to poor management. In 1982 the Land Conservation Council believed that all the existing plantations should be assessed in order to establish their value as a teaching resource. Those not needed or that are unsuitable for teaching purposes for some reason, such as their location, should be terminated. Those planted to radiata pine that have limited value as a teaching resource although satisfactory for wood production may continue to be used for such production, but should be reviewed when the pines are harvested. (http://www.veac.vic.gov.au/reports/354-Ballarat-Study-Area.pdf, acccessed 30/03/2017) Three A3 page covenant outlining the 35 acres of Crown Land in the Parish Of Ballarat, County of Grenville, to be granted under permissive occupancy for the establishment of a school plantation to be known as the Ballarat Technical School Endowment Plantation, and two letters relating to same, one on green paper. The Ballarat Technical School Endowment Plantation was at Vale Park, Ballarat. Vale Park is near Norman Street, Ballarat. pine plantation, ballarat junior technical school, alumni, ballarat technical school, ballarat technical school endowment plantation, harry s. gill, augustine f. hesiltine, william h. middleton, frederick brawn, william brazenor, a.w. steane, j.b. robinson, vale park, lindsay hillman, a.j. sutherland, oliver r. roberts, w.a. richardson, w.i. watson, j.g. hopwood, g.f. rumpff, e.j. dalker, john b. colbourn, jack r. collins

After marrying Ron Kirner, Joan Hood was known as Joan Kirner. She became the first female Premier of Victoria. “When I went out teaching, I went to Ballarat Girls Tech, where I met [husband] Ron who was at Ballarat Boys Tech. They were seen as tough schools, and I saw the disadvantage faced by these girls who were at the lowest of the low of the education rung – and yet there were some fantastic girls there who needed equal opportunity. So I think it was teaching that cemented in my mind that people don’t get an even go – and in particular girls. It didn’t take me too long to realise blokes were largely empowered. And it was teaching that cemented how equity and empowerment for women could be achieved through education.” Sarah Capper: You graduated from Melbourne University in 1958, and as mentioned, began work as a teacher in Ballarat. You married Ron in 1960 and received one of those government letters asking you to resign - JK: Yes, I think it burnt a hole in my pocket when I brought it home! We were both teachers, and I said to Ron, “Well, you got married – where’s your letter?!” That really clarified that the world wasn’t quite even, even in this profession that I’d always wanted and loved. I didn’t get superannuation – I think I got something like 100 pounds as pay in lieu of permanent service. And that wasn’t just me – that was a whole generation. Fancy that – that’s what it said – “pay in lieu of permanent service”. So that made me livid. If I hadn’t been a feminist before then, I certainly was by then. I realised the distribution of power was different for women and men. http://sheilas.org.au/2014/02/a-bonza-joan-kirner/, accessed 06/06/2015 Teacher Joan Hood (later Joan Kirner) is surrounded by a number of students from the Ballarat Girl's Technical School, all members of the Magazine Committee.joan hood, joan kirner, ballarat girls' technical school, university women, equal opportunity

This standard design life jacket was made by sailmakers Harry West Pty Ltd at Balmain, Sydney, New South Wales from 1930s to 1950s. Harry West - Harry was a chandler, sailmaker and rigger. He made and sold all kinds of canvas and rope goods including sails, awnings and covers. In 1925 he was advertising life buoys but by 1933 he was advertising life jackets. He and his wife Margery had six children. His business was still operating in 1954, when an article on the craft of sailmaking appeared in the Sydney Morning Herald. His sailmaker's loft was located, traditionally, close to Sydney's harbour. Life Jackets - Life jackets were part of the equipment carried by the Life Saving Rescue Crew of South Western Victoria, including Warrnambool, from around 1858 until the 1950s. The purpose of a life jacket is to keep the wearer afloat until he or she is rescued from the water. Life jackets were first invented in 1854 by Captain Ward of the Royal National Lifeboat Institution in Britain. The early life jackets were filled with cork, which is very buoyant. However, many times he cork caused the jacket to rise up quickly with a force that caused unconsciousness, sometimes turning the person face down in the water , causing them to drown. After the tragic loss of the ship RMS Titanic in 1912 and the lost lives of those onboard, a woman named Orpheus Newman designed the Salvus life jacket (Salvus means safe), which was filled with kapok instead of cork. Kapok comes from seed pods of the Ceiba Pentandra tree and is waterproof as well as buoyant. These Salvus jackets were used by the Royal Navy until new synthetic materials became available around the time of World War II.This life jacket is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Life jacket, canvas covered, with two kapok padded compartments joined by shoulder straps and waist ties. Designed to slip over the head and tie at the waist. Inscriptions on pouches, some stencilled, some hand written, and inspection text on shoulder strap. Made by Harry West Pty Ltd., Sailmakers, Balmain, Sydney.Stencilled on pockets: “- - - NDARD / LIFE JACKET” [STANDARD LIFE JACKET], “HARRY WEST PTY LTD / SAILMAKERS / BALMAIN, SYDNEY” Stamped on shoulder strap: "XM3271RC" Hand painted on pocket: “DAVIES”flagstaff hill maritime museum and village, flagstaff hill, maritime museum, maritime village, warrnambool, lady bay, warrnambool harbour, captain ward, royal national lifeboat instution, kapok, life jacket, orpheus newman, salvus jacket, life saving, rescue, rescue crew, l.s.r.c., life saving equipment, marine technology, lifeboat, shipwreck victim, vintage, harry west, balmain, sydney, davies, standard life jacket, survivor, shipwreck, sailmakers, harry west pty ltd

