J. Mann and Sons was first established as a farm produce store in 1921. The range of products was extended in the 1930s and included groceries and hardware, as well as the first petrol bowser in Wodonga outside the store. After WWII, the premises were extended and the range of products continued to increase. In the 1960s the Mann Family opened a new supermarket in Wodonga, in addition to the hardware business, providing steel, plumbing and industrial supplies, and they employed over 100 people at one stage. With changes in the retail industry, the Mann Family sold the main hardware business to Bunnings and the produce business to the Kelly brothers in 2006.This item was an important everyday feature in many stores when items were wrapped in brown paper before the introduction of plastic bags.The paper dispenser has a wooden top and base, with a cast iron frame and lever. There is a removable metal rod which holds the paper roll in place. It was used for dispensing brown wrapping paper. The Blade" lever is not sharp, but was used to stabilise the paper roll so the paper can be easily torn off at the required length. An empty paper roll is included.mann wodonga, wodonga businesses

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the plaque has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Copper metal plaque commemorating 10 years of the Sarah Coventry Pty. Ltd. jewellery company from 1968 to 1978, in a brown wooden fame. The inscription is in black and flock printed on the copper plaque with '10' in the central of a flower motif."Sarah Coventry. / 10 / 10th Anniversary 68-78"sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, copper plaque, commemorative plaque

This style of geared drill was commonly referred to as an egg-beater drill and was first patented in 1838. During the late 19th century these drills became more common due to the development of mass production. Users also began to mount the drill onto a frame. This allowed greater control over the drill and removed the need to be holding it in both hands. This gave the operater greater control over the item to be drilled. The drill could be easily removed when required. This item is an example of a domestic woodworking tool commonly used before the widespread use of power tools. The construction of the basic wooden frame also demonstrates the ingenuity of early pioneers and tradesmen in adapting tools to suit their own needs.A metal hand drill which has been mounted on to an improvised wooden stand. hand tools, mass production, egg beater drills

This item is representative of grinding stones used throughout Australia to enable people to maintain farm and domestic utensils.A large circular grinding stone with metal handle. It was used on a stand and also with water to shapen blades such as knives, axes and hand shears. The wheel is a large cirle of sandstone. These were common in the late 19th and early 20th Century. It would have been used on a wooden frame.domestic tools, household utensils

high quality race sulky manufactured by Royal Speed, Adelaide. Royal Speed Sulky, Pinevale Stud Hickory shafted , chromed metal undercarriage and fittings. Wire spoked wheels with rubber inflatable tyres. Yellow frame with blue seat.Pinevale Studtrotting, sulky, royal speed, pinevale stud

Rectangular frame with coiled metal wires on two opposite sides. Symmetrical placement of screws with connecting wires and terminals between the two sides. Removable cylindrical pin through center of top plate. Four smaller coils of wire secured to underside of top plate. Object rests on ends of three screw feet, two forward and one rear.Engraved at center of top plate: ' H. TINSLEY & CO. LONDON S. E.' Engraved at lower centre of top plate: 'NO 16949' Engraved on top of cylinder pin: 'NO 19908' Front side of top plate engraved with: 'DEFLECTING COILS' Engrave on center base of front side: '10 / VOLTS' Left side of top plate label: 'NAT. PHIL. LAB. / NO 65 / UNIV. OF MELB.' Associated label separate to object also has inscription on recto: 'Schering & / Schmidt / Galvanometer' and upside down on verso: 'A. C / [r] [e] [...] Gold[l]ing / p.p. 245' (writing unclear)galvanometer, tinsley & co, schering & schmidt, electrical instruments, ammeters

This late 19th century maritime lamp is an example of lighting on ships, wharfs and other outside areas around docks and shipyards as well as on vessels.Lamp; grass and glass, with flat metal back and three glass windows. Has metal handle and wood hand piece. A brass lug on the back makes provision for attaching to a socket on a wall. The chimney lid flips upwards. The right-side door frame has a sliding latch, and the edge behind has a sliding panel to allow air flow. Made in Birmingham by Alderson & Gyde Limited in 1886."Alderson & Gyde LTD 1886 Birmingham" flagstaff hill, warrnambool, shipwreck coast, flagstaff hill maritime museum, maritime museum, maritime village, alderson & gyde ltd, birmingham, lamp, lantern, wall lamp, marine equipment, maritime light, wall light, 1886, ship lighting

