Used in Physics Laboratory at Ballarat School of Mines for calculating/confirming relative density (or the specific gravity) of given metal samples. This would have been in Elementary physics experiments.A set of seven 2-cm cubes, individually numbered 1 - 7, in a hinged-lid storage box with black surface finish.Number and metal of cubes: 1) Brass; 2) Lead; 3) Steel; 4) Copper; 5) Aluminium; 6) ? a ferrous alloy; 7) ? a ferrous alloy.physics, laboratory, ballarat school of mines, relative density, specific gravity, metal, elementary physics, brass, lead, steel, copper, aluminium, ferrous alloy

In 1938 William Edward Mc Pherson established Australian Abrasives Pty. Ltd., manufacturing grinding and filing tools, blades and other similar hardware items. This sharpening stone is made of silicon carbide, which is a very hard synthetic product. The compound was discovered in America in 1981 by Edward Achison whilst trying to make artificial diamonds from a mixture of clay and powdered coke. Initially the substance was used for polishing gems then it went on to be used as an abrasive in sandpapers, grinding and sharpening stones and cutting tools. This sharpening stone was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Sharpening stone, part of the W.R. Angus Collection. Grey, rectangular block of silicon carbide made from two pieces of different densities joined together. Sharpening stone is in green and black cardboard box with lid. Maker is Australian Abrasives Pty Ltd. Circa mid 1900’s.Box text "AUSTRALIAN ABRASIVES Pty Ltd SHARPENING STONE" and "SILICON CARBIDE" and "NO. 108 / COMB", "8" x 2" x 1" "flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, sharpening stone, australian abrasives pty ltd, sharpening tool, metal working equipment

Speech addresses urban planning, points to Canada and New Zealand as possible exemplars, prophetic predictions for the future (2017) like Archigram and the 'electronic era of the anti-city'; Boyd advocates strongly for high density.Speech for the Australian Planning Institute Jubilee ConferenceTypewritten, quarto, 25 pagesExtra handwritten notessydney, monorails, town planning, australia square, perth, melbourne, bernard evans, canada, new zealand, toronto, montreal, expo 67, archigram, los angeles, robin boyd, manuscript

Model tram - made from a high density plastic, of the Melbourne City Circle tram, representative of the tram itself, not dimensionally accurate, no pantograph, only one route number box, painted in the burgundy red colour scheme and numbered 957. No indication of manufacturer. See item 6574 for a green versiontrams, tramways, models, city circle, tram 957

Multiload is an IUD, an intrauterine device used for contraception. The plastic used in this IUD is a mixture of high density polyethylene, ethylene vinyl acetate copolymer and barium sulphate in a weight ratio 44/36/20. (MIMS, October 2013)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two flat boxes containing Multiload CU250 intrauterine devices. Front of each box carries an image of a hand holding an IUD inserter, with the Multiload IUD at the top of the inserter, above a blue background on which an image of a vagina has been superimposed. Text printed on the front of the box reads 'MULTILOAD/CU250/intra-uterine/device/Attention:/the enclosed instructions should be followed carefully before insertion of the MULTILOAD-cu250'. Manufacturer's information is printed on the bottom section of the front of the box. Back of each box is printed with distributor information. One box is sealed, and one box is unsealed. Unsealed box contains one IUD, sealed inside a sterile plastic pocket. Back of sterile pocket is printed with an expiration date of 06-12-1984. The IUD is in the form of a small plastic rod, or stem, with two small flexible side-arms. Each side arm has five small protrusions. A copper wire is wound around the stem. A nylon thread with two ends is attached to the bottom end of the stem. Back of sealed box carries a sticker which reads 'Date of manufacture: /12-08-1984'.intrauterine device