The origins of the pen rack probably began when quill pens were being replaced by steel nib pens that were held at oblique angles for writing this method of writing started to gain popularity around 1820-1860. To understand the development of display racks to hold pens on a desk we need to understand the development of the pen itself. Before the early 19th-century steel pens were almost universally all barrel pens affixed to a holder pretty permanently. Pens were also not disposable. There were even steel pen repair services, just like the same services around at the time to repair you're fine quills. Individual slip nib pens which fit into a holder were originally pieces of a quill which came in a box of nibs and fit into a holder. These were disposable and meant to obviate the need to mend your quills. By 1831 you start to see more what they called “slip nib pens” or “portable pens” (easier to carry than a long barrel pen), but the idea of holding the nib at an oblique angle in the holder was an idea new enough that it warranted a patent. In 1831, an enterprising and very successful stationer and inventor, Sampson Mordan (inventor of the silver mechanical pencil) combined with one William Brockedon to patent the first oblique pen and oblique holder. In the patent application, they mention as the benefits that this would allow the writer to hold the pen more comfortably as well as it should allow the pen to last longer since both tines will be moving across the paper evenly. It appears at the time the idea of holding a pen obliquely was new. As a result of the popularity of the oblique pen many different designs of pen desk holders were being made, to keep pens suspended on a rack alleviated the possibility that the expensive new steel nibs with their holder could be damaged if left in a desk draw with other items.Double sided Pen Rack, decorative metal with four metal legsflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This Sikes brass hydrometer was manufactured by the optical and scientific instrument makers Kasner & Moss of 17 Collins Street West, Melbourne, in the latter part of the nineteenth century. The firm adverted hydrometers, as well as optical instruments, as early as August 13th, 1864, in The Age, Melbourne. This hydrometer set was donated to Flagstaff Hill in 1979 by local wine and spirits merchants Lynch Bros of Fairy Street, Warrnambool. Giffen Russell had established the business in 1878, and Harry Lynch took it over in the 1930s, and after he passed away in 1953 Kevin Matthew Lynch became proprietor of K M Lynch Food and Liquor. The business closed in the 2010s. The hydrometer may date back to the establishment of the business in 1878, as Kasner & Moss were selling hydrometers in Melbourne from 1864. Hydrometers were used to measure the density, or relative density, of liquids from the late 1600s. In 1816 Bartholomew Sikes won the competition for the most useful accurate hydrometer. Hydrometers were commonly used by distillers, vintners, and brewers to establish accurate measures of alcohol concentration in their beverages. Following this manufacturing process, government inspectors and excise officers used them to check that the labelled indications of alcohol-proof were correct and that the right amounts of duty were being paid. This hydrometer and its fitted and hinged wooden container show signs of heavy and protracted use in a working environment. Although the instrument has some parts missing and has been recently repaired, the original quality of the inlaid box and the fine engraving on the instrument and the attachable weights, are indications of the hydrometer’s very real value when new. This Sikes hydrometer, bearing the maker's mark of “Kasner & Moss Melbourne” and the registered number “20373”, was presented to the purchasing public as a precision-made instrument designed for professional use. The Sikes hydrometer is of local significance because of its implied association with the alcohol trade in the southwest region of Victoria. It was donated by a family member of Lynch Bros, a local licensed outlet for wines and spirits in the period before the general relaxation of liquor licensing laws in the State of Victoria. It may have belonged to Griffin Russell who established the liquor store in 1878.Hydrometer; original Sikes brass hydrometer in a polished wooden case with an inlaid plaque on the lid. The brass float is a sphere with a thin flat upper stem and a short, lower stem with a bulb-shaped end. The upper stem is engraved scale on both sides with the numbers 1 to 10, and five divisions between each number. There are ten fixed pegs in the base to secure the thick brass horseshoe-shaped, numbered, various-sized weights (20, 30, 40, 80, 90); the free pegs would have originally stored another five weights (10, 50, 60, 70, and 100). The empty compartment in the box suggests another part in the initial set, probably a thermometer. The fitted, fabric-lined box has two brass closures and two brass hinges. The scientific instrument shows signs of heavy use and repairs. The Serial Number on the float matches the Serial Numbers on the weights. The plaque on the lid, the float and the weights have inscriptions. Made by Kasner & Moss, Melbourne. Plaque: “SIKES HYDROMETER / KASNER & MOSS / MELBOURNE” On float's lower stem: “SIKES 20373” On one thin edge of the float's scale, engraved in script “Kasner & Moss” and stamped “MELBOURNE”, and symbol“P” rotated 90 degrees. On the opposite thin edge of the float: “N20.373”, “SIKES”, “I P % II O” (in ornate capitals). Each weight has s unique number, and the same serial number “20373”.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, sikes hydrometer, scientific instrument, pressure measurement, measuring instrument, ullage tool, customs, excise duty, tax, alcohol content, proof, calibrate, standard weights and measures, tariff, kasner & moss, scientific instrument makers, specific gravity, liquid density, alcohol testing, technology, alcohol measurement, proof spirit, wine and spirits merchants, local business, brass measuring instrument, k m lynch, giffen russell, harry lynch

