Adzes are used for smoothing or carving wood in hand woodworking. It is similar to an axe but with the cutting edge perpendicular to the handle. It is used chiefly for shaping wood.A square ended adze that has a thin arched blade set at right angles to the wooden handle. The handle is not original.wood-working-tool adze carpentry

Sovereign cases were small portable boxes usually in cylindrical shape and made from various metals with snapshut covers to contain the coin. A white metal Sovereign coin holder with spring-loaded insert with engraved decoration on lidengraved decoration on lidpersonal effects, coins, early settlers, market gardeners, moorabbin, bentleigh, ormond

This darning egg is a plastic egg-shaped object, designed to be inserted into the toe or heel of the sock to hold it in the proper shape and provide a foundation for repairs.Two-tone moulded plastic darning egg.household equipment, darning eggs

Butter pats were common from about 1850 - 1920. They were used to shape the butter into pieces instead of by hand as the butter was soft.Two vintage wooden butter pats, one pale wood with a shaped handle, the other is a dark piece of wood without a handle. Both have ribs on one side for the butter to be shaped.butter, butter pats, kitchen equipment

The maker of this cruet set is unknown. It is a high quality household item and would have been a common item in households of the more affluent homes in the 19th and early 20th centuries. Cruet sets are not used much these days but have usually been replaced by salt and pepper shakers without a stand. This cruet set has no known local provenance but is retained as an example of a household item of the past. It will be useful for display This cruet set consists of a stand, a container for mustard and two containers for salt and pepper. The stand is silver-plated and has a rectangular base with pointed edges and three slots for the containers, one rectangular and the other two square in shape. The handle is riveted to the base with two screws which are now rusty. The base of the stand also has six studs. The silver plating is tarnished in places. The salt and pepper containers are made of cut glass in rectangular shapes and have silver-plated circular-shaped lids. The top of one of the lids has broken loose from the lid. The mustard container is made of cut glass and is rectangular in shape. The silver plating on the lids is wearing away. history of warrnambool, 19th century household items, cruet set

The first sculpture awarded the Shire of Eltham 'Art in Public Places' Award/Commission. The Judges were Inge King, Jenny Zimmer and Daryl Jackson. The work deals with the juxtaposition of suburban and rural surroundings. This scupture is a typical example of the artist's oevre of the period. This sculptre is site specific and refers to the nature of the environment. The colour - bushfire red / sienna - alludes to the history of fire in the urban/rural fringe and the title, as well as the sculpture's shapes, forms and material refer to the natural and local elements. Judges report noted: "The most vital and expressive work for the site...with a great sense of dynamic movement and vibrant colour. Its' abstract forms will enliven the surroundings and the urban and natural environment. This work is the most appropriate for the site and expressive of the dynamics of an evolving community in which artistic discourse and debate has always thrived." The work has acquired the status of a major landmark from the National Trust. The Breeze is an abstract work made out of welded steel and painted in enamel in bush fire red / sienna. It comprises a series of flat, cut-out shapes, interlocking at different angles, giving the impression of being hinged together rather than fixed. The work references nature and the built environment. Its geometric shapes suggest man-made structures within industry and suburban life, while rural areas can be identified by the organic flame-like shapes fanned by the wind. The circular cut-out in the eye mimics the sun, symbolising the intense heat of the Australian climate, while the colour red alludes to the history of bushfire within the urban and rural fringe. N/Apublic art, ginger, red, sienna, elements, steel, abstract, breeze, fire, sculpture

“Greg Westhead" collection Refer Cat. No. 1496.7 for his service details.Banner - mid blue colour fabric in flag shape printed with the flags from many countries, mounted on green coloured cardboard. Above banner there are three badges - metal, gold and silver colour.'' Left to right - Queen's Crown, Laurel Wreath with letters "VRI" on star shape. - Queen's Crown, Laurel Wreath, Crossed swords - Below Badge is a service ribbon, blue and white - NATO. - Queen's Crown, Laurel Wreath with letters "ER", Ribbon shape with letters "ROYAL MILITARY POLICE" Frame - timber, brown stain with decorative moulding. Glass front, MDF board backing. Recessed Box frame. Handwritten information on backing board.Handwritten information - black ink pen. "317595 WO2 G. WESTHEAD ROYAL AUST CORP MILITARY POLICE LONG LOOK 1999 ROYAL MILITARY POLICE 6 RMP REGT BOSNIA JUN-AUG 99"framed accessories, banner, badges, nato, greg westhead

The item is representative of utility pouches in use in the Commonwealth forces in the mid 20th century.Utility Pouch of rectangular web case. Of rectangular parallelepipped shape made of thick and sturdy fabric (canvas). The pouch is of faded olive colour.. Front view - Rectangular shape with overlapping closing flap with a press-stud fastener to maintain closed. Left and right views - Both sides are identical. Made of a one piece of fabric forming the base as well ("U" shape) Back view - Rectangular with metal hooks on the middle part for attachment to a belt. There is a Twigg buckle on the top part of the pouch mounted on another piece of canvass ending in a triangular shape. . Bottom view - ‘the fabric forming the base is also forming the sides of the pouch. Top view - closing flap overlapping on 3 sides and forming part of the back of the pouch. Inside view - The inside of the closing flap contains 3 small inserts (for special ammunition used in the firing of certain rifle grenade). There is excess fabric from the back panel that forms an additional layer at the base of the pouch..Inside of closing flap: has a circular (round) stamp with the arrow symbol. On the inside of the press button stud (closing mechanism) is inscribed 'United xxxxx Canada" (second word is not readable) There is evidence of writing on the internal face of the back flap (just under the connection with the top cover) but it is not readable. pattern 37, webbing

