NEW BENDIGO GOLD PROJECT - a Comparative STUDY of historical and modern Mine Ventilation on the Bendigo Goldfield -dated October 2001 by Rowland L. Hill. Comparison of the air quality standards set in the 19 and 21 centuries . Paper presented by Rowland Hill, Bendigo Mining, at the BHS meeting Friday 2nd November, 2001.Rowland L. Hillgold mines

The story of the attempt to establish the Rosstown industrial and residential complex in the Caulfield district, south-east of Melbourne, during the second half of the nineteenth century. The focus of the scheme was a major beet processing mill, the Rosstown Sugar Works. It also looks at the railways lines which serviced the sugar beet ventures in the Caulfield/Rosstown area.victorian history, local history, town planning, william murray ross, rosstown estate, rosstown railway

"METHODIST CHURCH. In 1881, during the ministry of Rev. W. H. Fitchett, B.A., at Hawthorn, a number of members of the denomination living at Kew considered that the time was opportune for founding a local Church. The Superintendent of the Circuit, the Rev. W. A. Quick of Richmond, met the members and formed them into a society class under the leadership of Mr. A. Brown and a Church was formally instituted at the house of Mr. T. J. Eaton, of Eglinton Street, in December, 1881. Services were regularly held for some time at the same place, and funds for purchasing a block of land were gradually collected, resulting in the present site in Highbury Grove being purchased for £350. Messrs. W. Cleverdon, A. Money, T. E. Serpell, and T. Vasey, of Hawthorn, and Messrs. A. Brown, R. Eyre, and T. J. Eaton of Kew, were appointed trustees. A public meeting was held a the Town Hall, when over £100 was raised. The Rev. John Harcourt, who had just been placed on the supernumerary list, was persuaded to undertake the charge, and commenced services in the Town Hall on 29th April, 1882, which were continued for eighteen months. A Sunday School was started, and altogether the effort progressed so satisfactorily that in October, 1882, the foundation and memorial stones of the present Church were laid by Mr James Huddart. At the tea meeting held in connection with this event nearly £200 was raised and a few months later £250 more was obtained by means of a bazaar. The contract for building Church was let for £1,200. The Sunday School celebrated its first anniversary in June, and the Church was opened on 7th October 1883, the preachers on the occasion being Revs. E. J. Watkin, S. Chapman, and John Harcourt, the collections amounting to £230. Towards raising these sums of money the ladies of the congregation helped very materially. In 1886 the foundation stone of a Sunday school, to cost about £900, was laid by Mrs. H Berry, the building being opened in April 1887. During the same year the Church was enlarged. In 1889 parsonage was erected, and again arrangements had to be made for a further enlargement of the Church, at a cost of nearly £2,000. The foundation stones of the tower were laid by Rev J. Harcourt, and of the transepts by Mrs. Job Smith and Mrs. John Watson. These additions were made during the ministry of Rev. P. R. C. Ussher, the first minister appointed to Kew by conference. He has been succeeded by Revs. Henry Howard, J. de Q. Robin, J. J. Brown, J. G. Wheen, A. E. Albiston, M.A., and F. J. Nance, M.A., who is at present ably filling the pulpit. For the musical portion of the services, the Church has been greatly indebted to the enthusiasm of Mr. C. Gardner, the leader of the choir, and Mr. C. E. Gardner, the organist. The Sunday School has had a number of excellent workers, among whom may be mentioned Messrs. Burchett, Allum, Hillard, Tonkin, Dent, Avery, McDonald, Green, and B. Hoadley, who have acted as Superintendents, and Messrs. Arnall and McCaghern as Secretaries. The present trustees are Messrs. H. Berry, Job Smith, A. Hoadley, F. Vial, C. Powers, H. L. Carnegie, C. H. Green, W. R. Rylah, E. M. Tonkin, S. Gaylard, J. Gregory, J. R. McDonald, T. J. Eaton, F. S. Fitchett, and S. Lamble; Society Stewards, T. J. Eaton and B. Hoadley; Poor Stewards, G. Hinchliffe and G. Fraser; Church Stewards, C. H. Green and G. Hinchliffe; Treasurer, F. S. Fitchett; Secretary, S. Lamble." Source: FGA Barnard, Jubilee History of Kew, Victoria, 1910Commemorative tributes were regularly produced in the 19th and early 20th Century to honour community service. Most were adapted from traditional lithographed models. This example, while created within a formal lithographed border has been transmuted into the equivalent of an illuminated document, hand-painted, and therefore rare. The use of flowers in the design emphasises the sentimental and spiritual aspects of the certificate. The document is a rare unique record of the Kew Methodist Church's history.A hand written testimonial for John Watson Esq from the Trustees of the Kew Methodist Church. The customised colour lithograph includes, at lower left, a turn of the century photograph of the Kew Methodist Church in Highbury Grove. The entire certificate is surrounded by floral art and scroll work. The central text uses neo-gothic lettering.‘Dear Sir … in view of your compulsory retirement on health grounds, from the position of Church Steward, [the Trustees] desire to express their great appreciation of your long service of over 22 years, in that and other offices in the Church. They trust that you will yet be spared many years in fellowship with our Church, and that God’s richest blessing be on you, and your family. We remain, Yours sincerely A. E. Albiston (Minister), S. Lamble (Secretary), F. S. Fitchett (Treasurer), T. J. Eaton (Trustee), C. H. Green and Hubert S. Howell (Church Stewards); March 28th 1907’. john watson esq, kew methodist church, highbury grove, certificates, tesimonials