This double-sheaved wooden ship’s block or pulley is a mechanical device used for lifting and moving heavy objects. It has two grooved wheels joined together, each with an axle between the cheeks or sides of the grooved wheel. Blocks and tackle are included in a ship’s rigging. These pulleys and ropes are used for the mechanical advantage they provide for lifting, moving and re-arranging the setting of the sails, which are very heavy work. Blocks are also used to load and unload the ship’s cargo. The FALLS of HALLADALE- The sailing ship Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barbed wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. The ship had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions.This artefact is important as it is an example of the materials and design of late-19th century ship’s rigging equipment. The object is also significant for its association with the historic sailing ship Falls of Halladale, wrecked in local waters in the early 20th century. The clipper ship Falls of Halladale shipwreck is of historical significance and is listed on the Victorian Heritage Register, No. S255. She was one of the last ships to sail the Trade Routes. She was one of the first vessels to have fore and aft lifting bridges. The vessel is an example of the remains of an international cargo ship and also represents aspects of Victoria’s shipping industry.Ship's block; a double-sheave wooden block with thick concretion on it. The rope block was recovered from the wreck of the sailing ship, Falls of Halladale.Noneflagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck coast, falls of halladale, shipwreck, peterborough, 1908 shipwreck, peterborough shipwreck, russell & co., greenock, wright breakenridge & co. glasgow, clipper ship, machine, mechanical advantage, block, wooden block, pulley, tackle, sheave, ship rigging, double-sheave, twin sheave, captain david wood thomson, iron ship, four-masted ship, sailing ship, windjammer, clyde, wright, breakenridge & co of glasgow, fore and aft lifting bridges

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains the last 7 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

This double-sheaved wooden ship’s block or pulley is a mechanical device used for lifting and moving heavy objects. It has two grooved wheels joined together, each with an axle between the cheeks or sides of the grooved wheel. Blocks and tackle are included in a ship’s rigging. These pulleys and ropes are used for the mechanical advantage they provide for lifting, moving and re-arranging the setting of the sails, which are very heavy work. Blocks are also used to load and unload the ship’s cargo. The FALLS of HALLADALE- The sailing ship Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barbed wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. The ship had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions.This artefact is important as it is an example of the materials and design of late-19th century ship’s rigging equipment. The object is also significant for its association with the historic sailing ship Falls of Halladale, wrecked in local waters in the early 20th century. The clipper ship Falls of Halladale shipwreck is of historical significance and is listed on the Victorian Heritage Register, No. S255. She was one of the last ships to sail the Trade Routes. She was one of the first vessels to have fore and aft lifting bridges. The vessel is an example of the remains of an international cargo ship and also represents aspects of Victoria’s shipping industry.Rope block, wooden double-sheave mechanical device with a short length of chain attached and remnants of the metal frame. It was recovered from the Falls of Halladale.Noneflagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck coast, falls of halladale, shipwreck, peterborough, 1908 shipwreck, peterborough shipwreck, russell & co., greenock, wright breakenridge & co. glasgow, clipper ship, block and rigging, ship’s block, iron ship, four-masted ship, sailing ship, windjammer, clyde, wright, breakenridge & co of glasgow, fore and aft lifting bridges, machine, mechanical advantage, block, wooden block, pulley, tackle, sheave, ship rigging, double-sheave, twin sheave, captain david wood thomson

