Used on tram 27 to celebrate is "1,000,000" miles, but later work determined that there had a been an error in addition of the miles operated statistics - see reference for the background story. Two copies held. See item 9651 for a 3rd copy.Demonstrates a banner to mark a tram that had been calculated to achieve 1,000,000 miles of running in Ballarat.Bammer - Painted on treated white linen, banner used to celebrate Tram No. 27, reaching 1,000,000 miles. Has wording in large red capital letters "This tram has just completed 1,000,000 miles in Ballarat". Fitted with metal eyelets in each corner and centre of top and bottom edges. See Reg. Item 3316 for photo taken by The Courier on 29/6/1968. Has been rolled around a tube with tissue paper for storage. Not known who made it - SEC or TMSV. 3315.1 - As above, held by the BTPS since 1971.On rear in blue ink "Dash Banner, Car No. 27, 29th/6/68". Has pencil layout marks visible.tramways, trams, million miles, banner, signs

Timetable - listing the various runs, times at various timing point or locations for Doncaster Rd (Depot) - via Middleborough Rd - Box Hill - East Kew bus route, weekdays Index sheet 81 and Footscray depot - Saturday printed on yellow paper, Deer Park - Sunshine Park - Sunshine - Footscray - City index sheet 35, four pages. Each sheet has been taped on the rear for storage and hole punched. On the rear of each sheet (all the same) details of the route, time points. Front and back sheets scanned.trams, tramways, mmtb, timetables, doncaster depot, footscray, box hill

Purchased from Regimental funds in 1910 and presented by HE the Governor of WA Sir Gerald Strickland, KCMG, at a parade held on the Esplanade, Perth, 18 February 1911. Consecrated by the Right Reverend COL. Riley, DD, VD, Senior Chaplain of the Australian Commonwealth Military Forces. This colour was subsequently inherited by successor units to the 11th Australian Infantry Regiment (Perth Regiment), including 88th (Perth) Infantry, 11th Battalion (The Perth Regiment) and 11th/16th Battalion. The colour was handed over to the Perth City Council at a special parade of the 11th/16th Battalion held in Forrest Place on 2 June 1930, and was laid up in the Council Chambers in Murray Street. Together with the other historic colours handed over at the time, this colour later went into storage when Council moved premises in the early 1960's. Perth City Council had some restoration work carried out on these colours in 1975 and later had them on display in their display room at Council House, St Georges Terrace. They were subsequently placed in storage again. Following negotiations by the Army Museum of WA Perth City Council passed on these colours to the Museum in November 1993 Red George Cross on a white background with red and white fringe. In the centre the regimental badge in gold within a wreath of Western Australian kangaroo paw and banksia, surmounted by the Crown. Below the wreath is the Battle Honour "SOUTH AFRICA 1900-02". In the upper canton is the roman numeral "I" (Note:- The official Battle Honour for South Africa granted to 11th Australian Infantry Regiment under Military Order 123/1908 and subsequently published in the Australian Army List, was "South Africa 1899-1902") regimental colour, military heraldry, battle honour

Series consists of over 140 volumes of Council Records. These records (apart from the Rates Books) fall outside the provisions of the Victoria Public Record Office Disposal Schedule - ie. Retention is at the discretion of Council. A complete listing of the volumes is attached, however the collection includes Minute Books, Letter Books, Country Roads Board Ledgers, Finance Committee Finance Books, Water Supply Rate Books, and numerous cash books and ledgers. Consideration is currently being given to sending approximately half the collection to off-site storage (Ausdoc - Port Melbourne)shire of eltham archives, series listing

Ticket was used in 1931 and kept in storage by a member of the Edina's crew. The SS Edina was the most famous steamer in Australia and underwent a number of changes and refits during its lifetime. It had an unchallenged record of strandings and collisions with other vessels and of escaping serious damage itself. The vessels City of Melbourne, Courier, Manawatu, Excelsior (twice), Hovell, Batman, all suffered. When Edina was retired in 1938 it was the world's oldest working steamer and had travelled more than 1 million km. She was finally broken up by George Seelf on the banks of the Maribyrnong in 1957.The SS Edina was an iconic and affectionately regarded part of Port Phillips maritime history and culture. It is historically significant for being internationally famous as the worlds oldest working screw steamship between 1912 and 1938. Its career was varied and interesting and it is considered significant for its involvement in the Crimean War, US Civil War, NZ gold rushes, and locally for its career as a western district steamship and Bay steamer. The site is archaeologically significant as the only remnant of the hull of the vessel and as part of the Maribyrnong riverine landscape situated amongst the remnants of shipbuilding slipways, Footscray wharves, S781 UnidentifiedClipped and used steamship tickets [the children's tickets are an adult ticket cut in half diagonally] - Melbourne to PortarlingtonAustralian Steamships Pty Ltd, Howard Smith Ltd, managing agentsticket, steam screw vessels, ss edina, port phillip, bay steamers

