Showing 162 items matching batches
-
Parks Victoria - Maldon State Battery
Bucket
This container would have been used to transport a chemical, but appears to have been repurposed as a bucket for use at the battery complex. Cylindrical iron bucket with handle, painted yellow with green labelling"ICI" above two parallel wavy lines within a circle/"alfloi"/"trade mark"/"214" stamped in a rectangle/"Imperial chemical industries"/"of Australia and New Zealand limited"/"1 Nicholson Street, Melbourne"/"Net weight when packed"/"Batch No." /"Tare"/"5 LBS" (same on both sides) -
Kiewa Valley Historical Society
Photograph of Lake Guy Dam, Spillway, Lake Guy Dam, c1945
In December 1939 the excavation of the diversion tunnel at the site of Junction (Lake Guy) Dam was commenced and finished in February, 1940.This allowed the stream to be diverted to facilitate the dam wall construction. This is a 'slab and buttress' dam. It is framed with timber and concrete then poured into the structure. A contract was let to Lewis Construction Co. for the construction of the dam, and the first batch of concrete was placed in September, 1940. Industrial trouble caused some delays but there was also slow progress on the part of the contractor and the work was taken over by the S.E.C., terminating the contract. The dam was completed in March, 1944. The lake is named after Mr. L.T. Guy who was the Resident Engineer, in charge of construction work and associated activities on the Kiewa area, from 1939 until November 1946. An historical pictorial record taken for the State Electricity Commission of Junction Dam (Lake Guy) on spill. Mt. Arthur is in the background and there is still evidence of the destruction of trees from the 1939 bushfires. Black and white photograph of Lake Guy Dam . The dam is spilling and Mt. Arthur is in the background. Hand written on back of photograph in blue ink " Lake Guy Dam".dam, lake, water, mr. l.t.guy -
Kiewa Valley Historical Society
Photograph of Lake Guy Dam, Walkway, Inside Lake Guy Dam, c 1945
Lake Guy Dam is a 'slab and buttress' type wall. A timber frame is built and then filled with concrete. The first batch of concrete was placed in September, 1940. By June, 1941 the buttresses were finished to a height safe from floods and in October of that year a flood of 2,800 cusecs occurred but with only slight damage to the installations. Industrial trouble caused some delays but there was also slow progress on the part of the contractor and the work was taken over by the S.E.C., terminating the contract. The dam was completed in March, 1944. A walkway was made through the dam wall. Lake Guy was named after Mr. L.T. Guy who was the Resident engineer, in charge of construction work and associated activities on the Kiewa Area from 1939 to November 1946.Shows the walkway placed as part of the Lake Guy (Junction) Dam wall. A very good pictorial reference for the future.Black and white photograph of the walkway through Lake Guy (Junction) Dam wall.Handwritten in blue ink on back of photograph "Inside Lake Guy Dam". slab, buttress, dam, mr. l.t. guy -
Warrnambool RSL Sub Branch
Army Uniform trousers, Polyester Trousers, 1989
This item of uniform was own, worn and donated by Major (Retd) Bernard Farley during service in the Army Reserve Infantry at 8/7 Royal Victoria Regiment (RVR) Ballarat VICPolyester trousers with two side pockets, one back pocket, money pocket with belt loops and brass ceremonial belt keepersTag - A.D.I. P/L VIC 1989 ARROW indicating Govt. NSN 8405-66-0185-5522 MACQUARIE 89, Batch C Size. 80RF W.90 L.77 NAME. SERVICE NO. DRY CLEAN ONLY(A) Press on original creases. Use damp cloth. Medium to hot steam iron -
Kiewa Valley Historical Society
Photo - Junction Dam Construction, Circa 1940's
Junction (Lake Guy) Dam is a 'slab and buttress' type wall. A timber frame is built and then filled with concrete. The first batch of concrete was placed in September, 1940. By June, 1941 the buttresses were finished to a height safe from floods and in October of that year a flood of 2,800 cusecs occurred but with only slight damage to the installations. Industrial trouble caused some delays but there was also slow progress on the part of the contractor and the work was taken over by the S.E.C., terminating the contract. The dam was completed in March, 1944. A walkway was made through the dam wall. Lake Guy was named after Mr. L.T. Guy who was the Resident engineer, in charge of construction work and associated activities on the Kiewa Area from 1939 to November 1946Photos of the construction of the Junction Dam detail the harsh conditions faced by construction workers, building dams and villages to accommodate workers in the 1940s to the 1950s. Australia at this period in time, experienced a surge of population (influx of World War II refugees), which was the catalyst for developing and undergoing an enormous hydroelectricity program for the Alpine regions, both in Victoria and New South Wales. This program was initiated to supply electricity to the major southern Australian cities of Adelaide, Melbourne and Sydney. It was thought that these developments would reduce, if not eliminate, the requirement for coal driven power stations. However time has demonstrated that these power stations have not matched the demand required by the industries and the populations of the major urban and cities.Black and white photograph of Junction Dam constructionjunction dam, bogong, secv -
