Booklet produced for the celebration of the life of Patricia Ann GRAINGER and her contribution to Port Melbourne and the wider community. Pat was a founding member of the Port Melbourne Historical & preservation Society. Serving as Treasure for the years 1993 - 98, Pat then took on the role of Secretary until ill health forced her retirement. Pat was known as a brilliant graphic designer , writer, activist and organiser who cared deeply for her adopted home & community - Port Melbourne.Eight page booklet with red, blue and white cover and featuring a photo of Pat GRAINGER. pat grainger, celebrations - life in port

The pessary was first made of hard rubber then later from vulcanite. A major manufacturer was Allen & Hanburys, London. They were made in six sizes. The pessary was used to support the uterus in cases of prolapse of the uterus or assisted the conditions of relaxation of the vagina and reduction of vaginal hernia. The designer of this pessary was William Morse Graily Hewitt (1828-1893), a British gynaecologist, obstetrician and physician. Vulcanite pessary. The pessary is loosely 'v' shaped, with a thicker section at top and two 'wings'.pessary, intrauterine device

The pessary was first made of hard rubber then later from vulcanite. A major manufacturer was Allen & Hanburys, London. They were made in six sizes. The pessary was used to support the uterus in cases of prolapse of the uterus or assisted the conditions of relaxation of the vagina and reduction of vaginal hernia. The designer of this pessary was William Morse Graily Hewitt (1828-1893), a British gynaecologist, obstetrician and physician.Pessary is made out of black vulcanite. Has two hinged wings with a hole through the centre, and when placed on a flat surface the object forms the shape of a "V".intrauterine device, pessary

Prior to World War II an international competition was held for design of a standard sailplane for use in Olympic competition in 1940 in Finland. The design chosen was the “Meise” from DFS in Germany and its designer Hans Jacob. The 1940 Olympics were cancelled due to the outbreak of war and post war international gliding competition has been organized as World Championships, not as an Olympic event. After the war the Meise was manufactured by firms in Europe and a few were built by amateurs from plans. In 1945, a United Kingdom firm, Chilton Aircraft Limited, revised the plans for the DFS Meise Olympia keeping its aerodynamic shape and prepared new technical drawings for the production of the Chilton Olympia. It engaged Elliotts of Newbury (a firm with aircraft production experience during the war) to built a set of wings for its prototype. The wings were made by Elliotts but it apparently refused to let Chiltons have the jigs required to build more wings. The matter was resolved by Chiltons transferring its production rights and equipment to Elliotts. Elliotts produced several batches of Olympias (the “EON Olympia”) – probably about 150 in total from 1947 including Marks 1, 2 and 3 versions (featuring some structural changes and design improvements). The Australian Gliding Museum’s Olympia is a Mark 2 (actually 2B according to the logbook) which can be distinguished by the built in main wheel and blown Perspex canopy. It was designated as serial number EON/O/34 by Elliotts. It was damaged badly at Bristol, UK, in 1949. The wreckage was acquired by a Melbourne based syndicate including Dave Darbyshire, and imported into Australia. Additional damage occurred in shipping due to the need to shorten the wings to fit them into a crate. The syndicate rebuilt the glider and re-launched it in 1956 (registration number VH-GHR). It was flown by the syndicate and several gliding clubs in Victoria and South Australia until about 1972. A potentially airworthy example of a now rare sailplane of historical importanceSingle seat wooden sailplane, partly restored.australian gliding, glider, sailplane, dfs, hans jacob, meise, olympics, eon olympia, chilton aircraft, elliotts of newbury, dave darbyshire, great eastern gliding club, barossa valley gliding club, murray bridge gliding club

