According to the UK National Archives, the firm F. C. Chamberlain & Co. was founded by Frederick Chamberlain, who made boot uppers at West Street, Wellingborough, in 1891. In 1903, he had moved to Mill Road, and by 1903, was established in Palk Road, producing boot uppers, leggings and gaiters by 1919. These gaiters are therefore presumed to be an early example of products produced by the company.Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle (now missing) and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Embossed manufacturer's name, "F.C. CHAMBERLAIN & CO/1913"legging, gaiter, f c chamberlain & co, first world war

White card with glossy exterior surface, matt inside, featuring tram 33 line drawing printed onto one quarter in glossy green ink. Other half on the outside has a stuck on label with details about the Ballarat Vintage Tramway and the makers logo - Alikan Graphics and their phone number. On inside is Christmas Greetings for 1991 from Peter Winspur to Warren Doubleday. The PS concerns the 1991 Christmas card of the Metropolitan Fire Brigades Board which had a Mark III pumper parked across the tram lines in Melbourne at the top end of Collins St.In blue ink on inside of card is "To Warren / Christmas Greetings / All the Best for 1992 / from / Peter." see brief description for information regarding the PS.tramways, trams, greetings cards, ballarat vintage tramway, btm logo

Specification - tender document - approx. 90 pages + folded drawings + card covers (with one plastic sheet), black comb bound, titled "PTC Restoration of Heritage Trams - Specification Tender No. 95252" with table of contents. Prepared by Asia Pacific Rail for the Public Transport Corporation June 1995 for work on trams or general overhaul of trams S164, T180 and X217. Details the work to be tendered for, conditions, paintwork, electrical interior and exterior of the trams. Drawings, Rolling stock Standards, lists relevant drawings. Notes the input of the TMSV Work was not proceeded with. Not known if actual prices received.trams, tramways, restoration, tramcars, s class, t class, tmsv, x class, tenders, specification, ptc

The sphygmomanometer is an early diagnostic instrument used to measure blood pressure. Since the discovery of blood circulation in 1628, the search for accurate, convenient, simple, and non-invasive tools has led to evolving measuring devices and cuffs. Until the twentieth century, few doctors tolerated the inconvenience of blood pressure measurers and relegated the exiting tools to laboratory research. The mercury and later aneroid sphygmomanometers provided the accuracy and portability required for clinical use.The sphygmomanometer is an early diagnostic instrument used to measure blood pressure. Since the discovery of blood circulation in 1628, the search for accurate, convenient, simple, and non-invasive tools has led to evolving measuring devices and cuffs. Until the twentieth century, few doctors tolerated the inconvenience of blood pressure measurers and relegated the exiting tools to laboratory research. The mercury and later aneroid sphygmomanometers provided the accuracy and portability required for clinical use. In common daily use by nurses for clinical assessment of patients' blood pressure.metallic box and contents -The sphygmomanometer is enclosed in the beige metal container. There is a click opening button on the exterior inferior end. The lid lifts via an internal hinge on the superior end to reveal a glass cartridge tube calibrated to 300 millimetres of mercury. The case and meter were manufactured in Germany (according to original museum catalogue worksheet) and identified as the “Mercurius Miniatur Modell.” The dark green rubber bulb and of tubing are in good condition. The black cotton fabric cuff shows signs of wear and is frayed at the bladder insertion opening. According to the company insignia on the bladder, it was manufactured by ACCOSON in England. superior lid - silver metal plaque in centre, engraved P.T.S., right corner of lid - white sticky label - black ink 176-01, manufacturers stamp inside lid - SPHYGMOMANOMETER/Mercurius/MINIATUR MODELL/Made in Germany, serial number 342308, on base of box, white paint - 176-01sphygmomanometer, medical instrument, blood pressure, alfred hospital nurses league, student nurse training alfred hospital

