Donated by Box Hill Historical SocietyGold coloured tin. A crown in red and gold on the top with a scroll with 'Semper Fidelis' printed on it. An oval shape below scroll outlined in gold with 'WINFRED' 'London' and 'Superior cigarettes'/ Inside on lid 'WINFRED' cigarettes printed within a scrolled outline. Below is printed ARDATH TOBACCO Co LONDON ENGLAND.containers, domestic

The Kangaroo Hoppet is Australia’s premier long distance cross country ski race, and a member of the Worldloppet series of international cross country ski events. The first race at Falls Creek was held in 1979 under the name of “Australian Birkebeiner”. It was a 21km race with about 80 participants organised by the Birkebeiner Nordic Ski Club of Mount Beauty. The course started and finished at Falls Creek Alpine Resort and took participants out into the Bogong High Plains. After running the event for 10 years, it was decided they should become part of the Worldloppet series of marathon ski races. Representatives from the Birkebeiner Nordic Ski Club and the Australian Ski Federation attended the Worldloppet Annual Meeting in Finland in June 1990 to put the case for the acceptance of an Australian event into the Worldloppet series. Before being admitted, they had to demonstrate that the Birkebeiner Club could run a world class event, so three months later in August 1990 a 42km event named the Australian International Ski Marathon was held at Falls Creek together with a 21km Birkebeiner race and a 7km event called the Birkebeiner Lite. The event was approved by delegates from USA, Norway and Austria, in 1991 Australia became the 12th member of Worldloppet, with the condition that there had to be a name change. After some late night discussion allegedly involving red wine from North East Victoria the main event became the 42km Kangaroo Hoppet, with the minor events being the 21km Australian Birkebeiner, and 7km Joey Hoppet. In the winter of 1991, the first Kangaroo Hoppet was held. It was a great success and has been a regular fixture on the international ski calendar ever since. It features the main 42km event as well as a 21km event and a 7km event. The Hoppet brings the Australian snowfields to an international audience. In 2015 the Men's Winner was Valerio Leccardi from Switzerland in a time of 01:31:10.910. The winner of the Women's event was Maria Graefnings of Sweden in a time of 01:39:05.63. Due to the thick fog and extremely poor visibility, the course was shortened to two 18km laps to avoid the open areas of the Park and Heathy Spur.This poster is significant because it documents an event which brings international attention to Falls Creek and the surrounding region.A poster featuring a diamond pattern containing images of skiers. The date of the event is contained in two linked diamonds in the top right hand corner. Logos of AGL, Falls Creek All Season Alpine Resort, Alpine Shire, Tourism Victoria, Parks Victoria and the Birkebeiner Nordic Ski Club are across the bottom of the poster.Top Right: Saturday 22 August 2015 CELEBRATING 25 YEARS Within the diamond shapes: 7 km - 21km - 42 km FALLS CREEK AUSTRALIA KANGAROO HOPPET Below the skier: www.hoppet.com.au kangaroo hoppet, worldloppet events, falls creek, mt. beauty

WAR Chiselett PTY LTD produces ginger beer in its Merbein's factory.small bottle with two colours brown and dark creamy colour at bottomGINGER BEER Heart shape insignia with bunch of grapes in the center: MERBEIN CORDIAL WORKS written around the heart and TRADE MARK near grapes W.A.R. CHISELETT PTY LTD written under heart ginger beer, cordial, war chiselett, merbein

Adzes are used for smoothing or carving wood in hand woodworking. It is similar to an axe but with the cutting edge perpendicular to the handle. It is used chiefly for shaping wood.A square ended adze that has a thin arched blade set at right angles to the wooden handle. The handle is not original.wood-working-tool adze carpentry

Sovereign cases were small portable boxes usually in cylindrical shape and made from various metals with snapshut covers to contain the coin. A white metal Sovereign coin holder with spring-loaded insert with engraved decoration on lidengraved decoration on lidpersonal effects, coins, early settlers, market gardeners, moorabbin, bentleigh, ormond

This darning egg is a plastic egg-shaped object, designed to be inserted into the toe or heel of the sock to hold it in the proper shape and provide a foundation for repairs.Two-tone moulded plastic darning egg.household equipment, darning eggs

Butter pats were common from about 1850 - 1920. They were used to shape the butter into pieces instead of by hand as the butter was soft.Two vintage wooden butter pats, one pale wood with a shaped handle, the other is a dark piece of wood without a handle. Both have ribs on one side for the butter to be shaped.butter, butter pats, kitchen equipment

