Showing 3953 items
matching engines
-
Lara RSL Sub Branch
Picture Print, Hurricane, Unknown
The Hawker Hurricane is a British single-seat fighter aircraft of the 1930s–40s that was designed and predominantly built by Hawker Aircraft Ltd. for service with the Royal Air Force (RAF). It was overshadowed in the public consciousness by the Supermarine Spitfire's role during Battle of Britain in 1940, but the Hurricane actually inflicted 60 percent of the losses sustained by the Luftwaffe in the engagement, and it went on to fight in all the major theatres of the Second World War. Url Hurricane.html. The Hawker Hurricane Mk.IIc - LF363, first flew on the 1st January 1944 and is believed to be the last Hurricane to enter service in the RAF. It was in service with 63 squadron and 26 squadron. After hostilities, LF363 was spared the scrap yard and used on various station flights and also appeared in films 'Angels one five', 'Reach for the Sky' and 'The Battle of Britain'. Whilst flying to Jersey in September 1991, LF363 suffered engine problems and had to be diverted to RAF Wittering but on the final approach the aircraft suffered complete engine failure and had to make an emergency landing. The pilot was saved with relative minor injuries (a broken ankle and minor burns) but the aircraft suffered severe damage. Historic Flying Limited completely rebuilt LF363 and by 1998 it was flying again as part of the B.B.M.F. LF363 currently wears the colour scheme of a Mk.I Hurricane of 17 squadron, P3878 'YB-W' which was flown by Flying Office Harold Bird-Wilson at Debden and Tangmere. Harold 'Birdy' Bird-Wilson had previously been badly burned in a pre-war flying accident. Upon his recovery he joined 17 squadron and fought through the 'Battle of France' and the 'Battle of Britain' achieving 6 confirmed kills. On 24th September 1940, 'Birdy' was shot down by Adolf Galland, his 40th 'kill', and had to bale out. 'Birdy' survived the war and when he retired from the RAF he had reached the rank of Vice Marshall and had been awarded the CBE, DSO, DFC & Bar and the AFC & Bar. British single-seat fighter aircraft manufactured by Hawker Aircraft, Ltd., in the 1930s and ’40s. The Hurricane was numerically the most important British fighter during the critical early stages of World War II, sharing victory laurels with the Supermarine Spitfire in the Battle of Britain (1940–41) and the defense of Malta (1941–42). Hurricanes served in all theatres of war where British forces were engaged. https://www.britannica.com/technology/Hurricane-airplane Framed coloured picture print on plastic sheetOn the aircraft are the markings LF 363 -
Puffing Billy Railway
Victorian Railways 2'6" Transporter wagon 129Q, 1926
The Q class were introduced as bogie flatwagons in the 1870's. Large Q wagons as shown were built to the 1920's In the early 1900's, some Q wagons were modified for Pintsch Gas traffic with a small pump motor cabin at one end and a tank for carrying the gas. Other conversions for traffic were as required. Examples were: sheet glass, skeletal underframes between workshops In 1926 the railways built two narrow gauge Garratt locomotives. As normal wagons were unsuitable for moving these locomotives a special skeletal wagon was built. The engines were split into units for transportation. It featured axle bearings and boxes from steam engines, had hinged buffers that could drop out of the way during loading/unloading. It also featured 'strap' rail along the deck. The wagon was Q 129. This wagon was also available for general narrow gauge rolling stock. Q wagons were numbered from 1 to 136. Service History: *Q 129.VA - 1/ 6/1926 NWS Built new H/brake & drop buffers. For traffic of Narrow Guage stock 31/ 1/1931 NWS Into Workshops - 16/ 6/1931 NWS Out of Workshops (50 days) 6/11/1931 NWS Into Workshops - 27/11/1931 NWS Out of Workshops (22 days) 24/ 8/1936 NWS Into Workshops - 10/ 9/1936 NWS Out of Workshops (18 days) 27/11/1936 NWS Into Workshops - 26/ 2/1937 NWS Out of Workshops (Light repairs) circa 1960 - Photograph SL20 p32, loaded with 7NA / /1975 - Photograph #393 / /1976 - Photograph #553, #554 19/ 3/1979 - Condemned - 10/ 4/1979 - Off Register - 10/ 4/1979 - Sold (to) ETR, Belgrave / /1989 EME Body [GRE]. [SXC]: 29/3/92, MEL127E5, Puffing Billy at station Historic - Victorian Railways - Transporter wagon used to carry and transfer 2' 6" Narrow gauge rolling stock over Victorian broad gauge (1,600 mm (5 ft 3 in) main lines to the narrow gauge lines. Q 129 was unique, it was built to transport narrow gauge locomotives. Transporter Wagon made of Steel and wrought Iron129Q129q, puffing billy, transporter wagon -
Puffing Billy Railway
Lathe - Gap Bed, early 1900s