The Kew Civic Centre (A K Lines, MacFarlane & Marshall, 1972) was built next to the Kew Civic Hall (A C Leith & Bartlett, 1960) on the site of the former mansion Ordsall (later renamed South Esk). Whereas the entrance to the Civic Hall was positioned off Civic Drive, the main entrance to the Civic Centre faced Cotham Road, as shown in the undated perspective drawing of the proposed building. The Civic Hall was used for public functions and performances, while the Civic Centre was used for civic offices. It also contained the Council Chamber. The building opened in 1972, following the relocation of the councillors and council officers from the former Town Hall in Walpole Street (now a Woolworth's supermarket). Following the amalgamation of the former City of Kew into the City of Boroondara in 1994, the Civic Centre was sold to Trinity Grammar School. The exterior of the Centre has been modified by Trinity Grammar.A report for Heritage Victoria (date) describes how two architectural firms dominated the designs for new civic buildings in Victoria during the post war period. The report claims that: "An interesting sub-theme in the erection of post-war municipal offices in Victoria is that a considerable proportion were designed by the same three or four Melbourne-based architectural firms, who established themselves as the leading specialists in this type of work. The two most prolific firms in this regard were A K Lines, MacFarlane & Marshall, and A C Leith & Bartlett; both, in fact, had made names for themselves as designers of local government offices prior to the Second World War. Lines' office, for example had designed the Eltham Shire Offices in 1941, while Leith's firm had been responsible for the celebrated Heidelberg Town Hall in 1937). Both practices parleyed this early experience into a lucrative post-war career, designing numerous municipals offices well into the 1970s." (Survey of Post-War Built Heritage in Victoria, Built Heritage Pty Ltd, 2010.) The perspective drawing importantly captures the original design and function of the exterior of the building and its public entrance.Hand-coloured perspective sketch of the new Kew Civic Centre, completed in 1972 to designs by A K Lines, MacFarlane & Marshall; and located on the corner of Charles Street and Cotham Road, Kew. The sketch represents the front elevation of the building and its relation to the preexisting Kew Civic Hall at right. The three storey building features strong vertical concrete buttresses that extend across the three levels. KEW CIVIC CENTRE / A K LINES, MACFARLANE & MARSHALLkew civic centre, a.k. lines, macfarlane & marshall, architectural drawings, civic buildings -- kew (vic.), town hall -- kew (vic)

Vessel - Iron Clay, is a wheel thrown vase that curves upwards from a narrow base to form a wide, rounded shoulder before concluding at a short, delicate rim. In contrast to the unglazed, rough texture of the exterior surface, the entrance to the vessel is smooth and shiny due to a tea leaf dust glaze. This is a low alumina tenmoku glaze, containing magnesium oxide which is responsible for the dark yellow/green striations of speckling which are formed during the slow cooling process of a reduction firing. This patterning is intermittent and dispersed with a grey/green pebbled effect. The stoneware vessel is built from clay with a high percentage of iron.

Memos - carbon copy on quarto paper - from the Publicity Officer to the Chairman regarding a window display in Victoria House London, dated 4/10/19?9? (Year only typed as a 9). Refers to a letter from Sir Norman Martin. Suggests two large photos of the SW6 trams exterior and interior, and the possibility of a scale model by Meadmore Engineering where Peter Duckett works and notes that Mr. Bell gave him recently a controller. Has a reference to Mr. Bell. Mr Risson commenced work on 1/10/1949 though in correspondence with Paul Nicholson, he felt that 1949 would be correct.Initialled by Lewis Russell.trams, tramways, sw6 class, london, models

The ship Speke, which was wrecked in 1906 near Kitty Miller Bay, was named after the town Speke in Liverpool, where Speke Hall is located. Source http://www.nationaltrustcollections.org.uk/place/speke-hall Speke Hall This half-timbered Tudor courtyard house acquired its present shape during the 16th century under the ownership of Sir William Norris and his grandson, also Sir William. It was completed, except for some minor additions, for Edward Norris by 1606. The predominant architectural message of Speke is the decorative potential of wood. The exterior, with its high proportion of timber to infill, is a riot of geometrical patterning, while many of the Tudor interiors are filled with carved and embellished panelling – including a genealogical overmantel from c.1560 – some probably imported from the Low Countries, where the Norrises had trading connections. After a period of neglect, Speke was restored and entirely refurnished in the mid-19th century by the Watt family. 2 x Large photos of Speke Hall - 1 Black & White, 1 coloured.Speke Hall, Gardens and Estatethe speke, sailing boats, shipwrecks, photographs, speke hall

