Has a strong association with tram crews, possibly inspector (Dave Kellett?) in Ballarat. Prepared by Dave Kallett to undertake follow ups and to assist in the training of crews by checking their knowledge.Black gloss paper covered notebook or address book, titled "Where is it?, use by Dave Kellett? as a note book to record questions for tram drivers, when acting as an inspector. Note book has tabs marked for "A to W". Notebook consists of four sections, sewn into the spine, with glued full page covers. Gold block on top and bottom edges. Last few pages torn out. Each page ruled with blue and red lines at the top. Has a decimal currency conversion table in the front inside cover and a 1967 calendar on the rear inside cover. On bottom of rear cover, stamped, "Made in Japan". Handwritten questions cover various driving and electrical aspects of the trams, both 4 wheelers and bogie trams. Full scan of document added as a pdf file 5/6/2019.trams, tramways, notebooks, training, tramcar equipment

Has a strong association with John Prisk, ESCo tram driver of the 1910's and demonstrates the importance of being a union member at the time and the badge provided by the unionAustralian Tramway Employees Association (Tramways Union) badge. Badge made on a brass or metal backing with a gold (9ct) plating with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a steel ring through a hole in the top of the badge. On back of badge has stamped into the badge "John Prisk / Member / Since 1912". On the base of the badge has words "APFX 9ct" stamped into the bottom of the badge. See image files for front and back of badge. See worksheets in Reg. Item 3140 for details about Jack and his SEC driving career.tramways, trams, sec, drivers, esco, unions, badges, aeta, employees

Yields information about the tramcar maintenance activities of the SEC at the depot in frequency of changing brake blocks, light bulbs, trolley rope and wheels for each tramcar. This book was the last to be done by the SEC in Ballarat, closure occurred on 19/9/1971.Collins Diary No. 324, blue Rexene covers, sewn sections with ruled sheets providing a diary for 1971, 7 days and notes for each double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat depot to record brake block changes and light globe replacements on each tramcar. Also gives details on trolley rope and trolley wheel replacements. The last recorded entry was 14/9/1971, for fitting of second hand shoes to 34 and 42. Inside front cover were: 1 - loose - carbon copy of a "Notice to All Traffic Staff" regarding braking - See Reg Item 3520. 2 - loose - carbon copy of run number 25, Monday to Friday - See Reg Item 3521. These are to be retained with the item, but in a separate container.tram, trams, sec, ballarat, depot, brake blocks, trolley wheels

This style of jumper has a long history in the Royal Australian Navy, descending from the uniform style of the 19th century Royal Navy.Navy blue long sleeved, heavy-weight jumper with square rig collar. On left sleeve is an embroidered patch with the word "AUSTRALIA," underneath which is an anchor insignia and three downward pointing chevrons in gold embroidery thread. On right sleeve is an embroidered patch with the word "AUSTRALIA" on the upper shoulder, underneath which is an embroidered gold wheel on a semi-circle shaped patch. The jumper has a deep neckline, tied with a cotton navy tie. Accompanying collar (0036.2) attaches to the jumper via three navy blue plastic buttons at the back of the neck, and three navy blue plastic buttons running down both left and right interior neckline. The jumper has a zip on the left hand side which runs from the hem to the waist.On patches "AUSTRALIA" Interior label at back of neck reads "ADA/2001/[broad arrow]/NSN: 8405 66 132 2508/SIZE: 111 L/NO/NAME/WOOL/POLYESTER/DRY CLEAN ONLY"royal australian navy, uniform, marine, shirt, australian defence apparel, ratings

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Rosa Buggy replicates the vehicle that enjoyed respect from the public during the 1880's. There were four horse drawn models as well.A model of a Rosa Buggy which is a lightweight two wheeled two passenger open horse drawn carriage where the driver sits behind. It has two large gold painted spoked wheels with black rims, brown padded seating and silver painted armrests. There are two long brown wooden shafts on each side to surround the horse. It has a model of a cream coloured horse with a white tail and mane, which has the necessary horse tack for carriage use to help the driver communicate with the horse. It was designed by Duncan & Fraser of Adelaide initiated by the wife of one of the company's directors who gave it her name. It was a hybrid of the Dog Cart and Ralli Trap, a fair weather vehicle favoured by ladies of refinement. It was mounted on Brewster Gear and was inclined to bounce, so was driven gently.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses

