The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 29 NQR - Open Medium Truck with drop ends VR Service History 15/12/1898 NWS Built new *NQR 29.VA - 15/12/1898 NWS Built new - / /1926 - To NQ 29.VA - NQ 29.VA - /10/1954 - Sold (to) - Puffing Billy Service History or Notes July 2016 - LiftedHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck with drop ends29 NQR narrow gauge Open Medium Truck with drop ends made of Steel and metal 29NQRpuffing billy railway, pbr, rolling stock , 29 nqr, narrow gauge rolling stock, victorian railways, nqr wagon

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 151 NQR - Open Medium Truck 24/ 9/1910 NWS Built new VR Service History *NQR 151.VA - 24/ 9/1910 NWS Built new - / /1926 - To NQ 151.VA - NQ 151.VA - circa 1965 - To NQR 151.PA (v) NQR 151.PA - / /1974 BEL Photograph #217.12: loaded firewood Puffing Billy Service History or Notes Untrafficable at Emerald has 6 NB sitting on it Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck151 NQR - Open Medium Truck made of Steel and metal151 NQRpuffing billy railway, pbr, rolling stock , 151 nqr - open medium truck, victorian railways, nqr - open medium truck

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 23 NQR - Open Medium Truck VR Service History - NQR 23.VA - 10/12/1898 NWS Built new - / /1926 - To NQ 23 Puffing Billy Service History or Notes Untrafficable at Emerald Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck 23 NQR - NQR at Emerald - Open Medium Truck made of Steel and metal23 NQR puffing billy railway, pbr, rolling stock , ? nqr - open medium truck, narrow gauge rolling stock, nqr wagon, 23 nqr, victorian railways

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 203 NQR at Clematis - Open Medium Truck 203 NQR - Open Medium Truck (11) VR Service History - NQR 203.VA - 5/12/1913 NWS Built new - / /1926 - To NQ 203.VA - NQ 203.VA - / /1973 NWS Stored minus bogies, NR4/73 Puffing Billy Service History or Notes Untrafficable at ClematisHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck 203 NQR at Clematis - Open Medium Truck made of Steel and metal203 NQRpuffing billy railway, pbr, rolling stock , ? nqr - open medium truck, victorian railways

Two copies of the Bendigo Sub-branch R.S.S.A.I.L.A. Annual R.S.L. Ball held at the Town Hall, Bendigo on 18th August 1954. Guests of Honour were His Excellency General Sir Dallas Brooks, K.C.B., K.C.M.G., K.C.V.O., D.S.O., K.ST.J., and Lady Brooks. Card is cream with gold print on the front and a gold RLS badge. Other printing is blue. The inside of the tri-fold card has a Dance Program of 28 dances and a space for Autographs. The other side has the Debutantes: Gwen Baxter, Joy Quinn, Patsy Kane, Mavis Grenfell, Della Grainger, June Anstee, Margaret Williamson, Beverley Mildren, Doreen Birch, Dawn Weston, Mavis Chambers, Jill Smith, Marlene Doble, Myrtle Hassett, Jennifer Mahoney, Barbara Lazenby, Joan Taylor, Elaine Escon, Wilma Adams and Judith Edgar. Trained by Mr Albert Osborn. Chaperone: Mrs L J Warner. Partners: Ernest Johnson, Stanley Quinn, Mervyn Hall, Norman Grenfell, John Craig, Kevin Anstee, Harold Button, Wesley Pearce, Noel Fields, Haydon Mathers, Ian Morris, Kevin Herdman, Graeme Elvey, Neil Holden, Grenville Tonzing, Kenneth Cruse, Jim Thomas, Keith Kelly, Leo Janssen and Ian Hughes. President Bendigo Branch R.S.L: Col. Sir George Lansell, K.B., C.M.G., V.D. Secretary Ball Committee: Mr G F Osborne. M.C. Mr G Hudson. Printed by Hocking & Sloan Print, Bendigo.Hosking & Sloan Print, Bendigoevent, social, annual ball, r.s.l. bendigo collection - annual r.s.l. ball 1954, his excellency general sir dallas brooks, lady brooks, gwen baxter, joy quinn, patsy kane, mavis grenfell, della grainger, june anstee, margaret williamson, beverley mildren, doreen birch, dawn weston, mavis chambers, jill smith, marlene doble, myrtle hassett, jennifer mahoney, barbara lazenby, joan taylor, elaine escon, wilma adams, judith edgar, mr albert osborn, mrs l j warner, ernest johnson, stanley quinn, mervyn hall, norman grenfell, john craig, kevin anstee, harold button, wesley pearce, noel fields, haydon mathers, ian morris, kevin herdman, graeme elvey, neil holden, grenville tonzing, kenneth cruse, jim thomas, keith kelly, leo janssen, ian hughes, col sir george v lansell, mr g f osborne, mr g hudson

This wooden spokeshave was used in the making of ship model Sovereign of the Seas. It would have been used to shave and shape wood in a similar way that a plane would be used. Its name comes from its use for shaping curved objects such as wheel spokes, oars, paddles, chair legs and bows. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker.This spokeshave is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This spokeshave was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Spokeshave; two-handled, medium coloured wood tool, slightly curved centre. The front has two blade screws protruding from it, the back has a flat ‘sole’ with removable brass blade attached by screws. This spokeshave is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. (Illegible text is pressed into the top side of the spoke shave.)flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, spokeshave, spoke shave, sovereign of the sea, ship model, hobby, ship model tool, english war ship