This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” Bottle corker, a hand operated wooden corking device for sealing bottles. Bottle corker has two parts comprising a wooden plunger rod with knob handle, and wooden cylinder containing a metal tube that is flared to a funnel shape on the top. The cylinder has a hole the diameter of the rod at both ends and an oval insertion slot in one side. The tip of the plunger rod is slightly compressed and it has an indented line around the circumference as though it has had something attached to it. Manufactured in the late 1899s to early 1900s in Melbourne.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cork

Cordial was bought at the local general store or at a grocery shop in a near-by city. Bottles belonged to the manufacturer and came in many shapes and sizes with a variety of lids.Historic: Size and shape of bottle The Kia-ora CompanySmall clear glass bottle with white screw-top tin lid. The bottle has straight sides half way up then tapers gradually to the opening. The lid has red writing on the top.On lid: Kia-ora Embossed around bottom of bottle: Kia-ora Not to be Refilled. On base:1/07 in centre. m on one side and 4 on the other, Under the centre: '1080'cordial bottle; kia-ora company

Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Historical: Change of bottles - shape, size, stopper, embossing, use Aesthetic: Display showing embossing, size and shapeClear glass bottle with straight sides three quarters of the way up from the base. It tapers in a little to the opening. There is a lip on the rim.Base: 626dairy, bottle, milk bar, cream, household

This bottle was bought at the local chemist or a chemist in a larger city on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. History of Rawleigh's.Historical: Change of bottles - shape, glass, stopper, embossing, use Aesthetic: Display showing embossing and shape.Clear glass bottle with rectangular base and straight sides three quarters of the way up tapering into the neck and then the screw top opening. The front face is heavily embossed with maker's name signed across the face. The back and side faces are flat while the front is indented and framed with a curved top. The base is embossed and slightly indented.Front side: "I Rawleigh's I" Base: Common seal 'A' with 'G' on top and 'M' underneath inside the 'A', 'G437' and an 'O'chemist, rawleigh's, medicine, glass bottle

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, distant signal, signal, maritime signal, ball signal, signal shape, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Cone, part of a Flagstaff signal set. A woven cane cone, painted black, with a metal rod passing through the centre and two crossed metal bars at the base. The central rod has a loop at the top and passes through the bars at the base, finishing in a metal loop. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal cone, day signal cone, cone signal, cone day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal ball, day signal ball, ball signal, ball day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Cone, part of a Flagstaff signal set. A woven cane cone, painted black, with a metal rod passing through the centre and two crossed metal bars at the base. The central rod has a loop at the top and passes through the bars at the base, finishing in a metal loop. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal cone, day signal cone, cone signal, cone day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.distant signal, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

Each plaque has 4 names on being the winning team for that year. The plaques start 1971 and the last 1981. The Bendigo RSL Sub Branch conducted a Diggers Day Bowls as far back as 1953.Trophy, brown wood rectangular base shape with 3 pillars on top of metallic construction, all are round shape, 2 have a depiction of a bird on top with outstretched wings, the centre shorter one has a depiction of a man playing bowls. The base has a central plaque with a wreath around engraved in the middle. On the left of the base are 10 x small plaques engraved with names on, 1 x small plaque on the right of the base.On centre plaque, "Presented by R.H. Trethewey MLA - Perpetual Trophy - Diggers Day Tournament". Example plaque, "1977 - H. Tobin - W. Smith - P. Weymouth - J. Cruse"brsl, smirsl, diggers day, bowls

The Mount Beauty Senior Citizens' Clubrooms were officially opened on the 8th December 1972.The building was built and owned by the (then) Bright Shire after much lobbying and fund raising by a local steering committee. It has served the community well for over 50 years.This album is a significant reminder of how the community of Mount Beauty was always pro-active in the development of community welfare and assets.Orange Vinyl covered photo album circa 1960s-1970s. Inside the covers are 10 double-sided plastic-covered cardboard pages secured by a metal spirex type page holder. Two gold lines with geometric cornice design border the cover. Four snowflake shapes form a diamond shape embossing in the centre of the cover also in gold. Manfacturer -Advance - Style 101220 inside back cover in gold.mt beauty senior citizens club

Clothing. Curved ''cup-shape'' bodice, unlined, shirred slightly at the centre, and measuring 28 cm deep, from shoulder strap to midriff. A V shaped panel is inserted into the back bodice - 37 cm x 13.5 cm at the top to give a filled effect. Eight covered buttons and loops form the closure at the top of this panel (one button missing). A triangular shape is also sewn into the lower skirt to give flair.costume, female, slim black velvet evening gown

