Showing 434 items
matching electronic
-
Melbourne Tram Museum
Decorative Object - Clock, William Carrol, "The Melbourne Tram Block Hand made in Australia", c2010
Electronic or battery clock mounted in a former Melbourne cable tram era wood block, cut from an former Melbourne tramway paving red gum block with one of the faces polished up The clock is inset into the wooden block, plastic, Perspex front. The clock made by "SHONTEK" Small N size battery - battery has been removed from the item. The block has a label on the underside - "Hand crafted in Australia by William Carroll", Arraign, Victoria, Phone 03 5622 3644. Inside the box are the instructions for the clock and a business card size sheet with a photo of the wood blocking of St Kilda Junction and some historical notes - see images.trams, tramways, yarra trams -
Bendigo Military Museum
Instrument - BUGLE, C. 1940
The Bugle was played by the British over 2000 times to warn of impending air raids in the Middle East. When a new electronic siren was installed Bill Nicholls souvenired it and carried it in his haversack until he reached home. William Bona Nicholls No VX36468 2/24 Batt 9th Div. enlisted on 12.8.40, embarked 16.11.1940 for the Middle East, promoted L/Cpl 8.5.1941, served in the Seige of Tobruk, El Alamein and Middle East Campaigns. He was taken POW at Derna and escaped after 8 hours. Embarked for Australia 1.2.1943 and disembarked Melbourne 25.2.1943. Embarked for New Guinea 1.8.1943, hospital 5.12.1943 with Degue Fever, rejoin unit 9.12.1943, served in the Lae and Finschafen campaigns. Promoted Sgt 11.2.1944, embark for Australia from Finschafen 28.2.1944 and disembark Brisbane 7.3.1944. Evacuated to hospital 16.3.1945, appears to be Anxiety State. Discharged from the Army 3.9.1945 with the rank of S/Sgt.Copper & brass army bugle with nozzle & holding chain.Main section of bugle has: a lettered crest, & Besson & Co, London, 1940musical instruments - wind, military history, bugle, tobruk -
Parks Victoria - Cape Nelson Lightstation
Instrument - Morse Code Key Set
The battery powered set, which dates from the second half of the twentieth century, comprises two main components, the electronic keyer with a single lever for tapping, and a transmitter (?), both connected by a keying cable. Morse code was invented in the 1830s by American, Samuel Finely Breese by using electrical signals to quickly transmit information over a long range. In the early 1890s Italian inventor, Guglielmo Marconi improved the technology to the point where it became an essential device used for commercial and government purposes. The first practical applications were demonstrated with maritime messaging, where this simple mode of communication was seen as a timely replacement for the historic practice of signaling by flags, lights and foghorns. Cape Schanck has an earlier Morse code key, which is original to the lightstation (CSLS 0035), and Cape Otway has another early example although its provenance to the lightstation has not been formally verified (COLS 0074). The Morse code set has first level contributory significance for its historical value as an earlier communications device that has since been made redundant by more sophisticated technologies.Morse code key set. Comprised of the tapping component and a metal box part with a white electrical cord.Yes -
Kew Historical Society Inc
Archive (Sub-series) - Subject File, Boroondara General (Kew) Cemetery - File 1, 1960
Various partiesReference, Research, InformationKHS OrderSubject file containing numerous newspaper articles/clippings, items of correspondence, unpublished research, pamphlets, a CD-ROM, notices of exhibitions and walks etc. The earliest manuscript is handwritten notes entitled ‘A Place in the Shade’, compiled in 1960, by members of the Kew Historical Society. Some of the topics covered in the file include the Rotunda restoration project, the Cemetery’s 150th anniversary, Von Mueller, the Peace Haven Mausoleum, etc. The file also includes a single copy of ‘Boroondara: A Place in the Shade’ published by the Kew Historical Society and the Trustees of the Boroondara general Cemetery in 1980. There is also a CD-ROM that is called the ‘Kew Cemetery Tree Report’ but probably contains an electronic copy of the Conservation Management Plan. boroondara general (kew) cemeteryboroondara general (kew) cemetery -
Westbourne Grammar Heritage Collection
Instrument - Miss Molland's School Bell
This bell was used to begin and end recess and lunch breaks at Strathmore Williamstown Grammar School. It was introduced by Mabel Martha Molland, Principal (1914 - 1963) and was in use at the Williamstown campus until the installation of an electronic bell system in the early 2010s. It is known at the school as 'Miss Molland's Bell' and was featured in The Old School Tie exhibition at the Old Treasury Museum in 1999. The exhibition label for the bell read, 'This bell has been used to summon students to class for as long as anyone can remember, although it is reported that in Mr. Gerity's time (1897-1914) classes were "signalled by Gerity appearing at the door and waving an enormous white handkerchief the size of a bed sheet" (Reported in Johnson, J. 1987, The Westbourne and Williamstown Grammar Schools, pg. 37)'. The bell has historic significance as it originated with Mabel Molland, Principal (1914 - 1963), a very prominent figure in the history of the school and has been handled and used by countless students, assigned the coveted task of ringing the bell, over many years.Brass bell with a turned wood handle. The are five parallel grooves near the top of the handle and two near the middle. The bell has two parallel grooves around the fluted sound rim. The clapper is attached, with a twisted piece of 1mm diameter single strand wire, to a d-ring inside the head of the bell. mabel molland, strathmore grammar, school bell -
Wodonga & District Historical Society Inc
Functional object - Adding Machine - J. Mann & Sons, Bell Punch Co. Ltd, 1950s
J. Mann and Sons was first established as a farm produce store in 1921. The range of products was extended in the 1930s and included groceries and hardware, as well as the first petrol bowser in Wodonga outside the store. After WWII, the premises were extended and the range of products continued to increase. In the 1960s the Mann Family opened a new supermarket in Wodonga, in addition to the hardware business, providing steel, plumbing and industrial supplies, and they employed over 100 people at one stage. With changes in the retail industry, the Mann Family sold the main hardware business to Bunnings and the produce business to the Kelly brothers in 2006. Bell Punch A/sia Ltd was a subsidiary of The Bell Punch Company, itself a part of (Cash) Control Systems. The Bell Punch Company was a British company manufacturing a variety of business machines, including several generations of public transport ticket machines and the world's first desktop electronic calculator The company was founded on 5 July 1878. By 1961 it employed a workforce of 2000 people. The circular mark on the back of the machine was adopted in the 1950s.On Back of machine: Supplied by BELL PUNCH LTD. A/SIA BPC CASH CONTOL SYSTEMS 160 CASTLEREAGH ST. SYDNEY, MA9337 427 LITTLE COLLINS ST. MELBOURNE. CENT. 2038 AGENTS AND SERVICE IN ALL STATES ADDING MACHINES TICKET REGISTERS CHANGE MACHINES TICKET PRINTERS GUM TAPE SEALING MACHINES, ETC.j. mann & sons, vintage adding machines, bell punch australasia -
Bendigo Historical Society Inc.
