Owner of uniform unknown.1 Jacket - Polyester, light khaki with belt, metal buckle .2 Jacket - Serge, khaki with belt, metal bucklewwii, uniform

Items issued to Murray Stanley Metherall. Refer 590.2..1) shirt, polyester, khaki, epaulettes .2) tie, woven cotton, khaki .3) tie, woven cotton, khakiuniforms - military, army, costume accessories - male, collar accessories

Vietnam era issue Polyester shirt.Vietnam era long sleeved khaki, 2 breast pockets and 12 plastic buttons.. Class 2 Warrant Officer crowns (brown and cream stitching) on upper sleeves.Class 8405 66-017-2257 Machine washable, do not boil, drip dry, warm iron"uniforms, military, polyesters

Items issued to Wayne Forbes 3176337 1 Field Sqd RAE. Refer Cat 754 for service history also 2586. Ribbons are Vietnam, ICB being Infantry Combat Badge..1) jacket khaki polyester, gold colour metal buttons, lapel buttons, black lanyard, service ribbons and ICB .2) trousers khaki polyester. .3) shirt polyester light khaki colour .4) tie, cotton Kahki colour .5) belt, nylon webbing with silver belt buckles uniforms, service dress, vietnam, icb

Uniform items issued to Quentin Clifford BINKS, V245016 & VX114178 2nd AIF. Refer Cat No 1835 for his service history. .1) Jacket, Service Dress, khaki, summer with 2 x Australia shoulder badges, 2 x Rising Sun lapel badges, 4 x Lieut rank badges ( 2 on each shoulder), 2 x WW2 Service Ribbons, 2 x blue Service Chevrons on right sleeve, metal buttons, 4 pockets. .2) Trousers, Service Dress, khaki, summer, 3 pockets. .3) Shirt, polyester, khaki, long sleeves. .4) Tie, cotton, khaki. .5) Belt, Sam Brown, brown leather, waist and shoulder belts. .6) Braces, clear plastic..1) “Wardrop, My Tailor of Melbourne, Collingwood and Geelong for all men’s wear” .2) “Wardrop of Melbourne, Collingwood and Geelong, approved Military Tailors” Under in ink “Lieut Binks Dec 1942” .3) “ADF 1989” uniform - army - male, costume - male, costume accessories - male

Uniform belonging to E.R. FORREST, RAN Technician Refer also Cat. 348.2 & 349.5.1) Jacket, polyester, white, service insignia blue P above a propeller on right sleeve, "AUSTRALIA" on upper sleeves. .2) Trousers, polyester, white, "AUSTRALIA" on upper sleeves. .3) Shirt, polyester, white. .4) Navy bib attachment, polyester, navy with white strips. .5) Lanyard and ribbon, white rope, navy ribbon.uniform - navy, costume - male, costume accessories - male

RAAF "All Seasons" 1972 uniform replaced the old dark navy blue Uniform belonged to Flight Sgt. D. Bending All Seasons Uniform .1) Jacket - Cotton, blue, 4 large gold metal buttons, 2 small gold metal buttons, metal crown and eagle badges on both collar lapel, service ribbons, rank insignia, "ROYAL AUSTRALIAN AIR FORCE", embroidered crown and 3 chevrons on upper sleeves. .2) Trousers - Cotton, blue .3) Shirt - Polyester, light blue, epaulettes with AUSTRALIA embroidered, crown and chevrons, service ribbons .4) Tie - Polyester, navy blue .5) Belt - Polyester, blackuniforms - military, airforce

This uniform belongs to RAAF Squadron Leader John Haines. The decoration and campaign medals are the Australian Service Medal, Defence Force Service Medal, RAAF Long Service Medals and the UNEF II (Egypt and Israel)John Haines was the President of the Eltham RSL. At a later date he served on the Montmorency RSL.Squadron Leader’s Service Dress Jacket made of blue wool polyester blend with a blue rayon lining. At the top of each sleeve there is a woven insignia of the Royal Australian Air force. It has 4 larger gold RAAF buttons and 2 smaller gold buttons on the front chest pockets. The jacket has two pockets on the lower half of the jacket. On each lower sleeve there is a Squadron Leaders rank insignia. Above the right pocket there is silver name tag. Above the left pocket there is a ribbon of campaign medals.Silver badge with the name “Haines” Ribbon markings from left to right Australian Service Medal, Defence Force Service Medal, RAAF Long Service Medal, UNEF II (Egypt and Israel)raaf, john haines, squadron leader

