Showing 9269 items
matching manuals
-
National Wool Museum
Clothing - Men's Tie, c.1980s
Part of a collection of books, manuals, photographs, letters and clothing relating to the working life of Stuart Ascough. Stuart's career in the wool industry spanned over 43 years from 1960 to 2003 in various roles including Topmaking Plant Manager at Courtaulds Ltd. in Spennymore, U.K., Operations Manager at Port Phillip Mills in Williamstown Victoria, Marketing Executive, Early Stage Wool Processing at the International Wool Secretariat Melbourne, Australia and General Manager of Victoria Wool Processors Pty. Ltd. in Laverton North, Victoria. Throughout his career Stuart travelled extensively, and in the 1990s worked at many topmaking mills in China on quality improvement projects. He also provided technical advice and training at mills in India, Ukraine, Lithuania, Kyrgyzstan, Russia, Latvia, Byelorussia and other parts of Europe and Asia.Dark green neck tie with ram and woolmark logo repeated.stuart ascough, international wool secretariat, victoria wool processors, port phillip mills pty ltd, topmaking, career, wool industry, training, technical advice, mills, clothing -
National Wool Museum
Clothing - Men's Tie, Australian Wool Corporation, c.1980s
Part of a collection of books, manuals, photographs, letters and clothing relating to the working life of Stuart Ascough. Stuart's career in the wool industry spanned over 43 years from 1960 to 2003 in various roles including Topmaking Plant Manager at Courtaulds Ltd. in Spennymore, U.K., Operations Manager at Port Phillip Mills in Williamstown Victoria, Marketing Executive, Early Stage Wool Processing at the International Wool Secretariat Melbourne, Australia and General Manager of Victoria Wool Processors Pty. Ltd. in Laverton North, Victoria. Throughout his career Stuart travelled extensively, and in the 1990s worked at many topmaking mills in China on quality improvement projects. He also provided technical advice and training at mills in India, Ukraine, Lithuania, Kyrgyzstan, Russia, Latvia, Byelorussia and other parts of Europe and Asia.Navy blue neck tie with golden rams and white stripe pattern repeated.front: AWC back; [label] WOVEN & MANUFACTURED / IN AUSTRALIA BY / "Tee-Dee" / EXCLUSIVELY FOR THE / AUSTRALIAN / WOOL CORPORATION back: AUSTRALIAN / WOOL / CORPORATIONstuart ascough, international wool secretariat, victoria wool processors, port phillip mills pty ltd, topmaking, career, wool industry, training, technical advice, mills, clothing -
National Wool Museum
Map - World Wool Map, Rabobank International, c.2002
Part of a collection of books, manuals, photographs, letters and clothing relating to the working life of Stuart Ascough. Stuart's career in the wool industry spanned over 43 years from 1960 to 2003 in various roles including Topmaking Plant Manager at Courtaulds Ltd. in Spennymore, U.K., Operations Manager at Port Phillip Mills in Williamstown Victoria, Marketing Executive, Early Stage Wool Processing at the International Wool Secretariat Melbourne, Australia and General Manager of Victoria Wool Processors Pty. Ltd. in Laverton North, Victoria. Throughout his career Stuart travelled extensively, and in the 1990s worked at many topmaking mills in China on quality improvement projects. He also provided technical advice and training at mills in India, Ukraine, Lithuania, Kyrgyzstan, Russia, Latvia, Byelorussia and other parts of Europe and Asia.Folded world map showing statistics, images and graphics relating to wool in the 1990's.front: World Wool Map / Rabobank / International / Rabobank International / Food & Agricultural Research / Croeselaan 18 / 3521 CB Utrecht / The Netherlands / Telephone +31 (0) 30 2161178 / Fax +31 (0) 30 2161920 / E-mail: [email protected] / Web-site:www.rabobank.com/far / Map produced by G-O graphics / Wijk bij Duurstede, The Netherlands / www.g-o-graphics.nlstuart ascough, international wool secretariat, victoria wool processors, port phillip mills pty ltd, topmaking, career, wool industry, training, technical advice, mills, map -
National Wool Museum
Badge - Woolmark and Australian Olympics Badge, The Woolmark Company, 1987
Part of a collection of books, manuals, photographs, letters and clothing relating to the working life of Stuart Ascough. Stuart's career in the wool industry spanned over 43 years from 1960 to 2003 in various roles including Topmaking Plant Manager at Courtaulds Ltd. in Spennymore, U.K., Operations Manager at Port Phillip Mills in Williamstown Victoria, Marketing Executive, Early Stage Wool Processing at the International Wool Secretariat Melbourne, Australia and General Manager of Victoria Wool Processors Pty. Ltd. in Laverton North, Victoria. Throughout his career Stuart travelled extensively, and in the 1990s worked at many topmaking mills in China on quality improvement projects. He also provided technical advice and training at mills in India, Ukraine, Lithuania, Kyrgyzstan, Russia, Latvia, Byelorussia and other parts of Europe and Asia.Black pin badge with gold woolmark logo and gold Australian flag and Olympic rings.front: WOOLMARK back: ACC / 1987 / # 986482 / CASH'S-AMINSCO / MADE IN AUSTRALIAstuart ascough, international wool secretariat, victoria wool processors, port phillip mills pty ltd, topmaking, career, wool industry, training, technical advice, mills, badge -
