A colour photograph of the sign that was placed at Steavenson Falls in Marysville in Victoria to commemorate the switching on of the floodlights at the falls.A colour photograph of the sign that was placed at Steavenson Falls in Marysville in Victoria to commemorate the switching on of the floodlights at the falls. This event took place on 3rd November, 1972 and was carried out by the then Minister for Tourism Murray Byrne M.L.C. The falls are floodlit every evening until 11.30 p.m. The Steavenson Falls is named after the Victorian Assistant Commissioner of Roads and Bridges, John Steavenson who arrived in Victoria in the early 1860s.THE FLOODLIGHTING OF/ STEAVENSON FALLS/ WAS OFFICIALLY SWITCHED ON/ BY/ THE HONOURABLE/ MURRAY BYRNE, M.L.C.,/ MINISTER FOR TOURISM/ ON 3RD NOVEMBER, 1972 '05 1 3 3.01.05 Marysville (from Helga Walsh)steavenson falls, floodlighting, 3rd november 1972, murray byrne m.l.c., minister for tourism, waterfalls, marysville, victoria, john steavenson

On Tuesday 28th September 1937, to the applause and cheering of a crowd of more than 300 people, a ceremonial ribbon was cut with a ‘beautiful pair of silver scissors’ by Mrs W H Everard, wife of local MP William Everard. The ribbon cutting ceremony was to officially turn on the mains electricity supply to Whittlesea and district. The moment the ribbon was cut there was a ‘blaze of light’. There were initially 78 customers, including the Shire of Whittlesea which had contracted the SEC to supply street lighting in Whittlesea, Yan Yean, Mernda and South Morang (Advertiser, Friday 1st October 1937, page 1). This ribbon is possibly a fragment of the official opening ribbon that was stamped with the date and details of the switching on of electricity in Whittlesea and given to patrons. Commemorative Ribbons. Silk ribbon, white, stamped with details commemorating the switching on of electricity in Whittlesea on 28 September 1937.Whittlesea / 28 Sep 1937 / Electric Light / Official Switching on / Ceremony electricy supply, w h everard, whittlesea district

Transformer with switchable voltage. Voltage ranges from 110 to 240. This means it can be in different countries. It has a 6 volt input for light/lamp. Made in 1940s. The core of the transformer is laminated steel, each layer insulated to stop from over heating. The transformer is still in working order.Transformer with switch for different voltage settings. Globe connected to unit. Universal transformertransformer, switch, voltage, light, laminated steel, insulated, switchable, universal

Prepared by the MMTB for the design of pointwork or switches.Yields information on the design of trackwork.Set of two MMTB Drawings of Switches, points and turnout details .1 - P3738 - Diagrams of Switch Data - actual switch blades - dated 30-10-1926 .2 - P9312 - Lorains No. 3 Switch Spiral Transition - dated 5/6/1942.2 - dated stamped 5 July 1974trackwork, points, switches, mmtb, tramways

Type of switch fitted to Melbourne W class trams for switching the line breaker on or off. This switch controls power to the line breaker activated by the tram controller. Had been fitted to the Restaurant tram No. 3 or Cuthberts 939. Was found to be defective - the power was available to the controller even when switched to the OFF position, that is, failed unsafe. Was replaced 4/11/2015 from a spare. Has the name of the manufacturer on the cover. Demonstrates a switch that failed unsafe.Tramcar equipment - line breaker switch - fibre material box and cover containing electrical switch and 10Amp Cartridge fusew class trams, cuthberts 939, switches, line breakers, faulty equipment, safety

Mrs Coels was born in Warley Hospital and lived all her life in Ventnor.invitation Card to Switching on of electricity supply to Ventnor District, Friday 13th December 1963. Mrs Edith Coels performed the switch-on ceremony. Card in Presentation Box - Picture FrameCommittee of Ventnor No. 2 S.E.C. Extension Group Switching On Ceremony At Ventnor Hall on Friday, 13th December, 1963 at 8 pm McNabb's Orchestra Good Supper Ticket 7/6switching on ceremony ventnor, mrs coels, cefn & phillis price

