This item was from the original Torquay primary School. It is believed to date back to the early 1900s or earlier. It was supplied to the school by the Public Works Department and still bears the PWB brands. The desk was purchased by the late George McCartney, at a public auction of the old school's furniture and effects and donated by the McCartney family to the Torquay and District Historical Society in 2017. Some repairs and restoration work were completed by the Torquay Men's Shed.Wooden school principal's desk PWD on outside of front right hand leg.torquay primary school, public works department, mccartney family, torquay men's shed.

Part of the Zakrzewski Collection of spinning wheels donated to the National Wool Museum by Mr Wlodzimierz Zakrzewski. For many years, Mr Zakrzewski collected, researched and repaired spinning wheels from all over the world. This wheel is from the Black Forest region of Germany and dates from the late 19th century. It would have been used mostly for spinning flax. It was purchased from MacDonald Antiques at the Hawthorn Market.Part of the Zakrzewski Spinning Wheel collection.handicrafts - history flax, spinning wheels, highlights of the national wool museum: the zakrzewski spinning wheel collection - exhibition (28/07/2001 - 02/12/2001), zakrzewski, mr wlodzimierz, handicrafts - history, flax

Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house.The white painted verandah has a brass plate beside the door with the name Susan Fitzmaurice. In front of the door is a door mat and the veranda has a white hanging seat and a timber flower box with flowers."Susan Fitzmaurice" name on front of building. Date on plaque on top of front wall. Contents: - flower box with flowers, wooden swing, door mat.

Pittock collection: three tenon saws, used in a mitre box to trim timber * Saws vary 305(2)-360 mm blades, three different teeth pitch * Two saws manufactured in cast steel by Henry Disston & Sons, Philadelphia U. S. A., the longer saw has a temporary repair of the handle with wire restraining the cracked timber handle * Third saw has Albert E Pittock inscribed in the steel blade, Pittock is also etched into the timber handle. The saw was manufactured in cast steel by Bray & ?rason, Sheffield. Items stored in Pittock coach builder's box, reference 13000.1.

Demonstrates nature and size of gang undertaking road repairs during 1966 in Bridge St and the buildings on the south side of the street.Black and White copy photograph of a newspaper photograph taken by The Courier, taken 20/9/1966, published 21/9/1966 of track repairs in Bridge St. Shows the nature of the work, and the level of the traffic in the streets at the time. Eight men working in the view. In the background are the buildings on the south side of Bridge St, including Magnin, a Disposal Variety store, Faull's Foot rest, and Dickins. In the far distance are two trams parked in the loop. Collected by Alan Bradley from the Ballarat Courier early 1980's. See Excel file "Record of Ballarat Courier Photos SEC era" (Archive Documents) for source of details.On rear stamped "Copyright, The Ballarat Courier Proprietary Limited." and "85%" in ink.tramways, trams, bridge st, road works

The lightweight metal (? tin) suggests this was an everyday item for the working class. It dates to c. 1878 although these were still being sold in 1915 when it was noted that the pot should be rinsed immediately after use with salt water to prevent a tin taste.Old metal French coffee, pot a tapering cylinder fourteen centimeters on the bottom and nine centimeters at the top. It is twenty-eight centimeters high. There is a cap on top with a knob to remove it, there was a hinge attached to the pot which is broken. the wooden handle is 100 centimeters long and 25 centimeters diameter it's attached to a 50 centimeter metal protrusion from the pot. The spout is a tapered tube 140 centimeters long, 30 centimeters diameter at the pot and 15 at its end. there has been some re-soldiering repair where the spout is attached to the pot. Thew spout is at right angle to the handle. the pot has a rusted appearance,coffee pot, miner's item

