These badges or insignia are probably British and belong to artillery and infantry military units but no further information has been found regarding them. They were probably attached to the shoulder pad or other part of the military uniform.These items have no known local provenance but are kept for display purposes..1 A metal badge or piece of insignia with two crossed cannons and a bursting bomb and the number 158 in the centre of the bomb. .2 A metal badge or piece of insignia in the shape of a shield with two crossed cannons, a wheel and flame. There are three metal rings at the back for affixing the item to part of a uniform. .3 A metal badge or piece of insignia with two crossed rifles, a circle with the number 158 and a crown atop. .4 A metal badge or piece of insignia in the form of a shield with two crossed cannons and a bursting bomb. There are three metal rings at the back for attachment to part of a uniform. 158military insignia, history of warrnambool, badges

This perfume bottle has no known local provenance but ones like this would have been common in ladies' bedrooms in the late 19th and early 20th centuries. The use of perfume was important in those days of limited access to bathing facilities. Today more modern versions of perfume bottles are still in use though now they are not such a necessary item.This perfume bottle is retained for display purposes only.This is a small glass bottle with a silver-coloured metal attachment at the top forming a lid and a spray mechanism that includes a metal tube that goes into the bottle. The spray mechanism no longer works. The metal sections are tarnished.vintage accessories, warrnambool history

This badge would have been worn by an A N A (Australian Natives' Association) member in the 1960s or 1970s. The Australian Natives' Association was a benefit association originally founded in 1871 for Australian-born white males. It was historically an influential organization, being a prominent supporter of the White Australia Policy and a campaigner for Federation. It amalgamated with Manchester Unity in 1990 to form the association, Australia Unity. The Warrnambool branch of the Australian Natives' Association, Branch Number 100, was founded in 1889 and was a prominent group in that town/city for many years.The original owner of this badge is unknown but it is retained as a memento of the A.N.A., an important group in Warrnambool for over 100 years. This is a metal badge in the shape of a stylized map of Australia with gold-coloured edgiing. It has a yellow enamel front surface with lettering in gold and black. The back has a metal pin for attachment to a lapel or other item of clothing. A N A australian natives' association, warrnambool history

The Royal Australian Army Nursing Corps (RAANC) is a Corps of the Australian Army. It was formed in February 1951 from the Royal Australian Army Nursing Service. A Corps Badge was introduced in 1951 with the motto Pro Humanitate (for Humanity). It embraces the values of compassion and service to others, reflecting the care and dedication provided to the wounded and sick. Approval for the Corps flag was granted on 7 February 1958. http://en.wikipedia.org/wiki/Royal_Australian_Army_Nursing_CorpsChromed metal Serviette Ring (with Royal Australian Army Nursing Corps. Badge) Royal Australian Army Nursing Corps. Badgeranc, nursing corps.australian army nursing service

This is a document requesting a donation for the Fortuna Pipes and Drums for the update of some of their equipment. The members of the band are shown and named in the accompanying photo. Information about the Fortuna Pipes and Drums is also in Valerie Loyejoy's book " Mapmakers of Fortuna, A History of the Army Survey Regiment" ISBN 0-646-42120-4 and included in the Victorian Collection as item 6000. The Band was originally formed in 1993 from members of the local Masonic Lodge and first played for the Survey Corps Day Parade in 1994 after a request from the then RSM WO1 Phil Meagher. The Army was able to provide the original "Black Watch" tartan kilts. Using an original Survey Corps Badge c. 1915 provided by former WO1 Keith "Aki" Barber, a number of replica metal Survey Corps theodolite badges were struck and used along with the purple Survey Corps lanyard by the band. The Fortuna Pipes and Drums continued to actively support the Army Survey Regiment until its disbandment in 1996.A 4 x Page letter, A4 Pages, Typed document, PhotocopyAddressed to Mr Tony Spurling, Manager Technical Services, Army Svy Regt, Fortunaroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