The Englishwoman's Domestic Magazine was issued monthly in the following years: 1852–1874; 1877; 1880–1890. Initially, it contained only nondescript black and white images. Aware of the growing interest in fashion, style and manners from the new middle classes, Samuel Beeton began to import tinted fashion plates directly from Jules David in Paris from 1860. Primary source for fashion design in the 1860sFramed fashion plate -'The Fashions … for the Englishwoman's Domestic Magazine'. Framed print of two women in 1860 costume. Bordered in pale green coloured card. Wire attached to metal loops at back. Masking tape at back.fashion illustration, englishwoman's domestic magazine

The Young Ladies Journal was first published by E. Harrison. It was issued from 1864 to 1920. Framed fashion plate from the Young Ladies Journal. Two women in 1864 costume, one blue, one monochrome. Bordered in pale green coloured card. Wire attached to metal loops at back. Masking tape at back.fashion illustration, ladies home journal

Demonstrates how the SEC used enameled signs to convey instructions to passengers, and confirm the advice of the conductor.Enameled metal sign, black capital letters and border lines on an off- white background. Reverse enameled in black. Sign reads "Passengers must not travel in this compartment". The writing appears to have been stenciled over the white enamel base. The enameling has broken away from areas near the two screw holes formed to attach the sign to the compartment. An attempt has been made to address damage with paint. Enamel on reverse is marked where the sign appears to have been laying on a frame prior to firing. tramways signs, passenger information signs, enameled signs

The sons of a spirits dealer, Andrew and John Usher created one of the world’s most successful blended Scotch whiskies, Old Vatted Glenlivet, and played a key role in building the North British distillery. But they were also responsible for one of the most misunderstood lawsuits in Scotch history – the trademark battle for ‘Glenlivet’. Iain Russell reports. Three badly damaged paper labels on the back. A mirror is mounted on a one centimetre thick, 67 by 43 centimetres wooden frame with 18 centimetres by three centimetres decorative extensions on all sides. there two pieces of metal on the top to hang the mirror. A box nine six by four centimetres is mounted on each side, one is labeled MATCHES and the other CIGAR CUTTER both have ANDREW USHER & Co written on them. Behind the glass is gold coloured writing with black shadows stating USHER'S "SPECIAL RESERVE" & "O.V.C." WHISKIESpub mirror, andrew usher, o.v.c. whiskies

1905-1933.The bandage winding machine wound calico bandages for patient use. A sheet of calico was torn into strips of differing widths and a length of around 8 feet or 240 cm. The bandage was wound around the handle shaft, by hand initially, to get purchase, then the handle was turned until the bandage was tightly wound. Bandages were reused after being washed, dried and rewound on the machine.bandages, bandage winding machine, nursing practice, Alfred HospitalAn open wooden frame with six horizontal struts. At the top of the frame is a metal shaft which winds and holds the calico bandage. . It sits on a solid wooden base, 4 curved corners. 2 solid wooden end plates.Marked from Ward 1 on outside of end plate in black inkbandages, bandage winding machine, nursing practice, alfred hospital

