Typed information as follows: Originally the kitchen of the original Springhurst Carrier Arms Hotel, Circa 1913, was skidded to Donovan's property (Barnett Place) by John Wightons traction engine, and served as Springhurst Post Office until 1928. 1929-32 it was a general store, operated by Walter T Dawson. In 1955 it was relocated by Buscall & Cullen, builders of Rutherglen to the property of JE Blampied at CarlyleColoured photograph pasted on white card with typed information of buildingspringhurst carrier arms hotel, donovan, wightons, springhurst post office, dawson, blampied

Dudley House at 60 View St, Bendigo was built by builders, Gretchen and Cooper for the public Works Department in 1858-59. It was originally built for the district surveyor, Richard Larritt, who designed the Bendigo street layout. One of its earliest claims to fame was the hosting of world famous singer, Jenny Lind, in 1861, when she sang to raise money for charity.A nine page document theorizing the history behind the name of the Dudley House building. Written and presented by Terry Davidson.dudley house, view street, bruhn, serah bruhn

Builders Number 4767 Used for steam engine driving instruction at the Royal Melbourne Institute of Technology build date of approximately 1884 +/- 1 year. worked out from http://www.internationalsteam.co.uk/mills/burmamill22.htm Donated by The Royal Melbourne Institute of technology in 1969 Of Interest : The Vertical and Horizontal Tangye engines on display are of the design that won a Gold Medallion at the Paris Industrial Exhibition of 1878.Historic - Industrial Steam Engine EquipmentSteam Engine - Cast Iron (painted) Steel (raw) Bronze (Raw) Timber (Oiled)Tangye Birminghampuffing billy, steam, rmit, tangye, horizontal engine

Wal Jack kept extensive notes on railways and tramways around the world, provided by his correspondents and research. This set of sheets lists PCC-type streetcars or trams ordered by North American cities between 1936 and 1947, including a summary of who ordered the most cars. Includes note on the builders. When compared to the reference, there are errors or differences. Bickarts were Ballarat Watchmakers and Jewellers.Yields information about type of work undertaken by Wal Jack.Four orange colour quarto sheets using Bickarts' letterhead providing lists of PCC Type trams built for North American cities.letters, wal jack, archive, usa, records, bickarts, pcc trams

Arthur Hoey, a Port Fairy Builder inspecting the ruins of a cottage on Albert Road. Arthur went on to restore the cottage. Research done by family found that the house a t one stage belonged at one time to Chidley a photographer . Further information also to hand mentions the area being used by Stan Chidley for a "scent farm". Several types of herbs and flowers were being grown thereColoured photograph of Arthur Hoey standing in a hole in the wall of the cottagecottage, building, home, house, albert road, scent farm

This is a pencil used by carpenters and builders and other tradesmen on site. It has been produced in a flattened shape to prevent it from rolling away. The pencil advertises a Warrnambool business, Pontings Timber and Hardware. This business was founded in 1923 by brothers Walter and Len Ponting. Three of Walter’s sons took over the business in the 1940s and today it is still operated by members of the Ponting family. The business is at 110 to 114 Kepler Street.This pencil is of interest as it advertises a prominent Warrnambool business, Pontings Timber & Hardware. This business has operated in Warrnambool for 95 years.This is a rectangular-shaped wooden pencil with a yellow coating and graphite inserted inside the wood. There is printing on both sides of the pencil. It has been sharpened at one end and part of the pencil has been used up. ‘Pontings Timber & Hardware PH 62..’ ‘Stanley Bos…’ pontings, timber & hardware, warrnambool history

In the early 1900s, Melbourne builder Charles Keefer was hired by the Moorabbin Council to build the municipal baths at Beaumaris. In 1903, Keefer took over the Beaumaris Boat House and enlarged it to form Keefer's Boat Shed where day trippers and holiday makers could hire boats and venture out into the bay. Although rebuilt following the devastating storms in 1934, Keefer’s Boat Shed was completely destroyed by fire in 1984.Realismkeefer's, boatshed, bayside, coast, beaumaris, fence, water, bay, charles keefer, pier, mike green

