Between the 1950s and 1970s, road safety was redefined as a medical and social problem, rather than a moral and legal one. This was a time before seat belts. The Road Safety Colouring Competition was a free colouring competition for children, organised by Commonwealth Oil Refineries Ltd., started in August 1954 with the , aims of teaching road safety. There were 1,000 prizes, valued at £1,200. The winner would receive a £100 bursary and a free plane trip with one parent to Canberra to receive the prize from the Federal Minister for Transport, Senator.G. McLeay. This booklet is the one used by the children in Orbost in 1958. This booklet was designed to promote road safety awareness, with messages and activities specifically considered for children. Its aim was to teach road safety in a fun, but educational way. This item was an important educational tool. A booklet of competitions - Road Safety- Victorian Section for Children It was issued by the Australian Road Safety Council. The front cover is blue, red, black and white. It contains crosswords, colouring competitions with entry forms.road-safety competitions-colouring

These weights would have been used with a Beam Balance. Forceps were to be used when moving weights from the box.Set of 17 weights in a hinged timber box.On Lid "Box No. 8. Check the weights before & after using them. Always use the forceps to handle the weights."weights, scientific instruments, grams, milligrams, beam balance weights

All Things Safety Wear sell products including Safety products, Workwear, Screenprinting, Embroidery and Bolts & nutsBusiness card printed both sides in black and yellow; with adhesive sticker printed in black and yellow, one sidesafety products, sherbourne road briar hill

Troy weight is a system of units of mass from an unknown origin. While the name Troi is believed to have come from Troyes in the north east of France the system used primarily in the precious metals industry and adopted in Australia originated in 15th century England. Troy weight units are the 'grain' and 'pennyweight' (24 grains), the troy ounce (20 pennyweights), and the troy pound (12 troy ounces). One troy ounce equals 31.1034768 grams. The troy ounce and grain were also part of the apothecaries' system and was long used in medicine, but has now been largely replaced by the metric system (milligrams). When the Weights and Measures Act was passed in Victoria in 1862 local inspectors were established throughout the colony to ensure accuracy particularly in the weighing of gold. By the 1870's each local council had a set of standards that were used to test the scales, weights and measures of local merchants and businesses. This set would have been de commissioned some time after 1947 and was offered back to the Borough of Eaglehawk in 1989. Hinged, lockable wooden box with brass handle, hinges, latches and lock. Remnant wax on front face of box above and below lock. Interior of box is lined with purple velvet which is worn in several places. Box houses nine troy weights ranging in size from 100oz Troy to 2oz Troy. 1oz Troy is missing. Accompanying set is a two page letter from Weights and Measures Branch of Consumer Affairs offering set back to the Borough of Eaglehawk in 1989. Troy Weights: a) 100oz Weight, 68 mm Diameter at base x 113 mm H b) 50 oz Weight, 53 mm D x 90 mm H c) 30 oz Weight, 45 mm D x 77 mm H d) 20 oz Weight, 39 mm D x 65 mm H e) 16 oz Weight, 37 mm D x 60 mm H f) 8 oz Weight, 30 mm D x 47 mm H g) 4 oz Weight, 24mm D x 36 mm H h) 2 oz Weight, 19mm D x 28 mm H i) 1oz missing Hinged Wooden Box: Part j)171 mm H x 300mm W x 196 mm D Typed two page letter: Part k) 295 mm H x 210 mm W x 1 mm Top Troy: Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD. Side Troy : Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD above a series of date stamps recording every time the weight was tested. Date stamps: 30.4.1866; 16.9.81, 30 12.86; 1.2.92; 10.5.97; 15.1.04; 10.2.09; 17.12.14; 20.4.20; 29.9.25; 23.1.31; 18.6.36; 14.7.41: 11.7.47 Exterior Top of Box: Remnant of paper pasted to wood. Faint printed text 'ON HIS MAJESTY'S SERVICE'.borough of eaglehawk, making a nation exhibition, city of greater bendigo commerce

