Showing 439 items
matching peg
-
Stawell Historical Society Inc
Photograph, Wettenhall Family from Carr's Plains
-1 Mingawalla House via Callawadda -2 Carrs Plains 1949, Hubert Wettenhall , Jack Cunningham, Peg Moodie, Charles Moodie , Bill Cunningham, Christine Moodie, John Cunningham, Arthur Cunningham, Richard Moodie, Warwick Moodie -3 Carrs Plains Feb 1938. Jack Cunningham, Mollie Wettenhall, Hubert Wettenhall, Pat Wettenhall, Herbert Wettenhall & (Mr Ray Holmes, Teacher at Dadswell’s School -4 Family Gathering at Carrs Plains about 1940. L-R Back. Patricia Campbell, John Campbell, Barbara Cunningham, Peg Wettenhall, Jack Cunningham, Hubert Wettenhall, Front, Dad (Herbert Wettenhall) with Bill Cunningham & Mother (Mary or Molly Wettenhall), -5 Family at the Bolangum Ranges Picnic 1920’s -6 Jack Cunningham in Voluntary Defense Corp St Leonards 1943 -7 Jack Cunningham in Voluntary Defense Corp St Leonards 1943 -8 Madge Anderson, Barbara Cunningham, Bill & John Cunningham at Stawell Station about 1944 -9 Barbara Cunningham in St Leonard’s property Garden. May 1937 -10 John Campbell Mingawalla via Marnoo c 1940 Bulldog Tractor SEries of 1o smallish B/W Family PhotographsNames on Back -
Bendigo Historical Society Inc.
Domestic Object - JAMES MURRAY AND CO. ONE HANDED CLOCK
Wall clock in a round cedar case with a single black stationery hour hand and moving brass dial, black Roman numerals surrounded by a brass outer ring with a stippled look, brass bezel painted black with flat glass, 1 side and 1 bottom inspection doors, top hook for hanging, front of clock secured to case with wooden pegs. Brass pendulum with bob. Time only Fusee chain driven movement. Dial engraved 'James Murray & Co Inventors Melbourne & Royal Exchange London.James Murray & Co Inventors Melbourne & Royal Exchange Londonhorology, clocks, one handed, horology-clocks-james murray & co -
Bendigo Historical Society Inc.
Document - LONG GULLY HISTORY GROUP COLLECTION: THE IMPERSONATOR OF PEG-LEG GULLY
Copy of a newspaper article titled The Impersonator of Peg-leg Gully, The Woman of Many Wives by J P Quaine. Article mentions Edward De Lacey Evans who successfully impersonated a male and was married at least three times. After a head injury Evans was admitted to the Bendigo Hospital as a lunatic and remained for some weeks without arousing any suspicions. The secret was discovered when transferred to a Melbourne Institution. After improvement she returned to the Bendigo Hospital until she was well enough to leave the colony.bendigo, history, long gully history group, the long gully history group - the impersonator of peg-leg gully, j p quaine, edward de lacey evans, monarch of the ocean, bendigo hospital -
Bendigo Historical Society Inc.
Document - NEW CHUM LINE OF REEF - GOLD PRODUCTION ON THE NEW CHUM LINE OF REEF
Hand written page containing the names of mines and the number of ounces of gold they produced. Mines mentioned are: Lansell's 222, Lazarus New Chum, Old Chum, New Chum & Victoria, North Old Chum, Lansell's Big 180, Victoria Quartz, Gt Central Victoria, Victoria Consols, South Adventure Group, Adventure, Advance, Try - Me - Well, Prince Alfred, Alfred Co, Lansell's 83 and Ironbark (no production figures). Note beside Alfred & Co - Land pegged by J R Evans in 1857.document, gold, new chum line of reef, new chum line of reef, gold production on the new chum line of reef, lansell's 222, lazarus new chum, old chum, new chum & victoria, north old chum, lansell's big 180, victoria quartz, gt central victoria, victoria consols, south adventure group, adventure, advance, try - me - well, prince alfred, alfred co, lansell's 83, ironbark, j r evans -
Kew Historical Society Inc
Leisure object - Board Game, Solitaire: The well-known game, 1950s