Multiload is an IUD, an intrauterine device used for contraception. The plastic used in this IUD is a mixture of high density polyethylene, ethylene vinyl acetate copolymer and barium sulphate in a weight ratio 44/36/20. (MIMS, October 2013)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two flat boxes containing Multiload CU250 intrauterine devices. Front of box carries an image of a hand holding an IUD inserter, with the Multiload IUD at the top of the inserter, above a blue background on which an image of a uterus has been superimposed. Text printed on the front of the box reads 'MULTILOAD/CU250/intra-uterine/device/Attention:/the enclosed instructions should be followed carefully before insertion of the MULTILOAD-cu250'. Manufacturer's information is printed on the bottom section of the front of the box. Back of box is printed with distributor information. One box is sealed, and the other box has been opened. Back of sealed box carries a sticker which reads 'Date of manufacture: /12-08-1984'. Opened box contains a Multiload IUD in a sealed packet, a brochure outlining the recommended procedure for insertion, a booklet outlining prescribing information, and another booklet entitled 'Everything you have to know about Multiload'. The packaging of the IUD inside the opened box is labelled with an expiry date of 16/10/1984.intrauterine device

) fox: hand crocheted cotton, lamb�s wool synthetic yarns and reflective tape over high density foam, papier mache, wire, mirrored acrylic, cotton fabric and synthetic fabrics, synthetic polymer emulsion and glass beads; 2 5) various fibres; 6) base: enamel gloss paint on fibreglass

Pure wool, navy blue men’s cardigan. Five navy blue buttons. One bound pocket on each side front. A 10.5cm wide band of woven pattern on each side front. Fine knit of heavy density. Set in sleeves with a 2cms wide fine knit cuff. Machine stitched button holes. Overlocked seams.Sutex ® Quality Knitwear. Made in Australia. Size 18 to fit 100cm. PURE WOOLcostume, male, cardigan

Illustration of cable trams in Melbourne (Collins St. and Elizabeth St.[location confirmed by WD 07112023]) - trailer lettered "St. Georges Fitzroy Rd. North), with Green bands top and bottom, textured bands and two lines of a Poem from Kendall on rear. Image re-scanned at high density 14-9-2013 and record checked.trams, tramways, melbourne, collins st., cable trams, fitzroy

This Sike’s Hydrometer was donated by the Port Fairy Customs Office as it was no longer required by them due to a change in the law. The hydrometer was part of a system for Ullaging or calculating the amount of liquid remaining in a container of liquor such as a barrel, and the amount of alcoholic content in the contents. It can also measure the free space or head space remaining. Hydrometers were used to measure the density, or relative density, of liquids from the late 1600s. In 1816 Bartholomew Sikes won the competition for the most useful accurate hydrometer. Hydrometers were commonly used by distillers, vintners, and brewers to establish accurate measures of alcohol concentration in their beverages. Following this manufacturing process, government inspectors and excise officers used them to check that the labelled indications of alcohol-proof were correct and that the right amounts of duty were being paid.The Sikes hydrometer is of local significance because of its association with the Government's Customs Office in Port Fairy, in the southwest region of Victoria. It is also associated with Bartholomew Sikes, whose design of a hydrometer was chosen in 1816 as being the most useful and accurate hydrometer. The hydrometer has evolved into the digital version available today to measure density of liquids.Sikes Hydrometer and thermometer in a fitted wooden case with crimson lining inside the lid and dark lining in the base. The case has ten vertical pegs to secure the weights. The brass hydrometer has a spherical float and eight thick brass horseshoe-shaped weights. The serial number is on each section of the float and all weights. Both sides of the float’s upper flat stem have a scale from 0-10, with five divisions between each number. The eight weights are numbered from 20 – 90 in increments of 10. The set includes a mercury thermometer mounted on an ivory back plate labelled with Fahrenheit and Centigrade Scales. The Sikes hydrometer set was made by Loftus of London. The hydrometer model is IID 510, Serial Number is 14674, calibrated by Longs, London. All parts of the float and eight weights are inscribed with Serial Number “14674” The float stem is stamped "SIKE'S IID 51o” Calibrator, "LONG LITTLE TOWER ST LONDON" The weights are numbered individually ”20”, “30”, “40”, “50”, “60”, “70”, “80” or “90” Each weight in inscribed; symbol “(J L) [inside an ova, with textured background]” The thermometer inscribed: “LOFTUS OF LONDON”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, measuring instruments, customs tax, weighing instrument, sike’s hydrometer, calibrator long of london, loftus of london instrument maker, loftus, j long, sikes hydrometer, scientific instrument, pressure measurement, measuring instrument, ullage tool, customs, excise duty, tax, alcohol content, proof, calibrate, standard weights and measures, tariff, scientific instrument makers, specific gravity, liquid density, alcohol testing, technology, alcohol measurement, proof spirit, wine and spirits merchants, local business, brass measuring instrument, port fairy, customs office, port fairy customs, joseph long, instrument maker