861 John Benn Locomotive - in active service - Emerald Station Built in 1886 by Société Anonyme Usines Métallurgiques du Hainaut - Locomotives Couillet for the West Melbourne site of the Metropolitan Gas Company, as a four-wheel tank locomotive similar to 986 and named “John Benn”. The West Melbourne gas works sourced its coal from Maitland, New South Wales, and the coal was brought by ship to a wharf adjacent to the West Melbourne gas plant. John Benn and Carbon were used to haul the coal over a 762 mm (2 ft 6 in) gauge railway from the wharf to the gasworks, a distance of about 450 metres (500 yards). It was withdrawn from service in the 1930s and stored until sold privately in 1962. It was rebuilt by its new owners in the style of an American locomotive of the 1880s and was used for some years at Walhalla. It currently has the name “J.C. Rees” and is used in active service for the 861 Footplate Experience. Wheels: 2-4-2ST Builder: Couillet Build Date: 1886 Construction No.: 861 Empty Weight: Unknown Weight on Drivers: Unknown Driver Diameter: Unknown Tractive Effort: Unknown Boiler Pressure: Unknown Cylinders: Unknown Fuel: Coal Gauge: 30 inchesHistoric - Industrial railways - Metropolitan Gas Company Ltd, Melbourne Steam LocomotiveDecauville Steam Locomotive 861 John Reespuffing billy, narrow gauge, industrial narrow gauge railway, metropolitan gas company, decauville 43, steam locomotive, john rees, john benn, 861 locomotive, couillet, 861

Russell Mockridge b1928 d1958 was described 'as the greatest cyclist of all time'. He died during a race in collision with a bus that also claimed the lives of two fellow riders and a spectator. Mockridge started in 1946 by winning his first race of 40km with the Geelong Amateur Cycling Club. His wins soon earned him the nickname of the Geelong Flyer. He represented Australia at the London Olympic Games in 1948 and the Helsinki Games in 1952. He also represented Australia in the 1950 British Empire Games in Auckland where he took gold in the 1000 sprint and the 1000m time trial and silver in the 4000m pursuit. In Paris 1952 he won the Amateur Grand Prix and the following day the Open Grand Prix, beating world professional champion Reg Harris. Later that year he won Manchester Wheelers Club Muratti Cup again beating Reg Harris. He turned professional a year later and teamed with Sid Patterson and Roger Arnold to win the Paris 6 day race in 1955. Mockridge was one of 60 of 150 entrants to finish the 1955 Tour de France. He won 12 consecutive Australian championships. Mockridge was married and had a daughter, Melinda (1955)Russell Mockridge was described 'as the greatest cyclist of all time'. He achieved international notoriety as a cyclist from the mid 1940s until his death in 1958, representing Australia in the Olympic games, the Commonwealth Games, The Tour de France and other international high profile cycling events.Framed print of Russell Mockridge in cycling attire. Head and shoulders depiction. Mockeridge is wearing a leather cycling helmut and white cycling shirt typical of cycling gear of that era. The frame is wooden with gold mount and has a wire hanger on the reverse side.geelong cycling club; geelong amateur cycling club; geelong west cycling club; geelong flyer; russell mockridge; olympic games; tour de france;

This newsletter published in January 1999 by the President Bendigo RSL Alan Holmes is basically an Annual report of the Sub Branch in 1998. The 22 sub headings cover all aspects of the Sub Branch. The one photograph shows Norm Smart with his Life Membership Certificate on the left, on the right is Jack Barnes, Norm was the Treasure BRSL and Jack was the Secretary. Some of the main points are: Membership total 1998 being 797, 40 members had passed on, award of the French Legion of Honour to Jack Locket 108 years old, Anzac Day was a high standard with guest Speaker Ray Wheeler, Annual dinner guest speaker being Warick Johanson, Life Membership awarded to Norm Smart, 97 parcels had been delivered to Members in Care, Appreciation to Jack Barnes, Norm Smart & Peter Ball, 19 Bendigo RSL Members win the Edinburg Bowls Sheild, Museum report by Curator Peter Ball, Appeals report by Malcolm Angus raising in the two Appeals, ANZAC $29,223.35, POPPY $22565.20, List of the full Committee 1998 & next AGM to be February 8th 1999, the first Sandakan service and B.B.Cue to be held on Sunday March 7th at 11.00Newsletter, paper, 4 pages each folded, all print B &W, there are 22 sub headings, two advertisements and one large article re Whats on at the Bendigo & District Servicemen's Club, heading on first page is simply "Newsletter 1999" underlined, one photo showing two RSL Members.brsl, smirsl, newsletter, 1999

Black and white photograph of cable trailer 88 being loaded onto a wagon at the Spencer St / Flinders St railway yard by the railway yard travelling gantry crane. Trailer lettered M&MTB. Has a man riding the top of the car before being loaded into a I type open wagon. Photo mid to late 1920s? Photo from the Collection of the Department of Infrastructure now with the Public Records Office - image number "Box 108-1. Note: this photo is now out of copyright and may not have been an original VR photograph, but one copied from another source and collected as their Heritage series. The building in the background in Flinders Street (extension/west.) is the former Melbourne Harbour Trust Officers. By the time of this photo was taken the building was in the hands of the Department of Agriculture. Their name can just be seen on the top part of the building. It was demolished when the convention centre was built beside the WTC in the mid-1980’s. The crane was dismantled in the late 1990s around the time of the No 1 goods shed was moved to Bylands. The cable car has been stripped of a number of parts : Some windows. All the brake rigging and pawls All the roof-mounted destination boxes. The wheel skirt.Shows how redundant cable trams were sold and transported to country locations.Photograph - Black and White - Loading cable car trailer 88 at Spencer StHas Department of Infrastructure copy right stamp on rear and number "Box108-1" in ink on rear and "1-8"tramways, trams, cable trams, flinders st, sale of trams, railways, tram 88

