Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland archives, containers, crane

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland archives

These items were used or were available for sale by chemists in Orbost. Chemists who worked in Orbost included Henry Cottman; James Alfred Dubois Williams; Harry Arthur Murray; Miss P.E .Mason (Phyllis Estelle?); Miss Sybil Monica Buzza; Thomas James Frayer; Australia Shaw; James David Torley; John William Zimmer; Dalkeith William Steele; William Thomas Hollingsworth; E.E. Cohen; R.S. Anderson; Frances John Perry Faith Everard Pardew and Charles Anthony Wurf. Medicinal bottles are probably the largest and most diverse group of bottles. The practices of early pharmacists are revealed through these glass bottles. The items have a clear association with Orbost. Thirteen containers, twelve glass and one cardboard. More details in catalogue folder.

Emergency food Heavy gauge green sealed tin containing rations for ! man for 1 meal Ring pull to openEmergency Rations. To be consumed when no other rations of any kind are procurable. Consumption of this must be reported at first opportunity. Instructions for use are printed under cover rations ration pack emergency rations

Containers for the transport and storage of 81mm mortar rounds..1 & .2 Brown cylinder containers made of cardboard, with pull off lid section for access. .1 & .2 "COMP B C223 CARTRIDGE 81mm He M362 W/FUSE FOR MORTARS M1 AND M29 LOT MA-22-5" Metal lids top & base "81mm MORTAR, CONTAINER M252A1 VB M 11-80 A" mortar, war, 81mm rounds, containers

Port of Portland Authority archivesFront: (no inscriptions) Back: (no inscriptions)port of portland

Plastic with slide off top, holds 10cc of blood, disposal and non-toxic10cc, S, disposable, non-toxic, sterile, non-pyrogenicblood storage containers

Article from Brooksy's Briefing about Reverse Vending Machines for recycling at Greensborough PlazaNewsletter article text with colour imagegreensborough plaza, recycling, colin brooks, container deposit scheme victoria

The two glass water containers/bottles are thought to have been used in railway passenger trains in the c. 1900s. The Wodonga train line and train station opened in November 1873 when the section of the line from Wangaratta to Wodonga was completed. The expansion of Victorian Railways to the northeast of Victoria occurred after the Victorian Government took over the railways in 1867 and the trains serviced large towns such as Seymour, Wangaratta and Wodonga, as well as smaller towns along the way.The two glass water containers/bottles have historic significance as examples of the equipment used in passenger trains in Australia in the c. 1900s.Two clear glass water containers/bottles with a narrow neck and flaring body, which were used in railway passenger trains c. 1900s. The slightly taller water container/bottle has a metal chain around the neck." c / NSW / TD" on the base of the taller water container.railways water containers, passenger train water containers, passenger trains water bottles, glass water bottles, railway equipment

Used by Eileen or Phyllis Otter, possibly as a perfume bottle. The container retains the smell of perfume.Brass container, with a small screw top lid. perfume bottles, containers

Boer War painted metal container complete with lid. This container was used for storage of a type of Howitzer fuseContainer is stamped with "1", "No 338" and "H"

