This handmade picture has been painted on a cast plaster or composition frame. Plaster frames were popular in the e19th century. The material is quite fragile and many pictures from this era suffer from damage such as chips and cracks.This simple handmade painting on cast composite frame is typical of 19th century art work found in middle and upper class Victorian homes of that era. It cannot be attributed to a particular artist due to lack of inscriptons.Painting, oil on composite material, handmade Pink coloured cast composite oval frame with decorative border. Painting depicts two figures in a small green boat on the shore, sandy beach, rocks nearby, small surf waves, mild sea, two sailing vessels in background. No inscription on front of painting. flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, victorian art work, maritime scen, composite material, plaster, cast frame, oval frame, victorian era

Presented to Dr Higgins as Bishop of Rockhampton before his translation to Ballarat. This presentation piece evidences Bishop Higgins' work around Australia in the late 19th and early 20th century and his administrative moves.Victorian Silver Plated folding scallop design warming/biscuit dish, having a hand-chased oval body with grape and vine leaves decoration and plane silver border sitting inside a rustic cast frame with cast feet. c.1890. Inscribed- To the Right Rev Dr Higgins from his grateful children the Pupils of Rosebank Sept 2nd 1899. Makers Mark for Walker and Hall underneath dish.walker and hall, bishop higgins, rockhampton, ballarat, rosedale.

Brace was used by cooper or wheelwright during the 1960'sBrace used by cooper or wheelwright. Black leather handle on cast iron frame.trades, coopering, trades, wheelwrighting

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. The actual bell and part of the striker are missing. The striker has been broken off. The "JS" indicates it was made by John Stephenson of New York who made tramway equipment and the first cable tram saloon cars for Melbourne. Demonstrates a conductors communication or signal bell made for use on tramcars.Part of a brass Conductor Communication Bell, or signal bell, consisting of cast frame, part of the bell striker and bell pull part. Has at both ends, nine screw holes that were used to secure the bell to the roof of a tram. trams, tramways, conductors, bells, john stephenson

Francis John Newberry founded the Victoria Foundry and Enameling Works in 1890 with a workmate from the Humbles iron foundry in Lupton Street Geelong where he worked. Newberry & Walker Foundry & Enameling Works was built adjoining a cottage that was to be the home of the Newberry family during the ensuing years. Although Walker soon relocated to New Zealand, the Newberry and Walker foundry had become a local success. The foundry produced numerous cast iron products such as washing copper frames, and friezes, balustrades and verandah columns. Verandah posts are to be found in declining numbers, but the Newberry and Walker mark can sometimes be seen on the few which remain. A certain number of iron culvert posts were also made; some of them were still in place on the road to Cressy as late as 1961. Perhaps half the iron friezes on Geelong West verandahs came from the local firm’s foundry. A significant item made in Geelong giving a snapshot into the early beginnings of Victoria's industrial manufacturing of products that helped to replace previously imported items from England or America.Copper boiling tub, cast iron frame copper bowl inside of 14 gallon capacity Newberry & Walkerflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, copper, cast iron, newberry & walker, washing copper frame, laundry, dairy, butchering

Bought from Ireland by George Cox's Great Grandmother and slept in by each succeeding generation including George (Donor)Black cast iron framed child's cot with higher sides at top. Cot folds up. Childs bed.furniture, domestic-nursery

Bell used by the conductor to signal to the driver to stop, proceed or an emergency stop. The flat leather strap indicates it was used on a cable tram, rather than an electric tramcar which were fitted with round leather cords. The leather strap is riveted to a round steel ring.Demonstrates a conductors communication or signal bell made for use on cable trams.Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell striker and bell pull part. Has at both ends, four open screw holes that were used to secure the bell to the roof of a tram with a flat 22mm wide leather strap attached using a steel ring.trams, tramways, conductors, bells, cable trams

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. MMTB Drawing R1241 Details of Signal Bell refers.Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, three nuts to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, four screw holes that were used to secure the bell to the roof. Has at either end, some letters cast into the section that was used to secure the bell into position. Unable to be deciphered.trams, tramways, conductors, bells, mmtb

wall mounted cast plaque with timber framenational road trauma advisory council national road safety award 1995 winner victoria holdenaward, trophy