Solitaire is a game for a single player that is played with pegs or marbles on a wooden board. The game consists of 32 marbles and a wooden board with 33 dents in it. The game is set up by placing 32 marbles in 32 dents, leaving the centre dent empty. The aim of the game is to remove every marble except one – and the last one must end up in the centre dent.To remove a marble, you have to move one marble over another marble, landing in an empty dent. Marbles can move up, down, left or right but never diagonally.Plain cardboard box with colourful graphic design of the game on the lid. The box encloses the round wooden playing board while the plastic marbles are contented in plastic wrapping in their own compartment. A note in pencil on the lid of the box, written by the donor, notes that three of the 36 marbles are missing.Label on box: "SOLITAIRE / THE WELL_KNOWN / GAME / Full Instructions Enclosed / Made in Germany"board game, games and puzzles, board games -- solitaire -
Churchill Island Heritage Farm
Tool - Strop
This horse hide strop was traditionally used to sharpen and polish straight edged razors, although it could be used for kitchen knives or chisels. The metal loop was designed to be hung onto a nail or peg, and the person held onto the handle and pull the strop taut. The razor was sharpened by drawing the spine down along the strop, so no pressure placed on the blade. Once the razor reached the bottom of the strop, it was flipped and drawn upwards. This process required skill, although it could be done at a great speed. Keen Kut was an American brand that sold razors, strops, and safety brands. Double sided, two strips. Metal ring one end, padded stitched handle at other. Horse hide.KEEN KUT /GENUINE HORSE HIDEchurchill island, strop, horse hide, tool, kleen kut -
Tennis Australia
Lawn tennis set, Circa 1890
A wooden chest (.1) containing lawn tennis and badminton equipment, specifically: a badminton net (.2); a tennis net (.3); net posts (.4 - .5, 3 parts each); guy ropes (.6 - .7); rope (.8); pegs (.9 - .12; and, a mallet (.13). Orange and white print across inside of lid features inscription: THE GAME OF/LAWN TENNIS. A sticker adhered above reads: FURNISHING [...IRO]NMONGER/JAMES HAWKINS/35 HIGH STREET/TUNBRIDGE WELLS. Materials: Wood, Metal, Lacquer, Cord, Ink, Paper, Ropetennis -
Bendigo Historical Society Inc.
Newspaper - JENNY FOLEY COLLECTION: DEMURE
Bendigo Advertiser '' The way we were'' from 2002. Demure: all dressed up for the 3BO ball on October 8, 1941, are; back row: Rose Crossman, Elaine Boyd, Lillian Barker, Doris Harvey, Shirley Gray, Dorothy Rudd, Norma Young, Jean Harvey, Georgina Allen and Peg Browning. Middle row: Jean Fitzpatrick, Teresa Gallagher, Betty Swenwy, Pam Dodd, Mrs Dodd, Ella Martin, Lorna Scott, Joyce Hosking and Pat Hodge. Front row: Mary Jacobs and Maureen Minnard. The clip is in a folder.newspaper, bendigo advertiser, the way we were -
Bendigo Historical Society Inc.
Newspaper - JENNY FOLEY COLLECTION: SCHOOL'S IN
Bendigo Advertiser "The way we were" from Tuesday, June 22, 2004. School's in: Bendigo's School of Mines in the 1940s provided the venue for a number of training classes. This group of women were undertaking a turning and fitting class, as training for employment at the Bendigo Ordnance Factory. Back row from left: Isabel Widmar, Peg Bourke, Marje Harris, Mary Fittis, John McCormick, Mollie Reed, Dorothy Holmberg and Isabel Rosewarne. Front row: Gladys Evans, Rose Crossman, Ida Murphy, Betty Harreton, Joan Cousins and Dulce Box.newspaper, bendigo advertiser, the way we were -
Federation University Historical Collection
Booklet, Ballarat School of Mines, Student Magazine, First Term, 1908