Document - BILL ASHMAN COLLECTION: BENDIGO ELECTRONIC COMPANY
Cream booklet with brown printing titled Bendigo Electronic Company of Australia Proprietary Limited. Includes Capital, number of Shares, Directors, Solicitors, Bankers Registered Office, Copy of a letter re Patents, Information about Scalebuoys, Users of Scalebuoys, What Scalebuoys Do and Where they are used, Also copies of letters from the Victorian Railways, City Overseer Bendigo, Lane's Motors Pty Ltd Melbourne, Union Oil, Soap & Candle Co. Ltd NZ, Knox Home NZ, Maungatapere Co-Op Dairy Co. Ltd., Whangarei Co-operative Dairy Company Ltd. NZ, Kettering Cartons Limited England, Pennsylvania Rubber Company USA, and the Kansas City Public Service Company USAsciences, instruments - general, scalebuoy, bill ashman collection - correspondence, bendigo electronic company of australia pty ltd, a s bloomfield, r h s abbott jnr, harry ponsonby mackenzie rn (retd), arthur robinson & co, the commercial banking company of sydney limited melbourne, a t madden, h a abbott, e c eyers, frank stevenson, city of bendigo, frank h day, lane's motors pty ltd, h c holland, national mutual chambers (n.z.) ltd, union oil soap & candle co ltd, knox home, n a duthie, w h mccorkindale, maungatapere co-op dairy co ltd, j stevenson, the whangarei co-op dairy company ltd, w h millingford, kettering cartons limited, j g arlidge, pennsylvania rubber company, paul a douden & company, w e humphrey, kansas city public service company, h w smith, j t picken & sons -
Tatura Irrigation & Wartime Camps Museum
Gramophone Record and cover
Famous Japanese singer Chimara Hsakusa, recorded as a commemorative issue for a willow tree planted in central Tokyo and thought to be 100 years old.Round black bakelite audio record. Gold coloured lettering and His Masters Voice insignia in the centre around a central hole. This record is contained in a brown and green paper cover with dark green printing in English and Japanese.VE His Masters Voice trade mark reg. Victor Orthophonic recording 52353-19 (4182) Japanese writing. Victor Talking Machine Co of Japan Ltds VE 4182. Reverse side the same except no 4275. 52353 A. Rain on Willow 4182 52353 B. Folk Song 4275 Interpreted by Hajime Kitamura. A Japanese journalist who visited the museum on 4 February 2006. Inscription on cover reads Columbia Electronically recorded. New process. Record Columbia and Japanese writing. (front and back)chimara hsakusa, victor taling machine co., hajime kitamura, rain on willow, folk song, walter hamblin -
Bendigo Historical Society Inc.
Photograph - BILL ASHMAN COLLECTION: TWO MEN OUTSIDE BUILDING WITH A SCALEBUOY
Black and white photo of two men outside a building with two piles of scale and a Scalebuoy Unit. One man standing beside the door is wearing a suit and the other man, sitting on a box, is wearing overalls and he is holding a six buoy unit. One pile of scale is pale and the other is black. Written in the photo is Shrensbury Dairy Co (N.J). Beside the black pile of scale is: Scale removed July 12-1933 and beside the pale heap is: Scale removed May 10-1933. At the bottom is: Electronic Buoys Installed Feb. 26-1933. Photo is pasted on an album page. On the back is another sepia photo of a very large scalebuoy unit which is resting on the ground. Behind it a large tank resting on two large concrete blocks.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, shrensbury dairy co (n.j) -
Wodonga & District Historical Society Inc
Functional object - Scales - J. Mann & Sons, Mercury Scale Co. Pty. Ltd, c1980
J. Mann and Sons was first established as a farm produce store in 1921. The range of products was extended in the 1930s and included groceries and hardware, as well as the first petrol bowser in Wodonga outside the store. After WWII, the premises were extended and the range of products continued to increase. In the 1960s the Mann Family opened a new supermarket in Wodonga, in addition to the hardware business, providing steel, plumbing and industrial supplies, and they employed over 100 people at one stage. With changes in the retail industry, the Mann Family sold the main hardware business to Bunnings and the produce business to the Kelly brothers in 2006. Mercury Scales was founded in Thebarton, South Australia in 1946. The business experienced rapid growth, leading to its joining with A&D’s global organisation and evolving into A&D Mercury. IN 2023 A&D Weighing is an Australian leader in the supply of electronic weighing scales, balances, metal detectors, checkweighers and weighing systems. This model was approved on 13 February 1980. On 25 March 1988 approval to change the business name to A & D Mercury Pty Ltd was granted by the Australian National Standards Commission. A set of cast iron scales. The measurement on the balance arm is in kilograms. There are 2 trays suspended by chains. bas is fitted with a level indicator and four adjustable feet.On Manufacturer's plate: MERCURY SCALE CO. PTY. LTD. SCALE MANUFACTURERS THEBARTON, S. AUST. INSTRUMENT APPROVAL NUMBERS N.S.C 6/9A/109 M/C No. Q. 760253 CAP 101 kg MODEL No. 211 Cj. mann & sons, mercury scales, wodonga businesses -
Melbourne Tram Museum
Functional object - Tramcar component, C. Brose Wuppertal Germany, Set of destination indicator equipment that was fitted to Z3 and A class trams, c1985
Set of destination indicator equipment that was fitted to Z3 and A class trams. Each item consists of various electronic parts contained within a metal case that could have been cabled together. Equipment manufactured by (Carl) C. Brose of Wuppertal Germany and maintained by Font Electronics of Melbourne - some items have the manufacturers details on them along with the details of the maintenance company and serial numbers etc. Photo .1 - shows the set of equipment as placed on display in the training room. .1 - set of two route number boxes, three individual controlled blinds, driven by a motor and control gear. Has a Fluro light fitted internally. See images .2 to .5 .2 - Small side destination indicator, with driven blind, electronic equipment with motor on the underside of the box - for use in Z class trams - see images .6 to .9 .3 - as for .2, but with motor mounted right side, used in A class trams, see images .10 to .12 .4 - set of two control panels with selection equipment for selecting the destination (by number) and route number with indicators and start button - see image .13 to 14 .5 - set of two long main rolls indicators, with control gear and Fluro light internally, driven by an internal electric motor - see images 17 and 18 .6 - set of two linking mechanism for the various boxes with large cables cut off for each of the four tram boxes. Would have been control panel item .4 - see image 15 and 16. See e-mail from Simon dated 17/11/2014. See reg Item 4617 for a small side destination roll.trams, tramways, destination indicators, a class, z3 class, transport equipment -
Eltham District Historical Society Inc
Book, Eltham Cemetery Trust, Our Eltham: Artistic Recollections, Eltham Cemetery Trust 2017, Eltham, Sep 2017