The ES52 Kookaburra is a two seat high wing glider – sailplane of wooden construction designed by Harry Schneider and built Edmund Schneider Pty Ltd. It was first flown on 26 June 1954 and became the glider of choice for training new pilots of many gliding clubs around Australia in the 1950s, 1960s and 1970s. Several found there way to New Zealand. Further two kits were sent to Brazil and at least one of these was finished and flow successfully. The ES52 performed well with a glide ratio of about 22:1 and had soaring and cross-country capabilities. A notable feature of the ES52 design was the staggered side-by-side seating arrangement of the cockpit. This made for good in flight communication between instructor and trainee. Overall, thirty six were built by Edmund Schneider Pty Ltd. A longer wing version (the ES52B) was also introduced that had a better glide ratio (around 25:1). Five examples of this version were built. In Germany a modified ES52 was built incorporating a metal tube fuselage frame and with the addition of a engine driven propeller mounted on top of the wing which enabled the glider to be self launching. This museum collection item consists of the fuselage, tailplane, elevators, fin, rudder from the Mark I, ES 52 Kookaburra, formerly registered as VH-GFF and last owned by the Barcaldine and District Airsports Club of Queensland. The glider was in a damaged condition when it was acquired by the Museum. A decision was made by the Museum to repair the glider for display rather than endeavouring to restore it to an airworthy condition. The reconstruction of the wings is being undertaken by using parts of damaged ES 52 Kookaburra wings (as it happened from later ES 52 Marks). The Log Book for VH-GFF reveals operational life with a succession of gliding clubs around Australia. This exhibit will be of interest to gliding enthusiasts wishing to inspect the popular two seat club trainer of a by-gone era.This is a wood and fabric covered aircraft that is being rebuilt from the components of several aircraft as a non-flying exhibit.Fuselage marked with Edmund Schneider Pty Ltd Serial Number 9 and comes from the glider previously registered as VH-GFF.australian gliding, glider, sailplane, edmund schneider, es 52, kookaburra, barcaldine and district airsports club, victorian motorless flight group, alice springs gliding club, raaf richmond, raaf williamtown, gayndah gliding club, blackwater gliding club, southern downs aero and soaring club, charleville gliding club

The St. Moritz Ice Rink was a popular ice skating rink on The Esplanade, St. Kilda, Victoria. It operated between 1939–1981. As one of only two ice rinks in Melbourne in the 1940s and 1950s, it played a central role to the sport of ice hockey in Australia. Closed in 1982, it soon suffered a major fire and was then demolished, an event later seen as a major blow to the heritage of St Kilda. It was first built as the Wattle Path Palais de Danse in 1922, a very large dance hall, designed by architects Beaver & Purnell, The Wattle Path was the venue for the first all-Australian dance championship, and featured some of the best dance bands of Australia, as well as from America. Popular throughout the 1920s, it suffered due to the Great Depression, and closed in the early 1930s. From 1933-1936 the building became a film studio, Efftee Studios, for Frank W. Thring. In 1938, businessman Henry Hans "Harry" Kleiner announced that the Wattle Path would become an ice rink. He was sole proprietor until 1953, when he sold the business to J. Gordon and T. Molony, both champion skaters. Trade declined during the 1970s. The building was sold in 1980 to developers Hudson Conway and trucking magnate Lindsay Fox and was closed in early 1982. It was nominated to the Historic Buildings Preservation Council, but a majority of City of St Kilda councillors voted to oppose this action and uphold a demolition permit already issued. The building infamously suffered a fire later that year, leaving only the facades, which were demolished soon after. The site remained vacant until about 1991, when a mid-price hotel called the St Moritz was constructed. By 1993 it was simply called the Novotel St Kilda. The hotel closed in 2019 and was replaced by an apartment complex.black and white photographSt Moritz, St Kilda. Ice Skating. Caf�st moritz, st kilda, the esplanade, ice skating

Joeli Bulu was one of the first missionaries to Fiji. Not a Christian when he grew up but was converted after listening to John Thomas in Tonga. The king of Tonga had just been converted to Christianity and asked for volunteers to go to Fiji as a missionary. His reception in Fiji was not welcoming, but he was such a tenacious chap and because he was likeable he became one of the most influential missionaries in the South Pacific. He was a rascal as a young man in Tonga and the meeting with John Thomas was the thing that changed his life. Very well regarded now in Fiji. His active period was the 1838 to 1870 - John Thomas came to Tonga in 1826. From Wikipedia: Joeli Bulu (Siaoeli Pulu) (around 1810-May 1877) became a Christian in 1833. He was one of a band of Tongan teachers who came to Fiji in 1838, and pioneered the work of the Christian Church in this group. He served the Church in Fiji for almost four decades. He came to Lakeba by canoe, and was appointed to help with the printing of catachisms and passages of Scripture. Lorimer Fison translated Bulu's oral account of hislife. This was edited by George Stringer Rowe and printed in England in 1871 with the title, "Joel Bulu: The Autobiography of a Native Minister in the South Seas". He served first at Lakeba and then at Rewa, and after that the station was closed because of the wars, at Viwa. John Hunt sent him to investigate the possibilities of establishing the work in Vanua Levu, and to that field he was later appointed. He was the first Pacific Islander to be placed alone in charge of a circuit - Ono, in 1848, and also the first to be ordained (1850) as a Native Assistant Missionary. After this he served at Nadi (Vaua Levu), Bua and Cakaudrove where he pioneered the work before any white missionaries were established there. Afterwards he was appointed to Bau. He died in May 1877 and his grave is beside that of John Hunt at Viwa Island.B&W photo, no backing, print from The Argus files, dated 30 March 1933. Tongan beareded old man, wearing a traditional (Fijian vala or lap-lap) and carrying what looks like a fly swat, but is more significant than that. Dressed as a Fijian chief."Joeli Bulu" "1/2 col Argus" and "Return to Rev. A. W. Amos 148 Lonsdale St" all written in pencil on the back.bulu, joeli, tonga, fiji, thomas, john, lakeba, hunt, john