Articles include Life Governorship bestowed upon Alice McClelland for her 41 years of service, David Palmer Music Library given to library with terms of agreement signed by Hugh Jeffries and Neil Westh (David Palmer Trust) and Captain Semmens and Dr Orr (BLV), sound system installed in and outside storage shed added to Hall, still operating at a deficit and with no reply from Free Library Service Board of Victoria on assistance, and decision to close of Ballarat branch of Braille Library and make it an Auxiliary for the Aged Blind with next year to be the final one.32 pages of text with drawingsbraille library of victoria, corporation records

This portfolio was created in response to a gift of apples from the Maldon district community in Central Victoria Australia to the children of Maldon Essex in the post World War II period. It was created for presentation to the Maldon Primary School by their UK counterpart, in gratitude, and as a symbol of cultural and political bonds. For some years before we received it the portfolio was kept in inappropriate storage and suffered some damage, and parts of it seem to have been removed. Nevertheless it is a fascinating and heartwarming document, which casts a light on the United Kingdom of the late 1940s. It is commonly known as "The Apple Book".The portfolio comprises 52 pages with various items affixed. These may be typed pages, photographs of places and people (including many small portraits), and artworks on paper and fabric. A cover is formed by heavy cardboard, covered with paper, with a hinge made near the left side and a heavy cord used to hold it all together.There are no inscriptions or labels, but the heraldic crest of Maldon Essex is reproduced on the front cover.maldon essex, maldon victoria, world war ii, apple

A portrait of His Royal Highness Prince Philip, Duke of Edinburgh that has been owned by Legacy for many years. It was previously hung alongside a painting of Her Majesty Queen Elizabeth II, but has been moved to storage in the archive. Extremely similar to a portrait of Price Philip that is owned by the City of Melbourne. It had been painted in 1956 just before Price Philip opened the Olympic games in Melbourne. Perhaps this was a draft or copy of the City of Melbourne portrait. Prince Philip was an honorary member of Legacy after a visit to Sydney Legacy in 1954.Oil painting of Prince Philip in a gilded wooden frame.Author signature in bottom right, 'Dargie'.portrait, prince philip

Set of 3 MTOCo cable tram equipment specifications: 1 - Contract No. 8 - sheave pulleys, crown pulleys, curve pulleys, depression frames, manhole covers, and manhole frames 2 - Contract No. 9 - for 13500 casks of cement - imported from Europe, including storage, tensile strength, and timing of deliveries. 3 - Contract No. 11 - similar to 1 - (11 has been typed over the 8) - details the items, referenced drawings, signed by Geo S Duncan as Engineer. Includes Schedule and Tender forms. Undated, though does have a dated of "188_".Yields information about the style of the specifications issued by the MTOCo during the 1880s for the supply of materials.Set of 3 documents printed on foolscap sheets.tramways, cable trams, specification, track work, tenders, tender documents

The cabinet appears to be homemade and purposely built for the storage of a collection of vinyl records. The records are stored vertically in a 'holder' with a rectangular wooden base with soft covered wire strips well spaced and each extended to fit up to 50 records. See KVHS 18 . The stands then fit into the cabinet with the base of the holder resting on wooden ledges glued on each side allowing the records to fit in all directions. There are two levels - one on the bottom and one halfway up. Holding approximately 100 records altogether. The cabinet's door is opened with a silver push button latch. Many men made their own furniture as they had the equipment and experience to do so. During the 1950s vinyl records were played to entertain families and to educate children in the areas of music and dance. Mt Beauty didn't have TV until much later than the cities and furniture wasn't always available at the local shops.Wooden cabinet with 4 legs and a door with a silver push button latch. Inside are small ledges on each side at the bottom and halfway up.vinyl records, music, wooden cabinet