A copy of the proposal to form the No 44 (Rhodesia) Squadron RAF was sent to F.G. Davey. Davey flew with this squadron during WW2. The proposal gives a brief outline of the squadrons role at the time of the Falklands War and at the time of its disbandment. Davey was not involved with the association as he had passed away in 1975, prior to it being formed. Part of the F.G. Davey Collection. See catalogue no, 3536P for his service record.Two page document on cream coloured paper. Pages are stapled in the top left hand corner with a copper coloured metal staple. Text is printed in black type. Page one had printing on both sides. Page two is a proforma with printing on one side only.no44 (rhodesia) squadron, f.g. davey

Ronald Leslie Gregory (R/22961) served in the Australian Royal Navy. Born 5th August 1921, he enlisted on the 7th March 1939, and served on the HMAS Kuttabul II. He was discharged in 1948. Forms part of a collection of Ronald Leslie's belongings that were donated to the Lara RSL in 2006.RSL membership badge. White background, faded red and blue detailed with rusted metal background. the crown atop the badge has a blue background and says '45' 45 returned sailors, soldiers and airmens imperial australia league B25448 Sydneyworld war two, 1945, rsl, badge

Hexamine stoves, such as this example, were used in the field by soldiers for the preparation of food and boiling of water. The stove would have been fuelled by hexamine tablets, which contain flammable elements of formaldehyde, ammonia, nitrogen oxide and hydrogen cyanide. Associated tablets have been removed from collection as a safety precaution. Due to the fumes of the fuel tablet, food cooked on such a stove would have been sealed in a container when cooking.Silver coloured aluminium hexamine stove. The stove is made of three pieces of metal, the 'floor' and two sides, which form a box when closed and when open appear like an upturned table. The floor of the stove has a series of holes and lines stamped into it. The sides of the stove have been attached to the base with brass rivets. When open, the sides open to form a stand at the base and the interlocking grooves which line the edges of the sides act as a cooking platform on top. When closed, the stove appears as a small box. cooking, vietnam, field, equipment, rations, food, 1960s

This case belonged to Leonard Thomas (VX21070) who was born on 23 Aug 1900 in Cardiff England. By the Second World War, Thomas had emigrated to Australia and was residing in Elwood when he enlisted in Caulfield in 1940. Thomas served during the war as a Private and was discharged on 31 May 1949 from the AIF Mov and Control Group. His full service records are not currently available via the National Archives Australia and so it is unclear whether this case was part of the equipment of his role or a personal item.This case contains a number of inscriptions which may aid researchers to understand the life and movements of the owner, Leonard Thomas. The apparent crest is of special interest, suggesting that Leonard Thomas was connected to equine activities though the unavailability of his service records mean this fact is not confirmed. The item has interpretive potential, to discuss matters of equipment, emigration, use of horses during war and possibly leisure activities if the crest is taken as a reference to polo.Horse shoe shaped case in brown leather constructed of a lid and base. Used for storing shirt collars. Lid and base respectively constructed of two pieces of leather (one top and one edge) which are stitched to heavy card interior lining, mustard yellow in colour. The lid and base are held together by a sewn on leather strip and fastened at the top with a metal buckle; the holed strap through which the buckle attaches has broken. This strap in turn passes vertically down the back of the case and underneath (forming the strip which joins the two halves). Exterior base carries handwritten inscriptions, as does the interior lid. Black ink stamps throughout.Stamps read "L THOMAS" along an upturned horse shoe, underneath which are possibly clubs and an up-facing arrow. Service number written on side of case reads "VX21070". Handwritten inscription reads "Leonard Thomas/33 [illegible three words]/Cardiff/April 20th 1921." Interior of lid reads "LEONARD THOMAS 5-2-20" with a striped triangle below.case, horseshoe, cardiff, england, united kingdom, second world war, elizabeth thomas, world war ii, world war 2, 1940s, emigration

Item was in the collection relating to Leslie Pryde “MM”. Refer Reg No 914 for his service history.A round Commemorative medallion with no individual names etc engraved on. The front shows a relief of an Australian Soldier from shoulder up. Around the edge is "Honor to The AIF". On the reverse at the top are the letters "EVD", in the centre in a scroll form are the words "Gallipoli,France,Palestine". At the bottom around the edge is "Anzac Day 1918". All words in capitals. There is a small loop at the top to attach a chain.circular metal commemorative medallion anzac day 1918, honoring the aif