The wooden crate contains a set of patterns or moulds that were once used at Briggs’ Brass Foundry for making sand moulds. The traditional method of sand casting is over 2000 years old. It is part of a crafted process used to make brass and copper alloy goods suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-corrosive and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry display was one of the early ‘working craft’ shops at Flagstaff Hill. It included a historic Cornish chimney that was set up as a working model, telling the story of heat from furnaces to smelt metal, which would then be poured into the sand moulds. This chimney is made from specially curved bricks and is about two-thirds of its full height when originally located at the Grassmere Cheese factory. HISTORY of BRIGGS BRASS FOUNDRY: - The family business was founded in 1912 by Herbert Harrison Briggs (1963-1931) with his son George Edward Briggs, trading as Briggs & Son Foundry at 70 Wellington Street, Collingwood. Younger son Cyril Falkiner McKinnon Briggs joined the foundry in 1922, and it was renamed H H Briggs & Sons Foundry. Both sons ran the firm after Herbert’s death in 1931, making products mainly for marine purposes. They became Bell Founders in 1936 and were known for their specialty of high-quality ship bells. They produced miniature varieties of these and other decorative items such as small propellers. The firm became known as Briggs Marine Foundry. The great-granddaughter of Herbert Briggs inherited the Briggs Brass Bell, similar to the one at Flagstaff Hill. Cyril became the sole family member of the firm in 1965. The Briggs Marine was an exhibitor at the 1965 Boat Show, where he advertised as “non-ferrous founders” and “Bell Specialists”. The foundry relocated to Chesterville Rd, Moorabbin. Cyril passed away in 1967. It is thought that either Cyril or his business partner Frank Lee donated the objects from the Briggs’ Foundry around the time when the business moved to Moorabbin. However, Flagstaff Hill hadn’t been thought about until 1972. The donated items were registered in the Collection in 1986 but they could have been in storage from an earlier date. In October of that same year, Briggs Marine restored Schomberg Bell, a shipwreck artefact from the collection at Flagstaff Hill. Peter Oram, who had worked for the previous owners of Briggs Marine as a fitter and turner, took over the firm in 2014, reviving some of the old casts for current use. The business is now located at Seaford in Victoria and is part of Alliance Casting & Engineering Solutions (Alliance Casting Pty Ltd). In 2016 the original Collingwood Foundry building was repurposed as a thriving business hub named The Foundry. The crate and its patterns are significant for their association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. The patterns are associated with the long-running firm, Briggs Brass Foundry, that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine is also associated with the Schomberg Bell in Flagstaff Hill, restoring the bell to is former state to show an example of the bell from a luxury mid-19th century vessel. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. Wooden rectangular crate with removable wooden lid. Inside is a set of wooden patterns of various shapes and sizes for making sand moulds in a metal foundry. The crate is made from thick wooden planks nailed together. The extended wooden struts on the long sides form a frame to hold the wooden lid. A pair of metal handles are at each short end of the crate, fixed with strong metal bolds. Between each pair of handles is an inscription stamped into the wood. The underside of the crate has red paint splashes. There are insect holes in the wood but no sign of current infestation. Stamped: "H.33 / II" (H may be N or a square B)flagstaff hill maritime museum and village, great ocean road, shipwreck coast, pattern, mould, foundry, brass foundry, metal foundry, crate, box, wooden container, briggs, traditional method, trade, sand cast, cast, brass alloy, copper alloy, marine equipment, marine tools, marine fittings, briggs' bronze, copper tin zinc lead, non-corrosive, briggs family, brassware, metalware, foundering, metalwork, maritime, casting, cornish chimney, curved bricks, grassmere cheese factory, 1912, herbert harrison briggs, h h briggs, george edward briggs, briggs & son foundry, collingwood, cyril falkiner mckinnon briggs, cyril briggs, h h briggs & sons foundry, bell founders, schomberg bell, alliance casting & engineering solutions, collingwood foundry, ship chandlers, marine products, flagstaff hill, warrnambool, maritime museum, maritime village, briggs & son brass foundry, briggs marine, moorabbin

Children played 'Mother and Fathers' when young so a dolls pram was very common as it still is today. A plastic white wicker dolls pram with orange and tan trim on the hood and carriage, and is held together by metal staples. It has a long curved cane handle and a wooden dowel frame. The base is wooden with four red plastic wheels with black trims for tyres. dolls prams, toys, dolls accessories

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; an unpainted, rectangular wooden frame with a top and sides, similar to a small rectangular stool. A solid half-cylinder shape was added under the horizontal 'seat' with another smaller half-cylinder attached to it, end-to-end. A string is tied between two metal loops attached to the back. There are two X marks stamped into the back. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.Stamped: "X" "X"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