This amphora or jug, with a silhouette shaped like a woman with hands on hips wearing a long flared-out skirt. The design was used in ancient Greece for pottery storage jars, the neck being narrower than the body. The amphora was discovered by Joe O'Keeffe in 1934 in a sand blowout west of Levy's Point west of Warrnambool while he was planting marram grass for Mr Duncan. An article in the Warrnambool Standard newspaper of December 21, 1985, states that the amphora may be linked to the wooden sailing ship called the Mahogany Ship (also called the Ancient Wreck). Thermoluminescence testing indicates the relic was made in the mid-to-late 1800s and experts suggest it was of North African origin. The presence of the amphora in the sand dunes, and the amphora itself, are still a mystery. The amphora was donated to Flagstaff Hill on a long-term loan by the Duncan family and displayed to the public for the first time on December 21, 1985, until February 2023 when the display was returned to storage to rest with the redevelopment of the Assistant Lighthouse Keepers Cottage (Shipwreck Museum). An extensive search for members of the Duncan Family has been undertaken by Flagstaff Hill and stakeholders to resolve the loan term loan, but the family is not known. As such to properly care for the amphora, it has been registered until ownership can be determined.The object is significant for its possible link to one of Victoria’s and Australia’s maritime mysteries, the Mahogany Ship (also known as the Ancient Wreck). It is one of very few known relics that could give evidence of the existence and history of the vessel. It is listed on the Victorian Heritage Register S438 as it is one of Victoria’s oldest recorded shipwrecks. The identity of the vessel has the potential to change Australia’s history.Amphora or jug; earthenware, orange clay with areas of cream. The vessel has a wide mouth, a deep lip, two opposing handles between the neck and shoulder, and a bulbous body. The curved handles have a design of six bands between them. There are three rings of small dots encircling the body. The underside has concentric circles in the clay, uneven edge and pinhole markings. Pinhole patterns: [3 holes above 3 holes] opposite [3 holes above 3 holes], 1 hole] [ 1 hole above 2 holes]flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, amphora, jug, mahogany ship, ancient wreck, joe o'keefe, duncan, thermoluminescence, north africa, levy point, pottery, storage jar

The paper rack is an example of early 20th-century domestic furniture.Radk; paper or newspaper rack, rectangular wedge-shaped wooden frame, painted brown, with metal loops and wire for hanging against a wall. The front is a "picket fence design".flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, rack, paper rack, handmade, magazine rack, newspaper rack, domestic furnishing, storage, reading material storage

This particular lamp was made for the dinner table or "parlour". This was the most effective indoor lighting before electrical lighting was introduced in the 1940's. These table lights would have still been used after this time as emergency lighting during electrical power shortages (outages). These emergency lighting lamps, including candles, were eventually replaced by battery power. The Kiewa Valley was supplied by electricity well before many other rural regions due to the State Electricity Commission constructing the Kiewa Hydro Electricity power turbines (late 1930's to mid 1950's). Petrol and diesel generators were used in other rural regions before state wide electricity was available.The significance of this kerosene lamp to the Kiewa Valley is that it provides the proof that before the Hydro electricity scheme was established in the valley, householder and commerce relied on candle/kerosene power. Although at certain times before battery and solar energy became the night time lighters the sole source of lighting was candle power and kerosene power. The supply of both however was still required by most of the population by supply from city and larger country town suppliers. This nearly fully glass made table lamp(kerosene) has a large glass bowl/basin like kerosene storage unit with a glass circular finger handle (similar to a ordinary cup). Formed single star like patterns (50mm apart) encircle the centre of the bowl. On top of the bowl sits the metal (brass) wick holder with a small wheel protruding out one side for adjusting the wick length(increasing or decreasing the strength(regulating) of the amount of light projected. Four prongs rise from the circular base light fixture holding the windproof and refractive glass "pot belly" shield. lamp table, kerosene lamp, household lighting (non electrical)