Official opening of Eltham Library; The Hon. Rupert. J. Hamer, E.D., M.P. (left) and Cr. G.C. Dreverman (right), 17 August 1971, in front of a plaque reading "Eltham Library opened by the Honourable R. J. Hamer E.D., M.P. Chief Secretary of Victoria, 17 August 1971" on the exterior bluestone wall. The Eltham Branch of the Heidelberg Regional Library Service was opened on 17 August 1971 by Victoria’s Chief Secretary R. J. Hamer. The library was designed by the firm Leith and Bartlett and was the southern wing of the Shire of Eltham Offices in Main Road Eltham. Visitors entered a “book plaza” which embodies the display techniques of a bookshop. Through this area was located a quieter area for reference and the more “purposeful” reader. The library was opened as part of the Shire of Eltham’s centenary celebrations. The library and Shire Offices were demolished exactly 25 years later in 1996. The current library was opened in 1994. This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book, "Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital imagesepp, shire of eltham pioneers photograph collection, shire of eltham, shire of eltham centenary, eltham library, opening day, cr. g.c. dreverman, the hon. r.j. hamer

22 NBHC - Passenger Carriage - Excursion Car - specially modified for Wheelchair access allowing it to carry for wheelchairs and Guard's Van Puffing Billy Service History or Notes Between 1979 and 1988 the Puffing Billy railway built six more NBHs, numbered 18-23. These had steel frames, padded seats, and a wide "window sill". At first glance they look the same as the previous NBHs. There are other minor construction differences due to the use of steel framing. 22NBH entered traffic in 1998. Currently these six steel framed NBHs (numbers 18-23) are being modified to provide double doors and space for wheel chairs at one end. The photo on the right shows the exterior of one such NBH. These have a seating capacity of 24 passengers. Oct 2009 - Rebuild continues. Aug 2016 - 22NBC Wheel flats removed Sept 2016 - 22NBC Wheel flats removedHistoric - Puffing Billy Railway Narrow Gauge - Passenger Rolling Stock: Excursion Car 22 NBH which has been converted by the addition of a Guard's Van compartment and modified for Wheelchairs access by Puffing Billy Railway and re classed & numbered 22NBHC22 NBHC - Passenger Carriage - Excursion Car - specially modified for Wheelchair access allowing it to carry wheelchairs and to have a Guard's Van compartment. made of wrought iron and timber22NBHCpuffing billy, pbr, rolling stock , 22 nbhc

Royal Australian Air Force officer’s cap.Navy cotton drill peaked cap with black crossgrain band around exterior. Two black eyelets sit above band on either side. Black patent leather chin strap attached by two gold buttons on brim, slightly misshapen. Embroidered patch carrying a red velvet and metal crown (Queen Elizabeth II era) with blue, green and red embroidered knots mimicing jewels, sits above a gold eagle above now tarnished gold leaves. Interior sweatband in patent leather with plastic layer on top interior, underneath which is a manufacturer’s label with red ink. Strip of folded newspaper (H06.2) inserted inside interior sweatband.Label reads “M.TX/SIZE 6 7/8/A [broad arrow] F/MADE IN AUSTRALIA”. Black ink stamp on inside of sweatband reads “M. TX” inside a circle and “S19/[broad arrow]”raaf, royal australian air force, officer