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, one nut and washer to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, six screw holes that were used to secure the bell to the roof and at one end the initials "TB" cast in - "Tramway Board".trams, tramways, conductors, bells, tramway board

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. TB PatternDemonstrates a conductors communication or signal bell made for use on tramcars.Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, one nut to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, multiple screw holes that were used to secure the bell to the roof. Has at one end the initials "TB" cast in - "Tramway Board". trams, tramways, conductors, bells, mmtb

Kerosene lamp, cast iron frame has iron ring handle, glass lamp, regulation dial at side and cap on base which contains the kerosene.Lanora Australialamp, lantern, kerosene

Recovered by the donor from Geelong tram No. 2 and polished for donation to the Museum. One of four bells that would have been fitted to the tram.Demonstrates a conductors communication bell made for use on tramcars. Brass Conductor Communication Bell, consisting of cast frame, bell, striker, bell pull part, one nut to secure the bell to the frame and two rivets securing for the bell pull part. Has the initials "TB" cast in both ends that were used to secure the bell to the roof - possibly indicating the "Tramway Board" manufacture. Has the number "2" on the underside of the bell in green paint.conductor, bell, trams, tramways, geelong, tram 2

It appears that the earliest form of child's high chair is attributed to Jonathan Jacobs (1845-1919) a cabinet maker of Browningsville, Pennsylvania USA around the mid to late 19th century. However, children’s chairs from the 18th century and earlier were being used and are in many museum collections around the world that show woodworkers were adapting chair designs for younger users in Europe and America at this time.An early children's wooden high chair probably made in America around 1890-1900. Many American manufactures made this type of wooden high chair called an “Eastlake” style and many did not mark their work so it is difficult to determine the subject items exact provenance. A significant item giving a snapshot into the evolution of children's furniture and domestic life during the late Victorian era.Convertible pressed back Victorian era high chair with convertible frame, cast iron wheels, Carved picture of a child to back of seatflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, high chair, potty chair, baby furniture, kitchen furniture

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. MMTB Drawing R1241 Details of Signal Bell refers. Tram 502 entered service 4/1928. Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, three nuts to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, four screw holes that were used to secure the bell to the roof. Has been stamped at one end on the underside "502" "1", indicating it was made or used on W2 502, No. 1 end. trams, tramways, conductors, bells, mmtb, w2 class, tram 502

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. MMTB Drawing R1241 Details of Signal Bell refers. Tram 579 entered service 9/1929.Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, three nuts to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, four screw holes that were used to secure the bell to the roof. Has been stamped at one end on the underside "579 2", indicating it was made or used on W2 579, No. 2 end.trams, tramways, conductors, bells, mmtb, w2 class, tram 579

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. N&C - Demonstrates a conductors communication or signal bell made for use on tramcars.Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, sheet metal domed section that is secured to the underside of the bell with one nut to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, six screw holes that were used to secure the bell to the roof. Note the difference in the casting detail between the two ends of the bell.trams, tramways, conductors, bells, mmtb

6A Built in 1901 and painted two-tone green, this locomotive was issued to the Colac to Beech Forest line and was used in that line’s construction. Over the years, it saw service on all four lines, but mostly on the Colac to Crowes and Upper Fern Tree Gully to Gembrook lines. It was temporarily withdrawn from service in 1958 and returned to service at Belgrave in 1962 for the reopening of this line where it saw almost continuous service until being withdrawn in 1983. It has been restored, as far as possible, to its original condition with original design side tanks, low bunker, original size windows, etc., but a steel cow-catcher in place of the original style wooden one. It also has its original colour scheme of two-tone green with white lining. Loco: 6A In service Thursday, 18th July 1901 Livery two-tone green Owner Puffing Billy Gauge 762mm / 2' 6' Status Preserved - Operational Service History : Jul 1901 Colac - initial allocation of a new locomotive Jul 1901 - Nov 1908 Colac Mar 1909 - May 1909 Wangaratta Jun 1909 - Other Oct 1909 - Oct 1910 UFTG. Nov 1910 - Feb 1912 Colac May 1912 - Jun 1912 Wangaratta Jul 1912 - Sep 1914 Moe Oct 1914 - Aug 1924 Colac May 1925 - Jul 1927 UFTG. Aug 1927 - Oct 1928 Moe Jan 1929 - Sep 1930 UFTG. Sep 1930 - Jun 1932 Moe Dec 1932 - Workshops May 1933 - Colac Sep 1933 - May 1936 Moe Jun 1936 - Oct 1936 Workshops Oct 1936 - May 1942 UFTG. Sep 1942 - Apr 1949 Colac May 1949 - Apr 1950 Workshops May 1950 - Dec 1957 UFTG. Feb 1958 - Apr 1962 Workshops May 1962 - Belgrave - In Active Service at Puffing Billy Railway BelgraveVictorian Railways - Narrow Gauge NA class steam locomotive number 6A Victorian Heritage Register (VHR) Number H2187 Puffing Billy Locomotives and Rolling Stock Collection Dates that 6A worked on the Gembrook Line Nov-1909 to Nov-1910 May-1925 to Aug-1927 Jan-1929 to Sep-1930 Oct-1936 to Sep-1942 May-1950 to Feb-1958 May-1962 - Returned to Gembrook railway Oct-1977 - Transferred to PBR ownershipSteam Locomotive - with wrought iron frame with cast iron cylinders6Apuffing billy, victorian railways, narrow gauge, steam locomotive, 6a, 6na