Table of Contents: The location and pegging of a tramway route, The unity of things, Students' third annual dinner, The transmission of power by rope driving, Visit to the Briseis main and new brothers home, School of Mines' sports committee, School of Mines' magazine committee, Diabolo, Limericks sluiced at Snake Valley, Obituary, Hints to the inexperienced, Fossilistic love, Past students, Some bunsen memories, Quaint and curious coincidences, Notes on analytical chemistry, New students, News and notes, Students' library, Sports and pastimes, School of Mines' annual dinner, Correspondence, Answers to correspondents, Editorial notes. Images.Booklet of 26 pages.pegging a tramway route, transmission of power by rope driving, briseis main and new brothers home, diabolo, snake valley, obituary, analytical chemistry, students' library, john brittain, a. e. c. kerr, w. smith, l. seward, leslie coulter, t. williams, f. treloar, whitington, hart, murphy, o. w. williams, l. knight, w. kingston, g. w. sides, w. gelard, w. t. sayer, s. r. white, a. c. hesselmann, r. j. moore, r. g. walker, j. a. peart, newton g. king, w. e. eyres, g.h davenport, a. d. r. galloway, j. e. b. crossley, j. smart, h. hylton, j. blayney, t. lennon, h. s. sheppard, p. c. osbourne, c.w. nash, les smith, w. b. tucker, c. w. white, a. j. robin, h. f. owen, l. a. westcott, e. m. boyer, ernie strick, isadore wittowski, m. tyler, h. m. conran, h. g. conran, h. g. cornell, l. j. middleton, j. d. orr, j. r. blight, w. g. taylor, l. hall, c. bult, g. o. ramsay, o. w. williams, stanley r. heron, john a. grant, william t. sayer, frederick l. treloar, patrick s. anderson, robert mitchell, frederick j. martell -
Kiewa Valley Historical Society
Badge Girl Guides, circa mid to late 1900's
This commemorative badge identifying the wearer as a Girl Guide and was used in the 1970's and later. The Girl Guides "World Camps" was founded in 1924 and each subsequent "camp" was in other global countries. The Camp Baree was held in 1947/1948 in Pennsylvania in the USA. In Victoria, Australia, a Barree Regional location for Girl guides, encompasses the Kiewa Valley and its regions. Girl guides in rural areas covered the same developmental programs as in the city areas but the bush settings of annual camps did not have the same impact as for city based guides. The comradeship however, bringing together girls from a widely diverse background, was still a very important objective of the Girl Guide movementThe significance of this badge is that the Girl Guides held a World Camp in the Barree region which included the Kiewa Valley.This world wide attention(Girl Guides) to this region paid special attention to the "home side" girls and highlighted in particular those girls in the Kiewa Valley who participated in the Girl Guide movement. The ability to have such a personal contact with so many girls from so many world regions helped to break the somewhat isolated regional life. The fundamental lessons of the girl guides was and still is to enrich young girls knowledge of skills which provides self esteem, pride in achievements and the togetherness with like minded girls. Social barriers are left behind and good friendships are formed. Some of these friendships continued as life long links.This round badge made from brass and has coloured enamel sections outlining various "Barree Region" scenery. In the far distant horizon are snow capped mountains. These are coloured brown with white tipped summits.The central focus is a blue stream with a dark blue "gum" tree to the left and a brass etched tent pegged onto green grass. These pictures are framed within a house structure. A red coloured boomerang lies under the "house" frame with the name of the region on it,"BARREE REGION" The badge is fastened onto a lapel or other clothing by two "L" shaped hooks extending from the back of the badge.On the front of the badge (on the sketched boomerang "BARREE REGION". On the back in raised lettering is"BERTRAM BROS MELB."societies, girl guides, barree region, metal identity badges -
Bendigo Historical Society Inc.
Newspaper - ANZAC COLLECTION: NEWSPAPER CLIPPING RE ENLISTMENT FOR WWI, 2nd August, 2014
