Showing 2041 items
matching engraved
-
Whitehorse Historical Society Inc.
Decorative object - Trophy
See Ref. 4362Oblong wooden shield with large shield in the middle with a circular medallion in the centre of a large metal shield. This is surrounded by six small metal shields. |Large metal shield engraved 'Blackburn East Primary School - House Athletics Sports'.|Smaller Shields:|1. Mackellar 1983-2. Paterson 1984-3. Mackellar 1985See abovetrophies & awards, sports -
Whitehorse Historical Society Inc.
Functional object - Fountain pen
From the collection of Betty McPheeA black bakelite pen with gold ink lever, pocket grimp and circle trim around lid. Top of lid has gold Swan insignia. Gold nib. Engraved on side, 'Swan' self filler; Mabie, Todd & Cribb; Made in England. Includes Insignia Trade Mark. Swan across barrel near nib.Swan self filler|Mabie, Todd & Cribb|Made in Englanddomestic items, writing equipment -
Flagstaff Hill Maritime Museum and Village
Plaque - Nameplate, Morts Dock & Engineering Co. Ltd, Matthew Flinders I, 1917
This nameplate was attached to the steel steamer Matthew Flinders I, a Suction Hopper Dredge used for pumping up sit and sanding from seabeds. It was donated by the Marine Engineer, Neville Dodds, from Ports and Harbours, from the Matthew Flinders I. The Matthew Flinders was constructed by Morts Dock & Engineering Coy. Ltd in Sydney, New South Wales. Identified as Ship No. 40, the dredge had twin screw engines that were made in Sydney. Its gross tonnage was 1180. It was launched on July 15th, 1916, and registered in 1917 at the Port of Melbourne by the owner, the Department of Public Works in Victoria. Unlike bucket dredges, the Matthew Flinders did not use permanent moorings but instead had bow and stern anchors. It travelled forward on the bow anchor, taking up a strip of even-depth wilt from the bed below. A local newspaper noted that the Matthew Flinders has many advantages that were especially useful for its work at Warrnambool. Warrnambool Harbour had been experiencing silting and sanding for many years. The problem continued even after the construction of the Breakwater in 1890, which was overseen by New Zealand engineer Arthur Dudley Dobson. Melbourne’s Department of Ports and Harbours sent the new Matthew Flinders to dredge the heavy silting in the Warrnambool Harbour in May 1919. This work was previously done by the smaller dredge, the Pioneer. However, after a month of work, the Matthew Flinders was returned to Melbourne for alterations to make it suitable for work in the heavy seas it experienced at Warrnambool. Both dredges were sent up from Melbourne when required over the years to periodically attend to the silting in the Harbour, but the Matthew Flinders was preferred because of its efficiency. It was still dredging the Harbour even in July 1938. The ship’s original master was J G Rosney. In February 1922 Percy Taylor from Ports and Harbours joined the Matthew Flinders as a Mate. 1923 the master in charge was Captain Dunbar. In August 1926 Percy Taylor was appointed as her Master and was later transferred to the Pioneer as Master in 1933. 1930 the dredges were no longer required as the Harbour was no longer suitable as a port. However, one source notes that the Matthew Flinders was still dredging the Harbour in 1938.This nameplate is significant for its association with the suction hopper dredge Matthew Flinders I, which was used to remove the build-up of silt and sand from the Warrnambool Harbour, allowing shipping activities to continue to operate in the Port of Warrnambool. The nameplate identifies the vessel and shows that it was built in Australia in the early 20th century for use within Australia. The need for dredging in the Warrnambool Harbour was a serious and ongoing problem, as silting continued to happen after a series of measures were taken to try and resolve the issue. Eventually, the Harbour could no longer function successfully as a port.Brass nameplate, rectangular with cut-away corners and moulded text, mounted with screws on timber. The plate is from a vessel, the dredge Matthew Flinders I, ship no. 40, built by Morts Dock & Engineering Coy Ltd in Sydney, and registered in 1917. A small rectangular engraved plaque below the nameplate gives further details of the ship and the donor.On nameplate: "MORTS DOCK / & / ENGINEERING COY. LTD. / SHIP BUILDERS / SYDNEY 1917 / SHIP NO 40" On small plaque: "Donated by / NEVILLE DODDS / PORTS & HARBOURS / MARINE ENGINEER / EX "MATTHEW FLINDERS I"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, dredge, mathew flinders i, steel steam ship, twin screw engines, nsw, state of victoria, suction hopper, public works melbourne, warrnambool harbour, lady bay, sanding, silting, breakwater, morts dock & engineering co ltd, captain dunbar, ship no. 40, niville dodds, ports & harbours, marine engineer, marine technology, ship relic, percy taylor, matthew flinders, pioneer -
