This historic bronze nail dates back to 1790s to 1890s. Nails such as this one were used for ship building, as deck fasteners and many other uses. This nail was made at a time when the shanks of nails were usually machine cut but the heads were hand formed by blacksmiths. The nail was recovered from a shipwreck along the coast of Victoria in around 1968 and is part of the John Chance Collection. The nail is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The nail is historically significant as an example of the work and trade of blacksmith. The nail is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Nail; bronze, deck nail. Rounded rectangular head, rectangular shank cross-section, tip flattened to a rounded wedge shape. The surface is pitted and rough and has blue-grey, green and orange concretion and degradation on the nail's surface. Recovered from an unspecified shipwreck along the coast of Victoria. Part of the John Chance Collection. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, fastener, nail, square nail, machine cut mail, blacksmith, historic nail, bronze nail, hand forged, coastal shipwreck, victorian shipwreck

This historic bronze nail dates back to 1790ss to 1890s. Nails such as this one were used for ship building, as deck fasteners and many other uses. This nail was made at a time when the shanks of nails were usually machine cut but the heads were hand formed by blacksmiths. The nail was recovered from a shipwreck along the coast of Victoria in around 1968 and is part of the John Chance Collection. The nail is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The nail is historically significant as an example of the work and trade of blacksmith. The nail is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Nail; bronze, deck nail. Rounded rectangular head, rectangular shank cross-section, tip flattened to a rounded wedge shape but cut straight down at the end instead of a point. The surface is pitted and rough and has yellow and orange concretion and degradation on the nail's surface. Recovered from an unspecified shipwreck along the coast of Victoria. Part of the John Chance Collection. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, fastener, nail, square nail, machine cut mail, blacksmith, historic nail, bronze nail, hand forged, coastal shipwreck, victorian shipwreck

Used as a souvenir ticket and postcard on the opening day of the Electric Supply Co. of Victoria (ESCo), Ballarat tramways on 18 August 1905, Has been punched for the Mount Pleasant and Orphanage - Grenville St section. Collected by David Budge - 1879 - 1974, son of William and Mary Budge of Trevor St Ballarat, who worked for the Victorian Railways as a blacksmith residing in Walnut St Carnegie. Demonstrates a souvenir item for the opening of the electric tramways in Ballarat in the form of a postcard, which could be sent to others as a souvenir of the new tram system in Ballarat. Has a strong association with the collector.Postcard - size Souvenir Tram ticket, printed using blue ink on one side with fare, photos of power station, engine room, boiler room and a tram & No.2341 stamped on edge. On reverse side is space for stamp, address etc., - with line & "postcard' etc., printed in red ink. See item 608 for other examples.esco, opening, tramways, ballarat, tickets, postcards, david budge

Henry Froud's Blacksmith Coach Building and Wheelwright's business set up at original surveyed site west of present township, nearer to cemetery turnoff,. Business first moved to corner of Princes Highway and Bruthen Road, (now site of Black Stump Store), then moved to premises built by Harry Froud on south side of highway, corner of Punt Road, (present site of BP Garage).Black and white photograph of Harry Frouds first coach factory west of present township, showing three men in front of four wheeled vehicles including a steam engine. Three workshops in background, two having bark roofs, man in centre identified as Harry Froud, William Henry. Johnsonville Victoria. transport, factory, people, local history

Allied military badges collected during the Great War 1914 to 1918 by Private (Shoeing Smith) John BLAIKIE 2341 who was born at Wangaratta. He was a Blacksmith and at the age of 42 enlisted on May 28 1915. He embarked on August 10 1915 and served with the 14th Battalion. He returned to Australia in January 1918 and discharged as medically unfit on April 10 1918. Inset photograph is of John BLAIKIELarge collection of allied military badges collected during the campaigns in France, Belgium and Egypt in 1916-17 by John BLAIKIE 2341. A Blacksmith who at the age of 42 years enlisted in the Army and served during the first world war. On his return to Australia he was discharged medically unfit due to rheumatism and senility. He was a stalwart of Wangaratta RSL and his collection was present to the Sub Branch as a souvenir of the first world war.Brown timber frame in the shape of Australia containing a large collection of badges and small photograph Souvenir of the Worlds Great War 1914 to 1918 Military Badges Collected by J BLAIKIE 14th Batt 4th Div AIF In Belgium France & Egypt 1916-1917military badges, ww1