National Wool Museum
Clothing - Men's Tie, The Woolmark Company, c.1980s
Part of a collection of books, manuals, photographs, letters and clothing relating to the working life of Stuart Ascough. Stuart's career in the wool industry spanned over 43 years from 1960 to 2003 in various roles including Topmaking Plant Manager at Courtaulds Ltd. in Spennymore, U.K., Operations Manager at Port Phillip Mills in Williamstown Victoria, Marketing Executive, Early Stage Wool Processing at the International Wool Secretariat Melbourne, Australia and General Manager of Victoria Wool Processors Pty. Ltd. in Laverton North, Victoria. Throughout his career Stuart travelled extensively, and in the 1990s worked at many topmaking mills in China on quality improvement projects. He also provided technical advice and training at mills in India, Ukraine, Lithuania, Kyrgyzstan, Russia, Latvia, Byelorussia and other parts of Europe and Asia.Mustard coloured neck tie with rams and woolmark logo repeated.back: [label] Wool Mark / since 1964stuart ascough, international wool secretariat, victoria wool processors, port phillip mills pty ltd, topmaking, career, wool industry, training, technical advice, mills, clothing -
National Wool Museum
Archive - The Australian Sheep Flock, c.1990s
Part of a collection of books, manuals, photographs, letters and clothing relating to the working life of Stuart Ascough. Stuart's career in the wool industry spanned over 43 years from 1960 to 2003 in various roles including Topmaking Plant Manager at Courtaulds Ltd. in Spennymore, U.K., Operations Manager at Port Phillip Mills in Williamstown Victoria, Marketing Executive, Early Stage Wool Processing at the International Wool Secretariat Melbourne, Australia and General Manager of Victoria Wool Processors Pty. Ltd. in Laverton North, Victoria. Throughout his career Stuart travelled extensively, and in the 1990s worked at many topmaking mills in China on quality improvement projects. He also provided technical advice and training at mills in India, Ukraine, Lithuania, Kyrgyzstan, Russia, Latvia, Byelorussia and other parts of Europe and Asia.One sided A4 sized leaflet showing different breeds of sheep used for the production of wool in Australia.front: THE AUSTRALIAN SHEEP FLOCKstuart ascough, international wool secretariat, victoria wool processors, port phillip mills pty ltd, topmaking, career, wool industry, mills, leaflet -
National Wool Museum
Archive - Wool Processing, c.1990s
Part of a collection of books, manuals, photographs, letters and clothing relating to the working life of Stuart Ascough. Stuart's career in the wool industry spanned over 43 years from 1960 to 2003 in various roles including Topmaking Plant Manager at Courtaulds Ltd. in Spennymore, U.K., Operations Manager at Port Phillip Mills in Williamstown Victoria, Marketing Executive, Early Stage Wool Processing at the International Wool Secretariat Melbourne, Australia and General Manager of Victoria Wool Processors Pty. Ltd. in Laverton North, Victoria. Throughout his career Stuart travelled extensively, and in the 1990s worked at many topmaking mills in China on quality improvement projects. He also provided technical advice and training at mills in India, Ukraine, Lithuania, Kyrgyzstan, Russia, Latvia, Byelorussia and other parts of Europe and Asia.One sided A4 sized leaflet showing images and text relating to the processing of wool from fibre into fabric.front: WOOL / PROCESSING / Two main systems are used to process wool from fibre into fabric.stuart ascough, international wool secretariat, victoria wool processors, port phillip mills pty ltd, topmaking, career, wool industry, mills, leaflet -
National Wool Museum
Archive - Wool in Australia, 1990s
Part of a collection of books, manuals, photographs, letters and clothing relating to the working life of Stuart Ascough. Stuart's career in the wool industry spanned over 43 years from 1960 to 2003 in various roles including Topmaking Plant Manager at Courtaulds Ltd. in Spennymore, U.K., Operations Manager at Port Phillip Mills in Williamstown Victoria, Marketing Executive, Early Stage Wool Processing at the International Wool Secretariat Melbourne, Australia and General Manager of Victoria Wool Processors Pty. Ltd. in Laverton North, Victoria. Throughout his career Stuart travelled extensively, and in the 1990s worked at many topmaking mills in China on quality improvement projects. He also provided technical advice and training at mills in India, Ukraine, Lithuania, Kyrgyzstan, Russia, Latvia, Byelorussia and other parts of Europe and Asia.Concertina A4 sized leaflet outlining the history of wool in Australia from 1788 to 1988 in four pages with colour graphics and black text.page 1: Wool in Australia / 1 7 8 8 - 1 8 3 8 / Within 50 years of settlement sheep had moved into / every colony, the annual wool clip was over two / million kg, and wool had become our main export page 2: Wool in Australia / 1 8 3 8 - 1 8 8 8 / The first 100 years saw Australia become the / world's leading producer of wool. Our economy's / strength depended on the wool clip. page 3: Wool in Australia / 1 8 8 8 - 1 9 3 8 / By the late 1930's, wool represented over 62% of / the total export value of primary products. Australia's / fine wool was in great demand worldwide. page 4: Wool in Australia / 1 9 3 8 - 1 9 8 8 / In the 50 years leading up to our Bicentenary, / many developments in the sheep and wool / industry have maintained Australia's place / as the leading producer of wool.stuart ascough, international wool secretariat, victoria wool processors, port phillip mills pty ltd, topmaking, career, wool industry, mills, leaflet -