These trousers are part of a Royal Australian Army Ordnance Corps uniform. The Royal Australian Army Ordnance Corps (RAAOC) is responsible for various logistics and organisational operations, such as maintenance of parachutes, fuel distribution, personnel administration, exlosive disposal and laundy operations. The trousers were manufactured in 1969 and were worn by an unknown RAAOC serviceman. The patches on the sleeves of the corresponding jacket denote that he had earned qualifications as a parachuter and a marksman and that he was a Warrant Officer 1. Due to the period of manufacture it can be presumed that the serviceman whom this uniform belonged to served in the Vietnam War.As historic military uniform trousers dating to 1968, it is presumed that this item would have been used in service during the Vietnam War. The wearer of the uniform is unknown, however the patches and flashes attached signify that the serviceman worked for the Royal Australian Army Ordnance Corps, earned qualifications as a parachuter and marksman and ranked highly as a Warrant Officer 1. The item is representative of a type of uniform worn by high ranking RAAOC servicemen during the 1960’s. It is also in very good condition for its age.khaki coloured trousers which are composed of a heavy fabric. The trousers button up at the front with 6 plastic buttons. There is an additional strip of fabric attached to the right-hand fly which can be fastened with an extra button on the interior of the left-hand fly. There are an additional 6 buttons along the interior waistband. There are also three buttons on the exterior waistband down the front and a buckle. The buttons are composed of brown plastic. There are two open hip pockets, one on either side, and another button-up pocket on the right-hand side of the back. There is a white label with inscriptions attached to the interior of the back pocket with an extra piece of fabric attached for mending patches.Printed in black inscriptions on the white label: CONWAY BROS. PTY. LTD ADELAIDE 1969 (a broad arrow) Class 8405-66-025-6183 A W M 7 (these characters are stamped in faded black ink) SIZE & WAIST 33R MATCHING JACKET 37-38R in a box are the words: DRY CLEAN ONLY. Re-press on original seams. Creases set by Si-ro-set. Mending patch attached. (end of box containing words) NAME.....DOCKSEY (‘Docksey is in hand-written black ink) ARMY No.....216308 (numbers also hand-written in black ink) (the number 40 is also wrtten in faded black ink in the top right corner of the label)military, army, raaoc, marksman, royal australian army ordnance corps, parachuting, warrant officer, uniform, trousers

This case belonged to Leonard Thomas (VX21070) who was born on 23 Aug 1900 in Cardiff England. By the Second World War, Thomas had emigrated to Australia and was residing in Elwood when he enlisted in Caulfield in 1940. Thomas served during the war as a Private and was discharged on 31 May 1949 from the AIF Mov and Control Group. His full service records are not currently available via the National Archives Australia and so it is unclear whether this case was part of the equipment of his role or a personal item.This case contains a number of inscriptions which may aid researchers to understand the life and movements of the owner, Leonard Thomas. The apparent crest is of special interest, suggesting that Leonard Thomas was connected to equine activities though the unavailability of his service records mean this fact is not confirmed. The item has interpretive potential, to discuss matters of equipment, emigration, use of horses during war and possibly leisure activities if the crest is taken as a reference to polo.Horse shoe shaped case in brown leather constructed of a lid and base. Used for storing shirt collars. Lid and base respectively constructed of two pieces of leather (one top and one edge) which are stitched to heavy card interior lining, mustard yellow in colour. The lid and base are held together by a sewn on leather strip and fastened at the top with a metal buckle; the holed strap through which the buckle attaches has broken. This strap in turn passes vertically down the back of the case and underneath (forming the strip which joins the two halves). Exterior base carries handwritten inscriptions, as does the interior lid. Black ink stamps throughout.Stamps read "L THOMAS" along an upturned horse shoe, underneath which are possibly clubs and an up-facing arrow. Service number written on side of case reads "VX21070". Handwritten inscription reads "Leonard Thomas/33 [illegible three words]/Cardiff/April 20th 1921." Interior of lid reads "LEONARD THOMAS 5-2-20" with a striped triangle below.case, horseshoe, cardiff, england, united kingdom, second world war, elizabeth thomas, world war ii, world war 2, 1940s, emigration

Christmas Card prepared by Peter and Patti Duckett and sent to Keith Kings Printed photo on exterior with red printed ribbons, photo corners on inside with another photo and gold block print and the Duckett's address. Photographs by Peter Duckett. Item made for 1996 Christmas Card titled "Single Track Days on the East Brighton Line", featuring the story of the single track extension in 1937 for the East Brighton, route 64 line. Notes the staff system in use for Safeworking. Cover photo includes the driver of W2 class 452 bound for East Brighton, picking up the staff from another car and the inside print of tram 550 at the terminus."To Keith" in ink.trams, tramways, east brighton, route 64, safeworking, staff, crossing loop, w2 class, tram 452, tram 550