Kiewa Valley Historical Society
Photo - Junction Dam Diversion Tunnel
Junction (Lake Guy) Dam is a 'slab and buttress' type wall. A timber frame is built and then filled with concrete. The first batch of concrete was placed in September, 1940. By June, 1941 the buttresses were finished to a height safe from floods and in October of that year a flood of 2,800 cusecs occurred but with only slight damage to the installations. Industrial trouble caused some delays but there was also slow progress on the part of the contractor and the work was taken over by the S.E.C., terminating the contract. The dam was completed in March, 1944. A walkway was made through the dam wall. Lake Guy was named after Mr. L.T. Guy who was the Resident engineer, in charge of construction work and associated activities on the Kiewa Area from 1939 to November 1946.Diversion dams are installed to raise the water level of a body of water to be redirected. The redirected water is used for hydro electric power generation. A diversion tunnel is usually bored through solid rock next to the dam site to bypass the dam construction site. The dam is built while the river flows through the diversion tunnel.Photos of the construction of the Junction Dam detail the harsh conditions faced by construction workers, building dams and villages to accommodate workers in the 1940s to the 1950s. Australia at this period in time, experienced a surge of population (influx of World War II refugees), which was the catalyst for developing and undergoing an enormous hydroelectricity program for the Alpine regions, both in Victoria and New South Wales. This program was initiated to supply electricity to the major southern Australian cities of Adelaide, Melbourne and Sydney. It was thought that these developments would reduce, if not eliminate, the requirement for coal driven power stations. However time has demonstrated that these power stations have not matched the demand required by the industries and the populations of the major urban and cities.Black and white photograph of Junction Dam diversion tunnel at Bogong VillageHandwritten on back - Junction Dam Diversional Tunnelbogong, secv, junction dam, lake guy -
Kiewa Valley Historical Society
Photograph - Junction Dam spilling
Junction (Lake Guy) Dam is a 'slab and buttress' type wall. A timber frame is built and then filled with concrete. The first batch of concrete was placed in September, 1940. By June, 1941 the buttresses were finished to a height safe from floods and in October of that year a flood of 2,800 cusecs occurred but with only slight damage to the installations. Industrial trouble caused some delays but there was also slow progress on the part of the contractor and the work was taken over by the S.E.C., terminating the contract. The dam was completed in March, 1944. A walkway was made through the dam wall. Lake Guy was named after Mr. L.T. Guy who was the Resident engineer, in charge of construction work and associated activities on the Kiewa Area from 1939 to November 1946Photos of the construction of the Junction Dam detail the harsh conditions faced by construction workers, building dams and villages to accommodate workers in the 1940s to the 1950s. Australia at this period in time, experienced a surge of population (influx of World War II refugees), which was the catalyst for developing and undergoing an enormous hydroelectricity program for the Alpine regions, both in Victoria and New South Wales. This program was initiated to supply electricity to the major southern Australian cities of Adelaide, Melbourne and Sydney. It was thought that these developments would reduce, if not eliminate, the requirement for coal driven power stations. However time has demonstrated that these power stations have not matched the demand required by the industries and the populations of the major urban and cities.Black and white photograph of Junction Dam spilling at Bogong VillageHandwritten in pencil - Junction Dam spillingbogong, junction dam, lake guy, secv -
Puffing Billy Railway
Malcolm Moore Rail Tractor 0-4-0 2' Gauge, 1943
Malcolm Moore No. 1015 One of a Batch of 92 such rail tractors built. Builders Number 1015. Built for the Australian Army in 1943 Built for the Australian army - delivered to Army on the 3 March 1944 and was sold to the State Rivers and Water Supply Commission at Red Cliffs, Victoria. - used at the Red Cliffs Power station to haul briquettes from the rail siding Red Cliffs to the Red Cliffs Power Station and also used for shunting and some haulage from the Red Cliffs siding.. This rail tractor was originally powered by a Ford side valve V8 petrol engine. It arrived at the Museum from Red Cliffs in 1977 and is operational. Originally equipped with a Ford side valve V8 Later replaced by a Fordson Major diesel tractor engine.Historic - Narrow Gauge Industrial Railway - used by the Australian Army, and the State Rivers and Water Supply Commission at Redcliffs, Victoria, AustraliaMalcolm Moore No.1015 - Malcolm Moore Rail Tractor 0-4-0 Malcolm Moore Rail Tractor - Steel (Painted)Malcolm Moore Rail Tractor 0-4-0 Malcolm Moore 2' Gauge 1015puffing billy, malcolm moore, ford v8, rail tractor, fordson, australian army, state rivers and water supply commission, 2' gauge, industrial narrow gauge railway -
