Has a strong association with the work of the Royal South Street Society, who published a handbook or manual for their competitions. Used a photograph published at about the same time.Printed sepia coloured photograph of Sturt St. in the mid 1940's looking from the top of a building in Grenville St. towards the West. Has a number of parked vehicles in kerbs, two people riding horses, a Vacuum Oil Co. truck in the bottom right hand corner and an SEC tram travelling west, just past the City Loop points. Colour postcard of same photograph see Reg Item 2981 and another print see Reg Item 675 Appeared in the 1939 Royal South St Society competition Manual. Appears to have been used as a piece of note paper. See also Reg item 675 for alternative source details.Handwritten note in very faint pencil on rear.trams, tramways, ballarat, sturt st., royal south street society

Black and white postcard of Charing Cross Bendigo, early 1950's or late 1940's. Rose Series postcard P13585, of a bogie tram heading to Eaglehawk behind the fountain and a single trucker heading for Golden Square hidden behind a pole. A number of motor cars in the scene along with people in summer clothing. In the background is the Beehive building, Mobilgas advertisement on top of the Beehive building and "Melba Frocks" shop on the corner, later Ezywalkin shoes. The postcard has the title underneath of "Looking north from Charing Cross Bendigo Vic". Divided back type with Rose Postcard Rose logo and that it was published by the Rose Stereograph Co. Armadale Victoria. Has not been used.trams, tramways, bendigo, charing cross, rose postcards

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Small Wheel Lorry replicates the vehicle that enjoyed respect from the public during the 1880's and early 1900's. A model of a Small Wheel Lorry with a long four spoked wheeled wooden flay tray drawn by a brown horse. The wooden shafts are to control the horse whilst working. It has a grey wooden ice box with a metal lid with ICE painted in black letters inside a black lined outline on the side. On the side of they lorry or dray is painted WOOD - COAL - COKE - C. MEE LA1271 in black paint. These are long strong carts or drays without fixed sides for carrying heavy loads. They were the truck of the horse drawn era, from the large wool bale lorry to the suburban ice and wood lorry. It has been said they had their origins in the German farm wagon.ICE is painted in black capital letters on the side of the ice box. On the side of the lorry is painted - WOOD - COAL - COKE - C. MEE LA1271replicas, models, scale models, vehicles, horse drawn vehicles, toy horses, drays, carts

Black and white photograph of 2 trams at Preston Workshops c1948 First tram 500 is a W2 class tram built by MMTB at Preston Workshops in 1928. It entered service 27/4/1928 and was withdrawn from service and sold in 1981. The tram's destination is shown as "Special". The tram has been fitted "T" lettered taillights. The second tram, 198, is a Q1 class single truck straight-sill combination tram built by the MMTB at Holden St Workshops. It entered service in 1923 and was reclassified as a Q class tram. It was converted to all night service in 1937 and operated until 1957. It was reclassified as a freight car and renumbered as W15 in 1958, before it was withdrawn from service in 1986.trams, tramways, w2 class, q class, preston workshops, lights, tram 500, tram 198

Series of 8 black and white photographs of the trackwork equipment and tools on the MMTB system. .1 - Hydraulic drain cover lifting device. .2 - rack of jack hammers being lifted - St Kilda Road? .3 - length of rail being lifted by 12 men with MMTB equipment in the background. .4 - Pack of sleepers being lifted with many wood blocks in the background. .5 - pack of 12 jack hammers in their lifting rack. .6 - light weight tool being used to lift a track pit cover by two men. .7 - One man demonstrating the lifting of a 44 gallon drum. .8 - two men rolling a 44 gallon drum off a truck.trams, tramways, trackwork, rails, track materials, track repairs, sleepers, equipment

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Collins Australian Diary, 1962, No. 324 printed by Collins Bros, pattered dark red cover with green cloth binding on cover, card covers, sewn sections with ruled sheets providing a diary for 1962, one week per double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc In the Memoranda section (last two pages), list of names and addresses of track gang and notes on materials used, costs, scrubber use and hours, and length of track. Has notes when some finished on the track gang - elsewhere within the SEC? Grove Platt Lancaster Wiseman Lakey Edwards Dowie Marks Fish Eames Smith Loose contents 1. - Inside front cover - 12 green and pink "Workshop Requisition" requesting work by the track gang outside the direct tramway area, eg Ballarat B station and one handwritten note. 2.- Telephone numbers - a receipt made out to E. Fish for jury duties fees. 3 - 19/3/1962 - printed card from the Municipal Officers Assoc (SECOA) for a general meeting at Electra Hall on 7/12. 4 - April Cash account - note re requirement for tip truck to pick up materials. 5 - Inside last sheets - medical certificate for H. Dowie, dated 10/7/1962. tram, trams, sec, ballarat, depot, trackwork, rails, scrubber tram

