Isaac Sherwoods Ltd were manufacturers of oil lamps and burners in Birmingham, in 1904 they were trading as Isaac Sherwood & Son Ltd. but by 1920 they had taken over Linley & Co. of 73-75 Great Lister Street, makers of `American' pattern lamps to become Sherwood-Linley at Nechells Park Works, Eliot Street. The company were a leading manufacturer of oil and candle lamps exporting their goods all over the world. The subject lamp is operated with a candle, which is inserted on the underside, it is sprung and as the candle burns the spring keeps the candle pushed upwards keeping the flame burning until the candle is extinct. Sherwoods invented and patented this innovation for candle lamps.The subject item is incomplete however it has some significance as it was designed to be used in a sea going vessel, as a result is quite rare also the item is made by a well known manufacturer.Spring loaded candle Lamp, brass, with gimbal wall attachment for use on a ship, shade and mount missing. Candle-stop has the words "Sherwoods Limited, trademark sound".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, candle lamp, gimbal spring, sherwoods limited

Candle Lamp. With Candle. 4 Glass Panels on each side.. Conical top with small air holes and carry handle. Glass sides slide to allow access. Metal frame painted black. Width and Depth 120mm, height 200mm

Probably converted on property.FOUR CANDLES lamp holder. Recycled 4 Gallon square drum converted to a lamp holder. Has three glass sides and a handle on top - wooden reinforcement on base. Glass is missing and broken.

Displayed at History HouseSheet-metal lantern with cubed lantern mounted on cylindrical handle. Two sides are full-pane thick bevelled glass, one tin with concave reflector panel on inside and one side with hinged door with red glass circle mounted in the middle. Painted black with black chimney and hood. Brass edging to glass panes.Front: Goodwin & Co/Birmingham (metal embossed plaque, candle mount).port of portland archives

"Rangoon" Wooden three mast barque of 379 tons, built Sunderland, England, wrecked 22nd March 1870 at the mouth of Minnamurra River between Kiama and Shellharbour NSW AustraliaThe donor's grandfather was Master of the shipLamp - Candle Holder supported by brass bracket, screw cap and spring missingbarque, rangoon, lighting equipment

The lamp has been manufactured for decorative used, representing lamps of the late 19th and early 20th century used for lighting.The lamp is an example of a 19th century ships lamp. It is currently not associated with a historical event, person or place at this time and is being used to augment Flagstaff's village display.Metal lamp with circular base, 8-sided glass section and conical lid topped by a frilled metal cone and handle made from a strip of metal bent into a 'u' shape and attached so that it can swing back and forth..Cone hinges to side to give access to candle, which is seated in a short ring in the centre of the base. There is a ring of air holes around the circumference of the cone, about half way up the height of it. A shard of glass missing from one of the glass panels and the metal parts are corroded.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, lighting, candle lamp, domestic lighting, ship lamp

Artie Dibbin, local Freeburgh identity, cattle grazier, horseman, miner and larrikin, had an alluvial claim, next to the Great Alpine Road at Freeburgh, called the "Goat's Arse". This candle holder or "spider" was used by Artie in this and other mines, including the Mount Orient.Relevant to the gold mining history of the area. Miner's spider made of bent metal.mining, candle, lamp, spider

Relevant to the gold mining history of the area.Miner's spider handmade of twisted wire. Contains remnants of candle in situ.mining, candle, lamp, sider

Spring loaded Candle Lamp candle stop, brass. Candle-stop has the words Wm. Blews & Sons Makers London for Palmers Patent Candles. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This item type was used during the First World War throughout Europe. This item is an artillery siege lamp. It was used by artillery units. The lamps were powered by a single candle, the light being magnified by a lens. A shutter closes over the lens to give an illuminated vertical line. They were used originally in fortified siege artillery posititions as a general purpose lamp. They were also used as aiming lamps when they were placed in front of artillery posititions and used as a guide in aiming at night. Further research has suggested that this item may have been attached to bicycles for illuminating the way in the blackout.This item is considered rare and important. It is historically and technically siginficant at a national level. Painted black metal(tin) candle power, hand held or placed on flat area, open base so candle can be inserted and 'screwed' in, side door for lighting, fron magnifying glass, metal lens cover with vertical slit. There is considerable damage to the black paint in the external regions of the lamp.world war one, military, candle, artillery, europe, lamp, black, artillery siege lamp, artillery units, candle power, aiming lamp, wwi, 1900, australian war memorial, bike light, bike, bicycle, bicycle lamp, blackout