This rocket launching machine is used in conjunction with the Dennett Rocket Set. Both are part of the rocket rescue equipment that launches the line-throwing rescue rockets. A light line is threaded through the carved holes in the 8 foot long shaft and attached to the scribed channel at the base of the shaft. The rocket head is fitted to the shaft and inserted into the machine. The machine is set at an angle determined by the person in charge of the rescue crew, and the legs and base of the machine are adjusted accordingly with the use of the quadrant, or protractor, and plumb-bob on the side of the machine. The rocket is then ignited and fired across the vessel in distress. John Dennett - John Dennett was from Carisbrooke, in the Ilse of Wight, UK. In 1826 he invented, patented and demonstrated an improved method of rocket powered, line firing rescue equipment for saving lives. The rockets had a longer range than the mortars being used, they were lighter, needed less preparation time, only needed one line for repeated shots, and fewer people were needed to move the equipment. Very favourable reports of Dennett’s rockets were received by those in charge of His Majesty’s Naval and Military services. In 1832, Dennett’s rocket-thrown line was sent out to the wreck of the ‘Bainbridge’, and was responsible for nineteen survivors coming ashore in two boatloads, along the fired line. Dennett’s rocket received national fame, and a one-year contract to supply rockets to the Coastguards. He became known as ‘Rocket Man’ and his rockets were used in rescues at least until 1890, when his son Horatio was running the business. A rocket weighing 23 lb would have a range of about 250 yards (228 metres), on average. Saving lives in Warrnambool – The coastline of South West Victoria is the site of over 600 shipwrecks and many lost lives; even in Warrnambool’s Lady Bay there were around 16 known shipwrecks between 1850 and 1905, with eight lives lost. In 1859 the first Government-built lifeboat arrived at Warrnambool Harbour and a shed was soon built to house it. In 1858 the provision of rocket and mortar apparatus was approved for lifeboat stations in Victoria, and in 1864 a rocket house was built to safely store the rocket rescue equipment. In 1878 the buildings were moved to the Breakwater area, and in 1910 the new Lifeboat Warrnambool arrived with its ‘self-righting’ design. For almost a hundred years the lifeboat and rocket crews, mostly local volunteers, trained regularly to maintain their rescue skills. They were summoned when needed by alarms, gunshots, ringing bells and foghorns. Some became local heroes but all served an important role. By the end of the 1950s the lifeboat and rescue equipment had become obsolete. Rocket Rescue Method - The Government of Victoria adopted lifesaving methods based on Her Majesty’s Coast Guard in Great Britain. It authorised the first line-throwing rescue system in 1858. Captain Manby’s mortar powered a projectile connected to rope, invented in 1808. The equipment was updated to John Dennett’s 8-foot shaft and rocket method that had a longer range of about 250 yards. From the 1860s the breeches buoy and traveller block rocket rescue apparatus was in use. It was suspended on a hawser line and manually pulled to and from the distressed vessel carrying passengers and items. In the early 1870s Colonel Boxer’s rocket rescue method became the standard in Victoria. His two-stage rockets, charged by a gunpowder composition, could fire the line up to 500-600 yards, although 1000 yards range was possible. Boxer’s rocket carried the light line, which was faked, or coiled, in a particular way between pegs in a faking box to prevent twists and tangles when fired. The angle of firing the rocket to the vessel in distress was measured by a quadrant-type instrument on the side of the rocket machine. Decades later, in about 1920, Schermuly invented the line-throwing pistol that used a small cartridge to fire the rocket. The British Board of Trade published instructions for both the beach rescue crew and ship’s crew. It involved setting up the rocket launcher on shore at a particular angle measured by the quadrant, inserting a rocket that had a light-weight line threaded through its shaft, and then firing it across the stranded vessel, the line issuing freely from the faking board. A tally board was then sent out to the ship with instructions in four languages. The ship’s crew would haul on the line to bring out the heavier, continuous whip line, then secure the attached whip block to the mast or other sturdy part the ship. The rescue crew on shore then hauled out a stronger hawser line, which the ship’s crew fixed above the whip block. The hawser was then tightened using the block on the shore end of the whip. The breeches buoy and endless whip are then attached to the traveller block on the hawser, allowing the shore crew to haul the breeches buoy to and from the vessel, rescuing the stranded crew one at a time. This rocket launcher machine is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Rocket launcher, named a Rocket Machine, and storage box. Launcher has a long open metal channel with a spike at the base, and narrow, rectangular device, which is the line-firing rocket machine, at the top, all painted blue. Two hinged wooden legs are attached where the channel and machine meet. The side of the machine has an oval cut-out window and an attached quadrant, or protractor, with a plumb-bob on it. The quadrant has angles marked in degrees. The long protective box has white stencilled letters along the side. Its lid has three hinges and is fastened with two metal latches.On box “ROCKET MACHINE” On quadrant “10” “20” “30” “40”flagstaff hill maritime museum & village, flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck, life-saving, lifesaving, rescue crew, rescue, rocket rescue, maritime accidents, shipwreck victim, rocket crew, beach rescue, line rescue, rescue equipment, rocket firing equipment, rocket rescue equipment, rocket apparatus, beach apparatus, petticoat breeches, breeches buoy, rocket house, rocket shed, lifeboat men, rocket equipment, rocket machine, rocket head, rocket launcher, rocket line, marine technology, william schermuly, line-firing pistol, line throwing gun, schermuly pistol, pistol rocket apparatus, beach rescue set, traveller, block, running block, pulley, hawser, faking, faking box, faked line, rescue boat, lifeboat, lady bay, warrnambool harbour, port of warrnambool, tramway jetty, volunteer lifesavers, volunteer crew, breakwater, lifeboat warrnambool, rocket rescue method, rocket rescue apparatus, captain manby, mortar, henry trengrouse, sky rocket, john dennett, shore to ship, colonel boxer, two-stage rocket, italian hemp, quadrant, protractor, schermuly, line-throwing pistol, line throwing cartridge, rocket apparatus rescue, stranded vessel, tally board, light line, whip line, endless whip, petticoat buoy, traveller chair, traveller block, her majesty’s coast guard, harbour board, line thrower, line throwing, beach cart, hand barrow, sand anchor, hawser cutter, life jacket, faking board, welsh hand barrow, rocket set