National Wool Museum
Archive - About Wool, International Wool Secretariat, 1995
Part of a collection of books, manuals, photographs, letters and clothing relating to the working life of Stuart Ascough. Stuart's career in the wool industry spanned over 43 years from 1960 to 2003 in various roles including Topmaking Plant Manager at Courtaulds Ltd. in Spennymore, U.K., Operations Manager at Port Phillip Mills in Williamstown Victoria, Marketing Executive, Early Stage Wool Processing at the International Wool Secretariat Melbourne, Australia and General Manager of Victoria Wool Processors Pty. Ltd. in Laverton North, Victoria. Throughout his career Stuart travelled extensively, and in the 1990s worked at many topmaking mills in China on quality improvement projects. He also provided technical advice and training at mills in India, Ukraine, Lithuania, Kyrgyzstan, Russia, Latvia, Byelorussia and other parts of Europe and Asia.A series of ten A4 information leaflets with various titles on the theme of 'About Wool...'. Some leaflets are single sheets double sided, some are folded four sided leaflets. All have different colours and titles, including 'Australian Wool Industry Statistics', 'History of the Australian Wool Industry', 'Guide to Wool Textiles', 'Wool the Fibre', 'Trademarks of Wool', 'Wool and the Environment', 'The Australian Sheep Flock', 'Care of Wool', 'The Natural Properties of Wool' and 'The Processing of Raw Wool into Yarn'. Leaflets show illustrations, logos, images and text.8394.1: No.1 / AUSTRALIAN / WOOL INDUSTRY / STATISTICS 8394.2: No. 2 / HISTORY OF THE / AUSTRALIAN WOOL / INDUSTRY 8394.3: No. 3 / GUIDE TO WOOL TEXTILES 8394.4: No. 4 / WOOL THE FIBRE 8394.5: No. 5 / TRADEMARKS OF WOOL 8394.6: No. 6 / WOOL AND THE ENVIRONMENT 8394.7: No. 7 / THE / AUSTRALIAN SHEEP / FLOCK 8394.8: No. 8: / CARE OF WOOL 8394.9: No. 9 / THE NATURAL / PROPERTIES OF WOOL 8394.10: No. 10 / THE PROCESSING OF / RAW WOOL INTO YARNstuart ascough, international wool secretariat, victoria wool processors, port phillip mills pty ltd, topmaking, career, wool industry, mills, leaflet -
Uniting Church Archives - Synod of Victoria
Badge, Methodist Girls Comradeship Rays' Section, 1948 - 1966
The Rays' badge was adopted by General Grand Council in Melbourne in 1935 with the design being submitted by South Australia. It was not to be worn on the Rays' regalia. "The shape of the badge represented the love with which every child of God is encircled. The blue circle stood for loyalty, the ivy leaf for friendship as well as recognising the Rays as a section of the Methodist Girls' Comradeship, and the white background for purity of mind and heart. The gold lines represented the good deeds which go out from each young life as rays of light bring sunshine to others. This meaning was adopted at General Grand Council in Sydney in 1948. In 1966, General Grand Council in Sydney, decided to discontinue the use of the Rays' badge in favour of the one badge [B021] for the whole organisation, thus emphasising the unity of all sections." Leaders' Manual for Comradeship 1970.MGC061.1 and MGC061.2, MGC061.3 and MG061.4 - White, blue and gold round MGC Rays' enamel badge with a pin on the back. "R"methodist girls' comradship rays section, badges -
Ballarat Tramway Museum
Document - Instruction, State Electricity Commission of Victoria (SECV), "Forest City Signals", 20/01/1965 12:00:00 AM
Significant in being a detailed set of instructions for the Forest City signalling system that was operated by the tram's trolley pole. Details of the locations and crossing loops where used, primarily around the loop and through Bridge St. and how it operated. Prepared and printed by the SEC during 1965.Five page, foolscap duplicated document, stapled in two locations along the top edge, titled Forest City Signals, and dated 20-1-1965, giving details about the Forest City signalling system installed in Ballarat. Explains how the system operates, gives instructions, details of the system, location of the loops, trams following each other, power failure. Also gives details of how the Bridge St system operated and the switch at Grenville St. Gives instructions for running out of the depot. Note: The locations of the signals are not as detailed as in the Driver Training Manual - See Reg Item 3486 See also Reg Item 5373 for another similar copy and fully scanned copy.trams, tramways, signals, crossing loop, forest city signals, grenville st, wendouree parade -
Ballarat Tramway Museum
Document - Instruction Book, Melbourne and Metropolitan Tramways Board (MMTB), "Standard Procedure covering the Duties and Responsibilities of the Uniformed and Plain Clothes Traffic Officers", Dec. 1962