Sunshine High School existed in its own right from 1955 to 1991. During the early years the wearing of 'correct' uniforms was strictly enforced. Girls had to wear hats and boys had to wear caps as part of the uniform when outside the school grounds, or else they risked detention if caught without head wear by a Prefect. The boys therefore always had a rolled up cap in the back pocket to quickly slip on whenever there was danger of being nabbed by a Prefect. The girls had a winter uniform, which included thick beige stockings and a maroon blazer, and a summer frock in which they could be relatively cool during hot days. The boys had to wear their double breasted grey suits all year, with a jumper under the jacket in cold weather. The boys were supposedly being groomed as gentlemen, and so even during hot conditions were not allowed to remove their suit jackets in the class room. On about two very hot afternoons a year, the headmaster removed his jacket and so allowed the boys to do likewise. With single breasted suits becoming fashionable, it became difficult to find double breasted grey suits in the wide range of sizes required by students. In about late 1960 or early 1961 the uniform rules for boys were changed to enable them to wear single breasted grey suits. They still however were not allowed to remove their jackets in class on hot days. Over the years the rules for the wearing of uniforms were relaxed and in the late 1970's students were wearing either uniforms, or parts of uniforms, or their normal clothing. The wearing of uniforms at Sunshine High School eventually died out well before the School vacated the buildings on Ballarat Road, and amalgamated with other local secondary schools to form the Sunshine College.The three items of clothing, although not a complete uniform set, serve as a reminder of the summer and winter uniforms, as well as the colours, that were worn by the girls at Sunshine High School during the early years. The jumper is identical in appearance to that worn by the boys and so it is not difficult to imagine how a male Sunshine High School student would look like with a grey suit and that type of jumper.THREE ITEMS of girls uniform from the no longer existing SUNSHINE HIGH SCHOOL are individually displayed here. The items being: (1) Beige with maroon print cotton summer frock. (2) Maroon polyester/wool winter tunic. (3) Maroon V-necked wool/nylon jumper with light blue and gold coloured stripes around the cuffs and the neck.Ecole brand winter tunic. Buxwear brand summer frock of Style S289. M.G.Magree brand jumper.sunshine high school, uniform, frock, tunic, jumper, girls school uniform, maroon uniform

This reproduction photograph was donated at a major reunion in 2008, organised by students of the school from the 1950s. It pictures Mabel Molland and a young student at Monomeith, home to the school since 1956. Monomeith is a Victorian Heritage Register listed (VHR number H0452), italianate styled brick villa, built in 1887 for one of Williamstown’s most important identities, James Styles. Styles’ distinguished career in public life included membership of the Williamstown Council, a stint in state parliament as the Member for Williamstown (1894-1900) and, in 1901, election to the first commonwealth parliament as a senator. During the 1890s he was also a commissioner of both the Melbourne Harbour Trust and the Melbourne and Metropolitan Board of Works and one of the trustees of the Williamstown Grammar School. The property comprises the residence designed by W Bennett Hall and built by James Styles in 1887 and the former migrant hostel buildings (now administration and classrooms), erected around 1951 by the then owner the Melbourne Harbour Trust, and intended to house migrant workers during the dredging of Port Phillip Bay. By the 1950s, the School had outgrown its home at Holy Trinity Hall and Mabel Molland reached out to Mr. Keith White, president of the Parent's Association and well-respected member of Williamstown Council for assistance. In 1956, following lengthy negotiations led by Mr. White, Monomeith was leased from the Melbourne Harbour Trust under a seven-year lease, which eventuated as a twenty-one year lease, followed by purchase of the property in 1972. Since then this historic building has come to be a much-loved symbol of the history of Westbourne Grammar School. This is a rare image of Mabel Molland at Monomeith, taken in the year prior to her retirement having taken over the school in 1914 and then set it on a path for the future as an incorporated company in the hands of a school council, with Mr Keith White as president, in 1956. Black and white reproduction photograph of a a residence (Monomeith) with steps in the middle ground, leading up to a verandah with ornate ironwork. Mabel Molland stands on the steps and a young student can be seen on the verandah.