Blackout lantern used in WW11. This type of lantern was used during both World War. It is an artillery siege lamp and was originally used by artillery units. The lamps were powered by a single candle, the light being magnified by a lens. A shutter closes over the lens to give an illuminated vertical line. They were used originally in fortified siege artillery positions as a general purpose lamp. They were also used as aiming lamps when they were placed in front of artillery positions and used as a guide in aiming at night. These lamps were often used on the front of bicycles to guide at night. Donated by Clem Heather. Forestry Commision, carved faces on trees with axe., builder of tall. spliced single pole fire towers. This item is considered rare and important. It is historically and technically siginficant at a national level.Small black metal blackout lantern with handle. Front of lantern has round shield with small slit - small door at side for easy lighting of candle. It is hand held or placed on flat area, open base so candle can be inserted and 'screwed' in. Front is a magnifying glass and it has metal lens cover with vertical slit. lantern blackout ww11 military candle-power lamp

These lamps would have been used in the late 19th and early 20th centuries for outdoor, industrial, or domestic lighting, before the widespread availability of electric lighting. The left lamp is a traditional lantern, likely used for portable lighting, either carried by hand or hung on a hook. It could have been used on farms, in railway stations, or in military settings. The right lamp is an oil or kerosene lamp, possibly wall-mounted and used in stables, workshops, or early automobile garages. The reflector helped to direct light forward, making it more efficient in dimly lit spaces. Both lamps have significant wear and damage, indicating long-term use and exposure to the elements.The image shows two old metal and glass lamps, both exhibiting signs of heavy wear and damage. Left Lamp: A rectangular lantern-style lamp with a metal frame and glass panels on all four sides. The glass is cracked and broken, with missing sections, and the metal frame is corroded and bent. A metal loop handle at the top suggests it was meant to be carried or hung. The interior appears hollow, where a candle or oil lamp would have been placed for illumination. The metal has a dull silver-grey finish, likely due to oxidation. Right Lamp: A cylindrical oil lamp with a flat back and a hinged metal reflector at the top. The base contains a round opening, likely where the wick holder and burner were originally inserted. The metal body is painted or enamelled, but the finish is chipped and worn. The top reflector is bent and dented, but the hinge remains attached. The flat back suggests it was a wall-mounted lamp, possibly used in barns, workshops, or railway applications.lamps, kerosene, lamp, candle, light

(Candle Holder 1) Likely used as a bedside or household candle holder in the late 19th or early 20th century. The enameled surface suggests it was made for durability and ease of cleaning. The handle design indicates it could be portable or mounted on a wall. (Candle Holder 2) Could have been used in homes, barns, or workshops for lighting. The metal construction suggests it was a practical and durable design. The reflector would have helped maximize light output, making it useful in dimly lit areas. (Lantern 3) Likely used for outdoor or travel lighting, possibly in the late 19th or early 20th century. The enclosed glass design suggests it was meant to protect the flame from wind and rain. Could have been used in homes, farms, or for transport by foot or carriage.(Candle Holder 1) A round, shallow dish-style candle holder with a central cylindrical candle socket. It has a curved handle on one side for carrying or wall mounting. The surface appears to have remnants of white enamel coating, which is chipped and worn. (Candle Holder 2) A round metal candle holder with a shallow dish and a cylindrical candle socket. Attached to the back is a small flame snuffer. (Lantern 3) A rectangular metal lantern with glass panels on the sides. Features a peaked, vented top for heat dissipation. A candle is visible inside, secured in place. The frame appears to be reinforced with metal wire.lantern, light, lamp, candle holder, candle, household item