.1) 6oth Italian Infantry Division, formed in May 1937 in Libya, destroyed in July 1942 near El Alamein..1) Medal, roundish shape, metal with ribbon, green colour and yellow down both sides. .2) Medal, rectangular shape, metal with section of cloth attached. Both have raised depictions..1) “Divisioni Di Fanteria Sabratha (60)” on rear. .2) “fervent Rotae, fervent Animi, Gruppo vignola 1941 1X” on reverse.60th division, italian

Galvanised metal folding stove with numerous ventilation holes. One side folds outwards 90 degrees to form the stove. Hexamine tablets used to fuel.military equipment - army, domestic items - cooking, hexamine, stoves

The Soldier on the badge is apparently VX103098 James Aloysious Canty, enlisted 19/7/1942 in Port Moresby age 29 just prior to Kokoda. He had initially enlisted No V42281. One record has him in E Coy 39th Infantry Batt which was the Machine Gun Coy of the Batt when formed. One record shows him being Taken on the Strength of 7th Machine Gun Batt on 2.11.1942. At discharge on 5.12.1945 he is listed as serving in the 39th Infantry Battalion with the rank of Cpl. The 39th was disbanded in July 1943.Badge, metal, Anzac commemorative. badge is rectangular in shape. Front is gold coloured with "Courage" at the top. Centre is a coloured photo under plastic of a soldier in tin helmet looking up. At base is "Anzac Day April 25 2006. On rear is a pin and clip.badges, anzac day

Metal frame dark brown, glass front, cardboard backing. Black & white photo of 10 soldiers in uniform, 6 standing, 4 kneeling in front of them. Forming H Coy of 7th Battalion. Photo taken with camp tents in background. Names & district of each soldier listed in insert under photo.Under photo are names & district of each member in photograph: “7th Battalion H Company (WWI)” Back Row: “909 B N EDWARDS (Bendigo), 925 PTE J HEUSTON (White Hills) 906 PTE M DOYLE (Eaglehawk), 894 PTE W D CLIFFORD (Kangaroo Flat) 974 PTE W L TUCKER (Huntly), 969 PTE P SOMERSET (White Hills)” Front Row: “890 PTE D CURRIE (Huntly), 913 PTE V E LIASON (White Hills) 896 PTE W CRISFIELD (Corowa) KIA 18.5.19, 934 C REED (Tragowel)”photography-photographs, frame accessories, glass technology, metalcraft, passchendaele barracks trust

One star on the clasp means " One son K.I.A in WWII" This Mothers and Windows Badge was issued to Mrs M Baldwin, the mother of Pte Walter Robert Baldwin who died as a prisoner of war in Burma on the 27th of May 1943. He rests at the Thanbyuzayat Prisoner of War Cemetery, which is in what is now called Myanmar. This is a Death Railway related POW cemetery. Walter Baldwin was born in Mildura on the 12th of May 1921, and prior to enlisting lived at Iron Bark in Bendigo with his parents. He enlisted as No VX55835 in the 2nd AIF on 14.5.1941 in the 2/29th Batt aged 20 years. Embarked for Singapore on 30.7.1941 and disembarked 15.8.1941. He contracted Malaria in a December 1941. Taken POW early 1942 he is listed as died suffering from Cholera on 27.5.1943. “The 2/29th Infantry Battalion was formed at Bonegilla in Victoria in October 1940. It was part of the 8th Division's 27th Brigade, which was the last AIF infantry brigade raised for service during the Second World War.” Badge, metal, "for Australia." Circular section depicting a woman, wreath and an arm. suspended by two rings is a clasp with one star =. Rear has 2 lugs and a pin." issued by C'wlth govt A12229”numismatics - badges - military - army, mothers, widows

See also Cat No No 2348Cap, RAAF grey/blue with gilded white metal Training Corps insignia on left side. Insignia is in form of a circle & bar with an eagle with outstretched wings perched centrally at base of circle. Label inside stamped with details of type & size & handwritten in red ink is owner's name & service no. Black petersham hat band sewn round inner bottom edge.Label: “JAMES, P A, Service No 119699”uniforms - airforce, headwear, forage