7A Built in 1905 and painted Canadian red & dark brown, this locomotive was issued to the Wangaratta to Whitfield line and saw service on all four lines with most of its service on the Upper Fern Tree Gully to Gembrook line. It was temporarily withdrawn from service in 1958 and returned to service at Belgrave in 1962 for the reopening of this line where it has seen almost continuous service since. 1979 saw the early two-tone green colour scheme applied to this loco as a trial even though it never historically carried it, but its physical configuration was not altered accordingly. It is now painted its original livery of Canadian red & dark brown and will eventually be returned, as far a possible, to its original condition with a low bunker, narrow ash-chute, etc. Loco: 7A In service Saturday, 6th May 1905 Livery Canadian red & dark brown Owner Puffing Billy Gauge 762 / 2' 6" Status Preserved - Operational Service History : May 1905 Wangaratta - initial allocation of a new locomotive May 1905 - Apr 1906 Wangaratta Jul 1906 - Nov 1910 Colac Feb 1911 - Jul 1912 Moe Sep 1912 - Dec 1917 Colac Mar 1918 - Sep 1921 UFTG. Nov 1921 - Sep 1923 Colac Dec 1923 - May 1925 UFTG. Jun 1925 - Aug 1925 Workshops Sep 1925 - Aug 1927 UFTG. Aug 1927 - Feb 1928 Workshops Mar 1928 - May 1928 UFTG. Jul 1928 - Moe Sep 1928 - Mar 1930 UFTG. Apr 1930 - Sep 1930 Workshops Oct 1930 - Oct 1936 UFTG. Nov 1936 - Moe Dec 1936 - Aug 1945 UFTG. Dec 1946 - May 1953 Colac Sep 1953 - Oct 1954 Moe Dec 1954 - Jun 1955 Workshops Nov 1955 - Dec 1957 UFTG. - Stored Feb 1958 - Apr 1962 Workshops May 1962 - Belgrave - In active service at Puffing Billy Railway Belgrave Victorian Railways - Narrow Gauge NA class steam locomotive number 7A Dates that 7A worked on the Gembrook Line Mar-1918 to Nov-1921 Dec-1923 to Jun-1925 Sep-1925 to Aug-1927 May-1928 to Apr-1930 Oct-1930 to Nov-1936 Dec-1936 to Dec-1946 Nov-1955 to Feb-1958 May-1962 - Returned to Gembrook line Oct - 1977 - Transferred to ETRB ownership Steam Locomotive with wrought iron frame with cast iron cylinders7Apuffing billy, 7a, victorian railways, narrow gauge, steam locomotive

Recovered by the donor, with approval of the Depot Foreman, from the wreckage in the SEC Ballarat yard from the demolished Tram No. 20 that was involved in a collision on 16/9/1970. One of the support members, near the bell striker has been broken through and the area where it was secured to the roof of the tram at the same end has been bent. This may be the result of the accident. JS - John Stephenson of New York?Demonstrates a conductors communication bell made by or for use on Melbourne tramcars. A reminder of SEC Tram No. 20 which was involved in a major accident in Victoria St on 16/9/1970Brass Conductor Signal or Communication Bell, consisting of cast frame, bell, striker, bell pull part, one nut to secure the bell to the frame and a screwed bolt for the bell pull part. Has a section of leather bell cord and a leather bell cord hanging piece. Has the initials "JS" cast in both ends that were used to secure the bell to the roof. Has two metal clips used to secure the leather bell cord into position.conductor, bell, trams, ballarat, tram 20, accidents, tramways