This signal lamp was originally fitted on the steam tug 'Wattle'RAN Career 1932 to 1969: Wattle's construction and career as a non-commissioned vessel of the Royal Australian Navy. Saved from the Scrapyard 1969 to 1979: Sydney-based enthusiasts rescue Wattle from the scrapyard, forming an association with Sydney Heritage Fleet. Melbourne Pleasure Steamer 1979 to 2007: A volunteer group brings Wattle to Melbourne to restore, then sails Port Phillip on outings and excursions. Restoration Journey 2007 to 2015: Wattle is hoisted onto the hard to undergo major restoration work. Back in the Water, 2015 to present: Wattle returns to the water for further restoration, and in 2019 sails again on Port Phillip.Brass candle powered signal lamp with a lens circumference of 14cm, mounted on a timber plinthSundercombes Patent Eclipsesignal light, marine fittings, steam tug 'wattle'

Tin Buggy Lamp with candle. Small glass window. Bracket for attachment. Liddle Family stawell

Spills and tapers were used by early settlers in Moorabbin Shire to light fires, candles and gas lamps. . Late 19 century. A light-wieght black enamelled tin for holding spills and wax tapers. Spills and tapers were used to light fires and gas lamps. The tin is decorated with gold scrolls, and green and blue flowers. The paint work is damaged. No makers mark.kitchen equipment, lights, candles, fireplaces, early settlers, pioneers, moorabbin, bentleigh, cheltenham, market gardeners

Wax tapers were used by early settlers in Moorabbin Shire to light fires, candles and gas lamps. A narrow and shallow, cardboard box with blue and white label on the top. "Price's Dropless White tapers" " Medium" 2ounces "for lighting candles and gas fires". Makers mark is a sailing ship, set in an oval with the words "Ship Brand". Around the circumference of the oval are the words " London, Liverpool, Price's Candle Company Limited.kitchen equipment, lights, candles, fireplaces, early settlers, pioneers, moorabbin, bentleigh, cheltenham, market gardeners

Early Settlers used candles and lamps as their source of light after sunset. This lamp, uses a flat wick immersed in kerosene or oil, contained in the bulbous reservoir, with a side screw to adjust the flame enclosed in a glass, open top shield.A flat wick kerosene lamp. The knob protruding to the right adjusts the wick, and hence the flame size. This lamp has a plain blue glass shade -chimney with a fluted rim, blue glass geometrically engraved reservoir and a circular brass base early settlers, pioneers, market gardeners, moorabbin, brighton, bentleigh, ormond, mckinnon, lighting, lamps, kerosene, paraffin, oil

This candle holder would probably be mostly used for a candle placed on a table, cupboard or bench. It is unornamented and so would not occupy any place of importance. Candles and lamps were the chief source of light in households until the advent and use of electricity in the early 20th century. Gas lighting was in use in street lighting and in industry for some time before this. Electric lighting for households became available in Warrnambool in the 1920s but the use of lamps and candles was still prevalent until the middle of the 20th century. This candle holder is of some interest as an example of a household item from times past. It will be useful for display. This is a china candle holder. It has a white glaze and the base is circular in shape. The rim or lip is ridged around the edge. One side of the object is cracked. household lighting, history of warrnambool, candle holder

In 1832 William McGeoch & Co., Ltd was established, by William McGeoch senior at 113 Argyle St Glasgow as hardware merchants and exporters, and later were manufacturers of lamps and electrical fittings for ship, railway and domestic use. In the 1900s the company had expanded and had offices at 28 West Campbell Street Glasgow with a factory and warehouse located at the Warwick Works, 46 Coventry Rd, Birmingham. In 1922 the company had expanded and were employing 400 to 500 people. William seniors three sons had joined their father in establishing the business around 1888. The business was run by William McGeoch senior with Williams three sons Alexander, William and Andrew also taking an active part in the day to day running of the company. The company had expanded to such a degree that they were now manufacturing a variety of ships' hardware. This included metal cabin furnishings, signal lamps, ships' oil and candle lamps, motor lamps, switches, switchboards, electrical accessories and fittings. In 1982 William McGeoch & Co., Ltd was acquired by Bowthorpe Holdings Ltd.A lamp made by a significant manufacturer of marine equipment that made fittings for many famous ships including the Titanic.Marine oil Lamp with glass panels. Front panel missing. Access through glass panel door at side flat metal back. Metal fuel reservoir and no burner. Metal rounded chimney on top. Embossed McGeogh Maker Glasgowwarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lamp, ships lamp, wm mc geoch ltd, hardware merchants, ships outfitters