Possibly ex Victorian Railways Newport workshops Supplied by Bevan & Edwards Machinery Merchants, Melbourne Sebastian Lathes Described by its makers as the Utility School, Garage and Repair-shop Lathe, the machine immediately below, a Sebastian 15" (circa 1910 - 1926) was the Company's cheapest offering and, in its basic form, lacked a compound slide rest, the tailstock did not set over for taper turning and the bed lacked a gap. However, a friction-type countershaft unit was included in the price as well as a tool post, faceplate, drive plate, changewheels for screwcutting and a small tool kit. As with modern cars (especially BMW) everything worthwhile was on the options' list and by spending more it was possible to specify all those small but important extras. Although in its lowest-cost form this model was reduced to the fundamentals required for a useable, screwcutting centre (engine) lathe it was still reasonably specified and would certainly have fulfilled many requirements when installed in a school or training workshop. The true swing was 15.25", it was properly backgeared and screwcutting was through a conventional tumble-reverse mechanism that allowed both left and right-hand powered movement to the carriage by altering the position of just one lever. As standard it accepted 40" between centres, but any capacity could be ordered, in foot intervals, up to a maximum of 88" - when it is hoped that a central bed support might have been included …… The spindle, which ran in white-metal bearings, had a useful 15/8" hole and a No. 3 Morse taper centre. Some models appear to have had the leadscrew clasp-nut lever on the right-hand side of the apron, while on others it was positioned to the left.. Early Sebastian 13-inch lathe Typical of the Centre or "Engine" lathe made by many manufacturers from the late 1800s until the late 1930s, the basic flat-belt drive Sebastian, with separate countershaft, was eventually relegated to the economy end of the Company's range by the introduction of geared headstocks and self-contained motor-drive systems.Historic - Industrial Machinery - Gap Bed Lathe - Possibly ex Victorian Railways Newport workshops - Purchased and supplied from Bevan & Edwards Gap Bed Lathe - Grey with raw steel parts and a timber cupboard with gears and tools. Bevan & Edwards PTY,LTD Machinery Merchants Melbourne (possible government tag) 365bevan & edwards pty,ltd machinery merchants melbourne, puffing billy -
Puffing Billy Railway
Zeehan & North East Dundas Tramway Bogie 1896, wagon bogie, 1896
Zeehan & North East Dundas Tramway Bogie 1896 The North East Dundas Tramway (NEDT) was a 2 ft (610 mm) narrow gauge tramway on West Coast Tasmania that ran between Zeehan and Deep Lead (now Williamsford). It was part of Tasmanian Government Railways. The line was opened in 1896 to carry ore from the Williamsford mines to Zeehan where it would be loaded onto another train for shipment to Burnie. The narrow-gauge (2 ft) was chosen because of the extremely difficult terrain that the railway crossed, requiring several big trestle bridges, including one at the foot of Montezuma Falls. After some rain the engine and carriages would get soaked by spray from the falls. There was a break-of-gauge with the mainline 1,067 mm (3 ft 6 in) system at Zeehan. The railway was closed in 1932. The rolling stock for the Tramway was built in the Launceston Railway workshops, and comprised twenty five eight-wheel low-side trucks, tare 3 tons 1 cwt. 1 qr., load 10 tons; six eight-wheel flat trucks, tare 2 tons 18 cwt. 1 qr., load 10 tons; two four-wheel bolster trucks, for carrying long timber, tare 1 ton 19 cwt., load 5 tons; and four passenger cars, each with six cross-seats with reversible backs, to carry eighteen passengers, also a locker for mails and parcels. All trucks and cars have cast-steel wheels 21 inches in diameter and are fitted with automatic vacuum brakes. The trucks have side levers and the cars have hand-screw brakes. The vacuum brake can be worked from the engine or from the passenger cars, which act as brake vans. When this brake was introduced, one effect was to accelerate the journey speed by about 10 minutes owing to more even running on down gradients. Historic - Industrial Narrow Gauge railway - Bogie used on the Zeehan & North East Dundas Tramway, Tasmania, Australia Bogie made from steel, iron and wrought ironZN & NTDS ML TRAM 1896 Griffinpuffing billy, bogie, zeehan & north east dundas tramway bogie, zeehan & north east dundas tramway, industrial narrow gauge railway, gauge: 2' (610 mm) -
Eltham District Historical Society Inc
Photograph, George Coop, Fire damaged Wilhelmsen Line ship Tomar at Victoria Dock, Melbourne, Jan. 1968
When George Coop and wife Helen following several years teaching in Canada, they bought a passage aboard the Wilhelmsen line cargo ship, Tomar departing Oslo, Norway for Melbourne, Australia. Whilst crossing the Bass Strait near Robe, South Australia, a generator in the engine room caught fire threatening the ship's fuel oil tanks, forcing the Captain to order the 43 crew and 8 passengers to abandon ship. They spent many hours in a lifeboat before being rescued. This photo was taken when the ship was brought up to Victoria Docks (No. 26 South Wharf) where George and other passengers were allowed to retrieve their luggage. The ship was then taken to Kaohsiung, Taiwan for scrapping. See also https://www.shipsnostalgia.com/media/tomar.450919/ http://www.shipspotting.com/gallery/photo.php?lid=2726028 http://www.shipspotting.com/gallery/photo.php?lid=2961287 https://www.flickr.com/photos/wheelhouseno/8131145299Digital TIFF file Scan of 35mm Kodak Plus-X Pan black and white negative transparencygeorge coop collection, tomar (ship), victoria docks, wilhelmsen line -
Eltham District Historical Society Inc
Photograph, George Coop, Fire damaged Wilhelmsen Line ship Tomar at Victoria Dock, Melbourne, Jan. 1968