This is a complete uniform of the Warrnambool Urban Fire Brigade in the mid 20th century. The Warrnambool Fire Brigade, located today in Mortlake Road, Warrnambool, was established in 1863. The formation was prompted by a fire at the Flying Buck Hotel in Liebig Street. The Warrnambool Fire Brigade has a long proud history of service to the people of Warrnambool and district for over 150 years. The uniform belonged to John (Jack) Sizeland, a firefighter for over 37 years. He retired in 1977. This uniform is of some significance as it shows the type of uniform worn by Warrnambool firefighters in the mid 20th century. It is also of importance because it belonged to a local firefighter, Jack Sizeland. This is a Warrnambool Fire Brigade uniform consisting of:- .1 A black cloth single-breasted jacket lined with black and white material. It has four silver metal buttons down the front and two on the top pocket lapels. The buttons have the inscription ‘Country Fire Authority Victoria’. There are two red and black cloth tabs stitched on the top of the sleeves (‘Warrnambool Urban Fire Brigade’). The belt is stitched at the back and loose at the front. .2 Black cloth trousers with a red braid stripe down each leg. .3 Black leather belt with a silver-coloured buckle. .4 Black officer-type hat with red plastic lining, a plastic peaked front with a green backing, a red and black braid around the rim with two metal buttons and a silver-coloured metal badge of the Country Fire Authority. .5 Black cloth (polyester) tie with orange lining. Trousers: ‘C.F.A., I. L. Wise’ Tie: ‘Mark Andrew Made in Australia’ Hat: ‘Emerco, Melbourne, Registered Trademark, This is Your Guarantee for Quality, Made in Australia’ warrnambool fire brigade, jack sizeland, history of warrnambool

This uniform was worn by Bernie Farley, present secretary of Warrnambool RSL (2019). The uniform was made by Fletcher Jones & Staff, Warrnambool in 1998.Jacket with four pockets each with metal button fasteners. Four front metal button fasteners. One inside pocket . Regimental badges on lapels, Badge over right pocket. Epaulets with metal buttons, a crown and Australia. All metal buttons engraved with army insignia. Front metal button fasteners secured with safety pinsTag inside (left) FLETCHER JONES VICTORIA 1998 Arrow signifying govt. NAME. SERVICE NUMBER. 70% Wool, 30% Polyester, DRY CLEAN ONLY (A) Warm Iron ZC804B AR0003army uniform, military uniform, warrnambool ex service

Worn as part of a uniform, by Bernie Farley, of the 8th/7th Battalion, Royal Victorian Regiment. This tie has social significance, being owned and worn by Secretary of the Warrnambool RSL, Bernie Farley. The tie was donated as part of a uniform set by Bernie Farley after 30 years of service in both the Australian Army and Royal Australian Air Force. Though worn in the 1990s, this uniform is in excellent condition as a representative example of an Army uniform of the period.Khaki tie with silk lining; tag attached to the reverse of the tie in the first quarter of the tie lenth. Label is sewn into seam on reverse. Label reads "AUSTRALIAN TIE CO./MADE IN AUSTRALIA", "65% POLYESTER/35% VISCOSE/MADE IN/AUSTRALIA", "DRY CLEAN/ONLY P50 [degree]/WARM IRON/USING INSERT."military uniform, ex-service, army uniform, warrnambool, tie, neck tie

Khaki trousers with two side pockets and one back pocket. Tag - FLETCHER JONES VICTORIA 1998 ARROW indicating Govt. NSN 8405-66-139-0872 NAME. SERVICE NO. 70% Wool 30% Polyester 30% DRY CLEAN ONLY(A) Press on original creases. Use damp cloth. Warm iron

This uniform was worn by Bernie Farley, present secretary of Warrnambool RSL (2019), during service with the 8th/7th Battalion, Royal Victorian Regiment.Short sleeve Khaki shirt, two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a khaki coloured plastic button. Seven button fasteners down the centre front. Patch on left shoulder with rising sun, crown and cross.Printed on tag at interior near collar, "ADA/ [arrow motif]/2910002/OCT 2000/NSN: 8405 66 133 5956/ SIZE: 41/NAME/Service No/65% POLYESTER/35% COTTON/MADE IN AUSTRALIA" Patch on left shoulder reads "THE AUSTRALIAN ARMY".army uniform, military uniform, warrnambool ex service, australian defence apparel

This item of uniform was own, worn and donated by Major (Retd) Bernard Farley during service in the Army Reserve Infantry at 8/7 Royal Victoria Regiment (RVR) Ballarat VICPolyester trousers with two side pockets, one back pocket, money pocket with belt loops and brass ceremonial belt keepersTag - A.D.I. P/L VIC 1989 ARROW indicating Govt. NSN 8405-66-0185-5522 MACQUARIE 89, Batch C Size. 80RF W.90 L.77 NAME. SERVICE NO. DRY CLEAN ONLY(A) Press on original creases. Use damp cloth. Medium to hot steam iron