1 Russell Street was built in 1888 and from 1888–1905 (maybe 1911, as his death notice says he died at Russell Street) it was the home of James Burrell, a blacksmith. His smithy was on the corner of Canterbury Road. In 1893 a block of land (No.3 ) was bought to establish the fire station and James Burrell acted as fire officer and stored the reel and hose until the station was built. From 1911–1928 it was the fire station residence, as the brigade gained status. James Burrell (1860-1911) married Elizabeth Wilson (1862-1925). She was daughter of Edward Wilson. They had 4 children: James Herbert, known as Bert (1888-1953); Aleck (1890-1951); William Spencer, known as Bill, (1893-1976) and Elsie May (1898-1990). Both James and Elizabeth Burrell are buried in Burwood Cemetery. From 1930–1943 Michael Ginnane, retired station master, and members of his family lived in the house. Michael Ginnane (1864-1935) married Annie Mary Brock (1868-1945). Both were born in the Ballarat area. They had 10 children. From 1913-1917 he was station master at Woodend. In the 1925 electoral rolls the family is listed as living at Surrey Hills station. There was a station master's house adjacent to the station (demolished and the site now part of the car park accessed off Blackburn Street). They are again listed here in the 1925 electoral roll. By 1931 they are at 1 Russell Street and he is listed as a retired station master. The following children lived in Surrey Hills: John James (Clerk) - 1922 Mary Ellen (HD) - 1922, 1925, 1931 Michael Thomas (labourer) - 1922 Annie Florence (dressmaker) - 1925, 1931 William Patrick (railwayman) - 1925 Elizabeth Catherine (sales) - 1931 Patrick Leo (postman) - 1931. A black and white photograph taken on an angle from across the street of a mid-late Victorian style cottage with multi-coloured brickwork. There is a large tree in the front garden, no fence and a letterbox on a lean.(mr) james burrell, blacksmiths, canterbury road, surrey hills, fire officers, (mr) michael ginnane, station masters, fire stations, mid-victorian style, (miss) elizabeth wilson, (mrs) elizabeth burrell, james herbert burrell, aleck burrell, william (bill) spencer burrell, elsie may burrell, (miss) annie mary brock, (mrs) annie mary ginnane, john james ginnane, (miss) mary ellen ginnane, michael thomas ginnane; (miss) annie florence ginnane; william patrick ginnane; elizabeth catherine ginnane; patrick leo ginnanean), late-victorian style, russell street