This catalogue was produced by the South Australian wool auctioning company Elders, Smith & Co. Ltd. It accompanied their celebration of a century of wool sales in 1978. The first wool auction in South Australia took place at Elders a century earlier, on the 15th of October 1878. It was covered in detail by The South Australian Register. At the sale, 1976 bales of wool were offered in what was the beginning of the wool storage and brokerage system in South Australia. Elders, Smith & Co. was established in 1839 by Alexander Lang Elder. Born in 1815 in Scotland, he moved to Australia at age 24 and set up Elders in Port Adelaide. Interestingly, the company’s original site is now the South Australian Maritime Museum. Elders’ business partner was Robert Barr Smith. Also born in Scotland, he moved to Australia in 1854 at the age of 30. Smith was an important part of the Company’s first wool sale. Smith made statements at the auction for South Australia to have a proper wool industry; with a purpose-built wool store, auction house and for the state to be able to supply its own products. This was met with a “Hear, hear” from the crowd at the auction. This statement is reflected upon within the catalogue. The catalogue itself also contains images of the company’s first wool auction, an outside image of Elder’s Wool Warehouse in Port Adelaide as well as an image of the Show Floor inside of this Port Adelaide warehouse. The catalogue also contains a quote from Elders’ Wool Manager for Victoria and Riverina, Murray Jewster. He discusses how the company is proud of its history and looking forward to its future in assisting both wool buyers and sellers. The quote also highlights Elders shift from being an Adelaide focused business, growing to span the width of Australia. 4 page booklet. Yellow paper with black and red print.south australian wool auctioning, elders smith & co. ltd., south australian wool producing, alexander lang elder, robert barr smith

Ebenezer Presbyterian Church is located in Armstrong Street South, Ballarat. The earliest church on the site was wooden church was and built in 1857 for the miners Gold Rush. In 1862 the wooden building was replaced by the bluestone church still in use today. The bluestone church was designed by architect Henry Richards Caselli in Lombardic Romanesque style. It features tall windows with paired round headed lights, buttresses and huge brackets. The porch and gallery were added in the 1880s to cater for an increase in the size of the congregation and are the only additions to the church. The 1880s porch features bracketted gables, finial, piers, string course and triple windows. The Ebenezer Church is important architecturally for its interior as well as its exterior, as it has a Classical Revival design that is both distinctive and unusual in Australia. The Ebenezer Presbyterian Church Hall built to the right of the church was constructed in 1892 and is made of locally produced red brick, which was more fashionable at the time. It too has been built in Lombardic Romanesque style in sympathy with the church building and features tall arched windows. The double-storey presbytery, built on the left of the church dates around the 1880s and is also constructed of red brick. Built in Victorian Classical Freestyle, it has elegant quoining on its corners, large windows upstairs, and prominent bay windows on the ground floor. The Armstrong Street facade is sheltered from the sun by a verandah and balcony featuring fine cast iron columns and lacework. The whole complex is surrounded by its 1880s cast iron paling fence. Henry Richards Caselli is perhaps best known in Ballarat for the large number of churches in Victoria that he designed, with two Lombardic Romanesque examples in Ballarat, the Ebenezer Presbyterian church, Armstrong Street South between 1862 and 1863 and the Lutheran Church in Doveton Street in 1876. This photograph was taken during the Covid19 pandemic and the associated shutdowns.Colour photographs of Ebenezer St John's Presbyterian Church.ebenezer st john's presbyterian church, ebenezer, church, ballarat, henry richards caselli

10 minute sound and colour, which has faded to red. Begins with an unseen business man asking his secretary to ring his wife to tell her he will be late and is going to visit one of his other families. We see him driving his car, which is full of smoke from his pipe, whilst the narrator explains what Legacy does. The Legatee sheds his coat and trilby hat to play cricket with the fatherless son before having tea and cake with the widow whilst her story and that of her two children is told - details of the Legacy assistance are given. The film then moves to Legacy House where exercise classes are taking place and the smoking pipe makes a reappearance. Information about Legacy's work for the health and wellbeing of Junior Legatees is given, as well as details of the Mother's Club. The film shows the many Legacy committees at work before moving on to holidays organised for Junior Legatees at a beach side cottage - there is no indication of which city is featured at this stage but the beach could be Bondi. Widows are shown meeting at Legacy House, and then we see more elderly widows at Lady Gowrie House. Kyle Williams House for convalescent children is featured and is located near Sydney, which would indicate that the film is about Sydney Legacy. Archbold House, a hostel for girls, and Glen Mervyn House for boys are also featured, as is Cull House for boys undertaking apprenticeships. The film notes that there were 88,000 widows and children in Legacy's care, and the pipe smoking Legatee is seen driving the fatherless boy to tennis practice before the film concludes by saying that Legacy is contributing to the future of the nation. This film has been digitised to preserve its content. Melbourne Legacy gratefully acknowledges the support of the Victorian Government and Public Record Office Victoria for making this possible.A visual record of life in Sydney after the war and the huge number of children to have lost their father in WWII. The commitment of Legacy to giving them a better childhood and the amount of work done by Legatees is impressive.Khaki coloured film cannister with yellowing label.Handwritten 'John Gray Prods' and 'His other family - A Legacy' / '16mm Comp E/Color Print'sydney, residences, junior legatee

