Showing 1886 items
matching mining equipment or methods
-
Melbourne Tram MuseumDocument, Melbourne & Metropolitan Tramways Board (MMTB), Decimal Currency, 1965
Set of three notices regarding the introduction of Decimal Currency that took place on 14/2/1966 1 - Notice No. 3 dated 6/9/1965 regarding how revenue pay-in would be made and coins counted. Has a sample pay-in form showing the methods. Notes the training to be provided. 2 - Notice No. 4 dated 16/9/1965 - in a question and answer format about the conversion from imperial to decimal currency. 3 - Notice No. 5 dated 31/10/1965 - training using plastic model coins and conversions.Yields information about the conversion from imperial to decimal currency and the training undertaken for this.Document - Set of three notices foolscap, each with two punched holes on left side.Some have numbers in the top left hand corner in ink.tramways, instructions, operations, conductors, decimal conversion, decimal currency, training -
Ballarat Tramway MuseumDocument - Photocopy, State Electricity Commission of Victoria (SECV), "Official Time Table Geelong No. 47", March 1953
Photocopy of the March 1953 SEC Geelong Timetable, giving details of the fares, transfers, luggage or parcels, lost property, times of each tram on the Newtown, West Geelong, East Geelong, Chilwell, Eastern Park, Belmont and North lines. Has adverts for M F Knell chiropodist, Henwood and Dancey Printers, photos of the Captain and Coach and Secretary of the Geelong Football Club, a list of Premiership records, goals and Brownlow Medals. Note: Sheets are not in the same order as the printed versions due to the photocopying method. See items 5357 and 5629 and 9821 for other versions. Yields information about the operation of the Geelong tramway system.Photocopy - 17 A4 sheets of the "Official Time Table Geelong No. 47" published March 1953tramways, trams, geelong, football, timetable, operations -
Geoffrey Kaye Museum of Anaesthetic HistoryEquipment - Stopcock, Hewitt, George Barth & Co. Ltd, c. 1895
When Hewitt introduced his regulating stopcock in 1887, attempts were made to dilute the nitrous oxide with air and so obviate the element of asphyxiation. The method was to be seen in London, mainly in dentistry and minor surgery, so late as 1930. It was not very successful. To give even 10% of oxygen (which is not enough) the gas-mixture must contain 55% of air and 45% of nitrous oxide. The latter is thus so diluted by atmospheric nitrogen as to be incapable of producing anaesthesia except by asphyxiation. "Gas-air" was confined to analgesia, for example in midwifery. (Source: Penn catalogue)Brown leather facemask attached to metal inhaler and stopcock device that has been sectioned to reveal its inner workings. The various exposed channels have been painted either green, red, blue or purple.Engraved into side of stopcock: HEWITT'S / N20-02 / 1895 / G. Kaye sect. 1952. •Stamped into other side of stopcock: [indecipherable] BARTH & CO. / SOLE MAKERS / 54. POLAND STREET LONDON.W.frederic hewitt, stopcock, nitrous oxide, oxygen, gas-air -
Federation University Historical CollectionPhotograph - Image, Yarrowee Hall, Redan, c1883
... with the latest mining equipment, as well as beginning a lifelong interest... of the sale he set himself up with the latest mining equipment ...ROBERT MALACHY SERJEANT (1828-1902) Robert Malachy Serjeant was born on 21 December 1828 at Callington, Cornwall. He was the son of Philip Davey Serjeant, a surgeon in the Royal Marines, and Eliza Malachy. Philip Serjeant died in 1834. His mother, Eliza, remarried John Burgh in 1836. He died in 1837. In September 1848 Eliza, Robert and his two sisters, Caroline and Susan, departed Plymouth on the William Moneya for Port Adelaide and arrived in January 1849. Once gold was discovered in Victoria, Serjeant made his way to Forest Creek (near Castlemaine) and he and his mate Mr Victor, were the first party to sink through the basalt in search of a deep lead. In 1854 he moved to Ballarat to work as a miner and enjoyed some success. In 1855 he was with a group that discovered a 500 ounce nugget. With his share of the sale he set himself up with the latest mining equipment, as well as beginning a lifelong interest in the share market. He became the Manager of the Chryseis, Isis and Garibaldi claims and then the Manager of the Band and Albion Consol Company. He held the position for thirty years and only resigned when the company amalgamated with the Sir Henry Loch Mine. Robert Malachy Serjeant became interested in Politics. The first election for Parliament Representatives for Ballarat was in 1855. Robert stood for election for the first time in 1859, representing Ballarat West. He was also elected to represent Ballarat West in 1874 and 1880. Robert Serjeant’s community involvement extended to Education. Years of discussion eventually saw the development of the Ballarat School of Mines, the first school of mines in Australia. The inaugural School Council was formed in 1870 with Sir Redmond Barry, the Chief Justice, as President and Robert Malachy Serjeant as a member of the council. He held a position on the council until illness forced him to retire in 1889. He was elected a Life Governor in 1889. He was also a Life Governor of the Ballarat Hospital. Robert Serjeant showed Prince Albert and Prince George (later King George V) around the Band and Albion Mine. At the age of 42, Robert enrolled as a student at the School of Mines in 1871. He obtained a Certificate