After training as a Cartographic Draftsman within the mining industry, I worked as a property illustrator for real estate firms in the eastern suburbs of Melbourne for 22 years from 1983. I initially photographed houses with a Polaroid camera and made a 'thumbnail' sketch while there. The photos were used to scale off a sketch in pencil and then that sketch was overlaid with drafting film and the 'pen and ink' completed. The pens I used were the Rotring ‘Rapidigraph’ drafting pens. The ink was also made by Rotring (German).The film was ‘Rapidraw’, polyester drafting film, double matte. It takes a very fine line and doesn’t bleed. As well as house sketches, there were often floor plans and site plans ordered. Aerial sketches were ordered when the property needed an overall view. (Margaret Picken, 2020)Built in 1968-1970 to a design by Graeme C Gunn, 76 Molesworth Street is one of a series of innovative townhouse developments undertaken by Merchant Builders in the late 1960s, this particular example was the recipient of the Bronze Medal at the Victorian Architecture Awards in 1970. The drawing is one of a series created by Margaret Picken for a number of real estate agents in Melbourne between 1983 and 2006. Each work is signed and dated by the artist.Gift of Margaret Picken, 2020Pen and ink architectural drawing on drafting film of 2/72 Molesworth Street, Kew by Margaret Picken.2/72 MOLESWORTH ST., KEW / MARGARET PICKEN ~98 / WOODARDS ~ HAWTHORN (REAR VIEW)artist -- margaret picken 1950-, architectural drawings -- houses -- kew (vic.), 2/72 molesworth street - kew (vic)

LU 600 the first of the Small Town Units, designed and built by the Country Fire Authority. (CFA) The late Wally Titheridge, Chief Mechancal Officer of the Country Fire Brigades Board, CFBB, and its successor the CFA, stated in an interview in the early 1990's that the vehicle was designed by himself, and built by a body builder in Preston. This was the first of many hundreds of the Small Town Units, on maily Austin, but also Bedford, Leyland, and BMC Chassis. The early series trucks had a 200 gallon (900 Litre) tank, which was proving usefull, but "more is always better" , so the next series had 400 gallon (1000 litre) tanks.

Journal of the Tramway Museum Society of Victoria. Ltd. Volume 8, No. 3, June 1971. Thirty five cents. Sixteen pages. Front cover picture (right) from Victorian Railways, shows tram no. 304 which was one of 100 W class tramcars. 60 of them, including this one, were built by Holden's Body Builders of Adelaide. They were transported by rail to Melbourne then lifted onto horse-drawn vehicles for the final stage of their journey. On back cover (left) photo by R. Prentice. Picture of Bylands where the society is building a tramway museum for Victoria. History of document: Part of 'Basil Miller Tramways Collection'document

Pittock collection: assorted chisels, spikes and tools * two metal punches, 220 mm L / 145 mm L * two chisels with wooden handles, 140 mm / 310 mm L * two steel chisels200 / 140 mm L * one centre drill 145 mm L 35 mm R * one metal spike with eyelet, 275 mm L x 25 mm W * three metal spikes160 mm L * one unknown tool with free arm, 255 mm L x 25 mm W Tools stored in Pittock coach builder's box, reference 13000.1.

Pittock collection: three tenon saws, used in a mitre box to trim timber * Saws vary 305(2)-360 mm blades, three different teeth pitch * Two saws manufactured in cast steel by Henry Disston & Sons, Philadelphia U. S. A., the longer saw has a temporary repair of the handle with wire restraining the cracked timber handle * Third saw has Albert E Pittock inscribed in the steel blade, Pittock is also etched into the timber handle. The saw was manufactured in cast steel by Bray & ?rason, Sheffield. Items stored in Pittock coach builder's box, reference 13000.1.