Pictorial guide to the artwork Our Eltham, a collection of 31 panels celebrating life in the Shire that were collaboratively created by artist Nerina Lascelles and ceramicist, Linda Detoma and commissioned by the Eltham Cemetery Trust. Our Eltham Artistic Recollections is a collection of panels that was commissioned by the Eltham Cemetery Trust as part of its vision to offer the community a fresh and unique relationship to the Cemetery. 31 panels were produced depicting historical images of Eltham and the nearby area with images of indigenous flowers and plants. A majority of the images were provided to the collaborating artists in digital form by Yarra Plenty Regional Library in partnership with Eltham District Historical Society who holds the significant Shire of Eltham Pioneers Photograph collection in partnership. EDHS and YPRL staff (Local and Family History Librarian) provided advice on which images to use and also provided assistance with the provision of information and editing services for this booklet, which is also available electronically. The collection of panels was collaboratively created by artist Nerica Lascelles and ceramicist Linda Detoma. The project was designed and constructed by Leigh Wykes with Australian stone and Ironwork by Neil Carter. The panels were unveiled on September 21, 2017Artworks were based on images supplied by Eltham District Historical Society in partnership with Yarra Plenty RegionalLibrarySoftcover booklet; approx 66 pages, 20 x 15 cmnerina lascelles, linda detoma, eltham cemetery, artists, art works -
Geoffrey Kaye Museum of Anaesthetic History
Painting, Bruce Fletcher, Dust Off, 1980
The painting was donated to ANZCA in 1995 by Dr Bernard Dunn. Bruce Fletcher, from Melbourne Victoria, studied under William Dargie, who had been an official war artist during the second world war. Fletcher followed the same pathway as his mentor and was the first of two official war artists appointed during the Vietnam War. His artwork are held in the art collection of the Australin War Memorial, Canberra. The title of the painting, 'Dust Off' is a term adopted in Vietnam which refers to the medical evacuation of sick or wounded soldiers, from the field, by a helicopter. It was originally a radio call sign selected from a US Navy Signal Operations book in 1963. [ref. 'Medicine at War. 1950-1972'].In June 2012, a Royal Children's Hospital Anaesthetic Registrar attended a College Tour conducted by Dr Rod Westhorpe when he saw the painting and informed us that the term 'Dust off' emanates from the Korean War and is in fact the acronym for Decisive, Unwavering, Support to our Fighting Forces'. The painting was based on a black and white photograph taken in Vietnam in 1971. An image of the photograph is located in the electronic supplementary file. Oil painting on board of a scene in which a military helicopter is about to land with a group of soldiers in the foreground, one wounded and one soldier standing. A cargo military helicopter is in the distance flying away from the scene. The painting is set in a gold frame.[plaque affixed to centre front of frame] DUST OFF \ BY BRUCE FLETCHER \ DEPICTING THE MEDICAL EVACUATION \ OF WOUNDED SOLDIERS FROM THE FIELD \ IN VIETNAM \ PRESENTED BY \ DR BERNARD L. DUNNpainting, dunn, bernard, fletcher, bruce, vietnam war, dust off -
Surrey Hills Historical Society Collection
Map, Contour map of Surrey Hills showing potential sites for the Telecom Tower
The PMG / Telecom / Telstra tower was built in 1961-1963 as a relay station to support television and radio links between city and regional broadcasting stations. The tower itself was 45 m in height with a 2 storey building for equipment and staff surrounded by garden. From the beginning it was opposed by local residents. The location is said to be the second highest site in Melbourne, sometimes described as Delaney's Hill.Two A3 photocopied sheets of a map showing part of Surrey Hills, roughly between Windsor Crescent and Belmont Street (north / south) and Standard Avenue and Balmoral Crescent (east / west). The map shows contour lines and house sites, 16 of which are numbered. One sheet has been inscribed in top RH corner with notes regarding the significance of the numbers."Contour map of potential sites / for the telecommunications tower which / was eventually sited at 2. / Jock Campbell OBE was our neighbour / at 4 Theodore St when we moved into / the area in 1984. He was responsible in his / job at the PMG in deciding on the /site of the tower - Note site 5 was / behind his (& our) house. / Jack ended his career as Deputy Director / of the PMG. He sat on international committees / after WW2 to decide the split of the electronic / spectrum for radio, TV etc. / His group developed a "mobile phone" using / fixed towers but the phone was a truck full of gear."contour map, telecom tower, maps, jock campbell, john duncan campbell -
Flagstaff Hill Maritime Museum and Village
Equipment - Scale and weights, 1860-1900
The subject item was made in England by W&T Avery a British manufacturer of weights and weighing machines. The company was founded in the early 18th century and took the name W & T Avery in 1818. The undocumented origin of the company goes back to 1730 when James Ford established the business in the town of Digbeth. On Joseph Balden, the then company’s owner’s death in 1813 William and Thomas Avery took over his scale making business and in 1818 renamed it W & T Avery. The business rapidly expanded and in 1885 they owned three factories: the Atlas Works in West Bromwich, the Mill Lane Works in Birmingham and the Moat Lane Works in Digbeth. In 1891 the business became a limited company with a board of directors and in 1894 the shares were quoted on the London Stock Exchange. In 1895 the company bought the legendary Soho Foundry in Smethwick, a former steam engine factory owned by James Watt & Co. In 1897 the move was complete and the steam engine business was gradually converted to pure manufacture of weighing machines. The turn of the century was marked by managing director William Hipkins who was determined to broaden the renown of the Avery brand and transform the business into specialist manufacture of weighing machines. By 1914 the company occupied an area of 32,000m² and had some 3000 employees. In the inter-war period, the growth continued with the addition of specialized shops for cast parts, enamel paints and weighbridge assembly and the product range diversified into counting machines, testing machines, automatic packing machines and petrol pumps. During the second world war, the company also produced various types of heavy guns. At that time the site underwent severe damage from parachute mines and incendiary bombs. Then from 1931 to 1973, the company occupied the 18th-century Middlesex Sessions House in Clerkenwell as its headquarters. Changes in weighing machine technology after World War II led to the closure of the foundry, the introduction of electronic weighing with the simultaneous gradual disappearance of purely mechanical devices. The continued expansion was partly achieved through a series of acquisitions of other companies. After almost a century of national and international expansion, the company was taken over by GEC in 1979. Keith Hodgkinson, managing director at the time, completed the turn-around from mechanical to electronic weighing with a complete overhaul of the product range of retail sales of industrial platform scales. In 1993 GEC took over the Dutch-based company Berkel and the Avery-Berkel name was introduced. In 2000 the business was in turn acquired by the US-American company Weigh-Tronix, who already owned Salter, and is today operating as Avery Weigh-Tronix.An item used by grocers and merchants throughout the then British colonies of England to weigh store-bought goods around the mid to late 19th century. This item gives an insight into the daily lives of early colonial settlers and is a significant part of the era’s social history of the time.Balance scale and weights with removable dish, two round weights glued to tray 4oz and 8oz. Scales 'to weigh up to 28lb. Printed in gold on black labels each side "W & T AVERY LTD", "BIRMINGHAM" warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, scale and weights, food preparation equipment, w t avery ltd, balance scale, grocers scales, james ford, william & thomas avery, birmingham uk -