Switches from HMAS Canberra taken prior to scuttling in October 2009Ex HMAS Canberra was the first ex naval vessel to be scuttled off Barwon Heads to form an artificial reef and to facilitate recreational diving.3 Marine Alarm Switches on metal frame; General, Unknown usage, Collision AlarmContact Type S-2JRM3A-2switches, navy ships, hmas canberra

Type used by RAAF Radar station at Wilsons Promontory Lightstation (RS 14) for backup communications 1942 - 1946. This is an AT5 MF/HF 50 watts radio transmitter with black face and multiple dials and switches; There is also an AR8 radio receiver with a brown face and various dials and switches; and an AT5 radio aerial coupling unit with black face and dials and switches in the WP collection. They functioned as a set and were manufactured in 1938 at the Ashfield, Sydney workshop of AWA (Amalgamated Wireless Australasia Ltd, later AWA Ltd), Australia’s largest electronics manufacturer and broadcaster. They are rare outside Australia as they were seldom exported to other air forces, and remained in service until the late 1950s. An AT5 transmitter and AT5 coupling unit are held in Sydney’s Powerhouse Museum.The three units in the Wilsons Promontory Museum were deployed by the RAAF in WWII and represent the types of communications equipment used at the 14 Radar Station, Wilsons Promontory. It is not known, however if these particular examples were used at the lightstation and are part of the same set. They have interpretive relevance to the collection, but their significance to the lightstation is dependent on whether they have a direct historical association with the radar station that operated there. The units will have first level contributory significance if it is confirmed they were used at the Wilsons Promontory Radar Station.Radio receiver, grey metal face with multiple dials & switches

This was the switch on ceremony for the power going to Bonang. The ribbon was cut by Mr Ted Ingram at the age of 100. Ted Ingram, was one of 22 children. The Ingram family originated from the Bombala, Bonang and Delegate area, migrating throughout out the rich farming country of East Gippsland in the early 1900s.This is a pictorial record of a significant event in the history of East Gippsland.A black / white photograph of two men cutting the ribbon at an official occasion. The ribbno is strung between to models of electricity pylons. On the table to the left is a kerosene lantern.on front - "Bonang Switch on, Mr Ted Ingram, age 100 years"bonang-electricity-supply ingram-ted

When this AVOMETER was being utilised in the early 1950's it was at the "leading" edge of electrical measuring instrumentation.The first meter was produced by Automatic Coil Winder and Electrical Equipment Co. in 1923. This model was produced in the time from 1933 to 1951 when it was superseded by the most popular model, Model 8 (1951 to 2008).This AVO meter brought the measuring of three electrical power indicators i.e., amps, volts and ohms into one measuring unit. By using a "one fits all" unit, the carrying of separate measuring devices was reduced considerably. The need for a mountainous and a large area of operational requirements, such as the SEC Vic Kiewa Hydro Electricity Scheme, to minimise the weight of equipment carried by electricians and technicians was of the utmost relevance. The significance of this meter to the Kiewa Valley region relates to the impact of modern technology (at that time) upon a mainly rural environment. This equipment shows how the boost of "modern" equipment into the area because of the "Hydro Scheme" was facilitated a lot faster than would have taken under "normal" evolutionary time. The speed of information on all "new technology" had a relatively slow assimilation rate to those living in rural communities. This AVOMETER is a Model 7 MKII, production pre 1951. This meter measures electrical Amps, Volts and Ohms and has two internal batteries for its power. The main casing is made from aluminium with a bake-lite front. The front has a "window" detailing, with a needle pointer, the amount of electrical power being tested. There are two big dial switches, detailing Direct Current(DC) and Alternating Current(AC) when reading measurements of Ampere, Voltage and Ohms for power. This meter took the place of three or four meters used earlier. Modern meters (2000 onwards) have become digilised and are considerably lighter in weight and smaller. There are two electrical connection leads (one black and one red) each has a removable clasp and is 125cm long.Molded on the front centre panel " UNIVERSAL AVOMETER". Below this and above the left hand dial "D.C. SWITCH" .Above the right hand switch the right "A.C. SWITCH". On the left of each switch is an arrow pointing to it.The left switch is marked with a "+" and the right one with a "-". There is a "divisional 2" mark. Between and below the dials is "CUT OUT" plunger.electrical meters, electrical equipment, sec vic., state electricity commission of victoria, mt beauty, bogong village