Bendigo Military Museum
Accessory - IDENTITY DISCS, Est 1915-16
Leo Harris 3132 KIA. Refer 2478 for service history also 2476, 2477P.Identity Discs re L Harris. .1) Disc, round, aluminium with hole at top for tie cord, lettering has been stamped on. .2) Disc, round, aluminium with hole at top for tie cord, lettering engraved on. .3) Disc, round, aluminium, coin shaped with 6 point star central, hole at top for tie cord..1) "L Harris-3132-15 FAB" .2) "3132-L Harris-23rd A.I. Wes" .3) "Pte L Harris B Coy . 7 23 Ref"identity, military -
Bendigo Military Museum
Award - MEDAL SET & BADGE, 1915-18, Post WW1
Leah Rosenthal ARRC enlisted in 1915 and embarked 18.12.15 from Australia to join the QAIMNSP service. Her service was terminted on 9.5.19. She was awarded the ARRC (2nd class) for her work at a CCS on the Western Front. Articles written about her state that she was also awarded an "MM". ARRC, (Royal Red Cross). CCS, (Casualty Clearing Station). MM, (Military Medal) QAIMNSP, (Queen Alexandria's Imperial Military Nursing Service) A brother Samuel was KIA in the war, refer 620. The badge was an “Empress Club 1914 Emergency Voluntary Aid Committee badge”which was a Ladies Club in Dover street Piccadilly. “Fortiter Fideliter” meaning “Strongly Faithful”. The centre of the badge is a Maltese Cross. There is a ribbon with the badge but missing. During WW1 the Club was used as a War Supply Depot. In 1917 a Red Cross hut was opened on the roof of the building. Pre war Leah had done her training at Alfred Hospital. After the war Leah and close friend Isabella Jobson bought St Lukes Private Hospital and renamed it “Vimy House”. Leah passed away in 1930. Isabella inaugurated and annual prize in Leah’s name at the Alfred Hospital for the best Theatre Nurse. Isabella had gone with Leah to England and they both served together during WW1..1) Medals, court mounted set of (3) re L.Rosenthal. 1, 1914-1915 Star. 2. War Medal 1914 -1919. 3. Victory Medal, replica not engraved. .2) Badge metal slightly oval Red cross centre with white and gold trimming. In gold lettering "Fortiter Fideliter 1914" around the outside.,1) Sister L Rosenthal Q.A.I.M.N.S.Pmedals, hospitals, military, nursing -
Kiewa Valley Historical Society
Rabbit Traps x3
Rabbits are recognised as a pest in Australia. They were often trapped and eaten especially during the depression years of the 1890s and 1930s but also the 1950s and 1960s. Steel-jaw traps work by snapping shut on the leg of an animal, holding it until a trapper arrives, or until the animal dies or wrings its paw off. They became illegal in Australia during the 1980s on animal cruelty grounds. Some old rabbit traps are valuable.Used by residents in the Kiewa ValleyA steel jaw trap has jaws that are designed to spring together. It is illegal to use them in Australia. 2 of the rabbit traps are 'S. Griffiths 3 stars IXL Ref. "one of the pioneers, well known among long-experienced trappers' Page 21 Farmyard Relics by Ken Arnold. The other trap ha a picture of a bird engrave on it.rabbit traps, steel-jaw traps -
Warrnambool RSL Sub Branch
Army Uniform, jacket, Fletcher Jones & Staff, 1998
This uniform was worn by Bernie Farley, present secretary of Warrnambool RSL (2019). The uniform was made by Fletcher Jones & Staff, Warrnambool in 1998.Jacket with four pockets each with metal button fasteners. Four front metal button fasteners. One inside pocket . Regimental badges on lapels, Badge over right pocket. Epaulets with metal buttons, a crown and Australia. All metal buttons engraved with army insignia. Front metal button fasteners secured with safety pinsTag inside (left) FLETCHER JONES VICTORIA 1998 Arrow signifying govt. NAME. SERVICE NUMBER. 70% Wool, 30% Polyester, DRY CLEAN ONLY (A) Warm Iron ZC804B AR0003army uniform, military uniform, warrnambool ex service -