This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.DEPARTMENT OF PUBLIC WORKS, N.S.W. RIVER MURRAY WATERS SCHEME. HUME RESERVOIR. 21. Excavations for foundations inside coffer dam. New South Wales. January 1927. Cofferdams are temporary structures used where construction is being carried out in areas submerged in water. They are most commonly used to facilitate the construction or repair of dams, piers and bridges. To divert the river, a Coffer Dam was built across the old bed above and below the Dam site and tying into the end of the concrete wall built inside the levee bank. This completely surrounded the remainder of the site of the Dam and south wing wall, including an area of 12½ acres. hume reservoir australia, river murray waters scheme, hume reservoir construction, coffer dam

Digital image - four pages - of a report to the Melbourne Tramways Trust, preliminary report looking at the condition of the tramway track - rails, wood blocks prior to the take over of the Tramway by the Trust (1916). Prepared by T Hamilton Engineer and Secretary, dated 10/3/1913 assisted by Gerard Wight of Melbourne Uni. Looks at each line, rail wear, opening dates, rail weight, and condition of blocks. Also looks at the covenants or conditions of lease for the track and tramway, Completes report with notes about repairs, maintenance and renewals and legal advice of Sir John Madden. See item 9151 for an original copy.trams, tramways, melbourne, cable trams, track, trackwork, reports

Book - green Rexene covers, with title - "Melbourne and Metropolitan Tramways Board - Works Codes and Instructions". Six sections, sewn into covers, dated April 1961, signed by J. J. Fisher, Civil Engineer. 118 pages plus covers. Book numbered "46". Provides an list of contents, giving provisional codes or instructions for works, instructions, about the maintenance and repair of the track welding, safe working, watchmen, care of lamps, and plant. 2nd copy added 5/5/2019 from donation of Barry Brooks ex Bob Prentice Collection. Images revised - jpgs removed and pdf added.Inside front cover has a signature and date of 9/8/61 in ink and inside rear cover "not entered" in pencil. Could be a reference to a Court document - see Reg item 94.trams, tramways, mmtb, track, maintenance

This box which once contained linen thread manufactured in Scotland and labelled "British" manufacture" was used for the repair/manufacture of clothing by professional seamstresses and those wives required to "do" repair stitching of family clothes. This box was manufactured in a period when the title "United Kingdom" was used (late 1700's early 1900's) to describe the union of Britain and Scotland. The label however can be misleading as the"British Manufacture" thread was manufactured in Scotland. The broad term "British Manufacture" was used for the benefit of those in the "colonies" of Australia and New Zealand, during a period when the "coined" phrase "best of British, or British best" was synonymous to "top quality". After World War II the need for "cheaper products" was more persuasive than the quality of the product. In rural areas this shift to cheaper "non British" goods was at a slower rate than in the cities. Goods such as clothing manufactured or altered by seamstresses were regarded as of a higher standard and therefor the use of linen thread from "Britain" was a sign of quality and reliability.This box which contained linen thread, "British" made, is very significant to the Kiewa Valley because it demonstrates the conditions under which households in the late 1800's and early 1900's evolved from a "domestic repair /replacement" of damaged clothing to a consumer of recycled and shop bought clothing and linen. The ability of semi isolated rural based families to purchase "off the rack" clothing was severely affected by weather, long distance over dirt roads(poorly serviced) to large towns(shops), horse/cart or slower driven cars. The purchasing of clothing was, on the whole, from trading house "mail order" consignment orders.This red paper covered box has a white covered lid (top) with black print detailing the manufacturer and contents. This box contained 150 yds of linen thread 2 cord. A small added note pasted on one side "USUAL TWIST (s)" describing the thread's appearance. Two semicircular "finger" holes on two sides of the lid permit easier removal of the lid from the base.On the top lid: "W.&J. KNOX'S" below this a crest with latin motive "MOVEO ET PROFICIOR" English translation "I proceed and am more prosperous" encircling an open winged falcon. below this "LINEN THREAD", "2 CORD." "WARRANTED" "150 Yds." Made from Flax." British Manufacture". On one side "DRABS SOFT FINISH" within a shield "KNOX'S TWO CORD 150 YARDS 30" next to this a trade mark "W & J KNOX below this "made in KILBIRNIE, SCOTLAND"thread, cord. flax, box container, linen thread, seamstress items, cardboard box