Instruction Book or Procedure Manual, 69 Foolscap page, Gestetner printed, contained within heavy card covers, top stapled (three staples), top sheet printed with title "Standard Procedure covering the Duties and Responsibilities of the Uniformed and Plain Clothes Traffic Officers". Compiled by the Melbourne and Metropolitan Tramways Board, first adopted 1957, revised December 1962. Has cover sheet signed by Traffic Manager, R. C. Drummond with six sections of procedures: 1. General 2. District Traffic Inspector's 3. Traffic Inspector's 4. Revenue Inspector's 5. Ticket Examiner - Depot Starters 6. Staff Signalmen (Batman Ave and Swanston/Victoria St.) On top of first sheet in black ink "Ballarat Tramway Preservation Society Catalogue No 314."trams, tramways, mmtb, instructions, rules, traffic control -
Ballarat Tramway Museum
Photograph - Illustration/s, Royal South Street Society, "Sturt St Ballarat", 1939
Has a strong association with the work of the Royal South Street Society, who published a handbook or manual for their competitions. Used a photograph published at about the same time.Printed sepia coloured photograph of Sturt St. in the mid 1940's looking from the top of a building in Grenville St. towards the West. Has a number of parked vehicles in kerbs, two people riding horses, a Vacuum Oil Co. truck in the bottom right hand corner and an SEC tram travelling west, just past the City Loop points. Colour postcard of same photograph see Reg Item 2981 and another print see Reg Item 675 Appeared in the 1939 Royal South St Society competition Manual. Appears to have been used as a piece of note paper. See also Reg item 675 for alternative source details.Handwritten note in very faint pencil on rear.trams, tramways, ballarat, sturt st., royal south street society -
Melbourne Tram Museum
Manual, Yarra Trams, "Glen Huntly Depot Renewal", "Kew Depot - Pit Deepening Roads 1 to 4", "Camberwell Depot Yard Tracks Renewal", 2007 to 2011
Set of three Reports or Operations Plan or Manual for work at Kew and Glen Huntly Depots. .1 - 12 A4 pages - stapled - "Kew Officers Information Manual - Glen Huntly Depot renewal" - Friday 11 May 2007 to Monday 21st May 2007". Has a photo of the depot on the front sheet. Covers service changes, arrangements for changes to services running from Kew Depot, car parking, tram requirements. Has a table of contents. .2 - 7 A4 pages - stapled - "Operations Plan - "Kew Depot - Pit Deepening Roads 1 to 4" = Monday 23 June 2008 to Friday 18 July 2008" - has a table of contents, covers maintenance, tram requirements, out stabling, security, sanding and hours of operation. .3 - 19 A4 pages - stapled - "Camberwell Depot Yard Tracks Renewal" - Saturday 3 December 2011 to Monday 12 December 2011 - has a table of contents, service changes, car parking, stabling, maintenance, operations, sanding, cleaning, rosters and test trams and notice to employees. .4 - 3 A4 foolscap sheets - Co-ordinating plan for Kew Depot / Barkers Road entrance and High Street and Cotham Road - dated 25/11/2005 - list works, location, overhead, cabling, track and other works and isolation requirements. On the rear has a list of the trams for the depot, Collins St, Simpson St and Camberwell. .5 - Notes on the Kew Depot relay by Hugh Waldron received in an email dated 9/3/2018 - from Kew Depot History..1 - Has "H. Waldron" in top left hand corner in blue ink. .2 - ditto "Hugh" in red ink.trams, tramways, yarra trams, kew depot, glenhuntly tram depot, trackwork, depot fan, tram services -
Federation University Historical Collection
Booklet, Harry Brown and Co, St Peter's Church, Ballarat, 1961
St Peter's Church was established in 1861 in the school house. In 1864 the question of building a church was seriously discussed. A foundation stone for the church was laid on 16 November 1864 by Bendan S. Hassell. The architect was Charles Davenport Cuthbert; the trustees were Somerville Learmonth, W.P. Whitcombe, Robert Wynne and J.B. McQuie. The church building committee consisted of Horace walker, J.S. Carver, John M. Fisher, Robert Williams, Thomas Gibson, John E. Hodgson and W. Lindisay Richardson. The foundation stone of the Soldier's Chapel was laid on 06 April 1917. The beautiful stained glass in the chapel was donated by Mrs W. Tunbridge and H.C. Curwen-Walker, in memory of their sons who were killed during World War One. In 1929 a new three manual organ by London's Hill, Norman and Beard was installed. It was the first in Ballarat with electro-pneumatic action.White soft covered booklet outlining the first 100 years of St Peter's Anglican Church, Ballarat. The book includes information on each of the ministers until 1961, a programme of the Centenary Celebrations, and black and white photographs of the exterior and interior of the church. Images include the Pittard Memorial Windows, the Crocker Memorial Windows and baptistry, and H.W.H. Adeney.st peter's anglican church ballarat, churches, religion, charles d. cuthbert -
Kiewa Valley Historical Society
Can Mortein Powder, late 1870s to early 1920s