Flagstaff Hill Maritime Museum and Village
Ceremonial object - Cross, Circa 1942
This cross or crucifix is part of the original furnishings of St Nicholas Church, Williamstown, Victoria. The church was operated by the Missions to Seamen organisation. the cross was presented to the church in 1942 by Mrs R J Ewart, M.N., to commemorate the lives of those lost at sea. The cross was donated to Flagstaff Hill Maritime Village by the Missions to Seamen Victoria on 29th May 1979 along with many other items. THE MISSIONS TO SEAMEN (Brief History: for more, see our Reg. No. 611, Set of Pews) The Missions to Seamen, an Anglican charity, has served seafarers of the world since 1856 in Great Britain. Its symbol is a Flying Angel, inspired by a Bible verse. Today there are centres in over 200 ports worldwide where seamen of all backgrounds are offered a warm welcome and provided with a wide range of facilities. In Victoria, the organisation began in Williamstown in 1857. It was a Sailors’ Church, also known as ‘Bethel’ or the ‘Floating Church’. Its location was an old hulk floating in Hobson’s Bay, Port of Melbourne. It soon became part of the Missions to Seamen, Victoria. In the year 2000 the organisation, now named Mission to Seafarers, still operated locally in Melbourne, Portland, Geelong and Hastings. The Ladies’ Harbour Lights Guild was formed in 1906 to support the Missions to Seamen in Melbourne and other centres such as Williamstown. Two of the most significant ladies of the Guild were founder Ethel Augusta Godfrey and foundation member Alice Sibthorpe Tracy (who established a branch of the Guild in Warrnambool in 1920). The Guild continued its work until the 1960s. In 1943 a former Williamstown bank was purchased for the Missions to Seaman Club. The chapel was named St Nicholas’ Seamen’s Church and was supported by the Ladies’ Harbour Lights Guild, the Williamstown Lightkeepers’ Auxiliary and the League of Soldiers’ and Sailors’ Friends. It ceased operation in 1966. A Missions to Seamen Chapel and Recreation Room was a significant feature of ports during the late 1800s and into the 1900s. It seemed appropriate for Flagstaff Hill to include such a representation within the new Maritime Village. Hence, the Melbourne Board of Management of Missions to Seamen Victoria gave its permission on 21st May 1979 for the entire furnishings of the Williamstown chapel to be transferred to Flagstaff Hill. The St Nicholas Seamen’s Church was officially opened on October 11, 1981 and closely resembles the Williamstown chapel. This brass cross is significant historically for its origin in the St Nicholas Mission to Seamen's Church in Williamstown, established in 1857 to cater for the physical, social, and spiritual needs of seafarers. It originated in Bristol, England when a Seamen's Mission was formed in 1837. The item is historically significant for its connection to the Ladies Lightkeepers’ Auxiliary, an organisation of women, formed to support seafarers. The connection of this item to the Mission to Seamen and to the Ladies Lightkeepers’ Auxiliary highlights the strong community awareness of the life of people at sea, their dangers and hardships, and their need for physical, financial, spiritual and moral support. Polished brass altar cross on a round base with top and side branch ends shaped like three-leafed clovers. The Centre of the cross is a circular shape. An inscription is engraved in script on the base. Mrs R.J. Ewart presented the cross to the church in 1942 to commemorate those lost at sea. This is now part of the St Nicholas Seamen's Church Collection. "Presented by / Mrs. R.J. Ewart, / M.N. / In Memory of those lost at sea. / 1942"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, religion, church furnishings, mission to seamen victoria, cross, crucifix, r j ewart, st nicholas church williamstown, religious symbol, church furnishing -
Flagstaff Hill Maritime Museum and Village
Decorative object - Wood carving, David Hay, circa 1847