Yields information about the views of various letter writers, special trains for the Begonia Festival and issues re costs.Foolscap sheet of plain paper, with rounded corners, with 7 newspaper cuttings, concerning the mooted closure of the Ballarat Tram system 2 and 3 March 1962. All from The Courier, unless noted otherwise. One cutting missing. 1 - "Tram Repairs" - 2/3/62 - Letter from R Courtney local Secretary of the Union, regarding the cost of new trams, tracks needed to and Geelong fares raised shortly before closure and then again afterward. 2 - Letter - 2/3/62 - signed by a tram driver regarding repairs of tram faults 3 - "Bolte re Promise on trams" - 2/3/62 - representations to Bolte by the Opposition leader Stoneham and protested to the Minister Mr. Reid 4 - "Special Train for Festival visitors" - The Mail, - 2/3/62 - re visit to Ballarat by the PMG Social club on 11/3 for the Begonia Festival 5 - "Sunday tour Festival City" - re a special train to Ballarat and being met by buses. 6 - "Trams Future" - 3/3/62 - 3 letters re costs of operations - two man trams, bus costs will be based on one man, trams are clean vehicles no emissions, Apex Club issues. 7 - "To Discuss Trams" - 3-3-62 - result of a Greater Ballarat Association meeting.closure, letter to the editor, editorial, sec, begonia festival, greater ballarat association

Underwear & 1 item of nightwear belonging to Mary Monica Fleck Turner (Smith). Turner Collection.Items of clothing belonging to an early Kilmore family making up part of the Turner Collection.Eight camisoles, one underskirt, one bottom half negligee, one nightgown case. Generally in very good condition. TEX-0055.1 Underskirt, cotton & lace with blue satin ribbon. TEX-0055.3 Embroidered nightgown case TEX-0055.4 Camisole, lace & cotton, circular design on front, cap sleeves, prev. repair L front, cap sleeves with rust stains L sleeve. TEX-0055.5 Camisole, lawn & lace, white ribbon threaded through neckline, small holes throughout. TEX-0055.6 Camisole, white broderie anglaise, narrow fabric shoulder straps, drawstring neckline. Small holes throughout. TEX-0055.7 Camisole, cotton & lace, twisted gold ribbon at neckline, small holesthroughout. TEX-0055.8 Camisole, broderie anglaise, wide lace shoulder straps, blue ribbon at neckline, drawstring waist. 2 buttons missing, tear to lace mid upper back. TEX-0055.9 Camisole, white cotton, embroidered, pink ribbon through neckline, pintucks & drawstring at waist, 3 buttons missing. TEX-0055.10 Camisole, muslin, softlace shoulder straps, blue ribbon at neckline, hook & eye at waist, buttons missing. TEX-0055.11 Camisole, cotton & lace, pink ribbon at neckline, some holes/tears, 2 missing buttons, previous repair under R arm.TEX-0055.11 - Label outside R bodice edge 'Melbourne/Robertson & Moffatt Pty Ltd/Bourke Street'.underwear, nightwear, turner collection, smith