This men's grooming set of personal care equipment and toiletries is an example of items packaged in attractive cases and sold as gifts in Australian chemist outlets and department stores in the 1920s to 1940s. This set was originally packaged in a leather-covered, lined and fitted case, with a comb, hair brush, and razor included as well. as the items shown here. The razor, once included with the set, had the inscription "T.R. Cadman and Sons, Sheffield England". The family business began with Luke Cadman in 1748. Thomas Radley Cadmen (1833 - 1917) took over the business in 1871, by which time it was operating in Sheffield. The business became incorporated as T.R. Cadman & Sons in 1924 but shortly afterwards the straight razors manufactured by them were stamped T.R. Cadman & Sons Ltd. The company specialised in pocket knives and razors from 1933 and supplied the British Royal Navy with razors in WWII. Over 80 per cent of sales were for the overseas market including Australia. Some of their razors were sold in stores in Victoria. The business traded in 1965. This grooming set was donated for exhibit in Flagstaff Hill Maritime Museum and Village's exhibit of the vessel 'Reginald M', a two-masted coastal trading ketch built in Port Adelaide in 1922. These items are examples of personal objects sold in Victoria in the 1920s as gifts for men, cased or packaged for special occasions and sold in retail stores. The items are associated with the historic coastal trading ketch 'Reginald M', listed on the Australian Register of Historic Vessels; and active from 1922 until 1975. The items were displayed in the Master's Quarters of the Reginald M exhibit at Flagstaff Hill Maritime Museum and Village until 2016 when the ship was decommissioned from Flagstaff Hill's fleet.Men's grooming set; metal soap container with star decoration, oval soap cake, oval hand mirror in a black frame ten-sided clear glass cologne bottle with silver metal lid, yellow bristle clothes brush with brown wooden hand grip, yellow bristle shaving brush with black base and white body, and two button hooks with white handles; the larger one has floral motifs. Inscriptions were on the razor originally included in the grooming set.Soap container once had star motifs.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, grooming set, men's grooming set, personal grooming, toiletry set, personal care, soap box, soap container, cologne bottle, clothes brush, shaving brush, button hook, hand mirror, personal efects, toiletries, t.r. cadman & sons, reginald m, soap dish

Charles Wright No 825 enlisted in G Coy 7th Batt AIF on 18.8.14 age 20 years, embark for Eygpt 19.10.14. Reported WIA and missing 25.4.15. A court of enquiry confirmed KIA 23.9.17, no known grave. George Edwin Wright No 5241 enlisted in 16 reinforcements 6th Batt AIF on 9.12.15 age 18 years 4 months. Embark for England 1.4.16, embark for France 29.8.16. KIA 8.12.16, no known grave. Thomas Stanley Wright No 5242 in 16th reinforcements 6th Batt AIF on 21.12.16 age 21 years. Embark for England 1.4.16, embark for France 29.8.16, WIA 29.4.17 GSW to chest, return to unit 10.9.17, awarded the Military Medal 4.10.17 at Broodseinde Ridge near Ypres, WIA in same action GSW to Abdomen. Discharged from the AIF 23.1.1920. Refer 781.2P, 1227P. Display, framed, covered with glass. Contains 2 Commemorative plaques - CHARLES WRIGHT & GEORGE EDWIN WRIGHT. One 1914/1915 Star on its own. Display in depth holds Victory Medal, Military Medal, British War Medal and small brass badge or medallion - THOMAS STANLEY WRIGHT.Engraved white on metal labels: Top: COMPLIMENTS MRS JEAN GERBES NEE WRIGHT FOR THE WRIGHT FAMILY IN MEMORY OF CHARLES J AND GEORGE EDWIN - WRIGHT Middle behind glass: THOMAS STANLEY WRIGHT MM 6th BTN On white label in black print: THOMAS STANLEY WRIGHT 5242 16th REO's Batt AIF Enlisted 21.12.15 age 21 Embarked 1.4.16 WIA twice Awarded MM 4.10.17 at BROODSEINDE RIDGE Discharged 23.1.20 Bottom: COMPLIMENTS MRS KATHLEEN WRIGHT AND FAMILY IN MEMORY OF HUSBAND AND FATHER THOMAS STANLEY WRIGHT MM See also 781.2Pnumismatics - medals/military, plaques, metalcraft

awards, victorian college of agriculture and horticulture, vcah, australian council on awards in advanced education, bachelor of applied science (horticulture), certificates

