This trade mark (V inside a clover) was German. It was used by the lamp makers Veritas Efsca Works in Birmingham, and for a time by Valor Co. Ltd. which took over Veritas. Valor Co. Ltd. was established in Birmingham in 1890 and produced oil containers for the Anglo-American Oil Com. In 1901 the firm advertised themselves as Stampers And Pieces. Later it was named 'The Valor Co. and was associated with the Aston Brass Co., and advertised as makers of oil lamps and stoves. Valor became a maker of oil heaters cookers and many other products that were fueled by oil. Later it sold gas heaters and ovens. In 1936 Valor Co. Ltd. was made a Public Company and operated under the name The Velor Company Ltd. The company changed names over the years and it was still operating under Velor Fires in January 2002.Oil or kerosene lamps were the means of lighting for homes, farms and industry in the late 19th and early-to-mid 20th centuries. Lamps like these were important as Lighthouse Keepers and Assistant Keepers' equipment. They were in common use in until the lighting was powered by gas and electricity. The reflector at the back of the lamp makes it of greater significance as most lamps don't have this feature. The logo is also interesting as it originated in Germany and was used with permission by a British company and the company that brought it out for a short time. Similar lamps are still available today, usually with gas for fuel. Kerosene lamp; blue painted metal fuel can and metal rear reflector support. and a round corrugated reflector at the rear. The mid-section wick is made of brass. The glass cover or chimney is bulbous in shape. Inscriptions include a trademark "V" inside a clover. It is British-made in Birmingham by either Veritas Efsca Works or Veritas Valor.Trademark; "[clover symbol] surrounding a "V" Stamp: "BRITISH MADE" Marked on adjusting device: "English Made 1 in w" Marked on support of deflector shield - "British Made" and symbolwarrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, oil lamp, table lamp, kerosene lamp, valor co. ltd, v inside a clover, veritas, british made, lamp reflector, lighting, lamp, the valor company ltd

Also known as the King George V memorial building this branch of the Mission to Seamen opened in 1937 as a replacement for the old Mission in Port Melbourne. The Foundation stone was laid by the Victorian State Governor and a photograph of the event is also held in the MTSV collection. The Art Deco style building was commissioned by merchant and philanthropist, Alfred Michael Nicholas (1881-1937) and designed by prolific Melbourne-based architect Harry A. Norris (1888-1966) in 1937 best known for his commercial work in Melbourne city centre. NB PMHPS Kindly allowed MTSV heritage to take scans of the Kelly series notes in their collection for reference in 2019.One of the few full colour images of this building originally classified by the National Trust and now demolished. An example of architect Harry Norris' work 1937. All that remains are a ceramic plaque, a brick and several items of chapel artefacts. Alison Kelly, a photographer, was part of the group supporting the Port Melbourne Seamen's Mission in the 1980s and 1990s. She took a series of photographs of the building now held by the Port Melbourne Historical and Preservation Society.Full colour Postcard featuring colour image of a large red brick building in a 1930s era Architecture. There is a green wrought iron gate ajar in the foreground with the word SEAMAN spelled out. MISSIONS TO SEAMEN can also be seen spelled ut in white across and down the central clock tower of the building and this is surmounted with a white flagpole.On verso: Printed: "Heritage Series / POST CARD " at right angles in small print from lwr edge to upper: "PHOTOGRAPHY BY ALISON KELLY PORT HERITAGE SERIES NO 6". At Lwr left crnr printed:" Missions to Seamen Building, Port Melbourne/ Designed in the Modern style by architect Harry Norris,/ this 1937 National Trust classified structure was until 1972 / an entertainment and spiritual centre for seamen, with / important roles during the war [WW2] and immigration periods"king george v, memorial chapel, harry a. norris, brick, art deco, alfred m. nicholas, beach street, mission to seamen, alison kelly, 1937, arts centre, seamen mission, mission to seafarers, port melbourne