Yields information about the appearance of Geelong's trams in particular ex Melbourne J class trams after receipt in Geelong. This tram later became Ballarat No. 11.Black and white print from a Geoff Grant negative of a Geelong bogie tram entering Corio Terrace from the Geelong depot on 8/1/1956, while Pengelley 19 waits in the siding. The bogie tram (37) has destination of "Special", 19 - "Chilwell". Has the Geelong SEC depot/powerhouse building in the background with part of the Blakistons' sign visible. Photo used in Trolley Wire, Feb. 1999, page 11, article on Geelong tramways. Pencil marks on the rear of the photo indicate proposed used of the photo in the article. 2472.2 - As above but with the rear of the motor vehicle edited from the photograph. Produced by William Scott for his book, 2008. Two copies. Added 21/7/2009. 2472.3 - large format print from Lloyd Rogers collection via Robert Green 2/2014. Added 4-4-20192472 - On rear in red ink "Geelong Depot 8-1-56" in top left hand corner and in bottom left hand corner "G.A. Grant" 2472.1 - on rear of copy 1 in ink in top left hand corner "40) Geelong 8.1.1956 / G. Grant pic / modified image (background only). Last day of Chilwell Route in 1st closures. Single truck car being changed over about mid afternoon for a bogie car to cater for increased traffic / Cars 19 and 37." copy 2 - "Geelong 8.1.1956 / G. Grant pic / cars 19 & 37." copy 3 - "Geelong tram depot / 8th Jan 1956"trams, tramways, geelong, geelong depot, corio terrace, chilwell, tram 19, tram 37

TACL-Tractor Appliance Company Limited TACL rail tractors manufactured by Malcolm Moore of Port Melbourne Located in the Parishes of Moondarra and Telbit, Gippsland, the tramway terminated at Collins Siding on the Moe Walhalla 2'6"gauge branch of the Victorian Railways. Its construction by the Forests Commission of Victoria was to facilitate the extraction of timber from the Southern and Western slopes of Mount Erica and to replace the outlet tramways destroyed during the disastrous forest fires of February 1926. Tyers Valley Tramway The line, following the Eastern arm of the river, passed Ingrams Siding (7m.) to terminate at a forest area, known as "Ten Acre Block", 8m. 60c. from Collins Siding. The western branch of the line followed the Western Tyers Valley to Growlers Creek, 13m. 40c. from Collins Siding. THE T.A.C.L. TRACTORS at Tyers Valley tramway. On the 19th January 1928, T.A.C.L. locomotive, purchased from Tractor Appliance Co. Ltd. (Malcolm Moore), was delivered. This unit had a 20 h.p. Fordson engine coupled by a chain drive to the two axles, providing a tractive effort of approx. 2000lbs. Wheelbase was 5’ and weight was four tons. It was intended that the two tractor locomotives, working with the grade, would deliver timber from the branch lines to Tyers Junction, from which place it would be steam hauled out to the Collins Siding transfer point. Following a breakdown of the steam locomotive, haulage during the early months of 1928 was carried out by the T.A.C.L. unit, supplemented by the Nattrass, which was, by this time, becoming unreliable. During April 1928, after ensuring that no suitable locomotive was available in Australia, an order was placed with the Climax Manufacturing Co., U.S.A. for the supply of a geared locomotive. A second T.A.C.L. engine was purchased during May and, on the 27th, the local mill owners, having obtained running rights on the tramway, commenced haulage with the Harman. The three tractor units worked the branch lines and transported ballast, whilst the Harman hauled the timber to Collins Siding in rakes of eight trucks (56 tons). The weekly loading of the line for the first, second and third weeks were 54, 62 and 71 trucks respectively. info from : http://www.nmra.org.au/tyersvalley/Tyers-Tram.html Historic - Industrial Narrow gauge Railway - Timber working - Rail Tractor used by the the Forests Commission of Victoria on the Tyers Valley TramwayRail Tractor with Fordson engine coupled by a chain drive to the two axles - made of steel and wrought ironerica sawmill, puffing billy, tacl, rail tractor, tractor appliance co. ltd. (malcolm moore), industrial narrow gauge railway, tyers valley tramway, forests commission of victoria