Each plaque has 4 names on being the winning team for that year. The plaques start 1971 and the last 1981. The Bendigo RSL Sub Branch conducted a Diggers Day Bowls as far back as 1953.Trophy, brown wood rectangular base shape with 3 pillars on top of metallic construction, all are round shape, 2 have a depiction of a bird on top with outstretched wings, the centre shorter one has a depiction of a man playing bowls. The base has a central plaque with a wreath around engraved in the middle. On the left of the base are 10 x small plaques engraved with names on, 1 x small plaque on the right of the base.On centre plaque, "Presented by R.H. Trethewey MLA - Perpetual Trophy - Diggers Day Tournament". Example plaque, "1977 - H. Tobin - W. Smith - P. Weymouth - J. Cruse"brsl, smirsl, diggers day, bowls

The Mount Beauty Senior Citizens' Clubrooms were officially opened on the 8th December 1972.The building was built and owned by the (then) Bright Shire after much lobbying and fund raising by a local steering committee. It has served the community well for over 50 years.This album is a significant reminder of how the community of Mount Beauty was always pro-active in the development of community welfare and assets.Orange Vinyl covered photo album circa 1960s-1970s. Inside the covers are 10 double-sided plastic-covered cardboard pages secured by a metal spirex type page holder. Two gold lines with geometric cornice design border the cover. Four snowflake shapes form a diamond shape embossing in the centre of the cover also in gold. Manfacturer -Advance - Style 101220 inside back cover in gold.mt beauty senior citizens club

Clothing. Curved ''cup-shape'' bodice, unlined, shirred slightly at the centre, and measuring 28 cm deep, from shoulder strap to midriff. A V shaped panel is inserted into the back bodice - 37 cm x 13.5 cm at the top to give a filled effect. Eight covered buttons and loops form the closure at the top of this panel (one button missing). A triangular shape is also sewn into the lower skirt to give flair.costume, female, slim black velvet evening gown

Clothing. A cardboard horseshoe shape, covered in 1.3 cm wide cream textured ribbon. Ribbon is wound round the shape and stitched into position at the open ends of the horseshoe. A small sprig of waxed orange blossom, four buds, and two leaves decorate the horseshoe at the top. A 34.5 cms long loop is attached under the orange blossom, to hang from the bride's arm. this loop is fastened with a bow, just above the horse-shoe.costume, female, wedding horse shoe

Worn for wedding of donor's mother on 26 September 1936. Eric Edward Pearce to Jean Isabelle Mansell at Presbyterian Church, Shepparton, Vic.1936 Cream satin dress with a V neck with pintucking featuring a diamond shape in centre front, also pintucked. Full length full sleeves with cuffs with two buttons and loops. Belt from diamond shaping to centre back panel. Panel opens out to train.|Marriage of Eric Edward Pearce to Jean Isabell Mansell. 26 September 1936 NO3222 Certificate|Wedding photo NP2391|Cake Photo NP2392costume, female ceremonial

This butter cooler was used in households to prevent butter from melting in the warmer weather. Ice would have been used in the butter container. The top of the container is domed, indicating the shape of the butter at that time (late 19th century). This butter cooler would have been a costly item and would have graced the dining table of a family that had considerable means. It would have been used on a dining table even after the invention of refrigeration in the 1880s as the eating rooms would have had little or no cooling mechanisms in the late 19th and early 20th centuries. This butter cooler has no known local provenance but it is a very attractive item and is retained as a good example of a household item no longer in use. It will be very useful for display.This is a silver butter cooler with a circular base with an ornamented edge. The base has a stem holding two highly ornamented arms branching out from the sides. These arms hold an oval container which has a chased silver base and an overhanging chased silver top. Inside the container is the space to hold ice or cold water. On top of the inside of the container sits a small round lid which holds the butter and the ice. The lid has several small holes for the ice water to drain underneath. The base of this lid is impressed with moulded fruit and leaves. The oval container has an over-arching handle attached. This is highly ornamented in fretwork. The sides of the container have two projecting pieces for holding the butter cooler and two other smaller projecting pieces with chains attached for hanging the object. One of these pieces has an oval holder for turning the hinged top of the container to close the container. This top has a chased silver patterning on its top. When the lid is closed the container adapts to a globe or egg shape.‘Made and Guaranteed by Meriden B. Company 5085 U.S.A. household items, history of warrnambool, silver butter cooler