The can(product) of powdered Mortein was used throughout Australia and especially in rural regions where environmental conditions of crops, cattle and other livestock resulted in greater amount of "invasions" from insects. The eradication of unwanted invaders into the homestead required either manual extermination or a relevant poison which in low doses would not affect humans. Fly squats were still a good measure of eradication of flying pests however those lurking in cupboards or "hard to get at" locations needed a method, such as the Mortein powder to do the deed. This product and especially this can was used at the fore front of pest eradication. Powders and pellets are still in use 100 years later and the core ingredient is still environmental friendly and meets health conscious modern Australians. The basic product has survived the passage of time and was invented by a German immigrant to Australia in the late 1800s.This can and what it represents to rural households and outhouses, is in some ways immeasurable to the peace, health and tranquility within the household of all the families within the Kiewa Valley. Although small in size the relief of those within the sanctity of the home from annoying pests is enormous. The relief not only physical but also mentally to those residents, from the sometimes grueling and painful rural existence in a "sunburnt" countryside cannot be truly expressed in words. Kiewa Valley residents are part of the sometimes harsh rural environment where the introduction of helpful products such as this powder are noticed and used more prolifically. Any product, especially invented within Australia, which allows for a easier existence is of a great significance.This small cylindrical can contains powder of crushed the chrysanthemum flowers(pyrethrum extract) and has two circles of small circular perforations in the lid (to allow contents to be sprinkled onto other surfaces). It is constructed of mild steel with both ends crimped onto the main cylinder. A paper information label has been adhered to the outside of the cylinder.Printed on the outside label is: 1st line "MORTEIN!" 2nd line "THE GREAT INSECT DESTROYER" underneath "(Registered)" and underneath "It is without doubt the best and most reliable Insect powder in the World" underneath this line "In order to use Mortein with profit it is best to get a Mortein spreader through", next line "which by pressure of the hand the powder is ejected and well diffused." An inflection mark appears over the e in "Mortein" as to signify that the word "mort" is french for (dead) and the "ein" is german for "one". The word "mortein" therefore is diffused and translated into "dead one". A thin line separates the above from the list of insects which the powdered contents will kill together with the suggested application targets. T the bottom of the instructions is printed the manufacturer "J. HAGEMANN PTY. LTD., MELBOURNE," Below is "Sole Proprietors"natural insecticide products, environmentally friendly products, household pest dispensers, australian inventions -
Vision Australia
Photograph - Image, RBS workers with Opticons
1. Male sits at a desk with a Wang computer terminal in front of him and Optacon device to his left. The Optacon was a device that allowed printed material to be turned into Braille through the use of a small camera connected to a vibrating array that produced the Braille. To his right is a cassette recorder, another computer and recorder, whilst a long cane rests against a wall. The man is possibly wearing a sonic guide and listening to the cassette whilst he types on to the screen. 2. Male sits in an office with an Opticon to his left, which he is using, and a manual typewriter in front of him. The typewriter has the camera of the Opticon clamped into position over the typewriter. Behind the man is a reception desk, with a bell and small switchboard visible on upper counter of the desk, and a coffee mug, portable cassette recorder, telephone books and piles of paper stacked neatly under the upper counter.Digital image taken from pictures on chipboard15 - Group with 13, 14 please - no caption available 12 - Group with 13, Optacon captionemployment, royal blind society of new south wales -
Flagstaff Hill Maritime Museum and Village
Tool - Cabinet Scraper, 1945-1955
A cabinet scraper (sometimes called a ‘card scraper’) is a woodworking tool used for shaping and finishing furniture. The name ‘cabinet’ is used because scrapers are versatile and important tools for cabinet makers to provide a smooth surface to a finished cabinet. The body and the cutting edges of most cabinet scrapers are formed from a single piece of material. The blades are created on each edge of the body. Also, a scraper can have adjustable blades and a wooden handle these are two-handled cabinet scrapers. Cabinet scrapers are used manually to scrape small amounts of material from the surface of the wood to smooth it, shape it, or remove an old finish such as varnish from its surface. They are commonly used on furniture and musical instruments such as guitars and violins. The tools can be used on hardwood or softwood but when using a cabinet scraper on any wood, you should generally work along the grain.A tool used to finish timber to give a smooth finish and a important tool for a cabinet maker that has been in use for many hundreds of years in different design formsBox scraper adjustable with long wooden handle.Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, box scraper, scraper, woodwork tool, cabinet scraper, furniture finishing -
Queenscliffe Maritime Museum
Instrument - Aneroid Barometer