Yields information about the arrangements for the visit of the TRB to Ballarat and Bendigo., Yields information about the arrangements for the visit of the TRB to Ballarat and Bendigo.Memorandum and letter to or from the Engineer & Manager from the Ballarat Manager - all with rounded corners. .1 - Memorandum - responding to the letter of 9/3/1962 re dates of a visit by the Transport Regulation Board .2 - Letter from Head Office, dated 9/3/1962, re visit of TRB to both Ballarat and Bendigo regarding traffic density and characteristics. TRB Officers Jacobs and Smith. trams, tramways, reports, passengers, transport regulation board, interviews

Yields information about the ESCo electric trams and the streetscape the Grenville St era and demonstrates how items were "photoshopped" or manipulated into the photo to make the street look busy.Photo montage of ESCo tram No 16, before windscreens (No 16) at Grenville St looking towards Town Hall. Four motor cars, and pedestrians have been added to the original photo to make the street "Look busy". On the reverse is a photo cropped at the top of Eureka Monument. The photo has buildings on the south side of Sturt St. in the view. Image re-scanned at high density 14-9-2013 and record checked. Two copies held.trams, tramways, sturt st, grenville st, ballarat trams, esco

Vietnam era issue flying helmet type HGU-2A/P. The helmet is manufactured from fibreglass in a jungle green finish and has a thick high density plastic foam lining for head protection. Complete with an adjustable chin strap and a dual visor kit of clear and tinted visors to protect the eyes. This helmet is fitted with two loudspeaker/earphones and a microphone positioned in front of the mouth of the wearer. The microphone has a flying lead with an audio connector for connection to the aircraft communications equipment.

Manuscript? - 8 sheet carbon copies (poor) on foolscap sheet, untitled document outlining the tramway history of Melbourne from the time of the formation of the Melbourne Omnibus Co., through the cable tram era, NMETL, PMTT, formation of the MMTB. Preston Workshops, tramcars, Melbourne compared to other cities, in particular the lower population density, conversion of cable cars, use of buses, financial and community services - Fire Brigade etc and concession fares. Noted dated - c1930. Two copies heldtrams, tramways, mmtb, workshops, cable trams, buses, bus services, concession fares, melbourne omnibus co.

This teal coloured bottle (blue-green, non-olive) has been handmade from about the 1840s-1870s. The bottle, possibly used to store soda or mineral water, was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. The teal, or blue-green, colour of this bottle’s glass is reasonably rare. The colour is probably the result of a combination of cobalt (blue), iron (yellow-orange) and chromium (green) that may have been in the raw silica, or perhaps added to the glass sand before making the glass. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A ponty tool was used to complete the shape of the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle, sometimes using a tool to do this. The seal was usually a cork, often held in place with wax or wire with tape over it to seal the aerated drink inside. The gutter between the upper and lower lip was used to anchor the seal. This style of handmade bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the neck and body from it being blown, and a mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of handmade, mid-19th century bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is significant for its rarity, as its teal, blue-green colour is unusual. It is a valuable addition to our collection of 1800s handmade bottles. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; unusual dark teal (blue-green, non-olive) opaque glass, medium size, cork-top style. Handmade with applied double-collar lip with straight side upper and a ring lower. The edge of the mouth is uneven. Neck is slightly bulbous. Body has shoulder seam, then tapers inwards to base, shallow base. Heel is uneven width. Base is shallow with glass of different density. Bubbles in the body and an elongated bubble at base of neck. Sediment inside bottle. Chip in lip. Scratched surface.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, 19th century bottle, collectable, bottle, green glass, blue-green glass, teal glass, non-olive green glass, dip mould, soda bottle