Bob Conroy died on Tuesday, December 12, 2017 at age 88. The Daylesford trainer and brilliant horseman enjoyed a life dedicated to harness racing, which he shared with his wife Pat and their five children, including Glenn, Anne-Maree and Peter, who themselves have combined to drive more than 800 winners. Renowned as an outstanding trainer of trotters, Conroy spent a life training from Daylesford, having been raised in nearby Korweinguboora before occupying the former Daylesford Trotting Club track, from where he would often venture into neighbouring Hepburn Regional Park to educate his horses. A trots trainer, driver and breeder, Mr Conroy’s training successes include Mary Beverley’s win in the 1973 V. L. Dullard Cup, Lincoln Star's win in the 1978 Bendigo Pacing Cup and 1978 Italian Cup, and the Lightfoot Laurels on four occasions (Lucy Lastic 1997, Miss Universe 1999 and 2001 and False Gem on 2008). His greatest stakes win came when Amazon captured the $30,000 Australasian Trotters Championship final in 1984 and then the same year the E B Cochran Memorial Trotters Cup, while notable triumphs also include Mister Everest in the 1990 Chris E Howe Trotters Cup, two Central Victorian Trotting Championships in 1991 (Omaorio) and 2005 (Sutters Glory), the 1996 Coulter Crown with Lucy Lastic, First Signal's win in the 1999 Cranbourne Trotters Cup and then the R C Freestone Trotters Cup with Miss Universe. Other notable performers he trained throughout his distinguished career included multiple metropolitan winners King’s Pride, Eden’s Return, Magic Madge, Minnesota Fats, Hot And Dry, Kyvalley Duke, Speeding Fine, Baltic Prince and Looks Like Me. Bob Conroy’s trotters Bootleg Bert and Margaret Ruth delivered his last trotting wins. Yellow with black Vrb conroy, lincoln star, amazon, bendigo harness racing club, bhrc, bendigo, horses, racing colours, trotting, pacing, harness racing, bob conroy, r conroy

The Lister Auto-Truck was a small monowheel tractor built for moving light loads around factories, railway yards and similar sites. They were built by R A Lister and Company of Dursley, Gloucestershire, well known for their range of small stationary engines The Auto-Truck was one of several monowheel tractors to appear in the 1920s and '30s, with the availability of small, reliable petrol engines, as developed for motorcycles and the stationary engines for which Lister were already known. These were tricycle vehicles, with the single leading wheel used for both drive and steering. Their simple construction carried most of the mechanism on this wheel as a single unit, the chassis with the trailing wheels being little more than a trailer for balance. Simplicity was a key feature. The engines were single-cylinder and air-cooled. Ignition was by magneto, rather than requiring a battery and electrical system. One of these designs was produced in the 1920s by George Grist of the Auto Mower Co., Norton St Philip, Somerset. The engine was a JAP 600 cc four-stroke air-cooled sidevalve, a typical small engine of the time. The Auto Mower Co. were Lister agents and when Lister heard of this 'Auto-Truck' they bought one for use in their own factory. It was used to carry heavy engine castings from the foundry to the machine shop. Lister customers saw them and there was such interest in wanting to buy them that Lister negotiated with Auto Mower to build them under licence. Although Lister were already well known for their small petrol stationary engines, these were heavy cast-iron engines with water hopper cooling and unsuitable for vehicle use. Lister remained with the JAP engine for the Auto-Truck. The Auto-Truck was designed for use in factories or other places with smooth surfaces of concrete or tarmac. This allowed the use of small solid-tyred wheels with only simple suspension, making the vehicle simple, cheap and lightweight. They had little ability on soft surfaces though and could even topple over if driven carelessly across slopes. Their design was a compromise between the top-heavy nature of the tall engine grouping above its wheel and a well thought-out chassis for stability. The bearing between them was a large diameter ring roller bearing, mounted at the lowest part of the chassis. This gave rigidity and stability, even after long wear. A ring of rolled channel girder was attached to the engine group and rollers on the chassis carried the load upon this. On early Auto-Trucks this bearing is set very low, in line with the chassis members, and is covered by thin steel plates. The front panel of the engine cover is distinctive with large ventilation holes and a Lister signature cut through it. Strangely this panel is made of thick cast iron, providing substantial weight high on the engine and only adding to its top heaviness. To improve visibility of moving vehicles in noisy factories, this panel was often painted white, the rest of the vehicle being Lister's usual brunswick green. The driver was seated on a Brooks bicycle saddle, which in recognition of the lack of vehicle suspension, was carried on the end of a cantilevered bar that acted as a leaf spring. A wide handlebar on the engine group was used for steering. A squeeze bar the width of this handlebar engaged the clutch. Controls included a hand throttle, a gear lever with two forward and one reverse gears, and a large handbrake lever. The engine unit rotated freely for a full 360° rotation. When used in reverse, the Auto-Truck could either be driven from the saddle, looking backwards over the driver's shoulder; or they could dismount, swivel the engine unit around and control it as a pedestrian-controlled truck from behind. Under the engine cover were two equal diameter tanks, a fuel tank for petrol and a shorter oil tank. Engine and chain-drive lubrication used a total-loss oil system, controlled by a small pump and needle valve. Info Ref: Lister Auto-Truck - Wikipedia https://en.wikipedia.org/wiki/Lister_Auto-TruckHistoric - Industrial monowheel tractor for moving light loads around factories, railway yards and similar sites.The Lister Auto-Truck - small monowheel tractor Made of steel with three wheels. Powered by a J.A.P single cylinder petrol motor which is Hand Cranked to start.Lister puffing billy, lister, lister auto truck, monowheel tractor

Black and white photograph - Grade 1B, 1964."Attached to photograph" Back Row- L to R: Mark Stevens, David Burton, Graeme Boucher, Douglas Baillie, Jim Bunston, Glen Mitchem, John Lancaster, Philip Gailliot, Ross Millard, Neville Leslie, ?,. 2nd Row- L to R: Andrew Wood, Christopher Worsnop, Timothy Martin, Andrew Baker, Glen Pearson, Malcolm Keyes, Eugene Litoukins, Brett Smith, Donald Stevens, Russell Holden, Kelvin Burns. 3rd Row- L to R: Anne Astle, ?, Debra Conlan, Susan Terry, Sandra Hewitt, Darlene Larson, Leane Wescombe, Beverley McDonald, Jennifer Parker, ?. Front Row- L to R Jennifer Tiller, Wendy Sperling, Lorraine Davies, Jennifer Cook, Debbie Wood, Janelle Tunnecliffe, Kerry Pope, Robyn Craddock, ?, ?, ?. Teacher: Miss Marion Lyons, Mrs Jill Hobby (Absent)