An aneroid barometer is an instrument used for measuring air pressure as a method that does not involve liquid. Invented in 1844 by French scientist Lucien Vidi, the aneroid barometer uses a small, flexible metal box called an aneroid cell (capsule), which is made from an alloy of beryllium and copper. The evacuated capsule (or usually several capsules, stacked to add up their movements) is prevented from collapsing by a strong spring. Small changes in external air pressure cause the cell to expand or contract. This expansion and contraction drives mechanical levers such that the tiny movements of the capsule are amplified and displayed on the face of the aneroid barometer. Many models include a manually set needle which is used to mark the current measurement so a change can be seen. This type of barometer is common in homes and in recreational boats. It is also used in meteorology, mostly in barographs and as a pressure instrument in radiosondes.5 inch Aneroid barometer on wooden basebarometer, aneroid -
Queenscliffe Maritime Museum
Equipment - Hand operated divers air pump
Standard diving dress (also known as hard-hat or copper hat equipment, or heavy gear) is a type of diving suit that was formerly used for all relatively deep underwater work that required more than breath-hold duration, which included marine salvage, civil engineering, pearl shell diving and other commercial diving work, and similar naval diving applications. Standard diving dress has largely been superseded by lighter and more comfortable equipment. Standard diving dress consists of a diving helmet made from copper and brass or bronze, an air hose from a surface-supplied manually operated PUMP or low pressure breathing air compressor, a waterproofed canvas suit, a diving knife, and weights to counteract buoyancy, generally on the chest, back and shoes. Later models were equipped with a diver's telephone for voice communications with the surface.Hand operated divers air pump for one or two diversdiving, air pump -
Churchill Island Heritage Farm
Machine - Stump jump plough
Ploughing is a major part of soil conservation, and until 1945, it was mainly done with the aid of horses. The plough cuts into the soil with a coulter, and is followed by the share. The latter digs deeper and pushes up the soil which is then turned over by the mould board. This buries weeds, and exposes the soil to the elements whilst creating a furrow. The stump jump plough was initially invented and developed by two brothers, Richard Bowyer Smith and Clarence Herbert Smith, on the Yorke Peninsula in South Australia in the 1870s. A lot of the farming land in this country was cleared from natural bush through extremely hard manual work and burning. Often there would be residual stumps and roots in the soil which played havoc with long-standing traditional ploughing equipment. The stump jump plough was designed to lift over the obstruction and down again and continue ploughing the soil. It was hailed as a revolutionary change in the way Australian farmers ploughed their land.Unpainted metal stump jump plough with information signagefarm machinery, soil cultivation, stump jump plough, horse drawn -
Trafalgar Holden Museum
Vehicle - HD Holden Premier, 1965
The HD Holden was introduced by GMH in 1965 and for a variety of reasons was considered the ugly duckling. The HD replaced the large selling and very popular EH (1964) model. the dramatic change in design from the square slopped EH to the sharp edged shape of the HD was met with some buyer resistance and was highly criticised by the motor writing fraternity. The unusual front guard shape, which became known as kidney cutters, which assisted with the unpopular impression, resulted in lower sales. The vehicle had both the 149 and 179 cubic inch capacity red engines with either the hydromatic or 3 speed manual was a good vehicle. The HD model also introduced the X2/ which was the first attempt by GMH to produce a performance vehicle. Our HD also has the leather seats in the premier version and this was the last model to have dealership leather seats. This vehicle has 13.000 miles on the clock and is probably the most absolutely original and lowest mileage HD model in Australia, the vehicle in every aspect is "as new" and in fantastic condition of this model Holden which has significant motoring history.1965 Holden Premier sedan with 179 motorPremier on rear as well as a 179 badge. HOLDEN across bonnet Registered number 63456-Hvehicle, holden, 1965, car -
National Wool Museum
Functional object - Mending Table, c1930
Any faults in the final product can be repaired by mending. Prior to more advanced machinery, fabric was draped over a mending table and carefully inspected for faults. Quick eyes and nimble fingers were needed. Repairing faults was a highly skilled manual operation. Any knot or thickness had to be removed without affecting the quality of the fabric and mending had to be invisible. In the 1930s to make the day pass faster, popular records were played to the factory workers in the mending room. The top of the table is propped up to make it a well-lit surface over which bolts of fabric were unrolled to check for faults. Menders repaired them with invisible hand stitching. Each weaver stitched a coloured thread in the selvage to show the start of their shift, therefore if mistakes were found the company could easily find who was responsible. This table was used by Gail Morris in teh 1960s. Large wooden table with tilted top. mending table, wool processing, fabric, textile industry -
Whitehorse Historical Society Inc.
