Cog spanner used for maintenance on a sheering hand piece. This particular spanner belong to Maurice Dalton who was the foreman of the show floor of the Dennys Lascelles building until his retirement after 34 years at the company. Maurice used the cog spanner in his work as a wool classer in rural Victoria and New South Wales.Three prong spanner, two prong look like spanners while the third has two small metal prongs extending from flat metal arm edge. Hole is present in the middle where the three prongs meetInscription. Lettering: LISTER

Book was given to Mr Robert 'Bob' Edward Mitchell in 1938. Mr Mitchell trained as a wool classer in the 1930's and was awarded this book as the senior prize. Mr. Mitchell grew up on the Moorabinda sheep property and is on the honour roll as a past student who served in World War II from Wharparilla West State School.Large black bound book containing 12 double-sided pages, each with several wool samples mounted to a blue paper with the name of sheep breed which the wool came from. Each page also has a loose sheet of wax paper over the wool. Book can be closed and secured with a length of black material which can be tied up.

Shears belong to donor's father Maurice Dalton who was foreman of the show floor of the Dennys Lascekkes building until his retirement after 34 years at the building. Maurice used the shears in his work as a wool classer in rural Victoria and New South Wales. The shears are 14" N.1 Combination UTS hand shears made in Sheffield, England.A pair of metal blade shears. The blade is engraved with 'MADE IN ENGLAND / COMBINATION / U.T.S. / SHEFFIELD / N.1'. The ends of the two symmetrical grips loop around on themselves where they are riveted together to form a spring action.Mirrored. Lettering: MADE IN ENGLAND / COMBINATION / UTS / SHEFFIELD / N. 1

Dagging shears belonged to donor's father Maurice Dalton who was foreman of the show floor of the Dennys Lascekkes building until his retirement after 34 years with the company. Maurice used the shears in his work as a wool classer in rural Victoria and New South Wales. The shears are SUCCESS 11" Ball Bros. & Co. Dagging Shear, made in Sheffield, England.A pair of metal blade shears. The blade is engraved with 'SUCCESS / BALL BROS & CO / SHEFFIELD ENGLAND'. The ends of the two symmetrical grips loop around on themselves where they are riveted together to form a spring action.Mirrored. Image: Sword Mirrored. Lettering: SUCCESS / BALL BROS & CO / SHEFFIELD ENGLAND

The book was used by Peter Evans (born 1927) to record notes during classes in the Wool Classing course at Gordon Institute, 1939-1944. Mr Evans was from Hamilton, Victoria, where he continued the family business of wool and sheepskin trading. The book was a gift to Dr Grahame Abbott from the inherited estate of Peter Evans in consideration of his experience in the wool industry over 35 years at the CSIRO Wool Laboratories at Belmont.A bound cash book with a cardboard cover and maroon cotton binding. Has a paper label with a blue inscription in the centre of the front cover. Pages lined and ruled in columns. Contains handwritten notes in blue and red ink on 72 pages.Wording: CASH BOOK D.M.C.;Method: printed;Location: front covergordon institute of technology, woolclassing, evans, mr peter, geelong, victoria

This stencil was used as a wool classification stamp for the transportation of wool bales. Classification stamps like these had to be approved by a Wool Classer and described the quality of wool inside the bale. The top line describes the classed line and breed group – AAA is the main line for any breed group, meaning that the wool is of high quality. FX, MX, SUP and SBK are the breed groups – FX is Fine Crossbreed and MX is Medium Crossbreed, SUP is Superfine Merino and SBK is Comeback.Wool bale export stencil - 56 WOOL AAA FX MX 1st COM WH SUP E CBK56 WOOL AAA FX MX 1st COM WH SUP E CBKwool transportation, wool export, wool class, wool sales

Part of a collection of four photographs depicting wool sales, wool classers and auction rooms. This photograph includes James Campbell Bell, who emigrated from England to Sydney, then Melbourne, in the early 20th century. This photograph was taken by The Argus newspaper and ran with the caption: Opening of the Wool Sales - Australian and overseas woolbuyers busy at their desks at the opening of the 1929-30 Victorian wool-selling season on September 23. the surroundings and atmosphere are characteristic of the Wool Exchange, which is different in many respects from those of the stock exchange.Black and white photograph depicting men in suits, ties and hats seated in an auction room with tiered seating.Back: [printed] Please acknowledge:- / "THE ARGUS," Melbourne, Photo. Back: [handwritten] J Bell / 3rd from right (looking at photo) / White collar + black tie / Melbourne Wool Sale Room 1930wool auction, wool sales, wool industry, james campbell bell, melbourne, victorian wool selling, the argus, wool exchange