of Competency in Assaying (including Metallurgy) in 1875. The first certificate in “Geology as Applied to Mining” was awarded to Robert Serjeant in 1876. Robert Serjeant was an active and generous supporter of the School of Mines. As well as being a financial contributor, he lectured and examined in the Principles and Practice of Mining. He was regarded as an authority on alluvial and quartz mining and was a member of the Ballarat Local Court and mining board. In 1977 Robert, Joseph Flude and Henry Caselli donated the patent rights of a novel Pyrites furnace to the school. The R.M. Serjeant Scholarship at the Ballarat School of Mines resulted after a reward was offered for the first to produce the best method of treating auriferous ores – other than the smelting method. The offer was open for two years but not awarded. The money for this was donated by Robert Serjeant to the amount of 256 Pounds. It was then used to fund the School of Mines Scholarship in Engineering (1889). It was first awarded in 1922. Robert Malachy Serjeant died on 25 October 1902 and was buried at the Ballaarat Old Cemetery. (Sometimes Malachy is incorrectly written as Malachi)An copy of a photo of Yarrowee Hall, the home of of mine manager Robert Malachy Serjeant. robert malachy serjeant, r.m. sergeant, robert malachi serjeant, band of hope and albion consols, yarrowee hall, redan -
Victorian Aboriginal Corporation for Languages
Book, Robert Brough Smyth, The Aborigines of Victoria : with notes relating to the habits of the natives of other parts of Australia and Tasmania : compiled from various sources for the Government of Victoria by R. Brough Smyth : vol. 1, 1878
Produced in two large volumes, Robert Brough Smyth has collected information on various tribes and their customs, as well as their physical and mental character; birth and education of children; marriage; death and burial of the dead; daily lives of the natives; food; diseases; dress and personal ornaments; weapons; implements and manufacturers; nets and fish hooks; methods of producing fire; canoes and myths. Smyth also devotes about two hundred pages to Aboriginal languages, as well as including details and customs of the aborigines in Tasmania. Complete with hundreds of sketches, the work is still a valuable resource not only for those with in an interest in aboriginal culture, but also those wanting to know the early history of Australia.maps, b&w illustrations, word listsrobert brough smyth, anthropology, aboriginal social life and customs, children, behaviour, death and burial customs, daily life, food, diseases, weapons, shields, boomerang, vessels, baskets, message sticks, stone tool technology, fire, canoes, myths, stories -
Victorian Aboriginal Corporation for Languages
Book, Robert Brough Smyth, The Aborigines of Victoria : with notes relating to the habits of the natives of other parts of Australia and Tasmania : compiled from various sources for the Government of Victoria by R. Brough Smyth : vol. 2, 1878
Produced in two large volumes, Robert Brough Smyth has collected information on various tribes and their customs, as well as their physical and mental character; birth and education of children; marriage; death and burial of the dead; daily lives of the natives; food; diseases; dress and personal ornaments; weapons; implements and manufacturers; nets and fish hooks; methods of producing fire; canoes and myths. Smyth also devotes about two hundred pages to Aboriginal languages, as well as including details and customs of the aborigines in Tasmania. Complete with hundreds of sketches, the work is still a valuable resource not only for those with in an interest in aboriginal culture, but also those wanting to know the early history of Australia.b&w illustrations, word listsrobert brough smyth, philip chauncy, william ridley, albert le souef, a. w. howitt, john moore davis, william locke, a. f. a. greeves, language comparisons, phrenology, aboriginal social life and customs, death and burial customs, weapons, tasmania, lake tyers, lake wellington, gippsland, ballarat, brabrolong, lake hindmarsh, kotoopna -
Ballarat Tramway MuseumDocument - Roster, State Electricity Commission of Victoria (SECV), "Rotation Roster S.134 14/9/70", 14/09/1970 12:00:00 AM
Significant in being a roster rotation sheet that was reissued following corrections to the previous one. Shows how the crews were organised in relation to their work and total times worked. 2nd copy of original added.Single sheet of off white duplicating paper titled "Rotation Roster S.134 14/9/70". Printed by wax cut stencil or Gestetner method. Details the run number that an employee would do for a particular week and day of the week and the total hours mins worked that week. Was part of D. J. Everett papers. See also Reg. Item 2293 for 3/70 version of this document. See Reg Item 3460 for the 25/8/1970 version and showing marked changes between the sheets. Additional copy with handwritten notes added 9/1/2007 Copy 3 added 2/8/2012.Handwritten notes with a motor vehicle registrations, two sets of names and address and a chemist names and other names and telephone numbers written on the sheet.trams, tramways, ballarat, rosters, employees, shifts -
Ballarat Tramway MuseumDocument - Roster, State Electricity Commission of Victoria (SECV), "Rotation Roster S.134/R.1 25/8/70", 25/08/1970 12:00:00 AM