'Loren' (formerly James Hogg's house) is a two-storey gabled prefabricated house, constructed using broad-gauge corrugated iron and was originally erected at 60-62 Curzon Street, North Melbourne in 1853 for builder, James Hogg. By 1968 the building had deteriorated and it was dismantled and moved to Old Gippstown where it was re-erected and restored. The building's external framing system consists of exposed metal columns with Gothic panel motifs at the corners. Internally the timber framed walls have been finished with new papers over new Hessian. The corrugated iron roof has an unusual concave form and the windows, floors and doors are of moulded softwood. State historic significance as a rare type of iron prefab. house. Listed on the Victorian Heritage Register and covered by a Heritage Overlay, Latrobe City Planning Scheme. It is also listed on the Register of the National Estate.Tall square-shaped two-storey corrugated iron building with a curved corrugated iron roof with two outside brick chimneys. prefabricated iron houses, old gippstown, west gippsland, gippsland, gippsland heritage park, goldfields, coal mine, victorian era, moe, historical village, city of melbourne, north melbourne, curzon street, james hogg, prefabricated house, two-storey gabled prefabricated house, old gippstown heritage park, latrobe valley, loren, latrobe city council

Framed certificate or presentation to Ron Scholten when he retired from Malvern depot in 2011 after 32 years of service for the tramways. Titled "Ron Scholten - This is your life", outline's Ron's tramway life as a young enthusiast, work at 332 Flinders St (the Shoe shop), TMSV, MMTB, trip to Germany for Siemens. Printed onto sheets with tram photos top or bottom, has been framed with a black cardboard trimmed for the sheets of paper. Frame from a silver finished timber frame (outside edge covered in plastic), Perspex cover, timber backing with tape around rear edges metal hanging strips, with plastic covered wire and black plastic bumpers in the lower corners.trams, tramways, certificates, presentations, malvern depot

The pusher belonged to Edgar Alfred Unger and his wife Thelma Mary nee Richardson and was first used for their eldest daughter Marjorie in 1960. The Unger family lived on a property in Thurgoona which is now the location of the Thurgoona Golf Course. Edgar died on 3rd April 1957 in Thurgoona, New South Wales. Thelma Mary Richardson was a descendant of the Frauenfelder family which was amongst the first German Immigrants to arrive in the Albury district during the 1950s. She died on 14th December 2000 in Wodonga, Victoria.This item is significant because it shows one of the ways people improvised to meet various needs in the past.A home-made child's pusher with wooden frame and rubber-tyred and metal-spoked wheels.baby pusher, unger family, improvised baby items