This wood carving is handmade and comes from the Schooner Enterprise. The inscription on the rear of the carving was added at a later date. The statement that the vessel "was the first boat up the river Yarra with Fawkner" is incorrect, confusing this Warrnambool wreck "Enterprise" with Fawkner's vessel "Enterprize" (sometimes written "Enterprise"). THE “ENTERPRISE” 1847-1850 The wooden, two-masted schooner Enterprise was built in New Zealand in 1847 and registered in Melbourne, Australia. The Enterprise carried cargos of agricultural produce and other commodities for trade between the ports of the Colony. On September 14, 1850, the Enterprise was at anchor in Lady Bay under its Master, James Gardiner Caughtt, loaded with a cargo of wheat and potatoes. A strong south-easterly wind caused the vessel to drag on its only anchor and the rudder was lost. The gale-force wind blew it sideways and it became grounded. A local indigenous man, Buckawall, braved the rough sea to take a line from the shore to the Enterprise. All five members of the crew were able to make it safely to land. The Enterprise was wrecked. The Enterprise wreck was in an area called Tramway Jetty in Lady Bay. Since then the area became the location of the Lady Bay Hotel and now, in 2019, it is in the grounds of the Deep Blue Apartments. In fact, with the constantly changing coastline through built-up sand, the wreck site is now apparently under the No 2 Caravan Park on Pertobe Road, perhaps 150 metres from the high tide. Its location was found by Ian McKiggan (leader of the various searches in the 1980s for the legendary Mahogany Ship). DIFFERENTIATING the New Zealand Schooner “Enterprise” from John Fawkner’s “Enterprize“ Dr Murray Johns, Melbourne, says in his article The Mahogany Ship Story “… As I documented in 1985, the Warrnambool wreck was of an entirely different ship, also called Enterprize [with the spelling ‘Enterprise’], but built in New Zealand in 1847. Fawkner’s ship had already been sold to Captain Sullivan in 1845 and was wrecked on the Richmond Pier in northern New South Wales early in 1847. “ - (further details are in NOTES: and FHMV documents) The wood carving is significant for its association wreck of the Victorian Heritage Listed schooner Enterprise, VHR S238, being a New Zealand-built but Australian-owned coastal trader. The wreck was also significant for its association with indigenous hero Buckawall who saved the lives of the five crew on board.Wood carving; a handmade, carved wooden board from the vessel "Enterprise", 1847-1850. The board is made from several pieces of wood. It is concave, with engraved border and motifs, and has decorative scrolls on the sides. The inscription, added to the carving at a later date, is on the rear of the board and inscribed in blue ink script. A paper tag marked 'Swinburne' was with the board."Swinburne", "from the vessel Enterprise" Handwritten in blue ink script "Made from / wreck of / "Enterprise" first boat / up river Yarra with / Fawkner later wrecked / at Warrnambool Vic"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood carving, carving, carving craft, 1850 wreck, john watson, james gardiner caught, tramway jetty, lady bay, rescue line, ian mckiggan, vhr s238, relic, buckawall, schooner, enterprise, coastal trader, new zealand, indigenous rescue, indigenous hero -
Flagstaff Hill Maritime Museum and Village
Domestic object - Butter Knife, Barker Brothers, Ca. 1885-1895
This butter or cheese knife is a decorative example of electroplated cutlery that had become an affordable alternative to more expensive silver cutlery in the late 1800s to early 1900s. The knife has stamp marks in the back of its handle that are a combination of letters and symbols used by British silversmiths to identify their workmanship. The design and type of this knife was not normally used by everyday people but rather those of a higher social class with time and money to have a particular decorative knife to serve butter or cheese. The marks on the handle tell that it was made of nickel silver, and electroplated with superior quality Stirling silver. The Barker Brothers of Birmingham made the knife between 1885 and 1907, but most likely before 1895. It was made for the British, or British colonial, people, connected with a government department such as the navy or defence. This story may be slightly inaccurate, as some silversmiths added extra ‘pseudo marks’ to their wares to disguise the quality. THE MARKS and their meaning – - ‘A1’ The silver used in electroplating this knife was the highest level, ‘superior quality’, measured in