Used by Wandin Sebire for an unknown purpose.An unusual split headed long thin spade with a wooden handle Four rivets attach the head to the handle. At the top the handle is screwed to the metal. It was used by Wandin Sebire, probably for a special purpose - it is not known for what. Spades are usually used for turning soil by pushing against the blade with the foot. Used in the early 20th century.Stamped on the metal handle - '2' and 'S & C Ham'. 'Parkes & Co. Birmingham no. 2'.gardening spades, spades, shovels, gardening tools

No specific information is available on this item. Household items made of ivory were common in the early 20th century and were often brought back to Australia from people returning from an overseas trip. Many of these types of items came from Asia. Letter openers are still is use today.This item is of interest as an example of the use of ivory in household items early in the 20th century. This use of ivory is in the main illegal today.This is a letter opener made of ivory. It has a plain blade with a rounded highly decorated handle. The decoration consists mainly of punched holes in geometrical patterns. The top has a hole for hanging up the item. There is a small split in the ivory in the middle of the handle. letter opener, warrnambool

The maker of this cruet set is unknown. It is a high quality household item and would have been a common item in households of the more affluent homes in the 19th and early 20th centuries. Cruet sets are not used much these days but have usually been replaced by salt and pepper shakers without a stand. This cruet set has no known local provenance but is retained as an example of a household item of the past. It will be useful for display This cruet set consists of a stand, a container for mustard and two containers for salt and pepper. The stand is silver-plated and has a rectangular base with pointed edges and three slots for the containers, one rectangular and the other two square in shape. The handle is riveted to the base with two screws which are now rusty. The base of the stand also has six studs. The silver plating is tarnished in places. The salt and pepper containers are made of cut glass in rectangular shapes and have silver-plated circular-shaped lids. The top of one of the lids has broken loose from the lid. The mustard container is made of cut glass and is rectangular in shape. The silver plating on the lids is wearing away. history of warrnambool, 19th century household items, cruet set

Hair clips such as this one would have been worn by women in the 19th and early 20th centuries and would have been used to keep back long hair from around the face. Similar clips may be used today but they would more likely be made of plastic or ornamented metal. This hair clip has no known provenance but is an attractive item and is retained for display purposes.This is a curved shell (perhaps tortoise shell) hair clip with an ornamental fretwork pattern in the centre. A metal piece, slightly curved, is attached to the clip with a screw. vintage hair clips, history of warrnambool