'Close Knit' was conceived based around providing the high density accommodation of the area with what many residents will never experience; the iconic ‘Aussie’ backyard, symbolised by washing on a Hills Hoist. This concept was transposed into several elements, including two large flying jumper sculptures. These stainless steel and fibreglass structures are supported on slanted poles, reminiscent of Hills Hoist arms. The jumpers appear to catch the breeze, and billow up, like washing on the clothesline on a sunny day, and cast lovely shadows across the paths and gardens. They are bright and joyful reminders of simple homespun joys. The handcraft theme is also featured in knitted concrete garden walls throughout the gardens. As if the wind is captured in the movement of the Hellenistic drapery, these panels echo the Lady of Justice, an earlier work of mine on the Victorian County Court. These feature walls bring a softness to the park and hark back to classic European garden design. There are 6 finial/balls of wool marking gateways and entrances to the park, as well as a couple randomly scattered throughout to be discovered. There is also a draped plinth at the Peel street entrance which has my signature. Again these elements echo traditional garden design and are a tactile and recognizable link to the hand knit themes of the park. Given the strong themes of domesticity and handcrafts, I have titled my work ‘Close Knit’, as it applies to the purpose of this public space as well as the works scattered throughout. Yarra City Council delivered Cambridge Street Reserve in partnership with the Victorian Government, who have supported the project with $1.3m funding. Yarra City Council has invested a further $731,130 towards the project. Urban Imitative Landscape Design worked with artist William Eicholtz at the beginning of the design process to consider the needs of a growing high-density population of the area. At double the size, with extensive park seating and a large lawn space which is shaded by native trees, Cambridge Street Reserve is now the largest park in Collingwood. 'Close Knit' by William EicholtzTwo knitted fibreglass 'jumpers' over stainless steel framework; six concrete balls of wool throughout the park; 25 metres of cast (drapery) concrete walls; concrete plinth at Peel street entry which is draped with a concrete knit and a ball of wool on top as finial; reverse rope reliefs on the front façade of eastern stairs. Artist name and date 'William Eicholtz 2023' inscribed on plinth with ball of wool on top as finial. handcrafts, domesticity, aussie icons, european garden design, public space, high density accomodation

Set of letters and memos regarding road damage by buses in West Geelong and a report and notes regarding Geelong Tramways. Includes Early history of Geelong, Creation of the SEC, acquisition by the SEC, agreements with Councils, proposed extensions, physical characteristics of Geelong, the Outlook for Geelong, attempts to define transport future, review of operations, with reference to financial statement, tramcars, fare schedules, employees, trams used, services supplied, passenger density, outlook, costs, possible improvements, and conclusions. Includes tables for income and expenses from 1935 to 1953, and statistics for operations.Demonstrates an extensive appraisal of the Geelong tram system in 1953.Document - 20 foolscap sheets with rounded corners and 1 quarto sheet - typed. held by a brass folding clip in the top left hand corner.tramways, tramcars, operations, secv, geelong, history

Photograph of Fitzroy, Northcote & Preston Tramways Trust (FNPTT) R class tramcar No.1 northbound on single track in Plenty Road, Preston approaching a double track loop south of Bell Street. The photograph looks southward showing an unsealed road surface with a few horse drawn carts, span poles and overhead wires, tramways overhead light above loop turnout and low density shop fronts. While this tramcar and track were constructed for the FNPTT, the line was only operated by the Melbourne and Metropolitan Tramways Board from 1920. This car would soon be renumbered 151 and relocated to other lines Melbourne.Yields information about commencement of the Preston tram line and the Fitzroy, Northcote & Preston Tramways Trust. Black and white photograph with nothing on rearfnptt, r class, plenty road, preston, span poles, track loop, melbourne and metropolitan tramways board, fnptt number 1, tram number 151