This collection of articles was collated by Mary Gilbert. 743.1 - In the group are, from left to right:—First Row—Councillors T. W. Murphy (Bairnsdale), J. R. Coate (Lakes Entrance); T. Hodgd (Tambo), W. Wilson (Berwick), A. Inglis (Mirboo), E. S. Whittakers (Traralgon), and W. C. Kingston (Warragul). Second Row—J. S. Lister (Rosedale), R. Stockdale (Narracan), W. Grose (Omeo), and J. Allan (Toora). Back Row—S. Purdy (Maffra), E. Heesom (Morwell), J. Arohibald (Bruthen), Mr. Lind, M.L.A., Councillor A. E. Rodwell (Orbost), Mr. S. Langslow (Health department), and Mr. C. S. Ogllvy (Warragul). A manila folder of newspaper cuttings related to commerce and government in Orbost. 743.1 is titled, " Gippsland Councillors Wait on State Ministers and is from The Argus, July 1926 .It has a large black / white photograph of the representatives of shires and boroughs of Gippsland who formed a deputation to meet which waited most of the State Ministers with various requests. 743.4 is from the Snowy River Mail and is titled, "Cann RIver's first Hotel" and has a black and white photograph of a four-wheeled buggy pulled by four horses standing outside a hotel. 743.5 is titled "At the End of a Long Trip" and is from the Snowy River Mai. It has a black and white photograph of the Cann River hotel with Mr W. Dreverman standing outside. 743.6 is from the Snowy River Mail, September 6, 1967, and is titled, " Orbosr Businessmen 20 Years Ago" and has a black and white photograph of a group of men in business suits.orbost-business cann-river-hotel

Yields information about the staff at the SEC depot at the time of closure.Set of four Colour 27 x 27 mm slide in Kodachrome white cardboard mounts showing various workers at the depot. .1 - Group of six depot workers standing in front of a bogie tram with the depot building in the background. Left to Right: E. Davis?, A. Domaschenz, Stan Lakey, W. Kell, B. Peart, E. Fish. (See Reg Item 6450 for a colour print) .2 - Les Denmead, Tramway Superintendent standing by the depot "Bundy clock" .3 - E. Fish, holding a tea pot within the Ballarat depot. (See Reg Item 6446 for a colour print) .4 - group of eight depot workers standing alongside a four-wheel tram with the depot building in the background. Left to Right: G. Gray, Stan Lakey, ?, N.Lorensini, ? A. Domaschenz (kneeling), B. Peart and W. Trusler. (See Reg Item 6452 for a colour print) Photo from the collection of Lilian Butler. ballarat, tramways, trams, depot, sec depot, personnel, clock, bundy clock

Yields information about the griding of wheels at the tram depot following the installation of a grinder by the SEC during the mid 1930's. Shows the nature of the work and set up.Black and White photograph, of the SEC Ballarat depot wheel grinder being used to grind the wheels of a single truck tramcar. Shows a pit man/machinist using the equipment with the drive belts and wheels moving. The machinist is dressed in heavy clothing. Shows the detail of the operation. Date unknown - possibly late 1930's after installation. See Reg Item 1352* and 1353* for photos of the construction of the pits and the installation of the equipment.\ Man identified as Mr Vin Dalton See btm3400doc.pdf for background to the donor and relationship to Reg Item 3806 - Vin Dalton. Record updated 24/6/2014 for information that appeared in the June 2014 issue of Fares Please! See btm3806doc1.pdf for letter from family dated 20/7/14 with a donation. Record updated 3/8/14. See Keith Kings, The Ballarat Tramways, page 36 and The Golden City and its tramways.tramways, trams, wendouree parade, sec depot, rehabilitation, service pits, wheel grinder

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Piano Box Buggy replicates the vehicle that enjoyed respect from the public during the 1880 and early 1900's. A model of a red and black Piano Box Buggy c.1860 which was a lightweight two wheeled one passenger open horse drawn carriage with a black canopy roof where the driver sat behind. It has two large and two smaller gold painted spoked wheels with black rims, brown painted seating, two gold coach lamps and a black patterned footrest in front of the driver. The canopy has thin gold struts to open and close it depending on the weather. There are two long brown wooden shafts on each side to surround the horse. It has a model of a biscuit coloured horse with a white tail and mane with the necessary horse tack for carriage use to help the driver communicate with the horse. It was also known as the 'Bonner Buggy' and had many variations. Coach builders designed and made their own style, giving it their own name. There could have been scores of different Piano Box buggies.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses

Set of approx. 48 A4 single sided sheets outlining overhaul procedures and scope of works for Plan Programmed Maintenance (PPM) Has been part of a larger report. Appendix A - Bogie Overhaul - 2 sheets B - Rotatating Machines - 2 sheets PPM Overhaul Schedule - All tram cases - three levels proposed - 1 W class and others trams - 8 sheets B class - 5 sheets Z class - 6 sheets Maintenance and repair overhaul - transformers - 3 sheets W class and other tram defect report sheets - 2 Bus Maintenance employees/ bus for Australian cities - 1 DH16 Overhaul labour/resource chart - 1 GE 247 motors - ditto - 1 Wheel condition report form - Yarra Trams c2000 - 1 Set of forward planning sheets for tram overhauls from W681 to A300 - c 1991 - 15 sheets.trams, tramways, tramcars, preston workshops, maintenance, w class, a class, b class, z class, compressors, motors

Set of two reports by Keith Kings, titled "The Privatisation of Melbourne's Public Transport - Has the wheel turned full circle? for the Second Annual RMIT Sir Robert Risson Memorial Lecture. See Reg Item 4679 for the first lecture by Graeme Turnbull. .1 - 12 A4 pages - Keith notes that it was the actual handout of the presentation. Two copies, one stapled. 2 - 20 A4 pages, single sides - copy of the initially drafted document. Both copies have handwritten notes about their origin and use. The lecture looks at early railway development in Melbourne, private operators, development of horse drawn buses in Melbourne, competition, bus chassis, body builders, operators, private suburban operators, tramway buses, cable tram MTOCo, tramway trusts, Government involvement, formation of The Met, PTC, V/Line, corporatisation of public transport, franchising, passenger expectations of public transport, Yarra Trams and the future.trams, tramways, buses, cable trams, mto co, public transport, competition, yarra trams, franchising, the met, ptc, tramways