Significant in being a roster rotation sheet that was corrected and reissued a short time later. Shows how the crews were organised in relation to their work and total times worked.Single sheet of off white duplicating paper titled "Rotation Roster S.134/ R.1 25/8/70". Printed by wax cut stencil or Gestetner method. Details the run number that an employee would do for a particular week and day of the week and the total hours mins worked that week. Has a number of pin hole in the corners and centrally showing that it was used on a board. Has minor changes in ink at the bottom of the sheet that lead to Reg item 2294. See also Reg. Item 2293 for 3/70 version of this document. See Reg Item 2294 for the 14-9-1970 version following changes as shown on this sheet in ink.trams, tramways, ballarat, rosters, employees, shifts -
Melbourne Tram MuseumDocument - Radio Transcript, Mr Cameron, Wireless talk - Presented by The Chairman, Mr Cameron, early 1926
Radio Transcript - 11 Foolscap pages, undated, given a reference to the connection of the Commercial Road tram line following conversion of St Kilda Road cable tram lines - early 1926. Presented by The Chairman, Mr Cameron, giving a short history of trams in Melbourne, formation of the Board, lists other Board members, the General Scheme, Railway electrification, public transport in Melbourne, William St extension, replacement of the cable trams, methods of conversion, reference to the Tramway Trusts, Mr. Strickland, Mr. Murdoch, W. Strangward, tramcars, speed of trams, use of buses and finally fares. Has a reference to the forthcoming conversion of the Commercial Road and Malvern Road cable tramsHas green pencil in top left hand corner "Chair"trams, tramways, public transport, radio stations, cable trams, conversion, general scheme, personnel -
Melbourne Tram MuseumMagazine, Traction Publications, "Transit Australia - May 1996", May. 1996
Magazine - 28 pages - "Transit Australia - May 1996", celebrating 50 years of publication with gold cover and some gold printing inside. Has an article on the history of Transit Australia, commencing with Tram Tracks in 1946, Electric Traction and then to Transit Australia. Lists the various editors, publishing methods and other key changes. Has features on the way we have changed (historical photographs), Sydney City Rail timetable review, Adelaide bus contracts, Gold Coast railway, Melbourne Grand Prix and news items from around Australia. Scanned pdf copy of cover and article on the Grand Prix added 28/9/17trams, tramways, tramways, 50th anniversary, transit australia, grand prix -
Bendigo Historical Society Inc.Document - IAN DYETT COLLECTION: AUCTION CATALOGUE - CHAPMAN'S GOLD MINE
... of the Liquidator, Mr. D. R. S. McGregor. For sale was Mining Machinery.... For sale was Mining Machinery, Plant, Equipment, Tools,Corrugated ...Darkish blue catalogue for an auction sale at the Chapmans Gold Mine N. L. at Chewton, Vic. On 8 February, 1939 by Order of the Liquidator, Mr. D. R. S. McGregor. For sale was Mining Machinery, Plant, Equipment, Tools,Corrugated Iron Housing and Buildings. J. H. Curnow & Son were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - chapmans gold mine n. l., d r s mcgregor, j h curnow & son, old quartz hill mine, albion hotel (near chewton), roberts & son, the cambridge press -
Kiewa Valley Historical SocietySaddle Horse Stock, Circa 1950
This stock horse saddle was probably used in the mid 1900's. This was the period when cattle mustering was at its prime. The movement of cattle was by mounted stock horse only and not by other methods. Northern territory cattle stations in the late 1900's started to use helicopters for "cattle control". In the KIEWA Valley/Bogong High Plains and other rural cattle producing areas required well trained stock horses and stockmen for cattle control. It is only in the later 1900's that motor bikes and four wheeled quad-bikes have taken over, in part, from the mounted stockman.This horse saddle is very significant to the Kiewa Valley because of the early introduction of cattle stations in what initially was regarded as a semi remote location. The maintenance of cattle in the Kiewa Valley is and was an important requirement. A good stock horse saddle as and is important, especially during the period when cattle were grazed on the Bogong High Plains. The mustering and and moving cattle from the valley pastures to the high country was a demanding and dangerous exercise requiring "sure footed" stock horses.The "good" saddle was a vital part of this cattle mustering. A scientific study started in 1947 to study the impact of grazing cattle on the natural Alpine and sub Alpine vegetation found grazing cattle had an adverse affect on the natural Alpine and sub alpine vegetation, and grazing on the plains was stopped by the Victorian Government in 2005.This "camp draft" in the High Plains could take up to six weeks.This all leather "stock horse" saddle shows plenty of wear. It is in "full harness" configaration with stirrups and leg protectors horse, country, leather, gaiters, high, grazing, cattlemen, laces, studs -
Federation University Historical Collection
Magazine - Booklet, Baxter & Stubbs, Print, Ballarat School of Mines Students' Magazine, 1923, 1923