This is a set of 23 photographs of cartographic, aero-triangulation and lithographic equipment, and personnel at the Army Survey Regiment, Fortuna, Bendigo circa 1979. Photos .8P to .23P were taken in Lithographic Squadron’s printing, Camera, proofing rooms and external buildings. Cartographic Squadron’s SGT Jim McDonald operated the Editwriter type setting machine, as shown in photo .2P for a couple years in a room on the top floor of Fortuna Villa. This is a set of 23 photographs of cartographic, aero-triangulation and lithographic equipment, and personnel at the Army Survey Regiment, Fortuna, Bendigo, c1979. Black and white photos are on photographic paper and mounted on manilla card. They were scanned at 300 dpi. .1) - Photo, black & white, c1979, Typesetting machine, ‘Editwriter’ Model 7500, SGT Jim McDonald. .2) - Photo, black & white, c1979, Processor Model ACP101 & dual disk module (attached to Editwriter). .3) - Photo, black & white, c1979, Duplicating machine, stencil process electric ‘Gestetner’. .4) - Photo, black & white, c1979, Comparator photogrammetric stecometer, modified ‘Carl Zeiss’, CPL Jack Elverd. .5) - Photo, black & white, c1979, Point transfer device ‘Wild PUG IV. .6) - Photo, black & white, c1979, Zoom transfer scope, stereo ‘Bausch & Lomb’ .7) - Photo, black & white, c1979, Stereoplotter analytical automatic, ‘APC/3-1’. .8) - Photo, black & white, c1979, Prophylaxis unit, ‘Densply/Cavtron’ .9) - Photo, black & white, c1979, Machine punch register (made by Bendigo Ordnance Factory). .10) - Photo, black & white, c1979, Plan printer 122cm (48”) wide. ‘Admel Bruning’ Model - 5003A. .11) - Photo, black & white, c1979, Metal halide printing lamp. ‘Violight 5000 HV’ .12) - Photo, black & white, c1979, Densitometer transmission or reflection, ‘Macbeth’ Model – TR 524 MD. .13) - Photo, black & white, c1979, Machine whirling vertical type ‘Payne VLW’. .14) - Photo, black & white, c1979, Densitometer reflection, ‘Macbeth’ Model – RD917. .15) - Photo, black & white, c1979, Densitometer reflection, 240V ‘Cosar’ .16) - Photo, black & white, c1979, Printer contact ‘Hohlux’ Model RP-II, LCPL Martin Van der Maele. .17) - Photo, black & white, c1979, Frame printing vacuum vertical. .18) - Photo, black & white, c1979, Frame printing vacuum flip top 91cm x 117cm. .19) - Photo, black & white, c1979, Printer reduction stereo plotter diapositive ‘Wild’ Model – U3A modified and U4A modified to U4A plus. .20) - Photo, black & white, c1979, Printing press offset rotary lithographic 3 colour ‘Ultra-MAN-III’ .21) to. 23) - Photo, black & white, c1979, Camera cartographic consolidated super 100 32” x 32”The three personnel appearing in this set are identified. Most items have a full description, NSN, serial number, and the Repairer’s name, address and phone details and contact name. Just the full description is documented.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr

Stereo-graphs were popular 1850 - 1930 Most stereoscopic methods present two offset images separately to the left and right eye of the viewer. Stereo-graphs feature two photographs or printed images positioned side by side about two and half inches apart, one for the left eye and one for the right. When a viewer uses a stereoscope, a device for viewing stereo-graphs, the two-dimensional images are combined by the brain to give the perception of 3D depth. The London Stereoscopic Company quickly developed technologies for mass - producing stereo-graphs; and between 1854 and 1856 the company sold over half a million stereo-graphs. Small, hand-held metal and timber steroeographic view-finder. The metal goggles are engraved with a free-flowing design. The rim of the goggles are covered in red velvet. A timber handle is attached with a metal hinge to the timber extension that has a wire frame to hold the stereo photographs. The streographic photos comprise 2 identical black and white photos mounted, side by side on brown card.Photocards 'ROSE'stereographs, stereoscopes, photographs, view-finder, wheatstone charles, london, moorabbin, melbourne, bentleigh, early settlers, market gardeners, entertainment, stereograph cards

Mrs. Priscilla Harvey was the sister of Mrs. Eliza Jane Harvey (Duncan Street Long Gully). She ran a Fruit shop in View Street opposite the Queen Elizabeth Oval.Oval framed photograph of Mrs. Priscilla Harvey. The frame has an outer edge of black painted wood, a central section of mid brown timber veneer and an inner section of gold coloured metal. The centre is enclosed with a convex piece of glass. The black and white photograph is an upper body portrait of an elderly woman wearing black clothing and a black bonnet with loose ties. The back is sealed with brown paper with two adhesive cushion pads on the lower edge.harvey, view street, fruiterer

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. This donation includes the signature of Miss B Yoxon, who was a student that transcribed braille around the 1920's for the Victorian Association of Braille Writers, and the owner of this board and textbook. Some originals of her work and a translated letter from her friend James Grubb accompany the frame. 1 wooden board and Braille paper, with 1 Braille text bookbraille equipment, victorian association of braille writers

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. Sometimes the board was labelled with organisational labels. In this example, the Rules of Membership for the Victorian Association of Braille Writers was attached, which included the costs of being a transcribing member and the length of the loan period. It is signed by Millicent Ritchie (Hon. Secretary) and Minnie H Crabb (Asst Sec and Librarian) at the base of the sheet.Brown rectangular wooden board with hinged paper clamp and metal hinged guideFree Lending Library for the Blind label is attached to boardbraille equipment, victorian association of braille writers