Discusses future cities and speculates on future trends. Looks back at ideas on the future of housing held by Boyd and his contemporaries in the 1950s and discusses how the reality of housing in the 1970s differs.Typewritten, quarto, 9 pagesfuture cities, apartments, suburban sprawl, modern houses, australian families, prefabrication, density, tensile construction, habitat 67, caravans, fred hoyle, tange, habitat 67, moomba, robin boyd, manuscript

Yields information about the passenger traffic in Ballarat during Feb. 1962, Yields information about the passenger traffic in Ballarat during Feb. 1962Memorandum and Report to the Engineer & Manager from the Ballarat Manager - all with rounded corners. .1 - Memorandum dated 16/3/1962 forwarded detailed traffic figures referred to in a letter of 5/3/1962 .2 - detailed analysis of average passengers per trip including scholars for each route by hour - was dated Feb. 1962, but has been crossed out. .3 - Passenger density and direction per hour for each route - Saturday - was dated Feb. 1962 - but has been crossed out and August 1963 written in. .4 - as for .3 - for Sundays. See Reg Item 7931 for similar reports and 8030 for another version.trams, tramways, reports, passengers, ballarat

Set two SEC memos that were clipped together with item 9824. 1 - titled "Tramways - Extensions" from the Engineer Manager of Electricity supply department (Melbourne) to the Ballarat manager, dated 7-10-1953 - asking for survey information about housing numbers along each route and the possibility of extending the Victoria St and Mt Pleasant routes. 2 - titled "Tramways -Public Passenger transport" - from the Engineer Manager of Electricity supply department (Melbourne) to the Ballarat manager, dated 12-10-1953 - regarding the recent inquiry in Geelong and that data regarding passenger density per hour and passengers per route would be desirable. See item 9806 for this type of materials. Demonstrates SEC Head office correspondence with the Ballarat Branch office re tramways.Set of two typed memos on SECV letterhead.tramways, trams, ballarat, new tramways, passenger services, statistics, enquiry

Print Council of Australia Members' Print Commission, 1977.Screenprint and embossed print. Screenprinted image is in upper 1/2 of print. Two rectangular prints in gold and mauve in abstract pattern. Overlaying these is a royal blue dotted print, framing top and sides of gold and mauve print. Over centres of gold and mauve prints are rectangles of royal blue dots, giving appearance of Benday dots, or mesh screen. The density of this mesh fades gradually from top to bottom. The bottom edge of the screenprints are undulating, meeting the upper edge of the embossing that occupies remaining lower area of the print. The embossing is the same pattern as in the mauve and gold screenprint above. Mounted in pale cream matt. In black painted wodden frame, with glass.Front: A. P. VIII/X (lower left) Ewins 77 (lower right) (pencil) Back: 1978 (upper left, pencil)

Baby brush and comb sets were often given as Christening presents. The pure bristles were especially soft for use on infant's hair. Children's hair is often a problem because it is supremely fine and may be difficult to care for because of its nearly downy softness and fluffiness. Up until the age of 7-10, this fine hair will remain about the head. Children’s hair is different from adult hair in texture, density, and likely also colour, body and so on. Hair's traits change over time as humans physically develop, and even age. Like the rest of the human body, (example, teeth), hair has different stages of development spanning the full lifetime from birth to death. Source: www.wikipedia.org Infants' brush made of cream bakelite and pure bristle. Comb made of cream bakelite . Inscription in silver "Baby".Written in silver script, the word "Baby". Indentations on comb.child, and, nursery, bakelite, infant, grooming, brush, comb, pure, bristles, soft, mother, toiletries

Colour print from a scanned image of a blueprint drawing, BEO 41/10 titled "Bendigo Electric Tramways / Existing Fares and New Proposals / July 1935". Has date of 18/7/1935, shows a map of the Bendigo system, with current fares to various points, and two proposal A - shown in yellow (cash and ticket) and B shown in red. Gives various locations on the tramways. Scanned image prepared by joining six portions into one using photoshop by W. Doubleday. Image made 9/3/2005. Image 1 is of the blue print itself - forwarded to Bendigo Tramway Image 2 is a jpg of colour scanned image. high density image on the special image files directory.bendigo, fares, tickets