Black & White Photograph by the TMSV Sales of a former grip car being transport on a jinker, pulled by three horses. Photo - Victoria Ave at the corner of Beaconsfield Pde - with the Bleak House Hotel in the background. Advised by Mal Rowe. From an email from Robert Green, 19-08-2021 - advised "The Herald of 10 May 1935, p.4 has the following little paragraph : Cable Tram Tableau Entitled “Transport Cavalcade”: Horse-laughs - real ones – were heard today when a team of horses, drawing a lorry upon which was a dis-used cable tram dummy sporting “Collins Street” upon the front and “South Melb Beach” at the rear, passed along Swanston Street. Neddy’s superiority complex at seeing out these early manifestations of our mechanical age was heightened when the front wheel of a nearby motor-truck fell off." Image has been reproduced from a movie - Commuting by Cable?Has the TMSV Sales stamp on rear.trams, tramways, cable trams, grip tram, beaconsfield parade, albert park

The wooden door was salvaged from the wreck of the sailing ship Eric the Red, which was a wooden, three masted clipper ship. Eric the Red was the largest full-rigged ship built at Bath, Maine, USA in 1871, having had a 1,580 tons register. She was built and registered by Arthur Sewall, later to become the partnership E. & A. Sewall, the 51st ship built by this company. The annually-published List of Merchant Vessels of the U.S. shows Bath was still the home port of Eric the Red in 1880. The vessel was named after the Viking discoverer, Eric the Red, who was the first European to reach the shores of North America (in 980AD). The ship Eric the Red at first traded in coal between America and Britain, and later traded in guano nitrates from South America. In 1879 she was re-metalled and was in first class condition. On 10th June 1880 (some records say 12th June) Eric the Red departed New York for Melbourne and then Sydney. She had been commissioned by American trade representatives to carry a special cargo of 500 exhibits (1400 tons) – about a quarter to a third of America’s total exhibits - from America for the U.S.A. pavilion at Melbourne’s first International Exhibition. The exhibits included furniture, ironmongery, wines, chemicals, dental and surgical instruments, paper, cages, bronze lamp trimmings, axles, stamped ware, astronomical and time globes, samples of corn and the choicest of leaf tobacco. Other general cargo included merchandise such as cases of kerosene and turpentine, brooms, Bristol's Sarsaparilla, Wheeler and Wilson sewing machines, Wheeler’s thresher machine, axe handles and tools, cases of silver plate, toys, pianos and organs, carriages and Yankee notions. The Eric the Red left New York under the command of Captain Z. Allen (or some records say Captain Jacques Allen) and 24 other crew including the owner’s son third mate Ned Sewall. There were 2 saloon passengers also. The ship had been sailing for an uneventful 85 days and the voyage was almost at its end. On 4th September 1880 the Eric the Red approached Cape Otway with a moderate north-west wind and hazy and overcast atmosphere. Around 1:30am Captain Allen sighted the Cape Otway light and was keeping the ship 5-6 miles offshore to stay clear of the hazardous Otway Reef. However he had badly misjudged his position. The ship hit the Otway Reef about 2 miles out to sea, south west of the Cape Otway light station. He ordered the wheel to be put ‘hard up’ thinking that she might float off the reef. A heavy sea knocked the man away from the wheel, broke the wheel ropes and carried away the rudder. The sea swamped the lifeboats. The mizzenmast fell, with all of its rigging, then the mainmast also fell and the ship broke in two. Some said that the passenger Vaughan, who was travelling for his health and not very strong, was washed overboard and never seen again. The ship started breaking up. The forward house came adrift with three of the crew on it as well as a longboat, which the men succeeded in launching and keeping afloat by continually bailing with their sea boots. The captain, the third mate (the owner’s son) and others clung to the mizzenmast in the sea. Then the owner’s son was washed away off the mast. Within 10 minutes the rest of the ship was in pieces, completely wrecked, with cargo and wreckage floating in the sea. The captain encouraged the second mate to swim with him to the deckhouse where there were other crew but the second mate wouldn’t go with him. Eventually the Captain made it to the deckhouse and the men pulled him up. At about 4:30am the group of men on the deckhouse saw the lights of a steamer and called for help. At the same time they noticed the second mate and the other man had drifted nearby, still on the spur, and pulled them both onto the wreck. The coastal steamer Dawn was returning to Warrnambool from Melbourne, its sailing time different to its usual schedule. Captain Jones sent out two life boats, and fired off rockets and blue lights to illuminate the area. They picked up the three survivors who were in the long boat from Eric the Red. Two men were picked up out of the water, one being the owner’s son who was clinging to floating kerosene boxes. At daylight the Dawn then rescued the 18 men from the floating portion of the deckhouse, which had drifted about 4 miles from where they’d struck the reef. Shortly after the rescue the deckhouse drifted onto breakers and was thrown onto rocks at Point Franklin, about 2 miles east of Cape Otway. Captain Jones had signalled to Cape Otway lighthouse the number of the Eric the Red and later signalled that there was a wreck at Otway Reef but there was no response from the lighthouse. The captain and crew of the Dawn spent several more hours searching unsuccessfully for more survivors, even going back as far as Apollo Bay. On board the Dawn the exhausted men received care and attention to their needs and wants, including much needed clothing. Captain Allen was amongst the 23 battered and injured men who were rescued and later taken to Warrnambool for care. Warrnambool’s mayor and town clerk offered them all hospitality, the three badly injured men going to the hospital for care and others to the Olive Branch Hotel, then on to Melbourne. Captain Allen’s leg injury prevented him from going ashore so he and three other men travelled on the Dawn to Portland. They were met by the mayor who also treated them all with great kindness. Captain Allen took the train back to Melbourne then returned to America. Those saved were Captain Z. Allen (or Jacques Allen), J. Darcy chief mate, James F. Lawrence second mate, Ned Sewall third mate and owner’s son, John French the cook, C. Nelson sail maker, Clarence W. New passenger, and the able seamen Dickenson, J. Black, Denis White, C. Herbert, C. Thompson, A. Brooks, D. Wilson, J. Ellis, Q. Thompson, C. Newman, W. Paul, J. Davis, M. Horenleng, J. Ogduff, T. W. Drew, R. Richardson. Four men had lost their lives; three of them were crew (Gus Dahlgreen ship’s carpenter, H. Ackman steward, who drowned in his cabin, and George Silver seaman) and one a passenger (J. B. Vaughan). The body of one of them had been found washed up at Cape Otway and was later buried in the lighthouse cemetery; another body was seen on an inaccessible ledge. Twelve months later the second mate James F. Lawrence, from Nova Scotia, passed away in the Warrnambool district; an obituary was displayed in the local paper. The captain and crew of the Dawn were recognised by the United States Government in July 1881 for their humane efforts, being thanked and presented with substantial monetary rewards, medals and gifts. Neither the ship, nor its cargo, was insured. The ship was worth about £15,000 and the cargo was reportedly worth £40,000; only about £2,000 worth had been recovered. Cargo and