Equipment - Magneto Telephone, C1930
Used to communicate with the local telephone exchange and for connection to other subscribers. The introduction of automatic exchanges saw the their demise. This phone was used in the family home of the donor at Caboolture (aboriginal for carpet snake) during the 1940s and 1950s.A magneto telephone for communication with a manual telephone exchange. The handle on the right hand side, which was turned to rotate the magneto to call the exchange - ask operator for a number and then to be connected. Telephone enclosed in a specially designed box for mounting on the wall. There was a bell on top which rang when the magneto ringer at the exchange was turned. Fitted with a carbon microphone mounted on the front of the box for the transmission of the spoken word and an electro- magnet. A receiver which hangs on the left hand side on a hook. The hook acts as the on and off switch to answer the call and to switch on the battery to provide power for the receiver and energize the transmitter. There is an angled ledge for writing any messages. There is no battery. The circuit for the phone is on the inside of the door to the interior of the phone. pHone is type CDA116 - PMG Registered - Ericsson.communication, telephonic -
Ballarat Tramway Museum
Manual, Seashore Trolley Museum and Kennebunkport USA, "Seashore Museum Maintenance Manual - Electrical", c1970
Manual - 176 quarto pages + light grey covers Electrical" on a cover pages. with a red comb binding. Prepared by Donald G Curry of the Seashore Electric Railway, 17/6/1962. Document has table of contents: Covers Painting, Roof repairs, body repairs, inspections, Lubrication, Traction Motor Maintenance, controllers, hand operated circuit breaks, car resistors, traction braking equipment, trucks and rigging. Has an appendix and index. Document has been scanned. Part 1 - cover to page 17 2 - pages 18 to 40 3 - pages 41 to 66 4 - pages 67 to 100 5 - pages 101 to 132 6 - pages 132 to 159 7 - pages 160 to rear cover trams, tramways, manual, tramcar equipment, maintenance, motors, controllers, tramcars, tram bodies -
Flagstaff Hill Maritime Museum and Village
Functional object - Mincer, late 19th or early 20th Century
A meat grinder, commonly known as the meat mincer, is used for chopping meat into fine pieces. Alternatively, it can be used for the mixing of raw or cooked meat, fish and vegetables. It is the best way to process meat, and is a widely used piece of equipment by butchers and in the home.. Butchers have been known to use either mincing knives or meat cleavers in the kitchen for years to produce a quantity of minced meat. This was a slow and laborious process. The advent of the meat mincer has not only made the mincing process easier but also faster. The meat mincer has slowly evolved over the years into what it is today. The first meat mixer or meat mincer was invented in the 19th century by a German inventor named Baron Karl Drais. Although some versions of the device date back to much earlier. The oldest form of meat mincer was hand cranked which forced meat through a metal plate with several small holes in it, which resulted in long and thin strands of the meat. The meat was fed into the funnel that was placed at the top of the mixer. This meat would pass through a hand cranked screw conveyor that would squash and mix the meat before passing it through the metal plate. Needless to say, this was again a slow and laborious procedure to follow to produce large quantity of meat. With passage of time, this hand cracked machine became powered by electricity. The meat mincer has a great adaptability and efficiency now. The huge variety in mincer plates allows a butcher to produce different types of minced meat in any shape desired. However, traditional manual meat mincers have not really changed a lot. They are manually operated and made of cast iron, as earlier. They are similar to the original mincer designs, dating back to the early 1900s. Some butchers still prefer using a variety of mincer knives. Adapted from: https://brennan-group.com/blogs/news/history-of-the-meat-mincerThe development of the meat mincer enabled both butchers and home cooks to process and grind meat effectively.Clamp on meat mincer with handle for rotating the mincing apparatus inside.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, meat mincer -
Parks Victoria - Point Hicks Lightstation
Stand, pump & tank
Was the stand for a Chance Brothers air & oil containers fitted with pump handle & pressure gauges.This type of installation was once common and relied on the lightkeeper having to pressurise the cylinders manually at regular intervals throughout the hours of darkness. The oil was fed under pressure to the burner mantle. It is all that remains of an air and kerosene oil tank installation, with each rounded side formerly supporting a heavy iron tank. The containers would have been fitted with a pump handle and pressure gauges. An intact assemblage is displayed in the AMSA offices, Canberra with a text that explains ‘This type of installation was once common and relied on the lightkeeper having to pressurise the cylinders manually at regular intervals throughout the hours of darkness’.The system involved vaporising kerosene under pressure and mixing it with air and then burning the vapour to heat an incandescent mantle. The use of kerosene as a fuel to light the lantern became the most common system of illumination from the 1860s after the oil industry in the United States began to develop. The kerosene vapour burner was created in 1901 by British inventor Arthur Kitson (1859-1937) and perfected by Chance Bros for burning a more intense light in their renowned lenses. The lamp had to be watched throughout the night in case a mantle broke, and the tanks needed to be maintained by hand-pumping each hour or so. The Point Hicks lantern was initially lit by a six-wick Trinity house kerosene burner. This was replaced by the more efficient and brighter 55mm vaporised kerosene mantle burner in 1905, and the tank stand is probably original to this apparatus. Electricity eventually replaced kerosene at Point Hicks in 1964 making the tank installation obsolete, and the last kerosene system in an Australian lighthouse was replaced in 1985. Gabo Island Lightstation has a pair of tanks that are not attached to the optical system and are no longer in the lighthouse. They are also missing the pressure gauges that were formerly attached to the top of each cylinder. An intact tank assemblage is displayed at the Cape Schanck Lighthouse Museum it is detached and not original to the lighthouse. Although corroded, the remnant Point Hicks tank stand has first level contributory importance to the lightstation. It is significant for its provenance and historical value as part of the Chance Bros vaporised kerosene burner introduced in 1905 to intensify the light and improve the efficiency of the system. The rusted iron stand rests on four short legs and is shaped like a pair of spectacles. -