.1) Medallion, round, metal silver colour, front has rising sun and crown at top, each side is an Australian sailor and soldier centre is a wreath with "Victory, The Triumph of Liberty and Justice the peace of 1919". Rear has a female form in billowing robe with "Peach 1919 Australia". .2) Medallion, round, metal, gold colour front has a kangaroo with "Anzac Day 1994 commonwealth medallion". Rear has a koala with "Anzac Day 1994 Commemorative Medallion. medallions, anzac, victory

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Document outlines the work students had to do as part of the course which was then titled "Current concepts in Safety" in 1979. This was covered by Dr Eric Wiggleswortjh, who was the Director of Injury Research Project. He was also instrumental in the development of VIOSH. Students had to complete an Assessment Contract covering various aspects of the course material. Extensive list of reading material was provided to select from. This Assessment Contract was to be signed by the student and approved by Eric Wigglesworth. There was a timetable for their tutorial presentation. As Eric states in his letter, "They certainly worked hard in that first year!!!!!!!!!!"Blue-grey folder with loose pages held together with metal slide clip. Cover letter explaining contents. Separate section of papers - bull-dog clip holding them together.Letterhead "Injury Research Project - Dr Eric C Wigglesworth, Director". Signature "Eric"viosh, victorian institute of occupational safety and health, dr eric wigglesworth, director, injury reseach project, occupational hazard management, essay topics, assessment contract, course assessment form

Uniform belonged to Lt. J.K. GRIFFEN 2nd AIF, VX83853, 19th LOC SIGNALS.1) Jacket, Service Dress, Serge, khaki, Winter, 2 x Australia Badges, 2 x Rising Sun Lapel badges, 4 x Lieut badges (2 on each shoulder), 2 x Colour patches rectangular shape, white, light & dark blue with grey surround, 2 x service chevrons on right sleeve (pinned on), 4 x service ribbons WW2, metal buttons, 4 pockets. .2) Trousers, Service Dress, Serge, khaki, winter, plastic buttons, 3 pockets. .3) Peak cap, khaki, with leather band, small Rising Sun badge, grey leather inner lining. .4) Tie, cotton, khaki. .5) Braces - stripped, elastic, leather attachments..3) Inside lining maker appears to be “Tru Form”uniforms - military - army, wwii

Miniature model of a WW2 era Lockheed P-38 Lightning twin engine aircraft mounted on a bakelite base. The aircraft is supported by a central, chromed bullet vertically mounted on the bakelite base to form a stand. The plane and central support have been made from chromed metal materials. The RAAF was equipped with a small number of these aircraft, commencing in 1942, which were used for front line photographic reconnaissance duty. The first version of the Lockheed P-38 was introduced in 1941 by the USA Lockheed aircraft company as a heavy fighter.Nilplane, trench art, p-38, lightning, lockheed, lockheed lightning, souvenir

Made by Cpl. Charlie Dawes 116777 R.A.A.F from parts got while serving at Goodenough and Thursday Isalnds WW2Miniature model of a WW2 era Lockheed P-38 Lightning twin engine aircraft mounted on a trench art ashtray made from various used munitions. This model was made during WW2 by Corporal Cyril 'Charlie' Dawes, RAAF service number 116777, from parts found whilst serving at Goodenough and Thursday Islands in the Torres Strait. The aircraft is supported by a 0.50 inch calibre bullet fixed to the inside of a section of an artillery case which forms the base. The base has three 0.303 inch calibre bullets attached vertically around the circumference and a metal matchbox holder with a RAAF hat badge insignia attached to the front. The items have been made from chromed metal materials. The RAAF was equipped with a small number of these aircraft, commencing in 1942, which were used for front line photographic reconnaissance duty. The first version of the Lockheed P-38 was introduced in 1941 by the USA Lockheed aircraft company as a heavy fighter.RAAF chrome cap badge (WW2 era with the kings crown)plane, trench art, ashtray