wreckage washed up at Apollo Bay, Peterborough, Port Campbell, Western Port and according to some reports, even as far away as the beaches of New Zealand. The day after the wreck the government steam ship Pharos was sent from Queenscliff to clear the shipping lanes of debris that could be a danger to ships. The large midship deckhouse of the ship was found floating in a calm sea near Henty Reef. Items such as an American chair, a ladder and a nest of boxes were all on top of the deckhouse. As it was so large and could cause danger to passing ships, Captain Payne had the deckhouse towed towards the shore just beyond Apollo Bay. Between Apollo Bay and Blanket Bay the captain and crew of Pharos collected Wheeler and Wilson sewing machines, nests of boxes, bottles of Bristol’s sarsaparilla, pieces of common American chairs, axe handles, a Wheelers’ Patent thresher and a sailor’s trunk with the words “A. James” on the front. A ship’s flag-board bearing the words “Eric the Red” was found on the deckhouse; finally those on board the Pharos had the name of the wrecked vessel. During this operation Pharos came across the government steamer Victoria and also a steamer S.S. Otway, both of which were picking up flotsam and wreckage. A whole side of the hull and three large pieces of the other side of the hull, with some of the copper sheathing stripped off, had floated on to Point Franklin. Some of the vessels yards and portions of her masts were on shore. The pieces of canvas attached to the yards and masts confirmed that the vessel had been under sail. The beach there was piled with debris several feet high. There were many cases of Diamond Oil kerosene, labelled R. W. Cameron and Company, New York. There were also many large planks of red pine, portions of a small white boat and a large, well-used oar. Other items found ashore included sewing machines (some consigned to ‘Long and Co.”) and notions, axe and scythe handles, hay forks, wooden pegs, rolls of wire (some branded “T.S” and Co, Melbourne”), kegs of nails branded “A.T. and Co.” from the factory of A. Field and Son, Taunton, Massachusetts, croquet balls and mallets, buggy fittings, rat traps, perfumery, cutlery and Douay Bibles, clocks, bicycles, chairs, a fly wheel, a cooking stove, timber, boxes, pianos, organs and a ladder. (Wooden clothes pegs drifted in for many years). There seemed to be no personal luggage or clothing. The Pharos encountered a long line, about one and a half miles, of floating wreckage about 10 miles off land, south east of Cape Otway, and in some places about 40 feet wide. It seemed that more than half of it was from Eric the Red. The ship’s crew rescued 3 cases that were for the Melbourne Exhibition and other items from amongst the debris. There were also chairs, doors, musical instruments, washing boards, nests of trunks and fly catchers floating in the sea. Most of the goods were saturated and smelt of kerosene. A section of the hull lies buried in the sand at Parker River Beach. An anchor with chain is embedded in the rocks east of Point Franklin and a second anchor, thought to be from Eric the Red, is on display at the Cape Otway light station. (There is a photograph of a life belt on the verandah of Rivernook Guest House in Princetown with the words “ERIC THE RED / BOSTON”. This is rather a mystery as the ship was registered in Bath, Maine, USA.) Parts of the ship are on display at Bimbi Park Caravan Park and at Apollo Bay Museum. Flagstaff Hill Maritime Village also has part of the helm (steering wheel), a carved wooden sword (said to be the only remaining portion of the ship’s figurehead; further research is currently being carried out), a door, a metal rod and samples of wood. Much of the wreckage was recovered by the local residents before police and other authorities arrived at the scene. Looters went to great effort to salvage goods, being lowered down the high cliff faces to areas with little or no beach to collect items from the wreckage, their mates above watching out for dangerous waves. A Tasmanian newspaper reports on a court case in Stawell, Victoria, noting a man who was caught 2 months later selling tobacco from the wreckage of Eric the Red. Some of the silverware is still treasured by descendants of Mr Mackenzie who was given these items by officials for his help in securing the cargo. The gifts included silver coffee and tea pots, half a dozen silver serviette rings and two sewing machines. The wreck and cargo were sold to a Melbourne man who salvaged a quantity of high quality tobacco and dental and surgical instruments. Timbers from the ship were salvaged and used in the construction of houses and sheds around Apollo Bay, including a guest house, Milford House (since burnt down in bushfires), which had furniture, fittings and timber on the dining room floor from the ship. A 39.7 foot long trading ketch, the Apollo, was also built from its timbers by Mr Burgess in 1883 and subsequently used in Tasmanian waters. It was the first attempt at ship building in Apollo bay. In 1881 a red light was installed about 300 feet above sea level at the base of the Cape Otway lighthouse to warn ships when they were too close to shore; It would not be visible unless a ship came within 3 miles from it. This has proved to be an effective warning. The State Library of Victoria has a lithograph in its collection depicting the steamer Dawn and the shipwrecked men, titled. "Wreck of the ship Eric the Red, Cape Otway: rescue of the crew by the Dawn". “The Eric the Red is historically significant as one of Victoria's major 19th century shipwrecks. (Heritage Victoria Eric the Red; HV ID 239) The wreck led to the provision of an additional warning light placed below the Cape Otway lighthouse to alert mariners to the location of Otway Reef. The site is archaeologically significant for its remains of a large and varied cargo and ship's fittings being scattered over a wide area. The site is recreationally and aesthetically significant as it is one of the few sites along this coast where tourists can visit identifiable remains of a large wooden shipwreck, and for its location set against the background of Cape Otway, Bass Strait, and the Cape Otway lighthouse.“ (Victorian Heritage Database Registration Number S239, Official Number 8745 USA) Door from the wreck of the ship Eric the Red. The wooden singular rectangular door includes three insert panel sections. The top section is square shaped and is missing its panel or glass. The centre timber panel is about a third of the height of the top panel and the bottom timber panel is approximately equal in height to the total height of the two upper panels. The door fastenings include both a metal door latch and traditional door bolt. They are both attached to the front right hand side of the door. The bolt is just below the top panel, and the door latch is in approximately the centre of that side. The door latch has a round mark where a handle could have been attached. The wood of the door has scraping marks in a semi-circle around the door latch where the latch has swung around on its one remaining fastening and grazed the surface. There is a metal hinge at the top section of the door on the opposite side to the latch. The painted surface has been scraped back to expose the wood. The door is shorter than the average height of a person. On the reverse of the door there are lines on the panels, just inside their edges, is what appears to be pencil. The door is not aligned straight but is skew to centre.warrnambool, flagstaff hill, flagstaff hill maritime village, maritime museum, shipwreck coast, great ocean road, shipwreck artefact, eric the red, jaques allen, sewall, 1880, melbourne exhibition 1880, cape otway, otway reef, victorian shipwreck, bass strait, eric-the-red, door