The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995. J & M Ewan History: J&M Ewan was a Melbourne firm that began by selling retail furniture and wholesale ironmongery. They had substantial warehouses situated at the intersection of 81-83 Elizabeth and Little Collins Streets, the business was established by James M Ewan in 1852. Shortly afterwards he went into partnership with William Kerr Thomson and Samuel Renwick. When Ewan died in 1868 his partners carried on and expanded the business under his name J & M Ewan. The business was expanded to provide a retail shop, counting-house and private offices. Wholesale warehouses adjoined these premises at 4, 6 and 10 Little Collins Street, West. This company provided and sold a large and varied amount of imported goods into the colony that consisted of agriculture equipment, building materials, mining items as well as steam engines, tools of all types and marble fireplaces. They also supplied the Bronze measuring containers in the Flagstaff Hill collection and the probability is that these containers were obtained by the local Melbourne authority that monitored weights and measures in the mid to late 19th century. The company grew to employ over 150 people in Melbourne and opened offices at 27 Lombard St London as well as in New Zealand and Fiji. The company also serviced the Mauritius islands and the pacific area with their steamship the Suva and a brig the Shannon. Robert Bate History: Robert Brettell Bate (1782-1847) was born in Stourbridge, England, one of four sons of Overs Bate, a mercer (a dealer in textile fabrics, especially silks, velvet's, and other fine materials)and banker. Bate moved to London, and in 1813 was noticed for his scientific instrument making ability through the authority of the “Clockmakers Company”. Sometime in the year 1813 it was discovered that one Robert Brettell Bate, regarded as a foreigner in London had opened a premises in the Poultry selling area of London. He was a Mathematical Instrument maker selling sundials and other various instruments of the clock making. In 1824, Bate, in preparation for his work on standards and weights, leased larger premises at 20 and 21 Poultry, London, at a rental of four hundred pounds per annum. It was there that Bate produced quality metrological instruments, which afforded him the recognition as one of one of the finest and principal English metrological instrument-makers of the nineteenth century. English standards at this time were generally in a muddle, with local standards varying from shire to shire. On 17 June 1824, an Act of Parliament was passed making a universal range of weights, measures, and lengths for the United Kingdom, and Bate was given the job of crafting many of the metrological artifacts. He was under instruction from the renown physicist Henry Kater F.R.S. (1777-1835) to make standards and to have them deposited in the principal cities throughout the United Kingdom and colonies. Bate experimented with tin-copper alloys to find the best combination for these items and by October 1824, he had provided Kater with prototypes to test troy and avoirdupois pounds, and samples with which to divide the troy into grams. Bate also cast the standard for the bushel, and by February 1825, had provided all the standards required of him by the Exchequer, Guildhalls of Edinburgh, and Dublin. In 1824, he also made a troy pound standard weight for the United States, which was certified for its accuracy by Kater and deposited with the US Mint in 1827. Kater, in his address to the Royal Society of London, acknowledged Bate's outstanding experimentation and craftsmanship in producing standards of weights, measures, and lengths. An example of a dry Bronze measuring container made specifically for J & M Ewan by possibly the most important makers of measurement artefacts that gives us today a snapshot of how imperial weights and measures were used and how a standard of measurement for merchants was developed in the Australian colonies based on the Imperial British measurement system. The container has social significance as an item retailed by J & M Ewan and used in Victoria by the authorities who were given legal responsibility to ensure that wholesalers and retailers of dry goods sold in Victoria were correct. The container was a legal standard measure so was also used to test merchants containers to ensure that their distribution of dry goods to a customer was correct.Maker Possibly Robert Brettell Blake or De Grave, Short & Co Ltd both of LondonContainer brass round for measuring quantities- Has brass handles & is a 'Bushel' measurement. 'Imperial Standard Bushel Victoria' engraved around container. Container bronze round shape for measuring dry quantities has brass handles & is a 'Bushel' measurement"IMPERIAL STANDARD BUSHEL" engraved around the top of the container. VICTORIA engraved under "J & M Ewan & Co London and Melbourne" engraved around the bottom of the container.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, standard measure, bushel, bushel measurement, j & m ewan, dry measurement, victorian measurement standard, bronze container, melbourne observatory, robert brettell bate

Container with a screw lid with a compass on to top of the lid. Brown in colour.“US” s imbossed into the container.accessories, military history, instruments, compass

A mid 20th century salt cellar was used to store salt. This item is made of bakelite-style hard plastic. Most kitchens would have had one of these.Cream plastic container with red hinged lid."Salt" impressed in red on front of container.saltcellars

Instrument container, part of the W.R.Angus Collection. White enamel oblong container with blue edge arount rim Lid has rounded handle attached to centre by 2 rivets. Has "Made in England" stamped on lid and bottom of container. Container used for sterilising instruments and currently holds instruments related to urinary tract treatment. "Made in England" stamped on lid and bottom of containerflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, instrument container, mira hospital, flying doctor, medical treatment

Displayed in History House.Three glass containers (glass and silverplate) in a novelty carrier in shape of three tennis rackets. 390.1 - Base - metal, three round balls for feet. 390.2 - Mustard container - glass, silverplate lid, spoon (390.3) 390.4 - Salt cellar - glass, silverplate lid with holes in it. 390.5- - Mustard container (not part of original set), silverplate top and spoon (390.6)Front: NPNS (side, container top)

Bristle shaving brush with red handle. Brush fits into a bakelite container with lid.CM A Y6 6o on container|Imperial on Brushpersonal effects-toilet requisites, shaving