The Hall Cherokee II glider is an American design for amateur construction from plans. The designer was Stan Hall (1915-2009), a professional engineer, who gained extensive experience in the United States aviation industry during World War 2 including the programs for military gliders. He continued to work as an engineer for aircraft manufacturers and as a consultant to the industry after the war. He was active in gliding and, in particular, the home built sailplane movement. The Cherokee II was one of about 10 glider designs that he produced: it came out in 1956. It is understood that over 100 Cherokee gliders have been built. In Australia the number is possibly 10 or 11. The Hall Cherokee VH-GVO was built by R.D Meares of Caringbah, New South Wales. The glider was registered as VH-GVO on 11 October 1973 and given serial number “GFA-HB-82” by the Gliding Federation of Australia. The Logbook for VH-GVO appears to be a complete record of the flying history; in aggregate 210 hours 40 minutes in the air from 331 flights. The first test hop occurred on 29 July 1972 at Camden, New South Wales. VH-GVO was last flown on 22 July 1986. Many of the flights recorded are of one or two hours duration. The glider was last inspected and certified as airworthy and in a reasonable condition at the Hunter Valley Gliding Club in July 1986. Since that time, until transferred to the Australian Gliding Museum, the glider was in storage. Structural restoration work has been completed on the fuselage and one wing. However, inspection of the other wing revealed extensive damage to the ribs and spars and consequently a decision was taken to make it a static exhibit. The exhibit is an example of home built construction of a type that has proved popular amongst amateur glider builders.The Hall Cherokee (formerly registered as VH-GVO) is a single seat wooden home built glider. The glider is constructed from wood, plywood, fabric and metal fittings, all commercial grade except for main wing fittings, pulleys, cables and bolts. The fuselage is simple with four main longerons and bulkheads with diagonal bracing. The wing has two identical solid spars which form a geodetic structure, hence the leading edge is non-structural. Registration VH-GVO – serial number GFA-HB-82 australian gliding, glider, sailplane, hall, cherokee, meares, hunter valley gliding club

The item was created by Bouwens and van Kampen, a ceramics business founded in Bussum by Greta Klaar. Greta married her pupil Johannes Bouwens in Amsterdam during the war. The couple then moved to Soest where the business became known as "De vlieg-uut". It went from strength to strength until a fatal accident in 1970 after which it was permanently closed. The designers and ceramicists specialised in small plates such as this commemorative one for Queen Juliana's accession to the throne following the abdication of her mother, Queen Wilhelmina.The item recalls the joyful celebrations that took place in Septermber 1948 when Juliana accepted the throne from her mother Queen Wilhelmina. The Queen had reigned for 50 years including the period of 1940-45 (WWII) during which she carried out her duties from London. Juliana and her family resided in Ottawa, Canada during those years. To some extent this event was the final celebration of liberation from the tyranny of occupation and the welcoming back of the Royal family to Dutch soil. Decorative plate to commemorate Queen Juliana's ascension of the Dutch throne in 1948. The plate is meant to be hung and has a piece of string for this purpose inserted through the rim on the back of the plate. The inscription reads: "Juliana Koningin 6 Sept.1948". On the back are the marks: "290KR." "BVK Soest" and "P.H.". It is gaily painted in red, blue and green on an off-white background. The central scene is recognisably Amsterdam with church tower, stepped gables and Dutch flags. The border consists of a circle of red, white and blue flowers; leaves are green.

Mark Cowley Lidwill was awarded an Honorary Fellowship in 1954 after his retirement to honour his working life.Mark Cowley Lidwill was born in England in 1878. His family moved to Melbourne in 1894. Lidwill studied medicine at the University of Melbourne, graduating with honours in 1902 and achieving a Doctorate in Medicine (MD) in 1905. Soon after graduation he moved to Sydney and in 1913 was appointed as the first lecturer in anaesthetics at the Royal Prince Alfred Hospital. That year Lidwill became the first person in the world to catch a black marlin with rod and reel. The event was celebrated in newspapers throughout the country and the marlin skeleton is now on display at the Australia Museum. Lidwill was also the designer of a machine which could deliver anaesthesia mechanically. Compact and portable, the machine delivered precise, although variable, concentrations of ether. Lidwill is also credited with developing the world’s first pacemaker. In a letter he wrote to Harry Daly in 1955, Lidwill was ambivalent about the fate of the machine: “No one would be bothered with it and they thought I was mad”.Printed certificate from the Faculty of Anaesthetists of the Royal Australasian College of Surgeons (RACS) awarded to Mark Cowley Lidwill as an Honorary Fellowship. Printed in black ink at the top of the certificate is the RACS coat of arms. The certificate is dated 26 June 1954 and has been signed by Harold R Dew, President of the College, and other members of the executive.mark cowley lidwill, faculty of anaesthetists, honorary fellowship, royal australasian college of surgeons, cardiology, pacemaker, royal prince alfred hospital, doctorate in medicine