Robin Boyd was involved in creating several TV series for the ABC University of the Air. 'Design in Australia' was an eight part series. (Items D184-D193 contain all the manuscripts except part six titled 'Communications'.) In Part 7, Boyd begins by discussing the difference in cities, including age, population density and colours across Australia, Europe and America. Boyd discusses individual streets compared to the whole city and how the two are ultimately different and unique. He remarks that in Australia, the word 'city' is used to mean the whole 'complex' of city and suburbs, "a pattern reflecting free personal spending and yet a tight public purse". Boyd references Canberra as the Australian domestic dream come true. "Canberra is genuine Australian". He notes that the making of cities is not just a question of money. It's a question of priorities.This is a draft script for the ABC television program 'University of the Air', subtitled 'Design in Australia', broadcast in 1965.Typewritten (c copy), foolscap, 13 pagesuniversity of the air, design in australia, robin boyd, town planning, zoning, canberra, brasilia, punjab, cities, suburbs, manuscript

This Sikes brass hydrometer was manufactured by the optical and scientific instrument makers Kasner & Moss of 17 Collins Street West, Melbourne, in the latter part of the nineteenth century. The firm adverted hydrometers, as well as optical instruments, as early as August 13th, 1864, in The Age, Melbourne. This hydrometer set was donated to Flagstaff Hill in 1979 by local wine and spirits merchants Lynch Bros of Fairy Street, Warrnambool. Giffen Russell had established the business in 1878, and Harry Lynch took it over in the 1930s, and after he passed away in 1953 Kevin Matthew Lynch became proprietor of K M Lynch Food and Liquor. The business closed in the 2010s. The hydrometer may date back to the establishment of the business in 1878, as Kasner & Moss were selling hydrometers in Melbourne from 1864. Hydrometers were used to measure the density, or relative density, of liquids from the late 1600s. In 1816 Bartholomew Sikes won the competition for the most useful accurate hydrometer. Hydrometers were commonly used by distillers, vintners, and brewers to establish accurate measures of alcohol concentration in their beverages. Following this manufacturing process, government inspectors and excise officers used them to check that the labelled indications of alcohol-proof were correct and that the right amounts of duty were being paid. This hydrometer and its fitted and hinged wooden container show signs of heavy and protracted use in a working environment. Although the instrument has some parts missing and has been recently repaired, the original quality of the inlaid box and the fine engraving on the instrument and the attachable weights, are indications of the hydrometer’s very real value when new. This Sikes hydrometer, bearing the maker's mark of “Kasner & Moss Melbourne” and the registered number “20373”, was presented to the purchasing public as a precision-made instrument designed for professional use. The Sikes hydrometer is of local significance because of its implied association with the alcohol trade in the southwest region of Victoria. It was donated by a family member of Lynch Bros, a local licensed outlet for wines and spirits in the period before the general relaxation of liquor licensing laws in the State of Victoria. It may have belonged to Griffin Russell who established the liquor store in 1878.Hydrometer; original Sikes brass hydrometer in a polished wooden case with an inlaid plaque on the lid. The brass float is a sphere with a thin flat upper stem and a short, lower stem with a bulb-shaped end. The upper stem is engraved scale on both sides with the numbers 1 to 10, and five divisions between each number. There are ten fixed pegs in the base to secure the thick brass horseshoe-shaped, numbered, various-sized weights (20, 30, 40, 80, 90); the free pegs would have originally stored another five weights (10, 50, 60, 70, and 100). The empty compartment in the box suggests another part in the initial set, probably a thermometer. The fitted, fabric-lined box has two brass closures and two brass hinges. The scientific instrument shows signs of heavy use and repairs. The Serial Number on the float matches the Serial Numbers on the weights. The plaque on the lid, the float and the weights have inscriptions. Made by Kasner & Moss, Melbourne. Plaque: “SIKES HYDROMETER / KASNER & MOSS / MELBOURNE” On float's lower stem: “SIKES 20373” On one thin edge of the float's scale, engraved in script “Kasner & Moss” and stamped “MELBOURNE”, and symbol“P” rotated 90 degrees. On the opposite thin edge of the float: “N20.373”, “SIKES”, “I P % II O” (in ornate capitals). Each weight has s unique number, and the same serial number “20373”.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, sikes hydrometer, scientific instrument, pressure measurement, measuring instrument, ullage tool, customs, excise duty, tax, alcohol content, proof, calibrate, standard weights and measures, tariff, kasner & moss, scientific instrument makers, specific gravity, liquid density, alcohol testing, technology, alcohol measurement, proof spirit, wine and spirits merchants, local business, brass measuring instrument, k m lynch, giffen russell, harry lynch