This glass milk bottle was manufactured and used mid 1800's (1834 Victorian dairy industry was founded) to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the large volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36"This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against sunlight penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it 6/33 and next to this "ONE PINT" and under this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head was manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle which contained milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "3"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/36" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "15" glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a half pint capacity and is made from "clear" glass. There are other milk bottles that have a "green" tint in them and this tint was to protect the contents from sun damage. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the top half of this bottle is "MILK" and opposite "HALF PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base is "2 M" underneath this "8/11" and underneath is "ISM -169"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

Manual - 176 quarto pages + light grey covers Electrical" on a cover pages. with a red comb binding. Prepared by Donald G Curry of the Seashore Electric Railway, 17/6/1962. Document has table of contents: Covers Painting, Roof repairs, body repairs, inspections, Lubrication, Traction Motor Maintenance, controllers, hand operated circuit breaks, car resistors, traction braking equipment, trucks and rigging. Has an appendix and index. Document has been scanned. Part 1 - cover to page 17 2 - pages 18 to 40 3 - pages 41 to 66 4 - pages 67 to 100 5 - pages 101 to 132 6 - pages 132 to 159 7 - pages 160 to rear cover trams, tramways, manual, tramcar equipment, maintenance, motors, controllers, tramcars, tram bodies

Yields information about the seemingly frequent derailment of bogie trams at this intersection and the people who travelled on the tram and alternative means of transport - walking. Also details information about the streetscape, clothing, and buildings.Black and White copy photograph of a newspaper photograph taken by The Courier - No. 40 derailed, Bridge & Main Sts corner, 1964. Photo taken 1/07/1964, published 2/07/1964 No. 40 bound for Mt Pleasant. Location Stones Corner. Has buildings in Bridge St in the background and part of Stones sign. Photo shows many people, passengers, from the single truck tram behind No. 40, walking up Bakery Hill towards Victoria St West. Ladies, Gents, shoppers, passengers, school children etc. Collected by Alan Bradley from the Ballarat Courier early 1980's. See Excel file "Record of Ballarat Courier Photos SEC era" (Archive Documents) for source of details.On rear stamped "Copyright, The Ballarat Courier Proprietary Limited."tramways, trams, stones corner, bridge st, derailments, accidents, passengers, tram 40

Newspaper clipping from The Courier, 20/3/1963, titled "Bluebirds cause keen excitement in the city", recording the passing of the convoy of Donald Campbell's Bluebird car and speedboat through Ballarat and stopping outside the Town Hall. Photo has tramcar 14 and a bogie tram in the background. Donald Campbell himself was unable to attend. Bluebird was one the motor vehicle used in the land world speed record attempts of the era. Show many people milling around the truck carrying the trailer, barricades. People had blocked Sturt St at this point. See Reg Item 3734 for a print of the photograph. Contained originally within Reg Item 5507 at the back of the binder. For items see btm5507 loose items list.pdf bluebird, sturt st

Yields information about Ballarat No. 25 leaving the depot for Bendigo Oct. 1960.Negative and Digital images of the Wal Jack Ballarat Negative file of trams 25 leaving for Bendigo. Shows Yellow Express Mack prime mover GPU 328 with Ballarat Tram No. 25 loaded and leaving the depot. Tram has destination box removed. Also the process of fitting the dash canopy lighting had commenced, with the small white stripe painted under the windows. Also would appear trolley pole base has been removed. Taken 6/10/1960. See also Reg Item 1478 - this is a different image and 7763i for Bendigo 1 in the depot and 7766 for the truck leaving. See Reg Items 1478, 5241, 5242, 7759 and 7766 for a series of 5 photos of this event.trams, tramways, yellow express, transporting trams, moving trams, bendigo, tram 25