William was a coach-builder, wheelwright and blacksmith. He moved from Prahran (13 Regent Street) to Surrey Hills to property owned by the family. The house at 34 Union Road was built in 1905 for William and his wife Emily. Their son Ernest worked with him as a coach painter and also worked as a painter undertaking intricate hand painting on early cars. Their other son Martin played for the Surrey Hills Football Club. In return for the support given to the club by Mrs Emily Kleinert, it built a rotunda in South Surrey Park as a memorial to her. Alan Holt research: Lot 6 was sold to Martin Kleinert by Karl Richter in 1860 together with a portion of another adjacent lot. From 1860-1885 Martin worked it as a market garden leasing some land for grazing when it was not required for gardening. He died in 1898. In a formal document, William declared he was the son of Martin "who purchased land in 1860, died in 1898 and the land has been continually occupied by father and family since. It has been cultivated as a market garden; when not being used for gardening it was let for cultivation and grazing." William died in 1939 and the property passed to his sons Martin and Ernest. The Kleinert land extended from Union Road to Essex Road. They ran horses, ducks and fowls and Emily Kleinert grew flowers. The Kleinert property later became the South Surrey Park. The family sold the land to the Camberwell Council in the 1950s. Ernest and Ida Kleinert lived on the corner of Scotsdale and Warrigal Roads. The donor of the photo Nada Harris, nee Kleinert, was Ernest and Ida's daughter. Ida lived to a good age (> 93 years) and in later life lived in Burwood. Many of the family are buried in Box Hill Cemetery. Friedrich Johann Wilhelm (William) Kleinert (1870-1949) married (1872-1937) in 1893. Their children were: Ernest Henry John (1892-1971) married Ida Grace Vassie. Ivy Louise (1898-1952) Martin William (1903-1964) Henriette Rose (Hetta Rose) 1896-1958.Black and white photo of William and Emily Kleinert and family. The children are L to R: Martin, Rose, Ernest and Ivy.surrey hills football club, blacksmiths, wheelwrights, coachbuilders, south surrey park, rotunda, friedrich johann wilhelm kleinert, william kleinert, emily florence radford, emily florence kleinert, ernest henry john kleinert, ida grace vassie, ida grace kleinert, ivy louise kleinert, martin william kleinert, henriette rose kleinert, hetta rose kleinert, rose kleinert, nada harris, nada kleinert

Apprenticeship Indenture made on the second of February 1878 between Thomas William Orr and Charles Stoneman commencing 20 July 1878 for the terms of five years ending 19 July 1883. Indenture between 'James Orr, father of Thomas William Orr ( now employed as a blacksmith with Mr. Charles Litchfield Stoneman, Coach Builder) of Sandhurst. The said James Orr (father) agrees to allow his son Thomas Orr (unclear) to ecome an apprentice to the said Charles Litchfield Stoneman to the trade or business of a blacksmith.' Pinned to front of indenture is a newspaper article, no date, re the conditions for apprentices 'have certainly changed in the last 60 odd years' and details the conditions of a coachbuilder apprenticeship in 1889. 'Taverns , inns, or alehouses he shall not haunt' and 'matrimony he shall not contract' are some of the terms of apprenticeship. Original envelope, enclosing indenture, has written on the front 'Apprenticeship Indenture, Thomas William Orr to Charles Stoneman, 1878' Royal Historical Society of Victoria, Bendigo Branch, stamped on front of envelope.document, memo, apprenticeship indenture

Photograph. Harry Biggs Collection. A copy of a photo of workers and other people standing in front of a timber building. The sign above the door of the shed - 'E. Old Blacksmith Wheelwright and Timber Merchant'. Two children are standing to the left of the group and then a man and woman each holding a child. There are 3 men, 1 holding a dog, three men holding tools and 1 young boy. A wagon wheel is to the right & a little dog. A sign on the wall says FIRE.business, retail, blacksmith & wheelwright, harry biggs collection, e. old, dingee

Among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . Bootmakers made shoes for early settlers and being leather workers also made saddles and other leather productThis hammer is typical of the type used by early settlers in Moorabbin Shire c1900 Hammer with wood handle and steel head. One side of head is rounded and the other chisel shapedearly settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

These multi function pliers were imported and used in Moorabbin Shire Many tools were imported by early settlers and also among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This pair of multi purpose pliers is typical of the type used by early settlers in Moorabbin Shire c1900 Steel adjustable locking pliers c1900 with lion head vise, and spring loaded multi grip FOREIGNadjustable pliers, early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

Elizabeth Jane Blamire, b. 1865 and Rary Emelia Isabel Blamire, b. 1863, were two of the eight children of William Blamire and Mary Ann Blamire (née Green). The Blamire family lived at Linton, where William worked as a blacksmith and painter. In 1874 they purchased Allotment 8, Section 2, Township of Linton (now 48 Sussex Street, Linton) and built a house there which was their home for many years (now demolished).Oval sepia portrait of two young ladies dressed in high necked gowns."Jane Elizabeth Blamire (Lily)(left) Mary Isabel Blamire (Millie) (right) daughters of William Blamire of Linton (No) 1632"jane elizabeth (lily) blamire, mary isabel (millie) blamire