A badly damaged red fabric hardcover book Pals Annual for the Boys of Australasia with a black, red and white lined illustration on the front cover in a large square of a cowboy cracking a whip on a farm. The covers are detached from the pages which are tanned, some torn and with foxing on the edges. There are a year's worth of magazines included date from Volume 1 No.1 Sat August 26 1922 to Volume 3 No. 34 Saturday April 14 1923. Price 3d. each. There are black and white illustrations throughout , and a coloured plate,. There is a coloured plate frontispiece as well as a green background lined illustration. At the end of the book is a lengthy story, Wilson's Wheel by Andrew Walpole. p. 817 - 854. There are missing pages 847 - 850. Total p. 854.fictionA large annual for Australasian Boys of Pals weekly magazines from Sat August 26 1922 to Sat April 14 1923 including a lengthy adventure story at the back - Wilson at the Wheel.children's magazines, boys annual, adventure stories, australian fiction

Graham WOOD Wartook Pottery was set up in the early 70s by Graham Wood, and was sucessful for nearly 25 years. It then moved to Halls Gap (The Grampians, Victoria), and the name was changed to Jimmy's Creek Pottery in 1998. The pottery conitnued under that name until 2003. when cheap imports hurt the business. Hand thrown ceramic bowl with 'Gum Leaf' design and the word 'sugar'. According to decorator Wendy McGuiness all decoration was made and applied by hand - an extremely time consuming activity. Texture to the body of each piece was created by using a piece of coral. Tenmoku glaze was applied to the top of the pieces, with iron oxide to the main body. This was the first of the Wartook range that sold commercially from around 1987 all over Australia. At the height of production Wartook Pottery had 5 employees, including a new wheel potter (who was adept at creating the pieces as Graham had done before). Additional ranges were still hand thrown, but with a floral wreath (slip cast) applied to the top of each pot, as well as a range that used decals for decoration. australian landscape pottery, les macleman, ceramics, landscape, graham wood

Model tram - B or B1, number 2002 made by The Met for their model tram at the Royal Show Melbourne c1985. Consists of: 1 - 2 x Fibreglass sections - one with a pantograph, painted in The Met colours with number 2002 with destination of "Special". Pantograph made from wire. 2 - small articulated section made from fibre glass and black vinyl, painted yellow and green. 3 - two sets of heavy duty electric motor, geared to two sets of four wheel bogies and one unmotorised bogie with a centre pins, washer and split pin that secured the articulated section of the tram. Each set number on side "MTA No. 7A and 9B" Made from brass, steel, plastic - purpose made. Placed with two sections of O gauge track - each 340mm long.trams, tramways, models, b class, the met, royal show

A series of three Black and white photographs of tram T class 182 at the Williamstown Road terminus of the Footscray tram system, c1960. Tram photograph in Somerville Road. All showing the return destination of Russell St. .1 - Shows the shops in the background. Trolley pole reversed and appears the driver is about to enter the cab of the tram. Has the run number F6. Has a Caltex, Ampol, Kix and Caravan park sign in the background. .2 - 182 at the terminus with trolley pole reversed and under the wheel locating guard. Has Run No. F5 in the rear cabin window. .3 - ditto, but before trolley pole reversed with passengers leaving the car and one lady waiting to board. Printed on Fujichrome paper. Not known who took the photograph or when it was printed. Two copies of .1 held.Stamped in black ink on back "TMSV Sales"trams, tramways, footscray, williamstown rd, somerville rd, tram 182, t class, mmtb