Newspaper clipping Bendigo Advertiser Saturday August 2 2014.Articles of friends who enlisted for WWI together. Private George Every, son of W. H. Every enlisted in July 1915, and sailed for Egypt in January 1916, and his imminent return home wounded. Private S. H. R. Elliott No. 782, K.I.A. April 25 1915, aged 28 years. Son of the late Mr. & Mrs George Elliott of Peg leg Road Eaglehawk, enlisted in August 1914 and embarked from Melbourne. N. S. Draper enlisted at the same time. Sydney Elliott was a member of the Eaglehawk Fire Brigade, Rifle club and was chosen to do sniping duty. G. Of the Loyal Catherine lodge, M.U., Odd fellows band , Comrade's class connected with the Eaglehawk West Methodist Sunday School, Church Choir ,Lawn party , and the swastika club, esteem of the Eaglehawk mechanics institute, Foundry man at the Austral Drill foundry at Eaglehawk. He had one sister, Mrs W. Graham, of Peg leg Road and five brothers - Messrs George & Abe, Bootmakers of Eaglehawk, Fred of Vine Street Bendigo, William of Farnsworth Street Eaglehawk,Stanley of Eaglehawk, and well know in musical circles and as choirmaster at St. Pauls Church Bendigo.military, world war 1, bendigo soldiers -
Ringwood and District Historical Society
Photograph, Ringwood Bowls Club- Ladies A2 Section 5, Section Winners, 1998-99
Coloured photograph"Written on back of photograph" Back Row- L to R: Mabel Bartling, Shirley Pearce, Joyce Clayton, Betty Edsell, Nell Mathison, Dorothy Douglas, Val Walton, May Simpson, Avis Holliday, Robyn Jansen, Eileen Aanensen, Bettye Wilson. Front Row- L to R: Maureen ?, Margaret Round, Vera ?, Peg Mathews, Bev Clarkson, ?, June Boyd. Section winners, A2, 1999. Promoted to A1 for the first time in eight years. -
Shepparton RSL Sub Branch
Sniper shield, c. 1910s
This sniper shield may have been used by German troops during the First World War. There are few other examples of sniper shields of this shape or style, so it was possibly not a widely used design.Metal sniper shield constructed of a large flat front with curved edges, onto which a handle-like piece is soldered on one end and bolted on another. This handle has a pin which presumably adjusts the height/angle of the shield in relation to the ground. The third piece of the shield is a stand with a curved end, presumably rests on the ground, and on the other end a series of five holes which adjust the height/angle. The shield itself is roughly square in shape with a rectangular cut out off-centre at the top and a larger rectangular cut out at the base, which forms two pointed ends, possibly for securing into earth like a peg."G-01" is inscribed in ink, a registration number rather than historic inscription.germany, first world war, world war i, world war 1, the great war, sniper, firearm -
Tennis Australia
Lawn tennis set, Circa 1885
A wooden chest (.1) containing lawn tennis equipment, specifically: racquets (.2 - .3); net (.4); net posts (.5 - .6, 2 parts each); and a pair of pegs (.7, 2 parts). Inscription across the top of the lid, in French: JEU DE LAWN TENNIS. Inscription below features manufacturing details. Lithographic print on inside of lid features a mixed doubles match, in a park, with inscription: JEU DE TENNIS. Handwritten inscription across front of box: TENNIS 3 11 *POUND* 45. Materials: Wood, Metal, Lacquer, Cord, Cloth tape, Ink, Gut, Papertennis -
Yarra Glen & District Historical Society
Black and white photographs, Flood waters in Yarra Glen December 1934
Black and white photograph of Bell street, Yarra Glen, taken in December 1934 from the tower of the Grand Hotel, looking south towards the railway crossing, during the floods. The Victoria Hall is the building in the centre of the photograph. Directly behind the Victoria Hall, the roof of 'River View' guest house can be seen. The Shell Garage, operated by Les Orenshaw, on the left of the photograph was originally built and occupied as a peg factory.The view extends from Bell street across the river flats with the high ground of Chateau Yering in the background. Bell Street is defined by the street trees where the water covers the road in the foreground grand hotel, victoria hall, bell street, floods 1934, 1934 flood, railway crossing, river view, guest house, shell garage, peg factory, river flats, chateau yering, les orenshaw, street trees -
Warrnambool and District Historical Society Inc.
Clock, Wall Clock, Late 19th century?
