Colour photo: Metropolitan Hotel, Bendigo. Two storey cream coloured stone building, brown verandahs. Arched windows, stained glass just visible. 'Metropolitan' sign centre front. Power pole on corner, directly on verandah edge. Cambrian Press sign just visible on RH side, Hargreaves Street. On rear of photo: 'Aulsebrook & Martin Pty Ltd., Photographers, 6 Ruth St., Golden Square 3555 Phone 054 437565bendigo, buildings, metropolitan hotel, hargreaves street

Preprinted form on off white card, titled "Motorman's Record" contained within Reg. Item 2526, page 58, used by the SEC in the late 1930's to record the details of the Motorman's or Driver's work for the day. Notes Name, date, tramcar, time on, off, routes, trips, meter (power or electricity use), remarks and defects. See item 9124 for a 1930s SEC version. Colour copy made for display cabinet - 20-07-2011trams, tramways, sec, motormen, forms, records

Demonstrates aspects of the SEC personnel practices in giving guidance to its employees about wages, and leave entitlements and processes within the SEC itself. Would have been given to new employees.Thirty two page book, with card cover, centre stapled, titled SEC "Staff Regulations and Information". Has colour cover of Yallourn power station with, SEC logo. Gives an introduction, advice on appointments and promotions, salary accelerations and increments, education and training, leave (Recreation, sick, special and long service), classification and appeals committee rules and information. Issued by the SEC 12/1964. Full scan of document added as a pdf file 5/6/2019.On front cover "W. Chandler" in ink. Marks on paragraphs regarding leave and termination.trams, tramways, sec, staff, personnel

Ten page Foolscap, duplicated report or paper, titled "Moving People". Delivered as an address by R. J. H. Risson, Chairman, Melbourne and Metropolitan Tramways Board, August 1954. Ten sheets stapled in top left hand corner. Looks at transport in general, Melbourne's situation, road costs, rolling stock, power and labour costs, traffic congestion, costs and fares, peak load and staggering of hours. Makes references to 3 charts, not included with paper.trams, tramways, melbourne, mmtb, traffic control, tramcars

Photocopy of Report - 11 foolscap pages - titled "The Prahran and Malvern Tramways Trust - Report and Statement of Accounts for Twelve Months ending 30th September 1910" Gives listings of Trust Members and Officers, lines opened, Rollingstock, power supply problems, Finance, Operation and General matters, statistics, finance statements, balance sheet and Auditors Report. Appendices includes the Engineers and Manager's Report, Statistics, accounts, funding, auditor reports. Audited by Percy P Cook.Has the stamp of the Tramway Museum Society on the rear of the first page.trams, tramways, pmtt, reports, construction, finances, operations

Monument Hill Consolidated (Bgo.) N. L. to Miss G. Alice Jones. Pink paper dated May 10, 12 1939. Also dated 24 Aug 1939 and 2/10/39. Re North Deborah Shares. Instructions to advise on power of directors to sell these shares. Perusing Rules of Co. Letter to you advising on directors' powers to sell. Cost £1.1.0. "R677 de. 24/8/39" written in top left corner.miss g. alice jones - solicitor - account, monument hill consolidated (bgo.) n l, north deborah shares

Before the invention of spin driers around the 1950's most households had a mangle. A mangle or wringer is a mechanical laundry aid. This one is powered by a hand crank and used to wring water from wet laundry and seems to be a commercial one. This mangle is from the Orbost Club Hotel. It was used in the Club Hotel and later by Bronwen Di Bari in her art workshop.This item was used by the Orbost Club Hotel, the first hotel in the Orbost district.It was built in 1884 by Mr J.A. Petterson with the licence in the name of Mr Thomas Maguire, Mr Petterson's step-son (more information in Deborak Hall's In Times Gone By).A large commercial wooden and cast iron laundry mangle. It has two wooden trays and two wooden rollers. It was originally painted green. There are four metal casters on the bottom. It has a metal spring to adjust the tension with two tap handles.On side - EWBANK On turning wheel - 511 On wood at top - 24 X 5 1/4 (size of rollers) EMERALD laundry mangle wringer