This jacket is part of the dress uniform of a Major in the Army Reserve. Major Bernard Farley who owned this jacket wore it to official functions in the Mess dining room. He served in this capacity from 1998-2001.Bernard also served in the RAAF for a number of years.This jacket has significance as it is typical of dress requirements which were worn to official Army functions.Short white jacket with wide front lapels epaulets at the shoulders and a small V shaped downward peak at the back. The sleeves have a stitched over section at the cuff with a point in line with the shoulder. On each epaulet from the collar edge side there is a brass coloured button with the Rising Sun in low relief and on the lower edge of the epaulet a brass coloured crown with red nsert and a circular shaped badge with the word Australia. There is a badge on each lapel two crossed rifles holding a crown in brass colour over the top of a silver VLabel states ,' Fetcher Jones Victoria 1998 NSN 8405-NIC Name....... Service No......... Polyester / Viscose Dry Cleanable ( A) Warm Gentle Machine Wash Rinse well. Warm iron. ZC785 BR1689 425267911.ZC785 107 R 347 044 05037649 cloth br 1689 17. J10129 OW Wwarrnambool, army reserve, dress jacket

This jacket is part of the dress uniform of a Major in the Army Reserve. Major Bernard Farley who owned this jacket wore it to official functions in the Mess dining room. He served in this capacity from 1998-2001. Bernard also served in the RAAF for a number of years.These trousers are part of the dress uniform of a Major in the Army Reserve. Major Bernard Farley, who owned the uniform, wore it to official functions in the Mess dining room. He served in this capacity from 1998-2001. Bernard also served in the RAAF for a number of years.Long black trousers with a single red stripe running down either side from the top of the waistband to the base of the legs. There are two pockets just eunderneath the waistband on either side of the trousers. The fabric frms two stiff peaks at the centre of the back of the waistband. The trousers have a black zip with a metallic clip just above and six black plastic buttons along the interior of the waistband. There is one white square label with inscriptions attached to the back/left of the interior section of the waistband. Directly underneath this is another rectangular white label of the same length however much shorter. This also has inscriptions.Inscriptions on the larger square label: Fletcher Jones / Victoria / 1998 / NSN: 8405-66-095-9737 / NAME........... / SERVICE NO............ / 70% Wool / 30% Polyester / DRY CLEAN ONLY (A) / Press on original creases. Use damp cloth. Medium to hot iron / ZT782 AR0009 Inscriptions on the smaller rectangular label: 425267283.ZT782G / 94-92-76 / 347 044 07063222 / CLOTH / AR0009 / . . 5 . D40. 5 / J10066. . W *army reserve, dress uniform, dress trousers, trousers, army uniform, uniform, bernard farley, farley, warrnambool rsl, warrnambool

This hat is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) hat in Airforce colours of blue and grey in camouflage pattern. Broad brim hat with black plastic cord end fastener on a blue cotton cord. Plastic tag on interior of hat lining with printed inscriptions.Inscription on tag: “Hard Yakka/AUSTRALIA/AUGUST 2015/PO No: CC2XZ8/LAY No: 10609/SQNCOR FARLEY/(broad arrow)/[Mobile Phone Number]/NSN: 8415-66-161-4051/SIZE: M 56cm/NAME:” Inscription on reverse of tag: “PM KEYS No:/75% COTTON/25% POLYESTER/CARE INSTRUCTIONS/HAND WASH IN COLD/WATER WITH MILD/DETERGENT RISE/WELL DO NOT WRING/TUMBLE DRY OR/DRYCLEAN (X)/DRIP DRY IN SHADE”camouflage, airforce, uniform, general purpose uniform, australian defence force

These trousers are part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) trousers in Airforce colours of blue and grey in camouflage pattern. Long pants with elasticised drawstring fastener at ankle and velcro adjustment fasteners at the waist. Pants take a straight leg style and bears several pockets: two thigh level pockets with zippered horizontal opening, two open hip pockets on the front, one open pocket on the reverse right hand side with blue plastic button fastener. Five large belt loops encircle the waist and there is a zippered fly, secured at the top with a blue plastic button.Label on interior front right of trousers reads: “A193/ADA/MADE IN AUSTRALIA/JUL 2015/ PO: CC2X91/NSN: 8415 66 161 4017/SIZE: 95 R/(broad arrow)/NAME:............/PM KEYS NO:............./75% COTTON 25% POLYESTER/WARM MACHINE WASH 40*C/RINSE WELL, WARM IRON/DO NOT IRON OVER HOOK AND PILE/DO NOT BLEACH/DO NOT STARCH/MAY BE TUMBLE DRY 40*C/DRYCLEANABLE (P)”camouflage, general purpose uniform, airforce, uniform, australian defence force