Ivan Magill (1888-1986) designer, this piece was designed in 1926 along with other anaesthetic equipment.Chrome plated straight complete Magill laryngoscope in medium size format, with attached light bulb. Cylindrical handle for battery deposit and with a wavy hand grip for easy handling. Serrated and screwed lids on top and base of the handle grip for insertion of batteries and checking of electrical contact stud. The handle also has a metallic switch without any instruction of use. The arm of the handle has a detachable screw to adjust extendable blade position and firmness. The light bulb is attached to a metallic tube connector to the handle arm which is just pressed to the contact point base. The blade has a oxidation spot under the blade. The piece in full has several scratches marks mostly founded in handle, arm and top blade areas. Two stamped inscriptions are present on the arm area, the manufacturer name and register number.Stamped on the arm of the handle lateral side, A.CHARLES KING Stamped on the arm of the handle opposite lateral side, REG. NO. 74901[9]magill, a. charles king ltd, regi. no. 749019, switch, laryngoscope

Long term loan from Neurological Society of Australasia Museum of Neurosurgical Instruments,South Australia. Catalogue with Historical Commentaries Second Edition January 2006 Copy located at RACS MuseumTrumble's Skull Plough or craniotome devised by Hugh Trumble (1864-1962 ) CRANIOTOME. This craniotome was designed by Hugh Trumble (1894-1962) of the Alfred Hospital, Melbourne, one of the eight founders of the Neurosurgical Society of Australasia. It was a modification of an earlier instrument, similar in principle but less versatile, designed by Sir Henry Souttar(l875 - 1964), a very inventive surgeon who worked in the London Hospital. Souttar also used a motor-powered circular saw when necessary. He cut very large circular bone flaps, exposing the occipital lobes and posterior fossa in a few minutes. Trumble reported the use of this craniotome as "an expeditious method of cutting bone flaps" and in the designer's hands this claim was certainly justified. To use the crauiotome, it was necessary to hold the skull rigidly, and this was done by embedding the head in a plaster mould. Three holes were drilled in the skull to fix the pin of the craniotome, and the flap was then cut in a series of three arcs, after which the flap was elevated with levers until its base fractured. The 'Trumbolian" instrumentation was used in the Alfred Hospital by a number of Trumble's pupils. The craniotome is made of steel, not plated and apparently not stainless. It is believed that Trumble made his craniotomes himself, in a backyard workshop.

When the German Government imposed ID cards on the Dutch population they employed the collaborator and expert designer Jacob Lentz who claimed they were impossible to forge. The Jewish ones showed a black J on both front and back. However, a Jewish woman living in the Netherlands, Alice Cohn, did learn how to replicate them and thus saved numerous Jewish lives.These items are significant insofar as all Dutch citizens over the age of 15 were obliged to carry ID on their persons at all times.Proof of Identity cards issued by the Dutch Government under orders of the German occupying forces. Inside each folder are the owner's full name; DOB; address; occupation; fingerprints and Date of Issue.a) Photograph and signature of male - J.W.W. v. Alphen. Stamp: Gemeente (Municipality) Rotterdam. Inside cover: R29 No.487892. DOB: Sept.20 1890. b) Photograph and signature of female - H. v. Alphen. Stamp: Gemeente (Municipality) 's-Gravenhage. Inside cover: G41 No.003830. DOB: 12 July, 1920.

