Cast Iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.A black and white photograph by Alan Doney of the building at 257 View St in Bendigo. The photo shows detail of the wrought iron on the verandah. alan doney, bendigo, wrought iron

Cast Iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and then poured into molds usually made of sand. The alloys needed a minimum of 2% carbon.A black and white photograph by Alan Doney of the building at 22 Valentine St in Bendigo. The photo shows detail of the wrought iron on the verandah. alan doney, bendigo, wrought iron

Cast iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron",iron ore, was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon. A black and white photograph by Alan Doney of 288 View St in Bendigo. The photo shows detail of the wrought iron on the fence. alan doney, bendigo, wrought iron

Cast Iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.A black and white photograph by Alan Doney of 159 Forest St in Bendigo. The photo shows detail of the wrought iron on the verandah. alan doney, bendigo, wrought iron

Cast iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.Black and White photos by A Doney of House on corner of Mc Kenzie and Short Street Bendigo showing lace ironwork on the balustrade.Photo A Doneyiron lace work, a doney, historical home bendigo

Cast iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.A black and white photograph by Alan Doney of Caretakers Residence Cathedral Short Street Bendigo showing detail of the wrought iron on the verandah. A Doney Bendigoalan doney, bendigo, wrought iron, balustrade

Cast iron lace was made in foundries in most cities. There were 42 such factories in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.Black and White photos by A Doney of bench seats one showing fern detail and the other leaves and flowers.Photo A Doneyiron lace work, a doney, bench seats

CAst iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron"' iron ore, was melted in a blast furnace, mixed with alloys and poured into moulds usually made with sand. The alloys needed a minimum of 2% carbon.Black and White photo by A Doney of Balustrade on property on the corner of Forest and Barnard Streets Bendigo.A Doney Bendigoalan doney, bendigo, wrought iron, forest street bendigo, barnard street bendigo

Cast Iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon. Two black and white photographs by Alan Doney of the Spastic Centre in Don Street, Bendigo. Both photos shows detail of the wrought iron on the verandah. alan doney, bendigo, wrought iron, spastic children's society

Cast Iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore was melted in a blast furnace, mixed with alloys and then poured into molds usually made of sand. The alloys needed a minimum of 2% carbon. Three black and white photographs by Alan Doney of the residence 'Illira' at 57 Forest St, Bendigo. The first photo shows the front of the residence. The other two photos show detail of the wrought iron on the verandah. alan doney, bendigo, wrought iron, illira bendigo

Bullets for early firearms were made as lead balls in iron scissor moulds. The moulds had scissor action, with ends shaped as a hollow half-sphere that formed a ball when the handles closed. Melted lead was poured into a small filling hole in the top of the closed mould. When the lead was set the handles were opened and the ball was released from the mould. Excess lead was trimmed using the cutting edge of the mould. The task of pouring the melted lead into the mould had to be performed slowly so that air pockets didn’t form. The shot would have a join line around it, which would make it inaccurate; the join needed to be carefully filed to make the ball into a smooth sphere. Larger quantities of lead shot were often cast in a multi-bullet mould that was used in a similar way. Lead shot mould; cast iron, scissor type metal object with sphere shaped mould at end used to make lead shot balls for a shotgun. Mould has a cutting edge to trim off excess lead.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, firearms, bullet, cast bullet, lead ball, lead shot, scissor mould

Bullets for early firearms were made as lead balls in iron scissor moulds. The moulds had scissor action, with ends shaped as a hollow half-sphere that formed a ball when the handles closed. Melted lead was poured into a small filling hole in the top of the closed mould. When the lead was set the handles were opened and the ball was released from the mould. Excess lead was trimmed using the cutting edge of the mould. The task of pouring the melted lead into the mould had to be performed slowly so that air pockets didn’t form. The shot would have a join line around it, which would make it inaccurate; the join needed to be carefully filed to make the ball into a smooth sphere. Larger quantities of lead shot were often cast in a multi-bullet mould that was used in a similar way. Lead shot mould; cast iron, scissor type metal object with sphere shaped mould at end used to make lead shot balls for a shotgun. Mould has a cutting edge to trim off excess lead.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, firearms, bullet, cast bullet, lead ball, lead shot, scissor mould