In the words of the donor, Betty Stone, "This fitted writing slope box belonged to Ellis Dale of “Latrigg”, Wangoom, Warrnambool, and has an inscription “E. Dale”, hand written by Ellis on a small brass plaque featured on the lid. Ellis Dale, born 21 November 1860, was the second son of William and Elizabeth Dale, of Dale Bluestone Quarries Wangoom. He worked with his father at the quarries, and continued, after his father's death, to operate the family business with his son lvor until he died, aged 79 years, on 2 August 1940. Although the tradition was that the writing box was originally owned by Ellis's father, William Dale, there is some doubt that he brought it with him from England when he migrated in 1852 - however, we do know that it is at least one hundred years old. (Note: For additional information please refer to my book “Pioneers and Places - A History of three Warrnambool Pioneering Families” ie. Chamberlain, Dale and Lees Families)This item is associated with the Warrnambool pioneer families of Chamberlain, Dale and Lees. These families are listed in the Pioneers' Register for Warrnambool Township and Shire, 1835-1900, published by A.I.G.S. Warrnambool Branch. The item is significant for its association with a ‘glory box’ or hope chest’, a tradition of single ladies making and collecting a range of linen and other domestic items in preparation for their future marriage.Polished wooden Writing Slope or Travellers Desk. Owned by Ellis Dale. Box opens to be a sloped writing desk, with a leather writing surface decorated with a gold leaf border, and several compartments; one has a slightly concaved cover that pivots to open. Leather-covered boards hinge at the centre, and both sides lift, revealing further storage. Brass protectors on top corners, inlaid brass strengthening supports on two corners. Brass slide-releasing catches secure writing base as desk closes. The brass shield centre of the lid is engraved. Part of the 'Chamberlain Dale Lees Collection.Engraved shield on lid "E.Dale / Wangoom"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, chamberlain, dale, lees, stone, betty stone, warrnambool pioneers, writing slope, writing box, traveller's desk, portable desk, lap desk, ellis dale

Set of 12 Digital Images of the recovery of tram 18 from Victory Park, Colour photographs of BTPS recovering SEC tram No. 18 from Victory Park Sebastopol, 2/11/1982. The tram was provided by the Borough of Sebastopol. Barry James Cranes lifting the tram from just outside its storage shelter. Tram showing destination of Depot. Photos taken at Victory Park, in transit and being off loaded at the depot. See Reg Item 1414 and 7777 for other photographs of the day. Digital Images from the original slides, pending transfer of the originals.trams, tramways, borough of sebastopol, tram recovery, sebastopol, barry james, btps, tram 18

The Kew Historical Society’s collection includes a wide range of leisure objects. Many of the items are European-made, generally of British origin, however there are a number that were made for the Australian market by Australian manufacturers. There were clearly a huge range of toys produced for the Australian and International children’s market in the Nineteenth and Twentieth centuries. The examples of toys in the collection include examples of alphabet toys, arcade toys, baby toys, construction toys, dolls, doll accessories, educational toys, soft toys, tin toys, toy animals, toy blocks, toy machines, toy typewriters, etc. Box of two dimensional animals cut from wood including deer, camels, horses etc. The box includes one intact paper hand coloured template of a horse and duck. On this item there is the number LXXVIII. All of the items are housed in a cardboard box produced by Walker Stores Pty Ltd, 471-5 Sydney Road Coburg. The box also states that there was a retail outlet at Glenferrie Station. Inscribed on the box is the name Mr Edward Smith, 16 Macartney Avenue, Kew. The box is not related to the contents apart from probably being used for long term storage.puzzles, toys