The drinking fountain is located in Catani Gardens, St Kilda. It was a gift to the City of St Kilda by Sali Cleve, a prominent local resident. It has aesthetic significance as a rare example of the Beaux-Arts style and is the only known public piece in bronze by noted architectural designer and artist Charles Adam Irwin. colour photograph, unmounted, good conditionThis Drinking Fountain is a Gift to the Public From Sali.Cleve.Esq. April, 1911st kilda, catani gardens, sali cleve, sali cleave drinking fountain, ca irwin, charles adam irwin, plaques

Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112 The Phoenix Foundry (1857-1906) fabricated iron and brass products - including engines and pumping gear for the mining industry, locomotives, steam rollers, water pipes, water gauges and diverse small items. Throughout its operation the business was located at premises on Armstrong Street, Ballarat . Background In 1852, at the age of thirty-three and after a year of operating his own engineering business at Williamstown, Lancashire-born blacksmith and engineer George Threlfall (1819-1897) arrived on the Sebastopol gold plain and immediately undertook blacksmith work repairing picks and tools for the miners. Little did he know that this fledgling business would be the genesis of the most iconic business of nineteenth-century Ballarat. At approximately thirty-nine years of age, English mechanical engineer Richard Carter (c1814-1883) came to Australia on board the Arrogant - arriving in Melbourne on 19 April 1853. He soon travelled to the Ballarat goldfields. Born in the year 1830 in Belfast (Ireland), mechanical engineer William Henry Shaw (1830-1896) arrived in Australia in October 1853. He worked briefly with George Threlfall at Sebastopol, then moved to Geelong to manage the small foundry of Frederick Moore. Twenty-four year old English-born iron moulder Robert Holden (c1831-?) left his home in Belfast (Ireland) in late 1854 and travelled from Liverpool to Melbourne on board the James Baines - arriving in February 1855. Afterwards he joined his brother-in-law William Henry Shaw in Ballarat. History Foundation to Incorporation In March 1857 George Threlfall joined in business with Richard Carter, William Henry Shaw and Robert Holden. They relocated Threlfall's successful engineering enterprise from Sebastopol to new premises in Armstrong Street, Ballarat. This business was then known variously as the Phoenix Iron Works Company, Phoenix Foundry or Messrs Carter and Co. By 15 April 1857 they were advertising that they were open for business as engineers, millwrights, boiler makers, smiths, iron founders and brass founders. In January 1858 George Threlfall left the partnership. Incorporation to 1889 1890 to Closing locomotive Y112 Builder: Phoenix Foundry, Ballarat Builder’s Number & Year: 238 of 1889 Designer: Kitson & Co Wheel Arrangement: 0-6-0 No. in class: 31 Entered Service: 24 July 1889 Taken off Register: 11 May 1961 The origins of the Victorian Railways Y-class lay with the decision by Kitson & Co, Leeds to place a 0-6-0 freight locomotive on display at the Centennial International Exhibition, Melbourne in 1888, together with a 2-4-2T suburban passenger locomotive. This marketing initiative proved successful as the Victorian Railways were clearly impressed with these machines, with both purchased after the exhibition and becoming the patterns for new standard locomotive types. Thirty examples of the 0-6-0 heavy freight design were ordered from the Phoenix Foundry, Ballarat, becoming the Y-class for main line heavy freight duties, while the 2-4-2T design became the E-class for Melbourne suburban passenger duties (represented by preserved locomotive E 236). The Y-class prove successful in service and accrued high mileages. They were inevitably superseded by more modern and powerful steam locomotives and a number cascaded into shunting and yard pilot duties, often with the addition of shunters steps along both locomotive and tender. Y 112 was one of the last in service when withdrawn in 1961. Fortunately it was saved for preservation and plinthed in central Ballarat, ostensibly in commemoration of Phoenix Foundry. I understand it is owned by the Sovereign Hill Museums Association. During the 1980’s, Y 112 was leased to Steamrail Victoria and restored to operation at an industrial site in Ballarat. Y 112 features an attractive lined apple green livery and has performed various rail tours around Victoria since restoration. It is normally based at the Steamrail depot in Ballarat East. Y 112 is the only 19th century design in operational condition in Victoria and as such is one of the oldest working steam locomotive in Victoria . Historic - Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112Phoenix Foundry Plate Oval shaped plate with an image of a phoenix centered at the top with lettering surrounding it.Phoenix Foundry No 238 Ballarat Company Limited 1889.puffing billy, phoenix foundry, ballarat, locomotive y112, phoenix foundry plate - replica