Pittock Collection : three wrenches, steel construction. Two individual wrenches: * one adjustable wrench , 230 x 80mm, made by the Footprint company, Sheffield, England. * one small (rusted) wrench, 165mm long; made by COES Wrench Co, Worcester, Mass. U.S.A. * One wrench set, for eight pieces (two smaller pieces missing) drop forged steel, made by The Keystone MFG, Co. Buffalo, U.S.A.; folded sheet steel ''case", rusted in places. Wrench 230 mm long x 40 mm wide x 60mm high. Items stored in coach builder's box, reference 13000.1.three wrenches manufacturers as noted

Bound book the Temple Builders compiled by Alex H. Stone, 10th May 1988. this book refers to the people responsible for the erection of the Masonic Temple in View Street Bendigo. The book also makes reference to the way of life and how news was circulated in a time before newspapers. This book also gives an understanding of how the group was first formed. Other material refers to the laying of the foundation stone on 24/6/1873. Centenary Souvenir of the laying of the Foundation Stone of the Masonic Hall, View Street, Bendigo on 24th June 1873. Photo of the laying of the foundation stone. Architects of the project were Vahland and Getzschmann.Alex H. Stoneclubs, social, bendigo masonic lodge

Contract document contained within a manila file cover titled "Contract - Melbourne Tramway & Omnibus Co. for Additions to Car Shed at Brunswick 1910". Comprises: 1 - three preprinted "Articles on Contract" completed in ink for the relevant contract clauses for the builder - Wilson Sly of Elsternwick by the Architect Inskip & Kemp. for the sum of 397 pounds, dated 14/5/1910. 2 - 7 ruled sheets with TE watermark and a hand written specification for the work with pencil notes. Signed by Wilson Sly and H.A. Wilcox Secretary of the MTCo. 3 - Sheets pinned together with a brass nickel plated clip in the top left hand corner.trams, tramways, brunswick, brunswick depot, mto co, construction, depots, cable trams

Single page foolscap document photocopied titled "New Trams for Melbourne". Gives details of the Z class trams, equipment, safety features, dimensions and details of builder and suppliers, along with a comparison table between W7 class trams, Prototype 1041 and the Z class See also Reg Item for the 2254 for a draft document headed "New Trams for Melbourne" See Reg Item 86 for the newspaper item for the launch of the tram on 30/4/1975 .1 Electric Traction - May 1973 - with a cover photo of 1041 and an article detailing the tram written by John Prideaux, photos by Len Millar. Published by the AETA.trams, tramways, z class, launch, press release, new trams, w7 class, 1041, prototype tramcar, electric traction, tram 1, tram 1041

Gestener print of a sheet titled "Data sheet for "W2 Day", TMSV special tour, Sunday 19/5/68", listing the tramcars used on the day; car number and depot, motors, controllers, date in service, class, date converted and class, body builder, roof, date of Upholstered seats in saloons, sun shades and notes on the tramcars them selves. Data for 567, 407, 585, 547, 332, 436 and 233. Made by Keith Kings May 1968. See Reg Item 605 for the ticket used on this tour and Reg item 3543 for a photograph of tram W2 332 at Wattlepark Loop."K. S Kings May 1968" in bottom right hand corner in light blue ink.trams, tramways, tramcars, mmtb, lists, tours, w2 class, tmsv

Malcolm Moore No. 1013 Four wheel Diesel Rail Tractor Gauge 2'0" Malcolm Moore rail tractor (Builder’s Number 1013) It was built for the Australian Army in 1943. It was sold to the Inkerman Sugar Mill in Queensland around 1948 for hauling cane and shunting at the works. This rail tractor was originally powered by a Ford side valve V8 petrol engine. It was purchased from the Inkerman Mill of Pioneer Sugar Mills in 1982. Historic - Industrial narrow gauge Railway - Diesel Rail Tractor - used by the Australian Army and Inkerman Sugar Mill in QueenslandDiesel Rail Tractor made of iron and wrought irondiesel rail tractor, puffing billy, inkerman mill, industrial narrow gauge railway, gauge 2’0”, inkerman sugar mill, australian army