Orbost & District Historical Society
invitation, 1930
The Orbost Methodist Church began services in April 1910, the Rev. E. Hooper as the first minister. Reverend R.W. Little was minister in 1930-31.Ministers at that time batched either in a little room at the back of the church or in Locksley House (near the state school). Sunday School at that time involved a lot of commitment on the part of the teachers towards the children and this was reflected in the efforts they went to to make Sunday School an interesting and enjoyable event. The Sunday School Anniversaries were always a big community event and children usually dressed up for the occasion. The children spent weeks practising hymns and choruses for the occasion and on the Saturday before picked armfuls of flowers from Mrs Hocking's garden ( may blossoms) to decorate the church hall. (ref. Pioneers and Pilgrims Revd Peter Gador-White).For many years the Methodist people of Orbost enjoyed the fellowship of the church and the children, in particular, were socially and spiritually involved. This item is reminiscent of that time.A rectangular cardboard invitation to a service and prize-giving at the Orbost Methodist Sunday School. The print is black on a pale blue background with a black frame and floral decorations in each cornerSpecial Invitation R.W. Little, Ministerorbost-methodist-church sunday-school -
The Beechworth Burke Museum
Animal specimen - Blue-faced Honeyeater, Trustees of the Australian Museum, 1860-1880
The Blue-faced Honeyeater is commonly located in northern and eastern mainland Australia. It is also found in Papua New Guinea. This species prefer to reside in tropical locations or those which are sub-tropical and wetter temperate or semi-arid zones. It can be located in open forests and woodlands close to water. Due to these locations along with it's propensity for feeding on the fruit and flowers of the banana in northern Queensland, this species is colloquially known as the "Bananabird". These birds commonly reside in pairs, family groups or small flocks. They can often be found socialising with other species including the yellow-throated miner and the Little Friarbird. The Blue-faced Honeyeater feed on insects and invertebrates, but also may eat nectar and fruit from native and exotic plants. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The blue-faced Honeyeater is large in size with bright white and black colouring. The bird also has golden olive-green colouring on it's rear, tail and wings. Around the eyes is strikingly blue coloured skin which has faded significantly on this particular specimen. It also has a pair of glass eyes to replace the original which do not survive the taxidermy process. There is a patch of dark colouring on the plumage of the stomach and neck of the bird. This dark batch is surrounded by white plumage which also forms a white band across the back of the neck. This specimen is stylized placed on a wooden mount. The bird's feet are attached to a thin stick and the stick attached to the mount.taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, honeyeater, blue-faced honeyeater -
Ballarat Tramway Museum
Photograph - Digital image Set of 5, Alastair Reither, 13/05/2012 12:00:00 AM
Yields information about the operation of the horse tram by the BTM during the Ballarat Heritage Weekend 2012.Set of 5 digital images taken on Sunday 13 May 2012 of the horse tram operating between Gardens Loop and St Aidans Drive by Alastair Reither. From a batch of 112 photos, stored with BTM Photos, used in the web article "Still at work" for the 2012 update. .1 - Returning from St Aidans Drive, looking south east. .2 - scene at Gardens Loop .3 - Running to St Aidans Drive, across the fairy lands area - similar photo used in Fares Please! June 2012 .4 - swapping the horses around at St Aidans Drive .5 - Running to Wendouree Parade, across the fairy lands area trams, tramways, horse tram, btm, wendouree parade, heritage, tram 1 -
Melbourne Tram Museum
Document - Report, Melbourne & Metropolitan Tramways Board (MMTB), "Wheels - 28" Wrought Steel - 1948 Rolling - Contract No. 1380", 24/09/1951 12:00:00 AM
Report - typed carbon copy - 35 foolscap sheets bound within a brown card folder, drawings, charts, secured with fold back clips, with adhesive tape binding on the outside. Titled "Wheels - 28" Wrought Steel - 1948 Rolling - Contract No. 1380", dated 24 September 1951, prepared by the MMTB Testing Department, Report No. W4/1/287. Gives details of the extensive testing done on a batch of wheels rolled by Commonwealth Steel Company Newcastle, approx. 450 wheels had been ordered. Includes details of manufacture, testing, chemical analysis, dimensional check, hardness and service details. Has many appendices, giving details of the wheels.trams, tramways, preston workshops, reports, specification, wheels, tramcars -
Bendigo Military Museum
Uniform - JACKET, TROUSERS, SHIRT, BATTLE DRESS, ARMY, Australian Defence Industries, 2. 1990 3. 1988
