Over 1962-63, plans were drawn up for the conversion of the main building into administrative offices and a rehabilitation centre. As the children were now located at the school in Burwood, and with funds achieved from the sale of the old factory buildings to the Alfred Hospital, the St Kilda Road building could expand room for its office workers and provide greater floor space to rehabilitation staff. These plans show the proposed conversion from bedrooms to administrative and rehabilitation areas.7 architectural plans and 1 letterJohn F D Scarborough and Partners, Architectsroyal victorian institute for the blind, plans

The interviews were recorded in 2000 by Bronwen Gray and Alan Young for the production of Unreserved, Stories from Truganina Explosives Reserve, animated stories from past residents, workers and interested people of the Reserve (subject to copyright 2004). As the then President of the Inner West Branch of the National Trust, Hugh was unaware of the Truganina Explosives Reserve until contacted by Nessie Hardy about the proposed sale of the site by the State Government. He was struck by the industrial, environment and indigenous significance of the site A primary source of information on memories of the Truganina Explosives Reserve and Altona,VictoriaDigital copy of original cassette recorded in 2000 and digitised in 2018nessie hardy, cheetham salt works, migratory birds, explosives reserve, explosives, point gellibrand, national trust, tin fence, sand ridges, altona skipper butterfly, middens, aboriginal occupation, judy hindle

Run as part of recruitment campaign in 1996, a decade on from the 1986 Victorian 50-day nurses strike, the longest strike in Victorian nursing history. The 1990s saw new challenges for Victorian nurses, as the state government oversaw the widespread privatisation of the public health service and industrial reforms that gave greater power to employers. This resulted in site closures and the watering down of worker rights and conditions. This sticker recognises that the challenges for nurses are ongoing and encourages collective action.Rectangular gold and blue sticker. Sticker has warped and faded due to age. Sticker printed with 'Nurses act in '96 protecting gains of '86', the Australian Nursing Federation logo and 'Join the ANF Tel: 9347 0333'.nurses, nursing, australian nursing federation, sticker, stickers, campaigning, trade unions, labour history, victoria, jeff kennett

From the 17th century, sadirons or sad irons (from Middle English "sad", meaning "solid", used in England through the 1800s) began to be used. They were thick slabs of cast iron, triangular and with a handle, heated in a fire or on a stove. These were also called flat irons. A laundry worker would employ a cluster of solid irons that were heated from a single source: As the iron currently in use cooled down, it could be quickly replaced by a hot one. An antique heavy cast iron sad iron (from Middle English 'sad' meaning 'solid') with a rounded cast iron handle. It has a roughened surface with a decorative pattern on the top of the iron. 'Silverston Metals' irons, laundry irons

The photographs shows MMTB track renewal work in Flinders St during 1971. The first photo shows W2 tram 408 and a wide body tram behind running while work is being carried out, with several workers standing clear. The second photo shows a replacement cross over installed near Queen St. In the background are Flinders St Station and the Gas and Fuel buildings. Fletcher Jones building is on the left hand side of the second photo.Yields information about undertaking trackwork while running trams and the minimal closing of the roadway to motor traffic.Black and White photograph with photographer's notes on rear"Flinders St 1971" and "Dave Macartney"trams, tramways, trackwork, flinders st, w2 class, tram 408

From the 17th century, sadirons or sad irons (from Middle English "sad", meaning "solid", used in English through the 1800s) began to be used. They were thick slabs of cast iron, triangular and with a handle, heated in a fire or on a stove. These were also called flat irons. A laundry worker would employ a cluster of solid irons that were heated from a single source: As the iron currently in use cooled down, it could be quickly replaced by a hot one. An antique heavy cast iron sad iron (from Middle English 'sad' meaning 'solid') with a rounded cast iron handle. It has a roughened surface with a decorative pattern on the top of the iron. irons, laundry irons

From the 17th century, sadirons or sad irons (from Middle English "sad", meaning "solid", used in English through the 1800s) began to be used. They were thick slabs of cast iron, triangular and with a handle, heated in a fire or on a stove. These were also called flat irons. A laundry worker would employ a cluster of solid irons that were heated from a single source: As the iron currently in use cooled down, it could be quickly replaced by a hot one. An antique black heavy cast iron sad iron (from Middle English 'sad' meaning 'solid') with a rounded cast iron handle. It has a roughened surface with a decorative pattern on the top of the iron. 'LYNC' is stamped on the cast iron inside a star shape. 'W' is stamped on the left side, 'C' is stamped on the right hand side. irons, laundry irons

From the 17th century, sadirons or sad irons (from Middle English "sad", meaning "solid", used in England through the 1800s) began to be used. They were thick slabs of cast iron, triangular and with a handle, heated in a fire or on a stove. These were also called flat irons. A laundry worker would employ a cluster of solid irons that were heated from a single source: As the iron currently in use cooled down, it could be quickly replaced by a hot one. An antique heavy cast iron sad iron (from Middle English 'sad' meaning 'solid') with a rounded cast iron handle. It has a roughened surface with a decorative pattern on the top of the iron. irons, laundry irons

