This booklet was prepared for the East Gippsland Shire Council in August 2001.A Thematic Environmental History identifies how key patterns of development have influenced the culture of the area and the natural and built environment. The document is not a social history but usually provides the context for future heritage studies and assessments and would provide input to the preparation of a Heritage Action Plan. This booklet prepared for the East Gippsland Shire councilA spiral bound book of 75 pp, titled Thematic Environmental History, prepared by Meredith Fletcher and Linda Kennett for the Centre for Gippsland Studies, Monash University, Gippsland Campus. On the front cover is a black and white drawing of a paddle steamer towing a barge along a river. It contains information on the discovery, settlement and land usage of East Gippsland as well as the development of transport, communication and cultural institutions. Copywright held by East Gippsland Shire Council and Department of Infrastructureenvironmental-study-east-gippsland

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

On Friday 16 August 2002, a truck carrying the tower crane counterweights from the 4th residential tower in Beach Street, entered Princes Pier to turn around and fell through the decking. The area was fenced off and a year later on 18 November 2003 the truck was extricated by a crane on a barge. The hole was covered by a steel box like structure until the Pier was renovated at a later date.piers and wharves - princes pier

Boat fenders are designed to protect against damage caused by boats, docks or moorings knocking into other objects. The Coir boat fenders can absorb the impact, acting as a bumper. The design is similar to fenders used for narrow boat fenders or on canal boats, barges, workboats and moorings. Feners are available in round and oblong boat shapes in many sizes today.Fenders are marine equipment used to protect the sides of water vessels and to buffer them against daming from their moorings or each other. The knot and rope work used to make the covers of these fenders is a skill learned by many mariners and passed down through generations. Seafarers on 18th-to-20th-century sailing ships found many uses for this handcraft.Fenders, set of four; balls made from Coir or hessian material and covered with knotted rope. Each has a rope loop..warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, fender, knotted rope, buffer, coir, rope fender, round fender, boat protection, marine equipment, handmade fender, rope work, knot making

The photograph shows men unloading goods, including a sack, from a ketch moored at Marlo. Marlo was once a very busy port. Goods needed by the early settlers were carted by sea-going vessels to Marlo. At the Marlo wharf goods were unloaded from the large vessels onto barges and towed by paddle steamers to Orbost. (information - In Times Gone By - Deborah Hall)This is a pictorial record of shipping at Marlo.A black / white photograph of men unloading goods from a ketch into small boats. on back - "ketches being loaded at Marlo"marlo-transport marlo-jetty shipping

Metal stencils were predominately used in the late 1800s to mark wool bales with sheep station identifiers. This stencil is a good example of the types of hand-marking that took place in the industrial landscape of Echuca, where bales were transported from nearby stations to places around Australia using the barge system that the Port has captured in its exhibition precinct to date.This item is in excellent condition and adds to the interpretative capacity of the Port Echuca collection. Small rectangular flat metal stencil with letters XBRED cut out.XBRED port of echuca, stencil

Moving Cocks Pioneer Barge, c1930s. Cocks Pioneer Electric Gold & Tin Mine Company was formed in 1899. The company's first power station, located at the eastern end of the valley began operating with its 340 Kilowatt steam-powered generator. By 1909, from 2,500,000 cubic yards worked, reported recovery was 17,284 ounces of gold and 224 tons of tin ore. By 1909, Cocks Pioneer’s power plant had become inadequate and uneconomical. The barge was floated downstream about a mile, but lost time caused the operations to cease. Following testing, a new mine was established by diverting Reid's Creek at a cost of £25,000. Settling dams were built, one of which held 1,935,900 cubic feet. Sold earth banks, built against a wall of stringy bark saplings constructed and laced with vertical props, were built. In 1914, the company was reformed as Cock’s Pioneer Gold and Tin Mines NL, another power station was constructed at the western end of the township, near the junction of Clear and Reid's Creeks. From 6,800,000 cubic yards of material processed, the returns were 64,397 ounces of gold and 855 ton of tin. Cocks Pioneer mine then moved the barge downs stream and continued sluicing. In 1929 Cocks Pioneer Electric Gold and Tin Mining Company ceased operations due to a drop in values. Cock’s Pioneer Gold and Tin Mines NL carried on large-scale hydraulic sluicing operations until 1941. mines, mining, gold, tin, gold mining, tin mining, men, miners, barge, sluicing, hydraulic, cocks pioneer, el dorado, eldorado