CAst iron lace was made in foundries in most cities. There were 42 such factories in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys a nd then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.A black and white photograph by Alan Doney of Early Nurses House Lucan Street (Bendigo Base Hospital). Now incorporated in portion of present Nurses home A Doney Bendigo - Copyalan doney, bendigo, wrought iron

Cast iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and poured into moulds usually med from sand. The alloys needed a minimum of 2% carbon.Black and White photo by A Doney of sandblasting iron lace work on unknown property in Bendigo. Two internal photos of door and arch ways. Larger photo of balustrade with verandah pillars in backgroundA Doney Bendigoalan doney, bendigo, wrought iron

Plain white china feeding cup, provided with a handle and pouring spout at right angles to each other. There is a scalloped half-cover over the cup to prevent spillage. A Red Cross symbol, surrounded by two red circles, is located on the top. Used in hospitals for feeding invalid or bed-ridden patients.This cup has a Red Cross symbol on the upper surface. The underside of the cup has the following imprint: "92". red cross, invalid, hospital, feeding cup

Diggers & Mining. The Chinese on the Gold Fields. Slide: This cartoon from Melbourne Punch (April, 1857) is entitled ''A Flood of Celestial Light pouring in upon the Diggings''. Slide shows a large group of Chinese travelling to their destination, most of them are on foot. Some onlookers. Markings: 22. Used as a teaching aid.hanimounteducation, tertiary, goldfields

Used by mothers during childbirth, the anaesthetic Trilene (trichloroethylene) was inhaled through a face mask [missing] attached to the rubber tubing [missing] and the vaporising chamber. The Trilene was poured into the chamber to be turned into a vapour. The machine was used in the obstetric wards at University College Hospital, London. Trilene was introduced in the 1940s. The machine was made by Cyprane Ltd.Khaki metal multi layered cylinder. Set on top of khaki metal plate with four (4) rubber feet.Stamped in red on top level of vaporiser: Cyprane Ltd •Stamped in red on serial plate: TECOTA MARK 6 / CHARGE WITH TRICHLOROETHYLENE B.P. / CYPRANE LTD. SERIAL No / KEIGHLEY / YORKS. / T1469 •Clear sticker with red printed text stuck on metal plate: PAT No 646680 / PATENTS PENDINGtrichlorethylene vaporiser, tecota mark 6

Lambert Ormsby was a New Zealand surgeon who migrated to Ireland. He described his inhaler in a letter to the Lancet in 1877.Ormsby listed the advantages of his inhaler as simple, inexpensive, small quantity required to produce sleep, prevents evaporation of ether, portable and small (can be carried in pocket), short time to complete anaesthesia (two minutes) and safe. Disadvantages of this apparatus were that it had to be removed in order to recharge the sponge with ether or when anaesthesia becomes too deep. Considerable carbon dioxide accumulation developed and there would also be some oxygen lack. In thirty years of use, Ormsby's Inhaler underwent certain modifications, an exhalation valve was fitted to the mask and device for recharging the sponge with ether was later added. The Ormsby inhaler was modified by Carter Braine in 1898 with the aim of making it easier to clean. Essentially it is very similar except there is no net around the bag.The inhaler consists of an india-rubber flexible bag enclosed within a net bag to limit expansion. There is a soft metallic mouthpiece with india-rubber tubing around the edge. The tubing had to be purchased separately from the manufacturer. The body contains a wire cage with a similarly shaped hollow sponge into which ether was poured.Maker's details inscribed into metal ring around the bore: Barth Co. London.ormsby, new zealand, carbon dioxide, carbon accumulation, carter braine, portable