Editorial, In Memoriam: Robert James Dowling, Fumes from the Lab, A trip to America, Arts & Crafts Gossip, Echoes of the Past, Sport, The Junior Techs. Under Arts & Crafts Gossip the writer gives on overview on 'modern books on fine art'. "... In making this decision as to whether his tone values are correct or not the artist always studies his canvas from a distance of several yards. An excellent system of painting is being practised and taught by Max Meldrum. This consists of painting in the orders of the impressions. This method is fully explained in his book, and will be found invaluable by the student desiring to work on sound lines. ...Brown soft covered magazine..1) Stamped "Ballarat Technical Art School" .2) Written on front cover "Hessie Darby"ballarat school of mines, magazine, hessie darby, ballarat technical art school, e. kift, ethel kift, r. t. crosthwaite, c. mcilvena, h. finlayson, e. mckissock, f. russell, c. s. hunt, j. r. pound, a. leask, m. timmings, professor alfred mica smith, robert james dowling, e. j. mcconnon, r. g. cox, edwin a. brophy, raymond fricke, nancy humphries, r. sage, max meldrum -
Wodonga & District Historical Society IncFunctional object - Flower press, c1900
The preservation of plants and flowers for both decorative and scientific purposes dates back to ancient times. Drying and pressing flowers became a popular hobby and preservation method in Victorian England. The flower press was readily available to buy or simple and inexpensive to create. This flower press was marketed through Henry Buck Pty. Ltd. in Melbourne, Victoria. Henry Buck migrated from England and established his store in Melbourne in 1890. The business dealt primarily in menswear, but also had other domestic lines. The business, trading as Henry Bucks, still operates in Melbourne and several other locations.This item is representative of a popular hobby of the Victorian era.A flower press made from timber with metal clasps and screws. The front is decorated with a parquetry flower design. There are 2 metal strips screwed onto the timber horizontally. These are secured by wing screws which can be adjusted to hold the back and front together. They allow pressure to be adjusted depending on what item is being compressed.Label on back: Left hand side around red shape with HB in the centre "THE SIGN OF/ EXCELLENCE" On right hand side: "LONDON/ Henry Buck PTY LTD. / MELBOURNE"flower drying, victorian era hobbies, henry buck pty. ltd. -
Bendigo Military MuseumManual - National Research Council of Canada, Division of Applied Physics - Strip triangulation of measured points, National Research Council of Canada, Nov 1961, Dec 1966, Oct 1966, Jan 1967
The Royal Australian Survey Corps, Army Survey Regiment used transformations of Aerial Photographic strip and block coordinates to accurately calculate setup parameters for the extraction of topographical features on Wild B8 stereo plotters. This manual describes the methods and "Fortran" computer programming language solutions. Chapter 1 - Transformation and adjustment of strip coordinates by electronic computation. Chapter 2 - An Introduction to Analytical Strip Triangulation with a "Fortran" program. Chapter 3 - A "Fortran" program for the adjustment of Strips and Blocks by Polynomial Transformations. Chapter 4 - A modified "Fortran" (IBM 1620) program for the adjustments of Strip coordinates.Hard Covered Manual containing Chapter 1 - 8 x pages, Chapter 2 - 84 x pages, Chapter 3 - 33 x pages, Chapter 4 - 29 x pages.Distribution stamps and labels on front cover.royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt -
Flagstaff Hill Maritime Museum and VillageDomestic object - Hair Tongs, Marcel Grateau, 1900 +
Marcelling is a hair styling technique in which hot curling tongs are used to induce a curl into the hair. Its appearance was similar to that of a finger wave but it is created using a different method. Marcelled hair was a popular style for women's hair in the 1920s and 30s often in conjunction with a bob cut. For those women who had long hair, it was common to tie the hair at the nape of the neck and pin it above the ear with a stylish hairpin or flower. Accounts vary about the invention of the style, but Marcel Grateau (1852–1936) is widely credited with inventing the hair styling technique in the 1870s. He started with a small salon in Montmartre, Paris where his clients were the poorer classes. As he developed the waving method that would later become the Marcel wave, using heated curling irons, The inventor and stylist emigrated to the United States and changed his name to François Marcel Woelfflé, sometimes reported as François Marcel. He was granted U.S. patents for implements for performing the technique; the first, U.S. patent 806386, entitled "Curling-Iron", was published in 1905, and the second, entitled "Hair-Waving Iron", for an electric version, under the name François Marcel, was published in 1918. His obituary appeared under the name Francois Marcel Grateau in 1936. Originally the irons had to be heated in the fire, but hair easily got burnt until 1924 when electric irons were invented and the temperature could be regulated. A significant item that gives us a snapshot not only into women's hairstyles of the 1920s and 1930s but a look into the social norms of that era. Therefore the item is of social interest in regards to the story it tells and the development of women's fashion in hair styling.Marcel Tongs, metal, used to impart a hair wave by heating and crimping the hairNoneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, tongs, curling tongs, hairdressing -
Flagstaff Hill Maritime Museum and VillageContainer - Round Metal Shaker