This item is an early type of cooker and would have been used to cook meat and puddings in the first two or three decades of the 20th century. It has no known local provenance but may have been a display item from the old Warrnambool Museum which was established in 1883 and was dismantled in the 1960s. This item, although incomplete, is of interest as a cooking bowl from the past and is retained for display purposes. This is a circular-shaped white china bowl. The base has a hollow tube protruding up through the centre of the bowl. There is printing on the outside of the bowl and on the top inside section. The lid of the bowl is missing. The ‘Quick Cooker’ Patent No 12161/11 Gold Medal London 1911 Excellent for stews of all kind Meat can be kept hot for hours without over-cooking or getting dry Grimwade’s Patent Nos 12835/09, 15043/09 Do not fill above this line – The pudding then has room to expand Water in saucepan should also be about this level ----- vintage culinary items, history of warrnambool, quick cooker

This handmade, aqua glass ink bottle's design is sometimes called a ‘boat’ shape. The base was mouth-blown into a rectangular mould, evidenced by the lack of seams, the pontil, crease lies and the uneven thickness of the glass. The shoulder section was mouth-blown into a two-piece mould and then cut off from the blowpipe. The lip is sometimes referred to as a 'burst-lip, which was often filed to be smooth. This method of making bottles was often used in the mid-to-late 19th century. The bottle would then be filled with ink and sealed with a cork. More expensive bottles would have a lip added, which was more time-consuming and costly. The capacity for a bottle such as this was about 3 ½ oz (ounces) equal to about 100 ml. Pens are a common item for that period. Pen and ink have been used for handwriting since about the seventh century. A quill pen made from a bird’s feather was used until the mid-19th century. In the 1850s a steel point nib for the dip pen was invented and could be manufactured on machines in large quantities. The nis only held a small amount of ink so users had to frequently dip the nib into an ink well for more ink. Handwriting left wet ink on the paper, so the blotting paper was carefully used to absorb the excess ink and prevent smudging. Ink could be purchased as a ready-to-use liquid or in powdered form, which needed to be mixed with water. In the 1880s a successful, portable fountain pen gave smooth-flowing ink and was easy to use. In the mid-20th century, the modern ballpoint pen was readily available and inexpensive, so the fountain pen lost its popularity. However, artisans continue to use nib pens to create beautiful calligraphy.The ink bottle is of interest, being made of aqua glass rather than the more common clear glass. This set of ink bottles and pens is significant because of the bottle's method of manufacture, which is representative of a 19th-century handcraft industry that has now been largely replaced by mass production. The bottle and pens are historically significant as tools used for handwritten communication until the mid-20th century when fountain pens and modern ballpoint pens became popular and convenient and mechanical typewriters became part of standard office equipment.Victorian 'Boat' ink bottle, small rectangular, aqua glass ink bottle with grooves along the long sides for pen rests. The base has a pontil, no seams, and the glass is uneven in thickness. The shoulder has two side seams and there is a ridge where it is joined onto the base; there are round indents on each of the shoulder, on the short sides, four in all. The mouth has rough edges. The neck leans to one side. The glass has impurities, crease lines and bubbles. There is dried ink in the bottle. Two pens with metal nibs are included with the ink bottle. flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, ink, nib pen, writing ink, writing, copying, banks, lawyers, commerce, student, permanent ink, stationery, record keeping, handwriting, writing equipment, writing accessory, office supply, cottage bottle, boat bottle, mouth-blown bottle, two-part mould, sheer-lip bottle, burst-lip, cork seal, copy ink, aqua glass

A scotch eye auger is perfect for quickly making holes in dry or wet wood for making chairs, stools, and any number of woodworking projects. The scotch eye serves as a peg gauge and whatever peg you make to go into the hole should fit into the augers eye. Robert Sorby & Sons: The forbearer's of Robert Sorby had been cutlers in the Sheffield region of England, dating from the mid 17th century. Robert Sorby and Sons were registered in Sheffield in 1828 as a manufacturer of edge tools, saws, scythes and hay knives. In addition to manufacturing tools, they also diversified into the manufacture of crucible steel for tool manufacture. From circa 1860-1967, the Sorby factory in Sheffield was known as the “Kangaroo Works”. The Kangaroo Brand of tools was made by Robert Sorby & Sons. During the 19th century, they had a large trade in Australasia. By the early 20th century, they were manufacturing carving tools, planes and plane irons, circular saws, wood saws, butchers saws and cleavers, garden tools, pruning knives, coopers’ knives, bricklayers tools and joiners tools. In 1923 Robert Sorby & Sons was bought by Sheffield company Hattersley and Davidson. They are today one of the few remaining British tool manufacturers.The company has a long tradition of making edged tools for various uses and exporting them to Australia, however the subject item was probably made from the early 20th century up until 1967 when the company stopped exporting to Australia.Scotch Eye Auger, Double Twist with Lead Screw, square shaft, socket set at right angleRob Sorbey Sheffield stamped on shaft with Kangaroo trade markflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ring auger, carpenders tools, hole drilling, rob sorby & sons