Uniform issued to "P. Green" No. 32045731. Jacket, Khaki colour wool serge fabric. Battle Dress style, belted at the waist with metal buckle. Dark green plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap, sleeve cuffs. Green colour cotton twill fabric lining to waistband. Manufacturers white cotton fabric label - left pocket lining. Removeable tag on inside collar. 2. Trousers, khaki colour wool serge fabric. Battle Dress style with fob pocket, two side pockets, one back pocket with concealed button down flap. Dark green plastic buttons, metal zipper fly. Manufacturers white cotton fabric label - back pocket lining. Green colour polyester lining. 3. Shirt, Khaki colour cotton/polyester long sleeves, with shoulder epaulettes and cream plastic buttons. Two front pockets with button down flaps. Manufacturers white cotton fabric label inside back below collar.Manufacturers information on labels - black ink print. 1. "ADI P/L/ VICTORIA/ 1990/ ^ / 8405-66-025- 6418/BATCH P/ SIZE 102/104L/ ARMY NO./ NAME/DRY CLEAN ONLY/ CREASE UPPER/ HALF OF LAPELS ONLY" 2. "ADI P/L/ SUB-4 VIC 1990/ ^ / 8405-66-025-6183/ BATCH S/ SIZE 84R W.84/ DRY CLEAN ONLY/ RE-PRESS ON ORIGINAL/CREASES SET BY/ SI-RO SET/ MENDING PATCH ATTACHED/ ARMY NO/ NAME" 3. " A.G.C.F./ 1988/ ^/ SIZE 40/84/ 8405-66-088-7098/ SERVICE NO./ NAME/ DO NOT BOIL OR WRING/ MACHINE WASHABLE/ DRIP DRY/ IRON LIGHTLY/ WITH WARM IRON" Handwritten - blue ink pen "3204573/Green" uniform, army, battle dress, p. green -
Montmorency/Eltham RSL Sub Branch
Functional object - Canister, NBC, Respirator, 17/12/1990
Obtained from operations in Afghanistan.Obtained from operations in Afghanistan.A30/4 Barrier Rated Aluminium Foil wrapped and sealed NBC canister for a respirator. White printed ID label on rear of item.A30/4 Barrier Foil From TECPAC. 0923 244343. INT DEF. STAN81-75 Type 1. 200 Degrees C, 2 Secs, 2Kg/cm squared NSN 4240-99-132-0941 Canister, NBC, Respirator. Manuf + Sealed 17/12/90. Impregnated Oct 1990. Protector Safety LTD. Batch C90129017canister, nbc, respirator, afghanistan, australian military -
Beechworth RSL Sub-Branch
Uniform - Jacket, Battle Dress, Australian Government Clothing Factory, 1981
Issued as a uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This uniform belonged to CPL K. Howe, the donor providing good provenance. In conjunction with other items of militaria donated by the Howe family. Item can be to tell a story of multi generations of military service of the Howe familySingle breasted hip-height jacket in khaki fabric, fastened with five buttons down the centre of the chest. Two pleated breast pockets with triangular flaps fastened with two buttons. All buttons plastic and khaki green in colour. Jacket is fastened around the hips with a belt, attached on left hand side and buckled in a rectangular metal buckle on right hand side. Both left and right sleeves bear two patches, a double chevron and red rectangular patch rounded to follow the seam of the shoulder, with embroidered text. Navy lanyard looped around right shoulder, held in place by epaulet and tucked into right side pocket. Red patch reads "ROYAL AUSTRALIAN ENGINEERS" Internal left chest label reads "A.G.C.F./VIC. 1981/[broad arrow symbol]/6405.66.025.6408/SIZE OF CHEST/SIZE 99-102R/MACQUARIE 80/BATCH J/DRY CLEAN ONLY/CREASE UPPER/HALF OF/LAPELS ONLY/No. 3144504 [handwritten]/NAME/CPL K. HOWE [handwritten]"jacket, battledress jacket, battledress jacket khaki, royal engineers -
Melbourne Legacy
Article, Bulletin VALE Legatee Cecil Ernest Waters, 1986
A Vale notice that was published in the Bulletin in 1986 on the death of Legatee Cecil Waters. After the death of his father in WW1 Cecil Waters became a junior legatee from 1926. So he was among the first batch of Junior Legatees. He joined the Intermediate Legacy Club and served a term as President of the ILC. During WW2 he served in the Middle East and South West Pacific area from 1941 to 1946, completing his service as a Captain with the 2/1st Aust Beach Detachment. After his war service he was eligible to join Legacy as a Legatee. He was proposed by Legatee Len Frazer and seconded by Legatee Frank Doolan. He married Stan Savige's daughter, Gwen in 1954 and they had a son Stanley Waters. Ill health caused him to be placed on Reserve in 1962. Gwen died in 1980.A record of the life and service of Legatee Cecil Waters.White A4 paper of a photocopy from the Bulletin of the notice about Legatee Waters.vale, cecil waters -
Federation University Historical Collection
Newspaper, The Courier, 100 years of service, 1967, 10/06/1967