Date estimated to be circa 1912 based on the style of printing on the reverse of the card - Kodak Austral paper for real photo postcards, the paper was manufactured c.1908-1914 (See also POSTCARDS ON KODAK PAPER - IS IT POSSIBLE TO "DATE" THEM? http://tps.org.au/bb/viewtopic.php?t=115) Brougham Street was created in Josiah Holloway's 1851 subdivision of Little Eltham. It was one of several east-west streets shown on the subdivision plan as crossing the Diamond Creek. The western part was named Wellington Street on the subdivision plan but was later changed to conform with the name of the eastern part as acknowledgement of the continuity of the street. It is not known when the first bridge was constructed in Brougham Street however it was certainly mentioned at Council’s meeting of 2 June 1884 as being in a dangerous state of repair. This photo (c.1895) of an old bridge shows a very low-level simple log girder bridge crossing the creek at a right angle and so the approaches involved bends in the road alignment. This bridge was generally known as Kaylocks Bridge or Kaylock’s Crossing after the owner of the adjoining land. It was most likely built from around the mid-1850s, or a crossing of some fashion established as Richard George Kaylock, butcher of Little Eltham and his wife Emily Ann settled there in 1854. His property was in Wellington Street (now Brougham Street) and apparently extended across the Diamond Creek. The land on the western side of the creek was farmed, the house being on the eastern side. Kaylock's Bridge formed part of the original coach road to Eltham and in 1922 was described as an "old rustic bridge". Its low level and insubstantial construction made it susceptible to flood damage, necessitating frequent closures until repairs could be carried out. In September 1922, Council called for tenders for a new timber bridge to be constructed at Kaylock’s crossing. An engineering assessment carried out for the Council by Macleod Consulting at the time of the replacement suggested that the construction details indicate that it was in the 1900s, however this dating could possibly have been the result of numerous repairs undertaken over the years to flood damage. The tender was awarded to Mr Weller of Kangaroo Ground who commenced work in February 1923 on a higher-level timber trestle bridge. Work was slowed due to illness of the contractor and the accidental death of a man in March 1923 following the collapse of the bank after he had jumped into a hole that had just been blasted. The bridge was completed around July 1923 at which point the old structure was pulled up, marking what was described in the ‘Advertiser’ newspaper as the passing of an old and well-loved landmark in the district. In April 1924 the approach to Kaylocks bridge was washed away during the heavy flooding that destroyed the Main Road bridge. The western side was repaired, and an extra span was added to the eastern side using timber from the destroyed Main Road bridge. The bridge was again severely damaged four months later in August 1924 When a lack of finances delayed repairs to the Bridge Street bridge in 1931 (also referred to as Obelisk Bridge at the time), traffic had to detour via Brougham Street for some time. Local residents feared that the Bridge Street bridge might never reopen. Kaylocks Bridge was constantly subject to damage by floods. In the 1934 flood it was submerged by two feet of water. In more recent times the bridge was again severely damaged by flooding and repairs made. A new bridge and adjoining footbridge were constructed in 2009.Digital file only Postcards scanned from the collection of Michael Aitken on loan to EDHS, 2 Sep. 2022michael aitken collection, eltham, postcards, bridge, brougham street, diamond creek (creek), kaylocks bridge, wellington street

Brougham Street was created in Josiah Holloway's 1851 subdivision of Little Eltham. It was one of several east-west streets shown on the subdivision plan as crossing the Diamond Creek. The western part was named Wellington Street on the subdivision plan but was later changed to conform with the name of the eastern part as acknowledgement of the continuity of the street. It is not known when the first bridge was constructed in Brougham Street however it was certainly mentioned at Council’s meeting of 2 June 1884 as being in a dangerous state of repair. This photo (c.1895) of an old bridge shows a very low-level simple log girder bridge crossing the creek at a right angle and so the approaches involved bends in the road alignment. This bridge was generally known as Kaylocks Bridge or Kaylock’s Crossing after the owner of the adjoining land. It was most likely built from around the mid-1850s, or a crossing of some fashion established as Richard George Kaylock, butcher of Little Eltham and his wife Emily Ann settled there in 1854. His property was in Wellington Street (now Brougham Street) and apparently extended across the Diamond Creek. The land on the western side of the creek was farmed, the house being on the eastern side. Kaylock's Bridge formed part of the original coach road to Eltham and in 1922 was described as an "old rustic bridge". Its low level and insubstantial construction made it susceptible to flood damage, necessitating frequent closures until repairs could be carried out. In September 1922, Council called for tenders for a new timber bridge to be constructed at Kaylock’s crossing. An engineering assessment carried out for the Council by Macleod Consulting at the time of the replacement suggested that the construction details indicate that it was in the 1900s, however this dating could possibly have been the result of numerous repairs undertaken over the years to flood damage. The tender was awarded to Mr Weller of Kangaroo Ground who commenced work in February 1923 on a higher-level timber trestle bridge. Work was slowed due to illness of the contractor and the accidental death of a man in March 1923 following the collapse of the bank after he had jumped into a hole that had just been blasted. The bridge was completed around July 1923 at which point the old structure was pulled up, marking what was described in the ‘Advertiser’ newspaper as the passing of an old and well-loved landmark in the district. In April 1924 the approach to Kaylocks bridge was washed away during the heavy flooding that destroyed the Main Road bridge. The western side was repaired, and an extra span was added to the eastern side using timber from the destroyed Main Road bridge. The bridge was again severely damaged four months later in August 1924 When a lack of finances delayed repairs to the Bridge Street bridge in 1931 (also referred to as Obelisk Bridge at the time), traffic had to detour via Brougham Street for some time. Local residents feared that the Bridge Street bridge might never reopen. Kaylocks Bridge was constantly subject to damage by floods. In the 1934 flood it was submerged by two feet of water. In more recent times the bridge was again severely damaged by flooding and repairs made. A new bridge and adjoining footbridge were constructed in 2009. Part of a slide show presentation "Bridges & Waterways of the Shire" by Russell Yeoman to the 13 September 1989 Society meeting. The presentation included slides of historic photos from the Shire of Eltham Pioneers collections as well as several recent views.Photo of earliest known crossing of the Diamond Creek at brougham StreetPostcard photo printbrougham street, eltham, wellington street, kaylocks bridge, bridge, diamond creek (creek)