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 21 NQR - Open Medium Truck with drop ends VR Service History 26/11/1898 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 *NQR 21.VA - 26/11/1898 NWS Built new - / /1926 - To NQ 21.VA - NQ 21.VA - 17/ 9/1936 NWS Into Workshops - 29/ 4/1937 NWS Out of Workshops (50 days) Puffing Billy Service History or Notes Historic - Victorian Railways - Narrow Gauge Rolling Stock - Open medium truck with seats (No. 21)21 NQR - Open Medium Truck converted to Excursion Car with seats made of Steel and metal21 NQRpuffing billy railway, pbr, rolling stock , 21 nqr, victorian railways, nqr open medium truck with seats

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 103 NQR - Open Medium Truck 16/12/1909 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 VR Service History *NQR 103.VA - 16/12/1909 NWS Built new - / /1926 - To NQ 103.VA - Puffing Billy Service History or Notes Untrafficable at ClematisHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium TruckA large rectangualr open good wagon, with removable sides and ends creating a flat-bed. There are three long drop-down sides and eight narrow guage wheels. The wagon is 7671mm long and 1905mm wide with steel couplings at either end. The wagon is painted crimson (faded) with the words '103 NQR' stenciled in white at both ends. 103 NQRpuffing billy railway, pbr, rolling stock , 103 nqr - open medium truck, victorian railways, narrow gauge rolling stock, nqr wagon

Three copies of Bendigo Sub-branch R.S.S.A.I.L.A. Annual Victory Ball held at the Town Hall, Bendigo on August 17th, 1948. Guests of Honour were Lt.-Gen. S. G. Savige, C.B., C.B.E., D.S.O., M.C., E.D. AND Mrs Savige. Card is cream with gold print on the front and a blue RLS badge. Other printing is brown. The inside of the tri-fold has a Dance Program of 28 dances and a space for Autographs. The other side has the Debutantes: Clarice Johnston, Beth Brown, Hazel Somerville, Pat Fairless, Dorothy Wilson, Enid Sutherland, Enid Hilson, Pat Johnson, June Richards, Pat Griffiths, Ann Mangan, Valerie Hunt, Pat Burton, Nancy Osgood, Emily Johnson, Janette Sutherland, Edith Johnson, Elaine Stemmer, Shirley Hinton, Marjorie Peterson, Elva Munro, Helen Balsillie, Nan Fairless and Shirley March. Chaperone:Mrs L J Warner. Flower Girls: Margaret Thomas and Beverley Heeps. Partners: Jack Wright, Douglas Dickinson, Graeme Hoy, Dave Beattie, Jim McNamara, Arthur Sutherland, Ken Burgess, Norm Fath, Robert Jackson, Alec Pianto, Kenneth Maes, Neil Holden, Brian Ackland, John Clarke, Les Johnstone, Ken Johnson, Frank Holden, Keith Rollinson, Dave McDougall, Don Peterson, Les Morey, George Hunt, Geoff Meggs and Ray Fitzgerald. President Bendigo Branch R.S.L. Col G V Lansell. Chairman Ball Committee: Mr F E Jackson. Hon. Secretary Ball Committee: Mr J W Swatton. Printed by James, Print, Eaglehawk.James, Print Eaglehawkevent, social, victory ball, r.s.l. bendigo collection - annual victory ball 1948, lt-gen s g savige, mrs savige, clarice johnston, beth brown, hazel somerville, pat fairless, dorothy wilson, enid sutherland, enid hilson, pat johnson, june richards, pat griffiths, ann mangan, valerie hunt, pat burton, nancy osgood, emily johnson, janette sutherland, edith johnson, elaine stemmer, shirley hinton, marjorie peterson, elva munro, helen balsillie, nan fairless, shirley march, mrs l j warner, margaret thomas, beverley heeps, james, jack wright, douglas dickinson, graeme hoy, dave beattie, jim mcnamara, arthur sutherland, ken burgess, norm fath, robert jackson, alec pianto, kenneth maes, neil holden, brian ackland, john clarke, les johnstone, ken johnson, frank holden, keith rollinson, dave mcdougall, don peterson, les morey, george hunt, geoff meggs, ray fitzgerald, col g v lansell, mr f e jackson, mr j w swatton