... batches ...The newspaper was produced to celebrate the 100th year of the Ballarat Courier.96 page newspaper celebrating 100 years of publishing the Ballarat Courier Newspaper. Stories and images include: Robert Clark, Ballarat history, Sturt Street, Selkirk Bricks, Ballarat Industry, Thomas Bath, Royal Hotel, hotels, Begonia Festival, James Smith, Hollways, Myers, Ballarat Orphanage, Nazareth House, Lake Elsworth, Batches, libraries, Timken, Sunshine Biscuits, M.B. John, AMCAST, reservoirs, Ballarat Council,, Morsheads, Civic Hall, Alfred Hall, Art Gallery, Christies, 3BA, Paddle Bros, South Street, BTV 6, Memorial Theatre, Her Majesty's, Whitelaw-Monier, Coltman, costume, Messer and opie, politics, Dudley Erwin, Bill Stephen, Vance Dickie, Tom Evans, Murray Byrne, McKay - Macleod, Crockers, Ballarat Shire, Sovereign Hill. St Patrick's Cathedral, Christ Church Cathedral, Ballarat School of Mines, Mt Helen Campus, Ballarat Girls School. Ballarat North Technical School , Burke and Wills Memorial, Joe White Maltings, Ballarat Airport, Sunicrust, architecture, women, trams, transport, Faulls, Franklin Caravans, Olympics, football, history of Sunshine Biscuits robert clark, clark, ballarat, sturt street, selkirk bricks, industry, thomas bath, royal hotel, hotels, begonia festival, james smith, hollways, myers, ballarat orphanage, nazareth house, lake elsworth, batches, libraries, timken, sunshine biscuits, m.b. john, amcast, reservoirs, ballarat council, morsheads, civic hall, alfred hall, art gallery, christies, 3ba, paddle bros, south street, btv 6, memorial theatre, her majesty's, whitelaw-monier, coltman, costume, messer and opie, politics, dudley erwin, bill stephen, vance dickie, tom evans, murray byrne, mckay - macleod, crockers, ballarat shire, sovereign hill. st patrick's cathedral, christ church cathedral, ballarat school of mines, churches, mt helen campus, ballarat girls school. ballarat north technical school, burke and wills memorial, joe white maltings, ballarat airport, sunicrust, architecture, women, trams, transport, faulls, franklin caravans, olympics, football, bray raceway, coliseum motors, schoools, education, craig bros, dayelsford, clunes, beaufort, linton, skipton, heinz bors, villiers, flecnoe, jones, robertson, cowles, bulless, cronn, matthews, ballarat library, cowley's eureka iron works, john hollway and sons, ken webb, mayoral chain, ken flecknoe, a.e. flecknoe, bath's hotel, eureka stockade memorial park -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Manufactured Glass, bottle 'Crystalline Penicillin', December 1955
Penicillin is a group of antibiotics derived from Penicillium fungi, including penicillin G, procaine penicillin, benzathine penicillin, and penicillin V. Penicillin antibiotics are historically significant because they are the first drugs that were effective against many previously serious diseases, such as syphilis, and infections caused by staphylococci and streptococci. Penicillins are still widely used today, though many types of bacteria have now become resistant. All penicillins are β-lactam antibiotics and are used in the treatment of bacterial infections caused by susceptible, usually Gram-positive, organisms. The development of penicillin for use as a medicine is attributed to the Australian Nobel laureate Howard Walter Florey, together with the German Nobel laureate Ernst Chain and the English biochemist Norman Heatley A clear glass bottle with a metal fixed top in which the central rubber disc has been pierced by a needle .Front: CRYSTALLINE PENICILLIN / ( SODIUM SALT) G / GLAXO / FOR INJECTION / Use only under medical supervision / 1000000 / UNITS PER VIAL. Left side : Refrigeration unnecessary....MANFD. DEC. 1955 / EXPIRY DEC. 1958 / POTENCY 1667 / IU/MG / BATCH 269. Right side :Contains over 90% / penicillin G / Contains no preservatives / GLAXO LABORATORIES / (AUST.) PTY. LTD. / Melbourne Sydneypharmacy, medicines, penicillin, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, manufactured glass, bottles, glaxo laboratories melbourne -
Lara RSL Sub Branch
Army Jacket, E.W. PTY LTD, Australian Army Jacket, 1968
This jacket, along with the rest of the dress uniform, belonged to an individual named H.E Schulze. It is believed to have been dropped off to the RSL, so no additional information is known. This uniform serves as an example of the military dress worn by the Royal Australian Army (Royal Australian Artillery Regiment) during the late sixties.Khaki jacket featuring two buttoned chest pockets and a belt. A rope cord is draped across and under the right shoulder of the jacket (referred to as a lanyard). There is a single patch (of red and blue colouring) that is located at the top of both sleeves, with an additional patch at the bottom of the left sleeve.Both patches read "ROYAL AUSTRALIAN ARTILLERY". Inside jacket tag reads "E.W. PTY/LTD. / SOUTH AUSTRALIA 1968 / CLASS 8405-66-025-6422 / BATCH 8/68 / MILL AV / SIZE OF CHEST 41/42 PR / MATCHING TROUSERS 39 PR / DRY CLEAN ONLY / CREASE UPPER HALF / OF LAPELS ONLY / NAME: SCHULZE HE / ARMY No. 3164207"lara, rsl, royal australian army, royal australian artillery, war -
Bendigo Military Museum
Uniform - TROUSERS, ARMY, Australian Defence Industries, 1989
1. & 2. Trousers - khaki polyester fabric, plastic buttons, metal zipper fly. One fob pocket, two side pockets, one back pocket with button down flap. Lining - Khaki polyester fabric. Poly cotton manufacturers label - inside on back pocket lining with black print information.Poly/cotton label information - black ink print. 1. & 2. A.D.I. P/L/ VIC 1989/^ / 8405.66.018.5528/MACQUARIE 89/BATCH C/ SIZE 82. 5RC/W.82.5 1L.75/ ARMY NO. /NAME/ DRY CLEAN ONLY/ REPRESS ON ORIGINAL/ CREASES USE DAMP CLOTH/ OR MEDIUM TO HOT/STEAM IRON". 1. Handwritten black pen "URQUART" on manufacturers label.uniform, army, service dress trousers -
Whitehorse Historical Society Inc.