Part of standard issue equipment to front line servicemen for first aid. Issued to Robert G. Jackson. Posted to Butterworth in 1966-69 as Flight Sergeant.Small compressed Brown packet made of paper with yellow label affixed on both sides. Label has black writing, Packet in middle has white pull strings so that package can be ripped open easily. Contents of packet is a white sterilised bandage to be used on burns. On both ends are instructions on how to open packet.Labelled - "Standard dressing B.P.C. No. 11 Medium burn dressing" followed by directions for use. Instructions on both ends - "To open packet pull tape".medical, butterworth,

Satchels such as these were commonly used by young boys to carry their lunch and school items between school and home. They were used commonly in the days when much of the requirements such as slates and paper were used as class sets. They proved to be serviceable and required only the most basic of maintenace as in stitching, to be kept in good order. Being adjustable they would also serve a student for a number of years.No information is available on Henry Alexander Cain of Surrey Hills.A common item with which many people would identify.Brown leather rectanular satchel with gusset on either side . It is fastened on the front with two metal buckles and has four adjustable leather back straps attached to the bag with metal studs. These are adjustable through holes in the leather straps. Likewise the front straps can be fastened in a number of different holes. The leather has an overall snake skin pattern.Solid leather is stamped in the leather on the front. henry Alexander Cain ******Rd Surrey Hillswarrnambool, school history, boy's school bag

This is the MINJAH telephone exchange testing unit. The exchange was adjacent to the property of MINJAH which is situated near Hawkesdale in Western Victoria. The exchange operated between 1955 and 1985. The testing unit was used for detecting and testing faults in the telephone system. The keys along the front were called "Hospital Keys" and were used to give subscribers a temporary connection in the event of a break down. The telephone exchange was replaced by an automatic exchange.This is a good example of a manual telephone system in Western VictoriaThis is a rectangular polished wooden box with a telephone mechanism on the side connected by a hook. On the front right is a dialling system which has been detached. On the front left is a volt meter. At the front bottom are seventeen switches. In the middle front are twenty keys which can flash up in various colours. There is writing on the side . There is a black metal label with writingAVD HAND SET S314470 c 7060 H/56 LINE & SELECTOR TEST SET HT& Co. Ltd. LIVERPOOL ENGLANDtelephone testing, minjah, manual telephone exchange

Safety razors were fist produced in the late 1800s by the Star Razor Company in U.S.A. and it was a former employee of this company that produced the Gem Safety Razor in 1898. The Gem razor, to be produced in later years by the American Safety Razor Company, became one of the world’s most popular razors and in the 20th century it was the major competitor to the Gillette razor produced in the U.S.A. The safety razor has been largely superseded by the disposable razor blade and the electric razor. This safety razor has no known local provenance but it is retained as an example of the type of safety razor used in households for the most part of the 20th century.This is a silver-coloured Gem safety razor in a rectangular green Bakelite box. The box lid has metal pins acting as hinges and inside the box there are moulded sections to ensure the razor fits snugly into the box. The razor handle has an etched decorative pattern and the top part opens so that a blade can be inserted. There is a blade in this section. On box: ‘Gem’ Blade: ‘Gem Double Life, Gem Blade, British Made’ Inside the razor: ‘Gem Brooklyn New York Made in U.S.A.’ gem safety razor, history of warrnambool

The people in the photograph are unknown. No date is recorded. This photograph is part of the Hugh Price collection. P000065, P000066, and P000067 are all part of the Hugh Price collection.This photograph shows how big Murray cod are.This is a rectangular black and white photograph of a man and three young children standing in a boat. The man is standing on a container and holding a very big Murray Cod. To his right is a seated girl in white; to his left is a boy in shorts wearing a hat. Part of a young girl can be seen in the left hand corner of looking back at the camera.Written on the back in lead pencil are the words; Price and Cod.murray cod, price family collection, fishing

The clinometer sight was attached to a Vickers .303 machine gun and used for long range fire or a fixed line of fire. Brass and steel clinometer sight. The top of the sight featured a spirit level. At each end there is a brass and steel winder that can depress or elevate the sight which rides on a semi-circular copper coloured slider. The brass scale on one side is graded in five degree units. A base plate for attaching the item to a machine gun is missing.On side one: 'DEP DEGs, ELEV DEGs' On side two: 'MADE IN AUSTRALIA, F. TOUGH 1942, D(upward arrow)D, A.1553, CLINOMETER SIGHT (MARK IV)'military equipment, clinometer sight, machine gun, vickers