Photo depicts the interior of the Strachan, Murray & Shannon Limited wool store in Geelong after a record price was reached for the wool shown. This occurred on 24 November, 1920. This photograph was owned by the donor's father, Mr Cyril Cameron. Mr Cyril Cameron came from the family property 'Burnside' near Glenthompson in the Western District. He joined Strachan & Co. as an office boy in Aug. 1914 and then joined the 8th Battalion, 1st AIF in January 1915. He returned to Australia in early 1920 and started work at Strachan's again. He did the wool classing course (one year, evening?) at the Gordon in 1920-21. He became Head Wool Valuer at Strachan's in 1938 and retired in 1970. His office at Strachan's was on the top floor, directly overlooking what is now the entrance to the National Wool Museum (formerly Dennys Lascelles woolstore). He died in 1983. This photo was originally framed together with a similar photo (3121) and a document detailing the wool sale (3123) under the title "Record Sale 24 November 1920". The two photos focus on lot 372, one looking to the north and the other to the west. These three items may have been a requirement of Mr Cameron's wool classing course.Interior of Strachan, Murray & Shannon Ltd wool store, Nov. 1920.strachan, murray and shannon ltd, cameron, mr cyril

Photo depicts the interior of the Strachan, Murray & Shannon Limited wool store in Geelong after a record price was reached for the wool shown. This occurred on 24 November, 1920. This photograph was owned by the donor's father, Mr Cyril Cameron. Mr Cyril Cameron came from the family property 'Burnside' near Glenthompson in the Western District. He joined Strachan & Co. as an office boy in Aug. 1914 and then joined the 8th Battalion, 1st AIF in January 1915. He returned to Australia in early 1920 and started work at Strachan's again. He did the wool classing course (one year, evening?) at the Gordon in 1920-21. He became Head Wool Valuer at Strachan's in 1938 and retired in 1970. His office at Strachan's was on the top floor, directly overlooking what is now the entrance to the National Wool Museum (formerly Dennys Lascelles woolstore). He died in 1983. This photo was originally framed together with another similar photo (3122) and a document (3123) detailing the wool sale and prices under the title "Record Sale 24 November 1920". The two photos focus on lot 372, one looking to the north and the other to the west. These three items may have been a requirement of Mr Cameron's wool classing course.Interior of Strachan, Murray & Shannon Ltd, Geelong in Nov. 1920....ORLAME / ... 7 1/2Dstrachan, murray and shannon ltd, cameron, mr cyril

This was a School of Mines Ballarat tie. The School of Mines was established in 1870, making it Australia's third oldest tertiary institution. The School of Mines had two divisions - a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying. The organisation remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. These three green polyester ties have a small SMB crest set within two gold diagonal pin stripes (5cm apart) in the middle of the wider front and one on the narrower end. (Men's polyester tie made In Australia under licence By Hollygreen) On a label tag at the back - Hollygreen, 100% polyester, Dry clean only, Made in Australiasmb, school of mines ballarat, school tie, costume, textiles, uniform

This tie pin was made for the School on Mines Ballarat. The School of Mines was established in 1870, making it Australia's third oldest tertiary institution. The School of Mines had two divisions - a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying. The organisation remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976.This small pin of green enamel on gold coloured metal with the letters SMB has a with butterfly catch at the back. It is pinned to a black card with white printing which contains information about the School of Mines Ballarat.Printed on the card - The School of Mines Ballarat was established on 26th October, 1870 to provide for the educational and training needs of the gold mining industry. Today, SMB as a Community College of Technical and Further Education offers vocational, preparatory and enrichment courses for the local community and the Central Highlands Region.smb, school of mines ballarat, tie pin

These tie pins were made for the School on Mines Ballarat. The School of Mines was established in 1870, making it Australia's third oldest tertiary institution. The School of Mines had two divisions - a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying. The organisation remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976.There are 5 small pins of green enamel on gold coloured metal with the letters SMB which have a with butterfly catch at the back. They are pinned to a buff coloured card with brown printing which contains information about the School of Mines Ballarat.Printed on the card - The School of Mines Ballarat was established on 26th October, 1870 to provide for the educational and training needs of the gold mining industry. Today, SMB as a Community College of Technical and Further Education offers vocational, preparatory and enrichment courses for the local community and the Central Highlands Region.smb, school of mines ballarat, tie pin