Instruction - 108 pages + 9 fold out drawings glued and stapled in at the rear + card covers with red cloth binding, rounded right hand edges, centre stapled. Titled "Instruction Pamphlet S-100, Air Brake and Safety Car Control Equipment", published July 1924 by the Safety Car Devices Co. St Louis. Includes the M28 Brake valve. Describes in detail the rules for operation, parts, description, M28 Brake Valves, Maintenance, Practical car tests, hints, defects. The 9 drawings at the rear of the document give detail arrangements of the piping and control equipment. Book scanned into three sections. See also Reg Item 3513 for another similar document.on top of first page "C. Hodgson"trams, tramways, electrical engineering, electrical equipment, air compressors, brakes, instructions, maintenance, controllers

This container of 11 boxes of safety matches would have been a common item in a household during the first half of the 20th century and would have been used for the safe lighting of lamps, candles, room heating (fires), bath heaters, cigarettes, pipes etc. Safety matches came into use in the first half of the 19th century and the safety aspects have been improved after that time. Safety matches are still used today - for instance, when camping or in times of power failure. These matches are of interest as an example of household items in common use in the past. These are eleven boxes of safety matches (one box missing) wrapped in a buff-coloured paper cover with a label in red, blue and white colours with printing and an image of a dark-haired woman set against a white flame. Each box contains about 60 matches with a label similar to the one on the outside packaging. The matches are wooden with pink tips. The boxes have a rough surface on the side acting as a striking mechanism. The back of each box has a message containing some thoughts from thinkers and philosophers from the past.Ever-Brite Safety Matchesvintage lighting, safety matches, everbrite matches

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Letter from Eric Wigglesworth, Chairman of Federal Education Committee, Safety Institute of Australia. He outlines the need for Occupational Health and Safety courses to be in tertiary institutions. There is concern that in the past a number of non-educational organisations opted to offer courses of little content and less validity.Four sheets of A4. Third sheet printed on both sidesLetterhead of Safety Institute of Australia and Ballarat College of Advanced Educationviosh, victorian institute of occupational safety and health, eric wigglesworth, safety institute of australia, occupational health and safety, derek woolley, federal education committee, letterheads, ballarat college of advanced education

Early matches. Brown paper package containing eleven boxes of safety matches. Made in Australia. Product information printed on red and blue and label attached to brown paper.Bryant & May's Crown Made in Australia Safety Matchesbryant & may, matches, crown matches

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. The stimulus for this project to investigate health and safety in art teaching and to suggest cost effective control measures, arose from concerns that had been expressed by some members of staff within the Arts Faculty at the Ballarat College of Advanced Education about aspects of health and safety at their workplace. As a non-artist it is hard to attempt to describe the artists' perspective of their working environment. Within the artistic community there is a great concern for individuality and this is expressed in the artists' work. The need for flexibility and spontaneity is a vital and intuitive part of the artistic environment. Consequently codes and standards of practice that would restrict this environment ethic are unlikely to be viewed favourably by artists. Comments made by Bob Hall; Project Officer BCAESixty pages stapled together. Type written with illustrations relevant to safety issues. Front has clear perspex sheetviosh, victorian institute of occupational safety and health, bob hall, project officer, commission, ballarat college of advanced eucation, health and safety in the arts, control measures, codes and standards of practice, chemical environment, protective equipment, management of environment, noise, machines, temperature control

Safety razors were fist produced in the late 1800s by the Star Razor Company in U.S.A. and it was a former employee of this company that produced the Gem Safety Razor in 1898. The Gem razor, to be produced in later years by the American Safety Razor Company, became one of the world’s most popular razors and in the 20th century it was the major competitor to the Gillette razor produced in the U.S.A. The safety razor has been largely superseded by the disposable razor blade and the electric razor. This safety razor has no known local provenance but it is retained as an example of the type of safety razor used in households for the most part of the 20th century.This is a silver-coloured Gem safety razor in a rectangular green Bakelite box. The box lid has metal pins acting as hinges and inside the box there are moulded sections to ensure the razor fits snugly into the box. The razor handle has an etched decorative pattern and the top part opens so that a blade can be inserted. There is a blade in this section. On box: ‘Gem’ Blade: ‘Gem Double Life, Gem Blade, British Made’ Inside the razor: ‘Gem Brooklyn New York Made in U.S.A.’ gem safety razor, history of warrnambool