Clothing. A cardboard horseshoe shape, covered in 1.3 cm wide cream textured ribbon. Ribbon is wound round the shape and stitched into position at the open ends of the horseshoe. A small sprig of waxed orange blossom, four buds, and two leaves decorate the horseshoe at the top. A 34.5 cms long loop is attached under the orange blossom, to hang from the bride's arm. this loop is fastened with a bow, just above the horse-shoe.costume, female, wedding horse shoe

Worn for wedding of donor's mother on 26 September 1936. Eric Edward Pearce to Jean Isabelle Mansell at Presbyterian Church, Shepparton, Vic.1936 Cream satin dress with a V neck with pintucking featuring a diamond shape in centre front, also pintucked. Full length full sleeves with cuffs with two buttons and loops. Belt from diamond shaping to centre back panel. Panel opens out to train.|Marriage of Eric Edward Pearce to Jean Isabell Mansell. 26 September 1936 NO3222 Certificate|Wedding photo NP2391|Cake Photo NP2392costume, female ceremonial

This badge represents a period in time when a School Carnival was not only a major School activity but also had a community "spirit" attached to it. It represents the balance between the metal (learning) and the physical (body) development of the student body. This balance of the growing student has been in existence for centuries. Although some students excel in the academic side of schooling others balance this through the sporting/physical side of "school life" This balance is mirrored in the overall Australian society. From the late 1990's the highly lucrative "professional" sports have provided a highly monetary incentive for those excelling in the physical side of society.The Mount Beauty High School has not only provided outstanding academics but also sports professionals. It has and is still producing a cross section of outstanding Australian men and women. Although the local environment (rural) has limited opportunities for further scholastical and professional sporting achievements it is a vital facility in the student's development for the ever changing Australian society. This yellow coloured, round "lapel" badge is made from mild steel (tin). It has a safety pin shaped around a hole and running horizontal it can be pressed into a "U" shaped hole for fastening onto any material (blazer or shirt).On the front of the badge (in smaller green coloured print) and following the round shape of the badge is "MOUNT BEAUTY HIGH SCHOOL". In the middle portion of the badge, and in larger print "CARNIVAL". Below this in smaller print again is "21st MARCH 1970"high school education, metal school badges, school sports

A wax matches' box in the shape of an egg on a mall pedestal. It is made of carved wood and painted red, green and black in a tartan design. It has gold dots down the side and on the base.vestra matchbox smoking personal-effects container

The tipstaff is a symbol of office for the court officical responsible for keeping order in the court, also called the tipstaff. This tipstaff dates from 1826 and is marked with the reign of George IV. This tipstaff was unlikely to have been used in the Supreme Court of Victoria, and is probably an item donated to the court in the 20th century.This is the only item of this nature held by the court, the item because of its age would be quite rare. This rarity makes it of state significance, further research needs to be undertaken with regard to national and international (ie. UK) significance.Painted black wooden baton, with gold leaf inscription. Baton has been shaped to provide a hand grip with three wooden grooves, barrel/cylinder shape at the other end.Painted "Gold Crown/1826/ GR IV/ R. 11"tipstaff, tipstaves, courts, judiciary, wood, supreme court melbourne

Issued to Sergeant Robert G. Jackson posted to Butterworth, Malaysia from 1966-69 as part of field First Aid Kit.Packet in brown in rectangular cubed shape. White paper wrapped around with description of contents written in dark blue writing. Contents of packet one ounce of compressed cotton wool.Written on end and one side "Compressed absorbent cotton wool - 1 ounce"butterworth, medical equipment

Glass bottle - torpedo shape, oval shaped, with painted base and narrow neck. Green coloured glass. Bottle to be stored on its side. Information - markings on side of bottle. British.Information on bottle - "THE PROPERTY OF THE 107th REGIMENT". containers, glass, britain, 107th regiment

The New Zealand College Rifles was formed in 1897 from three Colleges in Auckland as a Cadet Military Unit, members served in South Africa, WW1 & 2. Item in the collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service details.Badge pressed brass, top has a crown with date under over star style shape with central motiff, scroll at bottom with raised lettering, rear has three lugs.On face, "1897, College Rifles Auckland"badges, aucland, nz, cadets

In the 1950s and 60s what we know as netball today was played by women and was known as basketball. No information has been found on this Warrnambool Basketball Association but it is most probable, however, that it was an early organization of men’s basketball teams. The game of basketball, founded in America, has become much more popular in Australia for both men and women in the last three or four decades with the local organization in Warrnambool known as Warrnambool Basketball Inc. and the teams Warrnambool Seahawks and Mermaids playing in a state-wide competition. This badge is retained for display purposes as an example of a sporting badge from the mid 20th century.This is a metal badge in the shape of a shield with gold lettering on a brown background and gold-coloured images of a net and ball on a green background. It has a metal ring at the top for attachment to a ribbon or cord.Warrnambool Amateur Basketball Associationwarrnambool basketball, warrnambool netball, history of warrnambool