Hand shears needed to be very sharp and often had a leather strap or ‘driver’ which passed over the hand. Others had sheepskin bound around the grip. Blades had to be regularly sharpened on a grinding stone. Most hand shears were made in Sheffield, England, with various models produced offering wide or narrow blades, sharp or rounded points, and various grips and bows. The technique of Australian hand shearing gradually developed from the 1830s using the old English method of cutting the flank with hand shears in a series of circular cuts from the sheep’s neck to the tail. In the early 1930s the Ballarat School of Mines introduced a wide-ranging Wool Classing Course as jobs were in extremely short supply during the Great Depression. Metal handshears used for shearing sheep.ballarat school of mines, shearing, woolclassing, sheep

This card is the fourth in a set of 16 information cards produced by the Stamina Clothing Company re: Australian Woollen Mills as give aways. It looks the process of wool sorting and classing.Card no. 4 from the Crusader Mills information card set, c.1945-55. Verso of card no. 4 from the Crusader Mills information card set, c.1945-55.No. 4 Wool Sorting at the Crusader Mills.woolclassing, australian woollen mills pty ltd stamina clothing company

Augustus Bostock was the 9th child of Robert & Rachael Bostock of Vaucluse Epping Forest, Van Diemen’s Land. He was only 4 years old when his mother died. He was inspired by his father to seek his fortune in the Western District of Victoria. He arrived around 1850. He married Margaret Aitkin in July 1865. Augustus owned several properties in the district and leased others. He sat on the court of Warrnambool, Mortlake or Hexham as required. He resided at Marramook in Hawkesdale and later moved to Vaucluse in Hopetoun Road Warrnambool, where he died in 1920 at the age of 87. This letter relates to crossing sheep and answers three questions posed by Mr. E Plumridge in relation to the breeding of comeback sheep. E Plumridge is mentioned on Trove as holding classes in wool classing at Gordon technical College at Geelong. This is one of a number of documents which relate to the Bostock family who were one of the most important pioneering families of the Western District. They owned and leased various properties around Warrnambool and were involved in many aspects of social and business life. This letter reflects the knowledge and experience of Augustus Bostock in the breeding of sheep and also his willingness to share this knowledge. It therefore has social and historical significance.Cream lined paper with wide margin on left hand side. One page written in black ink.Addressed from Marramook 16th Jan 1905 to Mr. E Plumridge of Marshalltown. Signed Augustus Bostock.augustus bostock, plumridge geelong, marramook, warrnambool

Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University AustraliaThis woven band of dark blue has two narrow bands of gold on either side. It has a 4cm turn back at the end, which is held by a folded and stitched piece of the same band placed at ninety degrees around the band. school of mines ballarat, hat band, uniform, costume, textiles

Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University AustraliaThese circular cuff links are the Coat of Arms of the School of Mines Ballarat and are made of sterling silver and white, yellow, green and blue enamel attached by three links to a small bar with dumb bells. On face - Ingenio Effodere Opesschool of mines ballarat, school crest, cuff links

Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University AustraliaThese Coat of Arms of the School of Mines Ballarat are circular lapel badges and are made of sterling silver and enamel. The circular disc is attached to a long pin. 1). The enamel is yellow, green and blue 2). The enamel is white, yellow, green and blueOn face - Ingenio Effodere Opesschool of mines ballarat, school crest, lapel pins

Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University Australia. Gold coloured School of Mines Ballarat brass badges with blue and green enameling. Box of 72 (8 are loose in the box but 64 are in individual packets).On face - Ballarat School of Mines, Ingenio Effodere Opes Stamped into back - Stokes Melbballarat school of mines, badge, stokes and sons, numismatics