Flagstaff Hill Maritime Museum and Village
Functional object - Standard avoirdupois weights, Avery Ltd, 1950s
A weight made in England by W&T Avery a British manufacturer of weights and weighing machines. The company was founded in the early 18th century and took the name W & T Avery in 1818. The undocumented origin of the company goes back to 1730 when James Ford established the business in the town of Digbeth. On Joseph Balden, the then company’s owner’s death in 1813 William and Thomas Avery took over his scale making business and in 1818 renamed it W & T Avery. The business rapidly expanded and in 1885 they owned three factories: the Atlas Works in West Bromwich, the Mill Lane Works in Birmingham and the Moat Lane Works in Digbeth. In 1891 the business became a limited company with a board of directors and in 1894 the shares were quoted on the London Stock Exchange. In 1895 the company bought the legendary Soho Foundry in Smethwick, a former steam engine factory owned by James Watt & Co. In 1897 the move was complete and the steam engine business was gradually converted to pure manufacture of weighing machines. The turn of the century was marked by managing director William Hipkins who was determined to broadening the renown of the Avery brand and transforming the business into specialist manufacture of weighing machines. By 1914 the company occupied an area of 32,000m² and had some 3000 employees. In the inter-war period, the growth continued with the addition of specialized shops for cast parts, enamel paints and weighbridge assembly and the product range diversified into counting machines, testing machines, automatic packing machines and petrol pumps. During the second world war, the company also produced various types of heavy guns. At that time the site underwent severe damage from parachute mines and incendiary bombs. Then from 1931 to 1973, the company occupied the 18th-century Middlesex Sessions House in Clerkenwell as its headquarters. Changes in weighing machine technology after World War II led to the closure of the foundry, the introduction of electronic weighing with the simultaneous gradual disappearance of purely mechanical devices. The continued expansion was partly achieved through a series of acquisitions of other companies. After almost a century of national and international expansion, the company was taken over by GEC in 1979. Keith Hodgkinson, managing director at the time, completed the turn-around from mechanical to electronic weighing with a complete overhaul of the product range of retail sales of industrial platform scales. In 1993 GEC took over the Dutch-based company Berkel and the Avery-Berkel name was introduced. In 2000 the business was in turn acquired by the US-American company Weigh-Tronix, who already owned Salter, and is today operating as Avery Weigh-Tronix. An item used used by grocers and merchants to weigh store bought goods around the 1950s. This item gives an insight into social history of the time.Weights, metal, silver electroplated, 1 x 2lb, 2 x 4lb, 1 x 7lb. (4) all government stamped, made by Avery Ltd.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, weight, imperial weight, imperial standard weights and measures, imperial standard weight -
Flagstaff Hill Maritime Museum and Village
Functional object - Weight Avoirdupois, Avery Ltd, 1940-1950s
A weight made in England by W&T Avery a British manufacturer of weights and weighing machines. The company was founded in the early 18th century and took the name W & T Avery in 1818. The undocumented origin of the company goes back to 1730 when James Ford established the business in the town of Digbeth. On Joseph Balden, the then company’s owner’s death in 1813 William and Thomas Avery took over his scale making business and in 1818 renamed it W & T Avery. The business rapidly expanded and in 1885 they owned three factories: the Atlas Works in West Bromwich, the Mill Lane Works in Birmingham and the Moat Lane Works in Digbeth. In 1891 the business became a limited company with a board of directors and in 1894 the shares were quoted on the London Stock Exchange. In 1895 the company bought the legendary Soho Foundry in Smethwick, a former steam engine factory owned by James Watt & Co. In 1897 the move was complete and the steam engine business was gradually converted to pure manufacture of weighing machines. The turn of the century was marked by managing director William Hipkins who was determined to broadening the renown of the Avery brand and transforming the business into specialist manufacture of weighing machines. By 1914 the company occupied an area of 32,000m² and had some 3000 employees. In the inter-war period, the growth continued with the addition of specialized shops for cast parts, enamel paints and weighbridge assembly and the product range diversified into counting machines, testing machines, automatic packing machines and petrol pumps. During the second world war, the company also produced various types of heavy guns. At that time the site underwent severe damage from parachute mines and incendiary bombs. Then from 1931 to 1973, the company occupied the 18th-century Middlesex Sessions House in Clerkenwell as its headquarters. Changes in weighing machine technology after World War II led to the closure of the foundry, the introduction of electronic weighing with the simultaneous gradual disappearance of purely mechanical devices. The continued expansion was partly achieved through a series of acquisitions of other companies. After almost a century of national and international expansion, the company was taken over by GEC in 1979. Keith Hodgkinson, managing director at the time, completed the turn-around from mechanical to electronic weighing with a complete overhaul of the product range of retail sales of industrial platform scales. In 1993 GEC took over the Dutch-based company Berkel and the Avery-Berkel name was introduced. In 2000 the business was in turn acquired by the US-American company Weigh-Tronix, who already owned Salter, and is today operating as Avery Weigh-Tronix. An item used used by grocers and merchants to weigh store bought goods around the 1950s. This item gives an insight into social history of the time.Weight, brass, Stamped F27, 2lb.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, weight, brass weight -