Set of four Black and White photograph of recovery equipment for tramcars. Two prints of each except - .4 .1 - steel beam shown in position in the saloon portion of a tram used to secure a bogie to the body of tram with steel section over transom and showing lifting hooks and securing or lifting bolts. Shown in position where the tramcar body floor was above that of the tramcar transom. .2 - ditto, but on an angle in a wide body tram where the top of the transom matched the top of the floor. The bogies are on an angle. .3 - brackets in position for securing the body spring on the truck fitted to tram 980 to the body of the tram. .4 - brackets shown stored inside the cabin of the tram. Mid 1970's? Photographer likely MMTBtrams, tramways, recovery, accidents, tramcars, sw6 class, pcc class, w2 class, tram 980, st. louis b3

243.1 - Compact Diskette - CD - plastic contained within a light card cover, titled "Driving with trams and buses" produced by VicRoads to give information to motor car and truck drivers about driving with trams and buses. Produced in association with Yarra Trams, c2011. Has on the rear contract details. Part of the think tram project. 2nd copy added 3/8/2013 along with 243.2 243.2 - Mini CD/DVD (80mm diameter) in a cardboard folder, titled "Driving with Trams" - two copies held. 3rd copy added 11/6/2022 from an unknown source. See Reg Item 2416 for a pamphlet with similar materials. Mini CD/DVD copied onto the AV file database.trams, tramways, vicroads, yarra trams, compact disc cd, motor vehicles, motor buses

One of three photos. Group of people including children associated with the Australian Natives Association at an outing at Eltham. A truck displays a flag "Join the Natives". The first image was reproduced in EDHS Newsletter No. 163 July 2005 following a query from Nillumbik Historical society (Gwen Myers) seeking information about the location of the photo. It was suggested that it may be Eltham Lower Park, however the house in the background did not appear correct. There were simliar but mirror imaged. A more recent review of these photographs (2023) suggests that the photos were actually taken in Bremners flats (present-day Wingrove Park) looking towards the house near the intersection of Main and Mount Pleasant roads - Mrs Bremner's house. The topograpghy is also more in fitting with this location than that of Eltham Lower Park. A review of a 1945 aerial photo shows only one house of similar style present in this location. Further reviews of photos taken in the 1950s ny Grace Mitchell looking back towards Bremner Flats shows two trees close by on a lean similar to that in the photos. Inkjet-printed copy of sepia photographaustralian natives association, recruitment, bremners flats, wingrove park

Annual report of the Braille & Talking Book Library including Minutes of the AGM, Board of Director's Report, President's report and financial statements. Items also included are: embedding the new philosophy 'that all may read', VIP Tours began with tour of library and lunch at 'Onions' restaurant afterwards, increased loans but also a 5 month waiting list for new borrowers, Children's Christmas Party conducted, Barrett Reid, Joyce Nicholson and Dr Stephen Murray-Smith continue to be the literary panel for Braille Book of the Year, Annual Garden Party at Benalla, 63rd work anniversary of Alice McClelland, computerisation of card catalogue has received funds and should be completed by early 1986, and have the added benefit of eliminating wait times for new borrowers, resignation of Clare Lovegrove and Beverley Johnson and appointment of Seija Makinen and Alana McCann, first joint commission of braille books from RIDBC by Library and 8 state organisations, and purchase of an electric conveyor belt to help load the Australia Post truck with the daily 30 bags of mail received and the same outgoing.1 volume of text and illustrationsbraille and talking book library, annual report

This article acknowledged the naming of Ory's Trail at Falls Creek in 1986. Orest “Ory” Frueauf was born in Kharkov, Russia in 1925 and moved to Germany with his family to escape persecution. He was conscripted to the German Army during the Second World War. He was a POW until 1948. He was recruited by a French construction company to work as and interpreter on a hydroelectricity project in Tasmania. Ory then moved to work on the Snowy Mountain Scheme including driving a truck to fill the wall of the Rocky Valley dam. In 1952 Ory was recruited by the Albury Ski Club as its lodge supervisor. That year he also entered into a business partnership with Cecil Dobson, running the general store “Whitehaven” and Post Office at Falls Creek. They extended their business by adding accommodation turning Whitehaven into one of the best commercial lodges at Falls Creek. Ory and Cecil dissolved their business partnership in 1963 and Ory went on to build a new lodge called “Snowhaven” at the site of the present day Frueauf Village, Falls Creek. Ory retired to Tawonga, Victoria in 1992 and passed away in 1999.This article is significant because it documents the naming of Ory's Trail to recognise a pioneer of Falls Creek.A newspaper item about Ory Freauf on the occasion of the naming of Ory's Trail at Falls Creek.falls creek pioneers, frueauf, ory frueauf