The P.S Canally was built in 1907 by R.W. Beer. Known as the "Greyhound of the River" after her original engine was substituted with a Railway locomotive, minus the wheels.The speed of the Canally set up tremendous wash, which sank any small craft. In 1929 it was sold to N. Collins who converted it to a barge. The Chislett Brothers were the owners when the P.S Canally sank at Boundary Bend in 1962. (Ref . Parsons R. "Ships of the Inland Rivers." P.58.)The P.S.Canally is significant because it was fitted with a locomotive, minus the wheels. This is significant because it shows the need for the paddle steamers to travel fast. This could show the competitiveness of the paddle steamer trade on the river in the early 20th Century. A small black and white photograph of an old photograph of the P.S Canally in the middle of the river. The paddle steamer is travelling towards the camera. p.s canally, beer, r.w., chislett brothers, collins, n.

This book was written by Ian Winchester, the grandson of James Winchester, early settler in Marlo, who worked with Alan Richardson. The book is dedicated to those who colonised the Snowy River. James Winchester was born in Geelong in 1856. He first sailed into Marlo, aged 15 and returned in the 1870's. he worked on the snagging punt on the Snowy River and also on the Paddle Steamer Curlip which towed the barges to collect the maize grown along the Snowy River.This book is a useful reference on the history of the Paddle Steamer Curlip.A thin, 22 pp, stapled paperback book, titled "P.S. Curlip & The Snowy River". It has a cream cover with a b/w photo of the Paddle Steamer Curlip in the centre. Print is black. It contains a history of the Curlip built by Samuel Richardson and is written in verse. There are b/w photographs and sketches.On front page -stamped "Orbost & District Historical Society"winchester curlip snowy-river

Has recently been framed and laminatedFramed list of pennants signifying ships and signals hand drawn with coloured pencil in 1915 on paper. Later corrections made in 1933 in black penM. H. T./SIGNALS/FOR THE USE OF FLOATING PLANT OCT 1915 1915/Corrected Feb 1933/ HUME/ J. A. BOYD/WILLIAM PITT/WILLIAM STRONG/CHAS DUCKETT/EDWARD NORTHCOTE/ H C PIGGOTT/BATMAN/FAWKNER/FRANCIS DUNCAN/WILLIAM ANDREWS/COMMISSIONER/PENGUIN (at Geelong)/ RED BIRD/GELLIBRAND/MOTOR BOAT NO 2 TATEGAMI/MOTOR BOAT NO 3/MOTOR BOAT NO 4/ENGINEER/HARBOR MASTER/LADY STANLEY/HOVELL/ W. S. MOUNTAIN/W.M. COWPER/G.F.H./D. YORK SYME/ SUPER of DREDGING/ASSISTANT/HARBOR MASTER/SUPER of MACHINERY/ELECTRICIAN/INSP of DREDGING/INSP of MACHINERY/INSPECTOR WHARVES/(F WILLIAMS)/INSPECTOR DOCKING/& SHIPWRIGHTS/DIVERS WANTED/ACCIDENT SEND/MEDICAL ASSISTANCE/WAITING FOR/EMPTY BARGES/DREDGING STOPPED/WEATHER UNFAVOURABLE/TAKE AWAY/EMPTY BARGES/TUG WANTED/DERRICK PUNT/WANTED/TAKE DERRICK/PUNT AWAY/TAKE AWAY/COAL BARGE/BUCKETS FOULED/OBSTRUCTION SEND/DERRICK PUNT &/DIVERS/ DREDGING STOPPED/REPAIRING/DREDGING RESUMED/ B. Harris 16.8.15/ Drawing No 3415melbourne harbour trust (mba)