Singer was first established as I. M. Singer & Co. in 1851 by Isaac Merritt Singer with New York lawyer Edward C. Clark. Best known for its sewing machines, it was renamed Singer Manufacturing Company in 1865, then the Singer Company in 1963. The Singer company began to market its machines internationally in 1855 and won first prize at the Paris world's fair that year. They had offices established in both Sydney and Melbourne by the mid-1960s. The company demonstrated the first workable electric sewing machine in 1910. Singer was also a marketing innovator and a pioneer in promoting the use of instalment payment plans, making their machines more affordable for many people. According to its serial number, this machine was manufactured in 1950 and was one of the new models designed to be more portable as it only weighed about 10 KG.This sewing machine is of local, national and international significance as it represents developments in technology and the impact this had upon the work of women.The Singer 99 was a sturdy and reliable machine that was easy to use. Lighter than other machines of its time, this machine weighed only 10 Kgs. It is mounted on a wooden base with a small compartment under the balance wheel to store accessories and bobbins. It has a 'Bentwood' (polished plywood) cover which also provided some room for storage. The machine is driven by a small electric motor and a light to illuminate the work area. It is decorated with gold decals and a filigree pattern. It includes a knee control which is inserted in a hole at the front of the machine. The serial number EG045782 indicates it was manufactured in 1950.Across the top in gold script: "The Singer Manufacturing Co. / Made in Great Britain" On light cover: "SINGER" Plate with specifications also attached. On front of machine in oval badge: A CENTURY OF SEWING SERVICE/ THE SINGER MANFG. CO. 1851 - 1951singer sewing macnine, domestic appliances, women's work, technology

Black and White photograph of BTPS No. 11, 671, 661 and 14 stored in the BTPS's rented storage building in Sebastopol c 1979. Photo taken after the return of No. 14 from Melbourne after its running in the 1979 Australia Day parade. and before its move back to the BTPS depot in November 1979 when 14 and 11 were moved to the depot - see March 1980 Fares Please! and Dec. 1979 issue of Trolley Wire. Photo appeared in Trolley Wire c1980? See March 1980 Fares Please, Dec. 1979 Trolley Wire tramways, trams, btps, depot, sebastopol, tramcars, tram 11, tram 671, tram 661, tram 14

BHS CollectionDiggers & mining. Life Of The Selectors. Minor sitting in front of his makeshift hut smoking a cigarette. Some of the necessities of a miner which are visible in the picture are; wheelbarrow, barrel for a table, buckets, shovels, axe, gold pan, hand saw, tin cup, wash board, axe, frypan horse collar, saw horse/also doubles as a seat, barrel/also used for storage, large pan, fresh fish hanging. Markings; Life Of The Selectors 1860-1890. Set 432 No. 5. Selector's Hut, East Gippsland - photo by N. J. Claire, 1884. Used as a teaching aid.Visual Education Centreeducation, tertiary, goldfields

Set of six photocopied plans or drawings on A3 sheet of Clifton Hill car shed - 3/1937 Some of the sheets overlap with each other. .1 - P? - Plan showing depot block, building plan and track plans .2 - P7689 - Plan of Land - dated 6-3-1937 .3 - P7690 - same as sheet one, but shows date and drawing number .4 - P? - part of shed with notes hand written on it - changes made to buildings - notes condensers and gas storage - possibly for the gas producer buses. .5 - part of plan with hand written notes .6 - dittotrams, tramways, drawings, depots, property, clifton hill cable tram depot, cable trams, world war 2, buses

Black and white photograph of Freight Car 206 at Preston Workshops. This tram began as one of 10 single truck saloon trams built by J.G. Brill & Co., USA and assembled by Duncan and Fraser, Adelaide. It entered service for the NMETL as tram number 5 on 13/10/1906. It was transferred to MMTB and renumbered as U class tram 206 on 1/8/1922. It was withdrawn from service in 1938 and was converted to a freight car. In November 1947 it was withdrawn from service as a spare freight car after a bad accident and remained in storage until March 1950 when it was scrapped.trams, tramways, freight tram, preston workshops, nmetl, tram 206

In 1947 it was proposed to construct a dam on the Pretty Valley branch of the East Kiewa River. This was part of the initial planning in 1937. The Pretty Valley Reservoir was to be part of a pumped-storage scheme with a pumping station located immediately below the main structure. Preparatory work was commenced in 1946 with erection of staff accommodation. Between 1947 and 1950 the main camp was erected, access roads, constructed and banks and benches at the dam site undertaken. Following the financial crisis in 1951, a review of the scheme was carried out and work ceased in June 1951. Construction of the dam was deleted from the programme of works and all buildings removed.A pictorial history of part of the initial planning in 1937 for a dam to be constructed at Pretty Valley as part of the Kiewa Hydro Electric Scheme.7 small black and white photographs of Pretty ValleyAll photos have a circular stamp on the back with 'Print by Willson White Albury' enclosed. Photo 1 - on the back, handwritten in ink 'New 22Kv pump line - Pretty Valley Nov. 1948'. In pencil '18'. Photo 2 - On the back, handwritten in ink 'Pretty Valley - Staff mess on right Nov. 1948'. In pencil '18'. Photo 3 - On the back, handwritten in ink 'Pretty Valley Basin - looking S.E. Nov. 1948'. In pencil '5'. Photo 4 - On the back, handwritten in ink 'New pump 22Kv line, Pretty Valley - looking towards Mt. Mackie. Nov. 1948'. In pencil '5'. Photo 5 - On the back, handwritten in ink 'Pretty Valley. Mt. Cope just out of picture extreme right. Nov. 1948'. In pencil '78'. Photo 6 - on the back, handwritten in ink 'View from Pretty Valley Ruined Castle in Background Nov. 1948'. In pencil '78'. Photo 7 - on the back, handwritten in ink 'Pretty Valley Pump line (Nov. 1948)'. In pencil'78'.construct, dam, pretty valley