Souvenir ashtray made from a metal alloy materaial (probably Aluminium). The ashtray is in the form of a ships wheel and has a central circular insert which is stamped "MV DORSETSHIRE". Stamped with the inscription "MV DORSETSHIRE"

THE JACKET This jacket has been tailored to flatter the wearer’s figure. It also has elements that keep it in good shape and condition, preserve it from soiling and give it a longer life: - the hooks and eyes that join the jacket to the skirt allow the outfit to be made in two pieces but fit close to the body without exposing undergarments - the seams for the metal stays have been cut and stitched to allow maximum movement of the wearer and still keep a trim figure - the discreet breast pocket allows the wearer to keep a handkerchief, coins or other small items close at hand - the lining includes removable padded shields to absorb underarm perspiration - the lining has two cotton loops attached for hanging up to air and freshen it - new cuffs have been attached over the original sleeves that have buttonholes but no buttons. The buttons may have been used to replace missing buttons on the front of the jacket or perhaps to repair worn cuffs The amber coloured satin jacket is fully lined, has turned-back cuffs, a band collar, and looped, coffee-coloured braid trim. A row of closely spaced, round bronze buttons with a floral motif form a decorative closure most of the way down the front of the jacket, below which are metal hooks and eyes that finish at the waist. Underneath the cuffs there is a closely fitted cuff with a row of three button holes but no buttons. The jacket lining has vertical metal stays spaced around the midriff, sides and back. There is an absorbent, removable pad hand-stitched to the underarm section of each sleeve opening. A small satin pocket is stitched discreetly onto the lining above the chest on the right-hand side. There are also two cotton loops sewn onto the lining. Several small metal rings are sewn at intervals around the inside of the waist A satin bow from the same fabric is attached at the centre back of the jacket at waist level. antique satin jacket, colonial evening jacket, ladies evening jacket, 19th century ladies satin jacket, evening outfit

The word “catheter” comes from Greek, meaning “to let or send down.” Catheters were used as early as 3,000 B.C. to relieve painful urinary retention. In those times, many materials were used to form a hollow catheter shape, including straw, rolled up palm leaves, hollow tops of onions, as well as, gold, silver, copper, brass, and lead. Malleable catheters were developed in the 11th century. In time, silver was used as the basis of catheters as it could be bent to any desired shape and was felt to have an antiseptic function. Benjamin Franklin, the inventor and colonial statesman, fashioned silver catheters for use by his older brother John. John suffered from kidney stones and needed to undergo a daily ritual of placing a bulky metal catheter into his bladder. To make these daily requirements on his brother less painful, Franklin worked with his local silversmith on his design for a flexible catheter. "It is as flexible as would be expected in a thing of the kind, and I imagine will readily comply with the turns of the passage," he wrote to John. Holes were bored into the sides of the catheter to allow for drainage. Coudé tip catheters were developed in the 18th and 19th centuries to facilitate male catheterization and continue to be used for this purpose in current medical practice. Catheters made from rubber were developed in the 18th century but were weak at body temperature, leaving debris in the bladder. The advent of rubber vulcanization, by Goodyear in 1844, improved the firmness and durability of the catheter, and allowed for mass production. Latex rubber became available in the 1930s. Dr. Frederic E.B. Foley (a St. Paul urologist) introduced the latex balloon catheter at a urologic meeting in 1935. Though he lost a legal battle with Davol for the patent, this catheter has since been known as the “Foley.” The earliest self-retaining catheters had wing tips (called Malecot) or flexible shoulders (called Pezzer), and were tied to the male penis or sutured to the female labia. Charriere’s French scale was used to describe the external diameter of a catheter. Thus the term “French (Fr)” size was coined. Joseph-Frederic-Benoit Charriere was a 19th century Parisian maker of surgical instruments. A 12 French catheter is approximately 4 mm in external diameter (0.33 mm = 1 French [Fr]). In French-speaking countries, these catheters may be referred to as the Charriere or abbreviated Ch. Catheterization of the bladder was felt to be fairly safe because of the antiseptic principles of Lister (1867). But many physicians continued to be concerned about catheter-related infections as patients were still developing “catheter fever” (systemic infection) despite antiseptic principles. After World War II, Sir Ludwig Guttman introduced the concept of sterile intermittent catheterization in patients with spinal cord injury. For many years, sterile technique was used for catheterization. In 1971, Dr. Jack Lapides of the University of Michigan at Ann Arbor introduced the clean intermittent catheterization (CIC) technique. Dr. Lapides’ theory was that bacteria weren’t the only cause of infection. He believed that chronic stagnant urine residuals and overstretching of the bladder were also responsible. But the fact that CIC was not performed in totally sterile conditions, Dr. Lapides still felt it was superior to indwelling catheters. Initially, Lapides was scorned in the urology world. Three decades after this debate, clean intermittent catheterization remains the preferred method to treat chronic urine retention and neurogenic bladder. Recent regulatory changes have recommended against the reuse of catheters for CIC in an attempt to further reduce the risk of catheter-associated urinary tract infections. https://www.urotoday.com/urinary-catheters-home/history-of-urinary-catheters.html This catheter was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928. Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community. They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine, administration, household equipment and clothing from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Stainless steel catheter with hollow tip from W.R. Angus Collection. Top and end of this instrument screw together. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, department of defence australia, australian army, army uniform, medical treatment, medical history, medical education, catheter