Cudgewa Line -The Cudgewa railway line opened in stages between 1889 and 1921. The first section from Wodonga to Huon opened on 10 September 1889. It was extended to Bolga on 18 July 1890, Tallangatta on 24 July 1891, Shelley on 13 June 1916 (the highest station in Victoria), Beetomba on 10 April 1919 and Cudgewa on 5 May 1921. The line had 1 in 30 grades and trestle bridges that have been heritage listed. In 1919, the line was used to carry materials for the construction of Hume Weir, and three years later a spur line connecting Ebden to the weir was opened. In the 1960s, Cudgewa became the railhead of materials for the Snowy Mountains Scheme. The last passenger service from Wodonga to Tallangatta ran on 30 September 1961. The turntable and passenger platform at Cudgewa were abolished in 1976. This fish plate came from the rails of the Cudgewa Line at Gordon Roy's hut which was situated behind Perry's Stump Hotel outside Wodonga. The hut was used as an office with the points lever outside to switch trucks to different tracks on the Bandiana and Cudgewa lines.This item is significant as it was part of the railway line to Cudgewa which played an important role in North east Victoria carrying freight during the construction of the Hume Weir and the Snowy Mountains Scheme.A section of flat plate. These plates were used in pairs to connect the ends of adjacent rails in railway track. victorian railways, cudgewa rail line, railway components

953.1 - photo of tram 32 being lifted and a low loader being positioned under the tram. Appeared on page 1 of Courier. Caption notes as the last tram to be given away and Mr. Bob Davies directing the move and that he has assisted in many of the moves so far. 953.2 - continuation of page 1 item on page 2 - about tram 32 being give to the Maryborough Chamber of Commerce. Mentions trams in the care of the BTPS, Lake Goldsmith and other organisations. Quotes SEC Administrative Officer Mr Norm Pearson. 953.3 - as for .1 and .2, but entire front page from The Courier. Additional copies of 953.1 and 953.2 added 30/05/06 ex Leslie Dawson. 953.4 - Black and white Courier photograph print of the photograph of No. 32 being lifted. 953.5 - Black and white Courier photograph print of No. 32 being lifted off the truck with No. 30 in the background .4 and .5 - Print of original photographs added 14-3-2016 from the donation to the Museum by Karelyn Satter Feb. 2016. Stored in box 01-01-84Yields information about the storage of trams at the Ballarat North Power Station following closure of the SEC operated tram system, period to delivery of the tram to its next owner. Has a strong association with the crane company of the time.Newspaper clippings from The Courier, dated 17/3/1973dates in blue ink of "17/3/73" near top right hand corner of both cuttings., Prints have the stamp of the Ballarat Courier on the rear.trams, tramways, maryborough, tram disposal, secv, tram 32