Melbourne Tram Museum
Letter, Yarra Trams, "Tramlines", 2007 to 2009
Set of 7 letters, from Yarra Trams during 2007 and 2009 to Keith Kings re various maters, sending the latest issue of "Tramlines". 1 - 20/12/2007 - re tramlines 2 - 18/2/2008 - hand written letter to Paul, re not being able to receive the electronic version of tramlines and asking to be put on the mailing list for "The Pantograph". 3 - 11/4/2008 - tramlines, C2 trams, TramTracker and St Kilda Road. 4 - 23/4/2008 - response from Paul Matthews re his letter of 18/2 and sending a copy of the mini-CD - Driving with trams 5 - 12/8/2008 - re Bumblebee 2 - signed by Dennis Cliche 6 - 16/12/2008 7 - 23/3/2009 Signed by either Dennis Cliche as CEO or Paul Matthews as Marketing Manager.trams, tramways, yarra trams, passengers, letters, c2 class -
Ringwood and District Historical Society
Book, Diane Baird, Digging Into History - Goldmining in Warrandyte, 2007
Information about early mining in Victoria's first gold field. Cover photographs: Front cover - Fossickers working below the water-wheen driven stamper battery located on the south side of the Yarra River upstream of the Warrandyte Bridge. Back cover - The Old Post Office, Warrandyte, in 1906, now the premises of the Warrandyte Historical Society Museum and Archive, 111 Yarra Street.Acknowledgements: Several members of the Warrandyte Historical Society were involved in the development of this publication. It was developed and written by Diane Baird; Murray Houghton and Ted Rotherham provided specialist historical details and further references; Jo Laurence and Shirley Rotherham collected and identified photographs; Brian Laurence prepared images for electronic format; and Richard Morton edited and formatted the text. The Society gratefully acknowledges the dedicated work of all its members who collect, preserve and share Warrandyte's history. In particular, the research by the late Bruce Bence and the dedicated work of the late Jo Laurence have been an invaluable contribution to the history of Warrandyte. -
Kiewa Valley Historical Society
Camera Box Brownie Folding, Six 20 Folding Brownie KodetteII, Circa 1948 to late 1970s
This camera was made for the mobile photographer and the camera manufacturer Kodak was at the peak of production. Mr. George Eastman, the company's founder, who invented roll film, which could withstand the outdoor activities and therefor replaced photographic plates. In 1900, the Box Brownie camera was first released Kodak's motto was' "You push the button, we do the rest," The film used in this camera was Kodak Verichrome 620 introduced in 1936 and only went out of production 2009. This camera was a vintage 1970s one. Between 1963 and 1970 the company sold 50 million of this type of camera. The production of smaller and more user friendly digital cameras, mainly from Japan finally nailed the coffin lid on the Kodak Company. Ironically, one of Kodak's engineers called Steve Sasson, devised a camera that could save images using electronic circuits. The images were transferred onto a tape cassette and were viewable by attaching the camera to a TV screen, however Kodak tried to maintain its photographic film products beyond its "use by date". In1975 Kodak becomes the first company to make a digital camera, however the Japanese manufacturers could make smaller and more compact cameras ending Kodak's monopoly and eventual demise.This particular "box brownie" was used by Margaret Shefford, nee Turner, who with her husband retired, in the 1980s, to Mount Beauty. The camera was purchased in the 197's and used on their cruise to England. The significance of this item is that at the time of its introduction to Mount Beauty the camera was a "state of the art", for general public, camera introduced by an ever increasing influx of retirees. This identifies the Kiewa Valley not only as an attraction for sightseers and overseas tourists but also retirees. The social implications of this trend will continue to provide a broader requirement for medical and other facilities geared up to the requirements of an aging population. As a lot of cities in Australia have increasing levels of violence (mainly drug related) rural "retreats" are becoming more sought after by sections of "the gentle populous"This is a black metal rectangular camera, rounded on the ends and has silver colored fittings(stainless steel) and a small leather handle on hinges the left side (facing the lens). The folding lens and shutter component fold out from the main compartment. Two metal arms swing out and hold the lens and collapsible lens body to the required length. When not in use this collapsible (folding) lens extension is fastened to the main body structure providing security and preventing damage to the folding material. The camera has a collapsible eye piece or view finder at the top end. The right hand bottom end has a cylindrical film wider (polished steel). Inside there are two cylindrical cavities, one holding the roll of unexposed film and the other (winder) end a cylinder onto which the unexposed film is wound through for each picture frame. There is a locking mechanism to hold the folding lens structure to the main box structure. See KVHS 0419B for its carrying caseNo external makings but when the lens is folded out it exposes manufacturing information on metal base around the lens " Kodette II B I shutter"(B= Bulb and I= Instant), underneath this, in larger print, is "'FOLDING 'BROWNIE' SIX - 20" below the lens and in smaller print, "made in Great Britain" and underneath this "by KODAK ltd"kodak kodette ii, folding brownie camera, photography, hobby personal item, tourist gadgets. -
Victorian Aboriginal Corporation for Languages
Conference proceedings, Mary Jane Norris, Endangered languages beyond boundaries : community connections, collaborative approaches and cross-disciplinary research =? Langues en pe?ril au-dela? des frontie?res : connexions communautaires, approches collaboratives, et rechecrche interdisciplinaire : proceedings of the 17th FEL Conference Carleton University, Ottawa, Ontario Canada 1-4 October 2013, 2013
Session 1: Collaborations with language and cultural organizations, and governments Session 2: Collaborations with universities, researchers, institutes and schools Session 3: Strategies/issues across language, culture, geography, place and generations I: standardization and dialects Session 4: Strategies issues across language, culture, geography, place and generations II: Minority languages, regions and rural/urban areas Session 6: Language and culture connections: Health, well-being, and educational outcomes Session 7: Strategies/issues across language, culture, geography, place and generations III: Generations and families Session 8: Language assessment, documentation and diversity: Indicators of vitality, endangerment and the implications of data collection Session 5: Poster sessions I: Hard copy: Community connections, collaborative approaches, cross-disciplinary research Session 5: Poster session II: Electronic: Collaborative approaches with information and computer technologiesmaps, b&w photographs, colour photographs, illustrations, graphscollaboration, community involvement, cross disciplinary research -
Bendigo Historical Society Inc.