This is a receipt or docket (number 7048) issued by Ross Motors in 1964 for goods supplied to John Wilson of Donovans Road, Warrnambool. Ross Motors were car dealers at 137-149 Fairy Street, Warrnambool in the 1940s, 50s, and 60s. They also repaired and serviced cars. In the 1940s they advertised as the ‘largest garage in the Western District’. The docket was for John Alexander Wilson for the purchase of three items from the garage totalling £2-12-0. This docket is of some interest as an example of one from Ross Motors in the 1960s. This is a buff-coloured docket with black lines printed for the firm of Ross Motors, Warrnambool. The printing is in black type and the handwritten information is in black and blue ink. ross motors, john alexander wilson, warrnambool

John Trestrail Freeman was an engineer who in 1889, with a partner named Olsen, established Freeman's Border Foundry in Murray Esplanade, Echuca. The Foundry later became known as Freeman Brothers when sons Harry and Tres took over the business. This business played an important part in shipbuilding in Echuca, fitting engines, building paddlewheels and carrying out repairs. It is thought this photograph is of Tres' mother or it could be his wife (Dolly Dean).The Freeman family is an important family in the history of Echuca boat building and engineering in the early 20th century. The business produced paddlewheels, fitted engines and conducted repairs on riverboats in the area. After the riverboats ceased the foundry went into engineering works producing agricultural implements and other general foundry works. It is thought that this photograph is of Tres junior's mother but the dates of the photograph would indicate it is more likely to be his wife, Dolly.Black and white photographic postcard of a woman dressed in a vibrant floral dress with string of pearls and another longer necklace. She has a brooch attached to her blouse. She has cropped straight hair and is wearing circular metal framed spectacles.On reverse: Printed "Post card/ Correspondence/ address only/Kodak Austral". Handwritten in pencil:" Member of Freeman family. Tres' mother?echuca boatbuilding, freeman family, freeman brothers foundry, echuca.