Medal - Badges, Approx 4. 1914 -1918 11. 1928-1929
1. Small circular white badge/red cross - bar pin 'A.N.C.M' 2. Oval medal with bar, long pin- red steward badge Royal Agricultural Show 3. Ditto - blue steward badge/brooch pin 4. AIF batch surmounted by crown 5. Oval Catholic religious medal/long chain 6. Oval badge: inscribed 7. Gold/Red/White/blue enamel badge - Free Trade 1929 8. Silver badge surmounted by crown/AP on red ground 9. Blue & gold badges: Eagle/shield/St John's Mitcham 10 & 11. Blue & gold badges: Eagle/shield/St John's Mitcham 11. Green & yellow circular on ring: Caufield Cricket Club 12. Ornate green/gold/white circular badge + pointed shaft1. Deo et Nomini Servimus A N C M 2. The Royal Agricultural Society of Victoria/Steward 3. The Royal Agricultural Society of Victoria/Steward 4. AIF - rest illegible/reverse: 4B349 5. Mostra TE ISS/Matrim/ Reverse: Congregation Des Enfants De Marie / scratched initials & date: B.Y.M 1891 6. P.J. Markham 678 Whitehorse Rd Mitcham Ringwood WNE 198 7.To promote land value, taxation and free trade. 4th International Conference Edinburgh 1929/Reverse: 50th anniversary of 'Progress & Poverty' by Henry George 8. Victoria ARP AH428 9&10. St John's Mitcham SJM Fide et Amorevinco/Reverse: scratched initials M.M. Millance 11. Caulfield Cricket Club1828-29 ccc/reverse: 20p.j. markham, mitcham post office -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Manufactured Glass, bottle and measure 'VAXOS', 1946
TROVE ‘Advertisement April 2nd 1941 WHY VAXOS No. 1 MUST NOT BE CONFUSED WITH NOSE DROPS, INHALANTS, OR OTHER TEMPORARY PALLIATIVES. Vaxos No. 1 is what medical science terms an Endotoxoid, an oral vaccine, and an entirely new form of antigen with very high immunising powers. Vaxos No. I contains only pure antigens and is entirely free of herbs, drugs, or bacterial organ- isms, and is, therefore, perfectly safe for anyone to take. Vaxos No. I is produced by an Eminent Medical Bacteriologist UNDER GOVERNMENT LICENCE.and it is the ONLY PRODUCT EMANATING FROM THE LABORATORY OF THE ORIGINAL DISCOVERER OF THIS METHOD OF TREATMENT AND IMMUNISATION. As such, it must not be confused with cheaply prepared substitutes.A clear glass bottle with a plastic screw top and a clear glass, cylindrical measure with graduations of 10 to 25 drops in a cardboard box c1946. ‘VAXOS’ was used to treat respiratory infections BOTTLE ; VAXOS / No. 1 / Vaccine Products (Aust.) / Australaisian Distributors / H.C.Sleigh / (Pharmaceutical Dept.) 582 Little Colins St. Melbourne C1 / BATCH No. 1215 / Left side ; for Acute / Common Cold / Bronchitis / Antrum and / sinus troubles / Manfd. Nov.,1946 / Nett Contents 15cc. Right side : for Chronic / Catarrh / Hay Fever / Bronchial / Asthma, etc. / EXPIRY / Nov., 1948 / Medium Size Bottle . MEASURE; Paper adhering to glass - VAXOS DROPS 10, 15, 25 / Front BOX - Lid MEDIUM SIZE / BOTTLE / FOR ACUTE CASES / Base ; VAXOS / No. 1 / A colloidal polyvalent Antigen designed to / relieve and confer immunity from / respiratory tract disorders........./ Left side DIRECTIONS / ............. Batch No. 1215 / Right side ; VAXOS No. 1 / Contents ........Vaxos is made under / Government Licence by a / qualified medical bacteriologist . Back Nett. Contents 15cc / Price 12/6 / VACCINE PRODUCTS / (AUST ) /........ Manfd. NOV., 1946 / EXPIRY NOV., 1948pharmacy, medicines, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, vaxos medicines, h.c.sleigh pty ltd, bacteriology, c.s.i.r.o departments melbourne, vaccine products australia, respiratory diseases -
Ballarat Clarendon College
Photograph, Ballarat College Football Team 1902
Framed, black and white photograph with names inscribed on light green card mount; brass wall fittings on each end. Inscribed on mount below photograph: Ballarat College Football team 1902 / Back row from left / Quiney, Leo Charles, Lambert, Not known, Martin, Jackson, A McCoy / Chapman, G Tyler, E Holgate, Smith. Teacher G Hay / Front row: / Batch, Frank Williams, H Heinz, G Pinney, Tommy Williams, J Walker, W Hartley, S Sim, R Conners / Seated on ground / R Holgate S Walker -
Shepparton RSL Sub Branch
Uniform, Jacket, E.W. PTY/LTD, 1968
This jacket is part of a Royal Australian Army Ordnance Corps uniform. The Royal Australian Army Ordnance Corps (RAAOC) is responsible for various logistics and organisational operations, such as maintenance of parachutes, fuel distribution, personnel administration, exlosive disposal and laundy operations. The jacket was manufactured in 1968 and was worn by an unknown RAAOC serviceman. The patches on his sleeves denote that he had earned qualifications as a parachuter and a marksman and that he was a Warrant Officer 1. Due to the period of manufacture it can be presumed that the serviceman whom this uniform belonged to served Vietnam War.As an historic military uniform dating to 1968, it is presumed that this item would have been used in service during the Vietnam War. The wearer of the uniform is unknown, however the patches and flashes attached signify that the serviceman worked for the Royal Australian Army Ordnance Corps, earned qualifications as a parachuter and marksman and ranked highly as a Warrant Officer 1. The item is representative of a type of uniform worn by high ranking RAAOC servicemen during the 1960’s. It is also in very good condition for its age.A khaki coloured waist length jacket which is composed of a heavy fabric. The jacket fastens with five buttons down the front and a buckle. The buttons are composed of brown plastic and the buckle is a dark grey metal. The buckle is attached to a