This refillable ink bottle was extensively in use in the early 1900's, firstly with the nib pen and then with the fountain pen. Both these pens required to be refreshed with ink as they had no long term self storage capacity. The requirement, before the 1970's, for all legal documents, wills and heath certificates etc. forms had to be signed with penned ink and not biro(1950's onward). This caveat was to prevent forgeries (signatures) from ocurring. Hand writing experts can clearly distinguish forgeries because by using nibs, the "natural" and distinctive hand inflections whilst forming the signiture cannot be replicated by forgers.This item is significant to the Kiewa Valley because it details that even in the rural sector,(Kiewa Valley) the legal requirements of the day had to be adhered to. This was even at a time when in the rural areas a "man's word and handshake" was his bond", especially between neighbours or others in a small rural region. This however was not the case for Government Departments , banks and the hospital. To highlight certain words or paragraphs due to their importance, the red ink application was not only highly visible but also less likely to be tampered withThis is a clear thick glass bottle with shoulders tapering up to the neck. The red stain on the cork stopper indicates that the bottle contained red ink.On one side is embossed "ANGUS & C0" and on the base "J 32" and below this "M" (the manufacturer's mark)dip pen ink, ink bottle, writing methods, nib.

This refillable ink bottle was extensively in use in the early 1900's, firstly with the nib pen and then with the fountain pen. Both these pens required to be refreshed with ink as they had no long term self storage capacity. The requirement, before the 1970's, for all legal documents, wills and heath certificates etc. forms had to be signed with penned ink and not biro(1950's onward). This caveat was to prevent forgeries (signatures) from ocurring. Hand writing experts can clearly distinguish forgeries because by using nibs, the "natural" and distinctive hand inflections whilst forming the signiture cannot be replicated by forgers.This item is significant to the Kiewa Valley because it details that even in the rural sector,(Kiewa Valley) the legal requirements of the day had to be adhered to. This was even at a time when in the rural areas a "man's word and handshake" was his bond", especially between neighbours or others in a small rural region. This however was not the case for Government Departments , banks and the hospital. To highlight certain words or paragraphs due to their importance, the red ink application was not only highly visible but also less likely to be tampered withThis empty bottle is cylindrical with curved "shoulders" tapering to a neck the size of a 20c coin. It has a white screw on lid bearing the name SWAN triple filtered INK. There is a paper label on the side of the bottle.SWAN TRIPLE FILTERED INK. 'SWAN' INK PERMANENT BLUE BLACK MABIE TODD & CO (AUST) PTY LTD SYDNEY CONTENTS 1 1/2 FLUID OZS.dip pen ink, ink bottle, writing methods, nib.

This book was discovered beneath the floor of a former Ballarat School of Mines office during renovations in 1970. It appears to have been placed there in safe storage, then forgotten for decades. Both State Library of Victoria and Monash University have a full run of all 10 volumes of Recueil de planches sur les sciences, les arts libereaux, et les arts mechaniques avec leur explication. This copy is the sixth volume, and contains 294 pages. School of Mines stamps are dated 1870. Etchings by Benard Fecit and Louis-Jacques Goussier (1722-99). Goussier was a French illustrator and encyclopedist.Large hard covered book of 294 beautifully printed plates on handmade paper. Each plate has descriptions written in French. Along with animals and natural history the images also include mining, metallurgy and mineralogy. Rebound in 1987 with green cloth and leather spine and corners. Gold lettering on the spine. Ballarat School of Mines stamp on the back of each image, dated 1870.printed plates, animals, natural history, metallurgy, mineralogy, mining, minerology, etching, 1768, french, science, briasson, david, le breton, sixth volume