L. Kelly Boot Repairer was located at 308 Barkly Street, Ararat, now the current site of Ararat Tyre Power (272 Barkly Street, Ararat). Old site in the early 1940s was Mr H. McMillan Garage for motor repairs. The boot repair section was rented by Laurie Kelly, then 308 Barkly Street. After World War 2 it became home of PMGBlack and white photograph of two men wearing aprons and standing at a work bench with tools. A docket featuring a shoe and a business address for L. Kelly Boot Repairer is beneath the photo.Ron Kelly, Laurie Kelly

No. 1 Pipeline heads down the mountain from McKay Power Station (the Kiewa Hydro Electric Scheme) and can be seen from the Falls Creek Rd.. The pipeline is 1635m long. It was built on the mountain rather than as a tunnel inside the mountain - "It was argued that a pressure pipeline on the surface, while not actually cheaper than the tunnel could possibly save one year in construction time.'The document is a report on the welding involved on the No. 1 pipeline. J. M. Scott was the welding inspector for the SECV on the Kiewa Hydro Electric Scheme. The book is produced by the SECV and is the 'Foremen's Guide' and includes rules and regulations across all areas.A) 10 pages of a 'field record' all pages typed on one side. Stapled on top left corner B) Small, fat book c190 pages plus appendix. Thick and 'tattered looking'. Bound by flexible 'cloth?'(linen?) and fastened with 2 rusty fasteners.B) Cover - F/M J. Scott and red SEC stamp. Inside cover: "checked ... 22-8-55" and "checked 18-11-55"j.m. scott welding inspector, no 1 pipeline mckay power station, kiewa hydro electric scheme

The upright post drill (pictured) was produced by Champion Blower and Forge of Pennsylvania, United States of America; a company that produced blacksmithing machinery from the late 19th century. The post drill is a hand-powered tool with a large flywheel, height handle, gears, spindle and chuck. It can be attached to a free-standing mount such as a post, and used by farmers and blacksmiths to drill wood, iron or steel.White bench hand drill with black wheels and cogsfarm machinery, drill, hand operated

Depicts Booyoolee Shed, which was built in 1856 and demolished in 1989. View from east side of shed. A modern version of a "stobie" pole can be seen, which was used to carry 240 volt power to shed to drive the overhead, enabling the old combustion engine to be dispensed with. Taken by John Bailey in South Australia at the request of Gael Shannon (former NWM employee).

Wal Jack had an extensive range of correspondents throughout Australia and the world who often provided him with detailed drawings and notes on various tramway systems. This drawing shows the small battery-powered (four) tramcar system in Gisborne NZ. Shows the NZ rail line, rivers and the length of each route, and the dates of operation. Based on the handwriting, prepared by Wal Jack himself. Yields information about Wal Jack's extensive recording and research work.Drawing - black, red and blue ink or colour pencil on quarto size paper of the Gisborne NZ tramway system.tramways, wal jack, drawings, maps, tramcars, gisborne nz

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0471 for another 1/8th inch hole.A number 5 stamped on the flat sideauger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0470 for another 1/8th inch hole.auger, hand drill, fencing, tool, rural trades, brace & bit