Graham WOOD Wartook Pottery was set up in the early 70s by Graham Wood, and was sucessful for nearly 25 years. It then moved to Halls Gap (The Grampians, Victoria), and the name was changed to Jimmy's Creek Pottery in 1998. The pottery conitnued under that name until 2003. when cheap imports hurt the business. Hand thrown ceramic bowl with 'Gum Leaf' design and the words 'pot pouri'. According to decorator Wendy McGuiness all decoration was made and applied by hand - an extremely time consuming activity. Texture to the body of each piece was created by using a piece of coral. Tenmoku glaze was applied to the top of the pieces, with iron oxide to the main body. This was the first of the Wartook range that sold commercially from around 1987 all over Australia. At the height of production Wartook Pottery had 5 employees, including a new wheel potter (who was adept at creating the pieces as Graham had done before). Additional ranges were still hand thrown, but with a floral wreath (slip cast) applied to the top of each pot, as well as a range that used decals for decoration. australian landscape pottery, les macleman, ceramics, landscape, graham wood

Graham WOOD Wartook Pottery was set up in the early 70s by Graham Wood, and was sucessful for nearly 25 years. It then moved to Halls Gap (The Grampians, Victoria), and the name was changed to Jimmy's Creek Pottery in 1998. The pottery conitnued under that name until 2003. when cheap imports hurt the business. Hand thrown ceramic bowl with 'Gum Leaf' design and the words 'pot pouri'. According to decorator Wendy McGuiness all decoration was made and applied by hand - an extremely time consuming activity. Texture to the body of each piece was created by using a piece of coral. Tenmoku glaze was applied to the top of the pieces, with iron oxide to the main body. This was the first of the Wartook range that sold commercially from around 1987 all over Australia. At the height of production Wartook Pottery had 5 employees, including a new wheel potter (who was adept at creating the pieces as Graham had done before). Additional ranges were still hand thrown, but with a floral wreath (slip cast) applied to the top of each pot, as well as a range that used decals for decoration. australian landscape pottery, les macleman, ceramics, landscape, graham wood

James Reid was born in Scotland near Glasgow and came to Victoria as a young man in 1854. Shortly after arriving he came to Bacchus Marsh where he lived until his death in 1902 at the age of 74 years. For most of these years he conducted a wheelwrights and coach builders business in Bacchus Marsh. In the nineteenth and early twentieth centuries, wheelwrights and blacksmiths played an essential role in the functioning of the whole community. Before the industrialisation of manufacturing, wheels and other components of vehicles for transport, all metal objects, including farm implements, building requirements and domestic utensils were made by hand. As mechanisation of industry increased, the smith commonly performed the role of farrier in the times when horse power was pivotal to all aspects of society. Small sepia unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll' The photo shows a plain brick house with a central front door with a window on either side. There are a further two windows along the side of the house. On the left-hand side of the building there is a smaller room with its own entry door. The main roof is tiled with shingles or slate and features two substantial chimneys. At the front of the house stands a young woman with her hands clasped. A horse can be seen at the rear of the house. From the photo of the James Reid Wheelwright and Blacksmith Shop, Victorian Collections No.VC 618, we know that this house stood to the rear of the workshop. The wheel tracks which can be seen lead out to Main Street. On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE houses bacchus marsh, stevenson and mcnicoll 1883 photographs of bacchus marsh and district, james reid 1828?-1902, wheelrights bacchus marsh

In 1893 Harry Crowther Slingsby founded the company the family firm was at first wholesale bottlers and had established themselves in Bradford, England, later they had a branch in London. Harry Crowther Slingsby began to look into the invention of labor-saving devices for the company. He had recognised that working practices in the local factories relied heavily on manual hauling and gravity for the movement of raw materials and products from floor to floor. However, this did not solve the problem of moving items horizontally around large buildings. Slingsby then set about creating robust trucks and trolleys to move heavy loads with relative ease. Different designs were created for different purposes sack trolleys for moving large sacks of flour, sugar and dried fruit around grocery stores; high wheeled flat carts towed by one or two people; trucks fitted with wicker baskets carried fibers around textile mills and railway platform trolley to move luggage. The company is still in existence today manufacturing many different types of products.An item from the early to mid 20th century connected with railway memorabilia and a company that had humble beginnings to become today a leading UK manufacture. Railway platform luggage trolley large metal frame & wood top with 4 black metal cast iron wheels & metal structure at front with holes to put rope/harness through. Front 2 wheels swivel. Trolley painted red. Wheels are marked Bradford & Londonflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