grams of silver per table spoon or table fork, with ‘A1’ being 2 2/3 grams, and ‘D’ being 0 1/2 grams of silver. - ‘BB’ The Baker Brothers used these initials from 1885 to 1907. - ‘[crown symbol]’ – This symbol is used for Sterling silver but this knife is a metal alloy. The crown is also the town mark of Sheffield (appointed by the Sheffield Assay Office) but this knife was made in Birmingham, which has the town mark of an anchor. The Barker Brothers may have added the crown mark to this electroplated silverware as a ‘pseudo hallmark’, leading the buyer to think that it was actual Sterling silver. The use of pseudo hallmarks by electroplaters of the Victorian era was common practice but it was illegal. In 1895 the unlawful practice was seen as imitating the Sheffield Silver Mark and the law was firmly applied to eradicate the deception, so items with this mark probably date before 1895. - [EPNS] Electro Plated Nickel Silver, called nickel silver or German silver, is a metal alloy that usually combines copper, nickel and zinc (60 percent copper, 20 percent nickel, 20 percent zinc). It has a silver-white appearance and is sometimes referred to as ‘white ware’. It does not contain any silver but is often used as a base for electroplating, when the item is covered with a thin layer of silver to give it the polished appearance of pure silver. It became popular in the late 19th and early 20th century as an affordable substitute for sterling silver. - Broad Arrow - an official stamp that indicates it was once the property of Britain government, either in Britain or one of its colonies, and used in the defence force. In Great Britain, from an 1875 government act, it was, and still, is a crime to forge or wrongfully use, the broad arrow symbol. The BARKER BROTHERS of Birmingham - Barker Brothers were one of the earlies firms of Birmingham silversmiths, established in 1801 by Mary Barker. They became Barker & Creed, then William and Matthias Barker, then from 1885 they were the Barker Brothers. They were operating in Paradise Street in 1871 until in 1903 they moved to Unity Works, Constitution Hill, in Birmingham. The firm also had a showroom at 292 High Holborn, London, from the early 1900s to the 1980s. In 1907 the firm became Barker Brothers Silversmiths Ltd, then in the 1960s they merged with Ellis & Co, becoming Barker Ellis Silver Co. Ltd. In 1979 they were registered in USA as Ellis & Co., Barker Ellis, and Ellis Barker. The business went into administration in 1992, after almost 200 years of production. The firm advertised as specialists in electroplating, and used the trademarks BRITANOID, UNITY PLATE and THE HYGENIA.This knife is historically significant, dated from 1885 to 1907 but most likely pre-1895, and made by the longstanding Birmingham silversmiths, the Barker Brothers, established in 1801. The knife is an example of decorative flatware used by people of ’class’. It also has the broad arrow stamp, connecting it to the British government, in particular the ordinance department. The stamp also connects it to other items in our collection with that stamp. It may have been connected to pre-Federation government organisations and officials such as the army Garrison, government naval vessel, police, lighthouse keepers, harbour masters. The knife is the only example of its kind in our collection, being a decorative silver butter or cheese knife, made by the Barker Brothers of Birmingham. Butter knife, or cheese knife, electroplated nickel silver (EPNS). Upper blade edge has decorative shape and engraved motifs, lower blade edge is bevelled to a cutting edge, and narrow plain handle flares out to a wide, rounded end. Maker’s marks are stamped on the reverse. Made by Barker Brothers of Birmingham in the late-19th century. Stamps: “ -
NMIT (Northern Melbourne Institute of TAFE)
Timber Trophy: PTC St Georges Dragons v Alberts Knights
Timber trophy shaped as a shield on a timber stand. Across the top of the shield is written 'St.George's Dragons vs Albert's Knights. In the centre is a set of cricket stumps and a cricket bat and around the outside are six silver shields engraved with details of each year's winners. Four are completed with 1978, 1979, 1980, 1981; two shields are blank. preston technical college, trophy, cricket competition, nmit -
Bendigo Historical Society Inc.