When George Coop and wife Helen following several years teaching in Canada, they bought a passage aboard the Wilhelmsen line cargo ship, Tomar departing Oslo, Norway for Melbourne, Australia. Whilst crossing the Bass Strait near Robe, South Australia, a generator in the engine room caught fire threatening the ship's fuel oil tanks, forcing the Captain to order the 43 crew and 8 passengers to abandon ship. They spent many hours in a lifeboat before being rescued. This photo was taken when the ship was brought up to Victoria Docks (No. 26 South Wharf) where George and other passengers were allowed to retrieve their luggage. The ship was then taken to Kaohsiung, Taiwan for scrapping. See also https://www.shipsnostalgia.com/media/tomar.450919/ http://www.shipspotting.com/gallery/photo.php?lid=2726028 http://www.shipspotting.com/gallery/photo.php?lid=2961287 https://www.flickr.com/photos/wheelhouseno/8131145299Digital TIFF file Scan of 35mm Kodak Plus-X Pan black and white negative transparencygeorge coop collection, tomar (ship), victoria docks, wilhelmsen line -
Eltham District Historical Society Inc
Photograph, Steam locomotive K-158 at the coal hopper, Echuca Railway Station, November 1963, 1963
THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so. Image dated as November 1963 based on same image in Port of Echuca collection (possibly frame 32 of film) (print 19.5 x 24.5cm) On reverse in pencil: " K Class at Echuca" Echuca K Class. 1940-1968". In blue pen:" Photo by: George L. Coop Nov 1963" https://victoriancollections.net.au/items/59de9cc421ea6b12dc3f7597Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca railway station, george coop collection, k-158, k-class steam locomotive (vr newport workshops) -
Federation University Historical Collection
Book - ledger, Ballarat School of Mines Reports, 1900-1915, 1900-1915
27 June 1902 - Davey Paxmen Steam Engine 01 September 1905 - James Oddie donation a pair of lanterns and a lantern Microscope 03 August 1906 - Costs of starting an Agricultural High School in the district - Dr Stewart Bequest 29 April 1910- Planning for new Art School Building 28 April 1911 - Ballarat Observatory 26 May 1911 - Ballarat Observatory. Mr Brittain living in the caretaker's cottage, and proposes moving his telescope to the observatory 30 June 1911 - H.H. Smith in conjunction with Mr Clegg asked to prepare sketch plans for a new art school 28 July 1913 - Establishment of the Ballarat Junior Technical School 04 April 1913 - Removal of organ and pipes from the former Wesleyan Church 26 June 1914 - Laying of the Foundation Stone for the Ballarat Technical Art School. A photograph was taken featuring Mr Tate, Mr Carew-Smyth and Col. Watson.Black covered foolscap book with brown leather spine and corners. The handwritten reports were written for the Ballarat School of Mines Councilballarat school of mines, monthly reports, ballarat school of mines principal, ballarat school of mines principal's report, ballarat school of mines battery, ballarat school of mines council, r.t. vale, davey paxmen, andrew anderson, james bickett, james oddie, david kerr, j. baird, learmonth, dr stewart bequest, ballarat technical art school, h.h. smith, w.h. middleton, clegg -
Puffing Billy Railway
Four NSWTD Railway marker Oil lamps
Four NSWTD Railway marker Oil lamps at Nobelius Packing shed Item stamped numbers unknown Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil LampFour NSWTD Railway marker Oil lamps made of metal and glass Railway lamp, paraffin, metal / glass / fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870-1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTDpuffing billy railway , pbr, four nswtd railway marker oil lamps -
City of Ballarat
Public Artwork, Joseph Benedict Chifley (Prime Ministers' Walk) by Ken Palmer, 1946
Joseph Benedict 'Ben' Chifley, Australia’s 16th Prime Minister. A railway engine driver in his home town of Bathurst, New South Wales. The Prime Ministers Avenue is a collection of bronze bust portraits of the Prime Ministers of Australia, located at the Ballarat Botanical Gardens in Ballarat, Victoria. The Prime Ministers' portraits are commissioned after the incumbent term of each Prime Minister by the City of Ballarat. The City of Ballarat has taken responsibility for commissioning the busts after funds set aside by politician Richard Armstrong Crouch were exhausted in 2014. Crouch originally donate money to pay for six busts, the first of which was unveiled in 1940. The collection of prime ministers' busts are unique in Australia, representing the only sculptural portrait collection of all past Australian Prime Ministers. The different styles used reflect the unique artistic practices of the selected artists; textures, sizes and features and proportions are used by the artists to interpret the characteristics of each of the subjects.The artwork is of historic and aesthetic significance to the people of BallaratBronze bust cast on granite plinthJoseph Benedict Chifley Prime Minister 1945-49prime minister, joseph benedict 'ben' chifley, ben' chifley, bathurst -
Melton City Libraries
Photograph, Railway Trucks Derailment, Unknown