A recording done in 1967 of some legatees with the intention it might be used for an official history of Legacy. The handwritten label implies it was from Bendigo Legacy. Names mention are Legatee Bunty Lawrence at Group Conference in 1967 (about 40 mins), and Legatees Neil Ferguson, Frank M?? and Fred Percival. A common means of recording conversations for the future in the 1960s.Significant in that the recording is to be used in the official history of Legacy in Australia.Magnetic tape on a clear plastic spool, stored in a cardboard box.Cover, exterior "RCA / Red Seal / Magnetic Recording / Sound tape / High Fidelity-Double Length-Double Strength / 200 feet-Mylar-splice free - Type 5TM-12" Sides of box; "RCA, Radio Corporation of America, reel no, title date. RCA Milar*-Double Length, Double Strength Type 5TM-12, 5" reel 1200Ft 1/2 Milx1/4' " Hand written in biro various details of Legatees speaking and title and Bendigo Legacy Club. Typed instructions on "how to splice a tape". Some details of the quality of the tape. No 10V3076history, legatee

Troy weight is a system of units of mass from an unknown origin. While the name Troi is believed to have come from Troyes in the north east of France the system used primarily in the precious metals industry and adopted in Australia originated in 15th century England. Troy weight units are the 'grain' and 'pennyweight' (24 grains), the troy ounce (20 pennyweights), and the troy pound (12 troy ounces). One troy ounce equals 31.1034768 grams. The troy ounce and grain were also part of the apothecaries' system and was long used in medicine, but has now been largely replaced by the metric system (milligrams). When the Weights and Measures Act was passed in Victoria in 1862 local inspectors were established throughout the colony to ensure accuracy particularly in the weighing of gold. By the 1870's each local council had a set of standards that were used to test the scales, weights and measures of local merchants and businesses. This set would have been de commissioned some time after 1947 and was offered back to the Borough of Eaglehawk in 1989. Hinged, lockable wooden box with brass handle, hinges, latches and lock. Remnant wax on front face of box above and below lock. Interior of box is lined with purple velvet which is worn in several places. Box houses nine troy weights ranging in size from 100oz Troy to 2oz Troy. 1oz Troy is missing. Accompanying set is a two page letter from Weights and Measures Branch of Consumer Affairs offering set back to the Borough of Eaglehawk in 1989. Troy Weights: Part a) 100oz Weight, 68 mm Diameter at base x 113 mm H b) 50 oz Weight, 53 mm D x 90 mm H c) 30 oz Weight, 45 mm D x 77 mm H d) 20 oz Weight, 39 mm D x 65 mm H e) 16 oz Weight, 37 mm D x 60 mm H f) 8 oz Weight, 30 mm D x 47 mm H g) 4 oz Weight, 24mm D x 36 mm H h) 2 oz Weight, 19mm D x 28 mm H i) 1oz missing Hinged Wooden Box: Part j)171 mm H x 300mm W x 196 mm D Typed two page letter: Part k) 295 mm H x 210 mm W x 1 mm Top Troy: Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD. Side Troy : Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD above a series of date stamps recording every time the weight was tested. Date stamps: 30.4.1866; 16.9.81, 30 12.86; 1.2.92; 10.5.97; 15.1.04; 10.2.09; 17.12.14; 20.4.20; 29.9.25; 23.1.31; 18.6.36; 14.7.41: 11.7.47 Exterior Top of Box: Remnant of paper pasted to wood. Faint printed text 'ON HIS MAJESTY'S SERVICE'.borough of eaglehawk, making a nation exhibition, city of greater bendigo commerce

Robin Boyd was involved in creating several TV series for the ABC University of the Air. 'Design in Australia' was an eight part series. (Items D184-D193 contain all the manuscripts except part six titled 'Communications'.) In Part 5, Boyd identifies three styles of interior decoration in Australia. The first, Exhibit A is directly influenced by the fashions of Paris, London and New York and does not integrate the interior with the exterior. Exhibit B is the Australian architectural style of the 1960s. Exhibit C is characterised by practical, cheerful and easy to clean up interior fittings based on colourful plastics. Boyd refers to this style as "Australian pop art". He continues by explaining why Exhibit C came to be the preferred Australian style over Exhibit B. He suggests that the Australian public is ill-informed and misguided, ultimately concluding that Australian interior design reflects the public's lack of taste. (Same content as item D193, differing side notes on left side of pages)This is a draft script for the ABC television program 'University of the Air', subtitled 'Design in Australia', broadcast in 1965.Typewritten (c copy), foolscap, 15 pages (compared to D193, 11 pages) (Two copies)One copy has crisper letters typed over on pages 1 and 5.university of the air, design in australia, australian style, interior decoration in australia, frederick ward, lester bunbury, frances burke, grant featherston, modernage fabrics, manuscript