The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995. J & M Ewan History: J&M Ewan was a Melbourne firm that began by selling retail furniture and wholesale ironmongery. They had substantial warehouses situated at the intersection of 81-83 Elizabeth and Little Collins Streets, the business was established by James M Ewan in 1852. Shortly afterwards he went into partnership with William Kerr Thomson and Samuel Renwick. When Ewan died in 1868 his partners carried on and expanded the business under his name J & M Ewan. The business was expanded to provide a retail shop, counting-house and private offices. Wholesale warehouses adjoined these premises at 4, 6 and 10 Little Collins Street, West. This company provided and sold a large and varied amount of imported goods into the colony that consisted of agriculture equipment, building materials, mining items as well as steam engines, tools of all types and marble fireplaces. They also supplied the Bronze measuring containers in the Flagstaff Hill collection and the probability is that these containers were obtained by the local Melbourne authority that monitored weights and measures in the mid to late 19th century. The company grew to employ over 150 people in Melbourne and opened offices at 27 Lombard St London as well as in New Zealand and Fiji. The company also serviced the Mauritius islands and the pacific area with their steamship the Suva and a brig the Shannon, the company ceased trading in 1993. Robert Bate History: Robert Brettell Bate (1782-1847) was born in Stourbridge, England, one of four sons of Overs Bate, a mercer (a dealer in textile fabrics, especially silks, velvet's, and other fine materials)and banker. Bate moved to London, and in 1813 was noticed for his scientific instrument making ability through the authority of the “Clockmakers Company”. Sometime in the year 1813 it was discovered that one Robert Brettell Bate, regarded as a foreigner in London had opened a premises in the Poultry selling area of London. He was a Mathematical Instrument maker selling sundials and other various instruments of the clock making. In 1824, Bate, in preparation for his work on standards and weights, leased larger premises at 20 and 21 Poultry, London, at a rental of four hundred pounds per annum. It was there that Bate produced quality metrological instruments, which afforded him the recognition as one of one of the finest and principal English metrological instrument-makers of the nineteenth century. English standards at this time were generally in a muddle, with local standards varying from shire to shire. On 17 June 1824, an Act of Parliament was passed making a universal range of weights, measures, and lengths for the United Kingdom, and Bate was given the job of crafting many of the metrological artifacts. He was under instruction from the renown physicist Henry Kater F.R.S. (1777-1835) to make standards and to have them deposited in the principal cities throughout the United Kingdom and colonies. Bate experimented with tin-copper alloys to find the best combination for these items and by October 1824, he had provided Kater with prototypes to test troy and avoirdupois pounds, and samples with which to divide the troy into grams. Bate also cast the standard for the bushel, and by February 1825, had provided all the standards required of him by the Exchequer, Guildhalls of Edinburgh, and Dublin. In 1824, he also made a troy pound standard weight for the United States, which was certified for its accuracy by Kater and deposited with the US Mint in 1827. Kater, in his address to the Royal Society of London, acknowledged Bate's outstanding experimentation and craftsmanship in producing standards of weights, measures, and lengths. An example of a dry Bronze measuring container made specifically for J & M Ewan by possibly the most important makers of measurement artefacts that gives us today a snapshot of how imperial weights and measures were used and how a standard of measurement for merchants was developed in the Australian colonies based on the Imperial British measurement system. The container has social significance as an item retailed by J & M Ewan and used in Victoria by the authorities who were given legal responsibility to ensure that wholesalers and retailers of dry goods sold in Victoria were correct. The container was a legal standard measure so was also used to test merchants containers to ensure that their distribution of dry goods to a customer was correct.Maker Possibly Robert Brettell Blake or De Grave, Short & Co Ltd both of LondonContainer bronze round shape for measuring dry quantities has brass handles & is a 'half-bushel' measurement"IMPERIAL STANDARD HALF BUSHEL" engraved around the top of the container. VICTORIA engraved under "J & M Ewan & Co London and Melbourne" engraved around the bottom of the container.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, standard measure, bronze, peck measurement, j & m ewan, victorian standard dry measurement, bronze container, victorian standards, melbourne observatory, robert brettell bate