One of two types of four wheel skips widely used on the Wonthaggi Coal Fields for transportation from the underground workings to the surface screening and loading areas. Haulage underground was accomplished by the use of pit ponies, whilst an endless rope system was used to bring the skips to the surface areas. Much of the coal for the colony of Victoria was sourced from Newcastle and the Hunter Region in New South Wales, along with local supplies from private and co-operative coal mines at Outtrim, Jumbunna and Korumburra in Gippsland. After the 1909–1910 strike by coal miners in the Hunter Valley, the Victorian state government were determined to ensure stability in local supplies of coal. The State Coal Mine and the town of Wonthaggi came into being in 1910 to supply coal for the Victorian Railways. It was one of the largest and most dangerous collieries in Australia. At its peak in 1926 the mine produced 2,435 long tons (2,474 t) per day, with the Victorian Railways buying 90% of production. In 1928, Wonthaggi coal accounted for around 60% of Victorian Railways coal consumption.Historic - Industrial - Victorian Railways - Narrow Gauge Railway rolling stock - Wonthaggi Coal Fields, Victoria, AustraliaRectangular steel bin with wood frame and steel wheelspuffing billy, coal skip, wonthaggi, wonthaggi coal fields, 2'0" gauge, brown coal

Ballarat - Gives details of where purchased from , date of purchase, type, body builder, seating capacity, overall length, overall height, overall width, condition of tram, trolley base, Lightning arrester, controller make and type, Truck Maker and type, type of truck, axle type, wheel base, axle diameter, motors type and maker, Motor horsepower, Armature bearings, suspension bearings, gear teeth, Air compressor make and type, Brake Valves make and type, Governor make and type, Weight in tons and details of advertising space in racks. At base has typed (original) list of trams of the two types, single truckers and bogie trams. List of trams includes the scrubber and No. 20 which was scrapped prior to system closure. See also 3430 and 8722 for other versions - different dates and 8690 for a Bendigo list. Note: Framed copies of both Ballarat and Bendigo are held in the depot. Some changes have been made to the tramcars since the preparation of this sheet and there are some errors and differences. See also Reg Item 6879 for an annotated version.Yields information about the dimensions and equiipment on Ballarat Tramcars operated by the SEC.Typed List (Carbon copy) of tramcars and their details for Ballarat dated 11 May 1961, titled "Numbers and Particulars of Trams". Two sheets which have been taped together. tramcars, ballarat, equipment, lists, data

Ballarat - Gives details of where purchased from , date of purchase, type, body builder, seating capacity, overall length, overall height, overall width, condition of tram, trolley base, Lightning arrester, controller make and type, Truck Maker and type, type of truck, axle type, wheel base, axle diameter, motors type and maker, Motor horsepower, Armature bearings, suspension bearings, gear teeth, Air compressor make and type, Brake Valves make and type, Governor make and type, Weight in tons and details of advertising space in racks. At base has typed (original) list of trams of the two types, single truckers and bogie trams. List of trams includes the scrubber and No. 20 which was scrapped prior to system closure. See also 3430 and 8721 for other versions - different dates and 8690 for a Bendigo list. Note: Framed copies of both Ballarat and Bendigo are held in the depot. Some changes have been made to the tramcars since the preparation of this sheet and there are some errors and differences. See also Reg Item 6879 for an annotated version.Yields information about the dimensions and equiipment on Ballarat Tramcars operated by the SEC.Dyleline print of a typed List of tramcars and their details for Ballarat dated 5 September 1966 (typed on), titled "Numbers and Particulars of Trams". tramcars, ballarat, equipment, lists, data