Track repairs in Wendouree Parade, June 2014. 6024.1 - Pouring concrete 6024.2 - ditto 6024.3 - ditto 6024.4 - the scene from Wendouree Parade 6024.5 - ditto 6024.6 - Barry Richardson trowelling off 6024.7 - Reece Carter inspecting 6024.8 - Richard checking the roadway out 6024.9 - Trowelling offPhoto by Peter Waugh, collected for reference purposestrams, tramways, road works, btm, track repairs, wendouree parade

Crucibles are used for heating and pouring molten metal. The set of six crucibles was raised from the wreck of the Loch Ard and includes a range of sizes, now in the Flagstaff Hill collection. All were manufactured by the Morgan brothers who founded the Patent Plumbago Crucible Company in 1856, making crucibles in a small factory in Battersea London. A crucible is a container used for purifying and melting metals so that they can be cast in a mould to a predetermined shape and use. They must withstand extremely high temperatures, and abrupt cooling, and shed their contents with minimal adherence. The addition of graphite to the traditional firing clays greatly enhanced the durability of industrial crucibles this technique was pioneered by the Morgan Bros thereby making a significant technological advance in foundry technology and metallurgy. The Morgans first noticed the advantages of graphite crucibles at the Great Exhibition held in London in 1851. Initially, they contracted to be sole selling agents for the American-made products of Joseph Dixon and Co. from New Jersey, but in 1856 they obtained that firm's manufacturing rights and began producing their graphite crucibles from the South London site. The Morgans imported crystalline graphite in 4-5 cwt casks from the British colony of Ceylon (now Sri Lanka) and mixed it with conventional English (Stourbridge) clays to be fired in kilns. Their products were purchased by the Royal Mints in London and India and exported to official mints in France and Germany. They were successful exhibitors of their crucibles and furnaces at the London Exhibition held in 1861 (Class 1, Mining, quarrying, metallurgy and mineral products, Exhibit 265, Patent Plumbago Crucible Co). The range of sizes represented by the six crucibles retrieved from the Loch Ard suggests they may have been part of a sample shipment intended for similar promotion in the Australian colonies or at Melbourne's International Exhibition to be held in 1880. A newspaper account of an 1864 tour of the Morgan brothers' 'Black Potteries' at Battersea indicates: "All the pots were numbered according to their contents, each number standing for one kilogram or a little over two pounds; a No. 2 crucible contains two kilograms; a No. 3, three kilograms, and so on." These numbers are obscured by marine sediment on three of the crucibles in the Flagstaff Hill collection, but those legible on the remaining three are 5, 6, and 8. None of the six is of the same size. A brief history of the Loch Ard (1873-1878): - The sailing ship Loch Ard was one of the famous Loch Line of ships that sailed the long voyage from England to Australia. Barclay, Curdle and Co. built the three-masted iron vessel in Glasgow in 1873. It had sailed three trips to Australia and one trip to Calcutta before its fateful voyage. Loch Ard left England on March 2, 1878, under the command of recently married, 29-year-old Captain Gibbs. It was bound for Melbourne with a crew of 37, plus 17 passengers. The general cargo reflected the affluence of Melbourne at the time. Onboard were straw hats, umbrellas, perfumes, clay pipes, pianos, clocks, confectionery, linen and candles, and a heavier load of railway irons, cement, lead and copper. Other cargo included items intended for display in the Melbourne International Exhibition of 1880. The Loch Ard had been sailing for three months and was close to its destination on June 1, 1878. Captain Gibbs had expected to see land at about 3 am but the Loch Ard ran into a fog that greatly reduced visibility and there was no sign of land or the Cape Otway lighthouse. The fog lifted at 4 am and the sheer cliffs of Victoria's west coast were much closer to them than Captain Gibbs expected. He tried to manage the vessel but failed and the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. The top deck loosened from the hull, and the masts and rigging crashed down, knocking passengers and crew overboard. The lifeboat was launched by Tom Pearce but crashed into the side of Loch Ard and capsized. He clung onto its overturned hull and sheltered under it. He drifted out to sea and the tide brought him back to what is now called Loch Ard Gorge. He swam to shore and found a cave for shelter. A passenger, Eva Carmichael, had raced onto the deck to find out what was happening and was confronted by towering cliffs above the ship. She was soon swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He swam out and dragged her to the shelter of the cave. He revived her with a bottle of brandy from a case that had washed up on the beach. Tom scaled a cliff in search of help and followed some horse hoof prints. He came from two men from Glenample Station, three and a half miles away. He told the men of the tragedy and then returned to the gorge while the two men rode back to the station to get help. They reached Loch Ard Gorge and took the two shipwreck survivors to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland by steamship. In Melbourne, Tom Pearce received a hero's welcome and was presented with a medal and some money. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost her family in the tragedy. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck of which the subject items are a small part. The collection's objects give us a snapshot of how we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. Through is associated with the worst and best-known shipwreck in Victoria's history.This crucible is the smallest of three nested crucibles, or fluxing pots, numbered according to their size. These containers rise slightly from a smaller flat base to a wider open top with a lip for pouring. They were recovered from the wreck of the Loch Ard. The crucibles have a coating of sediment that obscures some of their numerical specifications of size and capacity. Made by the Patent Plumbago Crucible Company at the Battersea Works in London. The number on this crucible is obscured by the sticker.Stamped into side "MORGAN'S PATENT" Stemped into base "MORGAN'S PATENT" "THE PATENT PLUMBAGO CRUCIBLE COMPANY" Sticker "L 96"flagstaff hill, warrnambool, graphite crucible, plumbago crucible, morgan's crucible company, loch ard, morgan potteries, crucible, fluxing pot, nested crucibles, heat proof container, metal worker, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, morgans crucible company, flagstaff hill maritime museum and village, fluxing pots, morgan’s patent, morgan brothers, patent plumbago crucible co, battersea works, london, loch ard gorge, port campbell