This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch

This food safe is a mass-produced item made for domestic use by Willow Manufacturing in Australia fin the mid-20th century. Willow started a business in 1887 as a metalworking company based in Melbourne Australia, making tinned biscuit and tea canisters. In the First World War, the company began manufacturing armaments and essential packaging for the war effort. In the early 1920s, Willow produced domestic kitchen bakeware such as tin-plated canisters and baking pans labelled with the well-known Willow brand. Other items at this time include billies, boilers, basins and Coolgardie safes. In the late 1950s, the company ventured into plastics production. and in 1965, the name changed to Willow Ware Pty Ltd, to be more closely linked to its Willow brand. Willow Ware is still in business today.The Australian food safe is an example of domestic food storage and preservation in Australian homes from the mid-19th century and early 20th centuries. It is part of the evolution of food preservation methods leading up to our modern electric appliances. The maker, Willow, has a name associated with practical and reliable domestic products.Metal kitchen safe with two shelves, a hinged door and latch and a small swivel wire handle at the top. Painted light green. Airflow holes have been formed in each side panel. Made by Willow, Australia.Marked "Made in Australia" "Willow"flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, food storage, food preservation, willow, willow manufacturing, willow australia, kitchen storage, food care, 19th century, 20th century, willow ware, domestic item, coolgardie meat safe, meat safe, food safe, coolgardie

Scotch hands have also come to be known as butter beaters, butter hands, butter workers or butter pats depending on what part of the world or time period you were in. They are wooden spatulas used when making butter used to press freshly churned butter to remove the watery buttermilk during the butter finishing or working process, also as an aid to distribute salt through the butter. Removing the buttermilk and adding salt helps to prevent rancidity in finished butter, with one side of the paddle ribbed or grooved to allow the buttermilk to drain away from the butter during pressing. The ungrooved side may be used for shaping the butter into its final form. The highest quality Scotch hands are made out of sycamore wood, but they can also be made out of metal.An everyday item in most farm households from the 17th up until the mid 20th centuries significant as it gives a snapshot into the domestic lives of people with farms or small holdings that made their own butter either for sale or for their own use.A pair of Butter Slices (pat) wooden flat with shaped handle. Side for shaping butter is textured Textured with horizontal linesflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, domestic item, butter pats, butter making, dairy item

Golf trophy awarded by the Thomastown Golf Club. Bob Jones was a foundation member of the Club and Secretary for many years.Thomastown Golf Club was a social club formed in 1976. This is part of the Robert (Bob) Jones collection of Club memorabilia.Golf trophy, large metal cup on timber base."Thomastown Golf Club. First player to reach 300 games: Bob Jones, Bacchus Marsh, 04/11/1990. " engraved on plaque.thomastown golf club, golf trophies, bob jones