This VHS was produced by the State Electricity Commission of Victoria, to show the pristine state of the Kiewa River and Valley post the completion of the Kiewa Hydro Electricity Scheme (Circa 1950s), The late 1970s on wards was the beginning of deeper social scrutineering by pro environmental groups such as the Australian Wilderness Society (1976) and the Greens (political Party), before, during and after the construction phases of any man made structures in forest/bush areas which may or could damage or adversely affect the natural flora and fauna of sites. This promotional VHS, which was produced in the 1990s, was to project that unlike the Tasmanian State Electricity Commission (Franklin Dam issue), the Victorian State Electricity Commission acted in a way to protect the environment to the maximum level possible. With the passage of time since, and the issue of the global push to minimise carbon pollution, and as an alternative to coal fired power stations, the use of hydro electricity can now be seen as a highly efficient alternative to "coal powered" electricity. This VHS is a snap shot in time (1990) when the Kiewa Valley was still relatively under populated and holiday houses owned by city bound workers was still relatively insignificant. As more and more holiday makers retire to a small but friendly region(Kiewa Valley and Mount Beauty) the increase in visitor numbers will affect the local rural bush scene more and more. The changes that will occur (in time) can be measured against the scenes presented in this video. The additional resources provided by the State Electricity Commission of Victoria of "alpine bush" fire control and management, together with an ongoing educational scheme for school children in learning about what constitutes the Alpine country's unique environment, are a very important offshoot, benefitting to both the communities within the Kiewa Valley and regional Victoria.This VHS tape is stored within its own plastic cover which has a front side covered by a coloured photograph(both front and back cover) of the Kiewa River, just to the north east of the Mount Beauty township. The VHS tape is nestled within a formed inner structure which not only prevents the tape from moving to and fro but also unnecessary intrusion of foreign particles.Front cover "KIEWA" on the spine top circle with lines projecting out and below this "SEC". Middle of spine "KIEWA" and bottom of spine "VHS"secv, kiewa valley, dale-bromley, cy-duff, chris- harding, michael-glucz, forestation education, wilderness photography, nature film.

Features a photo of a cooking lesson in Electra Hall and the Mayor of Ballarat driving No. 30, following its conversion to the Ballarat style of trams in September the previous year at the time of the inauguration of the new rolling stock. Notes the progress in Ballarat in the last 18 months, reconditioning of the tram lines, the "new" trams, the changeover from DC to AC, new sub-stations, distribution networks and electrical development, including work at the power station. Has an "Important Notice" advising readers of the scope of the Departmental Journal "CONTACT" and its relationship with the social and sporting activities magazine "SEC MAGAZINE". See Reg Item 3011 for a print of the photo of No. 30. Record revised 3/4/2019 to add digital images with those from Andrew Cook CD and to include an item titled "A Page from Geelong" about a fractured pole, two minutes of silence and the impact on power generation and a thankyou letter. Demonstrates the reporting and promotion of SEC activities to its staff and public in Ballarat.Photocopy of an article in the State Electricity Commission of Victoria Magazine, Contact, Vol 1, No. 1, May 1936 titled "Progress in Ballarat". trams, tramways, sec, ballarat, electricity supply, tramcars, power station, electra hall, geelong, poles

“Yarram Park” Willaura Visited by American Seamen. Gentleman is Mr William Jennings Kinsella. The Great White Fleet was the popular nickname for the group of United States Navy battleships which completed a journey around the globe from December 16, 1907 to February 22, 1909 by order of President Theodore Roosevelt. Its mission was to make friendly courtesy visits to numerous countries while displaying new U.S. naval power to the world. One goal was to deter a threatened war with Japan since tensions were high in 1907. It familiarized the 14,500 officers and men with the logistical and planning needs for extended fleet action far from home. Hulls were painted a stark white, giving the armada its nickname. It consisted of 16 battleships divided into two squadrons, along with various small escorts.[1][2] Roosevelt sought to demonstrate growing American military power and blue-water navy capability.willaura simmons

“Yarram Park” Willaura Hunting Trip with American Seamen. Gentleman at top center back is William Jennings Kinsella. The Great White Fleet was the popular nickname for the group of United States Navy battleships which completed a journey around the globe from December 16, 1907 to February 22, 1909 by order of President Theodore Roosevelt. Its mission was to make friendly courtesy visits to numerous countries while displaying new U.S. naval power to the world. One goal was to deter a threatened war with Japan since tensions were high in 1907. It familiarized the 14,500 officers and men with the logistical and planning needs for extended fleet action far from home. Hulls were painted a stark white, giving the armada its nickname. It consisted of 16 battleships divided into two squadrons, along with various small escorts.[1][2] Roosevelt sought to demonstrate growing American military power and blue-water navy capability.willaura simmons