Photograph shows five tramway crews with their pannikins around the hot water boiler at Hanna St depot, all smiling and except for one, wearing their caps. From The Herard, 17 Jan. 1948 - Trove link. Story includes conductress Beryl Hall leaning out from a tramcar doorway. The Trove link has a story about the end of a 13 day strike by Melbourne tram workers - see reference for Trove link and background to the photo.Yields information about a 13 day strike and crews returning to work.Black and white photograph with an undated press cutting on the rear. "Vict Tramways" on rear in pencil.tramcars, tramways, hanna st depot, south melbourne depot, crews

Clothes brushes are still used today but they were of more importance in the days when white collar workers, both men and women, wore suits and hats and tailored clothing to work and these required frequent brushing to keep them looking good as they were not washable items. Formal work clothes were more likely to be worn, particularly by men, in the 20th century up to about 1970. This case with two brushes would have been used particularly in times of travel. This item is retained as an example of a household item of the past and will be useful for display purposes..1 -This is a brown oval-shaped leather piece rolled over to make a container or case. It has a leather and metal strap and buckle stitched into the front of the case. The leather case is slightly worn and stained. .2 & .3. -The case contains two oval-shaped clothes brushes that have light brown wooden polished backs with yellow/light brown horse hair tufts attached to the back. .1 - L 14 cm. W 8.5 cm. D 8 cm. .2 & .3 - L 12. 5 cm. W 8 cm. D 3.5 cm. household items, history of warrnambool

The Terminus Hotel opened in January 1884, coinciding with the opening of the railway. The hotel had a close connection with the railway, catering for travellers and relieving railway workers. In December 1903 the original wooden structure burnt to the ground. The hotel was rebuilt in 1904 in much the same form see Record No 00306. Mr Andrew Kelly of Nullawil took over the enterprise circa 1930 giving it a new look in the 'Art Deco' style of the period. Mr Kelly and family ran a successful hotel business for forty years.Copy of a B&W photograph of the Terminus Hotel, situated in Broadway Wycheproof circa 1930s. Of brick construction, featuring arch entrance doorways and windows. A verandah protects the street facade. The architecture represents the 'Art Deco' period.Nonehotel wycheproof broadway, men clothing, art deco 1930s

This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch

Loading buckets of fruit, probably raspberries from "The Oaks" Thomson family property, Kinglake into a covered cart hitched to a horse by four hatted farm workers. Most likely the fruit was headed to the "jam factory" at Kinglake operated by the Kinglake Fruit Growers Preserving Company which was formed about 1900. The fruit was pulped as the first step in the process by beng cooked in a steam bolier. The barrels of processed druit pulpt were then transported in barrels by horse and cart to the Whittlesea railway station.This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital image 4 x 5 inch B&W Neg 12.5 x 9 cm printshire of eltham pioneers photograph collection, kinglake, harvesting, pioneers and painters, fruit industry, market garden

This tuyere (word from French origin) was used by professional blacksmiths and or cattlemen before and during the Kiewa Hydro Electricity Scheme was being constructed. The need to use a furnace or forge in the shaping of metal rods, horse shoes and pipes is both a rural necessity and a construction, on site requirement. The "inventiveness" of cattlemen and construction workers to produce metal objects not available "off the shelf" is one of the inherent traits not only of rural self sufficiency but in the "pioneer" days of rural isolation one of survival.This tuyere is of great significance to the Kiewa Valley and its regions because it highlights one of the greatest strengths of the rural (especially isolated) life and its folk living there, and that is the great human factor of adaptability and survival techniques in sometimes harsh and demanding environmental circumstances. The inventiveness and the attitude, "she'll be right mate", demonstrates life on the land where specialised blacksmith activities can be found in non "professionals" because of the fact that "someone" has to do the job. This is one of the differences between country "rural" life and that found in cities and larger towns.This iron cone shaped tuyere has a small hole (diamenter 25mm) starting within an ever enlarging cone (amplification of the air pressure going through) delivering varying hot or extremely hot air into a furnace or hearth which intensifies the heat to allow the "shaping" of metal objects. The larger "flared" cone extension allows for the directed air to be spread and not concentrated.blacksmith tool, tue, bellows, fashioning metal, forge manufacturing process