The history of metal packaging began in Bohemia in the 1200s. Metal has been produced for a very long time. But the first metal used for packaging was tin. In particular, it was the process of tin plating that was invented in Bohemia. Before this no other metal was economically able to be used for packaging. Later, in 1667 Andrew Yarranton, and English engineer, and Ambrose Crowley brought the method to England. Here it was improved by ironmasters including Philip Foley. Then by 1697, John Hanbury had a rolling mill at Pontypool in South Wales. The method they developed involved rolling iron plates using cylinders. This process enabled more uniform blank plates to be produced than was possible by just hammering the tin. https://www.shilohplastics.com.au/history-of-metal-packaging/ Fuller's Earth is any clay material that has the capability to bleach or dissolve oil or other liquids without the use of harsh chemical treatment. Modern uses of Fuller's Earth include as absorbents for oil, grease, and animal waste (cat litter) and as a carrier for pesticides and fertilisers. Minor uses include filtering, clarifying, and decolorising; active and inactive ingredient in beauty products; and as a filler in paint, plaster, adhesives, and pharmaceuticals. Fulling is an important step in the production of woollen garments, and can be traced back to ancient times. Cuneiform texts from Mesopotamia mention a raw material, which was delivered to fullers for the finishing of cloth. https://en.wikipedia.org/wiki/Fuller%27s_earth The use of tin to protect and store items, revolutionised the world. Fuller's Earth is a widely used product.Container of cylindrical sheet metal with perforated lid, used by Duerdin and Sainsbury Ltd, Sellers of Franbert's Fuller's Earth. Colour printed paper deteriorating. ‘Nett Contents 3½ oz.’ Ingredients still inside.Tin very rusty.'Franbert's Fuller's Earth. For the Toilet and Nursery. Protects the skin & Improves the Complexion. Nett Contents 3½ oz.'flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tin, tin plating, containers -
Federation University Art CollectionCeramic, Dry Glaze Bottle by Alan Peascod, c1980
Alan PEASCOD (1943-2007). Born England. Arrived Australia 1952. Alan Peascod was one of Australia’s most highly acclaimed ceramic artists. For over 35 years his work has been at the forefront of the Australian ceramics movement, developing radical techniques previously unexplored with his developments in unusual glazes and firing methods. His creative repertoire includes dry glazed vessels, alkaline glazes, majolica, saturated metals, and many post firing finishes. Alan's work with the very difficult reduced lustre technique is highly regarded. He was taught the method by Professor Said El Sadr in Cairo, Egypt in 1972 and this led to lifelong research of the technique throughout the Middle East and Europe. His work in the field led to the completion of his doctoral studies at the University of Wollongong in 1994. This study also led to satirical figurative sculpture themes dealing with the human condition. This work is part of the Jan Feder Memorial Ceramics Collection. Jan Feder was an alumna of the Gippsland Campus who studied ceramics on the campus. She passed away in the mid 1980s. Her student peers raised funds to buy ceramic works in her memory. They bought works from visiting lecturers who became leading ceramic artists around the world, as well as from many of the staff who taught there.Blue and green dry glaze bottle. alan peascod, ceramics, gippsland, jan feder memorial ceramics collection, gippsland campus, visiting artist -
Federation University Art CollectionCeramic, Tony Nankervis, Three Lidded Woodfired Cylinders by Tony Nankervis, 1986
Nankervis prefers the pre-Industrial Revolution method of firing pottery, involving heating the kiln by burning wood for five days, to the modern, quicker methods using gas or electricity. The distinctive surfacing in wood-fired ceramics is generated by the ash and volatile salts from the burning wood. "Because the wood ash and salts blush the ceramic pieces in the kiln, the finished work tends to take on the nature of the firing process," he said. "One colleague has described the process as painting with fire."(https://www.strathnairn.com.au/studios/artist-in-residence/montessa-maack-ursula-burgoyne-jen-lyall-and-vicki-grima-5ndd6, accessed 09 July 2021)Tony NANKERVIS Tony Nankervis taught ceramics from 1984 when the university was the Northern Rivers College of Advanced Education from 1984. before moving to Southern Cross University (SCU) in 1994. He retired from full time teaching in 2004. Nankervis was a pioneer of the long wood-fired ceramics technique in Australia: a technique he has been practising since the late 1970s Nankervis prefers the pre-Industrial Revolution method of firing pottery, involving heating the kiln by burning wood for five days, to the modern, quicker methods using gas or electricity. The distinctive surfacing in wood-fired ceramics is generated by the ash and volatile salts from the burning wood. "Because the wood ash and salts blush the ceramic pieces in the kiln, the finished work tends to take on the nature of the firing process," he said. "One colleague has described the process as painting with fire. There are particular qualities that only come from firing in that way, he said. "If you see some of these older ceramics, particularly from Asia, the surface qualities are discernible from the surfaces generated by post-Industrial fuels." (https://www.scu.edu.au/engage/news/latest-news/2004/leading-australian-potter-who-paints-with-fire-retires-from-lecturing-at-scu-after-19-years.php, accessed 09 July 2019)Three Lidded Woodfired Cylinders ceramics, jan feder memorial ceramics collection, tony nankervis, tony nankervic -