Robin Boyd was involved in creating several TV series for the ABC University of the Air. 'Design in Australia' was an eight part series. (Items D184-D193 contain all the manuscripts except part six titled 'Communications'.) In Part 5, Boyd identifies three styles of interior decoration in Australia. The first, Exhibit A, is directly influenced by the fashions of Paris, London and New York and does not integrate the interior with the exterior. Exhibit B is the Australian architectural style of the 1960s. Exhibit C is characterised by practical, cheerful and easy to clean up interior fittings based on colourful plastics. Boyd refers to this style as "Australian pop art". He continues by explaining why Exhibit C came to be the preferred Australian style over Exhibit B. He suggests that the Australian public is ill-informed and misguided, ultimately concluding that Australian interior design reflects the public's lack of taste. (Same content as item D188, differing side notes on left side of pages)This is a script for the ABC television program 'University of the Air', subtitled 'Design in Australia', broadcast in 1965. Item D188 is the draft version.Typewritten, foolscap, 11 pages, (compared to D188, 15 pages)university of the air, design in australia, australian style, interior decoration in australia, frederick ward, lester bunbury, frances burke, grant featherston, modernage fabrics, manuscript, ohm2022, ohm2022_30

This hat was part of a RAAF uniform and likely dates to the Second World War due to the style of crown. Hats such as these are often misshapen at the crown due to the use of earmuff-style headphones worn by aircrew during the Second World. Navy peaked cap in cotton with beige topstitching along crown. Black cotton grosgrain ribbon band. Black leather chin strap buttoned to left and right with black metal button carrying image of crown atop eagle. Centre of hat carries embroidered patch with crown in gold-coloured metal and red fabric with red and green additions mimicking jewels. Crown sits above two metal shapes, an eagle with arms outstretched and laurel branches. Two eyelets on left and right side of the cap, bronze on interior and painted black on exterior. Interior of cap brim is green plastic or patent leather now cracked. Interior of hat cotton is dark cotton with quilted top.second world war, royal australian air force, raaf, r.a.a.f., flying, uniform, world war ii, world war two, world war 2

Refers to the service of Lt.Col. "Roy Shadforth".1. Red waist jacket, white collars and white cuffs. 38 BN. R.V.R. Badge (Gold) on collars. Epaulettes show gold Lt.Col. badges and gold A.M.F. buttons. It has one interior pocket. 2. Red sleeveless vest. 4 brass (Gold) buttons, AMF motif, lined with a faint light cotton. 2 exterior pockets. 3. Shirt, short sleeved - off white. polyester cotton, 6 clear buttons, one breast pocket. 4. Black bow tie with plastic mount. 5. Trousers, woollen, black. Red pin stripe on outside legs. Lined with same cotton as vest. Straps at bottom of legs to hook up under feet.1. Written inside one arm pit is “Shadforth” 2. Written inside vest is “Shadforth” 5. Written on trouser pocket is “Shadforth”post ww2, cmf, uniform, roy shadforth, passchendaele barracks trust

Set of three Christmas Cards prepared by Peter and Patti Duckett and sent to Keith Kings Printed photo on exterior with red printed ribbons, photo corners on inside with another photo and gold block print and the Duckett's address. Photographs by Peter Duckett or from his collection. Items not dated. .1 - illustration of a Christmas scene featuring a small open platform saloon tram on the cover and a photo of a Bendigo open combination car with an open trailer. Detailed description. .2 - Bendigo steam tram on the cover and the inside cover - photos from Peter's collection and Wal Jack collection. .3 - featuring two scenes by Peter Duckett of trams at the Easter Fair. Used for 1998 card."To Keith" in ink. and "(12/98)"trams, tramways, christmas cards, bendigo, steam trams, charing cross, easter fair, sec