A light blue document titled "Bendigo Teachers' College Graduation Ceremony 1956". Also on the front page is a list of the staff working at the college. On the inside cover is the "Significance of the Ceremony" and the "Order of the Ceremony". A welcome to visitors was given by Mr. F. M. Courtis and the Principal gave the college charge. The signing of the 'Graduation Book' was presented to Mr. A. L. Harris Inspector of Schools, by Miss J. C. Burnett. The final call of the roll for 1956 was given by Mr. C. L. Barker. Congratulations were offered by the Mayor Cr. A .S. Craig and Mr. S. J. Tongway Head Teacher of Gravel Hill State School. Finally the Occasional Address was presented by Mr. J. G. Cannon Chief Inspector of Primary Schools. The next page has a list of the "Students of 1955-56". The back page has the "Principal's Charge". Bolton Bros., Printers, Bendigo. The staff members names are Miss J. C. Burnett, Mrs. F. M. Petri, Miss G. L. Davie, Miss N. L. Hutcheson, Miss E. B. Morris, Mrs C. I. Skehan, Miss B. H. Cowling, Mr. F. M. Courtis, Mr. L. J. Pryor (Principal), Mr. C. L. Barker, Mr. M. Brown, Mr. T. J.McCabe, Mr. G. W. D. Boyd, Mr. N. J. Taylor, Mr. L. A. Hall, Mr. R. L. Strauch and Mr. G. S. Poulsen. The graduating students are - Margaret Carolyn Allinson, Robert Eric Allison, Diane Backhouse, Mary Elizabeth Barbour, Patricia Mary Blake, Peter Brian Cook, Edgar Vincent Crampton, Heather Lorraine Dalrymple, Josephine Margaret Delle Vergini, Roy Stanislaus Dickson, Margaret Isobel Diss, Barry Edwards, Margaret Lorraine Edwards, Edith Dawn Ellis, Graeme Leslie Evans, Dorothea Helen Farrell, Maureen Margaret Forrester, Roma June Hamilton, Carmel Catherine Hart, Esma Olive Haw, Margaret Helen Hogben, Beverley Norwood Hutchinson, Ronald Ireland, Edith Dawn Ireson, Joy Amelia Jeffrey, Valerie Margaret Jones, Noel Charles Kilby, Maxene Shirley King, Dorothy Lorraine Lee, Maxwell John Lovelace, Marie Joan Madin, Margaret Mary Mannes, William Daniel Manson, Janice Renyra Martin, Margaret Dawn Merlo, Anne Mills Moodie, Garry Norman Muller, Janice Nancy McKean, Ronald Walter McKendrick, Norma Maud Neal, Trevor Raymond Oakley, Bruce Peake, Marjorie Peile, Elaine Margaret Plant, Helen Rae Rawiller, Lynette Theresa Reid, Philip William Eric Reid, Geoffrey Rolf Richards, Margaret Rodgers, Anne Marie Sanders, Kenneth Maxwell Sargeant, Pamela Marie Saunders, Jessica Evelyn Scoones, Jean Neilson Shadforth, Beverley Mabel Slade, Nancye Elizabeth Smith, Margaret Eleanor Speers, Elizabeth Stewart, Leon Maurice Thompson, Margaret Gwen Till, Maureen Alma Trimble, George Walter Vincent, John Fairbank Phillip Waddington, Joyce May Walker, Austin Edward Walsh, Anne Elizabeth Warman, Raymond Henry Way, Dorothea Lillian Wearne, Aileen Margaret Weeks, Gordon Raymond Williams, Janice Margaret Wood, Doreen Amelia Worsnop and Marie Ethel Wright.bendigo, education, bendigo teachers' college graduatio, la trobe university bendigo collection, collection, bendigo teachers' college, bendigo, education, teaching, teachers, students, bendigo teachers' college staff, bendigo teachers' college students, tertiary education, teacher training, history, graduation, graduation ceremony, graduates, graduands

The wool for this jacket began on the back of two sheep many kilometres apart. The first fleece for the warp was shorn from a single Merino at Currotha in Moree, NSW. The wool was 21-22 micron and the bloodline is a cross between Bundemar, Rossmore and Eural. The second sheep that provided wool for the weft was shorn in Beaufort, Victoria. It was a single Corriedale fleece shorn at Niawanda. The distance between these two towns is approximately 1250kms; a 15-hour car ride between paddocks. The two fleeces were spun and weaved together by the donor’s mother, Marjorie Allnutt. A level of talent is required to spin Merino fleeces. It is easier to spin cross bred wool, such as Corriedale, because it is less dense and much easier to comb, card and then tease out for a spinning wheel. The donor Philip Allnutt had a suit tailored out of the completed fabric at Ravensdale J & Son, 37 Swanson Street, Melbourne. The tailor was then a member of the Master Tailors Federation of Victoria. The business closed around 1986. Adding to the jacket’s story is its relationship to the household board game “Squatter”. Marjorie Allnutt was the sister-in-law of Robert Crofton Lloyd, the inventor of the wool themed boardgame. With more than 500,000 games sold in Australia as of 2007, it is the most successful board game ever produced in the country. The original “Squatter” board game is located within the National Wool Museum’s Collection. Philip Allnutt donated the Jacket to the National Wool Museum Collection in 2021. Cream singled breasted jacket with a narrow overlap and one column of buttons for fastening. The jacket features notched lapels of a medium width and two buttons of a cream & brown marble. The jacket has three visible pockets. A jetted pocket with no flap is on the right breast. A further two jetted no flap pockets finish an inch above the hem, on either side of the opening. Internally, the jacket features a further two pockets and a white silk lining for comfort. At the cuffs, the jacket utilises another 2 buttons of the same cream & brown marble.merino, currotha, moree, nsw, niawanda, corriedale, beaufort, victoria, hand spun, hand weaved