Document - PETER ELLIS COLLECTION: NEWSLETTER
Newsletter page. Items include an Idea by Barry, More from the National Folk Festival Canberra by Peter, a comment on the Festival from the Barkers, a comment on the rain and dancers and musicians by Anon, a comment by Kurt (Ian Walder) regarding electronic instruments in a band and the culture and heritage were popular, Asst Editor wanted some strong Groupies to move a piano, Olive Dobbyn commented on the weather, the lack of a piano, the Australian content and Ted Egan playing his fosterphone and singing 'the Drover's Boy', and Carol Higman commenting on the dances, how well the festival went and thanked Mary, Peter and anyone else who helped to organise the trip to the 1994 National Folk Festival. Handwritten at the top of the page is a thank you from Dianne and Barry for the success of Ben's 21st Birthday Party, Geoff Barker at the BBQ, Don & Julie for helping set up and for Videoing and Garry Clancy for calling and overnight caretaking.person, individual, peter ellis oam, peter ellis collection, shirley andrews, monaro colonial dancers, emu creek, bush dance and music club, colin silk, rob willis, ted egan, the barkers, kurt (ian walder), olive dobbyn, carol higman, geoff barker, garry clancy -
Flagstaff Hill Maritime Museum and Village
Equipment - Balance Scale, 1850s
A Large Rare mid 19th Century Balance Scale (also called a Beam Scale) Made in England by W&T Avery a British manufacturer of weighing machines. The company was founded in the early 18th century and took the name W & T Avery in 1818. The undocumented origin of the company goes back to 1730 when James Ford established the business in the town of Digbeth. On Joseph Balden the then company’s owner’s death in 1813 William and Thomas Avery took over his scale making business and in 1818 renamed it W & T Avery. The business rapidly expanded and in 1885 they owned three factories: the Atlas Works in West Bromwich, the Mill Lane Works in Birmingham and the Moat Lane Works in Digbeth. In 1891 the business became a limited company with a board of directors and in 1894 the shares were quoted on the London Stock Exchange. In 1895 the company bought the legendary Soho Foundry in Smethwick, a former steam engine factory owned by James Watt & Co. In 1897 the move was complete and the steam engine business was gradually converted to pure manufacture of weighing machines. The turn of the century was marked by managing director William Hipkins who was determined to broadening the renown of the Avery brand and transforming the business into a specialist manufacture of weighing machines. By 1914 the company occupied an area of 32,000m² and had some 3000 employees. In the inter-war period the growth continued with the addition of specialized shops for cast parts, enamel paints and weighbridge assembly and the product range diversified into counting machines, testing machines, automatic packing machines and petrol pumps. During the second world war the company also produced various types of heavy guns. At that time the site underwent severe damage from parachute mines and incendiary bombs.Then from 1931 to 1973 the company occupied the 18th-century Middlesex Sessions House in Clerkenwell as its headquarters. Changes in weighing machine technology after World War II led to the closure of the foundry, the introduction of electronic weighing with the simultaneous gradual disappearance of purely mechanical devices. The continued expansion was partly achieved through a series of acquisitions of other companies. After almost a century of national and international expansion the company was taken over by GEC in 1979. Keith Hodgkinson, managing director at the time, completed the turn-around from mechanical to electronic weighing with a complete overhaul of the product range of retail scales and industrial platform scales. In 1993 GEC took over the Dutch-based company Berkel and the Avery-Berkel name was introduced. In 2000 the business was in turn acquired by the US-American company Weigh-Tronix, who already owned Salter, and is today operating as Avery Weigh-Tronix. Item made and used possibly around the 1850s by Victorian colonial government to check weights of goods being sold by early shop keepers on the gold fields item is very rare.James McEwan & Co were the retailers of W & T Avery scales in Victoria from 1852. A very rare item used probably to check weights used by merchants during colonial times by government inspectors in Victoria. A similar example exist in a NSW museum, the item is believed to have been made before W & T Avery expansion to the Soho foundry in Birmingham in 1885 and after 1818.Beam balance scale suspended from a wooden tripod, with metal trays suspended by three chain lengths. embossed on the balance beam W T Avery, Birmingham,flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, scale, avery -
Federation University Historical Collection
Document - Document - Syllabus, Education Department: Technical Schools Syllabus, 1921
A syllabus for each subject taught in Technical Schools that was provided by the Education Department of Victoria. .1: Syllabus for Heat Engines - side 1, Grade 1; side 2, Grade 2 .2: Syllabus for Refrigeration - Grade 1 and Grade 2 on side 1. .3: Syllabus for Farm Irrigation and Irrigation Engineering - side one, Farm Irrigation; side 2, Irrigation Engineering. .4: Mechanics and Mechanics applied to Mining - 4 pages covering Mechanics (Applied) Grade 1, Grade 2, Mechanics (Applied) Structures, Grade 3, Mechanics (Applied) Machines, Grade 3; Mechanics Applied to Mining and Theoretical Mechanics .5: Syllabus for Mechanics and Heat - First Grade Mechanics students will be required to know the general principles and formulae of the science, apparatus used method of using and to verify formulae experimentally. Second Grade course includes all subjects for Grade 1 plus Newton's proof of the parallelogram of forces, rotation round fixed axis, laws of rotary motion of a body, resistance, harmonic motion, friction,impulsive forces, barometer corrections and Heat and thermodynamics. Third Grade students, an intimate knowledge of the courses for first and second grades plus remaining portions of thermodynamics. A special course for Evening Students in Mechanics and Heat outlined. .6: Syllabus for Electricity - covers the requirements for First Grade, Second Grade and Grade 3. Areas covered are Magnets and Magnetism, Electroscopes and Electrification, Electronic Fields, Voltaic Electricity, Measurement of Current, Electromagnetism, Amperemeters, Resistance, Electrical Technology,A5 size pages, typed. Some are doubled sided.education department victoria, technical schools, syllabus, 1921, heat engines, refrigeration, farm irrigation, irrigation engineering, mechanic, mechanics applied to mining, mechanics and heat, electricity -