Melton and District Historical Society: Railway stations were a hive of activity during the 1900s, transporting produce such as meat, dairy, hay and chafff from the Melton district to Melbourne. Rockbank station served the nearby chaff mill. From Melton Express and Sunbury News, 1910. When Mr Barrie started some 10 years ago with a travelling chaff cutter and a portable engine, and now he has behind him two large sheds, with three chaffcutters, a screw press and a damper and the necessary machinery to work the same, which is proof enough of the energy and zeal he has put forth. Lately he has started another mill a Rockbank with Mr R Barrie in charge and Mr W Barrie in charge at the Melton shed. Much regret is expressed at the departure of Mr Barrie having won the high esteem of his employees and farmers an all who have had any dealings with him. Works undertaken at Rockbank train station, fire brigade members were assisting with the project.emergency services, transport -
Bendigo Military Museum
Photograph - PORTRAIT PHOTOGRAPH, RAN WW1, C. WW2
Item in the collection re William Anthony (Bill) Theodore DSM. The Sailor is Willam Anthony Theodore DSM, enlisted on 2.9.1940 in the RAN No PM2981. He served in the Seige of Tobruk, Greece, Crete, Matapan, Singapore, Pacific Islands, New Guinea to the Phillipine's. The HMAS Vendetta he was sailing on made 39 trips into Tobruk Harbour during the siege. In October 1941 so many bombs were dropped around the Vendetta that her Boilers and Engines shifted on their mountings and was ordered to Singapore for repairs. After Bill served on HMAS Arunta and was awarded the Distinguished Service Medal for "Gallantry, Skill and Devotion to Duty" during the Assault Operations at Lingayen Gulf. Bill was discharged from the RAN on 21.11.1945. From 1956 - 1995 over specific years Bill held the positions of President, Vice President, Treasurer & Welfare Officer of the "Bendigo Rats of Tobruk Association". He was awarded a Life Membership & a Certificate of Appreciation for his services.Photograph, B&W portrait of an RAN Sailor on photographic paper, noted on Sailors Cap "HMAS Cerberus". Frame , metal backing with stand, front shallow convex shape with light brown colour paper mount, heavy plastic cover moulded to shape over photo and mount, owners white adhesive label on the back.Information on label, "THEODORE William Anthony", in black ink print, "Preferred name: Bill/19.03.1917"framed accessories, ran, theodore dsm, photograph, portrait -
Ringwood and District Historical Society
Photograph, Ringwood derailment on 11 Feb 1908 at Wantirna Rd. underpass looking north. Maroondah Highway near trees beyond underpass
Printed directly below photographs, "1. overturned engine and tender at the 'dead end' which was carried away. The X indicates position of fireman McKeone when rescued. 2. View from the road. Railway accident at Ringwood". Typed below photograph, "Ringwood derailment 1902 at Wantirna Rd. underpass looking north. Maroondah Highway near trees beyond underpass". Date incorrect, should be 11 Feb 1908 (as per item 2019) - refer to The Argus article published on Wednesday 12 February 1908, page 7. Thanks to railway enthusiast Neal Glover for pointing out the error. -
Federation University Historical Collection
Magazine, Quadrangle: Magazine of the Junior Technical School Ballarat, 1960, 1960
The 1960 Quadrangle magazine committee were Kelvin Whitford, Bill Heywood, Ken Delayney, Daryl Burt, John Cornish, John McDonald, Ross Gray, and Messrs I. Chisholm and N. Watkins.Salmon coloured soft covered magazine of 46 pages. Contents include: Villiers Internal Combustion Engine, Geelong, School Song, Death of W.J. Paterson, Old Boys Newsletter (Keith Rash), Pine plantation. Robert Champneys, Air Training Corps, Mothers' Club Images include: R. Watson (headmaster), staff, prefects, tennis court, Peter Trezise, Doug Rash, Wong Chik Min, John Gilbert, John McDonald, Ray Bilney, Denis Moy, John Crawley, Roberto Venier, Reijo Karvinen, Cheetham Salt Works; Graeme Cummins, Gerald Kessel, James Colligan, Alan Everett, David Newman, Air Training Corps, Ken Wach, Athletics team, Tunnel Ball Team, Cross Country Team, Basketball Team, Softball Team, Football Team, Swimming team, Cycling Team, Cricket Team, ballarat junior technica school, ballarat school of mines, whitford, watson, paterson, w.j. paterson, george cornell, franklin, tresize, prefects, tennis court, peter trezise, doug rash, wong chik min, john gilbert, john mcdonald, ray bilney, denis moy, john crawley, roberto venier, reijo karvinen, cheetham salt works, graeme cummins, gerald kessel, james colligan, alan everett, david newman, air training corps, ken wach, athletics team, tunnel ball team, cross country team, basketball team, softball team, football team, swimming team, cycling team, cricket team, r. watson, kelvin whitford, bill heywood, ken delayney, daryl burt, john cornish, ross gray, william paterson obituary, ron kirner, keith rash, air training cadets, i. pym, c. antonio, k. woodyatt, b. middleton, a. everett, b. clarke, d. riddiford, i. trembath, j. myers, l. goldsmith, p. chanler, p. edge, s. riddiford, r. cook, j. holt, k. fellows, d. coldicott, douglas rash, g. angow, n. jones, john dellaca, j. angwin, w. scanlon, m. chung, g. holt, r. bilney, w. carey, r. carmichael, b. mckinnon, n. bedggood, r. robinson, c. cunninham, r. grubb, l. skevington, g. cole, w. whiting, ronaldson-tippett, palmer bros, h. dubberley & son, m.b. john and hatersley limited, h.a. davis motor service, alexandria tea rooms -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Newsletter City of Moorabbin Historical Society April 2013 doc, April 2013