This chisel belonged to Ernest Brighton Phillips, a Warrnambool furniture maker. Ernest Phillips (1875-1924) was born in Warrnambool and was apprenticed as a cabinet maker at the Warrnambool Box Works. In the 1890s he established a furniture store at the corner of Liebig and Koroit Streets and by the 20th century he had the largest furniture warehouse and factory in Victoria outside Melbourne. His products were sold all over Australia. Ernest Phillips and his family lived at ‘Heatherlie’ in Koroit Street. Today this property is the site of the residential complex for senior citizens known as ‘Heatherlie’. This chisel is of interest as it belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th century and the beginning of the 20th century. The item is also of interest as it is a good example of a woodworking tool that was used 100 years ago. This is a chisel with a wooden handle and a metal blade flattened at the end and attached to the handle by a brass ring. The blade is rusty and the handle has some of the wood gouged out at the top end. The handle has splotches of paint on it. The name of the owner, E. Phillips, is stamped into the wood. ‘E. Phillips’ernest phillips, history of warrnambool, warrnambool

This tool belonged to Ernest Brighton Phillips, a Warrnambool furniture maker. Ernest Phillips (1875-1924) was born in Warrnambool and learnt his carpentry trade at the Warrnambool Box Works. In the late 1890s Phillips established a furniture store at the corner of Liebig and Koroit streets and by the early 20th century he had the largest furniture warehouse and factory in Victoria outside of Melbourne. His products were sold all over Australia. Phillips and his family lived at ‘Heatherlie’ in Koroit Street. Today this property is the site of the residential complex for senior citizens known as ‘Heatherlie’. This tool is of considerable interest as it belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th century and the beginning of the 20th century. It is also of interest as a good example of a tool that was in use 100 years ago. This is a small tool with a wooden handle. The top part of the handle that screws in is missing. The tool is attached to the handle by a brass ring and a screw and the tool itself is a thin nail-like piece of metal with a small metal piece at the end in the shape of a star with six points. This end piece gouges out a hole or a pattern in wood or other hard material. The tool belonged to Ernest Phillips and his name is stamped on the handle. Three oblong-shaped metal nails were also with this tool but were not necessarily used with it. ‘E. Phillips’ernest phillips, history of warrnambool

No information is available on this item but heel protectors were commonly used by householders in the early to mid 20th century to protect shoes from scuffing and damage caused by the wear and tear of frequent use. The protectors were usually put on the boots or shoes by a member of the family. They were commonly used until the 1950s. This item is of some interest as an example of the custom in the early 20th century of using heel protectors on boots and shoes. It is a useful display item. This is a metal object in the shape of a shoe heel (semi-spherical). It has five holes to put in screws to attach to the heel of a shoe or boot. It is silver in colour and has grooves across the surface to prevent slipping. heel protector, shoe

This item is a boot remover used by mounted military personnel, probably by a member of the Mounted Rifles or Light Horsemen units early in the 20th century. Similar boot removers, also known as boot jacks or boot pulls, were used by anyone wearing riding boots and would be still in use today. This item is of some interest as it shows the type of boot remover used by military mounted soldiers and other horsemen in days past. This is a wooden object with a top with two side handles. Attached to the top are two sticks or poles which are splayed at the end. Attached to the ends of the poles by screws is a piece of wood with an oval or spoon shape cut out at the end. The wood is worn at some of the ends. men’s accessories