A hand painted paper scroll, which Berthold Irving Meier (Bert. I. Myer, or BIM - a well-known Commercial Artist in Melbourne) had made when a member of the team of set designers and scenery painters, for the 8th Employment Company's production of "Sergeant Snow White", which was performed at the Melbourne University Union Theatre, in April 1943! It was a Sergeant Doc K Sternberg production, the other set designers being L/Corporal Emil Wittenberg, Private Klaus Friedeberger and Private Friedrich (Fritz) Schoenbach. The show incorporated songs and music by Kurt Kohn (pseudonym Ray Martin), with Erich Liffmann cast as Prince Charming. The masks for the ballet "Ghosts of Europe" were designed by Private Erwin Fabian. Others in the cast included Corporal A P Schmitz (ballet soloist), Sergeant Sigismund Lohde, and Sergeant H Mayer. The Production was extremely well-received and was called "a colourful and tuneful revue ......... a fine achievement of writing and direction......scenery and stage décor ingenious and amusing." There were write-ups in both "The Age" and "The Argus" Melbourne newspapers at the time. The scroll was originally housed in a wooden box, with "windows", (since lost) so that when the scroll was wound though, each scene, and the accompanying description from the original programme, could be seen.Two long pieces of paper which originally would have been one and has been rolled into a scroll. The length of paper has been divided into two and then divided into approximately 12 sections. On the left in different colours is bits of information relating to the scene. On the right are different scenes from the play.bert i myer, bim, sergeant snow white, 8th employment company, melbourne university union theatre, doc k sternberg, f schoenbach, kurt kohn, erich liffmann, erwin fabian, a p schmitz, h mayer, kathleen whelan, tatura internment camps, berthold irving meier, klaus friedeberger, emil wittenberg, friedrich (fritz) schoenbach, sigismund lohde

Discusses the work, design techniques and career of first recipient of the Essington Lewis Award (for Industrial Design) - Frederick Ward. Ward's work introduced all the essential principles of the best Australian furniture: functional form; use of Australian materials; respect for the nature of all materials; suspicion of ornament and a sense of purposeful proportions.Review of Fred Ward’s Award by the Industrial Design Council.Typewritten (c copy), quarto, 2 pagesfrederick ward, industrial design, australian furniture, function, form, australian materials, essington lewis award, robin boyd, manuscript

Boyd discusses the themed pavilions and some of the country pavilions at Expo 67.Typewritten (p/copy), quarto, 6 pagesexpo 67, pavilions, robin boyd, manuscript, ohm2022, ohm2022_31

Boyd argues that modern architecture has triggered a necessity for greater harmony between architects and engineers. Boyd describes the architectural qualities of tension structures through an analysis of several case studies including projects by Frei Otto and Boyd's own house at Walsh St. Being a relatively new concept, Boyd criticises the neglect towards smaller buildings in this structural system, and also highlights some of its shortcomings. A 2-page letter from 'Arthur' (surname unknown) at the University of Melbourne's Department of Civil Engineering provides feedback to Boyd on his analyses of the chosen case studies.Original manuscript of article published in The Architectural Review Vol.134, No.801, November 1963, pp. 324 - 334. This draft was returned with covering letter from: ‘Arthur’ (AJF) Melbourne Uni. Dept Civil Engineering. Typewritten (c copy), foolscap, 14 (+2 quarto letter) pagesMinor handwritten editsengineering, tensile structure, master-designer, bernard lafaille, zagreb french pavilion, matthew nowicki, livestock pavilion, frei otto, paul rudolph, florida house, bill irwin, kevin borland, peter mcintyre, john and phyllis murphy, yuncken freeman, sidney myer music bowl, eero saarinen, yale hockey rink, edward d. stone, brussels u.s. fair pavilion, boston arts centre, walsh street, robin boyd, manuscript