Shire of Eltham Archives: Series 69, Item 5 Video opens with panning view of completed kinder from Frank Street followed by images of the centre under construction then opening day speeches. Introduction and welcome by Mandy Press (Executive Officer, Shire of Eltham) with speeches by the Hon. Pauline Toner, Member for Eltham and Shire president, Cr. Alan Baker. The Hon. Pauline Toner acknowledged Shire President Alan Baker and her parliamentary colleagues Vin Heffernan, Neil Brown and Bob Halderson and Councillors; three levels of Government which led to the achievement of the kinder, and gave special thanks to the Council and parents for the forward planning to accommodate children from babyhood to school with childcare, kinder and baby health facilities all combined in one facility in the middle of parkland in a residential area. Shire President Cr Alan Baker then followed to formally open the centre. The site had been identified in early 1985 at that stage only as a pre-school but with an opportunity to develop, the additional services were driven by Cr Baker. Though a very long name, its simple message is "Care for Kids." Designed by architect Neil Biggins of Clark, Hopkins and Clark. Cr Baker stated that the theme of "people living in the environment" was very much encapsulated by the facility. Cr Baker informed that the construction of the facility had led to some concerns with a reduction in open space and potential traffic generated to the facility and those users of the facility were asked to ensure their use is sensitive to the local residents. Cr Baker talked about the financial costs and how the Federal grant funding was no longer as plentiful as previous and that the Victorian Government had come to the assistance thanks to Pauline Toner covering some other costs as well as the ongoing running costs of around $40,000. The Federal Government contributed $233,000 out of a childcare component rather than preschool. Cr Baker thanked Mandy Press again as well as Shire Engineer, John Stanton. Cr Baker also acknowledged Ed Latanzio who was in charge of the project, along with his colleague Alan Lansdowne; Gary Bartlett and his team for the exterior surroundings to the facility. He mentioned that Neil Biggins the architect had said not many Shire Councils show the same commitment to the exterior surroundings as the interior which was a credit to the Council and Gary Bartlett. He also thanked Bev Vern, Council's preschool advisor who assisted in developing the programs; Grant Roberts from Federal Office of Childcare for assisting the Cooperative in setting up the funding program; the builders George Takola and George Apted; Michelle Matello who undertook the needs analysis that identified another preschool was required; Cathy King who assisted in the development of the childcare program; Pat Grundy and Susan Forbes, Council officers who assisted with the development of the services and the members of the preschool committee. In addition, local residents and in particular Helen, Peter and Chris who advised Council of their concerns and worked with Council to overcome these issues; members of the Interim Steering Committee and the Directors of the Childcare Co-op. Cr Baker stated that the Co-op nature of the facility and the location of the three services under one roof was unique and the task of the programs was to be led by Annie, Dianne and Lynn Afternoon tea and activities followed the unveiling of the plaque. The video shows some of the children's entertainment and their engagement as well as interior and exterior views.VHS Video cassette Converted to MP4 file format 00:26:02; 302MBshire of eltham, video recording, shire of eltham archives, eltham shire council, alan lansdowne, bev vern, bob halderson, cathy king, clark hopkins and clark, councillors, cr. alan baker, ed latanzio, eltham, eltham woods childcare co-operative, federal government, federal office of childcare, frank street, gary bartlett, george apted, george takola, grant roberts, john stanton, mandy press, michelle matello, neil biggins, neil brown, pat grundy, pauline toner, people living in the environment, susan forbes, victorian government, vin heffernan

This legging is part of a pair of leggings which presumably would have been worn by a cavalry soldier in the Royal Australian Army to protect the lower legs when riding in armed conflict. This item most likely dates to the World War One era.As an article of WWI protective clothing for use in armed conflict by a cavalry soldier, this item is of historic value. Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front, which is attached by four metallic nails. The strap then wraps around the gaiter and passes through a second leather loop at the front, which is also attached by four corroded metallic nails. This strap (along with a shorter strap that is sewn and nailed into the top of the legging) pass through two buckles at the top. Both buckles are made of brass. The straps then tuck under four final leather loops, two of which are bolted to the legging with three corroded nails. Top of legging also carries a small brass hook.legging, gaiter, first world war, world war one, world war 1, wwi, ww1, war, army, uniform, royal australian army, the great war