Three copies -Sepia photograph showing dunes, houses and Works buildings and boats at the entrance to Gippsland Lakes from ocean - Bass Strait. Photo shows two PWD houses on left and small school building, plus other Works buildings. Flagstaff on dune above houses. Large barge on left in front of houses. Large passenger steamer at New Works wharf with people waiting, has flags and bunting, two masted ketch on right of rock groynes. Lakes Entrance Victoriajetties, boats and boating, settlement, historic site

This image is one of a series of photographs taken by Melbourne based photographers Stevenson and McNicoll who visited Bacchus Marsh and its nearby districts between September and November 1883. The house in the image is located at 82 Main Street Bacchus Marsh and as of 2024 is still occupied as a residence. The house was built in 1860 by William Watson for William Grant who leased the property to various tenants. From 1867 it was mainly leased to local doctors. The property stayed in possession of the Grant family for many years after this and was leased to many residents of Bacchus Marsh. The identity of the people in this 1883 photograph has not been established.Small sepia 'carte de viste' style unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll'. The photo shows a single-storey brick cottage with a shingled hip roof with two chimneys visible. The cottage has a verandah with an ornamental barge board and pillars and a picket fence. Standing on the footpath are two women and two young girls. On the verandah of the house stands another woman holding a baby. Printed On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE. stevenson and mcnicoll 1883 photographs of bacchus marsh and district, houses bacchus marsh, william watson builder bacchus marsh

Upon mechanisation in December 1941, 20th Light Horse (Victorian Mounted Rifles) was re-titled 20th Motor Regiment (Victorian Mounted Rifles). It was equipped with Bren Gun Carriers and deployed to airfield defence in Northern Territory. In 1943, the Regiment was deployed to Merauke, Dutch New Guinea, where it conducted patrols along the coast and up rivers using barges and canoes. Returning to Australia in April 1945, the Regiment was redesignated 20th Pioneer Battalion then disbanded several months later at the end of the war. Good quality reproduction.Khaki woollen tunic with colour patches of 20th Motor Regiment. Metal 'Australia' shoulder titles, metal Rising Sun collar badges and metal buttons.20th motor regiment, uniform

The old Church House served the Bruthen community in 1880s when no longer required it was barged to the New Works area where it became Church and meeting hall. By the time the Entrance work was completed the contractor J R Coate had the building moved to Church Street Lakes Entrance. It was a home for various local families until abandoned then acquired by Val Northrope. After renovation by Val in Lakes Entrance it was moved again to a site beside the Northropes new home at Tambo UpperColour photograph of timber cottage surrounded by picket fence four women at gateway. Cottage situated near Bruthen Victoria. Also eight more colour photographs taken of same house showing various aspects of building. houses, land settlement, churches

This certificate was issued on January 30, 1903 to Captain Alan Richardson by the Marine Board of Victoria entitling her to carry 25 passengers and only 10 passengers when engaged in towage service. Two children under 12 years of age to be reckoned as one passenger. The penalty of 20 pounds would be levied if these limits were exceeded. the certificate was valid until 21st July 1903. The original Paddle Steamer Curlip was built by Sam Richardson and his sons Mark, Albert and Frank, at their sawmill at Tabbara, a pioneering settlement on the Brodribb River, a tributary of the Snowy River. Curlip's keel was laid on 14th October 1889 and PS Curlip was launched in 1890. The Paddle Steamer Curlip was designed to travel up and down the Snowy and Brodribb Rivers with essential supplies from coastal ketches and schooners, that plied their trade up and down the coast between Melbourne, Sydney and Tasmania. The Curlip regularly towed one or two barges and up to five barges loaded with local farming produce and timber for the thriving cities, that was loaded offshore or in the Snowy River estuary, tide and depth permitting, on to the trading vessels.This item is associated with the P.S. Curlip and the Richardson family, early Orbost pioneers.A paper passenger certificate for a river steam ship.Details are handwritten in black and red ink.curlip-p.s. certificate-passenger richardson