In this article, requested by Architecture in Australia, Boyd condemns the lack of development in the shaping the identity of Australian architecture, similar to the contents of Texas Quarterly 'Architecture in Australia' Vol.5 (see D092), Boyd writes about the need for designers and architects to create a new design language rather than recycling and reminiscing on old British aesthetics despite wanting to gain international recognition.Original manuscript of an article published in Architecture in Australia, Vol.56, No.3, June 1967 pp.454-465.Typewritten (c copy), pencil edits, quarto, 26 pagesPencil corrections and edits in textaustralian architecture, sydney school, architecture in australia, robin boyd, manuscript

Boyd forewarns that the article is strong on generalisations and not diplomatic. He writes that Australian architecture is old-fashioned, second-hand, rejects sophisticated world fashion trends, and has under-developed professional pride and determination. In the last few pages, Boyd advocates a code of integrity and goodness in architecture, calling on designers to come together and commit to the code.Original manuscript published in Architecture in Australia, vol. 56, no. 3, pp. 454-465.Typewritten (c copy), pencil edits some pages missing, quarto, 26 pagesIncomplete- pages missing, and includes page 8Aaustralian architecture, sydney school, perth architecture, university architecture, code of integrity in architecture, robin boyd, manuscript

Short piece noting that the designs on the 'tails' side of the new decimal currency were created by Australian industrial designer Stuart Devlin, but that Devlin was not credited in publications by the Decimal Currency Board.Typewritten (c copy), quarto, 2 pagesdecimal currency, coins, industrial design, stuart devlin, rmit, colin barrie, industrial design council of australia, robin boyd, manuscript

Boyd stresses the importance of Australian designers to discover their own sense of style rather than creating 'stale' imitations from other countries.Typewritten (c copy), quarto, 3 pages, (pages 22 & 22A & 22B)Excerpt from an unknown document. Only three pages from the document.australian architecture, americanisation, 'america in australia', robin boyd, manuscript

Robin Boyd was involved in creating several TV series for the ABC University of the Air. 'Design in Australia' was an eight part series. (Items D184-D193 contain all the manuscripts except part six titled 'Communications'.) In part 8, Boyd concludes his lecture with an overview of the state of Australian design. Boyd points to the uniqueness of Australia's natural landscapes and asks a series of pointed questions, implying that Australian design does not reflect or match up to its context. In Boyd's view, Australia now produces world-class designers, but lacks a world-class design culture, leading the best professionals to leave for the US or UK. Boyd concludes by arguing that Australian design culture can be developed into something both connected to the rest of the world and still uniquely Australian.This is a draft script for the ABC television program 'University of the Air', subtitled 'Design in Australia', broadcast in 1965.Typewritten (c copy), foolscap, 12 pagesInscription in pencil on p.8 - "good ideas (Kings + fountain)"university of the air, design in australia, robin boyd, henry lawson, d.h. lawrence, kangaroo novel, canberra, manuscript

The courtyard table was purchased at the same time as the Harry Bertoia chairs. The designer and manufacturer are unknown. Various repairs have been made to it over the years.White steel frame with reinforced glass topjohn batman motel, walsh st furnishings, robin boyd

This Beco lamp was designed by Donald Brown, a pre-eminent Australian lighting designer in the '50s and '60s. Robin Boyd often specified BECO lighting, including elsewhere in his own home. This was originally a bedside reading lamp in the upper living room, as seen in the Mark Strizic 1958 photograph in Robin Boyd's book Living in Australia p129.Beco 720 lamp, with black stand base with switch and white glass shadeBrown Evans & Cowalsh st furnishings, robin boyd, ohm2022, ohm2022_25