Bendigo Trust Sub-Committee proceedings of meeting 10th Jan 1971 - sub-committee appointed to investigate status of Central Deborah Mine and possibility of opening the mine to the public by Easter 1971. List of those present for the meeting - J Watts; A Richardson; H Biggs; C Schumack; J Bright; Cr A Roy; J Cohn. Recommendations re Management of the Mine Property - Engine Room, Compressor Room, Blacksmith Shop, Changing Rooms, Workshop, Poppet Legs, Yard and Fences,organization, club/society, bendigo trust

Idylls of the King,first published between 1859 and 1885, is a cycle of twelve narrative poems by the English poet Alfred, Lord Tennyson (1809–1892) who was the Poet Laureate from 1850. It retells the legend of King Arthur, his knights, his love for Guinevere and her tragic betrayal of him. The book was given by Emmie Gibbs as a Christmas gift to Hilda Wehner. Hilda Wehner was the daughter of Herman Wehner (1862-1937) one of Orbost's early blacksmiths.A small red cloth covered book with a black motif on the cover. There is gold print on the spine.Inside- To Hilda M. Wehner from her friend Emma Gibbs wishing her the complimenst of the season Xmas 1916tennyson literature idyls-of-the-king book

Photographed outside the Wendouree Parade depot, late 1887, with 16 workmen standing or lying around the tramcar. Builders Photo. Tram is lettered "BALLAARAT TRAMWAY CO LIMITED". A sign on the advertising board says "Duncan & Fraser, Builders, Ballaarat". The men around the tram are dressed in trade clothes, with aprons, including carpenters, painters and blacksmiths. For image history etc see notes. See also Reg Items 1654 and 3042 for different prints of the same photo. Yields information about the construction, final assembly, of the original horse tram at the Ballarat depot 1887, shows the workmen who were involved.B&W photo (copy print) of Ballarat Horse Tram No. 1. Multiple copies held.765.3 - In the top left-hand corner "19", "No. 1 i n 1887", a red border sticker of printing instructions. Centrally on photo "(1) Ballarat Tramways (horse) Car No. 1 after assembly at the Ballarat depot. 1887". In the bottom right-hand corner a "William F Scott" address label. 765.4 - see image i4 for the rear of Wal Jack's photo notes and i8.trams, tramways, ballaarat tramway company, horse trams, depot, duncan & fraser , tram 1

James Leonard Foley’s family lived at ‘Warringal’, 3 Foley Street, Kew. Like many other soldiers from Kew, he was educated at the Kew State School. He enlisted at the age of 19 in March 1915. His previous occupation is recorded as 'Blacksmith'. James sent a postcard to his mother in 1915 saying that he was ‘quite well’. He was to be killed in action on the Western Front on 24 August 1916 and is buried in the Villers-Bretonneux cemetery. Poignant card from a Kew soldier in World War 1 who was later to die on the Western Front.Single page Field Service Postcard and Envelope from James Leonard Foley to Mrs Eliza Foley of 3 Foley Street in Kew. Private J.L. Foley (1600) served during World War one with the 24th Battalion. He died on the Western Front. His parents were Edward and Eliza Foley of 3 Foley Street, Kew.Mrs E Foley, 3 Foley Street, Kew, Vic [Signed] JL Foley 8/9/15first world war (1914-18), james foley, world war one, foley street, warringal, villers-bretonneux cemetery, e. foley, edward foley