Although the Kiewa Hydro-Electric Scheme was first proposed in 1911, construction did not commence until 1938. As part of the push to cut electricity costs and diversify supply, the Victorian Government (circa 1930) initiated the conversion from primarily brown coal supply to hydro – electricity. Field investigations during the 1940’s resulted in a new proposal for a scheme that had more than double the capacity of the 1938 scheme. The Kiewa Hydroelectric Scheme became the largest scheme of its kind in the State Of Victoria and the second largest scheme in Australia. The number of personnel involved in the planning and construction of the scheme increased dramatically. During the late 1940’s, most activity centered around the construction of the West Kiewa Power Station, Rocky Valley Reservoir, McKay Creek Power Station and the Bogong Creek Aqueduct.A common thread across all the larger hydro scheme constructions was the need for workers, both qualified and unqualified who came from around the world seeking a new life for themselves and their families. New accommodation and facilities were required for the army of workers engaged in construction in often remote and wild areas. The SEC had a high demand for timber, and set up the first of a number of sawmills at Bogong Creek in 1939 and set up the first hardwood logging in the headwaters of the Kiewa River. These new ‘towns’ such as Mt Beauty and Bogong, survived, serving the needs of operational personnel and their families, and expanding with growth of new industries. Mount Beauty, and to a lesser extent Bogong, are among these places. Large A3 size spiral bound display folder containing photocopied black and white photographs of various aspects of the early days of the Kiewa Valley Hydro-electric scheme including equipment, various work sites and photographs of workers and their families. 1-Breakdown in Circuit Breaker (Isolating Contacts) 2-Big Hill Bench- Site of No 5 Devlopment 3-No 1 Power Station 4-No 1 Pipeline, Anchor No 8 5-Push Dozing-RD8 Tractor 6- Tractor and driver at work 7- Workmen in unnamed tunnel 8- Front page of Journal of SECV Vol 15. Photograph of No 1 pipeline viewed from McKay Portal 9-Rocky Valley Dam Core Wall 10-Workmen working inside tunnel loading rocks into a rail truck. 1-Breakdown in (generator) Circuit Breaker (Isolating Contacts) Handwritten underneath (This is not a picture of any part of a generator. It is a circuit breaker Signed Ron White Ron was the Principal Hydro Engineer of the SEC Kiewa Scheme Page number 39 2-Big Hill Bench – Site of No. 5 Development (abandoned) Page number 40 3-No 1 Power Station Page number 41 4-No. 1 Pipeline, Anchor No. 8 Page number 42 5-Push Dozing – RD8 Tractor, 12 cubic yard Carryall and FD Cletrac Tractor Page number 43 6-No marking Page number 44 7-No marking Page number 45 8-Journal of State Electricity Commission of Victoria SEC Vol 15 No… April-May, 19… No 1 Pipeline-A view from McKay Portal G Hempenstall and D Sutton stiffening pipe section for transport during construction (….indicates missing text) Page Number 46 9-Rocky Valley Dam Core Wall Page number 47 10-No markings Page number 48 secv; kiewa hydro electric scheme; construction area; power stations; reservoirs; aqueduct; mt beauty; bogong

Each photograph is captioned: .1) LHS: LT E P SEYMOUR (later LT COL) & CAPTAIN E E STEVENS, 1930's. RHS: Visit of the Duke of Gloucester to Bendigo 12.11.1934. The Duke centre with the Major speaks to LT PALMER, 17th Light Horse. .2) Top: Troopers of 17th Light Horse in Pall Mall in front of the Memorial Hall Bendigo. Officer is LT A V PALMER (later LT COL) on Snow; Bottom: Officers of 17th Light Horse at Bendigo Racecourse 1937. Centre front: MAJOR GENERAL G T RANKINM DSO, VD. .3) Top: SGTS of 17th Light Horse winning Assault Course Broadmeadows Army Camp 1927; Bottom: Officers 17/19th Light Horse at Bendigo Racecourse Camp 1932. .4) Top: Horse Llines 17/19th Light Horse 1931; Bottom: Sgts Mess 17th Light Horse Broadmeadows Camp 1927. .5) Top: 17th Light Horsemen trucking horses Bendigo Railway Station 1931; Bottom: Cohuna Troop of 17th Light Horse at Bendigo Racecourse Camp 1932. CAPT A V PALMER, CO centre rear. .6) Visit of Duke of Gloucester to Bendigo 1934, Escort official from 17th Light Horse Regiment in Mitchell Street. Duke & Major seated in rear of car; Bottom: 17th Light Horse Machine Gun Regiment with Vickers MG 1937. .7) 17th Light Horse as M G Regt Bendigo Camp 1937. LT A V PALMER, R SCHIER, A LEEDS with range finder; Bottom: 1939 Officers 17th Light Horse MG Regt at Bendigo. See also 2619P for larger named copy of this photograph..1) - .7) Collection of black & white photographs consisting of 2 photographs per card. Photographs are printed on red card. Copies of originals. .1) LHS: 2 Officers standing. RHS: Officer on horse speaking to 2 men on foot. .2) Top: Mounted troops; Bottom: Group of Officers standing. .3) Top: Mounted troops charging with swords drawn; Bottom: Group of Officers. .4) Top: Line of horses with 2 Troopers attending; Bottom: Group of Sergeants. .5) Top: Troopers loading horses into a railway truck; Bottom: Group of Troopers. .6) Top: Officer riding a white horse through a crowd; Bottom: Machine Gunners training. .7) Top: 3 Light Horsemen using a range finder; Bottom: Group of Officers.photography-photographs, military history - army, passchendaele barracks trust

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded), until the time that cheaper containers were invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle, to contain milk, required its thickness because of the extensive handling (man and machine) before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle is a circle within it "6/35" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "20"milk, dairy, glass bottle