This restored porthole frame was recovered from the wreck of the Falls of Halladale at Peterborough Victoria. The Falls of Halladale- The ship was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barbed wire, stoves, oil, benzene, and many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. She was one of several designs of the Falls Line of ships named after waterfalls in Scotland. The company was founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During 1882-92 Russell & Co. standardised designs sped up their building process so much that they could build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previously, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. This artefact is important as it is an example of the materials and design of late-19th century ship’s rigging equipment. The object is also significant for its association with the historic sailing ship Falls of Halladale, wrecked in local waters in the early 20th century. The clipper ship Falls of Halladale shipwreck is of historical significance and is listed on the Victorian Heritage Register, No. S255. She was one of the last ships to sail the Trade Routes. She was one of the first vessels to have fore and aft lifting bridges. The vessel is an example of an International Cargo Ship's remains and represents aspects of Victoria’s shipping industry. Porthole frame; cast brass circular frame with several fixing holes, and hinged frame for holding the glass window. The frame has two screw dogs and a solid hinge. The porthole frame has been recondition and the layer of concretion has been removed. The porthole frame was recovered from the wrecked FALLS OF HALLADALE.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, falls of halladale, shippwreck, shipwreck artefact, porthole, pprthole frame, ship's window, ship construction, shipwreck, peterborough, 1908 shipwreck, peterborough shipwreck, russell & co., greenock, wright breakenridge & co. glasgow, clipper ship

Perfect Cheese Company was founded in 1930 by newly-arrived Italian migrant Natale Paquale Italiano. The company specialised in traditional Italian-style cheese but also produced Greek, Cypriot and Maltese origin cheeses. The cheeses were sold in Australia and Italy with all products being matured and non-processed. The company remained in operation until the early 2000s.This weighing machine is significant as it represents the machinery used by an early cheese production company.Large metal machine with cast iron with a cast iron frame and a stainless steel rectangular bowl in a cradle. The round weighing scale at the top shows a weight scale up to 1100 pounds. A mesh stainless steel baffle strains the milk.Made in England Birmingham - AVERY SOLE AGENTSallansford, perfect cheese company, avery, cheese manufacturing, dairy industry

14A Built in 1914 and painted Canadian red & dark brown, this locomotive was issued to the Colac to Crowes line and saw service on all four lines, but mostly on the Colac to Crowes line. It was withdrawn from service in 1962 at Colac and sent to Newport Workshops for storage where it remained, except for a brief time at Bendigo North Work-shops in 1963. After overhaul, it was brought to Belgrave in 1965 where it has seen almost continuous service since. In 1978, it became the first of the preserved NA’s to trial a historic colour scheme for which the Canadian red & dark brown was chosen, but ended up mistakenly being painted a “London Tan” & dark brown. In 1996 it received a more correct Canadian red livery. This “temporary” trial livery has now given way to 14A’s designated livery of all-over black. Its physical configuration will match the late 1940s era with the extended bunker, guard irons, etc. Loco: 14A In service Thursday, 25th June 1914 Withdrawn April 1962 Livery Canadian red & dark brown Owner Puffing Billy Gauge 762mm / 2' 6" Status Preserved - Operational - Converted to running on Light Oil in 2018 Service History: Jun 1914 - Colac - initial allocation of a new locomotive Jun 1914 - May 1921 Colac Aug 1921 - UFTG. Sep 1921 - Feb 1923 Moe May 1923 - Apr 1927 Colac Jul 1927 - Apr 1929 UFTG. Apr 1929 - May 1932 Other May 1932 - Nov 1934 Moe Dec 1934 - Jan 1940 Wangaratta Jun 1940 - Workshops Oct 1940 - Mar 1947 Colac May 1948 - Nov 1960 Colac - Stored Apr 1962 - Jul 1962 Workshops - Stored Dec 1965 - Belgrave - In active service at Puffing Billy Railway Belgrave Victorian Railways - Narrow Gauge NA class steam locomotive number 14A Dates that 14A worked on the Gembrook Line Aug-1921 to Sep-1921 Jul-1927 to Apr-1929 Dec-1965 - Returned to service Oct-1977 - Transferred to ETRB ownership Steam Locomotive with wrought iron frame with cast iron cylinders - Converted to running on Light Oil in 201814Apuffing billy, 14a, victorian railways, narrow gauge, steam locomotive