Two photos from a Monash University Gippsland Campus graduation. .1) Owen Townsend, double degree in Civil Engineering and Business .2) L-R Leon Soste (lecturer), Owen Townsend (Graduate) and Jim Jarvis (Head of Engineering School) If you can assist with infrormation on this photograph please use the email link below. gippsland campus collection, gippsland institute of advanced education, leon soste, owen townsend, jim jarvis, engineering

This chisel was specially modified to be used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This chisel is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This chisel was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Grooving chisel, metal blade and turned wood handle. Round wooden handle has been bent and cut on one side so that it can be used in small difficult areas. This chisel is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, model making tool, chisel, sovereign of the sea, ship model, hobby, ship model tool

This photograph taken by the Australasian, depicts the central Institute in September 1917. It was published on the 15th of September 1917 along with other photographs taken during the dedication of the St Peter chapel on the 6th of September. The photograph was also used in a Jottings mentioning "Courtesy of the Australasian".This is one of the first photographs of the Mission's building opened in 1917 before the Norla Dome was erected in 1920. Black and white postcard with a photograph taken at a 45 degree-angle showing the front of the mission in Flinders Street probably in 1917. Three men are standing in front of the church and three cars are parked in front of the mission. The Flying Angel flag. Behind the mission we can see the masts probably from ships berthed on the Australian wharf.Right bottom corner: Seamens Church and Institute, Melbourneflinders street, melbourne, central institute, walter richmond butler, men, cars, sailors, seamen, mission to seamen, seamen's mission, mission to seafarers, flying angel flag, australian wharf, ships, australasian, 1917

The SS Maloja was a passenger liner operated by The Peninsular and Oriental Steam Navigation between 1923 and 1954. The ship was requisitioned by the Admiralty for service as an Armed Merchant Cruiser upon her arrival at AdenB & W landscape photograph with view from the dock of nearside port bow and superstructure of a moored ship. Men at dockside level are loading or unloading with net in foreground. railway vehicles are lined alongside under a shed. A faint series of letters can be made out near the portholes towards top of bow. This could be name of the vessel. Handwritten in black ink beneath lower edge of image on album page as "P O Maloja" (this may be misnamed) see notes belowsteam ships, world war 2, p.o. maloja, ss maloja, p & o, peninsular and oriental steam navigation company, fan album

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.Steel vice with 5 rods at right angles to the bottom plates and a handle on the opposite side attached to the square shaped rod. The handle is covered with a wooden hand piece enabling this square shaped rod to be rotated for winding bandages. The other 4 rods are cylindrical. The handle of the vice can be screwed down to fit onto a table or bench.Handle of the vice: '2697'bandage winder, medical, hospital, tawonga district hospital

The 1950's saw a revolution in small appliances for use in the average household. This hand held wrench was provided exclusively for the Coleman self heating kerosene (KVHS 0347A) iron and used for the regular changing the kerosene used in it. The iron was used before and during the electricity supplies available from the Kiewa Hydro Electricity Scheme. These irons remained in use within regional rural areas that had limited or unreliable electrical reticulation. Kerosene supplies were cheaper than electricity but also more inconvenient than electric. Electrical appliances become cheaper to buy and maintain in the later part of the 1900's and the now older kerosene iron was faded out.This wrench was required to open the fuel container which stored kerosene in the Coleman hand iron(see KVHS 0347A). This item was part of the maintenance requirement of this particular hand iron. In the 1950s and later the Kiewa Valley was still a relatively isolated region which was home to rural properties and small settlements. The availability of electricity and or the financial means to afford new types of electric hand irons ensured that older and sometimes less efficient ironing remained for an extended period covering the 1960s to 1970s. Kerosene products, such as this kerosene iron was a cheaper method for farm based domestic and other rural activities requiring a heat source. The use of kerosene as a heat/light source was able to be supplied in bulk and able to be used when floods severed vital roads into this region. The supply of electricity was in summer time subject to interruption from bush fire damaged wooden poles carrying the electrical cables. Self sufficiency by rural populations was the backbone of survival(use of this wrench was a part of rural life). The ability to store energy sources "on the farm" was a prerequisite of isolated regions, such as the Kiewa Valley, circa 1950s.This item is a flat cast iron wrench, which has been specifically made for KVHS 0347A (kerosene iron). The wrench has four specific forms cut into the steel which fit firmly around their targeted nut and other fixtures. Also see See KVHS 0347B- Instruction sheet; and KVHS 0347D Fuel can.ironing, iron maintenance tool, domestic appliances, household