In 1977, artist Annette Meikle undertook a commission to illustrate a book recording stories of places and people in the Bayside area. It was published in 1978 as Sandringham Sketchbook, with text by Elizabeth Waters. The sketches were intended to record remaining examples of Bayside’s early architecture and environment, as well as reflect newer architectural changes. Meikle went on to donate 22 of these sketches to Bayside City Council in 2003. Tasmanian architect J.H. Esmond Dorney developed this ground-breaking design for the Sandringham Hospital, which opened in 1964. Dorney had spent significant time recuperating in hospital in the post-war years and developed a special interest in hospital design. The hospital included circular wings with nurses’ stations at the hub and wards radiating outwards like spokes on a wheel. The hospital included 100 beds, two operating theatres and four delivery rooms and baby nurseries. Each ward of two to four beds had its own bathroom, and featured wide windows with garden views. The design was considered radical at the time and was copied as far afield as England and the United States.Annette Meikle, Sandringham Hospital 1977, ink and watercolour, 25.5 x 35.5 cm. Bayside City Council Art and Heritage Collection. Donated by the artist, 2003annette meikle, sandringham sketchbook, elizabeth waters, sandringham hostpital, jh esmond dorney, hospital, architecture, sandringham

Gladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals the City of Moorabbin and she used these patterns to make clothes etc.for her family and the Choral Society. Madame Weigel who migrated to Melbourne in1877 with her husband Oscar; began publishing in 1878 and distributed paper patterns of the latest fashions, throughout Australia and New Zealand, She and Oscar became the first commercial manufacturers of paper patterns in Australasia, and to publish Weigel's Journal of Fashion (1880-1915) and Madame Weigel's Journal of Fashion (1915-1950). Madame Weigel had an enormous following of women who used her patterns across the generations, and across the life cycle from babies to 'matrons'. Madame Weigel died in 1940 aged 92 years. Finally, after 91 years of business and millions of patterns sold, Madame Weigel's paper pattern business closed in 1969.Gladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals in the City of Moorabbin and used these patterns for clothes etc for members of her family and the Choral Society. Madame Weigel was one of the most remarkable of early Australasian business women.A black and white booklet of 37 pages with advertisements, sketches, articles, photographs, knitting,crochet and tapestry instructions, dressmaking patterns and recipes. Volume LV111 pages 122 - 159 completeFront Cover ; Registered at the General Post Office Melbourne for transmission by post as a Newspaper / 4d / Published Monthly / MADAME / WEIGEL'S / JOURNAL OF FASHION / Vol LV111 No. 688 / A Delightful Home Journal / JUNE 1, 1937 / 58th YEAR OF PUBLICATION / Illustrated at Right - / Crocheted Cushion of / Unusual Design./popular Bed-Jacket. / ( Daisy Wheel Design) /Illustrated at Left - FREE Pattern ; / Lady's Costume Coat. / 34 Inches Bust Meas. Back Cover : Advertisement for Bushells Blue Label Tea / Printed and Published by Geo. Humphries for Madame Weigel Pty Ltd , Lennox and Rowena Sts., Richmond. Vic.haberdashery, cotton, lace, pillow cases, sheets, clothing, dressmaking, needlework, market gardens, dairy farms, lacework, craftwork, moorabbin shire, bentleigh, moorabbin, cheltenham,reed gladys, clark judy