The paddle steamer P. S Pevensy appears to still be a working steamer in this photograph. The boat seems a bit dishevelled and the workers are doing repairs on her, while she is still steaming up the river. If this photograph was taken in 1950, that would have been well before the development of the Tourism Industry in the Murray Darling area. This would explain the number of workers and the fact that they were doing maintenance while the Paddle Steamer was still working. She does not appear to be towing a barge, but a large tarpaulin could be covering a load for transport. This picture holds significance because it shows a paddle steamer in use before the Tourism Industry had developed in the Murray Darling region. The paddle steamer which now carries passengers every day has been renovated to cater for passengers cruising up and down the river. Here is this photograph the P.S Pevensy looks a bit dishevelled and untidy.This is a black and white rectangular photograph of the P.S Pevensey. Four people can be seen painting the wall of the cabins on the upper deck. A person can also be seen kneeling on the back deck working on something lying on the back deck. A wooden boat is nearby, also on the back deck. The boat is steaming and appears to be moving upstream. There is along pole at a 45 degree angle attached to the very front of the paddle steamer.On the front of the photograph written on the paddle steamer can't be seen the words "PEVENSEY. Melbourne." Written on the back of the photograph in lead pencil " M4414-17. K4". p.s pevensey, paddle steamers

This photograph shows the Richardson family having a picnic on the verandah of Captain McNeil' house at Marlo - April 1897. Snowy River Shipping Company formed in 1880. They were soon shipping produce (mainly vegetables) from the area to Melbourne. The Snowy River Shipping Company was formed by Mr Henry James during the 1880s, with Captain McNeil as master. Captain Hegarty was the shipping agent at Marlo. Towing a line of small barges these paddle steamers plied their trade between the port of Marlo, and the farms along the river banks, churning their way almost twenty miles upstream to a landing beside what is now Frank Richardson’s property. On these trips, the barges carried mail and supplies to the townspeople and farmers, loading their produce, mostly maize, on the return trip to the coast. The coming of the railway in 1915 spelt the end for the little river boats. ( ref. F. W. RODWELL in the “Snowy Review”) Frank Richardson 1877-1950 was a sawmiller at Tabbara and helped build and run paddle steamer "Curlip"as engineer. Captain McNeil was an always cheerful Marlo identity and local children had many times sailing with him on the river. Captain McNeil with tug went out through the entrance and brought in the schooners.This item is associated with the Richardson family, early settlers of the Orbost district.A black / white photograph of a group of people having afternoon tea on the end of a verandah of a wooden house. All are seated.on back - " The Richardson family picnic at Marlo"richardson-family-orbost-marlo mcneil-captain