This photograph shows the removal of the mansard roof from the Dennys Lascelles wool store (cnr Moorabool and Brougham Streets; now the National Wool Museum). This photo was taken by Mr Cyril Cameron (known as 'Cam'), the father of the donor of this item. Mr Cyril Cameron came from the family property 'Burnside' near Glenthompson in the Western District. He joined Strachan & Co. as an office boy in Aug. 1914 and then joined the 8th Battalion, 1st AIF in January 1915. He returned to Australia in early 1920 and started work at Strachan's again. He did the wool classing course (one year, evening?) at the Gordon in 1920-21. He became Head Wool Valuer at Strachan's in 1938 and retired in 1970. His office at Strachan's was on the top floor, directly overlooking what is now the entrance to the National Wool Museum (formerly Dennys Lascelles woolstore). He died in 1983. Mr Cameron took this photo from his office in Strachan's. The date written on the back of the photo (1932) is in Mr Cameron's handwriting.Photograph, showing the mansard roof being removed from the Dennys Lascelles wool store, Geelong, 1932.Dennys Lascelles / Geelong / Wrecking tower / 1932strachan, murray and shannon ltd dennys, lascelles limited, cameron, mr cyril

The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University. Green woollen, mostly unlined (apart from the upper back and sleeves) blazer with embroidered emblem on breast pocket. The edges are bound including the three pockets and the sleeve cuff 9 cm from the edge. There are three green buttons at the front. The internal edges are overlocked and there is a panel stitched to the inside where the top of the side pockets are stitched. Embroidered patch on breast pocket.ballarat school of mines, blazer, coat of arms, costume, textiles

The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University. Green woollen, unlined blazer with embroidered emblem on breast pocket. The edges are bound including the three pockets and the sleeve cuff 9 cm from the edge. There are three green buttons at the front. The internal edges are bound and there is tape stitched to the inside where the top of the side and breast pockets are stitched. Embroidered patch on breast pocket. Makers woven tags.ballarat school of mines, blazer, coat of arms, school uniform, costume, textiles

The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University.Bottle green, size 18 poly cotton machine knit windcheater with yellow SMB name. It has knit rib fabric at the bottom, neck and cuffs.Printed in yellow - SMB, logo and School of Mines and Industries Ballaratwindcheater, costume, uniform, textiles

This badge was used by Hester Clara Darby, teacher at the Ballarat School of Mines. Hester joined the staff of SMB as an assistant to senior Commercial classes in April 1916. On 01 February 1921 she was appointed a lecturer in Commercial Correspondence and Office Routine. She taught the 'Touch' Method of typing, Commercial Correspondence, Shorthand and Office Routine. Tertiary education at Ballarat began with the establishment of the School of Mines in 1870, making it Australia's third oldest tertiary institution. Classes began in surveying, mathematics, chemistry and a decade later they included metallurgy, assaying and geology. The technical division provided such programs as wool classing, plumbing and bricklaying. In 1967, it was split into three separate institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. Then in 1976 the Ballarat Institute of Advanced Education became into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School became the School of Mines and Industries, Ballarat (SMB). In 1998, the Ballarat School of Mines and Industries and the Horsham-based Wimmera Institute of TAFE merged with the University of Ballarat. The university merged with Monash University's Gippsland (Churchill) campus in 2013 and the merged schools are now the Federation University AustralialBallarat School of Mines Badge made of gold coloured metal with blue and green enamel.On face - Ballarat School of Mines, Ingenio Effodere Opesballarat school of mines badge, badge, coat of arms, hester clara darby, hester darby

Graham Willey was a School of Mines Ballarat student from 1953-55. He was awarded the 1955 Honour Blazer. The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University.This three quarter lined, 3 buttoned, bottle green woolen blazer is edged in black twill piping and has a SMB badge on pocket "XVII ATH. XI Honor 1955 S.R.C." The 2 side pockets are also edged in the black twill and there is a trim of the twill 8.3cm from the sleeve cuff. The breast pocket has a top binding of yellow and green diagonal stripes. Cloth label - Messer & Opie Ballarat On embroidered badge "Incenio Effodore Opes", "XVII ATH XI Honor 1955 S.R.C."blazer, honor blazer, harold john hassell, smb, school of mines ballarat, graham willey, costume, textiles, coat of arms

In 1940 Harold John Hassell was a 4th year student in the Science school. He won the Mica Smith Trust Fund (open championship) and was awarded the 1940 Honour Blazer. The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University.This three buttoned, bottle green woolen blazer is edged in black twill piping and has a Ballarat School of Mines coat of arms on pocket "Honor 1940 ATHS - XVIII. The two side pockets are also edged in the black twill and there is a trim of the twill 8.3cm from the sleeve cuff. The breast pocket has a top binding of yellow and blue stripes. The seams are hand stitched down to prevent fraying and there are tapes hand sewn on the inside across the back of the pockets to prevent tearing. Cloth label - Mark & Philp Pty Ltd On embroidered badge "Incenio Effodore Opes", Honor 1940 ATHS - XVIII"blazer, honor blazer, harold john hassell, smb, school of mines ballarat, costume, textiles, uniform, embroidery