This clock has no known provenance but has been in the Warrnambool and District Historical Society collection for many years. This clock is a good example of a 19th century (or perhaps early 20th century?) wall clock and is an attractive display item. This is a wooden- frame clock for hanging on a wall. The face is tin painted cream with some paint missing. The numbers on the face are Roman numerals and the hands have Maltese crosses at the ends and are painted. The face is inlaid with 6 small circular dots of mother-of-pearl and there are seven similar inlaid circles on the wooden base. The glass covering the dial is hinged and brass-edged. The wooden base has fretwork and scroll sections and carved decorative edges and a rounded bottom. One side piece of the decoration is missing. The fretwork piece opens to show a brass pendulum. At the back of the clock are two pegs and a metal clip for hanging the clock. ‘Phillip Hunter & Co. London’ history of warrnambool, wall clock -
Federation University Historical Collection
Slide, Welcome Stranger Monument, c1970
The first recorded discovery of gold in Moliagul was in September 1852 and, before long, the area was flooded with over 4,000 miners. Two of those miners, John Deason and Richard Oates, had arrived in Bendigo in 1954 seeking their fortune. After eight years of little success, the friends moved to Moliagul and pegged a puddling claim. On 05 February 1869, Deason discovered a nugget near the roots of a tree, just 3cm beneath the soil. With the help of Oates, he uncovered the largest recorded alluvial gold nugget – known as the Welcome Stranger. The 61cm x 31cm nugget was taken to Dunolly to be measured on the bank’s scales, however at 69kg the gold needed to be broken on an anvil to actually fit on the scales.Photograph of the monument for the Welcome Nugget, a large gold nugget found by John Deason and Richard Oates at Moliagul.Obelisk inscription Welcome Stranger Nugget On this spot the largest nugget of gold in the world was discovered on the 5th February 1869 by John Deason and Richard Oates. Weight 2316 oz, Value £9553 Erected by the Mines Department 1897 Henry Foster Minister of Mines, D. J. Duggan M.L.A. Member for Dunollywelcome nugget, welcome nugget monument, john deason, richard oates -
Surrey Hills Historical Society Collection
Book, Voices and stories from many lands: a century of change in Boroondara, 2001
Stories of the backgrounds of a cross-section of City of Boroondara residents focusing on how they came to live in Australia and in the City of Boroondara in particular. Many were based on oral histories. Commissioned by the City of Boroondara, the team behind "From Many Lands" also received a Local History Award, which allowed them to mount a small touring exhibition. Two Surrey Hills people contributed to the book: Margaret Grossman (nee Sarovich) and Zdzislawa (June) Wasylkowski; photo of Walter Ives also included. Sue Barnett interviewed June Wasylkowski; the interview is part of the Surrey Hills Historical Society collection. Both Margaret (Peg) and June were members of the Surrey Hills Historical Society. Martin Foot was a Council staff member at the time of publication.H 24.7 cm(ms) ruth mclean, (mrs) margaret grossman, (miss) margaret sarovich, (mrs) zdzislawa june wasylkowski, immigrants, oral history, boroondara, (mr) walter ives, sue barnett, june wasylkowski -
Warrnambool and District Historical Society Inc.
Scout's Hat, Mid 20th century
This hat is one worn by members of the Boy Scouts. Warrnambool today has two Boy Scout groups and Allansford has one. The Warrnambool Tooram group has halls at the corner of Banyan and Timor Streets and in Otway Road and the Warrnambool Norfolk group has its headquarters at the corner of Kepler Street and Raglan Parade. This hat is of interest as an example of the hat worn by scouts in Warrnambool in the 20th century. The same type of hat is still worn by Boy Scouts today. This is a khaki felt hat with a wide brim The crown is folded in 4 sections with four eyelets. There is a brown leather band around the crown and a silver-coloured buckle and two silver studs. The band is adjustable and a piece of string with a knot is used for adjusting the chin strap and for hanging the hat on a peg. The chin strap is made of plaited leather and the inside is slightly stained. The hat is slotted into a wooden frame made of varnished plyboard. The frame is U shaped with two straight sides. A smaller added section of plyboard has been placed on top of the frame and this has an opening at the top to allow the hat brim to slot into the frame. This frame appears to be home-made. scouting in warrnambool, history of warrnambool -
Dutch Australian Heritage Centre Victoria
Cigar Mould (Sigaren Plank), early 20th Century
Dutch cigar industry was prominent in the eastern part of Noord Brabant in towns like Helmond.Dutch colonial history. Cigar smoking was popular amongst Dutch men5784(a) and 5784 (b) are two pieces made of wood (presumed to be pine). 20 slots to mould the cigars. Bottom piece has deeper slots for the cigars. The two pieces are not solid pieces of wood. The bottom piece is made from two boards/pieces of wood stuck together with aeration space left in between. The top piece has 20 individual moulds/slot glued on. The two pieces can be locked in via three wooden pegs into their corresponding slots On the back of the lower board/piece - there are two holes lined with metal rings (diameter of 1cm) Note that the size given applies when the two pieces are fitted together.On the top board - There is stamped the numeral "53". To the left of this number, we have the manufacturer's circular logo with details - L. Bezemer & Zn. N.V. Helmond Holland PERLU-VORM In front on the left-hand corner of both halves - etched number "7298"cigar, industry -
Bendigo Historical Society Inc.