This two level Liquid Level Sensor is an aid which prevents cups from being overfilled with 2 levels of liquid. The unit simply hangs over the side of a cup or glass with the probes on the inside. Ideal for making a cup of tea or coffee with milk. Simply pour in the hot water stopping when a pulsating tone is heard then pour in milk stopping when a continuous tone is heard. Can also be used as a single level sensor such as for non mixed drinks. Handy magnets on the back of the unit allow for easy storage on fridge or other metal object. Uses a 12V battery. 1 black liquid sensor with 2 magnets assistive devices, equipment

Breakwater navigation lights are placed at the end of the breakwaters to warn incoming vessels of the end of the structure, as a marine safety measure. The subject item was such a light believed to have been placed at the end of Warrnambool's breakwater around 1915 when it was extended. The light had remained in place for many years until it was probably removed when the structure was undergoing rock armouring repairs to the end of the breakwater in 1975. The light had been placed in a council storage shed probably from the time when the structure was undergoing these repairs in 1975. In 2014 the light was removed from the storage shed and donated to Flagstaff Hill museum. History: Warrnambool breakwater plans were drawn up by 1874 and approval was given for preliminary construction work to start but when the money ran out, the works stopped. With a number of quick changes of government the “Warrnambool” breakwater project was kicked from one Victorian state government to another. Then finally in 1879, the eminent British harbour engineer Sir John Coode was asked to design a breakwater. His first design was for a 1800 feet long structure but that was scaled back to 900 feet and construction finally began in 1884. This structure was attributed in causing major siltation of Lady bay, as a consequence the breakwater was again extended in 1915. In 1975, the rock armouring at the end of the breakwater was added but by 1979 another impact study was calling for the breakwater to be removed altogether. The Heritage Council Victoria, regard the Warrnambool breakwater is of historical significance to the state as one of the most important maritime engineering projects that was undertaken in Victoria during the late nineteenth century. The light is also as part of this structure regarded as a significant item of historical interest.Marker light or navigation light. Round light stand with conical top piece (2 separate pieces). Metal base painted red, clear glass middle section enclosed by metal frame, metal cone shaped top section painted silver. Electrical wiring can be seen inside centre section. Pole that light would have been on to elevate it is missing.Has metal plate screwed onto side of base engraved "23". flagstaff hill, warrnambool, shipreck coast, flagstaff hill maritime museum, maritime museum, great ocean road, warrnambool breakwater, marker light, naviagtion light, breakwater navigation light

This example of a sailing ship’s ‘dead-eye’ is from the wreck of the LOCH ARD, which sank near Port Campbell in 1878. The vessel was an iron hulled clipper ship constructed for the Loch Line in 1873. It was part of a fleet of similar merchant ships owned by that company, which specialised in bringing passengers and goods from London via the Great Circle route to Melbourne, and returning to Britain via Cape Horn with the colony’s wool clip. Deadeyes were a common feature of sailing ship technology in the nineteenth century. They were a simple, cheap, and hard-wearing device that, in conjunction with another deadeye, provided an effective means of levering, or tightening, attached ropes and stays. Lower deadeyes were fixed to the sides of the ship by an encircling metal collar (inset in a flattish groove chiselled around the outer circumference of the disc), which was bolted to iron bars attached to the hull (called chain-plates). Upper deadeyes were looped by a strong hemp or wire rope (inset in a rounded groove carved around the outer circumference of the disc), which was joined to the bottom ends of the rigging which reached up to secure the masts into position (called shrouds or stays). Connecting a Lower deadeye to its corresponding Upper deadeye was a rope (called a lanyard) which looped up and down through the three “eyes” of each disc, to form a pulley system. The hitching of the two deadeyes with a looped lanyard provided the means of tightening, or loosening, the tension on the mast rigging ― essentially by pulling against the chain-plates bolted to the outside of the hull. It was a procedure that could be performed by sailors at sea and in emergencies. For example, after a gale the stays may have stretched and the masts worked loose, requiring retightening. Or, in the extreme circumstance of shipwreck, the lanyards might need to be released on the weather side, so that the masts fall away from the stricken vessel. The shipwreck of the LOCH ARD is of State significance. Victorian Heritage Register S417.A well-preserved ship’s deadeye with wire loop rope still attached. The original tar coating for water-proofing still remains, colouring the entire artefact black. It is wrapped in hessian cloth and hemp cord and is currently in storage under secure and stable conditions. This deadeye was recovered from the wreck of the LOCH ARD. The artefact is a typical deadeye, comprising a thick round wooden disc, pierced by 3 similarly sized and shaped holes from one flat side through to the other, in a triangle formation. The survival of the wire cable loop-rope suggests it was an Upper Deadeye, connected to the shrouds (mast rigging). Previous number PWO 2388.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, deadeye, loch ard, rigging