In 1947 Percy Everett, Chief Architect for the Victorian Government, drew up plans to accomodate the growth in student numbers on the Ballarat School of Mines site. It was an era of government buildings surrounding the Ballarat School of Mines campus either being transfered to the school or foreshadowed for transfer. In 1947 two Red Cross huts were transferred from Victoria Park to the western side of the former Ballarat Supreme Court (later Courthouse Theatre) for use by Wool Classing and Motor Mechanics. In the same year additional facilities were provided for Pottery due to the increase in enrolments and a large brick classroom was built at the rear of the Ballarat Junior Technical School Building. In the annual report of 1947 the President said: "These transfers are, however, only temporary expedients and indicate the pressing need for more buildings of a permanent nature". By the end of the year the School Council decided to request the Education Department of Victoria to proceed with the implementation of the School's long-range plan whch had received approval earlier and to treat it as an urgent post-war requirement. After much communication a plan for a six-storied building, flanked by two three storied buildings was planned to be built on the site of the Ballarat Gaol was developed. The plan was sent to the Education Department for the Minister's Approval. It is not know if approval was granted, but the building did not proceed, possibly becausse the Ballarat Gaol was still very miuch in use. When a tertiary division of the Ballarat School of Mines was being developed in 1967 it corresponded with the closure of the Ballarat Gaol. It was determined that the Lydiard Street South site had no room for future growth so a new campus was sought. The new campus was purchased at Mt Helen, and was initially known as the Ballarat Insittute of Advanced Education. In 1976, when the Ballarat Teachers' College merged into the structure, the campus became known as the Ballarat College of Advanced Education and it was no longer a part of the Ballarat School of Mines. Plans for a proposed building to replace the Ballarat Gaol buildings. The proposed building was never built, the concept being replaced by a new teritary facility at Mt Helen. buildings, percy everett, ballarat school of mines battery, ballarat technical art school, engineering workshops, machine shop, ballarat junior technical school, architectural plans, ballarat school of mines, smb campus

Male wool shirt made in Bradford, U.K. The shirt is cut from first fabric woven from 100% traceable Australian wool. Bradford Mills differ to Australian mills in that the entire process of producing worsted material does not take place at the one firm/factory. Rather it is split between many firm/factories specialising in their task in the production of worsted material. For example, the wool goes from merchants to combers to produce tops, the tops to spinners to produce yarn and then the yarn is sold to manufactures who weave it into cloth. After the weaving is done the cloth has to be sent to the dryers and finishers, who scour, dye and finish the cloth. Finally, the finished cloth is purchase by a fresh set of merchants, who will later sell the cloth elsewhere in England or abroad. At each these steps a new firm is handling the wool/cloth making it hard to track lineage of wool through this process and hence hard to guarantee 100% Australian wool. This shirt was purchased and worn by the donor’s husband, George H. Gerber, an Australian Wool Buyer. The shirt was purchased on one of George’s trips to Bradford in the U.K. on company business. Gerber was a second-generation Wool Traders in his family. His father, also named George H. Gerber, worked for Kreglinger & Furneau. He worked for them in Boston, U.S.A. before he died from the Spanish Flu in 1918. The company then promised a job to his oldest son (donor’s husband) once he finished school. Thus, George came to be trained as a Fine Wool Classer by Kreglinger & Furneaux (Aust.) Pty Ltd where he was employed as a Wool Buyer all his working life. He retired in 1969 as the head of their Australian office when the company was taken over Also of note, the shirt was sold with 2 add-on collars. Having additional collars was advantageous as changing only the collar increased the number of days the shirt could be worn without washing. Cream coloured shirt with black and red single thread verticle stripes.“Grandpa” collar (with 1 of its 2 supplied add-on collars included). French cuffs. Sold with 2 add-on collars, hence both ends of the collar have buttonholes to take a stud, and a partially-opened button-hole is at the centre of the neck on the outside of the collar for a second stud.Letering label on shirt: GENT’S OUTFITTER Herbert Winfield 23 CHEAPSIDE, BRADFORDbradford, u.k, kreglinger & furneaux (aust.) pty ltd, 100% australian wool