Federation University Art CollectionCeramic, Tony Nankervis, Dry Glazed Lidded Form by Tony Nankervis, 1986
Nankervis prefers the pre-Industrial Revolution method of firing pottery, involving heating the kiln by burning wood for five days, to the modern, quicker methods using gas or electricity. The distinctive surfacing in wood-fired ceramics is generated by the ash and volatile salts from the burning wood. "Because the wood ash and salts blush the ceramic pieces in the kiln, the finished work tends to take on the nature of the firing process," he said. "One colleague has described the process as painting with fire."(https://www.strathnairn.com.au/studios/artist-in-residence/montessa-maack-ursula-burgoyne-jen-lyall-and-vicki-grima-5ndd6, accessed 09 July 2021)Tony NANKERVIS Tony Nankervis taught ceramics from 1984 when the university was the Northern Rivers College of Advanced Education from 1984. before moving to Southern Cross University (SCU) in 1994. He retired from full time teaching in 2004. Nankervis was a pioneer of the long wood-fired ceramics technique in Australia: a technique he has been practising since the late 1970s Nankervis prefers the pre-Industrial Revolution method of firing pottery, involving heating the kiln by burning wood for five days, to the modern, quicker methods using gas or electricity. The distinctive surfacing in wood-fired ceramics is generated by the ash and volatile salts from the burning wood. "Because the wood ash and salts blush the ceramic pieces in the kiln, the finished work tends to take on the nature of the firing process," he said. "One colleague has described the process as painting with fire. There are particular qualities that only come from firing in that way, he said. "If you see some of these older ceramics, particularly from Asia, the surface qualities are discernible from the surfaces generated by post-Industrial fuels." (https://www.scu.edu.au/engage/news/latest-news/2004/leading-australian-potter-who-paints-with-fire-retires-from-lecturing-at-scu-after-19-years.php, accessed 09 July 2019)Presented by the artistLidded Raku fired box, dry glazedceramics, jan feder memorial ceramics collection, tony nankervis, tony nankervic -
Kiewa Valley Historical SocietyBottle - Ginger Beer, early to late 1900's
This glass ginger beer bottle was manufactured and used early to late 1900's, until the time that cheaper containers were invented(plastic bottles). This bottle was so constructed to be easily moved within the ginger beer processing plants from the brewing vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1990s the bottle slowly became phased out of production however boutique suppliers still preferred thick glass to contain any explosive action. Two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co. were the main suppliers for the Victorian State. In the period when this bottle was manufactured and used the major ginger beer brewing plants for the whole of Victoria were located in Melbourne because this was where its greatest consumer base was there and most rural areas were supplied by domestic sources (mother brewing ginger beer for the children). The Kiewa Valley and its region was one rural area which until road invrastructure was enhance covered the ginger beer thirst by local family production. As the population expanded considerably in the late 1940's (SECV Hydro Scheme) with a greater demand for "soft" drinks" being established supplies from larger towns and cities were call for. Each bottle was "branded" during manufacturing to show the contents were from a reputable supplier (H Taylor) and where it originated from. These bottles were recyled by the manufacturer as a way to cut production costs. This method of recycling the bottles back to the specific manufacturer has (except for South Australia)been overtaken by a no cost recycling collection by councils (funded by their communities). This method by passes the user cost principle as the bottles are processed as non generic. The uneconomical "on cost" which was replaced by the "throw away" less costly plastic containers however did not provide the keen domestic brewer of the "beer" with a reusable bottle. This heavy gauged glass ginger beer bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the filling production line. The method of pouring ginger beer into the bottle has been part of the "production line". This bottle has a one and a half pint capacity and is made from "light green" coloured glass(a protection against light penetration). This thick glass bottle, to contain ginger beer, required its thickness because of the extensive handling (man and machine) before final consumption. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck. Ginger beer was a "soft drink" of great demand. On the middle portion of this bottle is a large elongated circle within it and following the spherical line is "H. TAYLOR" ans a star separates this from "MELBOURNE" rounding out the bottom curviture. Within these words are the large initials "T H" . The "T" superimposed onto the "H". On the base and covering the whole bottom is the letter "T". At the opposite side to the manufacturers logo is "THIS BOTTLE CANNOT BE SOLD OR USED BY ANY OTHER PERSON & IS NOT COMPLETE WITHOUT STOPPER" glass bottle, non alcoholic drink, taylor ginger beer bottle, reuseable bottles -