Created prior to the Mowat-Wormald development, this prototype emits a beam of ultrasonic sound that detects reflection from objects and obstacles as well as vibrate when the object is within range. The rate of vibration increases the distance reduces and was designed to be used in conjunction with other mobility aids such as a cane or a dog. With a simple toggle switch, it could be operated easily or stored safely away due to it's compact size.A small black rectangular metal container with mesh on one aend and a switch and tuning dial on the other end.Model MS01assistive devices, orientation and mobility

Switch-foot is a classic publication out of Australia 2005. This 210 page hardcover book has many of the immortal surfing images from the golden era in surfing from photographers such as Albe Falzon, George Greenough and Jack Eden. Stories from: George Greenough looking at his simple genius and his movie magic with ‘Dolphin Glide’ and ‘Behind the Scenes.’ The unmasking of the truth behind Peter Drouyn, 12 legends of the Lens (images from the golden era) The telling of Dick Van Straalen’s story and his current relationship with Dave Rastovich The art of Harry Daily Global surf travel with Colas Thomas Campbell drops by Rasta and friends music with the exploration into the mystery of the art of jamming Discussions about sustainable surfcraft production with Tom Wegener, the unveiling of new school talent within music and photography and also talking to important leaders in the field of classic surfing to gather information on surfboard design, single fin surfing and fin dynamics. Music from low pressure sound systems in the story titled ‘the art of jamming’ A significant publication that explores art, photography and music in surfing culture.Switch-foot (surfing art music) is a hard copybook of surfing photography with a black cover featuring 5 art panels and one panel with text. 'Switch-foot surfing art music'.ISBN 0-646-45057art, surfing, jack eden, switchfoot, music, surf photography, alby falzon, george greenough, peter drouyn, dolphin glide, dick van straaleen, jim banks, peter crawford, mark richards

The relatively large battery charger is in a metal cabinet that has dials and switches on the face. It was used by the PMG to charge radio telephone batteries between the 1960s and 1990s. Cape Schanck Lightstation also has a battery charger that is part of a set of items associated with the electric operation of the lighthouse Meets first level threshold.Battery charger encased in a large metal cabinet, with black dials, with white faces & switches on either side of the front of the cabinet. Makers label as bottom of cabinet. Some staining." Constant Potential Rectifier....."

Type used by RAAF Radar station (RS 14) for backup communications 1942 - 1946. This one is an AT5 radio aerial coupling unit with black face and dials and switches. They functioned as a set and were manufactured in 1938 at the Ashfield, Sydney workshop of AWA (Amalgamated Wireless Australasia Ltd, later AWA Ltd), Australia’s largest electronics manufacturer and broadcaster. They are rare outside Australia as they were seldom exported to other air forces, and remained in service until the late 1950s.202 An AT5 transmitter and AT5 coupling unit are held in Sydney’s Powerhouse Museum.203 The three units in the Wilsons Promontory Museum were deployed by the RAAF in WWII and represent the types of communications equipment used at the 14 Radar Station, Wilsons Promontory. It is not known, however if these particular examples were used at the lightstation and are part of the same set. They have interpretive relevance to the collection, but their significance to the lightstation is dependent on whether they have a direct historical association with the radar station that operated there. The units will have first level contributory significance if it is confirmed they were used at the Wilsons Promontory Radar Station.radio aerial coupling unit grey metal face with multiple dials & switches