The City of Moorabbin Historical Society was formed c 1960 by a group of Moorabbin area residents who were concerned that the history of the area should be preserved. A good response to a call for items related to the historical area of Moorabbin Shire brought donations of a wide variety of artefacts that are now preserved by the current members of CMHS at Box Cottage Museum. Helen Stanley, Secretary of CMHS, began producing a Newsletter for members in April 2007 to provide current information and well researched items of historical interest Helen retired in 2012 and Dr Bill Richardson, Secretary CMHS produced this NewsletterDr Bill Richardson, Secretary, has taken on the role of producing the bimonthly Newsletter for CMHS following the resignation of Helen Stanley. The Victorian Government Legislation has a new set of Model Rules that we have been invited to adopt and modify if we feel necessary. Our conclusion is that the new Model Rules are generally comprehensive and adequate, and are simple to understand. We recommend that the new model rules be adopted with some possible additions.A4 paper x 2 pages printed on one side. This is the first of the bi-monthly, City of Moorabbin Historical Society Newsletter produced by Society member and Secretary, Dr. Bill Richardson in April 2013. YouTube video of the Cottage is up and running. Type Box Cottage in search engine. City of Glen Eira properties staff inspected Cottage, found all ok and organised some photographs for the Glen Eira residents’ handbook. Dennis has installed the new display cabinets that he built for the barn for the tools that were displayed in the dairy. This was funded by CGE Community Grant . We will need to decide on the Model Rules and our purposes as required by the new Victorian Government legislation. The next general meeting is on 28th April at 1:00pm .Membership fees for 2013 are due and payable. Volunteers will be needed on Friday 26th April City of Moorabbin Historical Society Inc. / Reg. No. A0020547E / Box Cottage Museum/ Joyce Park, Jasper Road, Ormond / Secretary: Dr Bill Richardson / Secretary's News / April 2013victorian government, incorporated associations, dale james, stanley helen, maynard dennis, richardson bill, newsletters, moorabin, bentleigh, ormond, cheltenham -
Bendigo Historical Society Inc.
Book - RAILWAYS COLLECTION: AUSTRALIAN RAILWAYS HISTORICAL SOCIETY 100 YEARS TO BENDIGO
Railways Collection-Stapled A4 paper Booklet (Commemorating the Centenary of the opening of the railway from Melbourne to Bendigo , 20.10.1962 ) - Australian Railways Historical Society ''100 Years to Bendigo''. The front page has a sketch by Ted Healey of two old trains pulling passenger carriages.There are some black and white photos. The inside cover shows steam Loco with a caption - Down Great Northern Limited express in 1938 Double headed by A2 .972 and A2.883 passing Footscray. (photo : J.L. Buckland ) Page 2 has a photo of a Postcard - 450 Tons of Gold - Pages 10-12 provide information on the Locomotives and carriages that were used. Page 23 has a photo of G Class Light Lines 4-4-0 and V Class Compound 2-8-0 Locos at Bendigo Engine shed in the early 1900's.railways, bendigo to melbourne, 450 tons of gold - -
Bendigo Historical Society Inc.
Document - NORTH DEBORAH GOLD MINING CO N. L. - BASIC WAGE INCREASE OF 4/- WEEK NOV 1952
Handwritten page of wages per week and wages per shift of the different mine workers, they were: Miner Learner, Miner, Miner Rise & Winze, Miner Dry Shaft, Miner Wet Shaft, Miner Leader Wet Shaft, Shift Boss, Shovellers Below, Shovellers Wet Shaft, Plat & Brace, Plat Wet, Winch Driver, Timberman, Timberman Shaft, Timberman Wet Shaft. For Surface workers: Shoveller, Blacksmith, Tool Sharpener, Engine Driver (Winding), Fireman 1 Boiler, Fireman 2 Boilers. Battery Workers: Batteryman, Batteryman Special, Battery Feeder, Cracker Attendant, Battery Driver, Battery Driver In Charge of Dynamo and Plant and Battery Driver in Charge of Dynamo. Basic Wage 11 pound 5 shillings Per Week. Wages for North Deborah No 1 Shaft November 1952.document, gold, north deborah gold mining co n. l., north deborah gold mining co n. l., basic wage increase of 4/- week nov 1952, north deborah no 1 shaft, basic wage -
Bendigo Historical Society Inc.
Document - ALBERT RICHARDSON COLLECTION: HERCULES MINE REPORT 1936
a. four page handwritten report on the Hercules Mine, half yearly reports 1936. Extract: Reef worked below the 1620 feet level has been opened up at 1,840 feet. Profit has been earned but values are now unprofitable. At the Stanfield shaft, erection of plan was completed and shaft sunk to 344 feet. X cuts put out at 230 and 310 feet. Angus Mackay Chairman. b. Summary of sale of mine from Bendigo Advertiser 19.6.1950, handwritten by Albert Richardson, re the sale of the mining equipment at the Hercules Mine. ' Winding engines sold for £200 Compressor £425 and the oregon poppet legs for £41. The three main buildings went for £435 , the office and store room for £80, and die room for £12 Most spirited bidding was for 5 tons of firewood which finally went for £12Albert Richardsonbendigo, mining, hercules mine -
Bendigo Historical Society Inc.