This saw was made by H. Disston and Sons, a Philadelphia, U.S.A. company founded in 1850 by Henry Disston. It became the largest saw maker in the world in the 20th century. This saw could have been used for industrial or for household purposes. The hand saw used today features the same basic pattern as this one. This saw has no known local provenance but is retained as an example of a hand saw that is over 100 years old. This saw has a triangular-shaped metal blade with a serrated edge on the straight side. The blade has details of the manufacturer imprinted into the metal but this is mostly indecipherable. The wooden handle has four wooden screws and a fern pattern etched into one side. It also has a metal plaque with the name and emblem of the maker. The saw has some staining.‘H. Disston & Sons Philada’household tools, history of warrnambool, wood saw

No specific information is available for this item. However, ivory was common in early 20th century household items, which were often purchased overseas as souvenirs. Many ivory items originated from Asia. Letter openers are still used today; however, they are now made out of steel as ivory is illegal.This item is an example of the use of ivory in domestic households early in the 20th century. A long, cream-white letter opener made out of ivory with a plain blade and rounded handle.There is decorative patterning on the handle consisting of holes and circles.ivory, letter opener, letters, chiltern athenaeum museum, mail

This rare vintage clothes iron is not just a functional item but a testament to the craftsmanship and ingenuity of an earlier era of the 19th century. Crafted from cast iron and featuring a wooden handle, it is a unique piece that adds a touch of authenticity and history to our collection. The inclusion of a funnel and chimney showcases the attention to detail in the design. A rare cast iron charcoal clothes iron with a wooden handle, complete with a funnel and chimney. The goose neck iron has a hollow base into which charcoal is placed. The small hole at the back has a sliding cover that was used to regulate the draft and temperature of the iron. To keep the charcoal glowing, the cover could be opened to allow more air or oxygen in to encourage the charcoal to burn. The iron could be swung back-and-forward to revive the charcoal. The fumes produced by the charcoal are carried away from the clothes by the large funnel that acts like a chimney at the front of the iron. The holes that line the base allow air to circulate and keep the charcoal ambers burning. This vintage clothes iron is not just a functional item but a testament to the craftsmanship and ingenuity of an earlier era. 'S' is stamped in a circle on the back of the iron.flatirons, laundry irons, cast iron laundry irons

Red covered pattern book of needlework designs from Briggs of Manchester. Over 130 pages with inserts and advertising specific products in the Briggs range.non-fictionneedlework, tatting, embroidery, transfers, art nouveau

This ledger contains an Index to Drafts for Mortgages, Conveyances and Deed of Covenants etc (1896 to 1913) which was in use by the Warrnambool solicitor, Ernest Chambers. He had offices in Warrnambool, Koroit and Port Fairy in the late 19th century and early 20th century and Thomas Goodall was his manager in Warrnambool until 1899 when Chambers took up permanent residence in Warrnambool. The ledger was found in the old Mackay Taylor offices in Kepler Street and presumably came into the possession of this law firm at a later stage when Ernest Chambers was no longer operating in Warrnambool. The firm of Mackay Taylor was originally established in 1898 from the amalgamation of the law firms of George Mackay and James Fletcher. In the 1920s the firm became Mackay and Taylor when J. Taylor joined as a partner and this business was prominent in Warrnambool until the 1990s.This ledger has some significance as it contains the names of many Warrnambool and district residents of the late 19th and early 20th centuries and gives some indication of what type of legal transaction they were involved with. It therefore has some historical and social connotations useful for researchersThis is a ledger with a black cover and red bindings on the spine and corner reinforcements. There are 273 pages with printed red lines for accounting purposes. The entries are written in black ink. The inside front and back covers of card paper material have a red and blue mottled pattern. Front cover: ‘Index to Drafts, E.T.H.Chambers’ Spine: ‘8-4-96 to 14-9-15 Index to Drafts’ ernest chambers, solicitor mackay taylor legal firm

This window was originally above the door at 29 Murphy Street, a butcher shop run by Jas. Ferguson and Company and later bought by Bob Hoysted who had worked for Jas Ferguson as an apprentice. The window sits in a painted wood frame and illustrates a pastoral scene with a cow, two grazing sheep and a path leading to an open gate. Butcher shops typically illustrated their business with illustrations of the animals they sold. The painted glass pieces are held together by lead. Some of the pieces are textured. The artist is unknown. It is possible that the window was imported from Europe since decorative glass works in Australia at the end of the 19th century were rare, if not non-existent. Decorating store fronts with windows such as this one was popular in Melbourne at the end of the 19th century.