This photograph dating between the 1850s and early 1900s depicts an open cut sluicing site located in Allan's Flat looking upon the open cut from Staghorn Flat Number 1. Sluicing was undertaken in the area from 1850 to 1904. The image depicts a location mined by Yackandandah Sluicing Co. It portrays and open space with pipes laying on the ground and connected to pipes leaving the barge. These pipes were used to wash and seperate the qaurtz. There are two small buildings on high ground over looking the barge. Yackandandah Sluicing Co. was created by J.A. Wallace in the 1880s. The Yackandandah Sluicing Co. operated from the mid-1880s to the early 1900s, when resources eventually ran out. Open cut sluicing involved the use of high-powered hoses which used the centrifugal sand pump system (known as hydraulic sluicing) which broke down the soil which was then processed for quartz, gold and other materials. After the resources where drained, Wallace reaped the benefits of his mining business. Allan's Flat is located on the Yackandandah Creek, and is 10km north-east of Yackandandah and 20km south of Wodonga in Victoria's regional north-east. Allan's Flat was initially used to mine gold through alluvial methods, however that came to an end with little results. The mining business was then revived by J.A. Wallace with the introduction of hydraulic sluicing.The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray an open cut sluicing site can reveal important information for society and technology for the date when the photograph was taken. This image is of important historical significance for its ability to convey information about sluicing and the methods used to find gold and other minerals in the lat 19th Century. It also shows a location where sluicing was undertook which provides insight into the impact of sluicing on the environment at a time when it was done. This image is important for current research into the history of Allan's Flat, a small regional location near Yackandandah in Victoria's North East. Therefore, this image has the capacity to be beneficial for research into society and the motivations of those living and working in this region during this period and therefore, has social significance. The Beechworth Burke Museum has additional images relating to gold sluicing and Allan's Flat which can be analysed and studied alongside images like this one.Sepia coloured retangular photograph printed on gloss photographic paper mounted on board.Revers: Sluicing at Allan's Fortallan's flat, north east gold, sluicing, gold sluicing, hydraulic sluicing, mining, gold and quartz mine, beechworth, burke museum, yackandandah

Cocks Pioneer Electric Gold & Tin Mine Company was formed in 1899. The company's first power station, located at the eastern end of the valley began operating with its 340 Kilowatt steam-powered generator. By 1909, from 2,500,000 cubic yards worked, reported recovery was 17,284 ounces of gold and 224 tons of tin ore. By 1909, Cocks Pioneer’s power plant had become inadequate and uneconomical. The barge was floated downstream about a mile, but lost time caused the operations to cease. Following testing, a new mine was established by diverting Reid's Creek at a cost of £25 000. Settling dams were built, one of which held 1,935,900 cubic feet. Sold earth banks, built against a wall of stringy bark saplings constructed and laced with vertical props, were built. In 1914, the company was reformed as Cock’s Pioneer Gold and Tin Mines NL, another power station was constructed at the western end of the township, near the junction of Clear and Reid's Creeks. From 6,800,000 cubic yards of material processed, the returns were 64,397 ounces of gold and 855 ton of tin. Cocks Pioneer mine then moved the barge downs stream and continued sluicing. In 1929 Cocks Pioneer Electric Gold and Tin Mining Company ceased operations due to a drop in values. Cock’s Pioneer Gold and Tin Mines NL carried on large-scale hydraulic sluicing operations until 1941. gold, tin, mining, sluicing, gold mining, tin mining, cocks pioneer, el dorado, eldorado

Cocks Pioneer Electric Gold & Tin Mine Company was formed in 1899. The company's first power station, located at the eastern end of the valley began operating with its 340 Kilowatt steam-powered generator. By 1909, from 2,500,000 cubic yards worked, reported recovery was 17,284 ounces of gold and 224 tons of tin ore. By 1909, Cocks Pioneer’s power plant had become inadequate and uneconomical. The barge was floated downstream about a mile, but lost time caused the operations to cease. Following testing, a new mine was established by diverting Reid's Creek at a cost of £25,000. Settling dams were built, one of which held 1,935,900 cubic feet. Sold earth banks, built against a wall of stringy bark saplings constructed and laced with vertical props, were built. In 1914, the company was reformed as Cock’s Pioneer Gold and Tin Mines NL, another power station was constructed at the western end of the township, near the junction of Clear and Reid's Creeks. From 6,800,000 cubic yards of material processed, the returns were 64,397 ounces of gold and 855 ton of tin. Cocks Pioneer mine then moved the barge downs stream and continued sluicing. In 1929 Cocks Pioneer Electric Gold and Tin Mining Company ceased operations due to a drop in values. Cock’s Pioneer Gold and Tin Mines NL carried on large-scale hydraulic sluicing operations until 1941. mines, mining, tin, gold, tin mining, gold mining, sluicing, cocks pioneer, el dorado, eldorado