Mission to Seafarers Victoria
Poster, Art, Labour and Working Life, 2018
A poster printed by the RMIT in 2018, to promote an exhibition of works at the MTSV about the interelationships between labour, working life and artistic practice. BACKGROUND The Work of Art was an exhibition about labour, working life and artistic practice. The exhibition explored three aspects of art's relationship to work: (1) artworks about contemporary labour, (2) the labour of art-making itself and (3) the often precarious aspects of life as a working artist. Throughout the exhibition, different artists "worked" from the space of the gallery, revealing the layers of manual, emotional and intellectual labour involved in the work of art. CONTRIBUTION I was invited to develop the exhibition by the "Murphy Group", a group of researchers at RMIT. As the lead co-curator for the exhibition, I researched the history of artistic responses to working conditions. Through this process I identified a gap - while many artists have explored the conditions of labour and working life in their artworks, fewer have drawn attention to the working conditions of artists themselves. This became a key theme in the exhibition. The exhibition presented the work of nine contemporary Australian artists, including high profile and mid-career artists like Bindi Cole and Bek Conroy, alongside the work of emerging artists. In addition to the display of artworks throughout the space, five artists worked performatively, bringing to life the processes and manual labour involved in artmaking. A public forum extended the complex discussion on the relationship between art, work and labour. SIGNIFICANCE The works were presented in the context of a public space that has a strong relationship to contemporary labour - the Mission to Seafarers in Docklands. The Mission to Seafarers is a working mission that provides support to ship-workers. Presenting the works in this space created a real connection between the artworks and the lived experience of precarious labour. The exhibition reached a large audience including over 1000+ visitors in 10 days. It fostered a high engagement on social media and attracted media coverage including a feature in ArtsHub.A record of the ongoing involvement of the MTSV in art, and working with the art community by providing a suitable venue and display space.A3 size yellow paper promotional poster, double-sided. Three-quarters of the front of the poster is covered with the repeated line "Art, Labour & Working Life" in large font, to form ten rows. These rows are in outline form except for picked out words which are in entirely black characters and these cascade down, a row at a time, a word at a time, to form the same line ("Art, Labour & Working Life"). rmit, 2018, events, labour, working life, artistic practice, hiring event, cultural events, multimedia, nicholas walton-healey -
Kiewa Valley Historical Society
Register School Administration, Absence Register School No. 2539 Mullindolingong, circa 1910
Historical look (early 20th century) at the administrative requirements for the running of a small country school. The level of accountability was limited to a monthly report and a visit from the District Inspector. This was still in the era where paper reporting was utmost and faster electronic reporting had still to be implemented.The significance of this register is that it highlights the need in the early 1900s for travelling time, to and from, the duties required at a small country town to be detailed closely for a bureaucracy that was relatively isolated within the larger cities of Australia. Decentralisation of not only government but also of industry had not as yet entered the Australian environment. This register also shows that the written word was clearly hand scribed and thereby a more personal form of communication. This was still in the age where you " can tell a lot about a person from their handwriting" Lucy Goonan was Leonie Prime's relation and came from Glen Creek to teach at Mullindolingong School for a couple of years. None of the other names are 'known' names from the district.Green coloured cardboard backed book with two large staples holding each page at the left side of the spine Each page of has been folded in half from a 51cm overall length to produce each individual page of the register. This method of production of the book provides 25 double sided pages. Markings on cover " Absence Register, School No........ At ......." Markings on inside cover " ABSENCE REGISTER." Underneath this heading there are six explanatory and conditional usage. Each page is printed with the heading ABSENCE REGISTER and underneath "Roll No. 191(part of initial year reference), Record No. Name of Teacher Position Date of Absence Cause of Absence No. of times absent from beginning of year, total number of days absence and remarks requirements staff /reason/time taken during the period 1923 to 1950. Each page was printed with only three numbers of the calender year 191-.This was so that each year could be manually inserted.teachers absence register small school administration, mullindolingong school 1923 -1950 -
Ringwood and District Historical Society
Book, Collection of nine medical books 1900-1935 belonging to Nurse Maggs and descendants (1973), of Ringwood, Victoria
Nurse Marianne Maggs undertook medical care and midwifery from 1900 - 1926 and delivered more than 500 babies. She was presented with a "wireless" in 1926 in appreciation for her services to the community. She sold her Ringwood house and moved to Mitcham. 10 medical books from 1909 to 1935 1 . Homeopathic Vade Mecum Medical and Surgical by E.H.Ruddock M.D. Xmas gift from G Smith to Nurse Maggs 1909 2. The Doctor at Home Ed. by George Black Presented from friend to Mrs. A Maggs 12-12-1909 3. Illustrated Family Doctor 1935 4.The Practical Guide to Health Frederick Rossiter 5. Johnson and Johnson's First Aid Manual 1909, including booklet - Accidents in the Home 6. Diseases of Infants and Children and their Homeopathic Treatment Dr. Ruddock 1910, including lock of (child's?) hair. 7. Home Nursing St. John's Ambulance 1939 8. First Aid to the Injured 1921 (2 copies) 9. Modern First Aid A.S. PLayfair 1973