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Document outlining the Vision, Mission, Aims, Goals and Principles of VIOSH Australia. The main vision is to provide the best undergraduate, graduate and industry focused OHS program in Australia and Asia - Pacific Region. Improvement in occupational health and safety within workplaces in Australia and overseas and stimulate best practice within the University of Ballarat is the mission. Detailed statements covering Aims, Goals and Principles outline how this will be achieved.Thirteen A4 pages, typed. Coloured sections.Symbols for VIOSH, CSIRO, SafetyLine, Safety Institute of Australia, Worksafe Australia,Canadian Centre for OH&S. Health and Safety Executive (United Kingdom), National Institute for OH&S (United States), Occupational Health and Safety (United States), International Occupational Safety and Health Information (Finland)viosh, victorian institute of occupational safety and health, university of ballarat, vision, mission, aims, goals, principles, research and colsultancy, courses, viosh working papers, noise control in mining, resources, australia, csiro, safetyline, safety institute of australia, worksafe australia, canada, canadian centre for occupational health and safety, united kingdom, health and safety executive, united states, national institute for occupational safety and health, occupational health and safety administration, finland, international occupational safety and health information

This certificate was awarded to the Wodonga Freightgate for achieving targeted safety standards as set down in the VLine program between July 1994 and June 1995This certificate recognises the safety standards achieved by workers at the Wodonga freight centre in Northeast Victoria.A framed certificate in recognition of the achievement of safety standards at Wodonga Freightgate.vline safety, wodonga railway, wodonga freightgate

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Banner used for Open Days and Expos to advertise/promote the VIOSH Program. Product made by BannerUp. When retracted it is easily carried in a heavy cotton fabric bag, black.Retractable banner in black carry bag.Occupational Health and Safety. "BannerUp" on caseviosh, victorian institute of occupational safety and health, banner, occupational health and safety, open days, exposes, promoting course

A mining safety cage was used in a mine lift. It was fitted with mechanisms to prevent the cage from dropping if the lifting rope broke. In the 1870s in Victoria, deaths and injuries from falling cages in vertical shafts of gold mines were a major problem. The inventor of this safety cage was Robert Allan, a machinery maker of Creswick Rd, Ballarat. He said his cage featured a ‘dissolving’ fulcrum. Others called it an eccentric (off centre) system. Note the pair of clutch levers designed to grab the side guides if tension ceases in the suspending rope from the poppet head pulley. Also, the hinged ‘lids’; designed to protect miners trapped in a braked cage from falling rope, and to enable rescue of the miners. This model was presented to The Ballarat School of Mines Council in November 1876. This model was shown at the Smeaton Show in November 1874, Ballarat School of Mines Museum from 1876, and examined by the 1879 Victorian Board of Inquiry (Pg 15 of FedUni Catalogue 3437) From the Argus of 13 November 1874: At Smeaton Show, Robert Allan of Ballarat won 1st prize for a Model of a Mining Cage, a Butter working machine, a Cheese press and a Curd Mill. By 1878 an Allan Safety-Cage was in operation in the Number 6 shaft of the Band and Albion Consols mine in Ballarat. This cage was judged the best inspected by the Victorian Board of Inquiry by 1879, p. 39.Mining was a big industry in Ballarat in the late 1800s and a lot of deaths were recorded because of mining accidents, the development of the mining safety cage brake limited the deaths and injuries from falling cages in vertical shafts. The model also has links to the Ballarat School of Mines, being presented to the council in 1876. Ballarat School of Mines is the oldest Technical School in Australia and is a predecessor of Federation University. The model is significant to Ballarat's mining history.Model of a mine safety cafe. A grey painted wooden frame with metal model of cage and safety brake system. When tension ceases in rope a pair of crutch levers grab strongly onto the wooden guide strips which run down the sides of a vertical shaft. This safety cage was discussed in "Safety Mining Cages. Report of the Board of Enquiry on Safety Cages 1878-9; together with proceedings of the Board and Appendices".safety cage, mine cage safety brake, robert allan, model, safety cage model, machine maker, millwright, mining, gold mining, tools, equipment, victorian board of inquiry

Yarra Trams has employed a small team of security staff in an attempt to improve network safety.Digital image of a newspaper clipping from the Age titled: "New team on trams hopes to keep your safety on track"tramways, safety