Ford and McFarlane shearing handpiece c.1890. This shearing handpiece is from ‘Wellington Lodge” in Tailem Bend, South Australia. Wellington Lodge today is an Angus beef farm; however, the property has a long history which includes wool farming. Wellington Lodge has been in the McFarlane family since the 1840’s and was originally around 19000 acres. The donor, Brian Licence, assembled this handpiece out of spare parts he found while classing wool on the property in the 1960s. Brian showed the finished handpiece to the owners once his classing work was completed and was told he could keep the handpiece as a souvenir. Brian also classed wool at “Jockwar” and “Pleasant Park” in Penola for members of the McFarlane family during the 1960s. The handpiece is named after Ford, the name of the engineer who designed the handpiece and McFarlane, the owners of Wellington Lodge Station and employers of Ford. This handpiece was developed as a prototype for use on the property. The handpiece which is made of solid brass is in a “used condition” and has been patched with solder. The handpiece is stamped with the number 10. Internally, the handpiece is powered from a drive mechanism of compressed air, this compressed air was typically produced by burning mutton fat. The handpiece comes from the pre-electrical– steam engine era of shearing. Brass metal shearing handpiece. A three-pronged fitting to hold both the comb and the blade protrudes from one end. A cylindrical stem extends vertically from the other. This is likely where a connecting rod to the shearing plant would be found. Below this vertical stem, the handpiece has an additional threaded hose fitting. This is likely where compressed air was delivered into the handpiece. The inscriptions can be found on the rear, near the previously mentioned vertical stem. Around this stem is also where the repairs of solder can be found. These repairs are unique to this handpiece and are not common practise.Etched. Base of handle. “FORD & McFARLANE . SHEEP SHEARER . Etched. Base of handle. “10”sheep shearing, shearing equipment, ford & mcfarlane, wellington lodge, tailem bend, south australia, shearing handpiece, shearing

This photograph shows Growers Ian Appledore, Kaye Appledore and Murray Appledore, Wool Manager Keith Jackson, Wool Classer Phillip Gibson, Geoff Allibon and Brendan Dart posing with the million dollar bale after it was sold on 11th January 1995 in Geelong. The wool was shorn from sheep of the Wyndarra and Rockbank bloodlines. A flock of 290 sheep were kept undercover at Kadinia, the property of the Appledore family from Brim in the Wimmera district of Victoria. Their record-breaking wool was produced by giving the sheep a special diet and providing each one with a UV-protective coat. Around 180 fleeces were selected for the million dollar bale. The sale of the first bale of wool measuring below 14 microns was held in the Auction Room here at the National Wool Museum. Bidding began at 40,000 (cents a kilogram) and steadily increased until there were only two bidders left. The bidders represented the Japanese firm Aoki International and Loro Piana of Italy. The hammer fell at 1,030,000 cents per kilogram, with Aoki International paying $1,194,800 for the 116kg bale. The fleece was scoured (cleaned) at the Goulburn Wool Scour, New South Wales. The degree of preparation and care taken with the task was extreme. The Scour closed production three days before and was extensively cleaned. On the day of scouring 12 tonnes of 17 micron wool was washed to condition the water, then nine bales of extra super fine wool, worth over $300,000 was washed as a trial run. Toabo Agaki Japan was employed to process the scoured wool into suit cloth. Taobo required the scoured wool to contain 0.5% residual grease, 12% moisture and a yield of 83kg. These requirements were met. The entire staff of the Scour wanted to be part of washing the best wool in the world. Without asking for payment both the night shift and afternoon shift crews assisted the day shift in the task. The bale was fed into the scour in seven minutes and fitted into three bowls, half the scour. It completely disappeared into the dryer and the last wool was fed before the first wool was out. The clean wool was hand-packed into cardboard cartons and freighted to Japan. Aoki International, based in Yokohama Japan, cut three suit lengths from the cloth, then blended the remaining wool into an exclusive line of commercially-available suits. These suits are labelled Kadinia.Colour photograph showing three six men and one woman standing around a bale of wool.michael crooks, auctioneer, wool industry, million dollar bale, geelong, auction, kadinia, appledore, keith jackson, sale room, geelong wool centre