Document - LITTLE 180 BATTERY - EXTRACT FROM BENDIGO ADVERTISER ON LITTLE 180 BATTERY
Handwritten extracts from the Bendigo Advertiser Monday July 24th 1933. First erected for 20 years. Mr Cook performs Opening. Approx. 400 people attended the opening on Sat 22nd. Expected that when run in, the ore will be crushed for 2/6 per ton. Consists of 10 heads, 1000 lbs each. Boxes are of Homestake pattern with wooden horses of special timber and iron guides. Copper plate tables of ample area provided. Floors are of concrete and so graded that all washings - -. Expected later to expand to 30 head. A 114 H P Ruston-Hornsby crude oil engine is provided with a friction clutch to facilitate easy starting, and will be capable of driving the battery when it is extended. Those who attended the opening were subsequently the guests of the Company at light refreshments. Copied 1/7/1970.gold mining, miners' safety cage, little 180 battery, mr cook, bendigo advertiser, 114 h p ruston-hornsby crude oil engine -
Bendigo Historical Society Inc.
Document - GARDEN GULLY UNITED MINE - GARDEN GULLY UNITED FIRE
Hand written notes on the fire at the Garden Gully United Mine 29/3/1911. Two reports from the Bendigo Advertiser 29 and 30 March 1911. First report battery watchman John Davey saw nothing unusual, then later saw the reflection of fire in the engine house. Second report mentions hose stretched over Mt Korong Rd being run over by Chinese market gardeners and others making the leaky hose leak all the more. Cages only travelled a short distance after the ropes broke. Unemployment after air compressors ruined by the fire. Written on the back: Some Facts and Figures - The Bendigo Goldfield has had its good and bad years. Yields ranged from 475, 857 ozs in 1852 and 451,588 ozs in 1856 to 168,990 ozs in 1878 and 148,700 -mine, gold, garden gully united mine, garden gully united mine, garden gully united fire, bendigo advertiser 29-30/3/1911, john davey -
Bendigo Historical Society Inc.
Postcard - BASIL WATSON COLLECTION: AVRO PLANE
Postcard: black and white card - two sections. On top aeroplane, 'Patented 1906, the first free aeroplane to leave the ground in Britain' On bottom of card, photo of three tiered wing aeroplane. Written on bottom' Avro' plane flying with only 14 h.p. On back of card: The 'Avro'plane. The first aeroplane illustrated was the first free heavier-than-air machine to leave the the ground. Before this however, very interesting flights were made when towed by a motor car at Brooklands Track. The other photo shows a flight with 14 horse power, but previous to this some hundreds of flights were made with only a nine horse power engine. A record which has not yet been beaten or equalled. Mr. A.V. Roe is now making monoplanes, biplanes and triplanes &c. For full particulars please write to A.V. Roe & Co., Brownsfield Mills, Manchester.aviation, civilian, avro biplane, basil watson, biplane, aeroplane -
Bendigo Historical Society Inc.
Document - MCCOLL, RANKIN AND STANISTREET COLLECTION: NOTES RE GOVERNMENT GAZETTES AND LIST OF PLANT
Two page, handwritten document on lined paper - front page reference to Victorian Government Gazettes and Chinese regulations, where listed in the gazettes and dates. Includes Chinese regulations for management of Chinese on Gold fields (1856) , Chinamans Flat Steam Engine company (1857), two Chinese murdered at Clinkers Hill, Castlemaine (1862) Charles Chromley Dowling appointed Chinese Protector (1857), John Chatfield Tyler Immigration agent, to carry out the Chinese Emigrations Act (1861) Back page dated 1947 lists "stocktake list of plant" On list - Deborah United 1946; North Hustlers; New Monument GMC, North Virginia, South Wattle Gully, Central Napoleon, Red, White and Blue Extended, Deborah Extended, New Don, East Clarence, Napoleon Reef, New Monument Battery, Deborah Extended. Possibly written by Albert Richardson.bendigo, mining, mccoll rankin & stanistreet -
Bendigo Historical Society Inc.