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge Letter had been sent to the National Safety Council of Australia informing them of the recipient of their trophy for 1983. Council's reply form Gordon Lewis, addressed to Dennis Else, says they will obtain the trophy from previous winner and inscribe new winner's name on it and replica. Suggestion is that the trophy be kept at the College and displayed. This practice is followed at other Colleges. The Federal President Mr Clive Peterson to make the presentation. Derek Woolley replied and explained the College was in an interim period between Dennis Else and Derek Viner. Invited Gordon Lewis to attend the presentation.Two A4 page typed. .1 Cream colouredLetterhead of National Safety Council and Ballarat College of Advanced Educationviosh, victorian institute of occupational safety and health, national safety council of australia, gordon lewis, nsca trophy, andrew barnard, dennis else, derek viner, derek woolley, federal president of nsca, clive peterson

University of Ballarat is a predecessor institution of Federation University Australia. Federation University VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree – on the basis of extensive work experience and knowledge.Poster for Victorian Institute of Occupational Safety and Health (VIOSH) viosh, viosh australia, occupatonal health and safety, victorian institute of occupational safety and health, sign, university of ballarat, poster

Brass boxing 1trophy from Portsmouth, EnglandR.N. Open Championsips 1965 Light Middle Weight Runner - up.boxing, royal navy boxing plaque.

The disc-shaped design of these 1LB and 2 LB metal weights enables them to be stacked one on top of the other. The weights are used with a balance scale to accurately weigh the mass of items such as grain, sugar, meat or potatoes. They could have been used in retail or wholesale businesses like a general store or a grain merchant’s premises. The user would place either one or both of these weights on one side of a balance scale. Goods would then be placed onto the other side of the scale until the beam between both sides of the scale was level, showing that the weight of the goods was as heavy as the weight or weights on the other side. These two weights are marked in Imperial units. An Imperial Standard 1LB is equal to 453.592grams. The British Weights and Measures Act of 1824 defined official standards for weights and measurements. This ensured that uniform measurements would be used for trade throughout the Empire. Towns and districts would have an official set of Imperial Standard Weights and Measures. Inspectors periodically used this official set to check the accuracy of traders’ own weights and measures. There would be penalties such as fines or imprisonment for people who broke these laws. The State of Victoria had its own Weight and Measures Act in 1862 and a decade later the inspectors in local councils used their local set of weights and measures to test the local businesses measuring equipment. In the nineteenth century the Victorian Customs Department carried out this role but this was handed over to the Melbourne Observatory at the beginning of the twentieth century. The Measures Branch then followed on with this task from the 1940s until 1995. Australia began converting to the metric system in the 1960s, beginning with its money. The conversion from imperial to metric units of measurement in Australia took place from 1970 and was completed in 1988 when metric units became the only legal unit of measurement. Imperial Standard weights; set of two disc-shaped weights designed to stack one upon the other. Inscriptions are marked in relief. "IMPERIAL STANDARD 1LB" [weight 1], "IMPERIAL STANDARD 2LB" [weight 2]warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, wieght, weights and measures, imperial standard weight

The State Electricity Commission of Victoria produced and displayed safety signs for their employees during the construction of the Kiewa Hydro Electric Scheme.KHES was constructed from the late 1940s to early 1960s and included the construction of Mt Beauty and Bogong townships. Safety was a concern for the SECV towards its workers. Metal black print on white background with yellow 'emphasis' at the top - 'Safety'. "Instructions for the use of / Grinding Wheels". There is a circular hole in each corner with a black frame around the perimeter.state electricity commission of victoria, kiewa hydro electric scheme, safety sign, grinding wheels

The State Electricity Commission of Victoria 1921 to 1993 was responsible for electricity generation in Victoria and the operation of three Provincial Tramways. It had a strong safety focus for the time. These certificates show the safety focus and the reporting of safety performance to employees and visitors.Demonstrates the safety record of the SEC Ballarat depot, has a strong association with the workers and Yields information about their performance and dates.Set of three Timber framed certificates, glass front, black painted side timber with brown paper or card or Masonite backing and masking tape around the edges, titled "Award of Honour - Industrial Safety", that the Tram Depot Ballarat had established a meritorious record for safe work with no lost time. Gives the period and the date of the away. Signed by the Manager - A. W. Linaker? or F. White and the Chairman of the Safety Committee "Wm K. Trusler". Screw holes in the top and the bottom of the frame centrally. .1 - dated 12-1-1962 for 1 year and 103 days. .2 -dated 19-6-1963 for 1 year and 155 days. .3 - dated 19-6-1964 - for 1 year.trams, tramways, depot, sec, safety, personnel