Framed colour photograph of mounted escort for HRH Prince Charles and Princess Diana at Hopkins Barracks, Puckapunyal, 31 October 1985. Names of men and horses are listed across to bottom margin of the photograph. Also engraved title plate at centre lower edge.On plate: "8/13 Victorian Mounted Rifles escort of Prince Charles and Princess Diana"; Roll of men and horses: "No 1 Section Cpl Walch, Tpr Wilson, L/Cpl Hodge, horses: Banjo, Rusty & Honey. No 2 Section: Cpl Floreny Tpr Hughan, Tpr Lewery, horses: Blamey, Ben & Foxy. Wheelers: Capt Morrison, Cpl Morris, horses: Posyie & Ardian. No 3 Section: Tpr Ellison, Tpr Freischmidt, Tpr Tousel, horses: Spirit, Flicka & Romel. No 4 Section: Cpl Dudley, Tpr Walsh, Tpr Hooper, horses: Annie, Magar & Kilter. 31.10,85 By Tpr Ellison"royal, charles, diana, hopkins, puckapunyal, light horse, vmr

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 125 NQR - Open Medium Truck 20/ 5/1910 NWS Built new VR Service History *NQR 125.VA - 20/ 5/1910 NWS Built new - / /1926 - To NQ 125.VA - Puffing Billy Service History or Notes Untrafficable at Emerald Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck125 NQR - Open Medium Truck made of Steel and metal125 NQRpuffing billy railway, pbr, rolling stock , 125 nqr - open medium truck, nqr open medium truck, victorian railways

B&W photo shows Cissie Johns and another person who may be her brother Percy, sitting in a jinker. A dark horse with a white blaze is harnessed to the jinker. Cissie is seated nearest the camera. She is wearing a pale wide-brimmed hat and pale clothing. Her long fair hair is loose around her shoulders. The other person is holding the reins and is wearing a dark hat and pale shirt. This photo may have been taken at the same time as M0104. The subjects are facing south. The sun is shining. They are on a flat expanse of grass. Beyond them are several cypress trees. These are most likely part of the cypress hedges lining the driveway to Glen Park Farm farmhouse. In the background is the eastern flank of Black Hill. A small shed can be seen beside the driveway, partly obscured by the jinker's wheel. Dated c.1913.

Black and white photo showing three adults and two children with a horse and cart. Mr Archibald William Muirhead, of 7 Colby Drive, Belgrave Heights (then called Glen Rd) stands to the left of the cart with his left hand resting on the wheel and his right hand on his hip. His left leg is crossed in front of his right leg. He is wearing a light-coloured suit. Sitting in the cart are two women and a boy and a girl. The girl is Pam Harris. They are on a dirt road with trees on either side. Behind them is a cleared area with more trees in the background. The photo was taken on Glen Road close to Monbulk Creek. On the back of the photo is printed '1627'. It probably dates to the 1940s and is part of a collection of family photos donated by Pam Harris, Shire of Sherbrooke President, 1982-1983 & 1987-1988.

Black and white photograph of SEC Ballarat No. 21 decorated for the 1969 Ballarat Begonia Festival. Photographed at a Wendouree Parade crossing loop by Brian Weedon 2/3/1969. Tram is painted white - based on the Myer's Christmas tram of 1968 (See Reg. Item 1881) and used later for the Ballarat Base Hospital Appeal May 1969 Begonia Festival (See Reg. Item 1885). Theme: Festival Showboat. Tram has destination of "Gardens via Drummond Nth", a sign under the headlight "Begonia Festival Feb. 28 Mar. 10". On the side of the tram has the various festival activities within circles and a paddle wheel with the words around it of "Festival Showboat" The roof advertisement board says "Ballarat Begonia Festival Feb. 28 March 10th 1969" and on the base of the sides a sign saying "Wave upon Wave of Festive Activities". On rear in black ink "Ballarat 2nd March 1969 / Photo by Brian Weedon" and hand stamped two processing items, including a date "11.3.69".trams, tramways, begonia festival, decorated trams, wendouree parade, festival, tram 21