The Bogong Township (circa 1930s) was constructed by The State Electricity Commission of Victoria as a base camp for construction workers under the Kiewa Hydroelectric Scheme starting in 1938. The Scheme employed 4000 men during its construction phase. A small number were first housed at Bogong Village and when required the Mount Beauty Township was established(1949). Construction at the dams and Power Stations was interrupted during World War II. June 1951 started construction at full pace. The Bogong Township was developed firstly as an accommodation centre (base camp) for construction workers employed under the Kiewa Hydroelectric Scheme. Due to the influx of European workers into the Township the beautification of the immediate surrounds(gardens etc.) had a distinct European flavour. This environment has been very beneficial for tourism in later years. Strict environmental control has not allowed for any extensive redevelopment in tourist accommodation and basically restricted it to the accommodation initially built for the construction workers. Activities such a bike riding, snow skiing, restricted horse riding and bush walking on the Alpine plains and mountains are now a viable part of the Kiewa Valley Tourist Industry.Scanned copy of original black and white photo. Paper manufacturer is Kodak. Paper is Kodak XtraLife II.On reverse side "Kodak ExtaLife II paper"bogong village, bogong township, sec alpine constructions, victorian alpine tourism, winter sports.

This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This handmade tool was made for the particular purpose of joining sheets of metal together. The metal formed in this way could be used for water tanks, boilers and other similar items. It is an example of the equipment made and used in the trades of a metalsmith and blacksmith in the 19th and early 20th centuries.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch

Metal Pully and Rope When heavy items were required to be moved a rope and pulley set was very handy. By attaching one end of the set to a solid surface, it was possible to lift items. In the bush, the timber workers made good use of the pulleys. When set up in a sequence, they could move logs across gullys, up and down hills as the chopped down trees made their way to a sawmill. Using animal or mechanical power increased the use of the pulley and rope. Historic - Industrial - Metal Pulley and RopeMetal Pulley and Ropepuffing billy, metal pulley and rope

Roger de Stoop was born in Flanders, Belgium in 1912 and died in Australia on 18th April 1999. The de Stoop textile factory was closed due to German occupation and when Roger de Stoop received an offer from Australian Dick Best to begin a a partnership in similar venture in Australia, he agreed, bringing looms and skilled workers with him. The company was the first to produce Belgian damask ticking in Australia. The firm was sold to the British firm, Smith and Nephew in 1960.One coloured and one black and white head shot of Roger de Stoop wearing a suit and tie.de stoop, roger. de stoop and best textile factory. belgians in australia

Text and artwork on poster as follows: May Day 1890-1990 (header). Rally with banners: Fascism Means War; REPEAL Anti Union Legislation. 100 Years of struggle for workers' rights and socialism (footer). Names and pictures of four Victorian Union Legends: Tom Mann (London Dockworkers Strike and Victorian PLC Organiser); Vida Goldstein (Suffragist); George Seelaf (AMIEU); and Monty Miller (Eureka Stockade). This poster was a commissioned by Vic Morphy at RedLetter from the artist, Di Wells.Significant to the centenary of May day, activism and workers' rights.Poster - mounted. Colour theme is red, blue and fawn. btlc, ballarat trades hall, ballarat trades and labour council, may day, mann, tom, goldstein, vida, seelaf, george, miller, monty, dockworkers, suffragism, eureka stockade, socialism, fascism, may day, wells, di, redletter

Four photos of Operation Firewood which provided help to widows by supplying and stacking firewood for the winter. Date unknown but was probably early 1990s as the service ended in 1995. 00462.1 A truck parked outside a residence with a human chain unloading firewood. 00462.2 Close up of the human chain of workers 00462.3 Legatee Bill Strachan at the door of truck with a poster saying "Operation Firewood / All vehicles and labour donated to Legacy" 00462.4 Helpers stacking firewood in a residential yard.A record of Legacy helping widows with supplying and stacking firewood. When open fires were the main source of heating a load of firewood, and help moving it, would have been very important to the widowsColour photo x 4 of Legatees delivering firewood.00462.1 Has "8. Operation Firewood" on reverse in black penoperation firewood, widows

Photograph of No. 22 decorated for the Queen's visit (Royal visit) at the depot 7-3-1954. Photos by Wal Jack. Shows the decorations applied to the tram. The first has a depot worker standing in the drivers doorway. Single copy from the Ken Magor collection also held. Printed on Ilford paper. See Reg Item 7878 for a photo of the same tram on the depot access track. See image i2 for rear of photograph. See image i3 for hi res scan of negative Yields information about Bendigo tram 22 decorated for the 1954 visit of Queen Elizabeth IIBlack and White prints contained within the Wal Jack Bendigo and Geelong Album, see Reg Item 5003 for more details.On the rear in blue ink "SEC Bendigo No 22 decorated for Queen's visit, outside depot 7-3-54" with Wal Jack copyright stamp in the top right hand corner and the number "T74PC" written in.trams, tramways, bendigo, royal visit, decorated trams, depot, tram 22