Broadmeadows Historical Society & Museum
Equipment - Camera, Kodak Eastman, 1980 - 1982
Development Of Amateur PhotgraphyAdds To Story Of Amateur photographyBlack Tele-Ektralite 600 Camera with Flash Case Folds Dolon to Form Handle Uses 110 Film Battery Compartment 3 TokenTop : Open Badge : Kodak Tele - Ektralite 600/Camera Engraved Electronic Flash : Closed : Badge : Kodak . Embossed 600 Front Badge : Kodak; Embossed ResmaLens / 22/24 mm Bottom; Embossed Working / High Voltage / Do Not Disassemble/ Made In USA Battery Compartnment Open Inside: As 100/4-12ft/Pi/ 1.2.5.7m; Asa 400/4-18ft/Pi/ 1.2-5.5 m Pt/Pi 00-25 50-10 12.5-6.5 7-4.5 4.5-3.5 screen Printed m 00-8 15.3 4-2 2-1-1-4 1-4-1-1 ( Picture ) Mountain Half Body ( Hids ) 5 Body Waist Head + Shoulder Face photography, camera -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s - set of 4, WHO. Robinson, c1905 of original
1890.1 - Black and white copy photograph of a damaged photograph of a ESCo Bendigo tramcar at Charing Cross, Bendigo, c1905. Original photograph has been damaged - mounted onto a sheet of card, with "WHO. Robinson - Photo - Bendigo" printed onto the sheet. Tram photographed side on, has not been fitted with windscreens. has a "Silver Star Starch" roof advertisement and has "Bendigo Tramways" painted onto the side of the tramcar. In the background of the photograph are buildings in Gardens area that front View St. Also the Shamrock hotel can be seen in the distance. 1890.1 - copy of same photograph but with a better reproduction and repair of the print. 1890.3 - Electronic copy of same photograph donated by Ron Hann on a CD of photographs given to him at the time of his visit in January 1963 by the Manager. Refer to email held with item 3841. Added 28/2/2010. No actual print, held on digital file only - see image 1890i3. See Reg Item 4568 for the CD. 1890.4 - Black and White print contained within the Wal Jack Bendigo and Geelong Album, see Reg Item 5003 for more details. Added 2/7/2013. On rear of 1890.2 - "Bendigo" in ink in top right hand corner and in pencil "(Similar truck to original Ballarat car No. 18"trams, tramways, bendigo, esco, view st, silver star starch -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s - set of 2, Richards & Co Ballarat, mid 1920's
Yields information about ESCo tram No. 18 and the way it was presented about 1930.Black and white photograph contained within Reg. Item 2488, page 27, of ESCo No. 18, side on view of tram showing arrangements after windscreens installed and seats reversed. Photographed at Grenville St., after the large tramway shelter removed. Tram fitted with a Suttons Pianos and Players roof ad board. Has an "Enter Front End" sign on the rear of the tram. Photo about the mid 1920's On the right hand edge of the photograph is a faint stamp "Richards & Co / Photos". Alongside photo is a handwritten not on the size of the motors fitted to the various ESCo trams and the weight of the trams. Note Item Not formally Numbered. Image btm2489i3 shows position on page relative to items 2489, 91 and 92. 2490.1 - Electronic copy of same photograph donated by Ron Hann on a CD of photographs given to him at the time of his visit in January 1963 by the Manager. Refer to email held with item 3841. Added 28/2/2010. See Reg Item 4568 for the CD. High Res Images added 15/3/2011. See Reg Item 1879 for other copies of this photograph.Numerous on page, mainly in ink and pencil.tramways, trams, esco, grenville st, motors, suttons, tram 18 -
Bendigo Military Museum
Photograph - RASvy Surveyors in the field, c1950s – 1960s
This is a set of 16 photographs of surveyors in the field measuring distances using chains, taking observations using theodolites and operating electric distance measurement equipment. They were probably employed in establishing mapping and geodetic control operations or the surveyors may have been in training. The photos were most likely taken in the 1950s and 1960s. Photos .1P to .6P feature personnel setting up geodetic survey chaining equipment to measure distances. The surveyor in Photo .5P is LTCOL Howard Angus Johnson MBE who served from 1936 to 1954. The RA Svy surveyor in photos .7P to .12P were using a theodolite to take angular measurements. They were usually supported by an observer who recording their readings on a booking form. The surveyor in Photo .10P and .11P is LTCOL Jorge Gruszka, who served from 1955 to 1985. He was CO of the Army Survey Regiment from 1982 to 1985. The surveyor in photo .13P is cutting an identification blaze on a tree using a hammer and chisel. The tellurometer in Photos .14P to .16P was a MRA1 microwave Electronic Distance Measuring instrument (EDM) introduced in 1958. It and later models were man-portable systems that improved geodetic survey efficiencies for rapid network extension and densification replacing triangulation with EDM and theodolite traverse sometimes using Bilby Towers to extend line lengths. The surveyor with the slouch hat is Colonel James ‘Jim’ Leslie Stedman, who served from 1941 to 1978. He was Director of Military Survey from 1975 to 1978 and was appointed as Colonel Commandant (honorary appointment, Retd) of the Royal Australian Survey Corps from 1978 to 1983. Jim Stedman is demonstrating EDM equipment.This is a set of 16 photographs of surveyors in the field measuring distances using chains, taking observations using theodolites and operating electric distance measurement (EDM) equipment. c1950s – 1960s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1950s, unidentified personnel using geodetic survey chaining equipment. .2) to .4) - Photo, black & white, c1950s, geodetic survey chaining equipment. .5) – Photo, black & white, Jim Stedman using geodetic survey chaining equipment to measure distances. .6) - Photo, black & white, c1950s, geodetic survey chaining equipment. .7) – Photo, black & white, mounted on card, c1950s. Unidentified personnel undertaking observations on a coral reef using a theodolite. .8) – Photo, black & white, c1950, unidentified personnel undertaking observations with a Tavistock theodolite. .9) – Photo, black & white, mounted on green card, c1950s. Unidentified personnel undertaking observations with a theodolite. .10) – Photo, black & white, c1955, Jorge Gruszka undertaking observations with a theodolite. 