University of Melbourne, Burnley Campus ArchivesNewspaper - Newspaper Cutting, The Sun News-Pictorial, Students ShowThat The Pruning Season Is Here, 1929
Newspaper cutting from The Sun News-Pictorial, July 23, 1929. Photo of 12 students pruning apple trees, with a close-up of secateur technique. The caption reads: "Daughters of Eve among the apple trees at Burnley School of Horticuture are still lending their support to the apple-a-day adage first advocated in the Garden of Eden. They are shown pruning the apple trees in the orchard, which is in the charge of Mr AW Jessep. Inset is the correct method of cutting to an external bud on the tree. There are 34 girl students being trained at the school for professional positions as agriculturists. Many former students have won good posts in Australian States. The agricultural course occupies two years and carries a special certificate."the sun news-pictorial, students, female students, a.w.jessep, burnley horticultural college, apple trees, pruning, orchard, students working outside, secateurs -
Melbourne Tram MuseumEphemera - Timetable, The Met, Set of 3 The Met - Metropolitan Transit, 1983 - 1984
Set of 3 The Met - Metropolitan Transit folded sheet timetables, printed on white paper, gives a map, time points, route description, notes and contact details. Note the contact times have been altered in hand writing. Folded by the half by half method. .1 - Routes 1 and 2 - South Melbourne Beach via Swanston St and Route 4 - South Melbourne Depot - City - October 1984. .2 - Routes 10 and 11 - West Preston via Collins St and route 13 - via Latrobe St - dated May 1984. .3 - Route 15 and 16 - St Kilda Beach - City via Swanston St - July 1983.trams, tramways, timetables, tickets, tram services, la trobe st, latrobe st, route 10, route 11, route 13, route 15, route 16, route 1, route 2, route 4 -
Warrnambool and District Historical Society Inc.Book - Illustrated Catalogue of Malleable Iron Hardware, The Eberhard Manufacturing Company, No. 7 Illustrated Catalogue Malleable Iron Hardware, 1908
Catalogue from American company of malleable hardware itemsThis is a book of 732 pages. It has a yellow cloth cover with black printing and pages edged in red. The contents contain an index and pages of black and white sketches and text.non-fictionCatalogue from American company of malleable hardware itemscarriage and wagon hardware, eberhard manufacturing company -
Warrnambool and District Historical Society Inc.Morse code key, Mid 20th century
This is a Morse Code key. Morse Code is a method of transmitting text information using short and long signals (‘dots and dashes’). It is named after Samuel Morse, the inventor of the telegraph and was developed in the 1860s. It was used extensively in the 1890s for early radio communication before it was possible to transmit voice and continued to be used in the 20th century along with voice transmission , especially by amateur radio persons. It was also used in military and naval communication but not so much today. It is believed that this Morse Code key belonged to Ted Salamy, a jeweller and the first person in Warrnambool to hold an amateur radio licence (1924 Call Sign A3AJ, the 35th licence issued in Victoria).This Morse Code key is of interest as an object more used in the past, especially by amateur radio persons. It is believed to have been the property of Ted Salamy, the first person in Warrnambool to hold an amateur radio licence. This is a metal Morse Code key with an oval metal base. It has three screws inserted in the base and two more screws attached to the sides of the base. There is a key lever on top of the base and this is adjustable. The hinge on which the key lever sits is missing. The lever has a round black knob at one end. ‘Made in U.S.A. H15.682’ Wm.M. Nye Co Inc. Bellevue W.A.’ morse code key, ted salamy,, history of warrnambool -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)Manufactured Glass, bottle and measure 'VAXOS', 1946
TROVE ‘Advertisement April 2nd 1941 WHY VAXOS No. 1 MUST NOT BE CONFUSED WITH NOSE DROPS, INHALANTS, OR OTHER TEMPORARY PALLIATIVES. Vaxos No. 1 is what medical science terms an Endotoxoid, an oral vaccine, and an entirely new form of antigen with very high immunising powers. Vaxos No. I contains only pure antigens and is entirely free of herbs, drugs, or bacterial organ- isms, and is, therefore, perfectly safe for anyone to take. Vaxos No. I is produced by an Eminent Medical Bacteriologist UNDER GOVERNMENT LICENCE.and it is the ONLY PRODUCT EMANATING FROM THE LABORATORY OF THE ORIGINAL DISCOVERER OF THIS METHOD OF TREATMENT AND IMMUNISATION. As such, it must not be confused with cheaply prepared substitutes.A clear glass bottle with a plastic screw top and a clear glass, cylindrical measure with graduations of 10 to 25 drops in a cardboard box c1946. ‘VAXOS’ was used to treat respiratory infections BOTTLE ; VAXOS / No. 1 / Vaccine Products (Aust.) / Australaisian Distributors / H.C.Sleigh / (Pharmaceutical Dept.) 582 Little Colins St. Melbourne C1 / BATCH No. 1215 / Left side ; for Acute / Common Cold / Bronchitis / Antrum and / sinus troubles / Manfd. Nov.,1946 / Nett Contents 15cc. Right side : for Chronic / Catarrh / Hay Fever / Bronchial / Asthma, etc. / EXPIRY / Nov., 1948 / Medium Size Bottle . MEASURE; Paper adhering to glass - VAXOS DROPS 10, 15, 25 / Front BOX - Lid MEDIUM SIZE / BOTTLE / FOR ACUTE CASES / Base ; VAXOS / No. 1 / A colloidal polyvalent Antigen designed to / relieve and confer immunity from / respiratory tract disorders........./ Left side DIRECTIONS / ............. Batch No. 1215 / Right side ; VAXOS No. 1 / Contents ........Vaxos is made under / Government Licence by a / qualified medical bacteriologist . Back Nett. Contents 15cc / Price 12/6 / VACCINE PRODUCTS / (AUST ) /........ Manfd. NOV., 1946 / EXPIRY NOV., 1948pharmacy, medicines, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, vaxos medicines, h.c.sleigh pty ltd, bacteriology, c.s.i.r.o departments melbourne, vaccine products australia, respiratory diseases -