Chaff cutter. Bentall - 1913. Used to cut straw or hay into small pieces before being mixed together with other forage and fed to horses and cattle. Used on a small mixed farm in Emerald originally purchased by C. T. Alexander in 1920.A chaff cutter was an essential piece of equipment in early farms - of which there were many in the Emerald area - which were highly dependent on horsepower for agricultural work until the widespread use of tractors in the second half of the twentieth century.Chaff cutter with cast iron frame containing two sets of teeth which are connected to gears which are connected to a large wheel operated by hand. Missing from this particular chaff cutter are the cover for the gears, part of the handle, and the wooden chute into which the stalks were fed.Embossed on main chassis: 'BENTALL'S IMPROVED CHAFF CUTTER / 1913 / MALDON ENGLAND'. Embossed on wheel: 'BENTALL'S HEYBRIDGE MALDON ENGLAND / 1382'. Embossed on cover over feeder teeth: 'CDC BENTALL'. Embossed on feeder entrance: '947'.alexander, emerald, chaff cutter, early 20th century, bentall, agricultural machinery

Scales such as these were used to measure commercial quantities possibly grains and farm produce for quite large amounts of product.Bags of the product would have been hooked up and weighed. Salter has been a name long associated with weights and measures. Salters had their beginnings in England in the 1760's with a background in springs which are a main component of many scales. The actual mechanism for weighing objects in such scales has remained similar for over two centuries.These scales would have been a common item in most commercial operations which bought and sold items in bulk and have historical and scientific significance.Cast iron frame with circular brass face painted black.. There is a round metal ring at the top which runs through a circular metal section of the frame. A hook is attached to the bottom of the frame through a similar metal circle. The brass face has graduated markings in 1 lbs increments up to 150 lbs. On top section of scale face:Salter's Spring Balance. British Made. On lower section of scales face:To weigh 150 lb. Salter trademark of rope and anchor. warrnambool, salter scales, commercial scales, spring balance scales

These scales came from the Nullawarre Post Office, Nullawarre being approximately 25 ks East of Warrnambool. It is a small centre for the local farming community and has some services including a store, school and hall. The Post Office has closed in more recent times and these scales are one of a number of items which came to the WDHS on its closure including a brass fire extinguisher and a 1969 telephone book. Charles Williams was a postmaster at one time and Vida Williams was post mistress. These scales are an interesting and common item with a strong connection to a local community area.These scales have a cast metal frame with a circular base and a circular vertical section which frames a brass measurement circular plate which is marked in increments up to 11 lbs and held in place with two screws. There is a rectangular metal plate at the top on which the item to be weighed would be placed. The item is quite heavy in weight.On the brass plate,: POSTAL PARCEL BALANCE SALTER'S. NO. 25 BRITISH MADE.11 LB x 1/2 OZ. Underneath this is the Salter logo.warrnambool, nullawarre post office, charles williams, vida williams

J. Mann and Sons was first established as a farm produce store in 1921. The range of products was extended in the 1930s and included groceries and hardware, as well as the first petrol bowser in Wodonga outside the store. After WWII, the premises were extended and the range of products continued to increase. In the 1960s the Mann Family opened a new supermarket in Wodonga, in addition to the hardware business, providing steel, plumbing and industrial supplies, and they employed over 100 people at one stage. With changes in the retail industry, the Mann Family sold the main hardware business to Bunnings and the steel and rural produce business to the Kelly brothers in 2006.This item was an important everyday feature in many stores when items were wrapped in brown paper before the introduction of plastic bags.The paper dispenser has a wooden top and base, with a cast iron frame and lever. There is a removable metal rod which holds the paper roll in place. It was used for dispensing brown wrapping paper. The Blade" lever is not sharp, but was used to stabilise the paper roll so the paper can be easily torn off at the required length. An empty paper roll is included.mann wodonga, wodonga businesses