Digital image of the Bendigo scrubber, at the Garden Gully loop with a track worker pouring oil into the point blade. Note the water column in the background. Photo by John Ward 23 March 1970 Slide title "00770 230370 SEC Sprinkler maintenance tram ex 22 in Eaglehawk Rd suburban Bendigo Vic"trams, tramways, bendigo, scrubber tram, garden gully loop, tram scrubber

A washstand was a standard piece of furniture in many Victorian bedrooms. On it stood a jug of cold water, a bowl, and a clean rag. The person washed first thing in the morning, immediately after rising. Most bedrooms were cold, chilly places, especially as the sash windows were kept open at the top and bottom (regardless of weather) to allow good ventilation and reduce the risk of illness. This meant in winter most people kept their nightclothes and worked on one part of their body at a time. The art of a stand-up wash was to pour water into the bowl. The soaked flannel was then rubbed on each part of the body, and rinsed. Once the water became too soiled it was discarded into the slop bucket and more water poured into the bowl. Working methodically, all of the body was cleaned, with each part being scrubbed and dried before moving onto the next bit. This wash bowl and jug are typical of the equipment used for personal bathing 19thC and early 20thCA large bowl and jug used in the bedroom for personal hygiene 19thC personal hygiene, water pitchers, jugs, bowls, porcelain, moorabbin, bentleigh, cheltenham

The coal scuttle was used for holding and carrying a small supply of coal which would be used in an indoor coal-filled stove or heater. The top is slanted which allows the coal to be poured onto the fire. This particular type was also referred to as a Dutch copper scuttle due to the blue and white Delft-style Dutch porcelain handles on the top and back of the scuttleLarge Victorian-style brass or bronze coal scuttle with blue and white ceramic hand grips and lion adornments at handle attachment points churchill island, coal scuttle, dutch copper scuttle