Award - SANDHURST FOOTBALL CLUB PREMIERSHIP CUP
Bendigo and District Football Association Premiership season 1893 Sandhurst Football Club cup, presented to Mr F Goyne vice Capt by the players as a token of esteem. Britannia metal trophy cup embossed with acanthus leaves, floral garlands and stars, standing on circular base with 2 handles to body and lid with finial, engraved on both sides.Britannia Phillip Ashbury & Sons Sheffield 2 1161 Ktrophies & awards, sports, football -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Tool - Cranioclast used by Dr Michael Kloss
A cranioclast was used to crush and extract the skull of a fetus to aid delivery in cases of difficult and obstructed labour. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal cranioclast. Instrument consists of two arms that join together with a pin. When joined, the arms wrap around each other for extra strength. Each arm has a handle for grip, and there is a ratchet with a wingnut at the end of the handles for widening the aperture between the arms and locking the arms in place. Each arm of the instrument is engraved with the word 'Kloss'.'Kloss'obstetrics, destructive instruments -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Set of surgical forceps, Archibald Young of Edinburgh
Set of metal surgical forceps. Forceps resemble tweezers, with pointed ends. There are two ridges of metal running down the centre of each arm of the forceps for grip. One arm of forceps has a small pin, which fits into a hole on the other arm of the forceps. Engraved text on inner aspect of forceps reads 'YOUNG EDINBURGH STAINLESS STEEL'.'YOUNG EDINBURGH STAINLESS STEEL'surgery -
National Vietnam Veterans Museum (NVVM)
Plaque, 12th TAC RECON SQ
Wooden plaque with gold bordered metal emblem depicting eagle carrying log shaped item in its talons. Brown back ground with gold writing 12th TAC RECON SQ. Small gold plate engraved "To Air Commander Alan R Reed (RAAF). Best wishes 12th TRS 10 OCT 84To Air Commander Alan R Reed (RAAF). Best wishes 12th TRS 10 OCT 84plaque, alan reed, 12th tac recon sqn -
Geelong Cycling Club
Shield, 1967
Geelong West Cycling Club have run track cycling competitions since its inception. This shield represents the importance to the club of track cycling winners.Provides history of track cycling winners at the Geelong West Cycling track and Velodrome between 1967 to 1884Wooden shield with nickel plated small shields attached to the wood. The shield represents the G.A.C.C. Senior Track Aggregate winners for the years 1966-1984. The top of the shield bears a banner in nickel with the name W. Pat Shaw 1967 and the middle of the shield contains another plaque with the words G.A.C.C. Senior Track Aggregate engraved in the plaque."W. Pat Shaw/1967/John Olsen 1966-67/Peter Wood 1967-1968/Brian Carnegy 1968-69/ Brian Carnegy 1969-1970/Rodney Perkins 1970-1971/ Stewart Hocking 1971-1972/John Hine 1972-1973/John Hine 1973-1974/Murray Heyers 1974-1975/ Peter McCaulay 1975-1976/Max Neagle 1976-1977/Noel White 1977-1978/Brett Shelly 1978-1979/John Hine 1979-1980/Doug Libbis 1980-1981/Paul Robertson 1981-1982/Paul Baulch 1982-1983/Wayne Drayton 1983-1984geelong cycling club; geelong west cycling club; w. pat shaw; john olsen; peter wood; brian carnegy; rodney perkins; stewart hocking; john hine; murray heyers; peter mccaulay; max neagle; noel white; brett shelly; doug libbis; paul robertson; paul baulch; wayne drayton; shield; senior track aggregate; 1967; 1984; -
Tennis Australia
Racquet, Circa 1929
A Dayton-built, Wilson Indestructo, wholly metallic tennis racquet, with a wood or cork fibre handle grip wrapped around lower shaft. Strung with piano wire along and across head and open throat. Model and manufacturing details engraved into underside of butt cap. Materials: Metal, Glue, Paint, String, Cord, Wood fibretennis -
Stawell Historical Society Inc
Photograph, Mr Will J. Rees -- a Local Visual Artist
Portrait of Will Rees from Australian Photographic Journal. C1909B/W Photo: Seated sideways wearing spectacles, mustachioed Gentleman in tree piece suit white shirt collar and dark tie and hat. Copy of original photo. c.1909. Original in "The Australian Photographic Journal p.264 22 September 1909.Portrait taken by W.J. Chapman. Engraved by S.W. Bacon and Co.stawell -
The 5th/6th Battalion Royal Victoria Regiment Historical Collection
Plaque - Presentation Plaque, Reconnaissance Platoon 5TH 6TH Royal Victoria Regiment
Delta Company was reformed out of Support Company, of which recon platoon was a part ofShield shaped plaque made of varnished timber with a large badge affixed to its front The badge is a 5/6 colour patch being made up of a black rectangle on top of a red rectangle. Gold eyes and hands appear to be pearing through the bushes in the foregrond. This is the recon platoon logo. Below this badge is an engraved plaque made of brassRecon Platoon Best Section Canungra 20055/6rvr, support company, recon platoon, wark vc club, plaque -
Melbourne Tram Museum
Functional object - Address Plate, Melbourne & Metropolitan Tramways Board (MMTB), 1950's?