Long awaited building renovations in 2019 commenced with the replacement and upgrade of the 102 year old floorboards in the main hall and old Billiard room of the Mission to Seafarers Victoria. Some stumping replaced and repaired in places. Many older seafarers especially recall the regular dances hosted by chaperoned local young women and members of the Ladies Harbour lights Guild that commenced in the 1930s and carried on through to the 1960s. (see also significance statement)These photographs are another historical record. As a listed Building of Heritage significance the Mission to Seafarers commenced in consultation with heritage advice as per Burra Charter, the first phase of renovations to the century old building complex at 717 Flinders St which is still providing services and facilities to seafarers as per the original purpose and design. The club room or main hall was the sight of many performances, slide shows, film screenings, and events to entertain or raise funds for the Mission. Series of photographs depicting the new floor boards in the main hall, Flying Angel Club after renovation winter 2019 and before recarpetingbuilding renovations, flying angel club

These are reproductions of four Maruni60 chairs (item F032) The originals are Japanese kit form self-assemble furniture (1961) and were quite fragile and broke several times and needed repair. The originals were purchased from Anderson's furniture store in Chapel St Prahran, the store's back room was considered the coolest furniture showroom in Melbourne. Patricia Boyd had the cushions reupholstered to this purple fabric. These reproductions cannot be dismantled.Set of four timber frame with two purple upholstered cushions for back and seatwalsh st furnishings, robin boyd, maruni

Part of the Zakrzewski Collection of spinning wheels donated to the National Wool Museum by Mr Wlodzimierz Zakrzewski. For many years, Mr Zakrzewski collected, researched and repaired spinning wheels from all over the world. This wheel is a late 19th century spinning wheel from Japan and was used for spinning silk. It was purchased from Kazari Japanese Interiors in Prahran, after first being offered for sale at Stonnington Antiques Fair.Part of the Zakrzewski Spinning Wheel collection.handicrafts - history silk, spinning wheels, highlights of the national wool museum: the zakrzewski spinning wheel collection - exhibition (28/07/2001 - 02/12/2001), zakrzewski, mr wlodzimierz, handicrafts - history, silk

Part of the Zakrzewski Collection of spinning wheels donated to the National Wool Museum by Mr Wlodzimierz Zakrzewski. For many years, Mr Zakrzewski collected, researched and repaired spinning wheels from all over the world. This spinning wheel is from the Nepal / Tibet region. Interestingly, the hole in the crank which holds the stick to turn the wheel is extremely worn, demonstrating its lenthy use. It was purchased from Soo-Tze Orientique in Prahran.Part of the Zakrzewski Spinning Wheel collection.handicrafts - history, spinning wheels, highlights of the national wool museum: the zakrzewski spinning wheel collection - exhibition (28/07/2001 - 02/12/2001), zakrzewski, mr wlodzimierz

Part of the Zakrzewski Collection of spinning wheels donated to the National Wool Museum by Mr Wlodzimierz Zakrzewski. For many years, Mr Zakrzewski collected, researched and repaired spinning wheels from all over the world. This spinning wheel is from Germany / Bavaria and dates from the late 19th - early 20th century and has been restored. It was sold to Mr Zakrzewski by a member of the Handweavers and Spinners Guild who had hoped to restore it.Part of the Zakrzewski Spinning Wheel collection.handicrafts - history, spinning wheels, highlights of the national wool museum: the zakrzewski spinning wheel collection - exhibition (28/07/2001 - 02/12/2001), zakrzewski, mr wlodzimierz

M113 family of Armoured vehiclesentered service with Australian Army circa 1955.Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Research and historical display value, Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Green vinyl covered manual 54 pages, bound with metal screws being technical Manual User Handbook Carrier Fire Support, Full Tracked M113A1 ( FS }. Published by Australian Army 17 December 1970Ink stamp on title page " 8/13 VMR Regimental Collection "

This vehicle was issued to 8/13 VMR for transport services in 1970s and 1980s. Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Maroon stiff vinyl covered Technical Manual being User Handbook Truck Cargo 2.5 Ton GS 4 x 4 with winch. Published by Australian army 1967. Covers and pages secured with metal fastner.Ink stamp on title page " 8/13 VMR Regimental Collection "

The last train to Beech Forest ran on 30 June 1962, between Banool and Wimba. The train had a particularly motley look with 180 passengers loaded into NU goods vans and the old NQ wagons hastily fitted out with temporary seats and tarpaulin roofing. The train was hauled by the G42 locomotive kept alive through patch-up repairs and cannibalised G41 parts, steam escaping from every joint.Last train to Beech Forest, 30 June 1962.beech forest; trains; railways;