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, distant signal, signal, maritime signal, ball signal, signal shape, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Cone, part of a Flagstaff signal set. A woven cane cone, painted black, with a metal rod passing through the centre and two crossed metal bars at the base. The central rod has a loop at the top and passes through the bars at the base, finishing in a metal loop. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal cone, day signal cone, cone signal, cone day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal ball, day signal ball, ball signal, ball day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Cone, part of a Flagstaff signal set. A woven cane cone, painted black, with a metal rod passing through the centre and two crossed metal bars at the base. The central rod has a loop at the top and passes through the bars at the base, finishing in a metal loop. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal cone, day signal cone, cone signal, cone day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.distant signal, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

A wax matches' box in the shape of an egg on a mall pedestal. It is made of carved wood and painted red, green and black in a tartan design. It has gold dots down the side and on the base.vestra matchbox smoking personal-effects container

The tipstaff is a symbol of office for the court officical responsible for keeping order in the court, also called the tipstaff. This tipstaff dates from 1826 and is marked with the reign of George IV. This tipstaff was unlikely to have been used in the Supreme Court of Victoria, and is probably an item donated to the court in the 20th century.This is the only item of this nature held by the court, the item because of its age would be quite rare. This rarity makes it of state significance, further research needs to be undertaken with regard to national and international (ie. UK) significance.Painted black wooden baton, with gold leaf inscription. Baton has been shaped to provide a hand grip with three wooden grooves, barrel/cylinder shape at the other end.Painted "Gold Crown/1826/ GR IV/ R. 11"tipstaff, tipstaves, courts, judiciary, wood, supreme court melbourne

Issued to Sergeant Robert G. Jackson posted to Butterworth, Malaysia from 1966-69 as part of field First Aid Kit.Packet in brown in rectangular cubed shape. White paper wrapped around with description of contents written in dark blue writing. Contents of packet one ounce of compressed cotton wool.Written on end and one side "Compressed absorbent cotton wool - 1 ounce"butterworth, medical equipment

Glass bottle - torpedo shape, oval shaped, with painted base and narrow neck. Green coloured glass. Bottle to be stored on its side. Information - markings on side of bottle. British.Information on bottle - "THE PROPERTY OF THE 107th REGIMENT". containers, glass, britain, 107th regiment

The New Zealand College Rifles was formed in 1897 from three Colleges in Auckland as a Cadet Military Unit, members served in South Africa, WW1 & 2. Item in the collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service details.Badge pressed brass, top has a crown with date under over star style shape with central motiff, scroll at bottom with raised lettering, rear has three lugs.On face, "1897, College Rifles Auckland"badges, aucland, nz, cadets

In the 1950s and 60s what we know as netball today was played by women and was known as basketball. No information has been found on this Warrnambool Basketball Association but it is most probable, however, that it was an early organization of men’s basketball teams. The game of basketball, founded in America, has become much more popular in Australia for both men and women in the last three or four decades with the local organization in Warrnambool known as Warrnambool Basketball Inc. and the teams Warrnambool Seahawks and Mermaids playing in a state-wide competition. This badge is retained for display purposes as an example of a sporting badge from the mid 20th century.This is a metal badge in the shape of a shield with gold lettering on a brown background and gold-coloured images of a net and ball on a green background. It has a metal ring at the top for attachment to a ribbon or cord.Warrnambool Amateur Basketball Associationwarrnambool basketball, warrnambool netball, history of warrnambool

This fire extinguisher was used for commercial purposes in the Nullawarre Post office. The item was made in England by the Pyrene Co Ltd (1914-1971), one of the world’s leading manufacturers of fire fighting equipment in the early to mid 20th century. The extinguisher had a pump action and probably contained carbon tetrachloride. Nullawarre is a small agricultural settlement 25 kilometres south east of Warrnambool. The Nullawarre area was settled in the late 1860s and 1870s and today has a store and Post Office and a school. Charles Williams was the Post Master at Nullawarre in the early to mid 20th century and also delivered the mail. His wife, Vida was the Post Mistress. This fire extinguisher is of interest firstly as an example of a common item used commercially in the past and secondly as an item that came from the Nullawarre Post Office, used in this commercial building in the early to mid 20th century. This is a metal fire extinguisher which has been painted but the paint is mostly worn away. It is cylindrical in shape with ridged areas at the base and top. It has a clip handle. The cylinder is empty.‘Pyrene’vintage fire extinguishers, nullawarre post office, warrnambool

Items souvenired by Alan Mason, refer cat No 3979.2.1).2) Currency Malayan, “One Dollar”, rectangular shape, blue, white and light brown colours, photo inset of the King on right hand side, note s dated..1) “G (over) 5 074883” .2) “G (over 5) 074884”currency, malayan, one dollar