This clear, green tinged, Half Whirley (or Whirly) salad oil bottle has been handmade by a glassblower from 1870s-1910s. A bottle with such elaborate decoration would have been sought after as there was no need to decant the sauce into another jug or bottle to make it acceptable for table service. It is possible that this bottle was recovered from the Loch Ard, wrecked in 1878. A diver found the bottle on a shipwreck in the coastal waters of Victoria about 100 years from when it was made. The diver who found this bottle has recovered objects from several different shipwrecks between the late 1950s and early 1970s. A sizeable proportion of those objects was from the wreck of the famous clipper ship Loch Ard. This salad oil bottle may very well have been amongst that ship’s cargo. It is part of the John Chance Collection. A paper titled ‘Glass Bottles from the Loch Ard Shipwreck (1878): A Preliminary Study’ by Iain Stuart, (published in Australian Historical Archaeology, 9, 1991) included a study of twelve salad oil bottles from the wreck of the Loch Ard. The bottles were of this same Half Whirley design (half meaning that it was Whirley on the upper half but not on the lower half of the body), as well as the same colour and size. A diagram of one of these twelve bottles matches the bottle in our collection. The paper mentions that eleven of the twelve bottles have a number on their base, just as this one has. It is estimated that foreign and salad oil bottles totalled four percent of all of the bottles carried as cargo on the ship. The Half Whirley bottle has side seams from below the lip to the base, indicating that the bottle was made in a two-piece mould that included the heel, body, shoulder and neck. The fancy ‘whirly’ twist pattern and panelled sides would have been cut into the mould’s inner surface. The uneven thickness of the ridge around the base comes from adding a separately moulded and embossed base after the bottle was removed from the mould. The applied finish (mouth and lip) was also added to the bottle. The elongated bubbles in the glass are evidence of the glass being mouth blown into the mould, thus forming the shape and pattern from the inside shape of the mould. The bottle probably had a glass stopper with a round top and wedge-shaped shank with a ground surface, allowing the bottle to be re-sealed. The ring between upper and lower lip allows the closure to be sealed and anchored. The embossed numbers are either “133” or “833” and may represent a particular bottle pattern, manufacturer or filler. Although the bottle is not currently linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 19th century. This whirley salad oil bottle is matches the whirley salad oil bottles recovered from the Loch Ard in the 1990s, adding depth of interpretation to the array of salvaged Loch Ard artefacts in Flagstaff Hill’s collection. The salad oil bottle is an example of the type of food condiment containers that were used in Victoria’s early days. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks, including the Loch Ard, have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; glass Half Whirley salad oil bottle, green-tinged, with some opalescence. Handmade, elaborately decorated bottle with round neck and base, and five-sided body. Applied double lip; straight upper, flared lower. The lower neck and shoulder have twisted spiral whirley patterns in the glass. The body tapers slightly inwards towards the base. It has five plain panels, one wider than the others. Side seams run from below the lip to the heel. The heel of the bottle is uneven in width, height and density where it joins the body of the bottle. The base is not level. Embossed characters on base. Glass has elongated bubbles towards the base and orange-brown sediment inside, on one side. Embossed "133" or “833” (the first character may be an “8”) flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, 19th century bottle, collectable, bottle, green glass, tinged green, two piece mould, food bottle, oil bottle, salad oil bottle, whirley, whirly, half whirley, condiment bottle