Kiewa Valley Historical SocietyBridle Horse, circa mid to late 1900's
This stock horse bridle was probably used in the mid 1900's. This was the period when cattle and sheep mustering was at its prime. The movement of cattle and sheep was by mounted stock horse only and not by other methods. Northern territory cattle stations in the late 1900's started to use helicopters for "cattle control". In the KIEWA Valley/Bogong High Plains and other rural cattle/sheep producing areas required well trained stock horses and stockmen for cattle/sheep control. It is only in the later 1900's that motor bikes and four wheeled quad-bikes have taken over, in part, from the mounted stockman.This horse bridle is very significant to the Kiewa Valley because of the early introduction of cattle and sheep stations in what initially was regarded as a semi remote valley location. The maintenance of cattle and sheep in the Kiewa Valley was, and still is an important requirement of livestock management. A good stock horse bridle is important, especially during the period when cattle and sheep were grazed on the Bogong High Plains. The mustering and and moving cattle/sheep from the valley pastures to the high country was a demanding and dangerous exercise requiring "sure footed" stock horses.The "good specialised" bridle was a vital part of this cattle/sheep mustering. A scientific study started in 1947 to study the impact of grazing cattle/sheep on the natural Alpine and sub Alpine vegetation found grazing cattle had an adverse affect on the natural Alpine and sub alpine vegetation, and grazing on the plains was stopped by the Victorian Government in 2005.This "camp draft" on the Bogong High Plains could take up to six weeks.This harness bridle includes "blinders, winklers or blinkers" and would therefore be used on a pack or "working" horse. This bridle has rings on each end of the browband. The bridle is one used by a horse working in a team configuration pulling a heavy cart or wagon. The bridle has ten adjustable straps to allow it to accommodate a variety of horse sizes. See KVHS 0495 for a stock horse saddle.horse, country, leather bridle, gaiters, high country grazing, cattlemen, laces, studs -
Federation University Historical CollectionBook, Owen Jones, The Grammar of Ornament, 1868
Book featuring coloured plates of examples of historic ornamentRed cloth hard covered book of 112 plates bookplatenon-fictionBook featuring coloured plates of examples of historic ornamentornament, grammar, plates -
Melbourne LegacyPhotograph, Conference in Perth 1948, 1948
The photo shows a group of Legatees who attended the Legacy Club Conference held in Perth in September 1948. The three men at the front are Legatees Stan Savige on left and Bill Perrin in the centre. Other names are not known. Legatee Bill Perrin had been President in 1945 and had just been elected to succeed Legatee Savige as the Chairman of the Co-ordinating Council. The Legacy conference was held periodically and allowed Legatees from across Australia to gather together. The aim of the annual conference was an exchange of ideas and methods of carrying out Legacy functions, and to form general policy for cooperation between clubs and groups.These men were some of the founders and early members of Legacy throughout Australia and had fought in the first World War. Black and white photo x 2 of a group of Legatees at the Legacy conference in Perth.Stamped with copyright stamp of W.A. Newspapers in purple ink. Hand-written on reverse: 'Legacy Club Conference Perth' in pencil. legatee event, conference -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)Leisure object - Stereographs, view-finder & photo cards, Stereographic Photos Copyright 1911
Stereo-graphs were popular 1850 - 1930 Most stereoscopic methods present two offset images separately to the left and right eye of the viewer. Stereo-graphs feature two photographs or printed images positioned side by side about two and half inches apart, one for the left eye and one for the right. When a viewer uses a stereoscope, a device for viewing stereo-graphs, the two-dimensional images are combined by the brain to give the perception of 3D depth. The London Stereoscopic Company quickly developed technologies for mass - producing stereo-graphs; and between 1854 and 1856 the company sold over half a million stereo-graphs. Small, hand-held metal and timber steroeographic view-finder. The metal goggles are engraved with a free-flowing design. The rim of the goggles are covered in red velvet. A timber handle is attached with a metal hinge to the timber extension that has a wire frame to hold the stereo photographs. The streographic photos comprise 2 identical black and white photos mounted, side by side on brown card.Photocards 'ROSE'stereographs, stereoscopes, photographs, view-finder, wheatstone charles, london, moorabbin, melbourne, bentleigh, early settlers, market gardeners, entertainment, stereograph cards