The 8th Light Horse (Indi) Regiment superseded the 16th Light Horse in 1919. It had its headquarters at Benalla with sub-units throughout the Upper Murray and Northeast Victoria. In December 1941, the regiment converted from horse to mechanised, initially as 8th Reconnaissance Battalion then in July 1942 it became 8th Cavalry Regiment and served in Northern Territory. As Japanese threat to the mainland declined the regiment was disbanded.Jack Bell was a Farrier/ Blacksmith in 8th Light Horse 1930s and WW2Shows Light Horsemen of late 1930sBlack and white photograph of mounted light horseman being Trooper Jack Bell, 8th Light Horse circa 19398th, light horse, bell

c1908 view of Main Street Olinda with Dodd's store in foreground and Olinda State School up on the hill. Reverse of photograph has handwritten description by John Lundy-Clarke.Photo of Olinda taken about 1908 showing State School on skyline. Dodd’s store in foreground. Hodges blacksmith shop on roadside right. Coonara Road, then Mernda Road leads up out the picture right, Mt Dandenong Road goes down left. Range Road (the bullock track) is in immediate foreground and Sassafras turns to the right before the visible tracks on Mernda Road.olinda, jack dodd, general store, school

This bellows was used at the Warrnambool Racecourse by Master Farrier, Brian Chapman (1931-2017), during the 1970s but its history before then is still being investigated. The bellows have continued to be used from 1978 at Flagstaff Hill's blacksmith's workshop. Even today, in 2021, this same bellows are used by a volunteer blacksmith as he demonstrate the skills and tells of the importance of the blacksmith trade to colonial Australia. This 1860s double-action bellows is a typical form of blacksmith's or shipsmith's bellows. The end is forge-fitted with an iron nozzle or tube, called a tuyere or Tue iron, which concentrates the air to fan the fire or furnace. Tuyeres were traditionally made of cow horn. The double-action design of this bellows efficiently moves air both in and out of the chambers in the one movement of the long handle. The bellows was manufactured by John C. Onions of Birmingham, England, between 1862 and 1875. The stamp with the text, Gold Medal 1862, was also used on the business’ advertising. In 1875 the company was registered and began using the name John C. Onions Limited. JOHN C. ONIONS - John C. (Collingwood) Onions (1841-1904) was the son of a bellows maker of the same name. Onions (born 1841) and his wife Helen married in 1867 and they named one of their children John Collingwood Onions (1868-1913), as was the family tradition. He was well known as a Birmingham manufacturer of patented bellows and other forge-related equipment. He sold to the wholesale and retail markets for both local and overseas customers, including the British colonies. An 1862 advertisement points out that John C. Onions was a “Bellows manufacturer and contractor to Her Majesty’s Honourable Board of Ordinance” and His Imperial Majesty the Emperor of the French [Napoleon Bonaparte]”. The advertisement includes a sketched portrait of the Emperor Napoleon III, and an Imperial Autograph Letter dated May 23, 1854, from Napoleon, Palace of the Tulleries to Mr J C Onions of Bradford Street, Birmingham. In 1863 the company registered a patent on portable forges. In 1871 there were eight employees. John C. Onions Limited became a registered company in 1875. In 1876 an advertisements included that the company were smiths for hearths and tools in general and showed a row of six medallions including one with “Napoleon III, Emperor” and his portrait, and another “ _ _ _ 1862 MEDAL”. Their advertising motto was “For Excellence of Quality”. In 1885 the company merged with William Allday and Sons to become Allday and Onions. This mid-19th century bellows has local historical significance as it were once used by blacksmiths at the Warrnambool Racecourse in the annual racing event that continues today. This bellows is significant as a working example of equipment used in the 1800 and 1900s in the trace of blacksmiths and other metal working smiths. The bellows is technologically significant as it shows the progress from simple bellows to the double-action bellows, a time saving and efficient improvement. The manufacturer John C. Onions is historically significant as a family business that began in the 1600s and continued up until the 1980s.Bellows; large, oval, mechanical double-action smith’s bellows, manually operated, in working condition. The paddles of wood that form the top, middle sections and base of the bellows have flexible leather pieces attached firmly between them, forming airtight double lungs. Cut-outs in the panels allow the bellows to fill with air then force it out. A long handle is connected to pump the bellows and control the quantity and force of the air. The blasts of air are forced through the metal nozzle or tuyere at the end of the bellows and into the forge’s fire. Inscriptions are impressed into the wood on the upper paddle or board of the bellows. There are three circular stamps containing text. Text impressed in the wooden upper paddle of the bellows has been assumed to read “JOHN C. ONIONS, PATENTEES & MANUFACTURERS, BIRMINGHAM””?” “EXTRA” “AWARDED FOR EXCELLENCE OF QUALITY”, made from the following readable text :- “JOHN C ONIONS“ “PATENT - - - & MAN - - - - - - - - -“, “BIR - - - - HAM“, “ _ ERA - - - - “- XTRA-“, “- - - - - - - FOR EXCELL-“ “OF - - - - ITY” Text in the stamp “ - - ECE - - “, “ - - - - - / 1862 / MEDAL”, “- ITY” flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, john collingwood onions, john c onions, allday and onions, bellows, smith’s bellows, 19th century bellows, double-action bellows, double-acting bellows, double lung bellows, double chamber bellows, blacksmith tools, blacksmith trade, blacksmith craft, blacksmith equipment, forging equipment, john c onions patented double-action bellows, brian chapman, warrnambool racecourse, blacksmith, shipsmith, iron smith, mechanical bellows

Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This is an example of an implement used locally in the livestock industry.A branding iron with letter R on circular end. Handle loop is oval shaped. It has been painted blue to half way.branding-iron rural-industry

Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This item is an example of a common implement used in the livestock industry in Orbodt.A long-handled branding iron with an S or 2 on the end. There is a loop at the top for hanging.branding-iron rural livestock-industry

This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch

This boot was found hidden in an alcove in a chimney in one of the first houses built in Lismore Victoria during the mid 1860's. The house belonged to scottish born George Ireland Skene who settled in Lismore in mid 1857 with his wife Elizabeth (nee Nelson) and two young children. November 1857 George had built the first blacksmith shop in Grey Street Lismore and then built his house behind the smithy's. Hiding boots in chimneys is well doucumented in folklore. Old brown leather left foot childs boot. In poor condition the leather has dried out and the front centre of the boot along the eyelets has curled into the inside of boot. The holes are in tact but the laces are missing so is the tounge. The leather is stained with a white powder mildrew. The sole and heel has perished and there is a hole in the toe area.boot, shoe, leather, folklore, concealed, chimneys, hidden, magic

This tuyere (word from French origin) was used by professional blacksmiths and or cattlemen before and during the Kiewa Hydro Electricity Scheme was being constructed. The need to use a furnace or forge in the shaping of metal rods, horse shoes and pipes is both a rural necessity and a construction, on site requirement. The "inventiveness" of cattlemen and construction workers to produce metal objects not available "off the shelf" is one of the inherent traits not only of rural self sufficiency but in the "pioneer" days of rural isolation one of survival.This tuyere is of great significance to the Kiewa Valley and its regions because it highlights one of the greatest strengths of the rural (especially isolated) life and its folk living there, and that is the great human factor of adaptability and survival techniques in sometimes harsh and demanding environmental circumstances. The inventiveness and the attitude, "she'll be right mate", demonstrates life on the land where specialised blacksmith activities can be found in non "professionals" because of the fact that "someone" has to do the job. This is one of the differences between country "rural" life and that found in cities and larger towns.This iron cone shaped tuyere has a small hole (diamenter 25mm) starting within an ever enlarging cone (amplification of the air pressure going through) delivering varying hot or extremely hot air into a furnace or hearth which intensifies the heat to allow the "shaping" of metal objects. The larger "flared" cone extension allows for the directed air to be spread and not concentrated.blacksmith tool, tue, bellows, fashioning metal, forge manufacturing process