The Beebe name was well-known in Bendigo in the last quarter of the 19th and the early part of the 20th centuries. From 1875, William Beebe senior, monumental mason, occupied a site in the centre on the city, in Mitchell Street opposite King Street. Death was more part of life in those days, and the Beebes were there to provide the burial monuments. Later, he took his sons into the business, which grew as Beebe and Son. Many examples of their work can be found in the local cemeteries. William Beebe senior (1830-1891) was born in Rutland, the smallest English county in 1830, to stonemason Chamberlain Beebe and Susannah Clements. William emigrated to Victoria in 1854 and after engaging on unknown works in Port Fairy, Dunkeld, and Melbourne arrived in Bendigo. His obituary records that he commenced work here on the site of the Bank of Australasia (opposite the Shamrock Hotel), which would have been no later than 1856. He took up a 13 acre selection on the site of Rocky Vale Villa in 1864 and continued to select or purchase further parcels of adjoining land until he owned some 150 acres, much of it unfit for cultivation. He was a keen gardener and had a garden and orchard around the house. William took over 20 years to build the two-story sandstone and granite house "Rocky Vale Villa". The house was constructed from sandstone sourced "from an adjacent ridge of rocks" (Bendigo Advertiser 28/9/1891). Granite from Harcourt was used for lintels and quoins. Not long before he died, William was still adding to the house. In the Codicil to his will, he states that "I have just built and completed two additional rooms to my Dwelling house situe at Inglewood Road aforesaid" (dated 19/9/1891). William died one week later on the 26th September 1891.Photographs of a field trip to Rocky Vale Villa, 7 Wicks Road, Maiden Gully, Bendigo by the Bendigo Historical Society.history, bendigo, rocky vale villa maiden gully, william beebe stonemason bendigo

Glen Eira has a long history of association with various heraldic forms. From its early years the municipality of Caulfield had used the armorial bearings of the Caulfield Family (the Charlemonts of Castle Caulfield) to represent the roads board and later the town and city. In 1969 Caulfield City Council began planning to apply for an official coat of arms for the City. In 1974 Horace Hall, a Balwyn North resident and member of the Heraldry Society in London advised Council that the current usage was illegal, and that the Houston family, current owners of the Caulfield Arms could take legal action against Council for 'usurping their arms'. Mr Hall was commissioned to develop new heraldry for the City, and in conjunction with J. P. Brooke Little at the College of Arms, London, he prepared an acceptable design for Caulfield's Coat of Arms. The Council paid an additional sum to have a standard painted on the Letters Patent and the municipality's new coat of arms was drawn up in June 1975. The Coat of Arms retains a number of heraldic elements from the original Caulfield family insignia, including the dragons, the colours and the elements of the shield. The newly registered coat of arms and Letters Patent document for the granting of arms was presented at a civic service to mark the granting of armorial ensigns and the city banner to the City of Caulfield on the 1st May 1977. Significant elements of the coat of arms granted by these Letters Patent are as follows: The motto 'Labore Vinces' translates to 'By our labours we will conquer'. The helmet represents the rank of the owner. Public authorities are granted an esquire's helmet. The brickwork on the crest is a recognised emblem of local government. The Letters Patent also display a banner and a badge, both official symbols of the City of Caulfield. The badge, which is displayed on the banner as well as on its own, features a bridled horse. This represents the importance of racing, the Caulfield racecourse and the Caulfield cup to the municipality. These letters patent officially proclaim the granting of the coat of arms to the City of Caulfield. They are highly significant to the City of Glen Eira as they are the primary document that signifies the official and ceremonial heraldic powers of the Coat of Arms of the City of Caulfield. Mounted Letters Patent illuminated document for the Grant of Arms to the City of Caulfield presented on 1st May, 1977. Hand written and hand painted on cream coloured parchment using different coloured inks, mainly black, blue, red and gouache and gold paint. The bottom edge is folded up over itself approx. 45mm revealing the flesh side of the parchment, which displays black ink signatures and three sets of two horizontal slits that hold three blue ribbon. The ribbons support three wax seals in round, gold coloured metal cases held by the wax through slots in the casing. Although covered by the cap top, each wax seal within displays a different flag emblem with a crown on top, surrounded by a ring of text (difficult to read), noted when the cases were opened during conservation treatment. See attached transcription.arms, symbol, heraldry, glen eira, council, caulfield