Blackout lantern used in WW11. This type of lantern was used during both World War. It is an artillery siege lamp and was originally used by artillery units. The lamps were powered by a single candle, the light being magnified by a lens. A shutter closes over the lens to give an illuminated vertical line. They were used originally in fortified siege artillery positions as a general purpose lamp. They were also used as aiming lamps when they were placed in front of artillery positions and used as a guide in aiming at night. These lamps were often used on the front of bicycles to guide at night. Donated by Clem Heather. Forestry Commision, carved faces on trees with axe., builder of tall. spliced single pole fire towers. This item is considered rare and important. It is historically and technically siginficant at a national level.Small black metal blackout lantern with handle. Front of lantern has round shield with small slit - small door at side for easy lighting of candle. It is hand held or placed on flat area, open base so candle can be inserted and 'screwed' in. Front is a magnifying glass and it has metal lens cover with vertical slit. lantern blackout ww11 military candle-power lamp

Used at Orbost Hospital where it was used for testing the temperature of bath water. It was donated to Orbost Historical Society in 1991. This is a floating bath thermometer made in Germany for the British market.This item is associated with Orbost Hospital and is an example of an early medical instrument.A glass tubed thermometer in a wooden case with temperatures for bath water written on it. Has a red "Orbost" label glued to it indicating that it was used at Orbost Hospital. The thermometer is housed inside a wooden frame that is stoppered with a cork at the base. It is in degrees Fahrenheit and includes water and spirit boiling temperatures, as well as hot, warm, tepid and freezing points. Can be hung.Made in Germany. Dr Forbes specifications.thermometer-medical

The kerosene lamp was one of the most common oil lamps used and was manufactured until the 1980s. This lamp appears to be a modern reproduction of an earlier optional wall-mounted kerosene lamp. The lamp has been produced as an example of a 19th and early 20th-century marine kerosene navigation lamp. Marine lamp; portside metal kerosene lamp with two flat sides, and a curved front. The front has a red ridged glass lens insert and the name "port" is inscribed on a fixed brass plaque. A round chimney is on top of the lid and it has a catch. The fuel tank and wick can be removed through the base. The metal appears to be electroplated.Inscribed on the plaque; "PORT"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, lamp, ship lamp, port lamp, marine lamp, navigation lamp, port, lantern, kerosene lamp, marine technology, ship light, portable lamp

Frank Wright was a renoun resident of Smeaton, where he was born on 2 August 1901. He lived at Laura Villa, and attended Smeaton State School. His father William was a gold miner and his mother's name was Sarah. Their family won many singing and instrumental awards. Frank was tutored by Percy Code and was awarded a gold medal for the highest marks in the ALCM examinations in the British Colonies at the age of seventeen years. He became the Australian Open Cornet Champion by the age of eighteen. A year later, Frank conducted the City of Ballarat Band, and later the Ballarat Soldiers’ Memorial Band. He formed the Frank Wright Frisco Band and Frank Wright and his Coliseum Orchestra. These bands won many South Street awards, and Frank as conductor won many awards in the Australian Band Championship contest. In 1933 Frank Wright sailed to England to conduct the famous St Hilda’s Band and was later appointed Musical Director of the London County Council, where he organized many amazing concerts in parks, in and around the London district. He was made Professor of Brass and Military Band Scoring and conducted at the Guildhall of Music and Drama. Frank was often invited to adjudicate Brass Band Championships around Europe, in Australia, including South Street and in New Zealand. The Frank Wright Medal at the Royal South Street competition is awarded to an individual recognized as making an outstanding contribution to brass music in Australia. He died on 16 November 1970.Black and white photograph of the torso of a young man dressed in a dark suit and tie. The camera is pointing upward so the background is of the underside of a verandah roof and part of the brickwork of the chimney a house upon with have been placed a couple of objects including a can. The man is Frank Wright and the place could be the family home, Laura Villa at Smeaton.frank wright, laura villa, musician