These items were used or were available for sale by chemists in Orbost. Chemists who worked in Orbost included Henry Cottman; James Alfred Dubois Williams; Harry Arthur Murray; Miss P.E .Mason (Phyllis Estelle?); Miss Sybil Monica Buzza; Thomas James Frayer; Australia Shaw; James David Torley; John William Zimmer; Dalkeith William Steele; William Thomas Hollingsworth; E.E. Cohen; R.S. Anderson; Frances John Perry Faith Everard Pardew and Charles Anthony Wurf. The tin was designed and used by the Colonial Sugar Refining Co. to store and sell golden syrup which is a by-product of cane sugar, molasses and treacle. The practices of early pharmacists are revealed through these items. The items have a clear association with Orbost.3210.15 is a rusty tin of CSR Golden Syrup. It is a yellow, red, brown, white tin with a black lid. used to sell and store golden syrup. The kilogram tin has the words 'golden syrup' printed in large red letters. There is a recipe for ANZAC BISCUITS on the back of the tin. Inside two concentric circles - "FROM THE AUSTRALIAN CANEFIELDS NATURALLY GOLDEN" around a drawing of a sugar refinery. 3210.16 is a glass jar with a black metal lid. It contains small beakers, rubber tubing, stoppers and vials. on front in red print - "FROM THE AUSTRALIAN CANEFIELDS NATURALLY GOLDEN ; CSR GOLDEN SYRUP ; GUARANTEED PREMIUM QUALITY ; NET 1KG ; SEE BACK FOR DELICIOUS RECIPE"pharmacies-orbost zimmer-john tin-golden-syrup medical-equipment

Probably belonged to the Locke familyClear glass tableware. Two tapered conical decanters with stoppers. One clear glass jar with a stopper - a lid with a molded knob.glassware containers decanters jar tableware

This type of match container was issued to soldiers in World War 1, to carry phosphorous matches safely. These matches could ignite by being rubbed together and often did so when carried in bags or pockets. This one was the property of a member of Linton's Jennings family.Cylindrical brass container with lid, bottom hatched. Lid engraved or stamped "W. JENNINGS."."W. Jennings".w. jennings, world war 1914-1918, containers, matches

This veterinary equipment was found in an old walk-through dairy at Wombat Track. The instruments have been identified by Vet, Peter Honey,(9.1.2019) as instruments used to gain access to a teat cavity in a cow and to remove a blockage in the teat. They are possibly an improvised tool used c 1900-1950's.These items are representative of items used in Orbost on dairy farms in the first half of 20th century.A small set of instruments and container made of metal -possibly stainless steel. The instruments are a small spoon and two probes.On outside of container : D.C.L. SCOTCH WHISKYbistoury veterinary-equipment dairy farming

Rear of container - information. RAN SUBMARINE SQUADRON 25TH ANNIVERSARY. NUMBER NAME LAID DOWN LAUNCHED FIRST COM'D 57 OXLEY 2/7/64 24/9/65 27/3/67 59 OTWAY 29/6/65 29/11/66 22/4/68 70 OVENS 17/6/66 4/12/67 18/4/69 60 ONSLOW 26/5/67 3/12/67 22/12/69 61 ORION 6/10/72 16/9/74 15/6/77 62 OTAMA 28/5/73 3/12/75 27/4/781. & 2. Unusual shaped ceramic container to be used for Port. Black glossy glaze with illustration. 1. Front - 2 gold dolphins and decoration in gold, white and red with inscription in silver "ANNIVERSARY/ 25th" Back - list of RAN Submarine Squadron vessels. 2. Back - in shape of crown with - list of RAN Submarine Squadron vessels.Information print in white on container. See Context Historical.souvenirs, anniversary, ran, submarines

Used for storing various threads for mending in the home - cotton, silk, wool nylon.A decorated brown lidded round container coated inside with black and brown type lacquer. The outside of the container and lid has patterns painted by hand in yellow and red of a bird, ying and yang symbols and oriental script all surrounded in black lined sections. It appears to be made from papier-mache which is layers of cardboard glued together and tightly compressed. This can be seen by the damage sections which grey cardboard shows though. It would have been lacquered over and painted. The container has a variety of sewing items and mending threads for stockings, socks and other work. Some pearl buttons included.As mentioned above, the container has various patterns painted on it. The sewing items include brands of threads for sewing work - Darneezi, Eagley, Rite Tone, Clark's Filosheen,Chadwick's Wool and Nylon, Nylusta.sewingcontainer, threads, containers, sewing equipment

Commemorative Port issued in 1995 to celebrate the 40th anniversary of the opening of St Mary's Church in Greensborough.Ceramic wine bottle with cork in cardboard container, black and whiteBrown Brothers Milawa Vineyard Australia: Viictorian Port on cardboard containerst marys parish greensborough, st marys catholic church greensborough, brown brothers

Permanent treatment markings, glass tube with measurements, paper containerglass tube showing measurements paper container - permanent - amber stainpermanent marking stain