Arthur was a well-known Surrey Hills identity until early 1990s. He was a welder and ran his business from his home at 55 Sunbury Crescent. His father had been a hansom cab owner/driver changing to taxis when cars took over. Arthur known to most locals as "Tiger" was a mine of information on local history and supplied many photographs of Surrey Hills. REF: Oral testimony - Rudi Mineur, 22/7/2019: Arthur was born at 55 Sunbury Crescent and was an only child; he lived all his life there, and did not marry. This photo was taken at the home in Sunbury Crescent of Rudi and Betsie Mineur. Rudi worked as a taxidermist and often had large fish to mount as trophies. This photo was taken at Arthur's request as a ruse. He did not catch the fish. Arthur was the only son of Frederick Adolphus Lyons (1891-1980) who was born in Surrey Hills, son of Thomas and Catherine Lyons. He married Elizabeth Ruby Hall in 1918. They lived at 55 Sunbury Crescent. The Lyons’ home was called ‘Knopshambury’ - this was probably a misspelling of Knockshanbally in Co Kilkenny, the birth place of Fred’s father, Thomas Edmund Josias Lyons (1846-1915). Arthur Lyons was born in Surrey Hills on 12 Jun 1920. He became a motor mechanic / welder and lived at 55 Sunbury Crescent. This is one of a series of photos donated by Arthur Lyons. The donation was made while he was in hospital. He died shortly afterwards (23 Sep 1990). Donation was finalised by a neighbour, Mrs Florence Ann Armitstead, wife of Glen Victor Armitstead. Glen was a local hairdresser. They moved to 11 Sunbury Crescent after their marriage in 1939. Arthur had no relatives to distribute the material to. A coloured photograph of a man, dressed in a jumper, trousers, gumboots and a hat, posing with a fish and a fishing rod.Arthur Lyonssunbury crescent, surrey hills, taxis, motor vehicles, welder, fishing, arthur lyons, arthur frederick lyons

The University's mace was carried in procession for the first time during the Graduation ceremonies in May 1996. The mace was presented to the University by former Chief Commissioner of the Ballarat City Council, Vern Robson, at a ceremony on 02 February, following a national competition for its design, sponsored by the Council. (The Flag, Issue 2, July 1996) Nineteen artists responded to the competition which called for a design that would embody a distinctive Australian image reflecting the heritage of the city and in relationship with gold, an Aboriginal element and the history of the University. The winning entry, dominated by a poppet head, was submitted by Central Victorian artist/sculptor Trefor Prest, a sessional lecturer in sculpture at the University.(The Flag, Issue 2, July 1996) The Herald Sun of 03 February 1996 reported 'the new mace shows importance elements of Ballarat's heritage as well as the university's focus on the future. The artist emphasises the egalitarian nature of Australia as embodied in Ballarat's famous slice of history - the Eureka uprising. ... The mace has a poppet head at the top of the shaft - an unusual element for a mace - but it represents Ballarat's mining history and the University's evolution from the Ballarat School of Mines. An opening egg at the top stands for the nurturing of development and learning. The mace's straight shaft is depicted as the tree of knowledge and, incorporating a bark canoe scar, Ballarat's Aboriginal heritage. At the end of the shaft is a surveying device, which represents precision and accuracy ads embodied in the university's academic pursuits.' Bob Morrell of the University organised the national competition to design the mace and said 'It is in keeping with the university's logo, 'proudly flying the flag', which incorporates the Southern Cross.' This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007. Trefor Prest lectured in Sculpture at the University of Ballarat from 1995-1996.The mace symbolises the office of the Chancellor. The design of the mace is the outcome of a national competition and represents the cultural diversity of Australia. The poppet head on the top of the mace refers to gold mining, which underpinned the development of Ballarat. The protruding spikes recall the Eureka Stockade. The 'egg' shape enfolds and nurtures the development of knowledge and learning. The shaft with the three 'branches' represents the Tree of Knowledge, and includes a bark canoe scar which recognises the integration of black and white Australian traditions. The lower part of the shaft culminates in a device suggestive of scientific or surveying and measuring technology. This represents precision and accuracy embodied in the academic pursuits of Federation University Australia.art, artwork, trefor prest, prest, mace, federation university, university, eureka stockade, aborigines, scarred tree, mining, university mace, ballarat