Photograph - CARWARDINE COLLECTION: STREETVIEW CHARING CROSS AND VIEW POINT, BENDIGO
Black and white photo. Image shows Charing Cross and View Point, looking northwards up Pall Mall (taken from City Family Hotel?) View Point businesses evident are : National and Mutual Life; A.M. Armstrong newsagents with 'The Argus popular daily ' on front; Moran and Cato, Warren's View Point Hotel, with two storey veranda ( on side: Cameo Cigarettes). Tram in foreground in View Street approaching fountain. Hustler's Royal Reserve poppet head and chimney on western side of Pall Mall, smoke rising from engine house? Post Office building with clock tower in distance. On RH side of image: written on verandah, Woodrow's Southern Cross Hotel; E.L. Holdsworth Chemist and Shamrock Hotel in distance. Four horse drawn taxis in centre of Charing Cross roadway, near fountain. Receipt number 355/16bendigo, business, carwardine soap and candle -
Wodonga & District Historical Society Inc
Photograph - Fred Rochow Railways Collection - Engine Instructor Jack Brown and Driver Fred Rochow, 1988
The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Engine Instructor Jack Brown and Driver Fred Rochow standing in front of The Flying Scotsman in Albury on 25 October1988. The Flying Scotsman Pacific 4-6-2, perhaps one of the most iconic steam locomotives in the world, visited Australia in 1988-89 for a series of events associated with the country’s bicentennial celebrations. As part of the Bicentennial celebrations locomotives began to arrive in Melbourne for the AusSteam 88 exhibition from 14 October. A planned parallel run south of Seymour with NSW locomotives 3112 and 1210 and Victorian Railways J515 had to be abandoned due to late running by the NSW locomotives. A parallel run did take place on Sunday 16 October when VR R761 and NSW 3801 ran from Wodonga to Melbourne. On 25 October 1988, the Flying Scotsman worked its first passenger trip in Australia when it took a return Melbourne to Albury journey. On insignia on the side of locomotive "FLYING SCOTSMAN"railways wodonga, fred rochow, flying scotsman, railways albury, australia bicentennial -
Bendigo Military Museum
Photograph - Christmas Children’s Party - Army Survey Regiment, Fortuna, Bendigo, 1992
This set of 16 photos of the Christmas Children’s Party were taken in the and the grounds of Fortuna, Army Survey Regiment in 1992. The Christmas party was an annual event enjoyed by the soldiers’ families, featuring amusements such as the ‘pig train’ and pony rides, a historic fire engine provided by the Golden Square Fire Brigade with Santa on board and refreshments such as cordial, lollies, ice creams and fairy floss. Single members readily volunteered to assist in the running of the party. An occasional highlight was displays of military hardware such as tanks and APC from the Puckapunyal’s Armoured Centre. Catering staff/contractors taking a break outside the kitchen are also featured in this collection. The Army Survey Regiment Wives Club was instrumental in establishing the Tennis Hut, featuring in photos .1P to .5P. The Wives Club initiated many social events. Examples of activities initiated by the club and their importance to the social fabric of the unit are described in more detail on page 151 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4.This set of 16 photos were taken in the grounds and kitchen area of Fortuna, Army Survey Regiment, Bendigo, at Christmas time in 1992. The photographs are on 35mm negative film and were scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, black & white, 1992, unidentified civilians and person. .2) - Photo, black & white, 1992, SGT Brian Fauth, SPR Carmel (Butler) Fauth and their child. .3) - Photo, black & white, 1992, L to R: SPR Joyce Gray, unidentified, SPR Andrew Arman. .4) to .5) - Photo, black & white, 1992, unidentified. .6) - Photo, black & white, 1992, Craig Kellett. .7) - Photo, black & white, 1992, L to R: Cam Bramich, unidentified (x2). .8) to.10) - Photo, black & white, 1992, unidentified. .11) to .15) - Photo, black & white, 1992, unidentified catering staff and contractors. .16) - Photo, black & white, 1992, Children’s rides on parade ground.No personnel are identified.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr -
Flagstaff Hill Maritime Museum and Village
Book - Reference, Steam Turbines, 1922
This textbook was written for engineering students by Scottish Professor, William J Goudie, D. Sc., (1868-1945). He was a member of the Institution of Mechanical Engineers, a member of the Institution of Engineers and Shipbuilders in Scotland, an Associate Member of the Institution of Civil Engineers, James Watt Chair of Mechanical Engineering, University of Glasgow, and Professor of "The Theory and practice of Heat Engines" in the University of Glasgow. He wrote several papers and books on the topics of mechanical speed and power. The publisher firm, Longmans, Green & Co., was originally founded in 1724 in London by Thomas Longman under the name Longman. In August of that year, he bought the two shops and goods of William Taylor and set up his publishing house there at 39 Paternoster Row. The shops were called Black Swan and Ship, and it is said that the 'ship' sign was the inspiration for Longman's Logo. After many changes of name and management, the firm was incorporated in 1926 as Longmans, Green & Co. Pty Ltd. The firm was acquired by Pearson in 1968 and was known as Pearson Longman or Pearson PLC. The first practical steam turbine was built in 1884 by Charles Parsons and this became the beginning of generating electricity and powering large ships. The author of Steam Turbines, Professor William John Couldie D. Sc, was a mechanical engineer who had practical experience in a marine consulting engineering service and lectured in the theory and practice of mechanical engineering.This book is an example of the development of technology that contributed to the evolution of steam turbines. The book is also significant for its connection to the publisher Longmans, Green and Co., of London, a firm that has been established for over two centuries, renowned for publishing encyclopedias, dictionaries, books on English grammar, textbooks, poetry, reference books, novels, magazines and more.Steam Turbines, by William J. Goudie, D. Sc., Second edition, rewritten and enlarged. Published by Longmans, Green & Co. in 1922. The book has a textured green hardcover with a printed black title on the front cover and a gold embossed title on the spine. The fly page describes the contents. It states the author's credentials and the book's features - 329 illustrations and numerous examples.. The logo of Longmans, Green & Co. is on the fly page. It is a line drawing of a shield above a leafy wreath border surrounding a sailing ship at sea with a plaque below. Inscriptions are on the shield and plaque.On the shield: "L & Co" [Longman Green & Co.] On the plaque: "1724" [date business was established]flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, steam turbines, longmans green and co, paternoster row london, ship logo, engineering studies, textbook, 1922, longmans green and co., l & co., 1724, institution of mechanical engineers, institution of engineers and shipbuilders scotland, institution of civil engineers, james watt professor of "the theory and practice of heat engines", thomas longman, paternoster row, william goudie, william j goudie, professor william j goudie d. sc., james watt chair of mechanical engineering, steam turbine, marine turbines, steam power -
Seaworks Maritime Museum
Inclinometer, From MV Sydney Trader - in brass
1998 -01/10: chartered to the UK "Maritime & Coastguard Agency" as 'Emergency Towing Vessel' (EVT), based at Stornoway Inclinometer from the ship The Brisbane Trader, the sister ship to the Sydney Trader. Called a "roll on- roll off" vessel, the radical design for the time carried vehicles and containers on deck. The shallow draught allowed the ship access to smaller Australian coastal ports. The officers and crew enjoyed improved accommodation. Built and completed December 1969 by Evans Deakin and co. pty ltd. of Brisbane, they were also the owner. Twin Screw. Diesel Engine. Speed 17.5 knots. 6,236 gross tons, 2,961 net. 4,422 dwt. lbd: 448'5"x70'"7x2-'"3 Broken up at Kaohsiung November 1984. The Engineering business of Evans Deakin and Co. was established in 1910 by Daniel Evans and Arthur Deakin. A shipyard was built at Kangaroo Point where 81 ships were constructed between 1940 and 1971. THe Business was taken over by Downer Holdings Pty Ltd in 2001. From the MV Sydney TraderA period brass inclinometer From the M V Sydney Trader, "MV SYDNEY TRADER 1969 ANL/ 25 20 15 10 5 0 5 10 15 20 25" -
Warrnambool and District Historical Society Inc.