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Dust explosions are the result of high concentrations of combustible dust particles rapidly combusting inside an enclosed space. When mixed with oxygen these fine particles can ignite when in contact with a spark, metal ember, cigarette butt or other source.Wooden box with metal edges on top. Chrome handle and indicator buttons for Power, Air, Compression, Spark. Hinged front section that opens to show contents. Electrical Engineering lecturer Graeme Hood remembers Paul Brass demonstrating this unit to show how dangerous a combination of dust and electricity it. The demonstration would take about 1 minute, and would culminate with a loud bang which would make everyone jump. This item was probably last used by Paul Brass.viosh, victorian institute of occupational safety and health, dust explosion, combustible dust particles, enclosed space, spark, ember, cigarette, oxygen

Possibly made by the donor.This object is an example of trench art. .1 The lamp base consists of a chrome plated deactivated mortar bomb attached to a turned brown wooden base. A globe and switch socket are attached to the tip of the bomb. An electrical cord with power plug is threaded through the base of the bomb. .2 The lampshade is made of stiffened brown paper laced to a wire frame with dark brown cord. Handpainted coloured flowers decorate the outer surface of the shade. The shade is attached to the globe via a wire clamp.On the base of the mortar bomb: ' ?LB, IM, MF, 1940'ornaments, lighting - electrical, trench art, souvenir

Bullock drays were commonly used to transport heavy loads, such as the wool clip from a large property, across long distances.In the 19th century. The yoke is worn on the neck of the bullocks and is secured by a belt around the neck. The bullocks push the yoke with their shoulders, hump and neck; therefore, the work is performed.This yoke seems to be handmade on a farm. It was used in the Kiewa ValleyA wooden bar behind a harnessed horse. It is used to balance the pull of a draught horse or other draft animal (bullock) when pulling a vehicle like a plough. A yoke is an interface between bullock power and actual work to be performed.This yoke is timber with a shape to form curved depressions that allow it to rest across the necks of two bullocks to keep them together.The bullocks were chained to the steel oblong ring - one at each end of the yoke. The middle ring was attached to the bullock or vehicle in front of them.bullock yoke, swingletree, farm equipment, plough

1. Companies Act Golden Transverse. 2. Agreement Walter Perry Ham/Golden Traverse. 3. Agreement John Taylor/Golden traverse. 4. Power of Attorney Kohn Taylor/Rupert Graeme Bruce Skinner. 5. Certificate of incorporation Golden Traverse (Nov. 1940). 6. Letter re listing on stock exchange 6.2.1941. 7. Applications for shares - Ham & Reid. 8. Receipt for shares (pounds)14985 (Commonwealth of Australia). Golden Traverse No Liability.MCCOLL RANKIN & STANISTREETorganization, business, industrial - mining, mccoll rankin & stanistreet

Black and White Photo, Rifle Brigade Hotel - Christenses, Next to the Rifle Brigade Hotel is J. Power Wine & Spirits Store, Opposite the Hotel and the Wine and Spirits Store on the corner of Rowan and View Streets is the Painter and Paper Hanger - Hodgson Bros Buildings painters and paper hangers Venetion makers, Large Factory, in centre top of photo has the lettering 'City Foundry' painted at the top of it, Markings on rear of photo say 'Rifle Brigade Hotel', 'Corner of Rowan and View Streets 1876'.buildings, commercial, rifle brigade, rifle brigade hotel, view street, rowan street, corner of view and rowan sts, crn of view and rowan sts, city foundry, hodgson brothers, hodgson, christenses, j power

Document. The Salvation Army, Blood and Fire, The Y.P.Anti-Smoking and Gambling League. Believing Cigarette and Tobacco Smoking and Gambling among lads to be most harmful to their moral and bodily well-being, I hereby enlist in this Legion, promising , by the help of God, to do all that Iies in my power to persuade others from using Tobacco, and from Gambling in any form; also to have nothing to do w th the habits myself. Signed................. Date................ Form No.111. 20m---12-09.organisation, community, abstinence society