Photograph - EAGLEHAWK BOROUGH BRASS BAND 1896
Sepia photograph of brass band, (mounted on cream board with printed red border). Band on oval (paddock) with scattered trees and fence in background. Twenty adult males, two boys in group. Six kneeling, seven seated and remainder standing with various instruments with drum inscribed BBB 1896. Inscriptions: on front - 'GP37'. Back - J ? Oswald, 53 Peg Leg Road, Eaglehawk. On back, rubber stamp 'Royal Historical Society of Victoria, Bendigo Branch'. History: (HJG Biggs) Borough Brass Band 1896, Eaglehawk. Eaglehawk Borough Brass Band in 1896 with its preponderance of Cornish members (BHS Inc). Previous Acc. No. GP 37.person, group, band -
Flagstaff Hill Maritime Museum and Village
Tool - Wood Smoothing Plane, Late 18th to Early 19th Century
A block, jack or smoothing plane is used for making a smooth finish to timber that is used to make furniture or other wooden objects. Traditionally, wood planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the intended shape of the item being worked on. The blade or iron was likewise formed to a flat shape and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers' shop might have many, perhaps hundreds, of smoothing and moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. A vintage tool by an unknown maker, this item was made for cabinet-making firms and individuals that worked in wood and needed a tool that could remove large amounts of timber. These jack, block or dressing planes as they were known came in various shapes and sizes to achieve a flat and even finish to timber surfaces before the use of mechanical smoothing planes and came in many sizes. A significant tool from the late 18th to early 19th century that's pattern or shape is still in use today. Early models of this type of woodworking plane are sought after by collectors today. This tool gives us a snapshot of how furniture and other finishes were created on timber by the use of cutting-edged hand tools used by craftsmen of the time. Tools that were themselves handmade, demonstrating the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce either a decorative or even finish for timber items. Smoothing Plane blade and wedge present. Raised handle at front end. Right-hand wedge guide broken away. Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane, wood plane, cabinet makers tools, furniture making -
Flagstaff Hill Maritime Museum and Village
Tool - Wood moulding Plane, Mid to late 19th century
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it.A vintage tool made by an unknown maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use to produce a decorative moulding for a piece of furniture, door trims etc. or other timber items that had to be accomplished by using hand tools and in particular one of these types of planes. Profiled planes came in various shapes and sizes to achieve the required decorative finish. A significant tool from the mid to late 19th century that today is sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tongue and groove match plane with metal strip affixed with 5 screws Mc Vicar stamped on end and No 2. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Tool - Scythe, 1930-1960
A Scythe was one of the most important of all agricultural hand tools, consisting of a curved blade fitted at an angle to a long, curved handle and used for cutting grain. In modern scythes the handle has a projecting peg that is grasped by one hand, facilitating control of the swinging motion by which grass and grain are cut. The exact origin of the scythe is unknown, but it was little used in the ancient world. It came into wide use only with agricultural developments of the Carolingian era (8th century AD) in Europe, when the harvesting and storing of hay became important to support livestock through winters. Scythes can still be found in use today by hobby farmers and permaculturists. ( producing food, by using ways that do not deplete the earth's natural resources) to cut grass in a more eco-friendly way as opposed to using a machine.A hand tool used for the cutting of crops and grain, modern versions are still being produced today in Europe. The subject item gives us a snapshot into agricultural practices in times past.Scythe with long wood Snath (curved handle) with 1 hand holding piece & curved blade. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Tool - Plane, Early to Mid 19th Century
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it.A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. It also gives an insight into how many manufacturing companies bid for the rights to use prison labour to make their products at this time in our history. Moulding Plane T S Richards & Co. J Heath owner stamped. No 4/8 opposite endflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, t s richards & co -
Flagstaff Hill Maritime Museum and Village
Tool - Plane, Mid to late 19th Century
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it.A vintage tool made by an unknown company, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding Plane 4 screws attached to wood bottom plateJ Heath. 1/2 inch on opposite end.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, j heath -
Flagstaff Hill Maritime Museum and Village
Tool - Plane, Mid to late 19th Century
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it.A vintage tool made by an unknown company, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Circular moulding Rabbet Plane Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, circular rabbet plane, plane -
Flagstaff Hill Maritime Museum and Village
Tool - Moulding Plane, Mid to late 19th Century
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it.A vintage tool made by an unknown company, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding Plane H Heathflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, plane -
Flagstaff Hill Maritime Museum and Village
Tool - Moulding Plane
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. A vintage tool made by an unknown maker, this item was made commercially for firms and individuals who worked in wood and needed a tool that could produce a ornamental finish to timber. These profiled planes came in various shapes and sizes to achieve a decorative finish. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Moulding Plane, concave cut.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village