waistband on the right-hand side which loops around to a strip of fabric on the left-hand side which passes through the buckle. There are two breast pockets, one on each side of the chest. The right breast pocket is fastened with a brown plastic button and the left breast pocket is missing its button. Each pocket has a flap of fabric which covers the button area. The jacket has a collar and an epaulette on each shoulder which are each fastened with one brown plastic button. There is a ribbon of fabric on the interior of the collar with no inscriptions. There are identical crescent shaped red patches on each shoulder, each showing the words in navy blue stitching "Royal Australian Army Ordinance Corps". The upper right sleeve has a khaki coloured parachuting qualification patch, which depicts an air balloon in white stitching, with wings on either side in light blue stitching. The lower section of each sleeve has a Warrant Officer First Class khaki coloured patch. This depicts a shield in red, black, white, blue and gold stitching in the centre which sits beneath a gold and blue striped line and a gold star. There is a gold kangaroo to the left of these motifs and a gold emu to the right. Beneath these motifs there is a ribbon in white, blue and gold stitching with the word "Australia". In addition there are curvilinear green decorative elements with yellow flowers on their ends. The left-hand sleeve also has a brown marksmen qualification patch. This depicts two crossed rifles in white and brown stitching. There is a white label with printed inscriptions on the interior of the left breast pocket. There is also a band of fabric on the interior back waist band which has three button holes.Printed in black inscriptions on the white label: E.W. PTY/LTD. SOUTH AUSTRALIA 1968 (a broad arrow) Class 8405-66-025-641 Batch A.W... Mill (the ‘A.W...’ is in stamped purple ink and there are some other purple inscriptions that are difficult to decipher) SIZE OF CHEST 39/49PR MATCHING TROUSERS 37 PR DRY CLEAN ONLY CREASE UPPER HALF OF LAPELS ONLY NAME..... ARMY No..... (the number 40 is also wrtten in faded black ink in the top right corner of the label)military, jacket, army, raaoc, royal australian army ordnance corps, parachuting, marksman, warrant officer, uniform -
Beechworth RSL Sub-Branch
Uniform - Jacket, Dress Uniform size 38 short, Jacket Service Dress Army, C. 1968
Standard dress uniform jacket for soldiers.Khaki coloured single breasted jacket fastened with four centre plastic buttons and a belt. Belt attached to jacket on back via two leather loops buttoned around a fabric loop. Jacket carries two breast pockets on exterior with flap, each fastened with single plastic button and two metal press studs. Two hip pockets with flaps, unfastened. Interior is lined with synthetic fabric; one interior chest pocket on the left hand side underneath which is a manufacturers label (transcribed below). Small square paper tag sewn into left jacket interior (transcribed below).Interior label reads "E.W. P/LTD./SOUTH AUSTRALIA/1968/[broad arrow symbol]/SIZE 36 SHORT/CLASS 8406/66-019-8479/ARMY No./NAME/DRY CLEAN ONLY./REPRESS USING IRON AND DAMP CLOTH OR MEDIUM TO HOT STEAM IRON./CREASE UPPER HALF OF LAPELS ONLY." Written on the label is handwritten text "J.V." And "12/0L/0/67." Stamped in purple ink "BATCH No./385." Paper tag reads "62000/LOT 12 36S/GLOBE6/67."military, uniform, vietnam war, 1960s, dress uniform, beechworth, returned services league -
Montmorency/Eltham RSL Sub Branch
Uniform - Trousers, Khaki, Summer Dress, 1989
Wool and polyester khaki dress trousers. Two pleats at the front. Fob pocket on the right front. Front zip with metal closure and button tag.. Pockets on the left and right hips. Pocket on the back right side with hidden button and button hole.Seven belt loops on waist band. Four small horizontal loops on the waist band, two at the front and two at the back. Label on the inside on the lining of the back pocket states - A.G.C.F. (Australian Government Clothing Factory) Vic 1989. 8405.66.018.5545. Macquarie 89. Batch U. Size 87.5L W.87.5 IL.82 Army No. Name. Dry clean only. re press on original creases use damp cloth or medium to hot steam iron. White tag on the waist band on the right back stating - Size 87.5L. Tag on the right hand side on the back above the pocket stating - This tag is for identification only. Please remove before wearing. Docket No. 1106512 Order No. 29743836 Size 87.5L Garment No. 20851A Remarks 6I11Manufacturer - A.G.C.F. VIC 1989polyesters, dress trousers, wool polyester -
Port Melbourne Historical & Preservation Society
Letter - Applications for positon of Dog Registration Officer, Port Melbourne Council, Documents - letters, 1919
May 2016 David THOMPSON compiled the attached alphabetical list, including names and addresses service in WWI status and blue number. Port Melbourne applicants have been added to the WWI Centenary Project website A file of mostly handwritten applications and references for position of Dog Registration Officer, Meter Reader and Assistant Collector, Port Melbourne Council 1919. Over 100 applications from all over Victoria, many from Returned Soldiers since the advert in the Standard newspaper for the position stated that they were to be given preference. Sydney R C CARNS from Evans Street, a Returned Soldier who has lost his right hand during the war, was the successsful applicant according to a report in the Standard. Others from Port Melbourne who applied were James Gilbert ADAIR, Leslie Warner CASEY, Thomas William CLELAND, John COOK, Robert Dunbar, Vincent EDWARDS, Clarence Rupbert FARMER, Walter GOTZ, J W HART, Sydney Hercules HOLMES, William Thomas HOWLETT, John KING, Thomas P LACEY, John LUMSDEN, George MA?, W WEST and J C WILMOT. 112 letters in 3 batches, applications have large blue numbers added.local government - town of port melbourne, war - world war i, workers, utilities - electricity, domestic life - pets and pests, james gilbert adair, sydney r c carns, leslie walter casey, thomas william cleland, john cook, robert dunbar, vincent 'ben' edwards, clarence rupert farmer, walter gotz, j w hart, sydney hercules holmes, william thomas howlett, john king, thomas p lacey, john lumsden, w west, l c wilmot, arthur victor heath, town clerks, dogs -