Engraved brass address plate, with the words "Melbourne and Metropolitan Tramways Board 616 Lt. Collins St" in capital letters with the word "Melbourne" curved. Has four screw holes in the corner. Could have been used on a correspondence bag, eg for the Post Office or another Authority. Note the MMTB Head Office as at this address post 1938.trams, tramways, mmtb, head office, post office -
Northern District School of Nursing. Managed by Bendigo Historical Society Inc.
Decorative object - Police Assocation Plaque
The Northern District School of Nursing opened in 1950 in to address the issues around nurse recruitment, training and education that had previously been hospital based. The residential school was to provide theoretical and in-house education and practical training over three years. The students would also receive practical hands-on training in the wards of associated hospitals. The Northern District School of Nursing operated from Lister House, Rowan Street, Bendigo. It was the first independent school of nursing in Victoria and continued until it closed in 1989.A wooden shield shaped plaque with an eight centimetre diameter blue and gold coloured insignia of THE POLICE ASSOCIATION VICTORIA which has red and gold coloured crown in the middle. A metal plate six and a half centimetres by two and a half centimetres has engraved on it NORTHERN DISTRICT SCHOOL OF NURSING MANY THANKS POLCE EXAMINATIONS 1980on the back, MADE TO APPROVED SPECIFICATIONS by LEGA PTY LTD 24-26 WILLIAM STREET BALACAVA VICTORIA AUSTRALIA ndns, police association victoria, police examinations 1980 -
Warrnambool and District Historical Society Inc.
Financial record - Journal Town of Warrnambool 1906-1914, Circa 1906
This journal contains entries which relate to the expenses of the administration of the town in the early 20th Century. It contains entries which relate to items such as public works, kerbing and channelling, library and museum, abattoir fees, pure food act, limestone and bluestone road metal and salaries.The entries in this journal provide an overview of expenses and administration costs in early 20th century. There is much information contained in the costs which states when works were completed.Green cloth covered card journal with light brown leather spine and corners. Scrolled brown pattern down edges of spine cover. Edges of pages coloured in green, pink and yellow. Inside front and back covers is coloured light and dark blue. 103 pages. Maroon label on front cover with gold lettering and border. It contains three loose sheets of paper. One dated November 1912 written by H E Lawson calling on subscriptions to support a group to lobby for country interests. A second sheet refers to a poll for a new High School for Warrnambool. The other two sheets refer to voting rights. Journal Town of Warrnambool on front cover. Arnall and Jackson engravers and lithographers, Printers and manufacturing stationers 478 Collins St Melbourne No 96927 9/6/06.town of warrnambool1906-1914, warrnambool history, warrnambool town expenses 1910 -
Warrnambool and District Historical Society Inc.