Black metal miners' lamp, rectangular base with 'pyramid' shaped, perforated, top section. Circular metal loop attached to top with metal pin. Glass sides with metal cross bar for protection. Candle holder inside lamp.gold mining, mining equipment, miners' lamp

A candle snuffer is an instrument used to extinguish burning candles. This is accomplished by smothering the flame with a small metal cup that is suspended from a long handle, and thus depriving it of oxygen. The use of a candle snuffer helps to avoid problems associated with blowing hot wax. Candle snuffers are still commonly used Churches. Prior to the introduction of gas and electricity, candles and kerosene lamps were used for lighting in households after sunsetEvery Early settlers depended on candlelight after sunset and candle snuffs were a safe, clean and efficient way to extinguish the candle flameThis candle snuff has a brass handle with a turned polished wood tip. The brass cup, that is placed over the flame to extinguish it, is decorated with an engraved brass moth.early settlers, pioneers, moorabbin, bentleigh, ormond, market gardeners, lights, lamps, candles

This candle mould was used in the past to make six candles. Molten wax or tallow, together with a central thread or cotton, were poured into the columns and when set were removed from the moulds. Until the advent of electricity in the 1920s in Warrnambool, candles, lanterns and lamps were an important source of lighting in homes. Few homes had gas lighting. Many householders made their own candles from waste fat etc. This mould is retained as an example of the way householders in the past made their own candles to assist lighting in the home. This is a mould with a rectangular base and six cylindrical hollow columns with pointed ends affixed to the mould base. The columns are topped by a rectangular metal tray with the openings of the columns in the base of the tray. There is a metal clip attached to one end of the tray. The mould is very rusty warrnambool history, candles

This container of 11 boxes of safety matches would have been a common item in a household during the first half of the 20th century and would have been used for the safe lighting of lamps, candles, room heating (fires), bath heaters, cigarettes, pipes etc. Safety matches came into use in the first half of the 19th century and the safety aspects have been improved after that time. Safety matches are still used today - for instance, when camping or in times of power failure. These matches are of interest as an example of household items in common use in the past. These are eleven boxes of safety matches (one box missing) wrapped in a buff-coloured paper cover with a label in red, blue and white colours with printing and an image of a dark-haired woman set against a white flame. Each box contains about 60 matches with a label similar to the one on the outside packaging. The matches are wooden with pink tips. The boxes have a rough surface on the side acting as a striking mechanism. The back of each box has a message containing some thoughts from thinkers and philosophers from the past.Ever-Brite Safety Matchesvintage lighting, safety matches, everbrite matches

Richard Liebreich of Germany invented his design of ophthalmoscope in 1855. This example is complete in its case with Coccius lenses and condensing lenses. Early ophthalmoscopes required an external source of illumination, eg lamp or candle, and light was reflected into the eye to be examined by the mirror on the ophthalmoscope. The earliest versions of the Liebreich ophthalmoscope used a polished metal surface to reflect light; glass mirrors were introduced in 1870. A condensing lens was held in front of the patient to view the image. A Coccius lens could be clipped into the holder to counter ametropia of user or subject.This Liebreich ophthalmoscope is significant for the collection as it is the only complete example of the three held in the collection.Cased Liebreich ophthalmoscope with 5 small coccius glass lenses and 2 glass condensing lenses. Non-illuminated ophthalmoscope has concave mirror in round head with central sight hole.Hinged coccius clip attached to hold lenses. Black metal head, silver coloured mount and black turned timber handle. Case has black leather outer lining and purple velvet and satin inner linings. Case hinged with snap closure. On front of case:"LIEBREICH'S OPHTHALMOSCOPE" 4 of 5 Coccius lenses engraved with powers: "8-", "12-", "-01", "+01"ophthalmoscope, optometry, ophthalmology, liebreich, coccius, lenses, eye examination, fundus, funduscopy, non illuminated, instrument, eye doctor, liebreich ophthalmoscope