Type used by RAAF Radar station Wilsons Prom (RS 14) for backup communications 1942 - 1946. This is an AR8 radio receiver with a brown face and various dials and switches; They functioned as a set and were manufactured in 1938 at the Ashfield, Sydney workshop of AWA (Amalgamated Wireless Australasia Ltd, later AWA Ltd), Australia’s largest electronics manufacturer and broadcaster. They are rare outside Australia as they were seldom exported to other air forces, and remained in service until the late 1950s.202 An AT5 transmitter and AT5 coupling unit are held in Sydney’s Powerhouse Museum.203 The three units in the Wilsons Promontory Museum were deployed by the RAAF in WWII and represent the types of communications equipment used at the 14 Radar Station, Wilsons Promontory. It is not known, however if these particular examples were used at the lightstation and are part of the same set. They have interpretive relevance to the collection, but their significance to the lightstation is dependent on whether they have a direct historical association with the radar station that operated there. The units will have first level contributory significance if it is confirmed they were used at the Wilsons Promontory Radar Station.The units will have first level contributory significance if it is confirmed they were used at the Wilsons Promontory Radar Station.Radio tuning unit, brown metal face with multiple dials & switches.Yes

Card with decoration of blue abstract electric lines on pale blue background. White square in centre of card with dark blue printing. Ticket is printed with details of an official ceremony, street procession, a banquet and a fancy dress ball to celebrate the connection and switching on of electricity to the township of Linton in 1939. Text: LINTON'S / GRAND SWITCHING-ON CARNIVAL / ON / THURSDAY, SEPTEMBER 7, 1939 / Official Ceremony 7.30 p.m. Street Procession 8 p.m. / BANQUET IN FIRE BRIGADE HALL 8.30 p.m.electricity, celebrations

Item used to switch on or off the red tail lights circuit on a tram. Made by the SECV. The board was located next to the 6V battery that was used to power the tram tail lights when the trolley pole was being reversed under a passenger seat.. Demonstrates an item fitted to a tramcar to switch an external lighting circuit.Softwood wood board with a bakelite two pole switch marked "on" and "off" and a Federal 250V 15A rewireable ceramic fuse attached. Has remnants of cloth covered copper wire on the rear. See item 9024 for an associated drawing."12" in blue pencil.fuse, tram 14, tramcars, tramcar maintenance, electrical switching

Both the Light switch and Door knob were used in Box Cottage during the late 19thC and early 20thC by the Box and Rietman families. William and Elizabeth Box purchased the two ten acre Lots of land with the Cottage in 1868 where they raised their family of 12 children and developed a flower garden producing seedlings. August and Frieda Rietman rented the Cottage 1917 with 1 acre of land and purchased it in 1935 where they raised 2 children while August established Rietman's Landscaping Pty Ltd making pressed concrete garden furniture. Porcelain is a ceramic material made by heating materials, generally including kaolin, in a kiln to temperatures between 1,200 and 1,400 °C The toughness, strength and translucence of porcelain, relative to other types of pottery, arises mainly from vitrification and the formation of the mineral mullite within the body at these high temperatures. Porcelain and other ceramic materials have many applications in engineering, especially ceramic engineering. Porcelain is an excellent insulator for use at high voltage, especially in outdoor applications, see Insulator (electricity)#Material. Examples include: terminals for high voltage cables, bushings of power transformers, insulation of high frequency antennas and many other components. Both the Light switch and Door knob were used in Box Cottage during the late 19thC and early 20thC by the Box and Rietman families. William and Elizabeth Box purchased the land with Cottage in 1868 and raised their familya) An electric light switch that would be attached to a wall. An Ivory Porcelain Base Single Light Switch with antique Brass top b) A porcelain door knob Both items used in Box Cottage early 20th Ca) On base BRITISH MADE / ENGLAND / 4 / 6959 lights, porcelain, electricity, early settlers, moorabbin, cheltenham, bentleigh, box william, box elizabeth, rietman august, rietman frieda, market gardeners, flower gardens, seedling nurseries, world war 1 1914-18, war memorials, sculpture, pottery, pressed concrete, door handles, door knobs