Tray, Stan Sharkey 1978-79, C 1978
Bushfield is situated on the outskirts of Warrnambool . The local Bushfield recreation reserve has been home to a number of local football and cricket clubs which play in various leagues in the Warrnambool district. Litle could be The Bushfield Cricket club has possibly been combined with another local team It is home to the Woodford Cricket Club which is the closest club to Bushfield and which uses the Bushfield oval as its home ground. It is a member of the Warrnambool and District Cricket Association. We have little information on Stan Sharkey who was obviously associated with the club in the late 1970's.Cricket is an important part of sporting life in Australia and especially in country regions where clubs often form part of the social network of the towns and districts. They rely heavily on the contributions of volunteers such as Stan Sharkey to operate. Many have recorded their histories through the years but nothing could be found on the Bushfield club.Oblong stainless steel tray with rounded corners . It has ornate handles screwed into either end , a raised lip around all sides and a circular brushed pattern on the flat surface of the tray. There is an inscription in the centre of the tray.Engraved in centre of tray," Stan Sharkey. In appreciation of servicesfor season 1978-79. From President & Players Bushfield Cricket Club."Marked stainless steel on back.warrnambool, bushfield, bushfield cricket club -
The Ed Muirhead Physics Museum
DESK CALCUMETER Calculator
The “Standard Desk Calcumeter” consisting of metal rectangular body with six dials and a reset button. Two legs are used to stand Calcumeter at a convenient angle for manipulation..Engraved on front: “The Standard Desk Calcumeter” On side: “77” “120675” On side: “H.N. Morse Trenton N.J.” On long side: “Pat`d Dec.17`01” -
Kew Historical Society Inc
Tool, Moseley & Son, Moulding Plane, 1/8” Beading, 19th Century
In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 1/8”, Beading, Moseley & Son London. Stamped ‘1/8’, and with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘2’ added on entering the collection in 2010.bertie greenwood, woodworking tools, moulding planes, carpentry, burwood road — hawthorn (vic.) -
Kew Historical Society Inc
Tool, Moseley & Son, Moulding Plane, 5/8” Beading, 19th Century
In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 5/8” Beading, Moseley & Son LondonStamped ‘5/8’, and owner name ‘G. Greenwood’ with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘5’ added on entering the collection in 2010.carpentry, bertie greenwood, woodworking tools, moulding planes, burwood road — hawthorn (vic.) -
Federation University Art Collection
Print - Printmaking - Lithograph, Tulloch, David, 'Commissioner's Tent & Officers' Quarters, Forest Creek' by Thomas Ham, 1852
This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Lithograph showing the Commissioner's tent at Forest Creek lower centre "Commissioner's Tent & Officers' Quarters, Forest Creek" lower left side "Drawn By D. Tulloch" lower right side "Engraved by Thomas Ham" art, artwork, ham, thomas ham, david tulloch, forest creek, government camp, goldfield commissioner, tents, gold mining, flag -
Warrnambool and District Historical Society Inc.
Album - Family photo album
The actual history of this object relating to Warrnambool is unknown at this stageSome photos have been identified as local people from WarrnamboolLeather bound. Brown. Engrave with Gold and Black. Ornate scrolled, embossed work on cover with The words The Colonial Family Album on the front, back and spine engraved. Metal locking clasp is broken. 23 pages. Binding in blue tape. Each page is highly decorated changing on each page, facing pages match each other, colours used are gold, red, blue, pink and green. Photos are taken mid 1870's to late 1880's by photographers from Melbourne, Portland & Ballarat. Sepia photos, 20 large frames of men & women, 20 small oval & round topped oblong frames. Collection of Women, Men, Teenagers and children. Each photo slides in from the bottom of frame through a small slot.album. photographs. photographers. ornate art work., warrnambool historical society -
Vision Australia
Photograph - Image, Lifetime, Ronald George trophy : Victorian Blind Ten Pin Association State Championship, 1990-2003
A brown wooden award with a banner engraved 'Ronald George Trophy' at the top of the shield, a large metal plate inscribed 'Victorian Blind Ten Pin Association State Championship' in the middle and 'Donated by Marjorie Goodall' in a banner at the base of the shield. 14 smaller plates, with the year and team winners are located around the middle plate: 1990 Shepparton, 1991 Geelong, 1992 Geelong, 1993 Geelong, 1994 Geelong, 1995 Kooyong, 1996 Geelong, 1997 Kooyong, 1998 Elanora, 1999 Kooyong, 2000 Geelong, 2001 Kooyong, 2002 Elanora, 2003 Kooyong.Wooden shield with 14 mini shields and banners at top and bottomassociation for the blind, ronald george, marjorie goodall, elanora home (brighton), illawarra (geelong), baringa (shepparton) -
The Ed Muirhead Physics Museum
Spectrograph, Double Prism Optical
Double Prism Optical Spectrograph made of standing L-shaped metallic base in grey enamel which supports a brass collimator/telescope abutting a wooden box containing two prisms and camera. Tradition has it that it was designed by Laby but there is no supporting evidence.Engraved on brass cylinder: “Adam Hilger Ltd London England” On end of brass cylinder: “Screw = 5m/m Adam Hilger Ltd London England No. F31.301/25403”