Condensing 100 years of Otway history the author tries to give an insight into the thoughts and ways of the settlers in opening the western Otway Ranges. It gives some indication of the mental pressure, hand-in-hand with the physical stress, as a settler cleared the land and made a living for his family. It covers how the rail link brought in the timber mills and their workers which made timber the main industry of that era, and covers the changes that took place in the 1930s as the mills closed down and the district raised crops, dairying and grazing.The Otways that I knew. Ronald Charles 'Corker' Brown. 1st ed. Corker Brown; np; 1993. 216 p.; illus; maps. Soft cover. ISBN 0 646 16798 7otway ranges; corker brown; otway lighthouse; aborigines; beech forest; farming; grazing; crops; railways; roads; timber;

The queen bee cage is designed to hold a queen bee, and up to three or four escort worker bees. The design allows for adequate ventilation, and has a spot for 'queen candy' -candied honey- to block one end. The queen is placed in her new hive inside the cage, and once the queen candy has been eaten through -allowing her access to the hive- the hive has become accustomed to her smell and accept her. Bees could be sent through the post in this cage.Mesh cage stapled onto top and bottom metal bands. One metal strut running between top and bottom. Base is metal, larger than lid. Lid is wooden, with circular hole.cage, queen, bee, transport, queen bee cage, beechworth honey

Seven coloured photographs of Trieu Duong Tuong: Tuong playing with a pot and drum, a still from the Channel 9 news with Peter Hitchener and Feelix ambassador Sigrid Thornton, Tuong on a swing with an adult, Tuong with a ukele, a close up of Tuong's eyes, Tuong eating and Tuong in Vietname costume walking along St Kilda Road with the aid worker who helped bring him to Australia for the operation to relieve pressure caused by his undiagnosed glaucoma, Kim Thien Truong. Digital Image of framed collage of photographsThis plaque was presented to Vision Australia on October 2, 2011 by Kim's Foundation of Hope Inc. and its supporters for their outstanding dedication in improving the life of Trieu Duong Tuong. Many thanks. Kim's Foundation of Hope Inc. - Vong Tay Nhan Ai.vision australia foundation, children

The interviews were recorded in 2000 by Bronwen Gray and Alan Young for the production of Unreserved, Stories from Truganina Explosives Reserve, animated stories from past residents, workers and interested people of the Reserve (subject to copyright 2004). Cliff Gibson, a Williamstown resident, discusses the handling and shipping of explosives in the Port of Melbourne between 1863 to 1962 and the establishment, development and history of Truganina Explosives Reserve. In the interview he mentions the names of the Lighters and Ships used to transport the explosives to and from the Truganina Explosives Reserve. A primary source of information on memories of the Truganina Explosives Reserve and Altona,Victoriaexplosives, lighter, sailing lighters, the brig martha, deer park, australian chemical company, nobel explosives company, ici, james scott and company, jacks magazine, william wardell, george thomas chirnside, 1897, 1901, pier, bill grant, james mullins, 2 foot gauge tramway, explosives trucks, explosive magazines, railway explosives vans, queen street, richard rendle holten, ports and harbours, the lighter truganina, the lighter george stone, rose, mary jane, tarniet, derrimut, boonah, deutgam, naval dockyards williamstown, charlie curry, powder barges, cargo net, alma doepel, huia, wongalla, joseph sims, argonaut, maryland, pirie, lady isobel, taranui, point wilson, failee, captain dyson, hector pirie

Bumper sticker protesting Victorian Liberal government's widespread privatisation of the public health service (and other public services) in the 1990s, led by Jeff Kennett. which resulted in job cuts and site closures throughout the state. The Australian Nursing Federation, the union representing nurses in Victoria, was a strong opponent of these cuts and closures, that resulted in pressure applied on an already overstretched and poorly resourced group of workers. This sticker was one of many pieces of protest materials and merchandise produced by the Australian Nursing Federation.Rectangular black and white bumper sticker. Sticker printed with 'R.I.P. The HEALTH SYSTEM KILLED by KENNETT' in large font, an illustration of a tombstone and an authorisation statement.nursing, nurses, victoria, jeff kennett, 1990s, stickers, bumper stickers, trade unions, labour history, protest, rationalisation, australia, politics, privatisation, australian nursing federation

Photograph shows the device used to send a "telegraph" signal to the winding or engine house. They were positioned along the track and enabled the tram crew or a cable tram worker to send a signal about the cable. The crew member would set the pointer and depress the trigger. This sent the signal which was recorded on a telegraph tape, indicating the signal and the location of an incident. Installed by the Melbourne Tramway and Omnibus Co. (MTOCo) This photograph is Public Records Office photo H165, 166 and 167 in the Victorian Railways collection.Yields information about the type of equipment the MTOCo used to operate the cable tram system.Set of three Photographs - Black and White of a Melbourne cable tram signalling device.trams, tramways, cable trams, mtoco, signalling, cables, engine houses