This pencil was found in 1946 by Mr Jim Pelling when an old wall was being pulled down in Warrnambool. This type of pen would have been used in the 19th century and apparently produced good legible writing and the lead point never wore out. No information is available on Jim Pelling or the location of the wall.Although this pencil has no known provenance it is of considerable interest because of its finding in an old wall in Warrnambool and because of its antiquarian value. It is a good example of a writing tool of the past and the ivory handle is of particular interest. This is a pencil with a handle made of ivory with a sharpened point of metallic lead screwed on the end of it. The end of the handle has an ornamental column shape. The lead at the end is slightly bent. Accompanying the pencil is an extract from a 1946 Warrnambool Standard detailing the finding of the pencil and some handwriting from a later date. The newspaper extract is pasted on to a piece of cardboard (a piece of a Rice Bubbles packet).In blue handwriting: ‘Extract from 1946 Warrnambool Standard’ and ‘Given to Warrnambool Historical Society by Mr J. Pelling 1970’jim pelling, metallic lead pencil, warrnambool history

There is no specific information available on this watch and case. The watch was made by the American Watch Company which operated from 1850 to 1957. Small cases were often used to carry a watch in the 19th and early 20th century while a person was travelling, although wooden ones do not seem to have been common. The owner of watch, ‘A.U.’ has not been identified. Until the provenance of this item is established it remains an interesting object from the past and one suitable for display. This is a wooden case embossed on the front with a flower motif. It has a hinged lid with a space hollowed out inside to hold a pocket watch. This area has been lined with felt. The case contains an American silver watch which has a highly decorated cover. The watch face has Roman numerals with a smaller seconds dial. There is a winding mechanism and a ring at the top of the watch for attachment to a chain.On silver watch case: ‘A.U.’ On watch face: A. W. Co., Waltham, Mass. travelling case and watch, american watch company, warrnambool

Walking sticks with carved snakes such as this one were very popular household items in the late 19th and early 20th centuries and were often given as presents to older men. They were novelty pieces of carving requiring considerable skill and patience and walking sticks were usually hand-made in those days. This walking stick has no known local provenance but it is a fine example of a hand-made household item of 100 to 150 years ago This is a piece of brown wood with the shaft of the stick carved to a smooth round shape tapering down towards the end and with a snake shape carved over the shaft from the same piece of wood. The head of the snake juts out from the shaft top and the snake has scaly patterns worked on its surface. The stick has a larger round knob at the top and a metal covering at the bottom. When the stick is held upright and twirled around it gives the impression of a snake coiling and moving up the stick. household items, walking sticks

Webb, Mc Donald and Co., Engineers, Brassfounders, Sheet Metal Workers, Plumbers appear to be the forerunners of the firm of Webb Brothers and Co. which was as important business in Lava Street, Warrnambool in the early 20th century. The Webb Brothers were especially noted for their windmill making, establishing a business in South Melbourne in 1921.This luggage label is of some significance as it is the only item we have of the firm of Webb, McDonald and Co.Buff coloured rectangular label with dark blue text . Two corners of the label are mitred. It has a punched hole with a reinforce sticker .There is a pink smear on the front . There are remnants of pink card on the reverseFROM WEBB, MCDONALD 7 CO., Engineers, Brassfounders, Sheet Metal Workers, Plumbers &c. LAVA STREET, WARRNAMBOOL.webb, mc donald, engineers, brassfounders, plumbers, wiindmills