Boyd proposes that the architect can play an important role in the community, engaging through: 1. his own work; 2. in voluntary professional activity in the RAIA; and 3. in private community activity, eg giving advice to charities and giving public talks. He argues that although architects are often no longer project leaders (a role now taken by big builders and developers) they nonetheless are, and should remain, moral and artistic leaders.Original manuscript of article published in Bulletin, 2 Oct 1971. The Bulletin page is attached.Handwritten (pencil), quarto, 1 (handwritten), 1 torn out page of the Bulletin Reviewraia, architectural professional conduct, volunteering, robin boyd, manuscript

Keith Hancock was a senior teacher at Box Hill Technical College in Dunloe Ave, Box Hill c. 1976. Keith was a student at what was then Box Hill Technical College in 1949 - 1952. Then as apprentice in 1953 - 56 qualifying as a carpenter. He was a third generation builder generally working in the City of Nunawading. He eventually trained as a teacher 1964/65 and returned to Box Hill Technical College as a senior teacher c. 1976.Navy blue tie with white stripe and White Horse embroidered on lower edge.costume, male

This sketch was published in Building : the magazine for the architect, builder, property owner and merchant, Vol. 33, No. 193 (12 Sept., 1923) but Walter Butler had imagined it in the design for the mission in 1916/17. In the article published in the Herald, Thursday 30 August 1917, page 12, it is mentioned the "the architect has designed a copper ship final for the main gable of the building and it, like the gymnasium, is awaiting the collection of more funds or the generosity of a special donor."The plans confirm that Walter Butler was the designer of the vane that he had already imagined in the early sketch of the Flinders Street building in 1916 and also help us determine when was the vane made.This article was published in 1923 and the first photograph of the weathervane was only published in the 1928 Annual Report. The plans are significant as they could potentially help rebuild the weathervane stole in March 2022. Plans for the weather vane, Seamens' Institute building, Melbourne, Victoriawalter richmond butler (1864–1949), windvane, weathervane, finial, flinders street

Set of two documents downloaded from the respective websites about the announcement of an order for the next 100 trams for Melbourne to be known as the G class tram. Gives details of the builder (Alstom), the contract price, the trams and that they would largely be manufactured in Melbourne at Dandenong. The (Government's) document explains their reason why the tram is to be known as the G class rather than using the next letter (F), in the alphabet following E for the E class tram. Yields information about the proposed new type and class of tram for Melbourne.Set of two press releases regarding the new "Next Generation" trams for Melbourne, to be known as the G class .1 - 8 page - from Alstom .2 - 12 page from the Victorian Department of Transportnew trams, design of new trams, g class, trams, tramways, melbourne, alstom, department of transport, press releases

Contents: • You Are History by Jim Connor • Our Next Meeting – 7.30pm Wednesday 12th October 2022 • Heritage Excursion – Montmorency Bushland Reserves - Saturday 5th November • Sibbel Builders – A Rich History by Jim Connor • Reminiscences of 1930s Eltham by Edith Jones (nee McLean) • Reflections of Growing Up in Research by Lyn Hardiman (nee Dodkins) • Eltham Cemetery Stories by Liz Pidgeon o Mary Carrucan The Shire of Eltham Historical Society was formed in October 1967. The first newsletter of the Society was issued May 1978 and has been published continuously ever since on a bi-monthly basis. With the cessation of the Shire of Eltham in late 1994, the Society's name was revised to Eltham District Historical Society and this name first appeared with issue No. 103, July 1995. The collection of the Society's newsletters provides a valuable resource on the history of the Society's activities, office bearers and committee members, guest speakers and subjects of historical interest pertinent to the former Shire of Eltham and the Eltham District.A4 newsletter distributed to members (Digital and A4 photocopy)newsletter, eltham district historical society