Relates to Chevrolet Armoured made in USA during WW11.Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or Tech Support Troop (TST) and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Research vehicleBuff coloured soft cover manual being Technical Manual Ordnance Maintenance Transmission, Transfer Case, and Steering Systems for Medium Armoured Car T17E1. Published by War Department ( USA ) 7 October 1943.Heavy ink stamp on cover " Archive Copy Location " then follows in pen " 3/A/1". In red ink top right corner " T10 { or} T16"

The paddle steamer "Gem was first launched in 1876 as a passenger and cargo mode of transport on the Murray River. In the '30's and '40's it operated as a tourist passenger boat. In 1948 it sunk in 15 feet of water but was repaired and refloated. It was retired in 1950. In 1962 it was sold to the Swan Hill pioneer Settlement. The Swan Hill Folk Museum was Australia's first open air museum and opened to the public in 1966, It was renamed the Pioneer Settlement.Bendigo Advertiser ''The way we were'' from 2003. Memories: the paddle steamer Gem arrives at Swan Hill in 1963. the pioneer Settlement Museum is seeking contact with people who have worked at the museum in the past 40 years. The clip is in a folder.newspaper, bendigo advertiser, the way we were

As quoted from Wikipedia, ‘An anvil is a block with a hard surface on which another object is, struck. The block is as massive as it is practical, because the higher the inertia of the anvil, the more efficiently it causes the energy of the striking tool to be transferred to the work piece’. The lightstation’s anvil is a red-painted iron block with a conical beak or horn at one end that was used for hammering curved pieces of metal. It would have stood on a heavy free-standing pedestal, such as a large tree stump, to allow complete access to the item being hammered. Some anvils display the manufacturer’s name in the metal on the side, but this is not the case here, and its age, although unknown appears to be quite old, perhaps c.1900. It appears to have had a lot of use, and although no record of this survives, it is presumed that a forge operated on site for hammering, cutting, shaping and repairing tools such as bolts, nails, hooks, chain segments, pulley blocks, hinges, crow bars, picks, chisels, horseshoes and harness hardware. A hames hook (which forms part of the collar worn by a draught horse) survives at the lightstation as do many other heavy metal tools and pieces of equipment. The anvil is an example of the necessary resourcefulness and self sufficiency practiced by lightkeepers working and living in a remotely located workplace and home, and many of the iron items in the collection may have been repaired or even made on its working surface. As a lightstation manager Chris Richter used the anvil to manufacture pulley blocks for sash windows, repair brass door hinges & sharpen cold chisels, crowbars and picks and other lightkeepers have used this anvil for many fabricating jobs such as manufacturing ducting for the generator room ventilation system."The lightship only came in every three months with supplies and there would have been repairs to do between visits from a blacksmith - who would have had to travel on the ship. Also, the ship was only anchored in the bay long enough to unload supplies and collect and deliver lightkeeping staff – probably not enough time to get much smithy work done – especially if the weather packed it in and the ship had to depart. Lightkeepers in our time had to be self sufficient, resourceful and innovative and I imagine that would have been the case in the past." It has second level contributory significance.Red painted blacksmith's anvil.

This label comes from the business of Howard Sleath. He was a 20th century violin and viola maker and repairer from Queensland. The label is probably part of the memorabilia of Edith Jacobs (nee Larwill) who was a 20th century Queensland violinist with the Queensland Symphony Orchestra before her marriage and change of residence to Warrnambool. The Warrnambool and District Historical Society has some of Edith Jacobs’ violin strings and the label may have come with them. This label is retained for display purposes and possibly as a memento of a local Warrnambool musician, Edith Jacobs. This is a small piece of paper with a black border and black printing on a white background. One edge of the label is tornSleath’s Violin, Violoncello and Bow Makers 454 George Streethoward sleath,, violin maker, edith jacobs,, history of warrnambool