These trousers are part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Disruptive Pattern trousers in five colours of green and brown. Long pants with elasticised drawstring fastener at ankle and velcro adjustment fasteners at the waist. Pants take a straight leg style and bears several pockets: two thigh level pockets with zippered horizontal opening, two open hip pockets on the front, one open pocket on the reverse right hand side with blue plastic button fastener. Five large belt loops encircle the waist and there is a zippered fly, secured at the top with a blue plastic button.Label on interior front right of trousers reads: “A13/ADA/VICTORIA 2008/(broad arrow)/SPECIFICATION ARMY (AUST)6542/NSN: 8415 66 152 1059/SIZE: 95 S/NAME/SERVICE NO/75% COTTON 25% POLYESTER/WARM MACHINE WASH 40*C/RINSE WELL, WARM IRON/DO NOT IRON OVER HOOK AND PILE/DO NOT BLEACH/DO NOT STARCH/MAY BE TUMBLE DRY 40*C/MADE IN AUSTRALIA” The name “FARLEY” is also handwritten on the back interior waist band of the trousers. camouflage, general purpose uniform, airforce, uniform, australian defence force

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Working Dress (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The short waist length jacket consists of a jacket has a lapel collar and zip front, with two external chest pockets and exposed pocket flaps, There are portlets on each shoulder that are fastened with a black plastic button. This button has a crown over eagle in flight on the front. Rank slides are slid onto these portlets and this jacket has Squadron Leader rank slides on the portlets. is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. The waist belt is part knitted on the sides and cloth on the front and rear. There is also one interior pocket on the right side below the exterior breast pocket. Maker: Australian Defence Industries The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) trousers- Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Defence Industries

Issued to Aircraftsman Bernard Farley in 1976 as part of his initial issue of uniform on joining the Permanent Air ForceThis item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Peaked Hat - Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Government Clothing Factory

This nurse's uniform (probably a Nurse's Aid uniform) was used at the Ballarat Base hospital.This nurses uniform comprises a mauve princess style dress with short sleeves, a front zipper, side pockets and white piping around the collar, sleeve cuff and pocket trim. The back has a yoke and a pleat on either side for comfort. It is made of polyester and cotton blend.Written in black maker - B.H. Written in black marker on a cotton tape - J. Dobbinnurse, uniform, ballarat base hospital, nurse's aid, nursing, school of nursing, costume, textiles

This was a School of Mines Ballarat tie. The School of Mines was established in 1870, making it Australia's third oldest tertiary institution. The School of Mines had two divisions - a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying. The organisation remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. These three green polyester ties have a small SMB crest set within two gold diagonal pin stripes (5cm apart) in the middle of the wider front and one on the narrower end. (Men's polyester tie made In Australia under licence By Hollygreen) On a label tag at the back - Hollygreen, 100% polyester, Dry clean only, Made in Australiasmb, school of mines ballarat, school tie, costume, textiles, uniform

This gown was worn by Shirley Falkinder (nee Ogden). She was the principal nurse educator and lecturer at the Ballarat Base Hospital from 1973-1985 when nurse education was hospital based. She was seconded to prepare the Accreditation document for a three year "Diploma of Applied Nursing", which commenced at the Ballarat College of Advanced Education in 1986 and she retired in 1989. Shirley continued her interest in the education of nurses and became the Vice President of the Ballarat University College Council in 1990 and President in 1991.A black polyester and wood academic gown with a wide red (edged with white) silk lapel. Across the shoulders and below the back yoke there are padded pin tucks which form gathers. The long sleeves reach to within 8 cm of the hemline of the garment. They are slit below the armpit on the front side for the arm to go through and the rest of the sleeve falls open below.Makers woven patch - R.W. Bredin & Son, Melbourne Australia, Academic, Legal & Civic Robe Makersshirley falkinder, shirley ogden, academic gown, ballarat base hospital, ballarat university college, ballarat college of advanced education, costume, uniform, graduation, academic gown, textiles

These ties were made as merchandise for the University of Ballarat in the early 2000s..1) & .3) A cream box with University of Ballarat and the Emblem printed in red. Inside is a polyester black tie woven with a small diagonal band of three stripes (top is blue, middle is gold and bottom is red) and a small emblem of the University of Ballarat on the right side. It has a navy blue lining. .2) A cream box with University of Ballarat and the Emblem printed in red. Inside is a multi-striped silk and polyester red, blue, gold and black tie with heraldic device of the University of Ballarat on the right bottom corner. It has a black lining..2) woven - University of Ballaratuniversity of ballarat, ties, merchandise, costume, uniform, textiles

Khaki Polyester shirt with WO1 badgesuniform, 1980, army