This deck cannon is believed to be a replica Carronade as it has no foundry mark, year of manufacture, proof marks or weight of carronade on it. However, its design matches the design of Carronades used in the early to mid 19th century. History: The carronade was designed as a short-range naval weapon with a low muzzle velocity for merchant ships, but it also found a niche role on warships. It was produced by the Carron iron works and was at first sold as a complete system with the gun, mounting, and shot altogether. Carronades initially became popular on British merchant ships during the American Revolutionary War. A lightweight gun that needed only a small gun crew and was devastating at short range was well suited to defending merchant ships against French and American privateers.   Its invention is variously attributed to Lieutenant General Robert Melville in 1759, or to Charles Gascoigne, manager of the Carron Company from 1769 to 1779. In its early years, the weapon was sometimes called a "mellvinade" or a "gasconade". The carronade can be seen as the culmination of a development of naval guns reducing the barrel length and thereby the gunpowder charge. The Carron Company was already selling a "new light-constructed" gun, two-thirds of the weight of the standard naval gun and charged with one-sixth of the weight of the ball in powder before it introduced the carronade, which further halved the gunpowder charge. The theory of its design was to use less powder and had other advantages that were advertised in the company's sales pamphlet of the time, state. The smaller gunpowder charge reduced the barrel heating in action, also reduced the recoil. The mounting, attached to the side of the ship on a pivot, took the recoil on a slider, without altering the alignment of the gun. The pamphlet advocated the use of woolen cartridges, which eliminated the need for wadding and worming, although they were more expensive. Carronades also simplified gunnery for comparatively untrained merchant seamen in both aiming and reloading that was part of the rationale for adopting the gun. Other advantages promoted by the company were. The replacement of trunnions by a bolt underneath, to connect the gun to the mounting, reduced the width of the carriage that enhanced the wide angle of fire. A merchant ship would almost always be running away from an enemy, so a wide-angle of fire was much more important than on a warship. A carronade weighed a quarter as much as a standard cannon and used a quarter to a third of the gunpowder charge. This reduced charge allowed Carronades to have a shorter length and much lighter weight than long guns. Increasing the size of the bore and ball reduces the required length of the barrel. The force acting on the ball is proportional to the square of the diameter, while the mass of the ball rises by the cube, so acceleration is slower; thus, the barrel can be shorter and therefore lighter. Long guns were also much heavier than Carronades because they were over-specified to be capable of being double-shotted,(to load cannons with twice the shot, for increased damage at the expense of range). Whereas it was dangerous to do this in a carronade. A ship could carry more carronades, or carronades of a larger caliber, than long guns, and carronades could be mounted on the upper decks, where heavy long guns could cause the ship to be top-heavy and unstable. Carronades also required a smaller gun crew, which was very important for merchant ships, and they were faster to reload. Additional notes: Cannon cast in England, Wales and Scotland had their imperial weight chiselled or engraved in the format of 4-2-0 on the bottom of the cascabel, indicating the weight of the cannon as 4 hundredweight, 2 quarters and 0 pounds. Since a hundredweight equals 112 pounds and a quarter weight is 28 pounds the total weight is 504 pounds or about 228 kilograms. The small bore replica carronade and carriage is part of a collection of nineteenth Century Flagstaff Hill Guns and cannons, and is a representation of carronades used from the early 18th up to the 1850s on merchant and military ships particularly the British Royal Navy until 1850. This example is not significant in the historic sense but demonstrates the type of artillery used aboard vessels of the time for protection & offensive military actions. Cannon, cast iron, small smooth bore cannon on the stepped wooden carriage with wooden wheels. It appears to fire a 12-pound cannonball. The Cannon barrel can have its elevation adjusted via a sliding sloped block at the rear of the cannon. Gun carriage has loops for locating and holding the carriage in position with the use of ropes. It is believed this carronade is a replica of a mid-to-late 19th-century Carronade cannon.Cast into metal; [Royal emblem of Queen Victoria (VR "Victoria Regina")]warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cannon, naval cannon, cannon on carriage, 19th century cannon, fortifications, smooth bore cannon, 12 pounder, carronade, artillery, replica, deck cannon, cannon in carriage, ship cannon

Probus Club of Ringwood Inc - The Third Decade 2003-2013 into the twenty-first century. Includes notes by Richard Carter, President of Ringwood Historical Society, who gave the keynote talk at the book launch on 21st October 2013. Also address by Bob Gallacher, past-president of the Probus Club of Ringwood and Club historian.

Three maps: copies from the 19th century. 1. Handwritten 'Dept of Lands & Survey 1876'. 2. Map of the Ovens & Murray District, Victoria with handwritten 'F.H. Hiscock & Co's, New Victoria Countries Atlas 1874'. 3. Map of the Murray and Gipps Land Distr' with handwritten: "Baillieu's County Atlas of Victoria 1866'.maps of victoria, 19th century, oven and murray district of victoria