Wodonga & District Historical Society Inc
Photograph - Fred Rochow Railways Collection - First standard gauge passenger train from Sydney to Melbourne, 13 April 1962
The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community. S Class Locomotives - The eighteen members of the S Class were ordered in two batches by the Victorian Railways from Clyde Engineering for express passenger and freight workings, with the final eight locomotives ordered specifically to work the North-East standard gauge line. Many were named after prominent Victorians.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.The first standard gauge passenger train from Sydney to Melbourne pulled by Locomotive S314. This was made possible when part of Australia's gauge problem was solved with the construction of a new standard gauge line. The new line was a 317 km long line running from Albury, NSW, parallel to the existing broad gauge line to Melbourne, connecting Australia's two largest cities by standard gauge. S314 entered service on 24 April 1961 and was named after Sir John O'Shannassy who was the second Premier of Victoria. The S314 pulled the first passenger train to travel straight through from Sydney to Melbourne on 13 April 1962. On the morning of 7th February 1969, the southbound Southern Aurora collided head-on with a northbound goods train near Violet Town, Victoria. The Locomotive S314 was hauling the goods train and was destroyed by the impact of the collision. On front of locomotive "S314" On banner below Coat of Arms "FIRST STANDARD GAUGE PASSENGER TRAIN / SYDNEY - MELBOURNE/ APRIL 13 - 1962"railways wodonga, fred rochow, walker rail motor vehicles, wodonga to tallangatta rail service -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Potographs, Turkish Prisoners, c. 1918
A set of nine black & white photographs depicting mainly activities of Turkish prisoners. 1. Ten prisoners sitting in a circle preparing vegetables. On the back - "Preparing the daily stew". 2. A group of about 70 prisoners in ranks of four with hundreds more in the background. On the back "Led or fed up". 3. Three sets of 44 gallon drums set up for cooking with a line of 25 prisoners behind. On the back "One of the camp kitchens, prisoners, staff and interpreter". 4. An open plane with long lines of prisoners . On the back "Prisoners from Jenin to Lejjun". 5. A group of about 80 prisoners by a stream. On the back " The first batch of prisoners in Damascus district near Sasa". 6. Lines of graves decorated with rocks. On the back "Turkish Graveyard". 7. Another scene of the camp kitchen with a large gathering of prisoners and Light Horsemen. On the back "The stew issue". 8. A large gathering of prisoners, mainly sitting on the ground. On the back "Acres of prisoners at Tulkeram". 9. Graves of Turkish POW's who died of sickness Oct 18See descriptionphotos, turkish pow, ww1 -
Warrnambool RSL Sub Branch
Army Uniform trousers, 1968
This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of a uniform worn by soldier ranks for daily work and dress parades.Khaki coloured long trousers with attached suspenders. They have a button up front (5 brown plastic buttons). There are two pockets on either side of the trousers and one button up pocket on the back right with a flap that is fastened with a single brown plastic button. There are three extra brown plastic buttons on the back exterior of the waistband and six belt loops on the whole length of the waist band. The interior pocket fabric is more light weight and a slightly more green in colour. The interior of the right back pocket includes a white patch of fabric with printed inscriptions and further inscriptions written in black ink just above. The suspenders are composed mostly of blue, grey, beige, black and cream striped thick fabric. There are also silver coloured metallic components (which include inscriptions) and leather sections, most of which have a reddish/brown coating on the exterior and a white coating on the interior. One leather component has inscriptions in black ink on the interior as opposed to a white coating. The suspenders are attached to the trousers by six brown plastic buttons on the interior of the waistband. Back pocket interior inscriptions on the green fabric: HUGHES / 3795948 Back pockket interior inscriptions on the white fabric: E.W. P/LTD. / SOUTH AUSTRALIA / 1968 / (a symbol of a broad arrow) / Class 8405-66-025-6405 / Batch 67 / Mill / Size and Waist 28C / Matching Jacket 35 /36C / DRY CLEAN ONLY / CREASES SET BY SIROSET / REPRESS ON ORIGINAL CREASES / MENDING PATCH ATTACHED / NAME HUGHES. J.W. / ARMY No. 3795948 8PL Bcoj Identical metallic clip inscriptions on two of the suspenders: POLICE / (embossed image of a police baton)royal australian engineers, warrnambool rsl, warrnambool, engineer, hughes, sapper hughes, 3795948, hughes 3795948, uniform, army uniform, trousers, army