This field telephone was developed primary for military purposes (World War I) and other wars/military interventions there after. It was the first "mobile" telephone which had a prime objective of providing isolated or "hard" to connect with locations instant communication links. Like a lot of "new" technologies it evolved from a war environment. This handset was used to connect offices and workshops, which due to their functions could not be co-located with their prime office(external workshops).The evolution from the early 1900s to the mid 1980s when mobile communication technology progressed in leaps and bounds from hard wire telephone communication to mobile digital receivers. This handset was manufactured by a subcontracted Australian company under the Australian Post Office mandate.This handset is significant in that it was donated by the Mount Beauty Timber yards and formed an integrated part of its communication system with its out lying work yards and buildings, before the mobile handset evolution. This handset was located in an environment which required a rugged and reliable day to day communications linkage as a vital part of its logistical (business) survival. As progress demands it, the faster that customers are satisfied with the service they obtain from suppliers the longer those services will be asked for and the longer and more profitable the supplier will be. This edict is as true for rural companies as it is for small or large city businesses. The customer is "always" right.This sturdy field telephone has a shell housing made in black bakelite material with a "U" form housing the major components (wiring, magneto and batteries). The main housing has two metal bells, with a central ringer between both, on the top part (to notify incoming calls). In front of the main structure is a box with the telephone hand piece (ear and mouth receptacles) nestled on two cradles. An on/off switch is activated when handset is removed from its cradle. On the front of the control box is a winder handle(to ring off) and in a field situation to activate/deactivate the magneto. To the left of the winder but on the the main body are two wind up connection buttons for the connection of operational wires (power)On the main right hand front body and next to two chrome switches is a plate with "L (next to the top switch) and below this "L2" and underneath this are "or" "EARTH". There is a plate fastened to the front of the handset and behind the winder with "REPLACE HANDSET WHEN FINISHED" and below the winder 'SERIAL NUMBER 5116"field telephone, world war ii field telephone f mk i

Used as display in AMSA workshop foyer, Moorabbin, Vic. Nautical charts x 2 , The framed and glazed chart identifies strategic points in the notorious Bass Strait passage, which in the nineteenth century was known as the ‘Eye of the Needle’. It covers the whole of Tasmania, Bass Strait and the islands, and the lower part of Victoria with its coastline between Cape Otway and Gabo Island. The chart has an electric cord connecting it to a wall switch which enables a series of small lights to flash on strategic geographical locations.. While it is not known if it is original to Wilsons Promontory, it certainly elates to its location. A similar chart at Cape Otway shows less of Tasmania and is not electrified. Gabo Island Lightstation has two large framed charts; one is the same as the Wilsons Promontory example but without the lights and the other is entirely different, focussing on the east coast between Point Hicks and Montague Island. The Wilsons Promontory chart is unique as an illuminated version of the other charts and has first level significance if its provenance to the lightstation can be confirmed.The framed and glazed chart has an electric cord connecting it to a wall switch which enables a series of small lights to flash on strategic geographical locations.Yes

Shell - brown on base with light switchweapons, ballarat rsl, ballarat

Approx circa 1980s Microphone with in line push to talk switch Philips Microphone

A machine fitted with sharp blades, for mashing, crushing or liquefying food ingredients. i.e vitamizing. The jug, made of glass, steel, aluminium or plastic, contains rotor blades that engage with a bit protruding from the base containing an electric motor. When activated by the switch on the base the sharp rotor blades chop, mix , mince, pulverize the ingredients in the jug . The degree of mince depends on the time the motor is running. The jug is easily removed from the base to pour the mixed ingredients where needed and the rotors are safely and easily cleaned by rinsing under water.c1940, an electric, 'Vulcan' Vitamizer, with the original cloth covered flex and bake-lite lever switch at front of the cream bake-lite base . The jug- shaped chrome blender has a red, thick, rubber lid. Front: : Vulcan / LM1 Base ; VULCAN / TYPE LM1 / Patent Pending Design / Volts 220 Amps 8vitamizer, food preparation, cooking, vulcan pty ltd australia, moorabbin, bentleigh, cheltenham, ormond, housekeeping

Construction of Entrance and Switch Back Railway, Luna Park, St Kilda, October 1912; onion dome on one side, not the other; two early motor vehicles with spoke wheels; construction crew on top level; sign 'Contractors The G.A. Lawsha Contruction Co. London, Engineer T.h. Eslick'black and white photograph, mounted, poor conditionLuna Park 5/1/0/12 Switch back Railway [trikethrough text 'afterwards called Big Dipper']; [stamp] George Wall & Co, Photo Experts, 131 Chapel St., Balaclava (near Melbourne) Photoas copied, resuscitated and enlarged.