Elvis resumed pouring the rainmaking powder onto the clouds and the Dogtor could not loosen the logs that were blocking the creek bed. Because the Dogtor had been so nice to Elvis, in the end, Elvis helped the Dogtor dislodge the logs and the flood subsided. But Crafty Carson Carpetbag and Old Man Redback lay waiting, scheming, planning their next nasty surprise.The Flying Dogtor" series was broadcast on Australian Television Network (later becoming the Seven Network) between February and April 1964 (see item D254 for schedule).Typewritten, carbon copy, foolscap, 2 pagesthe flying dogtor, robin boyd, crawford productions, manuscript

Donated by N. M. & J. D. Archibald. April 1973Black & White Photograph. Chicory Kiln. Rhyll - Mr. P. Forrest, Snr. Poured cement with wooden structure at front. Mr. Bob Jeffery & Mr. Alex Jenner helped in building in 1944. Operated up to about 1962. Elevator sold to Mr. John Neely and later to Mr. Bert Grayden. Chicory Kiln Album.local history, photography, photographs, agriculture buildings, historic, chicory kiln, rhyll, phillip island, p forrest snr, bob jeffery, alex jenner, john neely, bert grayden, n & j archibald

In 1857 at the height of the gold rush, with people pouring into Central Victoria from all over the world, three brothers from Denmark – Moritz, Julius and Jacob Cohn – founded a small cordial factory in the booming town of Bendigo. They went on to build an empire and, through introducing lager, which is served cold, to the country, changed the drinking preferences of Australians. (Ref. Culture Victoria)A pale green clear glass codd neck marble bottle with a glass marble inside. It is seamed and has four dimples on the shoulder. It is indented to hold the marble. On side: lengthwise on both halves base at bottom on both halves COHN BROS LTD 5 BENDIGObottle cohn-bros bendigo cordial beverages

Ron White owned these jugs during his lifetime. Popular circa 1940s.Ron White owned these jugs. See KVHS 12821. Water Jug - tall glass jug with thin pale green 'plastic?' 'coating' wrapped around it. The cover has painted in colour -flowers and leaves. The lip is wavy with a clear plastic cover pulled over it. The handle is attached to the top half in the shape of an ear.The base is wider than the the top.Handblown. 2. Milk Jug - Unusual shaped small rectangular cream coloured jug with a handle at one end and a pouring lip at the opposite end. It sits on a four legged base and is decorated with coloured flowers and a cottage on each side. 3. Shaving Jug - Solid ceramic cream coloured jug with 7 holes in main area with a handle on one side and a pouring lip on the other. The jug is decorated with 3 small pictures of the countryside. The lip of the jug is defined in blue.1. Nil 2. At the base: "Hampton/ Ivory/ Swinnertons / England" 3. At the base: "Empire / Ivory ware/ England" and embossed also at the base "261 / England / 12?"ron white, ceramic and glass jugs, kitchenware, bathroomware

The item was donated by Dr K McCaul of the Royal Women's Hospital, Melbourne, in 1966.Anaesthetic trilene was administered to the patient via rubber tubing from the Trilene inhaler, within which the anaesthetic was converted into a vapor. The cylindrical metal apparatus sits atop a flat, square stand with four black rubber feet. Item includes ports and valves for connection to a face mask and vaporising chamber, as well as mask attachment and metal pouring jug with spout.Red markings identifying the manufacturer and the measurement scale are located on both the stand and top twist dial. The base of the mask attachment piece is inscribed with the manufacturer's details: 'Cyprane Ltd'. The metal beaker is engraved with a line marked at the 15cc level. trilene inhaler, tecota, anaesthesia, beaker, mask, vaporise, obstetrics, childbirth, dr k mccaul royal women's hospital melbourne, 1966, vapor, face mask, vaporising chamber, cyprane ltd, keighley

Dark copper, possibly lacquered, jug with lid and handle but no spout. Body has horizontal bead around centre and two vertical beads. Globular shaped body with cylindrical neck. Lid is domed and internally fitted with a small arched handle on top. Rounded pouring handle which has been reinforced, on side of the jug connected to the body and neck."Q" imprinted on handled.containers, domestic, container, jug, kitchen, oil?