George Tibbits, University of Melbourne. Faculty of Architecture, Building and Town & Regional PlanningIndex system that support the research for Beechworth : historical reconstruction / [by] George Tibbits ... [et al]Arranged by street names of BeechworthEach index card includes: street name and number of property, image of property, allotment and section number, property owners and dates of ownership, description of the property according to rate records, property floor plan with dimensions.beechworth, george tibbitsbeechworth, george tibbits

Incorporated the original canteen built in 1961, using funds raised by the College Ladies Committee under the leadership of Mrs. T.H. Kneen. Building designed by the Investigation and Development Group of the PW.D. with Des Bloink as Supervising Architect, Mackenzies Constructions Pty. Ltd. was the builder. Financed by funds provided through the State Grants (Advanced Education) Act 1969.Note by T.H. Kneen "At rear, partly obscured is C.E. Cole Deputy Director of Agriculture."3 copies black and white photograph. A group of men and a student, Brian Ward, Dux, with Hon. Rupert Hamer standing outside the Student Amenities BuildingOn reverse of 1 copy, " Official Opening of Student Amenities Building L-R Dr David Wishart Director-General Dept Agr, Dux of College, Hon. R.J. Hamer Premier, Victoria, Hon. Ian Smith Minister for Agriculture, C. Pymble Cook Chief of Division of Agric Edn., Eric Littlejohn Principal, BHC." and on all copies, "Photograph by Information Branch Victorian Department of Agriculture Ref. No. E206(4).opening, student amenities building, dr david wishart, director-general, hon. r.j. hamer, premier of victoria, hon. ian smith, minister for agriculture, e.b. littlejohn, principal, burnley horticultural college, ladies committee, des bloink, supervising architect, mackenzies constructions pty. ltd., c.e. cole, deputy director of agriculture, canteen, dux, publicity

A collection of 5 manuals for a range of Clyde Diesel Locomotives. The collection includes instructions for the Clyde G8B, G16C, G26C, 1800 HP Model A and the Clyde Mailiner Model 2. On the cover of each manual, the owner has written the letter for the name of class which the relevant locomotive was ascribed in Victoria. The Clyde Engineering Company Limited was registered on 30 September 1898 in New South Wales. It was one of the iconic Australian engineering firms whose history spanned just over a century and was one of the few locomotive and rolling stock builders in the world that transitioned from steam to diesel to electric traction. The company was formed by Walter Maplesden Noakes who purchased the works of Hudson Brothers Limited in the Sydney suburb of Granville, which had been established by in 1882. The manuals refer to the following locomotives:- Clyde Model G8B which operated in Victoria as the new T class locomotive. It was introduced in 1955 and was the most numerous class of diesel locomotive used in Victoria. This model continued in operation until 1968, although many were modified for continued service. Clyde Model G16C, later superseded by the G26C operated in Victoria as the X class locomotive between 1966 and 1976. Clyde Model 1800HP Model A became the S class locomotives in Victoria. Additional numbers were purchased in preparation for the opening of the standard gauge line between Melbourne and Albury, They entered service between 1957 and 1961. Clyde Mainline Model 2 became the B class in Victoria. The B class were the first mainline diesel-electric locomotives in Victoria entering service in June 1952. They were initially used on the main passenger and freight services, before moving out to other areas. They remained in service until the early 1990s.fiction This collection of Diesel Locomotive Manuals was published by the Clyde Engineeringclyde engineering, diesel locomotives, locomotives victoria

Land sale advertisement for 10 and 20 acre lots from £5 per acre on eight years' terms in Ringwood, with description of local facilities and agricultural features.Subdivision map includes Mullum Mullum Road, Wonga Road, Oban Road and Anderson's Creek Road (later Warrandyte Road). Markings on reverse side indicate the sheet was sent by post from John McEwan & Co., Auctioneers, Land Agents & Business Brokers, 71 Swanston Street, Melbourne, to Mr Allan, Builder, Ringwood, postmarked in JE (June), 1894.