Two copies of a Carbon typed copy of a technical procedure - 6 pages - "Extract from the 'Proceedings of the Electrical Association of New South Wales' session 1910 - 11" - giving advice on the location of Trolley Wire" giving the guide on how to locate trolley wire on curves and junctions, gives formulas, positioning at frogs, notes regarding various cars and trolley wire height includes notes on cross falls of track, a table of aluminium copper alloys - bending strength and failure modes. Consists of five pages with two blue print drawing. Each page has been scanned the blue print drawings reversed imaged as well. 4768.2 - blue print drawing showing references in the various formulas etc used. 4768.3 - ditto showing tracking for four wheeled and bogie cars and other diagrams for turnouts, frog locations and frog angles. BTPS Number "219". "226" in ink on left hand bottom of first pagetrams, tramways, overhead, trolley wire, points

Replica Australian Tramway Employees Association (Tramways Union) badge. Badge made on a steel/ silver backing with words "Australian Tramway Employees Association" on inner edge of badge with a black background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a steel ring through a hole in the top of the badge. On the outer edge with red background "Centenary Brisbane General Strike 1912-2012". Badge has a metal clip on the rear. Contained within a plastic envelope, "Centenary Brisbane General Strike" and details of the even printed on a piece of light card. Printed in Association with the book "One American Too Many" - see One American Too Many, Boss Badger and the Brisbane Trams, David Burke, Published Queensland Museum 2012.tramways, trams, unions, badges, atea, employees, brisbane

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a three horse drawn enclosed coach replicates the vehicle that enjoyed respect from the public during the 1880's. There were four horse drawn models as well.A model of a black enclosed coach which is a four wheeled passenger horse drawn vehicle where the driver sits at the front behind the three brown horses. It has two large and two smaller gold painted spoked wheels with black rims, two gold painted coach lamps, black padded seating and four open windows with blinds that are rolled up. There are two doors with a step for easy access into the coach. A long brown wooden shaft separates the horses which also have black vinyl shaft style straps on both sides as well as the necessary horse tack for carriage use to help the driver communicate with the horses. A hand operated brake is next to the driver with the brake pads attached to the back wheels. There is a brown wooden slotted luggage rack at the back held on by two gold chains. On top of the coach is a decorative gold painted luggage rack. replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, road transport, coaches

The collection of thirteen horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a one horse drawn buggy replicates the vehicle that enjoyed respect from the public from 1833 until 1935. It came in four types.A model of a black enclosed buggy and horse, with two doors and two tinted windows. It is a two wheeled two passenger horse drawn carriage where the driver sits behind on the high seat with silver armrests. The body is low to the ground, making it easy for passengers to board and disembark as well as allowing for speed and is lightweight for one horse to pull, making the journey cheaper than using four horses. It has two black spoked wheels with silver rims, brown seating, silver handles on the doors and two black coach lamps at the back. There is a silver step on the side of the body near the footrest to aid alighting and disembarking.There are two long shafts on each side to surround the horse. It has a model of a brown coloured horse with a white tail and mane, which has the necessary horse tack for carriage use to help the driver communicate with the horse. replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 29 NQR - Open Medium Truck with drop ends VR Service History 15/12/1898 NWS Built new *NQR 29.VA - 15/12/1898 NWS Built new - / /1926 - To NQ 29.VA - NQ 29.VA - /10/1954 - Sold (to) - Puffing Billy Service History or Notes July 2016 - LiftedHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck with drop ends29 NQR narrow gauge Open Medium Truck with drop ends made of Steel and metal 29NQRpuffing billy railway, pbr, rolling stock , 29 nqr, narrow gauge rolling stock, victorian railways, nqr wagon

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 151 NQR - Open Medium Truck 24/ 9/1910 NWS Built new VR Service History *NQR 151.VA - 24/ 9/1910 NWS Built new - / /1926 - To NQ 151.VA - NQ 151.VA - circa 1965 - To NQR 151.PA (v) NQR 151.PA - / /1974 BEL Photograph #217.12: loaded firewood Puffing Billy Service History or Notes Untrafficable at Emerald has 6 NB sitting on it Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck151 NQR - Open Medium Truck made of Steel and metal151 NQRpuffing billy railway, pbr, rolling stock , 151 nqr - open medium truck, victorian railways, nqr - open medium truck