Document, Ist Airmail letter 1917, 1917
This letter, the first air mail letter sent to Warrnambool, was written by the Lord Mayor of Melbourne, Sir David Valentine Hennessy and carried by the aviator, Basil Watson on the first flight to Warrnambool January 24th 1917. The letter was delivered to the Mayor of Warrnambool, Cr Webb.There were several other letters delivered at the same time but this is the important official one. Basil Watson was a pioneer aviator who built his own aeroplane which was 18 feet long with a wing span of 26 feet and it had a 7 cylinder 50 H.P. Rotary Gnome engine. Watson flew from Point Cook to Warrnambool in one hour 55 minutes, an Australian cross-country flying record at the time. In Warrnambool Watson amazed the crowd with his dare-devil aerial acrobatics, looping the loop 14 times over the Warrnambool Racecourse. Basil Watson died when he crashed his plane into the sea near Point Cook, just two months after he landed in Warrnambool. This letter is of the utmost significance being the first air mail letter delivered to Warrnambool. It is an important memento of the first aeroplane flight into Warrnambool by the pioneer aviator Basil Watson. This is a cream-coloured sheet of paper folded in two to make four pages. It has handwriting in black ink on two pages. The writing is a little faded. The first page has the logo of the Melbourne Town Hall. The pages are partly torn at the folds. ‘Town Hall, Melbourne, 21/1/17. Lord Mayor’s Room, Dear Mr Mayor, I have much pleasure in sending you greetings by aeroplane piloted by my friend’s son, Mr Basil Watson. I hope when the cruel war is over and victory crowns our efforts, we all in the C’wealth will be able to fly from one state to the other. With best wishes for the New Year, …….. (signature indecipherable), D.V. Hennessy. His Worship the Mayor of Warrnambool.’pioneer aviation in the western district, basil watson, history of warrnambool -
Glen Eira Historical Society
Article - CAULFIELD RAILWAY STATION
This file contains four items: 1/Press cutting from Caulfield Contact, November 1991 (brief report, with photograph of Caulfield Station passengers boarding the steam engine K163 bound for Frankston on Public Transport Open Day). 2/Five pages (stapled together) of photo copied recommendations and assessment by Andrew Ward, March 1995, relating to the history, condition and conservation of the Caulfield Railway Station complex (includes four photocopied photographs). 3/Six pages (stapled together) of material from Heritage Victoria, to B. Evans, Environment Offices, Bayside Trains, 05/03/1999 (two sheets), with enclosure (4 sheets) relating to the cultural heritage significance of the Caulfield Railway Station complex (includes one photocopied photograph). 4/Photocopy of postcard (gelatin silver photograph) of ‘Three new railway lines, train going to Oakleigh [at Caulfield Railway Station]’ c1915, from State Library of Victoria (print dated 12/06/2013).caulfield railway station, b. evans, steam engines, railway stations, railway buildings, ray tonkin, heritage victoria, andrew ward -
Otway Districts Historical Society
Photograph, Between Devitt Bros. Siding & Ditchley, 1901, 1901
Construction of the Colac-Beech Forest railway line began in 1900 with about 100 men engaged in laying and ballasting the track, as well as others forming the earthworks and building culverts and bridges. The result of this labour saw the railway advance from Colac until it climbed a spur hugging the side of a forty degree slope emerging on top of the ridge at Beech Forest. This photograph was taken 28 miles (45 kilometres) from Colac between Devitt Bros. Siding and Ditchley, just out of Beech Forest. Two 2-6-2 Tank engines of the narrow-gauge A class built by Victorian Railway's Newport workshop, were commonly dubbed 'Coffee Pots'. As well as pulling a load of NQR wagons a NBB saloon car ended the train. The devastation to the standing timber was deliberate: the Engineer-in-Chief of VR ruled that all trees within a certain distance of the railway line were to be cut down. This certainly saved the line from destruction several times in the future.B/W. An NA class locomotive, NQR wagons and an NBB saloon car, all with workmen, going around a bend between Devitt Brother's Siding and Ditchley on the Beech Forest line in 1901.beech forest; ditchley; devitt bros siding, railways;