This photograph is of the 1916 Easter Carnival. G.T. Allnutt, in uniform, and on horseback, is leading the parade down Charman Road, from the Cheltenham Temperance Hall, where the parade commenced, to the Mentone Recreation Ground.A black and white photograph. G.T Allnutt is riding on his horse along the Charman road from Cheltenham on the left of this photograph. There are several people along the Charman road with also 5 horse carriages and a marching band. You can see in this photograph that there are a few shops on either side of the road, such as a shop called Tobacconist, which is on the left. Photo mount ; Charman Rd Early 1900 / Cheltenham 1916, easter carnival, g.t. allnutt, horseback, temperance hall, mentone, mentone recreation ground, charman road, parade, cheltenham, horses

Colour photograph of the Central Deborah mine. Left foreground is tram No. 21, and the conductor is moving away from the tram towards the mine. To the left of the conductor can be seen a garage of a private residence. Mining infrastructure in the form of building. A small green car and the rear left corner of a small caravan. Notre the small building on the lower level of the poppet.mining, surface equipment, central deborah mine

Envelope for Brian Murray's Camera World - 90/92 Firebrace Street, Horsham 3400 Phone (03) 53811480. Fax (03) 53811903, The name Lowerson 1/2 written in blue pen at the centre. On the back Kodak express Quality you can trust. The envelope contained 13 photos catalogue numbers from 11518.329 to 11518.341business, retail, photography

Question written on blue paper. Date 15 February 1864. Secretary's signature illegible. Question was whether it is legal for a Quarterly District Meeting to appoint or Call a Special District Meeting for the purpose of making arrangements for holding the Anniversary of the District & whether any member, or Court can be fined for not attending that Meeting, or held responsible for any loss, if any.societies, aof, correspondence, ancient order of foresters no. 3770 collection - correspondence, high court

Small black and white photograph of the Royal George Hotel. Two men and a boy are standing at the front. On the back: photographed by Chevalier, Pall Mall Sandhurst, branch establishment. High Street, Eaglehawk, opposite church of England. The negative plate from which this photograph was printed being retained, similar copies can at any time be obtained.buildings, hotel, royal george

Document. Greeting Cards. Single card with a blue bowl of red, pink & yellow roses on a table. In the background is a house & shrub which can be seen through an open window. Underneath is: 'In quietness and in confidence shall be your strength' Isa. 30.15. Printed in blue, brown & red. Two holes at the top with a pink piece of cord to hang the card.G.0357 Printed in Englandperson, greeting cards, malone collection, malone collection, greeting cards

Orange label with black printing for Hop Beer brewed by C. J. Glover, Chapel Street, Bendigo. Has a decorative border with flowers and leaves. Stuck to the front of it is a white label with black printing for Ammoniated Tincture of Quinine. Label gives the dose and what it can be used for. T. R. Jones, The Hargreaves St. Pharmacy, Bendigo.business, printers, cambridge press, cambridge press collection, t r jones, c j glover

Copy of a photograph taken of a group of men outside the corner shop at Bridge and Ross Streets. The shop is diagonally opposite from the present-day milk bar. The upper floor of the milk bar can be seen in the reflection in the window. Main people (left to right): Joe COOPER, Frank ?, Bill DAVIS, Micky McNAMARA, "Big" Frank COMAZE.built environment - commercial, joe cooper, bill davis, micky mcnamara, 'big' frank comaze