7/55 Basic Survey Course Balcombe. .11) – Photo, black & white, c1950s, Jorge Gruszka undertaking observations with a theodolite. .12) – Photo, black & white, c1950s, unidentified personnel undertaking observations with a theodolite. .13) – Photo, black & white, c1950s, unidentified personnel cutting a blaze in a tree. .14) and .15P – Photo, black & white, c1960s, Jim Stedman demonstrating EDM equipment. .16P – Photo, black & white, c1960s, L to R: probably Jim Stedman and unidentified personnel demonstrating EDM equipment..1P on back - First Order Chaining Equipment .2P on back - First Order Chaining Equipment .3P on back - Full catenary 1800 – 1960 replaced by EDM .4P on back - First Order Chaining Equipment .5P on back - H.A. Johnson, Benambra baseline? 1st Order Chaining .6P on back - Chaining .7P on front - Difficult observing conditions especially when the tide is in. The station is sighted (sic) on a coral reef. .8P on back - Tavistock. .10P on back of duplicate in Photo Folder 14 – George (sic) Gruszka 7/55 Basic Survey Course Balcomme (sic) 1955/56 .14P and .15P on back - Jim Stedman demonstrating early EDM equipment.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying -
Deaf Children Australia
Sonotone 700 Hearing Aid, Sonotone, 1946
Although Lee DeForest invented the triode vacuum in 1906, it was not employed in hearing aids until 1921. The first hearing aid using a vacuum tube was purported to have been made by Earl C. Hanson. He called his hearing aid the Vactuphone. It used one small peanut tube (below right) to amplify the output of a carbon hearing aid. The Globe Hearing Aid Company and Western Electric collaborated to manufacture the Vactuphone. By the early 1940s, Raytheon had developed miniature vacuum tubes. It was these miniature vacuum tubes that made body-worn hearing aids a reality. Unfortunately, the power requirements of these aids made it necessary to use two relatively large batteries—an "A" battery to power the filaments of the vacuum tubes and a "B" battery to supply the high-voltage for the plate current. The batteries were worn external to the hearing aid itself and the name "Two-piece" hearing aid was used to describe them. Until about 1945 "Two-piece" hearing aids were the norm. However, improved vacuum tube design reduced current requirements. As a result, battery manufacturers were able to reduce the size of the batteries used in hearing aids. At the same time, electronic components were also being miniaturized. This allowed the hearing aid manufacturers to design hearing aids with internal batteries. After 1945, these "One-piece" hearing aids quickly replaced the more cumbersome "Two-piece" hearing aids. With continuing improvements in both batteries and components, hearing aids continued to reduce in size until 1953 when the vacuum tube was suddenly supplanted by the transistor.Fawn plastic hearing aid with metal clip on back and wires leading from the bottom. Made in the USA, sold by Angus & Coote as the Sole Australian Agents. The Model is the Sonotone 700. Two dials one on each of the top corners."ANGUS & COOTE/Sole Australian/Agents/C D C" Printed in black on the back, top left hand corner. "SONOTONE/700/SERIAL NO/843218/MAD IN U.S.A./SEE PATENT NOTICE/IN INSTRUCTION BOOK" imprinted on back, centre middle.deaf children australia, hearing aid, sonotone hearing aid, sonotone 700, angus & coote -
Running Rabbits Military Museum operated by the Upwey Belgrave RSL Sub Branch
Ikara Missile, Maribyrnong Ordinance Factory in Victoria. et al, 1965
During the 1950’s, the growing threat from Submarines, led the Royal Australian Navy to consider a quick reaction, long range ASW torpedo delivery system as an alternative to the USN’s ASROC and the RN’s Match. Full scale research and development began in 1960 using the Turana target drone as the basis for the delivery platform. Shipboard tests began in 1963 and the Government Aircraft Factory (GAF) began production of three variants M3, M4 and M5 in 1965. The M4 variant had a guidance system designed to interface to a full tactical data handling system while the M3 and M5 variants used a simpler system with a dedicated fire control system. The IKARA is an unmanned miniature aircraft with clip on upper and lower stabilizers and wings. The upper stabilizer (SVU) housed and electronic package that transmitted flight data back to the launch platform and received updated target acquisition data during flight. Flight maneuverability was provided by elevons fitted into the trailing edge of each wing, these were operated by an actuator system that received flight correction data transmitted to the autopilot from the fire control system. The payload, either the Mk44 or Mk46 lightweight torpedo was suspended to the underside of the airframe and faired into the body to provide and aerodynamic shape. The forward section of the body housed the autopilot and the thermal battery unit. Propulsion was provided by the MURAWA steel cased, solid propellant rocket motor with a combined boost and sustainer stage. IKARA was capable of engaging a target to the maximum range of the ships sonar, regardless of weather conditions. Target information is fed into the fire control system, which calculated to drop zone for the torpedo taking into account speed and direction of launch platform and target, win speed etc, then tracking the missile to the drop zone where command signals initiate torpedo release. The IKARA is an unmanned miniature aircraft with clip on upper and lower stabilizers and wings. navy, torpedo, rocket, submarine, missile