In the Middle Ages double-acting bellows was introduced. It had 2 parts, one operated by hand or foot, the other took air from it and was weighted so it forced air out while the part was filling. Blacksmithing is the shaping of hot iron and steel, usually by hammering. Very hot fires were produced by 1.a hot air blast. 2. burning charcoal (not wood). Bellows were used to make tools, fix equipment including machinery, drays, carriages, harnesses etc. Farmers in the Kiewa Valley often had their blacksmith forge. They made their own tools, were able to mend equipment, drays etc., gates, and most items that were made of iron and steel.Large Double Acting bellow with wooden top and bottom, shaped like a 'water drop' - narrow at one end and broad at the other. The wood is held by strips of wood and leather bound and placed around the perimeter. The wood on the top side has inscriptions (illegible). The wood on the bottom side has a rectangular hole. The narrow end feeds into a pipe to enable the fire to receive a hot blast of air. When the bellow is squeezed it allows both pieces of wood to be pushed together.Illegibleblackmiths, bellows, double acting bellow

This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This handmade tool was made for the particular purpose of joining sheets of metal together. The metal formed in this way could be used for water tanks, boilers and other similar items. It is an example of the equipment made and used in the trades of a metalsmith and blacksmith in the 19th and early 20th centuries.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch

The wagga was owned by the great uncle of the donor's husband, George Stephens. Mr Stephens was a mining engineer in the late 1800s to early 1900s in Stawell, Main Lead (near Beaufort), Diamond Creek and Costerfield in Victoria. His last residence was at Bosterfield, where the wagga was used as a bed quilt in the mid 1940s. It may have also been used in the childhood home of Mr Stephens at Stawell. Mr Stephens saved the life of a blacksmith at Diamond Creek Gold Mine circa 1910.A wagga made from men's suits and coats, unpicked and sewn together. Pieces are in blue, brown checked and striped materials. There are remnants of a backing around the edges.wagga, running stitch collection, diamond creek, victoria, stawell, beaufort, costerfield

Emma Thomas Collection: Items were owned by Emma Courtis, nee Thomas (1854-3/3/1937. Family lived in Hamelin St, White Hills. Clothing items possibly made by Emma or a local person in White Hills area and used around 1890s. Emma's family include Elizabeth Penrose (mother), Solomon Thomas (father), and Richard Courtis, a blacksmith (her husband). Richard Courtis married Emma Thomas in 1875 and they moved to Melbourne in 1922.Three digital photographs relating to Emma Thomas. a. Emma in her later years but no date recorded. b. The wedding photo is of Emma and Richard's daughter, Ada, who married Hedley Thomas. Donor's grandfather, Richard, is seventh in the third row from the left. He had a moustache then, but she remembers him as a bald man with round glasses. Richard and Emma Courtis are in the third row, fourth, and fifth from the left of the photo. c. Headstone of Emma and Richard who died in Melbourne and are buried there.emma thomas, emma courtis, richard courtis

Dr Donaldson (Snr) owned the block of land on the corner of Sussex and Grant Streets, Linton. He had a ten-room house set on the back of the block (where the block backs on to Surrey Street), with a large barn fronting Sussex Street. Other identifiable buildings in the photograph are Ball Brothers blacksmith's shop, the Royal Standard Hotel on the corner of Sussex and Clyde Streets, the Shire Hall, Criterion House and Joseph Shepherd's store. The roof of Oscar Ball's house can be seen.Black and white copy of original photograph which shows houses and other buildings along Sussex Street. The view is to the south (up the hill) from the Ballarat entrance to Linton. A large barn, enclosed by a picket fence, is in the foreground. A cart drawn by two horses, with a man standing next to it, is in the street near the barn. Further along the street, a group of people appear to be wheeling a barrow or cart. Houses and other buildings can be seen along the street.sussex street linton, dr donaldson's barn, ball bros. blacksmith, royal standard hotel, shire of grenville offices linton, criterion house, joseph shepherd's store